A

Arlt, Olga (2015):
Regulation der Sphingolipide und Entzündungsprozesse in immunologisch relevanten Zellen.
TU Darmstadt,
[Ph.D. Thesis]

Arabnejad, S. ; Pouriayevali, Habib ; Lim, Gin Sum ; Cheong, Davy W. C. ; Shim, V. P. W. (2014):
Interphase and Aggregation, Two Effective Parameters on Mechanical Behavior of polymer Nanocomposites.
In: International Journal for Multiscale Computational Engineering, 12 (2), pp. 115-125. [Article]

Albrecht, Katharina ; Gerber, Paul ; Langer, Ingmar ; Sarnes, Julian ; Sprenger, Susanne ; Stocker, André
Stelzer, Ralph (ed.) (2014):
Die Bedeutung von Prototypen für den Lernerfolg von interdisziplinären studentischen Produktentwicklungsprojekten.
In: ENTWERFEN ENTWICKELN ERLEBEN 2014, In: Beiträge zur virtuellen Produktentwicklung und Konstruktionstechnik, pp. 756-767, Dresden, Verlag der Wissenschaften GmbH, ISBN 978-3-944331-67-6,
[Book Section]

Abele, Eberhard ; Schiffler, Andreas ; Rothenbücher, Stefan (2007):
Kombinierte Magnet-Wälz-Lager in Motorspindeln.
In: wt Werkstattstechnik online, 97 (1/2), pp. 73-78. Springer-VDI-Verlag, e-ISSN 1436-4980,
[Article]

Artel, Jens ; Becker, Wilfried (2005):
Coupled and uncoupled analyses of piezoelectric free-edge effect in laminated plates.
In: Composite Structures, 69, pp. 329-335. [Article]

Artel, J. ; Becker, Wilfried (2004):
On the free-edge effect in piezoelectric laminated plates.
In: PAMM Proceedings in Applied Mathematics and Mechanics, 4, pp. 181-182, [Conference or Workshop Item]

Abele, Eberhard ; Kluge, Jürgen
McKinsey und Company, Düsseldorf (ed.) (2003):
HAWK 2015 : Herausforderung automobile Wertschöpfungskette ; wissensbasierte Veränderung der automobilen Wertschöpfungskette.
In: Materialien zur Automobilindustrie, 30, Berlin, Frankfurt am Main, VDA, [Book]

Artel, J. ; Becker, Wilfried ; Selinger, V. ; Stolten, D. ; Mergel, J. (2003):
Structural analysis and optimization of DMFC stack components.
In: Proceedings / 2nd European PEFC Forum : 30 June - 4 July 2003, Lucerne, Switzerland / ed. by Detlef Stolten ... Vol. 2 : Detlef Stolten ; Bernd Emonts European PEFC Forum <2, 2003, Luzern>.- Oberrohrdorf : European Fuel Cell Forum, [2003], S. 575-584, Oberrohrdorf, European Fuel Cell Forum, [Conference or Workshop Item]

Adamová, D. ; Agakichiev, G. ; Appelshäuser, H. ; Belaga, V. ; Braun-Munzinger, P. ; Yurevich, V. V. ; Castillo, A. ; Cherlin, A. ; Damjanovic, S. ; Dietel, T. ; Dietrich, L. ; Drees, A. ; Esumi, S. I. ; Filimonov, K. ; Fomenko, K. ; Fraenkel, Z. ; Garabatos, C. ; Glässel, P. ; Hering, G. ; Holeczek, J. ; Kushpil, V. ; Lenkeit, B. ; Ludolphs, W. ; Maas, Axel ; Marin, A. ; Milosevic, J. ; Milov, A. ; Miskowies, D. ; Panebrattsev, Yu. ; Petchenova, V. ; Petrácek, V. ; Pfeiffer, A. ; Rak, J. ; Ravinovich, I. ; Rehak, P. ; Richter, M. ; Sako, H. ; Schmitz, W. ; Schukraft, J. ; Sedykh, S. ; Shimansky, S. ; Slivová, J. ; Specht, H. J. ; Stachel, J. ; Sumbera, M. ; Tilsner, H. ; Tserruya, I. ; Wessels, J. P. ; Wienold, T. ; Windelband, B. ; Wurm, J. P. ; Xie, W. ; Yurevich, S. (2003):
Universal pion freeze-out in heavy-ion collisions.
In: Physical Review L, 90, pp. 022301-1. [Article]

Ackermann, Christiane (2002):
Die Bewertung der Rezyklierbarkeit von grafischen Druckerzeugnissen.
In: Wochenblatt für Papierfabrikation, 130, pp. 908-919. [Article]

Ackermann, T. ; Markert, Richard ; Wegener, G. ; Wiese, D. (1997):
Reduktion der doppelt umlauffrequenten Schwingungen von anisotropen Walzen.
In: Schwingungen in rotierenden Maschinen IV : Referate der Tagung an der Universität GH Kassel, pp. 130-139,
Braunschweig (u.a.), Vieweg, Fachtagung Schwingungen in Rotierenden Maschinen, Kassel, ISBN 3528069082,
[Conference or Workshop Item]

Ackermann, Dieter (1996):
Genetische Untersuchung der Ligandensubstitution an oktaedrischen Eisen(III)-Komplexen des Typs FeL(X) 2 (X=einzähniger Ligand).
Darmstadt: 1996. VIII, 167 Bl., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Avril, Klaus (1996):
Einfluß einer uniaxialen Anisotropie auf die 1. Suhl-Instabilität und magnetische Musterbildung oberhalb der Schwelle.
Darmstadt: 1996. 80 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

B

Berz, Florian (2013):
Entwicklung eines Systems zur Zustandsschätzung für einen teleoperierten Humanoidroboter.
Darmstadt, Technische Universität Darmstadt, Studienbereich Computational Engineering, [Bachelor Thesis]

Becker, Tobias (2010):
Extension of a Multi-Robot-Simulation by ODE based Dynamics-Simulation and its Evaluation.
Darmstadt, Technische Universität Darmstadt, Department of Computer Science, [Bachelor Thesis]

Bhayaraju, Umesh Chandra (2008):
Liquid sheet breakup and characterisation of plane prefilming and nonprefilming atomisers.
2008,0, Köln, DLR, Bibliotheks- und Informationswesen, TU Darmstadt,
[Ph.D. Thesis]

Bommaraju, Chakrapani ; Marklein, René ; Schuhmann, Rolf ; Weiland, Thomas (2006):
A Novel Low-Dispersive (2,2) Collocated FDTD Scheme.
In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields Proceedings of the 2005 Workshop on Computational Electromagnetics in Time-Domain (CEM-TD), 20 (1), pp. 17-33. [Article]

Balzani, D. ; Schröder, J. ; Gross, Dietmar (2005):
Modeling of anisotropic hyperelasticity and discontinous damage in arterial walls based on polyconvex stored energy functions.
In: Computational fluid and solid mechanics 2005 : proceedings, Third MIT Conference on Computational Fluid and Solid Mechanics, June 14 - 17, 2005 / ed.: K. J. Bathe. - 1. ed.. - Amsterdam ; Heidelberg [u.a.] : Elsevier, 2005 ISBN: 0-08-044476-8, 1. ed.. - Amsterdam ; Heidelberg [u.a.], Elsevier, [Conference or Workshop Item]

Baaser, Herbert (2005):
Über die Verteilung der Radialkraft auf einer Riemenscheibe.
2/HBaa, Weinheim, Weinheim, [Report]

Balzani, D. ; Schröder, J. ; Gross, Dietmar (2005):
Modeling of anisotropic damage in arterial walls.
In: Proceedings in applied mathematics and mechanics : PAMM, 5, pp. 287-288, [Conference or Workshop Item]

Baaser, Herbert ; Häusler, O. ; Ziegler, C. (2005):
Modellierung des elastomeren Werkstoffverhaltens unter Berücksichtigung der Spannungserweichung.
In: Tagungsband / 17. Deutschsprachige ABAQUS-Benutzerkonferenz 2005 : 19. - 20. September 2005, Nürnberg / [Organisation: ABAQUS Deutschland GmbH]. - Aachen [u.a.] : ABAQUS Deutschland GmbH, 2005, 20. September 2005, Nürnberg / [Organisation, ABAQUS Deutschland GmbH]. - Aachen [u.a.] : ABAQUS Deutschland GmbH, [Conference or Workshop Item]

Baaser, Herbert (2005):
Global optimization of length and macro-micro transition of fabric-reinforced elastomers with application to a brake hose.
In: 1st GACM Colloquium for Young Scientists on Computational Mechanics : Ruhr University Bochum, Germany, Oct 5 - 7, 2005 / Hackl, Klaus. - Bochum : German Association for Computational Mechanics, 2005, Bochum, German Association for Computational Mechanics, [Conference or Workshop Item]

Balzani, D. ; Schröder, J. ; Gross, Dietmar ; Neff, P. (2005):
Modeling of anisotropic damage in arterial wallls based on polyconvex stored energy functions.
In: Computational plasticity / ed. by: D. R. J. Owen ...Teil: 2. Ausgabe: 1. ed. - Barcelona : International Center for Numerical Methods in Engineering (CIMNE), 2005, s. 802-805 . - ISBN: 84-95999-79-X, Barcelona, International Center for Numerical Methods in Engineering (CIMNE), [Book Section]

Becker, Wilfried ; Hebel, Jochen ; Engels, H. (2005):
Laminat-Pflaster-Verstärkungen und deren Optimierung aus strukturmechanischer Sicht.
In: Jahrbuch ... der Deutschen Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V. (DGLR)., 2005, pp. 046. [Article]

Benje, Peter (2004):
Frühe Sägemaschinen, Möbelfabriken und Dampftischlereien in Bremen : die Einführung von Holzbearbeitungsmaschinen in das Tischlergewerbe Bremens im 19. Jahrhundert.
Selbstverlag, [Book]

Baaser, Herbert (2004):
Anmerkungen zur Simulation von entfestigendem Materialverhalten.
8, Darmstadt, Technische Universität, TU Darmstadt, ISBN 3-935868-08-1,
[Habilitation]

Berezin, Y. A. ; Hutter, Kolumban (2004):
Waves on viscoelastic films.
In: Rheologica Acta, 44, pp. 112-118. [Article]

Berezin, Y. A. ; Osinov, V. A. ; Hutter, Kolumban (2004):
Plane waves in a hypoplastic half-space under periodic boundary conditions.
In: Continuum Mechanics and Thermodynamics, 16, pp. 3-14. [Article]

Balzani, D. ; Schröder, J. ; Gross, Dietmar (2004):
A simple model for anisotropic damage with application to soft tussues.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, pp. 236-237, [Conference or Workshop Item]

Becker, Wilfried ; Hansel, W. (2003):
Gewichtsoptimierung von Laminat-Leichtbaustrukturen.
In: 10 Jahre FOMAAS : Rückblick und Vorschau ; Festschrift zum Jubiläums-Kolloquium am 8. November 2002 / [Universität Siegen; FOMAAS, Analyse, Simulation & Optimierung Komplexer Systeme]. Hans Eschenauer; Wolfgang Wiechert (Hrsg.) Forschungszentrum für M, Siegen, Universität, [Conference or Workshop Item]

Bäumer, Christian ; Frekers, D. ; Grewe, E.-W. ; Haefner, P. ; Hofmann, F. ; Junk, B. C. ; Korff, A. ; Neumann-Cosel, Peter von ; Rakers, S. ; Richter, Achim (2003):
Untersuchung isovektorieller Spin-Flip-Übergänge von Kernen der pf-Schale mittels der (d,2 He)-Reaktion.
In: Verhandlungen der Deutschen Physikalischen Gesellschaft <Frühjahrstagung Tübingen> ; Reihe 6, Bd. 38(2003),3, S. 61, [Conference or Workshop Item]

Baaser, Herbert ; Tvergaard, (2003):
A new algorithmic approach treating nonlocal effects at finite rate-independent deformation using the Rousselier damage model.
In: Computational methods in applied mechanics and engineering, 192, pp. 107-124. [Article]

Baaser, Herbert ; Gross, Dietmar (2003):
Analysis of void growth in a ductile material in front of a crack tip.
In: Computational materials science, 26, pp. 28-35. [Article]

Baaser, Herbert ; Gross, Dietmar (2003):
Remarks on the use of continuum damage models and on the limitations of their applicability.
In: Deformation and failure in metallic materials / Kolumban Hutter ... (Eds.) Berlin [u.a.] : Springer, 2003.- (Lecture Notes in Applied and Computational Mechanics ; 10), S. 345-362, [Article]

Bäuerle, E. ; Chubarenko, B. ; Chubarenko, I. ; Halder, J. ; Hutter, K. ; Wang, Yongqi (2002):
Autumn physical limnological experimental campaign in the Mainau Island littoral zone of Lake Constance (12 October-19 November 2001) : report on field experiments.
Darmstadt, TU, Fachbereich Mechanik, [Book]

Blinkova, Natalia (2002):
Plane unsteady inviscid incompressible hydrodynamics of a thin elastic profile.
7, Darmstadt, Technische Universität, Inst. für Mechanik, TU Darmstadt,
[Ph.D. Thesis]

Baaser, Herbert ; Gross, Dietmar (2002):
A Comparative study on the limitatios of damage models in ductile fracture mechanics.
In: Proceedings of the Canadian Conference on Nonlinear Solid Mechanics <2, 2002, Vancouver>. - Vancouver, 2002, [Conference or Workshop Item]

Becker, Wilfried ; Gross, Dietmar (2002):
Mechanik elastischer Körper und Strukturen.
Berlin [u.a.], Springer-Verl., ISBN 3-540-43511-5,
[Book]

Baaser, Herbert ; Gross, Dietmar (2002):
On the limitations of {CDM} approaches to ductile fracture problems.
In: Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V) <5, 2002, Vienna>. Eds.: Mang, H.A. ; Rammerstorfer, F.G. ; Eberhardsteiner, J.. - Wien: Univ. of Technol., 2002. Invited Paper ISBN 3-9501554-0-6, Wien, Univ. of Technol., [Conference or Workshop Item]

Bibel, Wolfgang (2002):
Bedeutung und Ursprünge der Intellektik.
In: KI, Künstliche Intelligenz, p. 51. [Article]

Berger, Christina ; Hoche, Holger ; Broszeit, Erhard (2002):
Verbesserung des Korrosions- und Verschleißschutzes von Leichtmetallen durch Chromnitridbeschichtung bei anwendungsorientierten höheren Temperaturen.
In: DECHEMA - Tätigkeitsbericht, In: Forschungsförderung : Kurzberichte über Forschungsarbeiten, die aus Mitteln der Arbeitsgemeinschaft industrieller Forschungsvereingungen e.V. (AiF) und der Max-Buchner-Forschungsstiftung gefördert worden sind, 2001, pp. 197-201. DECHEMA e.V., [Article]

Berezin, Y. A. ; Osinov, V. A. ; Hutter, K. (2001):
Evolution of plane disturbances in hypoplastic granular materials.
In: Continuum mechanics and thermodynamics, 13, pp. 79-90. [Article]

Baral, Dambaru Raj ; Hutter, K. (2001):
Asymptotic theories of ice sheets and ice shelves.
In: Geomorphological fluid mechanics. Hrsg.: N.J. Balmforth, A. Provenzale. - Berlin (u.a.): Springer, 2001. S. 227-278, Berlin (u.a.), Springer, [Book Section]

Baral, Dambaru Raj ; Hutter, K. ; Greve, R. (2001):
Asymptotic theories of large-scale motion, temperature, and moisture distribution in land-based polythermal ice sheets: a critical review and new developments.
In: Applied mechanics reviews, 54, pp. S. 215-256. [Article]

Baaser, Herbert ; Gross, D. (2001):
3D Nonlocal simulation of ductile crack growth - a numerical realization.
In: Revue europeenne des elements finis, 10, pp. 353-367. [Article]

Baaser, Herbert ; Gross, D. (2001):
Grenzen und Einschränkugen von FE-Analysen mit schädigungsmechanischen Materialmodellen.
In: Numerische Methoden der Plastomechanik: Workshop <7, 2001, Neustadt am Ruebenberge>; Tagungsbd., [Conference or Workshop Item]

Berg, Marcus (2001):
Ein Wanderwellenmotor mit Zylindrischem Stator: Mathematische Modellierung und experimentelle Untersuchung.
Darmstadt, Technische Universität, Technische Univ. Darmstadt,
[Ph.D. Thesis]

Bauer, Georg (2000):
Thermodynamische Betrachtung einer gesättigten Mischung.
Darmstadt, Technische Universität, TU Darmstadt,
[Ph.D. Thesis]

Basista, M. ; Gross, D. (2000):
A note on crack interactions under compression.
In: International journal of fracture, 102, pp. L67-L72. [Article]

Berezin, Y. A. ; Hutter, K. ; Spodareva, L. A. (2000):
Evolution of disturbances on shallow layers of non-Newtonian fluids.
In: Physica D, 139, pp. 319-334. [Article]

Baaser, Herbert ; Gross, D. (2000):
Crack analysis in ductile cylindrical shells using GURSONs model.
In: International journal of solids and structures, 37, pp. 7093-7104. [Article]

Baaser, Herbert (2000):
A new algorithmic approach treating nonlocal effects at finite rate-independent deformation using the ROUSSELIER damage model.
647, Lyngby, Techn. Univ. of Denmark, [Book]

Bayreuther, C. ; Miehe, C. ; Schröder, J. (2000):
Konzept zur Bestimmung makroskopischer Moduli von Verbundmaterialien.
In: Zeitschrift für angewandte Mathematik und Mechanik, 80, pp. S373-S374. [Article]

Bayreuther, C. ; Miehe, C. ; Schröder, J. (2000):
Aspects of homogenization techniques and multigrid solving.
In: Multified problems: state of the art. Hrsg.: A.-M. Sändig, W. Schiehlen, W.L. Wendland. - Berlin, Heidelberg (u.a.): Springer, 2000. S. 88-95, Berlin, Heidelberg (u.a.), Springer, [Book Section]

Baaser, Herbert (1999):
Dreidimensionale Simulation duktiler Schädigungsentwicklung und Rißausbreitung.
Darmstadt, Techn. Univ., TU Darmstadt,
[Ph.D. Thesis]

Baral, Dambaru Raj (1999):
Asymptotic theories of large scale motion, temperature and moisture distributions in land based polythermal ice shields and in floating ice shelves: a critical review and new developments.
Darmstadt, Techn. Univ., TU Darmstadt,
[Ph.D. Thesis]

Baral, Dambaru Raj ; Hutter, K. (1999):
An iterative solution procedure for shallow Stokes flow: the shallow ice approximation revisited.
In: Advances in cold-region thermal engineering and sciences. Hrsg.: K.Hutter, Y. Wang, H. Beer. Berlin, Heidelberg (u.a.): Springer, 1999. S. 273-284 (Lecture notes in physics; 533), [Book Section]

Baaser, Herbert ; Gross, D. (1999):
3D-simulation of ductile crack growth.
In: Boundary element technology XIII. Hrsg.: C.S. Chen, C.A. Brebbia, D.W. Pepper. Southampton: WIT Press, 1999. S. 587-596, [Book Section]

Baaser, Herbert ; Gross, D. (1999):
3D-Simulation des duktilen Rißwachstums.
In: Tagung des DVM-Arbeitskreises Bruchvorgänge <31, 1999, Darmstadt>. Berlin: DVM, 1999. S. 99-108 (DVM-Bericht; 231), [Conference or Workshop Item]

Basista, M. ; Gross, D. ; Lauterbach, B. (1999):
Micro- and macromechanical modeling of inelastic brittle materials under compression.
In: Micro- and macrostructural aspects of thermoplasticity. Hrsg.: O.T. Bruhns (u.a.) Dordrecht: Kluwer Acad. Publ., 1999, S. 157-166, [Book Section]

Berg, M. ; Hagedorn, Peter (1999):
Experimental verification of non-linear behavior of monolithic PZT cylinders.
In: Statusseminar Technische Anwendungen von Erkenntnissen der Nichtlinearen Dynamik. (1999 Frankfurt). Düsseldorf: VDI-Verl., 1999. S. 295-300, [Conference or Workshop Item]

Bingenheimer, Klaus (1998):
Die Luftheizungen des Mittelalters: zur Typologie und Entwicklung eines technikgeschichtlichen Phänomens.
17, Hamburg: Kovac, 1998. 424 S, Hamburg, Kovac, TU Darmstadt,
[Ph.D. Thesis]

Bettmann, Thomas (1998):
Dezentrale Regenwasserbewirtschaftung und deren Auswirkungen auf die Regenwasserbehandlung in urbanen Gewässereinzugsgebieten: dargestellt am Beispiel der Regenwassernutzung in privaten Haushalten.
104, Darmstadt: Inst. für Wasserbau u. Wasserwirtschaft, 1998. Getr. Zählung, Darmstadt, Inst. für Wasserbau u. Wasserwirtschaft, TU Darmstadt,
[Ph.D. Thesis]

Benjes, Magnus (1998):
Ein zweiparametriges Kniemodell: eine Untersuchung zur Kniegelenkskinematik, basierend auf Messungen an 23 Kniegelenken.
Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Bach, Hartmut ; Bork, ; Markert, Richard (1998):
Fault determination for the example of a cracked rotor.
In: Zeitschrift für angewandte Mathematik und Mechanik. 78 (1998), Suppl. 2, S. 241-242, [Article]

Baaser, Herbert ; Gross, D. (1998):
Damage and strain localisation during crack propagation in thin-walled shells.
In: European Mechanics of Materials Conference <2, 1998, Magdeburg>: Proceedings. Hrsg.: A. Bertram (u.a.), EDP Sciences 1998, EDP Sciences 1998, EDP Sciences 1998, [Conference or Workshop Item]

Berg, M. ; Hagedorn, Peter ; Sattel, T. (1998):
Comparison of experimental and simulation data of ultrasonic traveling wave motors.
In: ACTUATOR 98: International Conference on New Actuators <6, 1998, Bremen>: Proceedings. S. 43, 253-255, [Conference or Workshop Item]

Bach, Hartmut ; Hiller, ; Markert, Richard (1998):
Representation of rotor-stator-rub in terms of equivalent forces for model based diagnostics.
In: International Conference on Acoustical and Vibratory Surveillance Methods and Diagnostic Techniques <3, 1998>: Proceedings. - Senlis, France: CETIM, 1998. S. 723-732, Senlis, France: CETIM, 1998, Senlis, France, CETIM, [Conference or Workshop Item]

Berezin, Y. A. ; Hutter, K. ; Spodareva, L. A. (1998):
Stability properties of shallow granular flows.
In: International journal of non-linear mechanics. 33 (1998), S. 647-658, [Article]

Berezin, Y. A. ; Hutter, K. ; Spodareva, L. A. (1998):
Stability analysis of gravity driven shear flows with free surface for power-law fluids.
In: Archives of applied mechanics. 68 (1998), S. 169-178, [Article]

Böhme, Gernot (1997):
Die Atmosphäre einer Stadt.
In: Von Innen nach außen: Stadtentwicklung ohne Stadt? S. 15-24, Weimar: Bauhaus-Univ., 1997, Weimar, Bauhaus-Univ, [Book Section]

Bach, Hartmut ; Markert, Richard (1997):
Positionsbestimmung von Schäden innerhalb der modellgestützten Zustandsüberwachung.
In: Monitoring und Diagnose in energietechnischen Anlagen: Tagung Braunschweig, Okt. 1997. - Düsseldorf: VDI-Verl., 1997. S. 601-610, 1359, Düsseldorf: VDI-Verl., 1997, Düsseldorf, VDI-Verl, [Conference or Workshop Item]

Bauer, Georg (1997):
Thermodynamische Betrachtung einer gesättigten Mischung.
Darmstadt: 1997. VII, 126 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Beckmann, Christoph (1997):
Internationalisierung von Forschung und Entwicklung in multinationalen Unternehmen.
Aachen: Shaker, 1997. XI, 295 S., Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Bach, Hartmut ; Markert, Richard (1997):
Determination of the fault position in rotors for the example of a transverse crack.
In: Structural health monitoring. Hrsg.: F.-K. Chang. - Lancaster and Basel: Technomic Publ.,1997. S. 325-335, Lancaster and Basel: Technomic Publ., 1997, Lancaster and Basel, Technomic Publ, [Book Section]

Basista, M. ; Gross, D. (1997):
The sliding crack model of brittle deformation : an internal variable approach.
In: International journal of solids and structures. 35 (1997), S. 487-509, [Article]

Baaser, Herbert ; Hohe, ; Gross, D. (1997):
Ductile crack growth analysis using the Gurson damage model.
In: Problems in environmental and damage mechanics. Hrsg.: W. Kosinski (u.a.) S. 139-147, Warszawa: Inst. Podstawowych Problemow Techniki, 1997, Warszawa, Inst. Podstawowych Problemow Techniki, [Book Section]

Berezin, Y. A. ; Hutter, K. (1997):
On large-scale vortical structures in (incompressible) fluids with thermal expansion.
In: Mathematical models and methods in applied sciences. 7 (1997), S. 113-123, [Article]

Basista, M. ; Gross, D. (1997):
Internal variable representation of microcrack induced inelasticity in brittle materials.
In: International journal of damage mechanics. 6 (1997), S. 300-316, [Article]

Berezin, Y. A. ; Hutter, K. ; Spodareva, L. A. (1997):
On stability of rapid granular shear flows.
In: Continuum mechanics and thermodynamics. 9 (1997), S. 229-240, [Article]

Boine-Frankenheim, Oliver (1996):
Energieverlust von schweren Ionen in Plasmen.
Darmstadt: 1996. 99 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Becker, Jens (1996):
Untersuchungen der Spindynamik in den zweidimensionalen Antiferromagneten Bariumnickelphosphat und Manganthiophosphat.
Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Becker, Wilfried ; Gross, ; Schönfeld, ; Gross, ; Schönfeld, (1996):
Closed-form analysis of the temperature-induced bending deformations of parabolic sandwich reflectors.
In: Zeitschrift für Flugwissenschaften und Weltraumforschung. 20 (1996), S. 194-198, [Article]

Bobrich, Joachim (1996):
Ein neuer Ansatz zur kartographischen Verdrängung auf der Grundlage eines mechanischen Federmodells.
455, München: Verl. der Bayer. Akad. der Wiss., 1996. 75 S., München, Verl. der Bayer. Akad. der Wiss, TU Darmstadt,
[Ph.D. Thesis]

Boersma, Andries (1995):
Parallele Finite-Elemente-Methoden in der Festkörpermechanik und ihre Lösung mit algebraischen Mehrgitterverfahren.
Darmstadt: 1995. 112 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Berezin, Y. A. ; Hutter, K. (1995):
On vortex air motions above an axisymmetric source of mass, momentum and heat.
In: Journal of fluid mechanics. 290 (1995), S. 299-317, [Article]

Bernspang, L. ; Küssner, ; Wriggers, P. ; Samuelson, (1995):
The consistent strain method in finite element plasticity.
In: Computers & structures. 54 (1995), S. 27-33, [Article]

Balan, C. ; Hutter, K. (1995):
A procedure to determine the material constants and the viscosity function for a fluid with yield shear stress.
In: Acta mechanica. 109 (1995), S. 65-78, [Article]

Bauer, Georg ; Diebels, ; Hutter, K. (1995):
Nonlinear internal waves in ideal rotating basins.
In: Geophysical and astrophysical fluid dynamics. 78 (1995), S. 21-46, [Article]

C

Cui, Jian (2013):
Body-fitting Meshes for the Discontinuous Galerkin Method.
TU Darmstadt,
[Ph.D. Thesis]

Chen, Bingqing ; Li, Yan ; Yi, Min ; Li, Ran ; Pang, Shujie ; Wang, Hui ; Zhang, Tao (2012):
Optimization of mechanical properties of bulk metallic glasses by residual stress adjustment using laser surface melting.
In: Scripta Materialia, 66 (12), pp. 1057-1060. ISSN 13596462,
[Article]

Chrigui, M. ; Sadiki, A. ; Janicka, J. ; Hage, M. ; Dreizler, A. (2011):
Experimental and numerical analysis of spray dispersion and evaporation in a combustion chamber CHAMBER.
In: Atomization and Sprays, 19 (10), pp. 929-955. Begell, ISSN 1044-5110,
DOI: 10.1615/AtomizSpr.v19.i10.30,
[Article]

Corzilius, B. ; Gembus, A. ; Weiden, N. ; Dinse, Klaus-Peter ; Hata, K. (2006):
EPR characterization of catalyst-free SWNT and N@C60-based peapods.
In: physica status solidi (b), 243, pp. 3273-3276. [Article]

Canto Pereira, do L. H. M. ; Paramei, Galina V. ; Morya, E. ; Ranvaud, R. D. (2006):
Inhibition or facilltation of return : Does chromatic component count?
In: Visual Neuroscience, 23, pp. 489-493. [Article]

Cox, N. B. ; Gao, H. ; Gross, Dietmar ; Rittel, D. (2005):
Modern topics and challenges in dynamic fracture.
In: Journal of the Mechanics and Physics of Solids, 53, pp. 565-596. [Article]

Chiou, Min-Ching (2005):
Modelling dry granular avalanches past different obstruct [Elektronische Ressource] : numerical simulations and laboratory analyses.
12, Darmstadt, Inst. für Mechanik, TU Darmstadt, ISBN 3-935868-12-X,
[Ph.D. Thesis]

Chrzanowska, Agnieszka ; Ehrentraut, Harald (2003):
Dissipation influence on colling of 2-dimensional hard needle systems.
In: Dynamic response of granular and porous materials under large and catastrophic deformations. Eds.: Kolumban Hutter und Nina Kirchner. (Lecture notes in applied and computational mechanics ; 11). - Berlin [u.a.]: Springer, 2003, S. 315-341, Berlin [u.a.], Springer, [Book Section]

Chugunov, V. ; Gray, J. M. N. T. ; Hutter, Kolumban (2003):
Group theoretic methods and similarity solutions of the Savage-Hutter equations.
In: Dynamic Response of Granular and Porous Materials under Large and Catastrophic Deformations (Eds. K. Hutter and N. P. Kirchner).- Berlin, Springer, 2003, S. 251-261, [Article]

Chrzanowska, Agnieszka ; Ehrentraut, Harald (2003):
Dissipation influence on cooling of 2-dimensional hard needle systems.
In: Dynamic Response of Granular and Porous Materials under Large and Catastrophic Deformations (Eds. K. Hutter and N. P. Kirchner) .- Berlin, Springer, 2003, S. 315-341., [Article]

Chubarenko, Irina ; Chubarenko, Boris ; Bäuerle, Erich ; Wang, Yongqi ; Hutter, Kolumban (2003):
Autumn physical limnological experimental campaign in the Island Mainau littoral zone of Lake Constance.
In: Journal of Limnology, 62 (1), pp. 115-119. ISSN 1723-8633,
[Article]

Chrzanowska, Agnieszka ; Ehrentraut, Harald (2002):
Velocity correlations of two-dimensional hard needles from molecular dynamics.
In: Physical review E, 66, pp. 012201. [Article]

Chrzanowska, Agnieszka ; Ehrentraut, Harald (2002):
Oriental and translational cooling in two dimensional systems of granular needles.
In: Technische Mechanik, 22, pp. 56-65. [Article]

Chugonov, V. A. ; Hutter, K. ; Eskin, L. D. (2002):
Thin films of non-Newtonian fluids with jump discontiunuities.
In: Geometrical theory of functions, boundary problems and their applications. Proceedings of the Lobachevski Mathematical Center ; 14. - Kazan, 2002, S. 315-351, [Conference or Workshop Item]

Chugonov, V. A. ; Gray, J. M. N. T. ; Hutter, K. (2002):
Some invariant solutions of the Savage-Hutter model for granular avalanches.
In: Proceedings of the Institute of Mathematics of NAS of Ukraine, 43, pp. 111-119, [Conference or Workshop Item]

Chiesa, M. ; Skallerud, B. ; Gross, Dietmar (2002):
Closed form line spring yield surfaces for deep and shallow cracks : formulation and numerical performance.
In: Computers and structures, 80, pp. 533-545. [Article]

Chrzanowska, A. ; Teixeira, P. I. C. ; Ehrentraut, H. ; Cleaver, D. J. (2001):
Ordering of hard particles between hard walls.
In: Journal of physics: Condensed matter, 13, pp. 4715-4726. [Article]

Chen, M. ; Knospe, C. ; Markert, Richard (2001):
Power consumption and disturbance regulation in active magnetic suspensions: an experimental study.
In: International Symposium on Magnetic Suspension Technology <6, 2001, Turin, Italy>: Proceedings. S. 151-156, [Conference or Workshop Item]

Chubarenko, Boris V. ; Wang, Yongqi ; Chubarenko, Irina P. ; Hutter, Kolumban (2000):
Barotropic wind-driven circulation patterns in a closed rectangular basin of variable depth influenced by a peninsula or an island.
In: Annales Geophysicae, 18 (6), pp. 706-727. Springer, ISSN 0992-7689,
DOI: 10.1007/s00585-000-0706-6,
[Article]

Chen, B. ; Gross, (1998):
Dynamic stress intensity factors of penny-shaped crack subjected to an annular impact.
In: Zeitschrift für angewandte Mathematik und Mechanik. 78 (1998), S. 861-864, [Article]

Calov, R. ; Marsiat, (1998):
Simulations of the Northern Hemisphere through the last glacial-interglacial cycle with a vertically integrated and a three-dimensional thermomechanical ice-sheet model coupled to a climate model.
In: Annals of glaciology. 27 (1998), S. 169-176, [Article]

Calov, R. ; Savvin, A. A. ; Greve, R. ; Hansen, ; Hutter, K. (1998):
Simulation of the Antarctic ice sheet with a threedimensional polythermal ice-sheet model, in support of the EPICA project.
In: Annals of glaciology. 27 (1998), S. 201-206, [Article]

Chen, B. ; Gross, (1997):
Interaction of two coplanar penny-shaped cracks with transient elastic waves.
In: Wave motion. 26 (1997), S. 69-83, [Article]

Chen, B. ; Gross, (1997):
Two parallel penny-shaped cracks under the action of dynamic impacts.
In: Archive of applied mechanics. 67 (1997), S. 555-565, [Article]

Chen, B. (1996):
Axisymmetric dynamic response of a penny-shaped crack to a pair of transient concentrated forces.
In: International journal of fracture. 81 (1996), S. 77-88, [Article]

D

Dadvand, Abdolrahman ; Bagheri, Milad ; Samkhaniani, Nima ; Marschall, Holger ; Wörner, Martin (2021):
Advected phase-field method for bounded solution of the Cahn–Hilliard Navier-Stokes equations.
In: Physics of Fluids, 33 (5), AIP, ISSN 1070-6631,
DOI: 10.1063/5.0048614,
[Article]

Dölz, J. ; Harbrecht, H. ; Kurz, S. ; Multerer, M. ; Schöps, S. ; Wolf, F. (2021):
Bembel: The fast isogeometric boundary element C++ library for Laplace, Helmholtz, and electric wave equation. (Publisher's Version)
In: SoftwareX, 11, Elsevier, ISSN 2352-7110,
DOI: 10.26083/tuprints-00019229,
[Article]

Ding, J. ; Schumacher, D. ; Jahn, D. ; Blažević, A. ; Roth, M. (2018):
Simulation studies on generation, handling and transport of laser-accelerated carbon ions.
In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 909, pp. 168-172. Elsevier, ISSN 0168-9002,
DOI: 10.1016/j.nima.2018.02.103,
[Article]

Dietl, Jochen ; Engelbart, Hendryk ; Sielaff, Axel (2015):
A Novel Type of Thermal Solar Water Disinfection Unit.
Darmstadt, Germany, [Report]

Dieringer, Rolf (2015):
Erweiterungen der Rand-Finite-Elemente-Methode zur Analyse von Platten und Laminaten mit besonderem Fokus auf der Ermittlung von Singularitätsordnungen an Rissen und Kerben.
In: Forschungsberichte des Instituts für Mechanik der Technischen Universität Darmstadt, Band 36, Darmstadt, Studienbereich Mechanik, Technische Universität Darmstadt, TU Darmstadt, ISBN 978-3-935868-36-5,
[Ph.D. Thesis]

Drefke, C. ; Stegner, J. ; Sass, I. (2014):
Veränderungen der thermischen Eigenschaften teilgesättigter Böden durch den Betrieb geothermischer Anlagen.
In: Schriftenreihe der Deutschen Gesellschaft für Geowissenschaften, In: GeoFrankfurt 2014 – Dynamik des Systems Erde / Earth Systems Dynamics, Abstract Volume, pp. 528-533, Stuttgart, Schweizerbart Science Publishers, ISBN 978-3510492343,
[Book Section]

Dyroff, Antje (2008):
Synthese donorfunktionalisierter Metallocen-Katalysatoren für die Anwendung in der Homo- und Copolymerisation von Ethen unter Hochdruckbedingungen.
Darmstadt: 1999. XIV, 135 S, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Dineva, P. ; Rangelov, T. ; Gross, Dietmar (2005):
BIEM for 2D steady-state problems in cracked anisotropic materials.
In: Engineering Analysis with Boundary Elements, 29 (7), pp. 689-698. ISSN 09557997,
[Article]

Demiray, S. ; Becker, Wilfried ; Hohe, J. (2005):
Strain-energy based homogenisation of two- and three-dimensional hyperelastic solid foams.
In: Journal of Material Science, 40, pp. 5839-5844. [Article]

Dineva, P. S. ; Gross, Dietmar ; Rangelov, T. V. (2005):
BIEM for cracked piezoelectric solids under dynamic load.
In: Proceedings / 10th Jubilee National Congress on Theoretical and Applied Mechanics : 13 - 16 September 2005, Varna / National Committee of Theoretical and Applied Mechanics, Institute of Mechanics, Bulgarian Academy of Sciences. Ed.: Ya. Ivanov .... - S. 1, [Conference or Workshop Item]

Demiray, S. ; Becker, Wilfried ; Hohe, J. (2005):
A triangular finite element for sandwich plates accounting for transverse core compressibility.
In: Sandwich structures 7: advancing with sandwich structures and materials ; proceedings of the 7th International Conference on Sandwich Structures, Aalborg University, Aalborg, Denmark, 29 - 31 August 2005 / ed. by O. T. Thomsen .... - Dordrecht : Springer,, Dordrecht, Springer, [Conference or Workshop Item]

Demiray, S. ; Ohrndorf, A. ; Becker, Wilfried ; Hohe, J. ; Krupp, U. ; Christ, H.-J. (2005):
Micromechanical modeling and experimental characterization of the deformation behaviour of open-cell metal foams.
In: Cellular metals and polymers : CMaP ; proceedings of the Symposium on Cellular Metals and Polymers, sponsored by the Deutsche Forschungsgemeinschaft (DFG), held October 12 - 14, 2004, in Fürth, Germany, including reports from the DFG priority program, Ce, Uetikon-Zürich [u.a.], Trans Tech Publ., [Conference or Workshop Item]

Demiray, S. ; Becker, Wilfried ; Hohe, J. (2004):
A triangular v. Karman type finite element for sandwich plates with transversely compressible core.
In: Computer Methods in Applied Mechanics and Engineering, 193, pp. 2239-2260. [Article]

Demiray, S. ; Becker, Wilfried (2004):
Comparison of hyperelastic 2-D and 3-D model foams at large deformations.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, pp. 246-247, [Conference or Workshop Item]

Dafalias, Y. F. ; Schick, David ; Tsakmakis, Charalampos (2003):
A simple model for describing yield surface ecolution during plastic flow.
In: Deformation and failure in metallic materials / Kolumban Hutter ... (Eds.) .- Berlin [u.a.] : Springer, 2003.- (Lecture Notes in Applied and Computational Mechanics ; 10), S. 169-201, Springer, [Article]

Dineva, P. ; Rangelov, T. ; Gross, Dietmar (2002):
Dynamic behavior of a bi-material interface cracked plate.
In: Engineering fracture mechanics, 99, pp. 1193-1218. [Article]

Dineva, P. ; Rangelov, T. ; Gross, Dietmar (2002):
Dynamic behavior of a cracked solder joint.
In: Journal of sound and vibration, 256, pp. 81-102. [Article]

Dell'Isola, Francesco ; Guarascio, M. ; Hutter, K. (2000):
A variational approach for the deformation of a saturated porous solid. A second-gradient theory extending Terzaghi's effective stress principle.
In: Archive of Applied Mechanics, 70 (5), pp. 323-337. Springer Nature, ISSN 0939-1533,
DOI: 10.1007/s004199900020,
[Article]

Dankert, Michael (1999):
Ermüdungsrißwachstum in Kerben: ein einheitliches Konzept zu Berechnung von Anriß- und Rißfortschrittslebensdauern.
60, Darmstadt: Inst. für Stahlbau u. Werkstoffmechanik, 1999. XIII, 214 S, Darmstadt, Inst. für Stahlbau u. Werkstoffmechanik, TU Darmstadt,
[Ph.D. Thesis]

Dineva, P. ; Gross, D. ; Rangelov, T. (1999):
Ultrasonic wave scattering by a line crack in a solder joint.
In: Research in nondestructive evaluation, 11, pp. 117-135. [Article]

Denz, Cornelia ; Jensen, S. Juul ; Schwab, M. ; Tschudi, Theo (1999):
Stabilization, manipulation and control of transverse optical patterns in a photorefractive feedback system.
In: Journal of optics. B: Quantum and semiclassical,optics, 1, pp. 114-120. [Article]

Dineva, P. ; Gross, D. ; Rangelov, T. (1999):
Evaluation of scattered wave and stress concentration field in a damage solder joint.
In: Journal of sound and vibration, 223, pp. 213-230. [Article]

Dell'Isola, Francesco ; Hutter, K. (1999):
Variations of porosity in a sheared pressurized layer of saturated soil induced by vertical drainage of water.
In: Proceedings of the Royal Society London, A 455, pp. 2841-2860, [Conference or Workshop Item]

Dell'Isola, Francesco ; Hutter, K. (1999):
A free moving boundary problem for the till below large ice sheets.
In: Free boundary problems: theory and applications. Hrsg.: I. Athanasopoulos, G. Makrakis, J.F. Rodrigues. Boca Raton, Fla.: Chapman and Hatt/CRC, 1999. S. 204-209, [Book Section]

Dell'Isola, Francesco ; Hutter, K. (1998):
What are the dominant thermomechanical processes in the basal sediment layer of large ice sheets?
In: Proceedings of the Royal Society London. A 454 (1998), S. 1169-1195, [Conference or Workshop Item]

Dell'Isola, Francesco ; Hutter, K. (1997):
Continuum mechanical modelling of the dissipative processes in the sediment-water layer below glaciers.
In: Comptes rendus de l'Académie des Sciences, Paris. Ser. IIb. 325 (1997), S. 449-456, [Article]

Diebels, Stefan (1995):
Numerical study of barotropic and baroclinic behavior of a nonlinear two-layer model.
In: Journal of computational physics. 117 (1995), S. 114-120, [Article]

E

Ebert, Tina ; Heber, René ; Abel, Torsten ; Bieker, Johannes ; Schaumann, Gabriel ; Roth, Markus (2021):
Targets with cone-shaped microstructures from various materials for enhanced high-intensity laser–matter interaction.
In: High Power Laser Science and Engineering, 9, Cambridge University Press, ISSN 2095-4719,
DOI: 10.1017/hpl.2021.10,
[Article]

Ebert, Tina ; Neumann, Nico W. ; Döhl, Leonard N. K. ; Jarrett, Jonathan ; Baird, Christopher ; Heathcote, Robert ; Hesse, Markus ; Hughes, Aasia ; McKenna, Paul ; Neely, David ; Rusby, Dean ; Schaumann, Gabriel ; Spindloe, Christopher ; Tebartz, Alexandra ; Woolsey, Nigel ; Roth, Markus (2020):
Enhanced brightness of a laser-driven x-ray and particle source by microstructured surfaces of silicon targets.
In: Physics of Plasmas, 27 (4), AIP Publishing, ISSN 1070-664X,
DOI: 10.1063/1.5125775,
[Article]

Elbert, R. ; Seikowsky, L. ; Müller, J. P. ; Poschmann, P. (2016):
Wege zum Kombinierten Verkehr. Eine Analyse potenzieller Transportrelationen und Angebote von, nach und innerhalb Deutschlands.
In: Internationales Verkehrswesen, 68 (2), pp. 34-39. DVV Media Group, ISSN 0020-9511,
[Article]

Eidel, Bernhard (2007):
Squaring the circle -- a curious phenomenon of fcc single crystals in spherical microindentation.
In: Computational Materials Science, 39, pp. 172Þ178. ISSN 0927-0256,
[Article]

Eidel, Bernhard ; Stukowski, Alexander (2007):
Dislocation nucleation and defect structure during nanoindentation.
In: Proceedings of the IX International Conference on Computational Plasticity <Barcelona,2007> ; computational plasticity - fundamentals and applications COMPLAS IX ; 425-428 ; ISBN: 978-84-96736-27-6, pp. 425-428, [Conference or Workshop Item]

Eidel, Bernhard ; Stukowski, Alexander (2006):
Atomistic to continuum scale transition for crystalline materials - a comparative study of quasicontinuum approaches.
In: Third International Conference for Multiscale Materials Modeling <Freiburg,2006> ; Proceedings of the Third International Conference for Multiscale Materials Modeling ; 167-169 ; ISBN: 978-3-8167-7206-4, pp. 167-169, [Conference or Workshop Item]

Eckert, Steffen ; Gross, Dietmar (2005):
Simulation of macroscopic material behaviour for uniaxiable fiber-matrix composites,using a DAE-approach.
In: Computational Material Science, 32, pp. 348-354. [Article]

Eckert, Steffen (2005):
Orts- und zeitadaptive DAE-Methode zur Beschreibung elastisch-plastischen Materialverhaltens innerhalb der FEM.
8, Darmstadt, TU, Inst. für Mechanik, TU Darmstadt, ISBN 3-935868-09-X,
[Ph.D. Thesis]

Engels, Heiko ; Hebel, Jochen ; Becker, Wilfried (2004):
On the way to get optimized patch repairs of laminates.
In: Proceedings of the eighth Pan American Congress of Applied Mechanics PACAMVIII <8. 2004, LaHabana, Cuba>. - Hrsg.: J.Bravo Castiller ... (Applied mechanics in the Americas ; 10), S. 13-16, Hrsg., J.Bravo Castiller ... (Applied mechanics in the Americas ; 10), [Conference or Workshop Item]

Eckert, Steffen ; Gross, Dietmar (2004):
A unified approach for elasto-plastic FEM simulation, incorporating adaptive spatial and time discretization.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, pp. 308-309, [Conference or Workshop Item]

Eckert, Steffen ; Baaser, Herbert ; Gross, Dietmar ; Scherf, O. (2004):
A BDF2 integration method with step size control for elasto-plasticity.
In: Computational Mechanics, 34, pp. 377-386. [Article]

Elmali, Ayhan ; Dincer, Ilker ; Elerman, Yalcin ; Ehrenberg, Helmut ; Fuess, Hartmut (2004):
Magnetic ordering of the Pr sublattice with the substitution of Cu for Mn in PrMn2Si2 intermetallics.
In: Journal of physics / Condensed matter, 16, pp. 8669-8674. [Article]

Ehehalt, U. ; Hochlenert, Daniel ; Markert, Richard (2004):
An analytical Description of Backward Whirl caused by Rotor-Stator-Contact.
In: Proceedings of ISROMAC-10, Honolulu, (2004), Paper No. 152 on CD, S. 1-8. [Elekt. Ressource], [Conference or Workshop Item]

Ehrentraut, Harald ; Chrzanowska, Agnieszka (2003):
Induced anisotropy in rapid flows of nonspherical granular materials.
In: Dynamic response of granular and porous materials under large and catastrophic deformations. Eds.: Kolumban Hutter and Nina Kirchner. Lecture notes in applied and computational mechanics ; 11. - Berlin [u.a.]: Springer, 2003. S. 343-364, Berlin [u.a.], Springer, [Book Section]

Eckart, Winfried ; Gray, J. M. N. T. ; Hutter, Kolumban (2003):
Particle image velocimetry (PIV) for granular avalanches on inclined planes.
In: Dynamic Response of Granular and Porous Materials under Large and Catastrophic Deformations (Eds. K. Hutter and N. P. Kirchner). - Berlin, Springer, 2003, S. 195-218, [Article]

Ehrentraut, Harald ; Chrzanowska, Agnieszka (2003):
Induced anisotropy in parid flows of nonspherical granular materials.
In: Dynamic Response of Granular and Porous Materials under Large and Catastrophic Deformations (Eds. K. Hutter and N. P. Kirchner). - Berlin, Springer, 2003, S. 343-364., [Article]

Ehehalt, U. ; Markert, Richard (2003):
Instability of unbalance excited synchronous forward whirl at rotor-stator-contact.
In: ZAMM, pp. 60-61. [Article]

Eckert, Steffen ; Gross, Dietmar ; Baaser, Herbert (2003):
A DAE-Approach applied to elastic-plastic material behavior using FEM.
In: PAMM(Poceedings in applied mathematics and mechanics, 3, pp. 270-271. [Article]

Engels, H. ; Becker, Wilfried (2003):
Analysis and optimisation of patch repairs of laminates.
In: Composites of constructions : proceedings of the international conference composites in constructions <2003, Sept.16-19, Cosenza, Italy>. - Ed.: D. Bruno; G. Spadea, R.N. Swamy.- S.57-62, Ed., D. Bruno; G. Spadea, [Conference or Workshop Item]

Engels, H. ; Becker, Wilfried (2003):
Repair of laminates by external patches : analysis and optimisation.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 3, pp. 166-1167, [Conference or Workshop Item]

Emmel, Thomas ; Stiefel, Ulrich ; Gross, Dietmar ; Rödel, Jürgen (2003):
Damage and failure of ceramic metal composites : experimental and numerical investigations.
pp. 203-221, Berlin [u.a.], Springer, [Book Section]

Emmel, Thomas (2002):
Theoretische und numerische Untersuchung von Versagensmechanismen in Metall-Keramik-Verbundstoffen.
4, Darmstadt, Techn. Univ., Inst. für Mechanik, TU Darmstadt,
[Ph.D. Thesis]

Ehrentraut, Harald (2002):
Kontinuumsmechanik anisotroper Festkörper und Fluide.
6, Darmstadt, Technische Universität, Inst. für Mechanik, ISBN 3-935868-06-5,
[Habilitation]

Ehehalt, Ulrich ; Markert, Richard ; Wegener, Georg (2002):
Stability of synchronous forward whirl at rotor-stator-contact.
In: Proceedings of the international symposium on transport phenomena and dynamics of rotating machinery <9, 2002, Honolulu, Hawai> (ISROMAC-9). - Osaka, 2002, Paper No.:DD-ABS-045 on CD, S. 1-8, [Conference or Workshop Item]

Eckart, Winfried ; Sadiki, A. (2001):
Polar theory for electrorheological fluids based on extended thermodynamics.
In: International journal of applied mechanics and engineering, 6, pp. 969-998. [Article]

Ehrentraut, Harald (2001):
Anisotropic fluids: from liquid crystals to granular materials.
In: Continuum mechanics and applications in geophysics and the environment. Hrsg.: B. Straughan, R. Greve, H. Ehrentraut, Y. Wang. - Berlin (u.a.): Springer, 2001. S. 18-43, Berlin (u.a.), Springer, [Book Section]

Eckert, Steffen ; Gross, Dietmar (2001):
3D periodic arrangements of misfitting precipitates in anisotropic materials.
In: Zeitschrift für angewandte Mathematik und Mechanik, 81, pp. S2, S283-S284. [Article]

Eckart, Winfried (2000):
Phenomenological modeling of electrorheological fluids with an extended CASSON-model.
In: Continuum mechanics and thermodynamics, 12, pp. 341-362. [Article]

Elmali, Ayhan ; Elerman, Y. ; Svoboda, I. ; Fuess, H. (2000):
Structure and super-exchange interaction in a dinuclear iron(III) complex.
In: Journal of molecular structure, 516 (1), pp. 43-47. Elsevier, ISSN 0022-2860, e-ISSN 1872-8014,
DOI: 10.1016/S0022-2860(99)00135-0,
[Article]

Ergüven, M. E. ; Gross, D. (1999):
On the penny-shaped crack in inhomogeneous materials under normal extension.
In: International journal of solids and structures, 36, pp. 1869-1882. [Article]

Eberlein, Robert (1997):
Finite-Elemente-Konzepte für Schalen mit großen elastischen und plastischen Verzerrungen.
Darmstadt: 1997. 190 S, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Engelke, Markus (1997):
Qualität logistischer Dienstleistungen.
11, Berlin: E. Schmidt, 1997. XVII, 311 S., Berlin, E. Schmidt, TU Darmstadt,
[Ph.D. Thesis]

El-Mossallamy, Yasser (1996):
Ein Berechnungsmodell zum Tragverhalten der Kombinierten Pfahl-Plattengründung.
H.36, Darmstadt: Techn. Hochschule, Inst. u. Versuchsanstalt für Geotechnik, 1996. XIV, 183 S., Darmstadt, Techn. Hochschule, TU Darmstadt,
[Ph.D. Thesis]

Ehrlich, Volker (1996):
Arbeitslosigkeit und zweiter Arbeitsmarkt: theoretische Grundlagen, Probleme u. Erfahrungen.
14, Frankfurt a.M. (u.a.): Lang, 1996. XIV,395 S., Frankfurt a.M. (u.a.), Lang, TU Darmstadt,
[Ph.D. Thesis]

F

Felscher, Patrick (2016):
Rückwirkung des Gleitlagermoments auf die Drehbewegung des Rotors.
In: Forschungsberichte des Instituts für Mechanik der Technischen Universität Darmstadt, 41, Darmstadt, Studienbereich Mechanik, Technische Universität Darmstadt, Technische Universität, ISBN 978-3-935868-41-9,
[Ph.D. Thesis]

Franzbach, Daniel (2014):
Field Induced Phase Transitions in Ferroelectric Materials.
Darmstadt, tuprints, TU Darmstadt,
[Ph.D. Thesis]

Fuchs, Tobias Christian (2013):
Nephrotoxicity biomarkers in vivo and in vitro: Identification and validation of biomarkers for the detection of substance-induced acute and sub-acute renal damage.
TU Darmstadt,
[Ph.D. Thesis]

Frölich, Stefanie (2013):
Die Rolle des Prostaglandin-Signalweges im Rahmen der Nephrogenese bei der Maus.
Frankfurt, TU Darmstadt,
[Ph.D. Thesis]

Fröbel, Toni ; Stein, Peter (2011):
Die Kopplungen von Ingenieuranwendungen aus Sicht der Informatik.
In: Bautechnik, 88 (Sondernummer 6), pp. 65-69. Ernst & Sohn Verlag, ISSN 0932-8351,
[Article]

Farwig, Reinhard ; Galdi, Giovanni P. ; Sohr, Hermann (2006):
A new class of weak solutions of the Navier-Stokes equations with nonhomogeneous data.
In: Journal of Mathematical Fluid Mechanics, 8, pp. 423-444. [Article]

Fügenschuh, Armin ; Homfeld, Henning ; Huck, Andreas ; Martin, Alexander (2006):
Locomotive and wagon scheduling in freight transport.
In: Proceedings of the ATMOS06, [Conference or Workshop Item]

Fang, Chung (2005):
A thermo-mechanical continuum theory with internal length of cohesionless granular materials [Elektronische Ressource.
11, Darmstadt, Inst. f. Mechanik, TU Darmstadt, ISBN 3-935868-11-1,
[Ph.D. Thesis]

Filatov, S. K. ; Bendeliani, N. A. ; Albert, Barbara ; Kopf, J. ; Dyuzeva, T. I. ; Lityagina, L. M. (2005):
High-pressure synthesis of alpha-PbO2 and its crystal structure at 293, 203, and 113 K from single crystal diffraction data.
In: Solid State Sciences, 7, pp. 1363-1368. [Article]

Fügenschuh, Armin ; Herty, M. ; Klar, A. ; Martin, Alexander (2004):
Combinatorial and Continuous Models for the Optimization of Traffic Flows on Networks.
2350, Darmstadt, Ohne Verlag / Selbstverlag, [Book]

Faria Santos, Sérgio Henrique (2003):
Mechanics and Thermodynamics of Mixtures with Continuous Diversity.
Darmstadt, Technische Universität, TU Darmstadt,
[Ph.D. Thesis]

Faria, Sérgio H. ; Kremer, Gilberto M. ; Hutter, Kolumban (2003):
On the inclusion of recrystallization processes in the modeling of induced anisotropy in ice sheets : a thermodynamicist's point of view.
In: Annals of glaciology, 37, pp. 29-34. [Article]

Forsström, Pirjo-Leena ; Sallasmaa, Olli ; Greve, Ralf ; Zwinger, Thomas (2003):
Simulation of fast-flow features of the Fennoscandian ice sheet during the last glacial maximum.
In: Annals of glaciology, 37, pp. 383-389. [Article]

Fessner, Wolf-Dieter (2003):
Are Paradigms Changing in Favor of Biocatalysis?
In: Advanced synthesis & catalysis, pp. 649-650. [Article]

Feng, X. Q. ; Gross, D. (2000):
An approximate scheme for considering effects of microcrack interaction on overall constitutive relation of brittle solids under complex loading.
In: Mechanica acta, 139, pp. 143-159. [Article]

Feng, X. Q. ; Gross, D. (2000):
Three-dimensional micromechanical model for quasi-brittle solids with residual strains under tension.
In: International journal of damage mechanics, 9, pp. 70-110. [Article]

Fafara, A. ; Marzec, M. ; Haase, W. ; Wrobel, S. ; Kilian, D. ; Godlewska, M. ; Czuprynski, K. ; Dabrowski, R. (2000):
Antiferroelectric liquid crystals studied by different methods.
In: Ferroelectrics, 245 (1), pp. 81-89. [Article]

Feng, X. Q. ; Gross, D. (1999):
A global/local shake-down analysis method of cracked elasto-plastic structures.
In: Engineering fracture mechanics, 63, pp. 179-192. [Article]

Franke, Ulrich ; Hutter, K. ; Jöhnk, K. (1999):
A physical-biological coupled model for algal dynamics in lakes.
In: Bulletin of mathematical biology. 61 (1999), S. 239-272, [Article]

Feng, X. Q. ; Gross, D. (1999):
Micromechanical analysis of microcrack-induced residual strains in quasi-brittle solids.
In: Computational materials science, 16, pp. 362-371. [Article]

Feucht, Markus (1998):
Ein gradientenabhängiges Gursonmodell zur Beschreibung duktiler Schädigung mit Entfestigung.
Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Feucht, Markus ; Gross, (1998):
On a gradient dependent Gurson model for ductile, strain-softening damage.
In: ICES 98: Proceedings. Hrsg. S.N. Atluri (u.a.) Vol. 2: Modeling and simulation based engineering. S. 1249-1254, Palmdale, USA: Tech Science Press, 1998, Palmdale, USA, Tech Science Press, [Conference or Workshop Item]

Feucht, Markus ; Gross, D. (1997):
Numerical analysis of a nonlocal damage model for ductile crack growth.
In: Advances in fracture research. Vol. 4. Hrsg.: B.L. Karihaloo (u.a.) - New York: Pergamon Press, 1997. S. 1999-2006, New York, Pergamon Press, [Book Section]

Feucht, Markus ; Gross, D. ; Wriggers, P. (1997):
A new element formulation for nonlocal damage models.
In: Computational plasticity: fundamentals and applications. Hrsg.: D.R.J. Owen (u.a.) S. 1083-1088, Barcelona: CIMNE, 1997, Barcelona, CIMNE, [Book Section]

Fellmeth, Stefan P. (1997):
Die Vertretung verselbständigter Rechtsträger in europäischen Ländern, Teil I: Deutschland, Italien und Spanien.
105, Berlin: Duncker & Humblot, 1997. 481 S., Berlin, Duncker & Humblot, TU Darmstadt,
[Ph.D. Thesis]

Feucht, Markus (1996):
Numerical modelling of crack growth in ductile damaging materials.
In: Mechanisms and mechanics of damage and failure: Proc. of the 11th European Conference on Fracture, Poitiers, Sept. 1996. Vol. 2. Hrsg.: J. Petit. S. 923-928, Warley: European Microbeam Analysis Society, 1996, Warley, European Microbeam Analysis Society, [Conference or Workshop Item]

Fischer, Thomas (1994):
Intermediäre Phasen des Dreistoffsystems Al2O3-SO3-H2O.
Darmstadt: 1995. 245 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

G

Grosse-Puppendahl, Tobias (2015):
Capacitive Sensing and Communication for Ubiquitous Interaction and Environmental Perception.
TU Darmstadt,
[Ph.D. Thesis]

Grimmer, Martin (2015):
Powered Lower Limb Prostheses.
Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Gupta, Anant (2014):
Entwicklung eines Systems zur Ganzkörperregelung eines kraftgeregelten Humanoidroboters.
Technische Universitaet Darmstadt,, Studienbereich Informationssystemtechnik, [Master Thesis]

Groche, Peter ; Christiany, Matthias ; Brüninghaus, Gerhard (2013):
Servopressen sind wegen ihrer Emissionswerte auch "salonfähig".
In: MaschinenMarkt: MM, (32/33), pp. 26-28. Vogel Verlag, Würzburg, [Article]

Groche, Peter ; Steitz, Manuel ; Engels, Michael ; Scheil, Jan ; Müller, Clemens ; Bräuer, Günter ; Weigel, Kai (2013):
Effizienzsteigerung im Werkzeug- und Formenbau durch maschinelle Oberflächeneinglättung.
In: EFB-Forschungsbericht, 358, Hannover, Europäische Forschungsgesellschaft für Blechverarbeitung e.V., ISBN 978-3-86776-398-1,
[Book]

Görtan, Okan ; Livatyali, Haydar ; Groche, Peter
Altan, Taylan ; Tekkaya, A. Erman (eds.) (2012):
Sheet Metal Forming-Processes and Applications.
In: Sheet Metal Forming-Processes and Applications, pp. 211-225, ASM International, ISBN 978-1615038442,
[Book Section]

Gao, Yang ; Xu, Bai-Xiang (2010):
The refined theory for a magnetoelastic body – II. Plane problems.
In: International Journal of Applied Electromagnetics and Mechanics, 32 (1), pp. 31-46. [Article]

Gao, Y. ; Zhao, B. S. ; Xu, Bai-Xiang (2008):
The decomposed form and boundary conditions of elastic beams with free faces.
In: Acta Mechanica, 196 (3-4), pp. 193-203. Springer, ISSN 0001-5970,
[Article]

Göpfert, Tomas (2008):
Zum Trag- und Verformungsverhalten thermisch getrennter Stirnplattenstöße.
83, Darmstadt, Inst. für Stahlbau und Werkstoffmechanik, TU Darmstadt, ISBN 978-3-939195-09-2,
[Ph.D. Thesis]

Gao, Yang ; Xu, Bai-Xiang ; Zhao, Bao-Sheng ; Chang, Tian-Chun (2008):
New general solutions of plane elasticity of one-dimensional quasicrystals.
In: physica status solidi (b), 245 (1), pp. 20-27. ISSN 03701972,
[Article]

Gao, Yang ; Xu, Bai-Xiang (2008):
The remarkable nature of one-dimensional quasicrystal.
In: Zeitschrift für Kristallographie, 223 (11-12), pp. 809-812. OLDENBOURG VERLAG, LEKTORAT MINT, POSTFACH 80 13 60, D-81613 MUNICH, GERMANY, ISSN 0044-2968,
[Article]

Gao, Yang ; Xu, Bai-Xiang (2008):
Method on holomorphic vector functions and applications in two-dimensional quasicrystals.
In: International Journal of Modern Physics B, 22 (6), pp. 635-643. [Article]

Gao, Yang ; Xu, Bai-Xiang ; Zhao, Bao-Sheng
Virtanen, Eetu N. (ed.) (2008):
The exact theories of rectangular beams based on linear elasticity.
In: Applied Mathematical Modeling, Nova Science Publishers, [Book Section]

Gao, Yang ; Xu, Bai-Xiang ; Zhao, Bao-Sheng (2007):
The decomposed form of magnetoelastic beams with free faces.
In: Acta Mechanica, 192 (1-4), pp. 235-242. Springer, ISSN 0001-5970,
[Article]

Gao, Yang ; Xu, Bai-Xiang ; Zhao, Bao-Sheng (2007):
The refined theory of beams for a transversely isotropic body.
In: Acta Mechanica, 191 (1-2), pp. 109-122. Springer, ISSN 0001-5970,
[Article]

Griffiths, B. S. ; Christensen, S. ; Bonkowski, M. (2007):
MIcrofaunal interactions in the Rhizosphere . how nematodes and protozoa link above- and belowground processes.
In: The rhizosphere : an ecological perspective / ed. by Zoe Cardon and Julie Whitbeck. - Amsterdam [u.a.] : Elsevier/Academic Press, 2007, S. 57-71. ISBN: 0-12-088775-4, Amsterdam [u.a.], Elsevier/Academic Press, [Book Section]

Gurevych, Iryna ; Porzel, R. ; Malaka, R. (2006):
Modeling domain knowledge : know-how and know-what.
In: SmartKom : foundations of multimodal dialogue systems; with 63 tables / Wolfgang Wahlster (Ed.). - Berlin ; Heidelberg [u.a.] : Springer, 2006, S. 71-84 ISBN: 3-540-23732-1, pp. 71-84, Berlin ; Heidelberg [u.a.], Springer Verlag, ISBN 3-540-23732-1,
[Book Section]

Götz, Annette E. (2006):
Application of palynofacies analysis to high-resolution sequence stratigraphy of Mesozoic carbonate systgems.
[Habilitation]

Geyer, Dirk (2005):
1D-Raman, Rayleigh experiments in a turbulent opposed-jet.
Nr.533, Düsseldorf, VDI-Verl., TU Darmstadt, ISBN 3-18-353306-5,
[Ph.D. Thesis]

Gross, Dietmar ; Ehlers, W. ; Wriggers, P. (2005):
Formeln und Aufgaben zur technischen Mechanik : Band 1 : Statik.
Berlin, Springer, ISBN 3-540-22205-7,
[Book]

Gutschmidt, Stefanie (2005):
Mathematical mechanical modeling of wobbling disk piezoelectric motors.
Herdecke, GCA-Verl., TU Darmstadt, ISBN 3-89863-191-5,
[Ph.D. Thesis]

Gross, Dietmar ; Ehlers, W. ; Wriggers, P. (2005):
Formeln und Aufgaben zur technischen Mechanik : Band 2 : Elastostatik, Hydrostatik.
Berlin, Springer, ISBN 3-540-22960-4,
[Book]

Greve, Ralf ; Mahajan, R. A. ; Segschneider, J. ; Grieger, B. (2004):
Evolution of the north-polar cap of Mars : a modelling study.
In: Planetary and Space Science, 52, pp. 775-787. [Article]

Gross, Dietmar ; Hauger, W. ; Schnell, W. ; Schröder, J. (2004):
Technische Mechanik : Band 1 : Statik.
Berlin, Springer, ISBN 3-540-22166-2,
[Book]

Gross, Dietmar ; Hauger, W. ; Schnell, W. ; Schröder, J. (2004):
Technische Mechanik : Band 3 : Kinetik.
Berlin, Springer, ISBN 3-540-22167-0,
[Book]

Gross, Dietmar ; Hauger, W. ; Schnell, W. ; Wriggers, P. (2004):
Technische Mechanik : Band 4 : Hydromechanik, Elemente der Höheren Mechanik, numerische Methoden.
Berlin, Springer, ISBN 3-540-22099-2,
[Book]

Gross, Dietmar ; Dineva, P. ; Rangelov, T. (2004):
BIEM for cracked piezoelectric solids under dynamic load.
In: Computational mechanics : proceedings of the Sixth World Congress on Computational Mechanics [WCCM] in conjunction with the Second Asian-Pacific Congress on Computational Mechanics [APCOM] ; September 5 - 10, 2004, Beijing, China / Eds. Z. H. Yao .... - B, Beijing, Tsinghua Univ. Press [u.a.], [Conference or Workshop Item]

Goswami, S. ; Mueller, A. ; Hohe, J. ; Becker, Wilfried (2004):
On the determination of crack initiation directions under mixed mode loading.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, pp. 280-281, [Conference or Workshop Item]

Gross, Dietmar ; Kolling, Stefan ; Müller, Ralf ; Schmidt, Ingo (2003):
Configurational forces and their application in solid mechanics.
In: European Journal of mechanics A : Solids, 22 (5), pp. 669-692. ISSN 0997-7538,
DOI: 10.1016/S0997-7538(03)00076-7,
[Article]

Grammenoudis, Paschalis (2003):
Mikropolare Plastizität.
Darmstadt, Technische Universität, TU Darmstadt,
[Ph.D. Thesis]

Grammenoudis, Paschalis (2003):
Mikropolare Plastizität.
Darmstadt, Techn. Univ., TU Darmstadt,
[Ph.D. Thesis]

Greve, Ralf (2003):
Kontinuumsmechanik : ein Grundkurs für Ingenieure und Physiker ; mit 48 Aufgaben und mit Lösungen.
Berlin [u.a.], Springer, ISBN 3-540-00760-1,
[Book]

Greve, Ralf (2003):
Inlandeismodelle.
In: Promet, 29, pp. 98-104. [Article]

Greve, Ralf ; Klemann, Volker ; Wolf, Detlef (2003):
Ice flow and isostasy of the north polar cap of Mars.
In: Planetary and space science, 51, pp. 193-204. [Article]

Gross, Dietmar ; Ehlers, Wolfgang ; Wriggers, Peter (2003):
Statik (Formeln und Aufgaben zur technischen Mechanik : T. 1.
Berlin [u.a.], Springer, ISBN 3-540-43849-1,
[Book]

Gross, Dietmar ; Wriggers, Peter ; Ehlers, Wolfgang (2003):
Elastostatik, Hydrostatik (Formeln und Aufgaben zur technischen Mechanik : Teil 2.
Berlin [u.a.], Springer, ISBN 3-540-00379-7,
[Book]

Gross, Dietmar ; Mueller, Ralf ; Kolling, Stefan (2002):
Configurational forces : morphology evolution and finite elements.
In: Mechanics research communications, 29 (6), pp. 529-536. [Article]

Gu, B. ; Wang, X. Y. ; Yu, S. W. ; Gross, Dietmar (2002):
Transient response of a Griffith crack between dissimilar piozoelectric layers under anti-plane mechanical and in-plane electrical impacts.
In: Engineering fracture mechanics, 69, pp. 565-576. [Article]

Greve, Ralf ; Wang, Yongqi ; Mügge, Bernd (2002):
Comparison of numerical schemes for the solution of the advective age equation in ice sheets.
In: Annals of Glaciology, 35 (1), pp. 487-494. International Glacial Society, ISSN 0260-3055,
DOI: 10.3189/172756402781817112,
[Article]

Gross, Dietmar (2001):
Angewandte Mechanik - ein Rostocker Kind?
In: Schiffbauforschung, 40, pp. 59-61. [Article]

Gross, Dietmar ; Exner, H. E. (2001):
Numerische Simulation materialwissenschaftlicher Phänomene.
In: Thema Forschung, pp. S. 64-70. [Article]

Gross, Dietmar ; Seelig, T. (2001):
Bruchmechanik - mit einer Einführung in die Mikromechanik.
Berlin (u.a.), Springer, [Book]

Gray, J. M. N. T. (2001):
Granular flow in partially filled slowly rotating drums.
In: Journal of fluid mechanics, 441, pp. 1-29. ISSN 0022-1120, e-ISSN 1469-7645,
DOI: 10.1017/S0022112001004736,
[Article]

Greve, Ralf (2001):
Glacial isostasy: Models for the response of the earth to varying ice loads.
In: Continuum mechanics and applications in geophysics and the environment. Hrsg.: B. Straughan, R. Greve, H. Ehrentraut, Y. Wang. - Berlin (u.a.): Springer, 2001. S. 307-325, Berlin (u.a.), Springer, [Book Section]

Gross, Dietmar (2001):
Morphological equilibrium and kinetics of two-phase materials.
In: Configurational mechanics of materials. Hrsg.: R. Kienzler u. G.A. Maugin. - Wien (u.a.): Springer, 2001 = International Centre for Mechanical Sciences - courses and lectures; No. 427. S. 221-272, Wien (u.a.), Springer, [Book Section]

Gross, Dietmar (2001):
Sliding crack model.
In: The handbook of materials behavior models. Hrsg.: J. Lemaitre. - San Diego: Acad. Press, 2001. S. 577-581, San Diego, Acad. Press, [Book Section]

Grammenoudis, Paschalis ; Tsakmakis, Ch. (2001):
Hardening rules for finite deformation micropolar plasticity: Restrictions imposed by the second law of thermodynamics and the postulate of Il'iushin.
In: Continuum mechanics and thermodynamics, 13, pp. 325-363. [Article]

Greve, Ralf (2000):
Waxing and waning of the perennial North Polar H2O ice cap of Mars over obliquity cycles.
In: Icarus, 144, pp. 419-431. [Article]

Greve, Ralf (2000):
On the response of the greenland ice sheet to greenhouse climate change.
In: Climatic change, 46, pp. 289-303. [Article]

Greve, Ralf (2000):
Large scale glaciation on Earth and on Mars.
Darmstadt, Techn. Univ., [Habilitation]

Gross, Dietmar ; Hauger, W. ; Schnell, W. ; Wriggers, P. (2000):
Technische Mechanik. 4: Hydromechanik, Elemente der höheren Mechanik, numerische Methoden.
Berlin, Heidelberg (u.a.), Springer, [Book]

Gödert, Günter ; Hutter, K. (2000):
Material update procedure for planar transient flow of ice with evolving anisotropy.
In: Annals of Glaciology, 30, pp. 107-114. Cambridge University Press, ISSN 0260-3055,
DOI: 10.3189/172756400781820552,
[Article]

Gray, John Mark Nicholas Timm (1999):
Granular flow in partially filled slowly rotating drums.
Darmstadt: 1999. II, 56 Bl, Darmstadt, Techn. Univ., [Habilitation]

Gray, J. M. N. T. ; Irmer, A. ; Tai, Y.-C. ; Hutter, K. (1999):
Plane and oblique shocks in shallow granular flows.
In: International Symposium on Shock Waves <22, 1999, London>: Proceedings, [Conference or Workshop Item]

Gray, J. M. N. T. ; Wieland, M. ; Hutter, K. (1999):
Gravity-driven free surface flow of granular avalanches over complex basal topography.
In: Proceedings of the Royal Society London, A 455, pp. 1841-1874, [Conference or Workshop Item]

Greve, Ralf ; Wyrwoll, K.-H. ; Eisenhauer, A. (1999):
Deglaciation of the Northern Hemisphere at the onset of the Eemian and Holocene.
In: Annals of glaciology, 28, pp. 1-8. [Article]

Gross, Dietmar (1999):
Recent results in the dynamics of stationary and running cracks.
In: Modeling of damage and fracture processes in engineering materials. Hrsg.: M. Basista, W.K. Nowacki. Warsaw: Polish Acad. of Sciences, IPPT, 1999. S. 1-56, [Book Section]

Greve, Ralf ; Mügge, B. ; Baral, D. R. ; Albrecht, O. ; Savvin, A. A. (1999):
Nested high-resolution modelling of the Greenland Summit region.
In: Advances in cold-region thermal engineering and sciences. Hrsg.: K. Hutter, Y. Wang, H. Beer. - Berlin, Heidelberg (u.a.): Springer, 1999. S. 285-306 (Lecture notes in physics; 533), Berlin, Heidelberg (u.a.), Springer, [Book Section]

Germann, Uta (1998):
Die Entschädigungsverhandlungen Hessen-Darmstadts in den Jahren 1798-1815: Diplomatie im Zeichen des revolutionären Umbruchs.
116, Darmstadt, Marburg: Hessische Historische Komm., 1998. 421 S, Darmstadt, Marburg, Hessische Historische Komm, TU Darmstadt,
[Ph.D. Thesis]

Gross, Dietmar ; Schnell, W. ; Ehlers, ; Wriggers, P. (1998):
Formeln und Aufgaben zur Technischen Mechanik. 2: Elastostatik. 5. Aufl.
Berlin, Heidelberg (u.a.): Springer, 1998, Berlin, Heidelberg (u.a.), Springer, [Book]

Greve, Ralf ; Weis, ; Hutter, K. (1998):
Palaeoclimatic evolution and present conditions of the Greenland Ice Sheet in the vicinity of Summit: an approach by large-scale modelling.
In: Paleoclimates. 2 (1998), 2-3, S. 133-161, [Article]

Güting, Peter-Matthias (1998):
Dreidimensionale Berechnung windgetriebener Strömungen mit einem k-epsilon-Modell in idealisierten Becken und dem Bodensee.
Aachen: Shaker, 1998. II,343 S, Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Gray, J. M. N. T. ; Tai, Y.-C. (1998):
On the inclusion of a velocity-dependent basal drag in avalanche models.
In: Annals of glaciology. 26 (1998), S. 277-280, [Article]

Güting, Peter-Matthias ; Hutter, K. (1998):
Modeling wind-induced circulation in the homogeneous Lake Constance using kappa-epsilon closure.
In: Aquatic sciences. 60 (1998), S. 266-277, [Article]

Gray, J. M. N. T. ; Hutter, K. (1998):
Physik granularer Lawinen.
In: Physikalische Blätter. 54 (1998), 1, S. 37-43, [Article]

Gutzer, Ulrich (1998):
Dynamische Identifikation statischer Hysterese am Beispiel eines Leiterseils.
Bad Homburg: Normed-Verl., 1998. II,90 S, Bad Homburg, Normed-Verl, TU Darmstadt,
[Ph.D. Thesis]

Gross, Dietmar ; Schnell, W. ; Ehlers, ; Wriggers, P. (1998):
Formeln und Aufgaben zur Technischen Mechanik. 1: Statik. 5. Aufl.
Berlin, Heidelberg (u.a.): Springer, 1998, Berlin, Heidelberg (u.a.), Springer, [Book]

Gray, J. M. N. T. ; Tai, Y.-C. (1998):
Particle size segregation, granular shocks and stratification patterns.
In: Physics of dry granular media. Hrsg.: H.J. Herrmann (u.a.) S. 697-702, Dordrecht: Kluwer Acad. Publ., 1998, Dordrecht, Kluwer Acad. Publ, [Book Section]

Gödert, Günter ; Hutter, K. (1998):
Induced anisotropy in large ice shields: theory and its homogenization.
In: Continuum mechanics and thermodynamics. 10 (1998), S. 293-318, [Article]

Geißel, Eberhard ; Hartmann, Christoph ; Kasten, ; Roesner, (1998):
Nonstationary supersonic flow around conical bodies.
In: International Conference on Numerical Methods in Fluid Dynamics <16, 1998, Arcachon>: Proceedings. Hrsg.: C.-H. Bruneau. S. 290-295, 515, Berlin (u.a.): Springer, 1998, Berlin (u.a.), Springer, [Conference or Workshop Item]

Greve, Ralf (1997):
Large-scale ice-sheet modelling as a means of dating deep ice cores in Greenland.
In: Journal of glaciology. 43 (1997), No. 144, S. 307-310, [Article]

Görg, Horst (1997):
Entwicklung eines Prognosemodells für Bauabfälle als Baustein von Stoffstrombetrachtungen zur Kreislaufwirtschaft im Bauwesen.
98, Darmstadt: 1996 (ersch. 1997). Getr. Zählung, Darmstadt, 1996 (ersch. 1997). Getr. Zählung, TU Darmstadt,
[Ph.D. Thesis]

Gross, Dietmar (1997):
Werkstoffmechanik.
In: Der Ingenieurbau. Hrsg.: G. Mehlhorn. Bd. 4: Werkstoffe/Elastizitätstheorie. S. 133-164, Berlin: Ernst, 1997, Berlin, Ernst, [Book Section]

Gross, Dietmar ; Feucht, (1997):
Numerical analysis of crack growth in damaging materials.
In: Advances in computational mechanics. Hrsg.: S.N. Atluri (u.a.) S. 240-245, Forsyth (USA): Tech Science Press, 1997, Forsyth (USA), Tech Science Press, [Book Section]

Gray, J. M. N. T. ; Killworth, (1997):
Reply to the comment on the 'Stability of the viscous-plastic sea ice rheology'.
In: Journal of physical oceanography. 27 (1997), S. 482-483, [Article]

Gray, J. M. N. T. ; Svendsen, (1997):
Interaction models for mixtures with application to phase transitions.
In: International journal of engineering sciences. 35 (1997), S. 55-74, [Article]

Greve, Ralf (1997):
A continuum-mechanical formulation for shallow polythermal ice sheets.
In: Philosophical transactions of the Royal Society London. Ser. A. 355 (1997), S. 921-974, [Article]

Greve, Ralf (1997):
Application of a polythermal three-dimensional ice sheet model to the Greenland ice sheet: response to steady-state and transient climate scenarios.
In: Journal of climate. 10 (1997), S. 901-918, [Article]

Gray, J. M. N. T. ; Hutter, K. (1997):
Pattern formation in granular avalanches.
In: Continuum mechanics and thermodynamics. 9 (1997), S. 341-345, [Article]

Gross, Dietmar ; Heimer, ; Hohe, (1997):
Dynamic crack growth in viscoelastic materials.
In: International Union of Theoretical and Applied Mechanics: Symposium on Nonlinear Analysis of Fracture; Proceedings. Hrsg.: J.R. Willis. S. 221-230, Dordrecht: Kluwer, 1997, Dordrecht, Kluwer, [Conference or Workshop Item]

Gross, Dietmar ; Chen, (1997):
3D dynamic interaction of cracks under impact loading.
In: Advances in fracture research. Vol. 6. Hrsg.: B.L. Karihaloo (u.a.) - New York: Pergamon Press, 1997. S. 2721-2730, New York, Pergamon Press, [Book Section]

Gross, Dietmar (1996):
Formeln und Aufgaben zur Technischen Mechanik. Bd. 2: Elastostatik.
4. Aufl., Berlin, Heidelberg (u.a.), Springer, [Book]

Gray, J. M. N. T. (1996):
Water movement in wet snow.
In: Philosophical Transactions of the Royal Society of London. Ser. A. 354 (1996), S. 465-500, [Article]

Gray, J. M. N. T. ; Killworth, ; Killworth, (1996):
Sea ice ridging schemes.
In: Journal of physical oceanography. 26 (1996), S. 2420-2428, [Article]

Greve, Ralf ; MacAyeal, (1996):
Dynamic/thermodynamic simulations of Laurentide ice-sheet instability.
In: Annals of glaciology. 23 (1996), S. 328-335, [Article]

Gross, Dietmar (1996):
Bruchmechanik. 2. Aufl.
Berlin, Heidelberg (u.a.): Springer, 1996. X, 218 S., Berlin, Heidelberg (u.a.), Springer, [Book]

Görg, Andreas (1996):
Die Flächenschnittmethode zur Erzeugung GCn-stetiger Flächenübergänge.
Aachen: Shaker, 1996. 102 S., Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Gianniou, Michail (1996):
Genauigkeitssteigerung bei kurzzeit-statischen und kinematischen Satellitenmessungen bis hin zur Echtzeitanwendung.
In: Deutsche Geodätische Kommission bei der Bayerischen Akademie der Wissenschaften. Reihe C, 458, München, Beck, TH Darmstadt, ISBN 3-7696-9501-1,
[Ph.D. Thesis]

Greve, Ralf (1995):
Thermomechanisches Verhalten polythermer Eisschilde - Theorie, Analytik, Numerik.
Aachen: Shaker, 1995. 226 S., Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Gross, Dietmar ; Zhang, (1995):
On wave propagation in two-phase materials with interface defects.
In: Fracture of brittle disordered materials: Concrete, rock and ceramcs. Hrsg.: G. Baker (et al.) S. 376-390, London: E. & FN. Spon, 1995, London, E. & FN. Spon, [Book Section]

Gray, J. M. N. T. ; Morland, (1995):
The compaction of polar snow packs.
In: Cold regions science and technology. 23 (1995), No. 2, S. 109-119, [Article]

Gray, J. M. N. T. ; Morland, ; Moris, (1995):
A phase changing dry snow pack model.
In: Journal of glaciology. 41 (1995), No. 137, S. 11-29, [Article]

Gray, J. M. N. T. ; Killworth, (1995):
Stability of the viscous plastic sea ice rheology.
In: Journal of physical oceanography. 25 (1995), S. 971-978, [Article]

Gray, J. M. N. T. ; Morland, ; Colbeck, (1995):
The effect in change in thermal properties on the propagation of a periodic thermal wave: Application to a snow buried rocky outcrop.
In: Journal of geophysical research. B 100 (1995), S. 15,267-15,279, [Article]

Gross, Dietmar (1995):
Fracture dynamics: Some recent results.
In: Acta mechanica solida Sinica. 8 (1995), S. 171-176, [Article]

Gross, Dietmar ; Hauger, W. ; Schnell, W. (1995):
Technische Mechanik. Bd. 1: Statik. 5. Aufl.
Berlin, Heidelberg (u.a.): Springer, 1995, Berlin, Heidelberg (u.a.), Springer, [Book]

Greve, Ralf ; Hutter, K. (1995):
Polythermal three-dimensional modelling of the Greenland ice sheet with varied geothermal heat flux.
In: Annals of glaciology. 21 (1995), S. 8-12, [Article]

Gerlich, T. ; Roesner, (1995):
Instabilitäten der laminaren instationären Plattengrenzschicht aufgrund der Wirkung von Geschwindigkeitsschwankungen der Hauptströmung.
In: Zeitschrift für angewandte Mathematik und Mechanik. 75 (1995), SII, S. S253-S254, [Article]

Gross, Dietmar ; Hauger, W. ; Schnell, W. ; Wriggers, P. (1995):
Technische Mechanik. Bd. 4: Hydromechanik, Elemente der höheren Mechanik, numerische Methoden. 2. Aufl.
Berlin, Heidelberg (u.a.): Springer, 1995, Berlin, Heidelberg (u.a.), Springer, [Book]

H

Hesse, M. ; Ebert, T. ; Zimmer, M. ; Scheuren, S. ; Schaumann, G. ; Roth, M. (2021):
Spatially resolved online particle detector using scintillators for laser-driven particle sources.
In: Review of Scientific Instruments, 92 (9), AIP Publishing, ISSN 0034-6748,
DOI: 10.1063/5.0052507,
[Article]

Hoßbach, Phillip Maxim (2019):
Automatic Derivation of Dependency Chains within Systems for Automated Driving via Ontology Based Scenario Representations.
Darmstadt, Technische Universität, [Master Thesis]

Hatzfeld, Christian ; Kern, Thorsten Alexander ; Neupert, Carsten ; Lotichius, Jan ; Werthschützky, Roland
Technische Universität Darmstadt, Continental Corporation (eds.) (2013):
Network Representation of User’s Mechanical Impedance as Design and Evaluation Basis for Task-Specific Haptic Systems.
Sensor 2013, Nürnberg, [Conference or Workshop Item]

Hück, Alexander (2013):
Automatic Source Transformation and Performance Evaluation for Optimized Utilization of the Matlab Runtime System.
TU Darmstadt, [Master Thesis]

Habibi, Meisam K. ; Pouriayevali, Habib ; Hamouda, A. M. S. ; Gupta, Manoj (2012):
Differentiating the mechanical response of hybridized Mg nano-composites as a function of strain rate.
In: Materials Science and Engineering: A, 545, pp. 51-60. ISSN 09215093,
[Article]

Hanisch, Thomas ; Filzek, Jan ; Müller, Christoph (PtU) (2012):
Tribological Characterization of Industrial Cold Forging Processes by Laboratory Testing.
Proceedings of TAE 2012, [Conference or Workshop Item]

Hanisch, Thomas ; Filzek, Jan ; Müller, Christoph (PtU) (2012):
Tribological Characterization of Industrial Cold Forging Processes by Laboratory Testing.
In: Tribologie und Schmierungstechnik, expert verlag, Renningen, 59 (6), pp. 36-40. [Article]

Horn, Silke (2012):
Tropical oriented matroids and cubical complexes.
München, Dr. Hut, TU Darmstadt, ISBN 978-3-8439-0659-3 ; 3-8439-0659-9,
[Ph.D. Thesis]

Habibi, Meisam K. ; Pouriayevali, Habib ; Gupta, Manoj (2011):
Effect of strain rate and ball milling of reinforcement on the compressive response of magnesium composites.
In: Composites Part A: Applied Science and Manufacturing, 42 (12), pp. 1920-1929. ISSN 1359835X,
[Article]

Hatzfeld, Christian ; Rausch, Jacqueline ; Karsten, Roman ; Werthschützky, Roland
TU Darmstadt, Institut für Elektromechanische Konstruktionen, LOEWE-Zentrum AdRIA (eds.) (2011):
Strain Measurement on Stiff Structures – Experimental Evaluation of Three Integrated Measurement Principles.
In: Conference Proceedings,
Adaptronic Congress, Darmstadt, 2011, [Conference or Workshop Item]

Harders, Christina (2008):
Modulation der MHC Klasse Antigenprozessierung durch onkogene Transformation.
Darmstadt: 1999. C, III, 192 Bl, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hortig, Peter (2008):
Zyklisches Langzeitverhalten von Schutzschichten auf Gasturbinenschaufelwerkstoffen unter betriebsnaher Kriechermüdungsbeanspruchung.
Darmstadt: 1996. VI, 115, [124] S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hartung, J. ; Greb, M. ; Svoboda, I. ; Fuess, H. (2006):
Methyl 5-cis-bromo-2,2,6-trimethyl-6-trans-phenyltetrahydropyran-3-carboxylate.
In: Acta Crystallographica E, 62, pp. o4975-o4976. [Article]

Hondo, H. ; Moriizumi, Y. ; Sakao, T. (2006):
A Method for Technology Selection considering Environmental and Socio-Economic Impacts : Input-Output Optimization Model and its Application to Housing Policy.
In: The international journal of life cycle assessment, 11, pp. 383-393. [Article]

Hohe, J. ; Becker, Wilfried (2005):
A probabilistic approach to the numerical homogenization of irregular solid foams in the finite strain regime.
In: International Journal of Solids and Structures, 42, pp. 3549-3569. [Article]

Hilligardt, Jan (2005):
Regionale Kooperation der Landkreise, Städte und Gemeinden : Stand - Potenziale - Perspektiven.
164, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt, ISBN 3-932518-60-8,
[Ph.D. Thesis]

Henn, Regine ; Klug, Tina ; Schmiede, Rudi (2005):
Der Mensch im Büro.
In: Bürobau-Atlas : Grundlagen, Planung, Technologie, Arbeitsplatzqualitäten / Johann Eisele; Staniek, Bettina [Hrsg.]. München : Callwey, 2005. -S. 192-199 ISBN 3-7667-1649-2, [Book Section]

Hebel, Jochen ; Becker, Wilfried ; Wenck, J. ; Müller, A. (2005):
Mechanical simulation of modern racing skis.
In: Proceedings / 18. Symposium Simulationstechnique, ASIM 2005 : Erlangen, September 12 - 15, 2005 / [Friedrich-Alexander-Universität Erlangen-Nürnberg ...]. Ed. by Frank Hülsemann .... - Erlangen : SCS Publ. House, 2005 (Frontiers in simulation ; 15, Buc, Erlangen, SCS Publ. House, [Conference or Workshop Item]

Hohe, Jörg ; Hebel, Jochen ; Siegele, D. (2005):
Quantifizierung von Mehrachsigkeitseffekten im Rahmen des Mastercurve-Konzepts.
In: Technische Sicherheit, Zuverlässigkeit und Lebensdauer : Themenschwerpunkt: Bruchmechanische Schadensanalyse; 37. Tagung des DVM-Arbeitskreises Bruchvorgänge; 22. und 23. Februar 2005 an der TU Hamburg-Harburg / Obmann des Arbeitskreises: Meinhard Kuna., Berlin, DVM, [Conference or Workshop Item]

Hohe, Jörg ; Hebel, Jochen ; Siegele, D. (2005):
Two parameter approaches in the probabalistic failure assessment of ferritic steels.
In: Honour and plenary lectures presented at the 11th International Conference on Fracture (ICF11) : held in Turin, Italy, on March 20 - 25, 2005 / guest eds.: Alberto Carpintieri .... - Dordrecht : Springer, 2006 (International journal of fracture ; 138,1/4), Dordrecht, Springer, [Conference or Workshop Item]

Hoelzel, Markus ; Danilkin, S. A. ; Ehrenberg, Helmut ; Toebbens, D. M. ; Udovic, T. J. ; Fuess, Hartmut ; Wipf, Helmut (2004):
Effects of high-pressure hydrogen charging on the structure of austenitic stainless steels.
In: Materials science and engineering / A, 384, pp. 255-261. [Article]

Hutter, Kolumban ; Jöhnk, Klaus (2004):
Continuum methods of physical modeling : continuum mechanics, dimensional analysis, turbulence ; with 14 tables, 113 exercises and solutions.
Berlin, Springer, ISBN 3-540-20619-1,
[Book]

Hayat, Tasawar ; Wang, Y. ; Siddiqui, A. M. ; Asghar, S. (2004):
A mathematical model for the study of gliding motion of bacteria on a layer of non-Newtonian slime.
In: Mathematical Methods in the Applied Sciences, 27, pp. 1447-1468. [Article]

Herzfeld, Uta C. ; Clarke, G. K. C. ; Mayer, Helmut ; Greve, Ralf (2004):
Derivation of deformation characteristics in fast-moving glaciers.
In: Computers & Geosciences, 30, pp. 291-302. [Article]

Hohe, J. ; Becker, Wilfried (2004):
On the effect of cell irregularity on the effective behaviour of solid foams.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, pp. 260-261, [Conference or Workshop Item]

Hohe, J. ; Becker, Wilfried (2004):
Probabilistic homogenization of hyperelastic solid foams.
In: ICTAM04 [International Congress of Theoretical and Applied Mechanics <21, 2004, Warschau>] : abstracts book and CD-Rom proceedings . - Hrsg. W. Gutkowski ; T. A. Kowalewski . - Warschau : IPPT PAN 2004, [Conference or Workshop Item]

Hergt, P. ; Meschkat, Stephan ; Stoffel, B. (2004):
The flow and head distribution within the volute of a centrifugal pump in comparison with the characteristics of the impeller without casing.
In: Journal of computational and applied mechanics, 5 (2), pp. 275-285. University of Miskolc, ISSN 1586-2070,
[Article]

Hayat, Tasawar ; Wang, Yongqi ; Hutter, Kolumban (2004):
Hall effects on the unsteady hydromagnetic oscillatory flow of a second-grade fluid.
In: International Journal of Non-Linear Mechanics, 39 (6), pp. 1027-1037. Elsevier Science, ISSN 0020-7462,
DOI: 10.1016/S0020-7462(03)00094-5,
[Article]

Hayat, Tasawar ; Wang, Yongqi ; Hutter, Kolumban ; Asghar, S. ; Siddiqui, A. M. (2004):
Peristaltic transport of an Oldroyd-B fluid in a planar channel.
In: Mathematical Problems in Engineering, 2004 (4), pp. 347-376. Hindawi Publishing Corporation, ISSN 1024-123X,
DOI: 10.1155/S1024123X04405043,
[Article]

Hofer, Daniel (2003):
Simulation von Größeneffekten mit mikromorphen Theorien.
Darmstadt, Technische Universität, TU Darmstadt,
[Ph.D. Thesis]

Hofer, Daniel (2003):
Simulation von Größeneffekten mit mikromorphen Theorien.
Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hohe, Jörg ; Becker, Wilfried (2003):
Effective stress analysis of elastomeric foams in the finite strain regime.
In: Proceedings of the International Conference on Applied Mechanics and Materials <2, 2003, 21.-23.1.03, Durban, Südafrika>, 2003, S. 297-302, [Conference or Workshop Item]

Hartmann, Michael (2003):
Individuelle Karrierepolitik oder herkunstabhängiger Aufstieg? : Spitzenkarrieren in Deutschland.
In: Karrierepolitik. Hrsg.: Ronald Hitzler. - Opladen: Leske + Budrich, 2003, 159-171. (Reihe "Soziologie der Politik" ; 6), Opladen, Leske + Budrich, [Book Section]

Herzfeld, Uta C. ; Mayer, Helmut (2003):
Seasonal comparison of ice-surface structures in the ablation area of Jakobshavn Isbrae drainage system, West Greenland.
In: Annals of glaciology, 37, pp. 199-206. [Article]

Hutter, Kolumban ; Pudasaini, Shiva P. (2003):
Sind Lawinen, Hangrutschungen, Bergstürze und Muren berechenbare Elemente alpiner Naturgefahren?
In: Thema Forschung [Technische Universität Darmstadt], pp. 34-43. [Article]

Hutter, Kolumban ; Wang, Yongqi ; Pudasaini, Shiva P. (2003):
The Savage-Hutter avalanche model : how far can it be pushed?
Cambri, Cambridge, Isaac Newton Inst. for Mathematical Sciences, [Book]

Hayat, Tasawar ; Nadeem, S. ; Pudasaini, Shiva P. ; Asghar, S. (2003):
Fluctuating flow of a third order fluid past an infinite plate with variable suction.
In: Archives of mechanics, 55, pp. 305-324. [Article]

Hohe, Jörg ; Goswami, S. ; Becker, Wilfried (2003):
Assessment of interface stress concentrations in layered composites with application to sandwich panels.
In: Computational Materials Science, 26, pp. 71-79. [Article]

Hohe, Jörg ; Becker, Wilfried (2003):
Finite strain analysis of hyperelastic solid foams.
In: International Conference on the Mechanical Behaviour of Materials <9, 2003, Geneva, Switzerland> : Proceedings, CD-ROM, [Conference or Workshop Item]

Hohe, Joerg ; Becker, Wilfried (2003):
Effective mechanical behaviour of hyperelastic honeycombs and two-dimensional model : foams at finite strain.
In: Iinternational journal of mechanical sciences, 45, pp. 891-913. [Article]

Hohe, Joerg ; Becker, Wilfried (2003):
Geometrically nonlinear homogenization analysis of hyperelastic solid foams.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 3, pp. 178-179, [Conference or Workshop Item]

Hutter, Kolumban ; Hsiau, S. S. ; Teufel, Andreas ; Smid, J. ; Lu, L. S. ; Yang, W. L. ; Tai, C. H. ; Chen, C. C. ; Tu, W. D. ; Liu, C. H. (2003):
A first look on abrasion in granular shear flows.
In: International Conference for Conveying and Handling of Particulate Solids : Proceedings <4, 2003, Budapest>, Proceedings, 1. 2003, S. 432-438, [Conference or Workshop Item]

Hayat, Tasawar ; Wang, Yongqi ; Siddiqui, A. M. ; Hutter, Kolumban (2003):
Peristaltic motion of a Johnson-Segalman fluid in a planar channel.
In: Mathematical Problems in Engineering, 2003 (1), pp. 1-23. Hindawi Publishing Corporation, ISSN 1024-123X,
DOI: 10.1155/S1024123X03308014,
[Article]

Hutter, Kolumban ; Wang, Yongqi
Greven, Andreas ; Keller, Gerhard ; Warnecke, Gerald (eds.) (2003):
Phenomenological thermodynamics and entropy principles.
In: Princeton series in applied mathematics, In: Entropy, pp. 57-78, Princeton ; Oxford, Princeton University Press, ISBN 0-691-11338-6,
[Book Section]

Hayat, Tasawar ; Wang, Yongqi (2003):
Magnetohydrodynamic flow due to noncoaxial rotations of a porous disk and a fourth-grade fluid at infinity.
In: Mathematical Problems in Engineering, 2003 (2), pp. 47-64. Hindawi Publishing Corporation, ISSN 1024-123X,
DOI: 10.1155/S1024123X03308026,
[Article]

Hoffmann, Peter (2002):
Characterization of aerosols by TXRF and EPMA.
In: Russian Synchrotron Radiation Conference <14, 2002, Novosibirsk>: Digest reports; Russia, July 15-19, 2002.- Novosibirsk, 2002.- S. 58, [Conference or Workshop Item]

Hofmann, Norbert ; Müller-Gronbach, Thomas (2002):
On the global error of Ito-Taylor schemes for strong approximation of scalar stochastic differential equations.
In: Technische Universität Darmstadt. Fachbereich Mathematik: Preprint, 2192, Darmstadt, Technische Universitaet Darmstadt, Fachbereich Mathematik, [Book]

Hauser, R. A. ; Kirchner, Nina P. (2002):
A historical note on the entropy principle of Müller and Liu.
In: Continuum mechanics and thermodynamics, 14, pp. 223-226. [Article]

Huang, G. Y. ; Wang, Y. S. ; Gross, Dietmar (2002):
Fracture analysis of functionally graded coatings : antiplane deformation.
In: European journal of mechanics A : solids, 21, pp. 391-400. [Article]

Huang, G. Y. ; Wang, Y. S. ; Gross, Dietmar (2002):
Transient dislocation emission from a crack tip under dynamic mode II loading.
In: Zeitschrift für angewandte Mathematik und Physik (ZAMP), 53, pp. 839-854. [Article]

Hauger, Werner ; Gross, Dietmar ; Schnell, Walter (2002):
Technische Mechanik : Bd. 3 : Kinetik.
Berlin, Springer-Verl., ISBN 3-540-43257-4,
[Book]

Hayat, Tasawar ; Wang, Yongqi ; Hutter, Kolumban (2002):
Flow of a fourth grade fluid.
In: Mathematical Models and Methods in Applied Sciences (M3AS), 12 (6), pp. 797-811. World Scientific Publishing Company, ISSN 0218-2025,
DOI: 10.1142/S0218202502001908,
[Article]

Hayat, T. ; Wang, Yongqi ; Siddiqui, A. M. ; Hutter, K. ; Asghar, S. (2002):
Peristaltic transport of a third-order fluid in a circular cylindrical tube.
In: Mathematical Models and Methods in Applied Sciences (M3AS), 12 (12), pp. 1691-1706. World Scientific Publishing Company, ISSN 0218-2025,
DOI: 10.1142/S0218202502002288,
[Article]

Huber, N. ; Tsakmakis, Ch. (2001):
Determination of Poisson's ration by spherical indentation using neural networks. Part II: Identification method.
In: Journal of applied mechanics, 68, pp. 224-229. [Article]

Hutter, Kolumban (2001):
Prioritäten in der Murgangsdynamik - Stellen wir die richtigen Fragen?
In: Mitteilungen des Lerhstuhls und Instituts für Waserbau und Waserwirtschaft der Rheinisch-Westfälischen Technischen Hochschle Aachen. Bd. 124 (2001), S.96-105, [Article]

Hüttemann, H. ; Hutter, K. (2001):
Baroclinic solitary water waves in a two-layer fluid system with diffusive interface.
In: Experiments in fluids, 30, pp. 317-326. [Article]

Hadulla, Thomas (2000):
Wirbelerregte Schwingungen in Freileitungsbündeln.
Herdecke, GCA-Verl., TU Darmstadt,
[Ph.D. Thesis]

Hoffmann, Karl-Josef (2000):
Integrierte aktive Magnetlager.
Herdecke, GCA-Verl., TU Darmstadt,
[Ph.D. Thesis]

Heigl, Christian ; Scholand, Markus (1999):
Innovative Konzepte in deutschen Aktiengesellschaften.
In: Personalwirtschaft. 1999, H. 1, S. 28-33, [Article]

Hauger, Werner ; Gross, D. (1999):
Technische Mechanik. 3: Kinetik.
Berlin, Heidelberg (u.a.), Springer, [Book]

Hutter, Kolumban (1999):
Mathematical foundation of ice sheet and ice shelf dynamics - a physicist's view.
In: Free boundary problems: theory and applications. Hrsg.: I. Athanasopoulos, G. Makrakis, J.F. Rodrigues. Boca Raton, Fla.: Chapman and Hatt/CRC, 1999. S. 192-203, [Book Section]

Hutter, Kolumban ; Laloui, L. ; Vulliet, L. (1999):
Thermomechanically based mixture models of saturated and unsaturated soils.
In: Mechanics of cohesive-frictional materials, 4, pp. 295-338. [Article]

Hutter, Kolumban ; Straughan, B. (1999):
Models for convection in thawing porous media in support for the subsea permafrost equations.
In: Journal of geophysical research, 104, pp. 29249-29260. [Article]

Hutter, Kolumban ; Svendsen, B. (1999):
Classical mixture models for polythermal ice.
In: Advances in cold-region thermal engineering and sciences. Hrsg.: K. Hutter, Y. Wang, H. Beer. Berlin, Heidelberg (u.a.): Springer, 1999. S. 197-214 (Lecture notes in physics; 533), [Book Section]

Heydemann, Martin (1998):
Lernen von Kategorien.
Wiesbaden: Deutscher Univ.-Verl., 1998. 249 S, Wiesbaden, Deutscher Univ.-Verl, [Habilitation]

Hoffmann, Karl-Josef ; Markert, Richard (1998):
Linearisierung von Magnetlagerkräften per Software.
In: Zeitschrift für angewandte Mathematik und Mechanik. 78 (1998), Suppl. 2, S. 489-490, [Article]

Hagedorn, Peter (1998):
The importance of rotor flexibility in ultrasonic traveling wave motors.
In: Journal of smart materials and structures, 7, pp. 352-368. [Article]

Hartmann, Christoph ; Kasten, ; Roesner, (1998):
Shock waves around bodies in unsteady flow fields.
In: Advances in fluid mechanics and turbomachinery. Hrsg.: H.J. Rath (u.a.) S. 77-85, Berlin (u.a.): Springer, 1998, Berlin (u.a.), Springer, [Book Section]

Hoffmann, Karl-Josef (1998):
Integrated active magnetic bearings.
In: International Symposium on Magnetic Bearings <6, 1998>: Proceedings. Hrsg.: P.E. Allaire. - Lancaster, Basel: Technomic Publ., 1998. S. 256-265, Lancaster, Basel: Technomic Publ., 1998, Lancaster, Basel, Technomic Publ, [Conference or Workshop Item]

Hutter, Kolumban ; Bauer, G. ; Wang, Yongqi ; Güting, P.
Imberger, J. (ed.) (1998):
Forced Motion Response in Enclosed Lakes.
In: Coastal and Estuarine Studies, In: Physical processes in lakes and oceans, pp. 137-166, Washington, D.C, American Geophysical Union, ISBN 0875902685,
[Book Section]

Hagedorn, Peter (1997):
Mathematical model for piezoelectric motors: an example of mechatronic modelling.
In: COBEM 97: Brazilian Congress of Mechanical Engineering <14, 1997, Rio de Janeiro, Brazil>: Proceedings, Bauru, Brazil, [Conference or Workshop Item]

Hoffmann, Michael J. ; Fiedler, Udo ; Emmel, Thomas ; Prielipp, Helge ; Claussen, Nils ; Gross, Dietmar ; Rödel, Jürgen (1997):
Fracture behaviour in fibre reinforced ceramics.
In: Acta Materialia, 45 (9), pp. 3609-3623. ISSN 1359-6454,
[Article]

Hilbrandt, Nicole (1997):
In-situ-Röntgenabsorptionsspektroskopie an dotierten Oxiden bei hohen Temperaturen (T >1200 K) und definierten Sauerstoffaktivitäten.
Aachen: Shaker, 1997. 203 S, Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Hemberger, Joachim (1997):
Dielektrische Spektroskopie am Orientierungsglasübergang: lineares und nichtlineares Verhalten in Betain-Mischkristallen.
Aachen: Shaker, 1997. 165 S, Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Hagedorn, Peter (1997):
Investigation of a new formulation of the Lagrange method for constrained dynamic systems.
In: Journal of applied mechanics, 64, pp. 1024-1028. [Article]

Hoffmann, Karl-Josef ; Laier, D. ; Markert, Richard (1997):
Integrationsaspekte bei aktiven Magnetlagern.
In: Wissenschaftliche Berichte der Hochschule Zittau. Nr. 1609-1619: H. 519: Magnetlagertechnik (1997), S. 55-60, [Article]

Hutter, Kolumban (1997):
Schnee- und Gletscherrheologie.
In: Applied rheology. 1997, S. 266-276, [Article]

Hutter, Kolumban ; Straughan, (1997):
Penetrative convection in thawing subsea permafrost.
In: Continuum mechanics and thermodynamics. 9 (1997), S. 259-272, [Article]

Hoffmann, Karl-Josef ; Markert, Richard (1997):
Linearisierung von magnetischen Lagerungen für elastische Rotoren per Software.
In: Mechatronik im Maschinen- und Fahrzeugbau: Tagung Moers, März 1997. - Düsseldorf: VDI-Verl., 1997. S. 407-418, 1315, Düsseldorf: VDI-Verl., 1997, Düsseldorf, VDI-Verl., [Conference or Workshop Item]

Hoffmann, Karl-Josef ; Laier, D. ; Markert, Richard (1997):
Non-linear control of magnetically supported rotors.
In: Industrial Conference and Exhibition on Magnetic Bearings: MAG '97: Proceedings. - Lancaster, Basel: Technomic Publ., 1997. S. 271-280, Lancaster and Basel: Technomic Publ., 1997, Lancaster and Basel, Technomic Publ, [Conference or Workshop Item]

Hohe, Jörg ; Gross, Dietmar (1997):
Analyse des duktilen Rißwachstums mit Hilfe eines Streifen-Schädigungsmodells.
In: Fließbruchmechanik: Abschlußkolloquium des Schwerpunktprogrammes der DFG in Zsarb. mit dem DVM. S. 73-82, Berlin: Deutscher Verband für Materialprüfung, 1997, Berlin, Deutscher Verband für Materialprüfung, [Conference or Workshop Item]

Hartmann, Christoph ; Roesner, (1997):
Numerical investigation of 3D shock focusing effects on the basis of the Navier-Stokes equation.
In: Computational fluid dynamics journal. 6 (1997), S. 279-296, [Article]

Hagedorn, Peter ; Botz, M. (1997):
Elastic Plates in Multibody Systems: A Treatment Using Existing Rigid Body Codes.
In: Multibody System Dynamics, 1, pp. 351-359. [Article]

Haufe, Andreas (1996):
Untersuchung zur Vorhersage der Bindenahtfestigkeit in spitzgegossenen Formteilen.
Darmstadt: 1996. VIII, 110 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Herrmann, Matthias (1996):
Molekulare Ursachen für die antiproliferative Wirkung von Leflunomid.
Darmstadt: 1996. 119 Bl., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hortig, Peter (1996):
Zyklisches Langzeitverhalten von Schutzschichten auf Gasturbinenschaufelwerkstoffen.
Darmstadt: 1996. VI, 115, [124] S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hieß, Arno (1996):
Untersuchungen zur Konkurrenz der magnetischen Wechselwirkungen in elektronisch hochkorrelierten Metallen.
Aachen: Shaker, 1996. VII, 152 S., Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Hartmann, Christoph (1996):
Numerische Simulation dreidimensionaler Stossfokussierungseffekte.
Aachen: Shaker, 1996. 109 S., Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Hohe, Jörg (1996):
Analyse der duktilen Rissausbreitung mit Hilfe eines Schädigungs-Kohäsivzonenmodells.
Darmstadt: 1996. 121 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hildebrand, Axel (1996):
Bestimmung computer-graphischer Beschreibungsattribute für reale 3D-Objekte mittels Analyse von 2D-Rasterbildern.
Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hou, Xiaosong (1996):
Analyse der bleibenden Verformungen des Asphaltes unter statischer und dynamischer Belastung zur Vorhersage von Spurrinnen.
Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hansen, I. ; Greve, R. ; Hutter, K. ; Greve, R. ; Hutter, K. (1996):
Application of a polythermal ice sheet model to the Antarctic ice sheet.
In: International Symposium on Thermal Engineering and Sciences for Cold Regions <1996, Ottawa, Canada>: Proceedings. Hrsg.: Y. Lee (u.a.) S. 89-96, [Conference or Workshop Item]

Hutter, Kolumban ; Svendsen, ; Rickenmann, ; Svendsen, ; Rickenmann, (1996):
Debris flow modeling: a review.
In: Continuum mechanics and thermodynamics. 8 (1996), S. 1-35, [Article]

Huybrechts, Philippe ; Pyne, Tony (1996):
The EISMINT benchmarks for testing ice-sheet models.
In: Annals of glaciology. 23 (1996), S. 1-12, [Article]

Hansen, I. (1996):
Polythermal modelling of steady states of the Antarctic ice sheet in comparison with the real world.
In: Annals of glaciology. 23 (1996), S. 382-387, [Article]

Heimer, Stefan (1996):
Crack tip fields for rapidly grown cracks in viscoplastic materials.
In: Mechanisms and mechanics of damage and failure: Proc. of the 11th European Conference on Fracture, Poitiers, Sept 1996. Vol. 1. Hrsg.: J. Petit. S. 437-442, Warley: European Microbeam Analysis Society, 1996, Warley, European Microbeam Analysis Society, [Conference or Workshop Item]

Hohe, Jörg ; Gross, (1996):
Analysis of ductile crack growth by means of a damage yield strip model.
In: Localized damage, IV: Computer-aided assessment and control. Hrsg.: H. Nisitani (u.a.), S. 457-464, Southampton: Computational Mechanics Publ., 1996, Southampton, Computational Mechanics Publ, [Book Section]

Herr, Werner (1996):
Röntgenographische Untersuchungen über die thermische Stabilität von Struktur und Eigenspannungen gesputterter PVC-Schichten und deren Einfluß auf die mechanischen und tribologischen Eigenschaften.
Aachen: Shaker, 1996. IV, 152 S., Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Heinze, Ottmar (1996):
Aufbau eines operablen inertialen Vermessungssystems zur Online-Verarbeitung in der Geodäsie auf Basis eines kommerziellen Strapdown Inertialsystems.
In: Deutsche Geodätische Kommission bei der Bayerischen Akademie der Wissenschaften Reihe C, 459, München, Beck, TH Darmstadt, ISBN 376969502X,
[Ph.D. Thesis]

Herbert, Tobias (1995):
Der Pion-Propagator in RPA-Näherung mit Delta-Anregung im Sigma-Omega-Pi-Modell der Quantenhadrodynamik bei endlicher Temperatur.
Darmstadt: 1995. 97 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hektor, Thomas (1995):
Untersuchungen zur Zymogenaktivierung des rekombinanten humanen Speicheldrüsen-Prokallikreins.
Darmstadt: 1995. 141 Bl., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Hadulla, Thomas ; Hagedorn, Peter ; Seemann, W. (1995):
Damping mechanisms in bundled conductors of overhead transmission lines.
In: International Symposium on Cable Dynamics <1995, Liège, Belgium>: Proceedings. S. 365-372, [Conference or Workshop Item]

Hartmann, Christoph ; Roesner, (1995):
Investigation of 3-D shock focusing effects on a massively parallel computer.
In: International Conference on Numerical Methods in Fluid Dynamics <14, 1994, Bangalore, India>: Proceedings. Hrsg.: S.M. Deshpande (u.a.) S.472-475, 453, Berlin, Heidelberg (u.a.): Springer, 1995, Berlin, Heidelberg (u.a.), Springer, [Conference or Workshop Item]

Hueck, U. ; Wriggers, P. (1995):
A formulation for the four-node quadrilateral element. Pt. 1: Plane element.
In: International journal for numerical methods in engineering. 38 (1995), S. 3007-3037, [Article]

Hwang, H. ; Hutter, K. (1995):
A new kinetic model for rapid granular flow.
In: Continuum mechanics and thermodynamics. 7 (1995), S. 357-384, [Article]

Hutter, Kolumban (1995):
Fluid- und Thermodynamik: e. Einführung.
Berlin, Heidelberg (u.a.): Springer, 1995. XII,445 S., Berlin, Heidelberg (u.a.), Springer, [Book]

Hutter, Kolumban ; Koch, ; Plüss, ; Savage, (1995):
The dynamics of avalanches of granular materials from initiation to runout. Pt. II: Experiments.
In: Acta mechanica. 109 (1995), S. 127-165, [Article]

Heimer, Stefan ; Hohe, ; Gross, (1995):
On fast crack propagation in viscoplastic materials.
In: Archives of mechanics. 47 (1995), S. 829-844, [Article]

Heinle, H. ; Stagge, (1995):
Bestimmung der Kornverteilung, insbesondere des 'ersten Kornes' mit dem Coulter Multisizer II.
In: Materialwissenschaft und Werkstofftechnik. 26 (1995), S. 176-177, [Article]

Hauger, Werner ; Schnell, W. ; Gross, D. (1995):
Technische Mechanik. Bd. 3: Kinetik. 5. Aufl.
Berlin, Heidelberg (u.a.), Springer, [Book]

Hueck, U. ; Schreyer, ; Wriggers, P. (1995):
On the incompressibility constraint of the four-node quadrilateral element.
In: International journal for numerical methods in engineering. 38 (1995), S. 3039-3053, [Article]

I

Isler, Rafet (1996):
Theoretische und experimentelle Untersuchungen an einer Gleitringdichtung.
Darmstadt: 1996. VI, 79, 17 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Imhof, Michael (1996):
Zur Behandlung thermomechanischer Kontaktprobleme mit Hilfe von Bézier-Splines.
Darmstadt: 1996. 168 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

J

Jearsiripongkul, Thira (2005):
Squeal in floating caliper disk brakes : a mathematical model.
Waabs, GCA-Verl., TU Darmstadt, ISBN 3-89863-203-2,
[Ph.D. Thesis]

Janich, Nina ; Näßl, Susanne
Janich, Nina ; Thim-Mabrey, Christiane (eds.) (2003):
Sprachidentität - Identität durch Sprache.
465, Tübingen, Narr, ISBN 3-8233-5761-1,
[Book]

Jöhnk, Klaus (2000):
1D hydrodynamische Modelle in der Limnophysik: Turbulenz - Meromixis - Sauerstoff.
Darmstadt, Techn. Univ., [Habilitation]

Jung, Udo (1996):
FEM-Simulation und experimentelle Optimierung des Festwalzens bauteilähnlicher Proben unterschiedlicher Größe.
Darmstadt: 1996. VI, 109 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Jehn, Rüdiger (1996):
Modelling debris clouds.
Aachen: Shaker, 1996. VI, 183 S., Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Jäpel, Irg (1996):
Existenztheorie zu den Gleichungen der Viskoelastizität bei endlichen Deformationen.
Darmstadt: 1996. 69 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

K

Klein, Dominik K. ; Ortigosa, Rogelio ; Martínez-Frutos, Jesús ; Weeger, Oliver (2022):
Finite electro-elasticity with physics-augmented neural networks.
In: Computer Methods in Applied Mechanics and Engineering, 400, p. 115501. Elsevier, ISSN 0045-7825,
DOI: 10.1016/j.cma.2022.115501,
[Article]

Klein, Dominik K. ; Ortigosa, Rogelio ; Martínez-Frutos, Jesús ; Weeger, Oliver (2022):
Finite electro-elasticity with physics-augmented neural networks. (Preprint)
Darmstadt, DOI: 10.26083/tuprints-00021517,
[Report]

Kuebert, Thomas ; Puder, Henning ; Koeppl, Heinz (2019):
Daily Routine Recognition with Visual Interactive Labeling by Fusing Acceleration and Audio Signals.
In: 2019 IEEE International Symposium on Signal Processing and Information Technology (ISSPIT'19),
IEEE, 19th International Symposium on Signal Processing and Information Technology, Ajman, United Arab Emirates, 10.-12.12.2019, ISBN 978-1-7281-5341-4,
DOI: 10.1109/ISSPIT47144.2019.9001791,
[Conference or Workshop Item]

Kobler, Aaron (2015):
Untersuchung der Deformationsmechanismen in nanostrukturierten Metallen und Legierungen mit Transmissionselektronenmikroskopie.
Darmstadt, TUPrints, TU Darmstadt,
[Ph.D. Thesis]

Kuhn, Carmen ; Bosse, Hans-Joachim ; Schabel, Samuel (2015):
Skript zur Lehrveranstaltung im Maschinenbau Einführung in wissenschaftliches Arbeiten und Schreiben.
Darmstadt, Einführung in wissenschaftliches Arbeiten und Schreiben , TU Darmstadt, jedes Semester, [Lecture]

Kuhn, Carmen ; Bosse, Hans-Joachim ; Schabel, Samuel (2015):
Skript zur Lehrveranstaltung im Maschinenbau Einführung in wissenschaftliches Arbeiten und Schreiben.
Darmstadt, Einführung in wissenschaftliches Arbeiten und Schreiben, TU Darmstadt, jedes Semester, [Lecture]

Kuhl, Alexander (2015):
Entwicklung und Realisierung eines 40 GHz Ankunftszeitmonitors für Elektronenpakete für FLASH und den European XFEL.
Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Koruza, Jurij ; Malič, Barbara (2014):
Initial stage sintering mechanism of NaNbO3 and implications regarding the densification of alkaline niobates.
In: Journal of the European Ceramic Society, 34 (8), pp. 1971-1979. ISSN 09552219,
[Article]

Klassen, Markus ; Xu, Bai-Xiang ; Müller, Ralf (2013):
The influence of incompressibility on the microstructure of dielectric elastomers.
In: Proceedings in Applied Mathematics and Mechanics (PAMM), 13 (1), pp. 221-222. John Wiley and Sons, ISSN 1617-7061,
DOI: 10.1002/pamm.201310106,
[Article]

Kraus, Roman ; Millitzer, Jonathan ; Hatzfeld, Christian ; Werthschützky, Roland
LOEWE-Zentrum AdRIA, Darmstadt, Fraunhofer LBF, Darmstadt, Institut für Elektromechanische Konstruktionen, TU Darmstadt (eds.) (2011):
Entwicklung eines hybriden aktiven Lagerungssystems mit paralleler Krafteinleitung.
Düsseldorf, 37. Deutsche Jahrestagung für Akustik, DAGA 2011, Düsseldorf, 21. bis 24. März 2011, [Conference or Workshop Item]

Kilian, Thomas (2008):
Abflußcharakteristika und potentiell natürliche Gerinnegrundrißformen von Fließgewässern in den verschiedenen Regionen Hessens.
100, Darmstadt: 1997. Getr. Zählung, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Klug, Tina (2007):
Complexities of flexible labor : dimensions and consequences.
Darmstadt, Technische Universität, TU Darmstadt,
[Ph.D. Thesis]

Kraft, Susanne (2006):
Unternehmen im Umbruch : Wissen und Können im sozialen Kontext.
3230, Frankfurt am Main [u.a.], Lang, TU Darmstadt, ISBN 3-631-55795-7,
[Ph.D. Thesis]

Kounev, Samuel (2006):
Performance engineering of distributed component based systems : benchmarking, modeling and performance prediction.
Aachen, Shaker, TU Darmstadt, ISBN 3-8322-4713-0,
[Ph.D. Thesis]

Katzenbach, R. ; Astheimer, B. ; Wachter, S. ; Vogler, M. ; Seip, M. (2006):
Instandsetzung einer instabilen Tiefen Baugrube in gespanntem Grundwasser.
In: Bauingenieur, 81, pp. 511-516. [Article]

Khoa, D. T. ; Bohlen, H. G. ; Oertzen, W. von ; Bartnitzky, G. ; Blazevic, A. ; Nuoffer, F. ; Gebauer, B. ; Mittig, W. ; Rossel-Chomaz, P. (2005):
Study of refractive structure in the inelastic O-16+O-16 scattering at the incident energies of 250 to 1120 MeV.
In: Nuclear Physics A, 759, pp. 3-22. [Article]

Körner, Olaf (2005):
Vergleich mechanischer Antriebskonzepte für Drehstrom-Hochleistungslokomotiven.
In: Etz, p. 73. [Article]

Kaiser, Bruno ; Berger, Christina (2005):
Fatigue behaviour of technical springs : zum Ermüdungsverhalten technischer Federn.
In: Materialwissenschaft und Werkstofftechnik, 36, pp. 685-696. [Article]

Klug, Tina ; Henn, Regine ; Schmiede, Rudi (2005):
Büroarbeit im Wandel.
In: Bürobau-Atlas : Grundlagen, Planung, Technologie, Arbeitsplatzqualitäten / Johann Eisele; Staniek, Bettina [Hrsg.]. München : Callwey, 2005. - S. 10-19 ISBN 3-7667-1649-2, [Book Section]

Kolling, S. ; Müller, R. ; Gross, D. (2003):
The influence of elastic constants on the shape of an inclusion.
In: International Journal of Solids and Structures, 40 (17), pp. 4399-4416. Elsevier, ISSN 0020-7683,
DOI: 10.1016/S0020-7683(03)00183-5,
[Article]

Kopach, Yu. N. ; Mutterer, Manfred ; Jesinger, P. ; Kalben, J. von ; Kojouharov, I. ; Schaffner, H. ; Wollersheim, H.-J. ; Kurz, N. ; Lubkiewicz, E. ; Adrich, P. ; Sharma, H. ; Wagner, A. ; Mezentseva, Z. ; Trzaska, W. H. ; Krasznahorkay, A. ; Gönnenwein, F. (2003):
Gamma-ray spectroscopy of spontaneous ternary fission of 252 Cf.
In: GSI Scientific Report 2002 ; GSI 2003-1(2003), S. 13, [Article]

Katzenbach, Rolf (2003):
Zum 90. Geburtstag von em. Prof. Dr.-Ing. Herbert Breth.
In: Bauingenieur, 78, p. 348. [Article]

Kremer, Udo (2003):
Schraubenverbindungen : neue Ergebnisse aus Forschung und Praxis.
In: TUD intern, 24, p. 12. [Article]

Kirchner, Nina P. ; Hutter, Kolumban
Hutter, Kolumban (ed.) (2003):
Modelling particle size segregation in granular mixtures.
In: Dynamic Response of Granular and Porous Materials under Large and Catastrophic Deformations, pp. 367-391, Berlin, Springer, ISBN 3540008497,
[Book Section]

Kolling, Stefan ; Müller, Ralf ; Gross, Dietmar (2003):
A computational concept for the kinetics of defects in anisotropic materials.
In: Computational Materials Science, 26, pp. 87-94. Elsevier Science B. V., ISSN 09270256,
DOI: 10.1016/S0927-0256(02)00406-8,
[Article]

Kolling, Stefan ; Müller, Ralf ; Gross, Dietmar (2003):
A computational concept for the kinetics of defects in anisotropic materials.
In: Computational Materials Science, 26, pp. 87-94. Elsevier Science B. V., ISSN 0927-0526,
[Article]

Kosinski, W. ; Kubik, J. ; Hutter, K. (2002):
On the added mass effect for prous media.
In: Archives of mechanics, 54, pp. 479-495. [Article]

Kempe, Stephan ; Schnitzspahn, Anne ; Fahlbusch, Klaus (2002):
Die Geschichte der geologischen Institute in Darmstadt.
In: Angewandte Geowissenschaften in Darmstadt / Wilfried Rosendahl ... (Hrsg.)(Schriftenreihe der deutschen Geologischen Gesellschaft ; 15) S. 295-313., [Book Section]

Kempe, S. (2002):
Lavaröhren (Pyroducts) auf Hawai'i und ihre Genese.
In: Angewandte Geowissenschaften in Darmstadt. Wilfried Rosendahl ... (Hrsg.) Hannover : Dt. Geolog. Ges., 2002. - S. 109-127 (Schriftenreihe der Deutschen Geologischen Gesellschaft ; 15), [Article]

Knell, Heiner (2002):
Theodoros von Phokaia.
In: Der neue Pauly ; Bd. 12,1. - Stuttgart : Metzler, 2002. - S. 225, Stuttgart, Metzler, [Book Section]

Kirchner, Nina P. ; Hutter, Kolumban (2002):
Thermodynamic modelling of granular continua exhibiting quasi-static frictional behaviour with abrasion.
In: Modeling and mechanics of granular and porous materials. Eds.: Gianfranco Capriz, Vito N. Ghionna, Pasquale Giovine. - Boston[u.a.] : Birkhäuser, 2002, S. 63-83, Boston[u.a.], Birkhäuser, [Book Section]

Ktitarev, Dimitri ; Gödert, G. ; Hutter, K. (2002):
Cellular automation mdel for recrystallization and texture development in polar ice.
In: Journal of geophysical research, 107, [Article]

Kirchner, Nina P. ; Hutter, Kolumban (2002):
Elasto-plastic behaviour of a granular material with an additional scalar degree of freedom.
In: Porous media : theory, experiments and numerical applications. Eds. : Wolfgang Ehlers, Joachim Bluhm. - Berlin [u.a.]: Springer, 2002, S. 147-168, Berlin [u.a.], Springer, [Book Section]

Kolling, Stefan ; Baaser, Herbert ; Gross, Dietmar (2002):
Material forces due to crack-inclusion interaction.
In: International journal of fracture, 118, pp. 229-238. [Article]

Kissel, Robert ; Weißmantel, Heinz (2002):
Benutzerfreundliches und seniorengerechtes Design.
In: NTZ, pp. 50-52. [Article]

Kirchner, Nina P. (2001):
Thermodynamics of structured granular materials.
Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Kolling, Stefan (2001):
Zur numerischen Simulation von Morphologieänderungen in mikroheterogenen Materialien.
3, Darmstadt, Techn. Univ., Inst. für Mechanik, TU Darmstadt,
[Ph.D. Thesis]

Kolling, Stefan ; Gross, D. (2001):
Microstructural evolution of coherent precipitates.
In: Monte Carlo Simulation. Hrsg.: G.I. Schueller,P.D. Spanos. - Lisse, Tokyo: Balkema, 2001. S. 229-236, Lisse, Tokyo, Balkema, [Book Section]

Kolling, Stefan ; Gross, D. (2001):
Rafting behaviour of nickel-based superalloys.
In: Zeitschrift für angewandte Mathematik und Mechanik, 81, pp. S311-S312. [Article]

Kolling, Stefan ; Gross, D. (2001):
Simulation of microstructural evolution in materials with misfitting precipitates.
In: Probabilistic engineering mechanics, 16, pp. 313-322. [Article]

Küspert, Klaus (2000):
Kräfte im Kniegelenk bei Normal- und Fehlstellungen der Beine und Simulation chirurgischer Eingriffe.
Marburg, Tectum-Verl., TU Darmstadt,
[Ph.D. Thesis]

Kolling, Stefan ; Gross, D. (2000):
Description of two-phase materials using discrete atom method.
In: Zeitschrift für angewandte Mathematik und Mechanik, 80, pp. 385-386. [Article]

Kirchner, Nina P. (2000):
Computational aspects of the spectral Galerkin FEM for the Orr-Sommerfeld equation.
In: International journal for numerical methods in fluids, 32, pp. 119-137. [Article]

Ktitarev, D. V. ; Wolf, D. E. (1999):
A cellular automaton for grains in a rotating drum.
In: Computer physics communications, 121, pp. 303-305. [Article]

Köhler, Johannes ; Scholand, Markus (1999):
Reengineering der Belegschaftsaktie.
In: Die Bank. 1999, H. 5, S. 346-351, [Article]

Knospe, C. ; Markert, Richard ; Fittro, R. ; Hoffmann, K.-J. ; Laier, D. (1999):
Control aspects of active magnetic bearings.
In: International Federation of Automatic Control (IFAC): World Congress <14, 1999, Beijing, China>: Proceedings. S. 475-480, [Conference or Workshop Item]

Klein, Stefan (1998):
Kommunaler Handlungsspielraum zur Beeinflussung der Verkehrsmittelwahl im Personenverkehr.
Darmstadt: 1998. - Diss. v. 1998, Darmstadt, Technische Universität Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Kühn, Sebastian (1998):
Eine Theorie biologischer Wachstumsprozesse.
Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Krug von Nidda, Hans-Albrecht (1997):
Elektronenspinresonanz an elektronisch hochkorrelierten Cer-Verindungen.
Darmstadt: 1997. 135 S, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Kurtz, Thomas (1997):
Professionalisierung im Kontext sozialer Systeme: der Beruf des deutschen Gewerbelehrers.
Opladen: Westdt. Verl., 1997. 232 S., Opladen, Westdt. Verl, TU Darmstadt,
[Ph.D. Thesis]

Kühlmeyer, Lothar (1996):
Entwicklung eines Simulationsmodells zur Beschreibung der Papierfeuchtreduzierung bei der Konvektionstrocknung im Rollenoffsetdruckverfahren.
Darmstadt: 1996. X, 122 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Künzel, M. ; Laier, D. ; Markert, R. (1996):
Gekoppelte Biege- und Torsionsschwingungen rotierender Wellen.
In: Zeitschrift für Angewandte Mathematik und Mechanik: ZAMM, 76 (S5), pp. 275-276. Wiley-VCH, ISSN 0044-2267, e-ISSN 1521-4001,
DOI: 10.1002/zamm.19960761508,
[Article]

Kuessner, Martin (1995):
Finite-Elemente-Formulierungen für nichtlineare Probleme der Festkörpermechanik.
Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Kovatcheva, N. T. ; Roesner, (1995):
Investigation of secondary flows around oscillating bodies using computer algebra.
In: Zeitschrift für angewandte Mathematik und Mechanik. 75 (1995), SII, S. S535-S536, [Article]

Kühlert, Heinrich (1995):
Möglichkeiten zur Bestimmung von Frequenzgangfunktionen durch Mehrpunkterregung mit breitbandigen Signalen.
In: Internat. Scientific Colloquium CAE Techniques <2, 1995, Bielefeld>: Proceedings. Hrsg.: H. Ostholt (u.a.) S. 371-387, [Conference or Workshop Item]

Küssner, Martin ; Wriggers, P. ; Bernspang, ; Samuelson, (1995):
Mixed methods in finite element plasticity.
In: COMPLAS <4, 1995>: Proceedings. Hrsg.: R.D. Owen (u.a.), Swansea: Pineridge Pr., 1995, Swansea, Pineridge Pr, [Conference or Workshop Item]

Kühlert, Heinrich ; Markert, Richard ; Witfeld, H.
Ostholt, H. (ed.) (1995):
Möglichkeiten zur Bestimmung von Frequenzgangfunktionen durch Mehrpunkterregung mit breitbandigen Signalen.
In: International Scientific Colloquium CAE Techniques : Proceedings, pp. 371-387, Bielefeld, [Book Section]

L

Liu, Wei (2018):
Mechanically coupled isogeometric finite element simulation of lithium ion battery cell performance.
Darmstadt, TU Darmstadt, [Master Thesis]

Linker, Patrick (2016):
Black Hole Entropy and dynamics of quantum fluctuations predicted by E-gravity theory.
In: The Winnower, pp. e145934-43470. ISSN 2373-146X,
[Article]

Linker, Patrick (2016):
Foundations of E-Theory.
In: The Winnower, pp. e145350-06184. ISSN 2373-146X,
[Article]

Linker, Patrick (2016):
E-gravity theory.
In: The Winnower, (3), pp. e145441-18359. ISSN 2373-146X,
DOI: 10.15200/winn.145441.18359,
[Article]

Linker, Patrick (2015):
Nonabelian generalization of Topological Dipole Field Theory.
In: The Winnower, 2, pp. e144564-43935. ISSN 2373-146X,
[Article]

Linker, Patrick (2015):
Scattering processes predicted by Topological Dipole Field Theory.
In: The Winnower, 2, pp. e144607-74141. ISSN 2373-146X,
[Article]

Linker, Patrick (2015):
Topological Dipole Field Theory.
In: The Winnower, ISSN 2373-146X,
[Article]

Liu, Lei ; Shen, Zhigang ; Liang, Shuaishuai ; Yi, Min ; Zhang, Xiaojing ; Ma, Shulin (2014):
Enhanced atomic oxygen erosion resistance and mechanical properties of graphene/cellulose acetate composite films.
In: Journal of Applied Polymer Science, 131 (11), p. 40292. Wiley, ISSN 00218995,
[Article]

Liang, Shuaishuai ; Yi, Min ; Shen, Zhigang ; Liu, Lei ; Zhang, Xiaojing ; Ma, Shulin (2014):
One-step green synthesis of graphene nanomesh by fluid-based method.
In: RSC Advances, 4 (31), pp. 16127-16131. RSC Publishing , ISSN 2046-2069,
[Article]

Liu, Lei ; Shen, Zhigang ; Yi, Min ; Zhang, Xiaojing ; Ma, Shulin (2014):
A green, rapid and size-controlled production of high-quality graphene sheets by hydrodynamic forces.
In: RSC Advances, 4 (69), pp. 36464-36470. RSC Publishing , ISSN 2046-2069,
[Article]

Liu, Lei ; Shen, Zhigang ; Zheng, Yitin ; Yi, Min ; Zhang, Xiaojing ; Ma, Shulin (2014):
Boron nitride nanosheets with controlled size and thickness for enhancing mechanical properties and atomic oxygen erosion resistance.
In: RSC Advances, 4, pp. 37726-37732. RSC Publishing , ISSN 2046-2069,
[Article]

Liu, Lei ; Shen, Zhigang ; Liang, Shuaishuai ; Yi, Min ; Zhang, Xiaojing ; Ma, Shulin (2014):
Graphene for reducing bubble defects and enhancing mechanical properties of graphene/cellulose acetate composite films.
In: Journal of Materials Science, 49 (1), pp. 321-328. ISSN 0022-2461,
[Article]

Li, Jinzhi ; Yi, Min ; Shen, Zhigang ; Ma, Shulin ; Zhang, Xiaojing ; Xing, Yushan (2012):
Experimental study on a designed jet cavitation device for producing two-dimensional nanosheets.
In: Science China Technological Sciences, 55 (10), pp. 2815-2819. [Article]

Lukes, Sarah J. ; Lämmle, David ; Dickensheets, David L.
Schenk, Harald SPIE (eds.) (2010):
Surface micro-machined SU-8 2002 membrane mirrors for focus control.
In: Proc. SPIE 7594, MOEMS and Miniaturized Systems IX, 75940E ,
San Francisco, California, San Francisco, California, United States, 25.–27. Januar 2010, [Conference or Workshop Item]

Leder, Joachim (2008):
Ein Verfahren zur Optimierung dreidimensionaler Flugtrajektorien im Hinblick auf eine minimale Fluglärmbelastung der Bevölkerung mittels eines physiologisch geprägten Gütekriteriums.
Darmstadt: 1998. XVI,151 S, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Löw, Jürgen (2008):
Untersuchungen von Instabilitäten bei parametrischer Anregung von Kernspinwellen in MnCO3 und RbMnF3.
Darmstadt: 1996. 117 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Lindenberg, Kai (2008):
Development and Construction of the Low-Energy Photon Tagger NEPTUN.
München, Dr. Hut, TU Darmstadt, ISBN 978-3-89963-680-2 = 3-89963-680-5,
[Ph.D. Thesis]

Lichtenberg, Sören (2007):
Manipulation of Holographic Gratings using Phase-shift Keying.
Aachen, Shaker, TU Darmstadt, ISBN 978-3-8322-5993-8,
[Ph.D. Thesis]

Li, Xiangyong ; Xu, Bai-Xiang ; Wang, Min-Zhong (2006):
On the canonical elastic moduli of linear plane anisotropic elasticity.
In: Journal of Elasticity, 85 (2), pp. 107-117. Springer, ISSN 0374-3535,
[Article]

Lindahl, M. ; Sundin, E. ; Shimomura, Y. ; Sakao, T. (2006):
An Interactive Design Model for Service Engineering of Functional Sales Offers.
In: Design 2006 / D. Marjanovic, ed. Teil: 2., A. 897-904 International Design Conference <9, 2006, Dubrovnik> . - Zagreb, 2006 (Design society ; 36) ISBN: 953-6313-80-4, [Conference or Workshop Item]

Longeru, M. ; Mittelstedt, C. ; Becker, Wilfried (2005):
The boundary finite element method for the efficient computation of orders and modes of three-dimensional stress singularities.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 5, pp. 345-346. [Article]

Liebau, Nicolas ; Darlagiannis, Vasilios ; Heckmann, Oliver ; Steinmetz, Ralf (2005):
Asymmetric Incentives in Peer-to-Peer Systems.
In: Proceedings of the American Conference on Information Systms (AMCIS 2005), August 2005, [Conference or Workshop Item]

Lei, J. ; Wang, Y. S. ; Gross, Dietmar (2005):
Analysis of dynamic interaction between an inclusion and a nearby moving crack by BEM.
In: Engineering Analysis with Boundary Elements, 29, pp. 802-813. [Article]

Lévesque, M. ; Derrien, K. ; Mishnaevsky, Leon Jr. ; Baptiste, D. ; Gilchrist, M. (2004):
Mechanical behaviour predictions of nonlinear viscoelastic composite materials by a homogenisation of random mixtures approach.
In: Proceedings of the 11th European Conference on Composite Materials <11, 2004, Rhodos, Gr.>. - 2004, [Conference or Workshop Item]

Longeru, M. ; Mittelstedt, C. ; Becker, Wilfried (2004):
Thermal analysis of free-corner effects in cross-ply plates by a higher-order theory approach.
In: PAMM Proceedings in Applied Mathematics and Mechanics, 4, pp. 199-200, [Conference or Workshop Item]

Lévesque, M. ; Derrien, K. ; Mishnaevsky, Leon Jr. ; Gilchrist, M. ; Baptiste, D. (2004):
A micromechanical model for non-linear viscoelastic particle reinforced polymeric composite materials - undamaged state.
In: Composites Part A : Applied Science and Manufacturing, 35, pp. 905-913. [Article]

Luca, I. ; Fang, Chang ; Hutter, Kolumban (2004):
A thermodynamic model for turbulent motions in a granular material.
In: Continuum Mechanics and Thermodynamics, 16, pp. 363-390. [Article]

Lindemann, J. ; Becker, Wilfried (2003):
Interfacial stress concentrations near free edges and cracks by the boundary finite element method.
In: Fracture of polymers, composites, and adhesives II : this volume contains 47 peer-reviewed papers selected from those presented at the 3rd ESIS TC4 conference, "Fracture of polymers, composites and adhesives" held in Les Diablerets, Switzerland, 15 - 18th, Amsterdam [u.a.], Elsevier, [Conference or Workshop Item]

Lei, L. ; Wang, Y.-S. ; Gross, Dietmar (2003):
Dynamic interaction between a sub-interface crack and the interface in bimaterial : time-domain BEM analysis.
In: Archive of Applied Mechanics, 73, pp. 225-240. [Article]

Lindemann, J. ; Becker, Wilfried (2003):
Analyse von Spannungslokalisierungen in Mehrschichtverbunden mittels der Rand-Finite-Elemente-Methode.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 2, pp. 160-161, [Conference or Workshop Item]

Lange, St. ; Grieser, Gunter ; Jantke, Klaus P. (2003):
Advanced elementrary formal systems.
In: Theoretical Computer Science, 298, pp. 51-70. [Article]

Lier, Volker van ; Natchev, Radoslav ; Kubbat, Wolfgang (2002):
Entwicklung einer virtuellen Testumgebung zur funktionalen Performanceprüfung am digitalen Prototypen eines elektrohydraulischen Aktuators.
pp. 290-295, Rostock, ISBN 3-936150-19-2, 16. Symposium Simulationstechnik, [Conference or Workshop Item]

Langner, Gerald ; Simonis, C. ; Braun, Susanne
Jekosch, Ute (ed.) (2002):
Nachweis einer periodotopen Organisation im Lemniscus lateralis mit der 2-Deoxyglucose-Methode.
In: Fortschritte der Akustik, pp. 454-455,
Oldenburg, DEGA, Fortschritte der Akustik : DAGA '02, Bochum, ISBN 978-3-9804568-6-9,
[Conference or Workshop Item]

Lauterbach, Beate (2001):
Zur mikrorissinduzierten Schädigung spröder Materialien.
1, Darmstadt, Techn. Univ., Inst. für Mechanik, TU Darmstadt,
[Ph.D. Thesis]

Lenneweit, Gero (1999):
Experimentelle Untersuchung zum Einfluß oberflächenaktiver Substanzen auf die Stabilität eines dünnen Films auf rotierender Scheibe.
Aachen: Shaker, 1999. IV, 97 S, Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Laier, Dirk (1999):
Nichtlinearitäten magnetgelagerter Rotorsysteme.
273, Düsseldorf: VDI-Verl., 1999. XII, 86 S, Düsseldorf, VDI-Verl, TU Darmstadt,
[Ph.D. Thesis]

Lauterbach, Beate ; Gross, D. (1999):
Analysis of microcrack interaction in brittle solids.
In: Fracture and damage mechanics. Hrsg.: M.H. Aliabadi. London: Queen Mary and Westfield College, Dept. of Engineering, 1999. S. 213-222, [Book Section]

Lauterbach, Beate ; Gross, D. (1999):
Zum Mikrorißwachstum in spröden mikro-inhomogenen Materialien unter Druckbeanspruchung.
In: Tagung des DVM-Arbeitskreises Bruchvorgäng <31, 1999, Darmstadt>. Berlin: DVM, 1999. S. 277-286 (DVM-Bericht; 231), [Conference or Workshop Item]

Leuschner, Ulrike ; Paulus, Rolf ; Sauder, Gerhard (1999):
Maler-Müller-Almanach.
6, Bad Kreuznach, Ess, ISSN 0721-7277,
[Journal]

Lambert, Georg (1998):
Echtzeit-Bildverarbeitung zur Qualitätssicherung bei texturierten Oberflächen unter besonderer Berücksichtigung strukturierter Texturen.
Aachen: Shaker, 1998. X,256 S, Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Lemp, Daniel (1998):
Realisierung eines asynchronen Antriebs mit direkter Fluß- und Drehmomentregelung.
Aachen: Shaker, 1998. 138S, Aachen, Shaker, TU Darmstadt,
[Ph.D. Thesis]

Lauterbach, Beate ; Gross, D. (1998):
Crack growth in brittle solids under compression.
In: Mechanics of materials. 29 (1998), S. 81-92, [Article]

Lauterbach, Beate ; Gross, D. (1998):
On modeling of brittle solids inelastic behaviour under compression.
In: Zeitschrift für angewandte Mathematik und Mechanik. 78 (1998), Suppl. 2, S. 583-584, [Article]

Litschke, H. ; Roesner, (1998):
New experimental methods for turbulent spots and turbulent spirals in the Taylor-Couette flow.
In: Experiments in fluids. 24 (1998), S. 201-209, [Article]

Laloui, L. ; Vulliet, ; Hutter, K. (1998):
Thermodynamics of saturated and unsaturated soils.
In: Poromechanics. Hrsg.: J.-F. Thimus (u.a.) - Rotterdam: Balkema, 1998. S. 93-97, Rotterdam, Balkema, [Book Section]

Laier, Dirk ; Markert, Richard (1998):
Ein Beitrag zu sensorlosen Magnetlagern.
In: Zeitschrift für angewandte Mathematik und Mechanik. 78 (1998), Suppl. 2, S. 577-578, [Article]

Li, Keping (1997):
Mikroskopische Simulation des Verkehrsablaufs aller Verkehrsteilnehmergruppen an lichtsignalgeregelten Knotenpunkten.
Darmstadt: 1997. Getr. Zählung, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Lauterbach, Beate ; Gross, D. (1997):
Application of a boundary element method to the sliding crack model of brittle deformation.
In: Problems of environmental and damage mechanics. Hrsg.: W. Kosinski (u.a.). S. 205-215, Warszawa: Inst. Podstawowych Problemow Techniki, 1997, Warszawa, Inst. Podstawowych Problemow Techniki, [Book Section]

Laier, Dirk ; Markert, Richard ; Markert, Richard (1996):
Nonlinear oscillations of magnetically suspended rotors.
In: EUROMECH: European Nonlinear Oscillations Conference <2, 1996, Prague>: Proceedings. Vol. 1. S. 239-242, [Conference or Workshop Item]

Liu, Hong-Qiu (1996):
On a meso-elastoplastic constitutive equation with application to deformation-induced anisotropy of a polycrystalline aggregate.
In: Archives of Mechanics, 48, pp. 53-65. Institute of Fundamental Technological Research, Polish Academy of Sciences, ISSN 0373-2029,
[Article]

Lühmann, Thomas (1995):
Aufbau eines Mischkühlers zur Messung von elektrischem Widerstand und AC-Suszeptibilität und Untersuchungen an den Schwere-Fermionen-Supraleitern UNi 2Al 3 und UPd 2Al 3.
Darmstadt: 1996. 97 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Laier, Dirk ; Markert, Richard (1995):
Nichtlineare Einflüsse auf die Dynamik magnetgelagerter Rotoren.
In: Zeitschrift für angewandte Mathematik und Mechanik. 75 (1995), Sl, S. 57-58, [Article]

Laier, Dirk ; Markert, Richard (1995):
Simulation of nonlinear effects on magnetically suspended rotors.
In: International Conference on Engineering Computation and Computer Simulation <1, 1995, Changsha, China>: Proceedings. Vol. 1. S. 473-482, [Conference or Workshop Item]

M

Müller, Ralf ; Böttcher, A. ; Xu, Bai-Xiang ; Aurich, J. ; Gross, Dietmar (2010):
Driving forces on interfaces in elastic-plastic two phase materials.
In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 90 (10-11), pp. 812-820. John Wiley and Sons, ISSN 0044-2267,
DOI: 10.1002/zamm.201000051,
[Article]

Müller, Ralf ; Xu, Bai-Xiang ; Gross, Dietmar ; Lyschik, M. ; Schrade, David ; Klinkel, Sven (2010):
Deformable dielectrics - optimization of heterogeneities.
In: International Journal of Engineering Science, 48 (7-8), pp. 647-657. [Article]

Müller, Ralf ; Xu, Bai-Xiang ; Gross, Dietmar ; Lyschik, M. (2010):
Simulation of heterogeneous dielectric elastomer actuators.
In: Proc. Appl. Math. Mech., 10 (1), pp. 393-394. [Article]

Minol, Klaus (2008):
Funktionsanalyse des Alpha-Amylase-Promotors aus Aspergillus oryzae DSM 633303.
Darmstadt: 1997. IV,177 Bl, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Müller, Andreas (2008):
Zusammenhang zwischen Schallabsorption und Mikrostruktur in porösen Materialien.
Darmstadt: 1999. IV, 159 S, Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Müller, Bernhard (2008):
Zeitstandverhalten warmfester Kraftwerksstähle bei zyklischer und intermittierender Beanspruchung mit und ohne eingeschobene Druckphasen.
Darmstadt: 1996. XI, 160 S., Darmstadt, Technische Univ. Darmstadt, TU Darmstadt,
[Ph.D. Thesis]

Müller, Ralf ; Gross, Dietmar ; Schrade, David (2007):
Simulation of domain structure evolution in ferroelectric materials.
In: First Seminar on The Mechanics of Multifunctional Materials <Bad Honnef,2007> ; Proceedings of the First Seminar on The Mechanics of Multifunctional Materials ; 99-102, pp. 99-102, [Conference or Workshop Item]

Mügge, Bernd (2005):
Eisalterberechnung am Beispiel des Antarktischen Eisschildes.
Darmstadt, Technische Universität, TU Darmstadt,
[Ph.D. Thesis]

Mishnaevsky, Leon Jr. ; Gross, Dietmar (2005):
Micromechanisms and mechanics of damage and fracture in thin film/substrate systems.
In: International Applied Mechanics, 40, pp. 33-51. [Article]

Mittelstedt, C. ; Becker, Wilfried (2005):
A variational model for boundary layer effects in cross-ply laminates based on a C-0-continuous layerwise displacement formulation.
In: Journal of Composite Materials, 39, pp. 1789-1818. [Article]

Mittelstedt, C. ; Becker, Wilfried (2005):
Semi-analytical computation of 3D stress singularities in linear elasticity.
In: Communications in Numerical Methods in Engineering, 21, pp. 247-257. [Article]

Mehling, V. ; Tsakmakis, Ch. ; Gross, Dietmar (2005):
A simple fully coupled three-dimensional phenomenological model for ferroelectric ceramics.
In: Computational methods for coupled problems in science and engineering : [papers presented at Coupled Problems 2005, First International Conference on Computational Methods for Coupled Problems in Science and Engineering, held in Santorini Island, Greece f, Barcelona, Spain, International Center for Numerical Methods in Engineering (CIMNE), [Conference or Workshop Item]

Mittelstedt, C. ; Becker, Wilfried (2005):
A layerwise displacement formulation for the analysis of 3d boundary layer effects in laminated plates.
In: Proceedings of the First International Conference on Composite Science and Technology ICCST/5. - Ed. : A. Al Tamimi ... American University of Sharjah, United Arab Emirates, 1.-3.2. 2005, S. 89-94, Ed., A. Al Tamimi ... American University of Sharjah, [Conference or Workshop Item]

Mittelstedt, C. ; Becker, Wilfried (2005):
The boundary finite element method for the semi-analytical computation of 3d stress singularities in fracture mechanics.
In: International Conference on Fracture <11, 2005, Turin>.- Abstract book and proceedings (CD-Rom), [Conference or Workshop Item]

Müller, A. ; Hohe, J. ; Becker, Wilfried (2005):
On the evaluation of interfacial crack initiation by means of finite fracture mechanics.
In: International Conference on Fracture <11, 2005, Turin> . - Abstract Book and Proceedings, CD--ROM, [Conference or Workshop Item]

Mittelstedt, C. ; Becker, Wilfried (2005):
Asymptotical analysis of free-edge and free-corner effects in laminate structures.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 5, pp. 251-252. [Article]

Mittelstedt, C. ; Becker, Wilfried (2005):
Asymptotic analysis of stress singularities in composite laminates by the boundary finite element method.
In: Composite Structures, 71, pp. 210-219. [Article]

Müller, Ralf ; Gross, Dietmar
Steinmann, Paul ; Maugin, Gérard A. (eds.) (2005):
Discrete material forces in the finite element method.
In: Advances in mechanics and mathematics, In: Mechanics of material forces, pp. 105-115, New York, NY, Springer, ISBN 0-387-26260-1,
[Book Section]

Müller, Ralf (2005):
Configurational forces in defect mechanics and in computational methods.
Bd.13, Darmstadt, Inst. f. Mechanik, ISBN 3-935868-13-8,
[Habilitation]

Mittelstedt, C. ; Becker, Wilfried (2005):
Thermoelastic fields in boundary layers of isotropic laminates.
In: Journal of Applied Mechanics, 72, pp. 86-101. [Article]

Mulser, P. ; Kanapathipillai, M. ; Hoffmann, D. H. H. (2005):
Two very efficient nonlinear laser absorption mechanisms in clusters.
In: Physical Review Letters, 95, [Article]

Mishnaevsky, Leon Jr. (2005):
Automatic voxel based generation of 3D microstructural FE models and its application to the damage analysis of composites.
In: Materials Science & Engineering A, 407, pp. 11-23. [Article]

Mehling, V. ; Tsakmakis, Ch. ; Gross, Dietmar (2005):
Fully coupled 3-D modelling of ferroelectric polycrystalline material behaviour.
In: Coupled nonlinear phenomena : modeling and simulation for smart, ferroic and multiferroic materials ; March 28 - April 1, 2005, San Francisco, California, USA. - Warrendale, Pa. : Materials Research Society, 2005. - Vol. 881E, CC4.9 (Materials Research So, Warrendale, Pa., Materials Research Society, [Conference or Workshop Item]

Mishnaevsky, Leon Jr. ; Gross, Dietmar (2005):
Deformation and failure in thin films/substrate systems : methods of theoretical analysis.
In: Applied Mechanics Reviews, 58, pp. 338-353. [Article]

Mishnaevsky, Leon Jr. (2005):
Functionally graded lightweight composites : effect of the microstructure on the damage resistance.
In: Proceedings of the 4th International Conference "Numerical Analysis in Engineering" (NAE2005, 8.-9. 04. 2005, <4, 2005, Yogyakarta, Indonesia> Yogyakarta, Indonesia) (Keynote Presentation), CD-ROM, [Conference or Workshop Item]

Mishnaevsky, Leon Jr. (2005):
Computational analysis of the effects of microstructures on damage and fracture in heterogeneous materials.
In: Fracture and strength of solids VI : proceedings of the 6th International Conference on Fracture and Strength of Solids (FEOFS 2005), April 4 - 6, 2005, Bali, Indonesia / organized by Far East and Oceanic Fracture Society (FEOFS). Ed. by Ichsan Setya Putr, [Conference or Workshop Item]

Mishnaevsky, Leon Jr. (2005):
3D computational testing of microstructures of particle reinforced metal matrix composites (3168).
In: Proceedings International Conference on Fracture <11, 2005, Turin>, [Conference or Workshop Item]

Mittelstedt, C. ; Becker, Wilfried (2005):
The boundary finite element method for the identification of three-dimensinal stress singularities in linear fracture mechanics and laminate elasticity.
In: Special issue on modelling, simulation and applied optimization : [... the First International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO-05) held at ... Sharjah ... from 1 to 3 February 2005] / guest ed. Ibrahim Sadek .... - Oxf, Oxford, Pergamon, [Conference or Workshop Item]

Müller, Ralf ; Gross, Dietmar
Steinmann, Paul ; Maugin, Gérard A. (eds.) (2005):
Discrete Material Forces in the Finite Element Method.
In: Advances in Mechanics and Mathematics, 11, In: Mechanics of Material Forces : EUROMECH Colloquium on the Mechanics of Material Forces; 2003; Kaiserslautern, pp. 105-114,
Boston, MA, Springer, ISBN 978-0-387-26261-1,
DOI: 10.1007/0-387-26261-X_11,
[Conference or Workshop Item]

Müller, R. ; Gross, D. ; Maugin, G. A. (2004):
Use of material forces in adaptive finite element methods.
In: Computational Mechanics, 33 (6), pp. 421-434. ISSN 0178-7675, 1432-0924,
DOI: 10.1007/s00466-003-0543-z,
[Article]

Mueller, A. ; Hohe, J. ; Becker, Wilfried (2004):
On crack assessment at bimaterial interfaces.
In: ICTAM04 [International Congress of Theoretical and Applied Mechanics <21, 2004, Warschau>] : abstracts book and CD-Rom proceedings. - Hrsg.: W. Gutkowski ; T. A. Kowalewski. - Warschau: IPPT PAN 2004, [Conference or Workshop Item]

Mueller, A. ; Wenck, J. ; Goswami, S. ; Lindemann, J. ; Hohe, J. ; Becker, Wilfried (2004):
The boundary finite element method for predicting directions of cracks emerging from notches at bimaterial junctions.
In: Engineering fracture mechanics, 72, pp. 373-386. [Article]

Mügge, Bernd (2004):
Eisalterberechnung am Beispiel des antarktischen Eisschildes.
Darmstadt, Technische Universität, TU Darmstadt,
[Ph.D. Thesis]

Mueller, A. ; Goswami, S. ; Becker, Wilfried (2004):
Critical cracks in the vicinity of sealing joints?
In: Sixth European Solid Oxide Fuel Cell Forum, Proceedings ; 1.- Hrsg.: M. Mogensen .- Oberrohrdorf : Eureopean Cell Forum 2004. S. 339-352, [Conference or Workshop Item]

Mittelstedt, C. ; Lindemann, J. ; Becker, Wilfried (2004):
A boundary finite element method formulation for stress concentrations problems in composite laminates.
In: Proceedings CD-ROM of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics <6, 2004 Beijing, China> / Zhenhan Yao (Hrsg.). - Beijing 2004, [Conference or Workshop Item]

Mishnaevsky, Leon Jr. (2004):
Computational mesomechanics of materials : virtual testing of microstructures and possibilities of materials optimization.
In: Continuum models and discrete systems : [proceedings of the NATO Advanced Research Workshop on Continuum Models and Discrete Systems, Shoresh, Israel, 30 June - 4 July 2003] / Ed.: David J. Bergman ... - Dordrecht [u.a.] : Kluwer Acad. Publ., 2004 (NATO s, Dordrecht [u.a.], Kluwer Acad. Publ., [Conference or Workshop Item]

Mueller, A. ; Goswami, S. ; Becker, Wilfried (2004):
Detecting directions for crack nucleation at sealing joints of SOFC-stacks.
In: Sixth European Solid Oxide Fuel Cell Forum, proceedings ; 2. - Hrsg. : M. Mogensen .- Oberrohrdorf : Europen Fuel Cell Forum 2004, S. 1010-1019, Hrsg., M. Mogensen .- Oberrohrdorf : Europen Fuel Cell Forum 2004, [Conference or Workshop Item]

Mishnaevsky, Leon Jr. (2004):
3D finite element study of damage evolution in particle reinforced composite.
In: Nilsson, F. (Ed.) Proceedings from The 15th European Conference on Fracture (ECF 15), 11-13 aug., KTH, Stockholm.- 2004 [CD-ROM], [Conference or Workshop Item]

Mueller, A. ; Becker, Wilfried (2004):
A spring system to ensure electrical contact within the SOFC-stack.
In: Sixth European Solid Oxide Fuel Cell Forum, proceedings ; 2. - Hrsg.: M. Mogensen. - Oberrohrdorf : European Fuel Cell Forum, 2004, S. 813-819, Hrsg., M. Mogensen. - Oberrohrdorf : European Fuel Cell Forum, [Conference or Workshop Item]

Mishnaevsky, Leon Jr. (2004):
Computational design of bioinspired composite materials :an approach based on numerical experiments.
In: Proceedings of the 3rd MP3 (International Conference on Materials Processing for Properties and Performance).- Ed. by K.A. Khor ... .- Institute of Materials East Asia, 2004, Vol. 3 : S. 226-232, [Conference or Workshop Item]

Markert, Richard ; Seidler, Malte (2004):
Instationäres Auswuchten elastischer Turboladerrotoren : erste Untersuchungen zur Anwendbarkeit des Verfahrens ; Bericht über das Forschungsvorhaben für Schenck RoTec GmbH.
Ohne Verlag / Selbstverlag, [Book]

Mittelstedt, C. ; Becker, Wilfried (2004):
A single-layer theory approach to stress concentration phenomena in layered plates.
In: Composites Science and Technology, 64, pp. 1737-1748. [Article]

Mittelstedt, C. ; Becker, Wilfried (2004):
Interlaminar stress concentrations in layered structures: Part 1 : a selective literature survey on the free-edge effect since 1967.
In: Journal of Composite Materials, 38, pp. 1037-1062. [Article]

Mittelstedt, C. ; Becker, Wilfried (2004):
Interlaminar stress concentrations in layered structures: Part 2 : closed-form analysis of stresses at laminated rectangular wedges with arbitrary non-orthotropic layup.
In: Journal of Composite Materials, 38, pp. 1063-1090. [Article]

Mittelstedt, C. ; Becker, Wilfried (2004):
A variational finite layer technique for the investigation for the investigation of thermally induced stress concentrations in composite structures.
In: Journal of Thermal Stress, 27, pp. 953-981. [Article]

Mueller, A. ; Goswami, S. ; Hohe, J. ; Becker, Wilfried (2004):
On the assessment of cracks within the interface of thin layers on a substrate.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, pp. 288-289, [Conference or Workshop Item]

Mittelstedt, C. ; Becker, Wilfried (2004):
A hybrid variational model for the analysis of free-corner effects in layered plates.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, pp. 352-353, [Conference or Workshop Item]

Mittelstedt, C. ; Becker, Wilfried (2004):
Three-dimensional analytical and semi-analytical investigations of free-corner effects.
In: ICTAM04 [International Congress of Theoretical and Applied Mechanics <21, 2004, Warschau>] : abstracts book and CD-ROM proceedings, - Hrsg.: W. Gutkowski ; T . A. Kowalewski.- Warschau : IPPT PAN 2004, [Conference or Workshop Item]

Mishnaevsky, Leon Jr. (2004):
Three-dimensional numerical testing of microstructures of particle reinforced composites.
In: Acta Materialia, 52, pp. 4177-4188. [Article]

Mishnaevsky, Leon Jr. ; Gross, Dietmar (2004):
Strength and deformation of a thin polycrystalline film on a substrate : dislocation density analysis.
In: Advanced fracture mechanics for life and safety assessments : ECF 15, the 15th European Conference on Fracture ; August 11 - 13, 2004, KTH, Stockholm, Sweden ; proceedings. - Stockholm, 2004. - 1 CD-Rom, [Conference or Workshop Item]