Mittelstedt, C. and Becker, W. (2019):
Asymptotic analysis of free-edge and free-corner effects in laminate structures.
In: Proceedings in Applied Mathematics and Mechanics (PAMM), Wiley, pp. 251-252, 5, (1), ISSN 1617-7061,
DOI: 10.1002/pamm.200510102,
[Article]

Schnabel, J. and Mittelstedt, C. (2019):
Efficient analysis of stress concentrations in laminated composite structures with geometric discontinuities.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, Wiley, pp. 1-2, 18, (1), ISSN 1617-7061,
DOI: 10.1002/pamm.201800046,
[Article]

Großmann, A. and Mittelstedt, C. (2019):
Lightweight construction with two-dimensional cellular solids in additive manufacturing.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, Wiley, 18, (1), ISSN 1617-7061,
DOI: 10.1002/pamm.201800007,
[Article]

Katz, J. and Klimach, M. and Haupt, F. and Brechtel, A. and Mittelstedt, C. (2019):
Structural optimization and experimental investigation of CFRP lock nuts.
In: Composites Part A — Applied Science and Manufacturing, Elsevier, pp. 156-168, (117), ISSN 1359-835X,
DOI: 10.1016/j.compositesa.2018.11.004,
[Article]

Schreiber, P. and Mittelstedt, C. (2019):
Analytical buckling analysis of simply supported symmetric orthotropic thin-walled composite beams under bending load.
Lissabon, In: 5th International Conference on Mechanics of Composites (MechComp), Lissabon, 1.-4.7.2019, [Conference or Workshop Item]

Schreiber, P. and Mittelstedt, C. (2019):
Analytical solution of the critical bending load for FRP columns in terms of local stability.
Darmstadt, In: Deutscher Luft- und Raumfahrtkongress (DLRK), Darmstadt, 30.9.-2.10.2019, [Conference or Workshop Item]

Schreiber, P. and Mittelstedt, C. (2019):
Closed-form buckling analysis of simply supported orthotropic thin-walled composite laminated beams under bending load.
Hamburg, In: AST2019 - 7th International Workshop on Aircraft System Technologies, Hamburg, 19.-20.2.2019, [Conference or Workshop Item]

Li, X. and Mittelstedt, C. (2019):
Critical considerations for the design of light-weight flywheel rotors with composite materials.
Lissabon, In: 5th International Conference on Mechanics of Composites (MechComp), Lissabon, 1.-4.7.2019, [Conference or Workshop Item]

Großmann, L. and Frölich, T. and Mittelstedt, C. (2019):
Development of holistic scaling laws for melt pool characterization in laser additive manufacturing.
Pavia, In: 2nd International Conference on Simulation for Additive Manufacturing - Sim-AM 2019, Pavia, 11.-13.9.2019, [Conference or Workshop Item]

Klein, J. and Mittelstedt, C. (2019):
Experimental study on anchor bolts for load introduction into cross-sectional faces of fiber-reinforced polymer composites.
Lissabon, In: 5th International Conference on Mechanics of Composites (MechComp), Lissabon, 1.-4.7.2019, [Conference or Workshop Item]

Dahl, E. and Schürmann, H. and Mittelstedt, C. (2019):
Experimental study on resistance welding of carbon-fiber-reinforced polyamide 6 with single wire heating elements.
Lissabon, In: 5th International Conference on Mechanics of Composites (MechComp), Lissabon, 1.-4.7.2019, [Conference or Workshop Item]

Meyer, G. and Kropholler, L. and Frölich, T. and Mittelstedt, C. (2019):
Influence of the miniaturization effect on the effective stiffness of lattice struts in additive manufacturing.
Pavia, In: 2nd International Conference on Simulation for Additive Manufacturing - Sim-AM 2019, Pavia, 11.-13.9.2019, [Conference or Workshop Item]

Großmann, J. and Frölich, T. and Mittelstedt, C. (2019):
Material independent characterisation of melt pool geometry in selective laser melting.
Hamburg, In: AST2019 - International Workshop on Aircraft System Technologies, Hamburg, 19.-20.2.2019, [Conference or Workshop Item]

Jallouf, S. and Mittelstedt, C. (2019):
Mathematical and numerical model of corrugated laminates.
Lissabon, In: 5th International Conference on Mechanics of Composites (MechComp), Lissabon, 1.-4.7.2019, [Conference or Workshop Item]

Schilling, J. and Mittelstedt, C. (2019):
An approximate closed-form analytical model for the local buckling behavior of omega-stringer-stiffened composite panels.
Lissabon, In: 5th International Conference on Mechanics of Composites (MechComp), Lissabon, 1.-4.7.2019, [Conference or Workshop Item]

Schilling, J. and Mittelstedt, C. (2019):
A closed-form analytical approach to the local buckling analysis of omega-stringer-stiffened composite panels.
Hamburg, In: AST2019 - International Workshop on Aircraft System Technologies, Hamburg, 19.-20.2.2019, [Conference or Workshop Item]

Schreiber, P. and Mittelstedt, C. (2018):
A holistic approach for local buckling of composite laminated beams under compressive load.
In: Archive of Applied Mechanics, Springer, (Online first), ISSN 0939-1533,
DOI: 10.1007/s00419-018-1496-1,
[Article]

Souza, J. and Großmann, A. and Mittelstedt, C. (2018):
Micromechanical analysis of the effective properties of lattice structures in additive manufacturing.
In: Additive Manufacturing, Elsevier, pp. 53-69, (23), ISSN 2214-8604,
DOI: 10.1016/j.addma.2018.07.007,
[Article]

Hermann, J. and Kühn, T. and Mittelstedt, S. and Mittelstedt, C. (2018):
A higher order shear deformation approach to the local buckling behaviour of moderately thick composite laminated beams.
In: International Journal of Structural Stability and Dynamics, World Scientific Publishing, p. 1850139, 18, (11), ISSN 0219-4554,
[Online-Edition: https://doi.org/10.1142/S0219455418501390],
[Article]

Herrmann, J. and Kühn, T. and Mittelstedt, S. and Mittelstedt, C. (2018):
Closed-form approximate solutions for the local buckling behavior of composite laminated beams based on third-order shear deformation theory.
In: Advances in Mechanics of Materials and Structural Analysis, Springer, pp. 175-205, DOI: 10.1007/978-3-319-70563-7_8,
[Book Section]

Jallouf, S. and Mittelstedt, C. (2018):
Analytical and numerical investigation of the mechanical behavior of hybrid concrete and paper based sandwich structures.
Bologna, In: ICCS21 : 21st International Conference on Composite Structures, Bologna, 4.-7.9.2018, [Conference or Workshop Item]

Beerhorst, M. and Seibel, M. and Mittelstedt, C. (2018):
Closed-form solution for postbuckling of composite flanges.
Lissabon, In: ICTWS'18 - The Eighth International Conference on Thin-Walled Structures, Lissabon, 24.-27.2018, [Conference or Workshop Item]

Meyer, G. and Mittelstedt, C. (2018):
Cost-efficient lightweight design and performance increase of tooling machines through the implementation of fibre reinforced composite components.
Bologna, In: ICCS21 : 21st International Conference on Composite Structures, Bologna, 4.-7.9.2018, [Conference or Workshop Item]

Beerhorst, M. and Seibel, M. and Mittelstedt, C. (2018):
Efficient approximate solutions for postbuckling of axially compressed orthotropic plates with rotationally restrained and free longitudinal edges.
In: Archive of Applied Mechanics, Springer, pp. 461-476, 88, (3), ISSN 0939-1533 (Print) 1432-0681 (Online),
DOI: 10.1007/s00419-017-1319-9,
[Online-Edition: https://doi.org/10.1007/s00419-017-1319-9],
[Article]

Schreiber, P. and Mittelstedt, C. (2018):
Interactive local buckling of composite laminated beams under compressive load.
Paris, In: Proceedings of the ICCE 26: 26th International Conference on Composites/Nano Engineering, Paris, 15.-21.7.2018, [Conference or Workshop Item]

Großmann, A. and Gosmann, J. and Stumpfl, H. S. and Mittelstedt, C. (2018):
Lightweight Design and Mechanics of cellular solids in selective laser melting with AlSi10Mg.
Moskau, In: IUTAM Symposium on Mechanical design and analysis for AM technologies (AMT 2018), Moskau, 20.-25.8.2018, [Conference or Workshop Item]

Mittelstedt, S. and Mittelstedt, C. (2018):
Mixed-mode buckling of thick-walled composite beams.
Bologna, In: ICCS21 : 21st International Conference on Composite Structures, Bologna, 4.-7.9.2018, [Conference or Workshop Item]

Klein, J. and Mittelstedt, C. (2018):
On the design of anchor bolts for load introductions in continuous fiber-reinforced plastics.
Bologna, In: ICCS21 : 21st International Conference on Composite Structures, Bologna, 4.-7.9.2018, [Conference or Workshop Item]

Großmann, A. and Mittelstedt, C. (2018):
On the mechanics of lattice structures in selective laser melting.
Bologna, In: ICCS21 : 21st International Conference on Composite Structures, Bologna, 4.-7.9.2018, [Conference or Workshop Item]

Dahl, E. and Becker, J. S. and Mittelstedt, C. and Schürmann, H. (2018):
An alternative concept for pressure vessels made of fiber-reinforced thermoplastics.
Bologna, In: ICCS21 : 21st International Conference on Composite Structures, Bologna, 4.-7.9.2018, [Conference or Workshop Item]

Schnabel, J. and Yousfi, M. and Mittelstedt, C. (2017):
Free-edge effects in curved composite laminated structures with arbitrary unsymmetric layups under bending load.
In: Composite Structures, Elsevier, pp. 862-875, (180), ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2017.08.002,
[Article]

Herrmann, J. and Kühn, T. and Müllenstedt, T. and Mittelstedt, S. and Mittelstedt, C. (2017):
Local buckling of laminated composite beams based on different plate theories.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, Wiley, pp. 333-334, 17, (1), ISSN 1617-7061,
DOI: 10.1002/pamm.201710136,
[Article]

Mittelstedt, C. and Becker, Wilfried (2017):
Strukturmechanik ebener Laminate.
Darmstadt, Studienbereich Mechnik, Technische Universität Darmstadt, ISBN 978-3-935868-99-0,
[Book]

Schnabel, Jan Eike and Yousfi, Mejdi and Mittelstedt, C. (2017):
Free-edge stress fields in cylindrically curved symmetric and unsymmetric cross-ply laminates under bending load.
In: Composite Structures, pp. 862-875, 180, ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2017.08.002,
[Article]

Schnabel, J. and Mittelstedt, C. (2017):
Interlaminar stress concentrations at composite plate-doubler junctions using a layerwise analysis approach.
Paris, In: ICCS20 — 20th International Conference on Composite Structures, Paris, 4.-7.9.2017, [Conference or Workshop Item]

Herrmann, J. and Kühn, T. and Mittelstedt, S. and Mittelstedt, C. (2017):
Local buckling analysis of composite laminated beams using several laminated plate theories.
Paris, In: ICCS20 — 20th International Conference on Composite Structures, Paris, 4.-7.9.2017, [Conference or Workshop Item]

Herrmann, J. and Kühn, T. and Mittelstedt, S. and Mittelstedt, C. (2017):
Local buckling of composite laminated beams accounting for transverse shear deformations.
Stuttgart, In: SAMPE — Society for the Advancement of Material and Process Engineering — Conference, Stuttgart, 14.-16.11.2017, [Conference or Workshop Item]

Großmann, A. and Souza, J. and Mittelstedt, C. (2017):
Mechanics of cellular solids and lattices and their lightweight potential in additive manufacturing.
Stuttgart, In: Proceedings of the SAMPE — Society for the Advancement of Material and Process Engineering — Conference, Stuttgart, 14.-16.11.2017, [Conference or Workshop Item]

Schürg, M. and Scheibe, M. and Mittelstedt, C. (2016):
Anwendungsmöglichkeiten der additiven Fertigung — Entwicklung eines Kabelführungshalters im Seitenleitwerk des Airbus A350.
In: 3. NAFEMS DACH Regionalkonferenz : Berechnung und Simulation : Anwendungen-Entwicklungen-Trends : Tagungsband, Bamberg, 25.-27.4.2016, Bernau am Chiemsee, pp. 450-453, [Book Section]

Mittelstedt, C. and Becker, Wilfried (2016):
Interlaminar Stress Concentrations in Layered Structures: Part I - A Selective Literature Survey on the Free-Edge Effect since 1967.
In: Journal of Composite Materials, pp. 1037-1062, 38, (12), ISSN 0021-9983,
DOI: 10.1177/0021998304040566,
[Article]

Castro, Saullo G.P. and Mittelstedt, C. and Monteiro, Francisco A.C. and Degenhardt, Richard and Ziegmann, Gerhard (2015):
Evaluation of non-linear buckling loads of geometrically imperfect composite cylinders and cones with the Ritz method.
In: Composite Structures, Elsevier, pp. 284-299, 122, ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2014.11.050,
[Article]

Baucke, A. and Mittelstedt, C. (2015):
Explicit buckling analysis of composite laminated plates under compression taking bending-twisting-coupling into account.
In: Composite Structures, pp. 437-454, 128, ISSN 0263-8223,
[Article]

Baucke, A. and Mittelstedt, C. (2015):
Influence of bending-twisting-coupling on the buckling behavior of composite laminated plates - a new look at an old problem.
Braunschweig, In: 3rd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures, Braunschweig, 25.-27.3.2015, [Conference or Workshop Item]

Castro, S. G. P. and Mittelstedt, C. and Arbelo, M. A. and Degenhardt, R. and Khakimova, R. and Hilburger, M. (2015):
Non-linear buckling response of unstiffened laminated composite cylinders using different geometric imperfections.
Braunschweig, In: 3rd Int. Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures, Braunschweig, 25.-27.3.2015, [Conference or Workshop Item]

Castro, Saullo G.P. and Mittelstedt, C. and Monteiro, Francisco A.C. and Arbelo, Mariano A. and Degenhardt, Richard and Ziegmann, Gerhard (2015):
A semi-analytical approach for linear and non-linear analysis of unstiffened laminated composite cylinders and cones under axial, torsion and pressure loads.
In: Thin-Walled Structures, Elsevier, pp. 61-73, 90, ISSN 0263-8231,
DOI: 10.1016/j.tws.2015.01.002,
[Article]

Castro, S. and Mittelstedt, C. and Degenhardt, R. (2014):
General purpose implementation of the Ritz Method for structural analysis.
Haifa/Tel Aviv, In: 54th Israel Annual Conference on Aerospace Sciences (IACAS2014), Haifa/Tel Aviv, 19.-20.2.2014, [Conference or Workshop Item]

Castro, S. and Mittelstedt, C. and Monteiro, F. (2014):
Linear buckling predictions of unstiffened laminated composite cylinders and cones under various loading and boundary conditions using semi-analytical models.
In: Composite Structures, Elsevier, pp. 303-315, 118, ISSN 0263-8223,
[Article]

Kühn, T. and Pasternak, H. and Mittelstedt, C. and Monteiro, F. (2014):
Local buckling of shear-deformable laminated composite beams with arbitrary cross-sections using discrete plate analysis.
In: Composite Structures, Elsevier, pp. 236-248, 113, ISSN 0263-8223,
[Article]

Castro, S. and Mittelstedt, C. and Monteiro, F. A. C. and Arbelo, M. A. and Khakimova, R. and Degenhardt, R. (2014):
The Ritz method applied to the advanced single perturbation load approach for laminated composite cylinders and cones.
Braunschweig, In: European conference on spacecraft structures, materials & environmental testing, Braunschweig, 1.-4.4.2014, [Conference or Workshop Item]

Castro, S. and Mittelstedt, C. and Monteiro, F. A. C. and Arbelo, M. A. and Khakimova, R. and Degenhardt, R. (2014):
Ritz method for the analysis of unstiffened laminated composite cylinders and cones under axial compression.
Stony Brook, In: First International Conference on Mechanics of Composites (MECHCOMP2014), Stony Brook, 8.-12.6.2014, [Conference or Workshop Item]

Butzke, J. and Mittelstedt, C. (2014):
Semi-analytical modelling and analysis of the interlaminar stress fields at junctions between composite plates and doublers.
In: Composite Structures, pp. 351-366, 118, ISSN 0263-8223,
[Article]

Mittelstedt, C. (2012):
Buckling and postbuckling of thin-walled stiffened composite panels : efficient analysis methods for lightweight engineering.
[Habilitation]

Weißgraeber, Philipp and Mittelstedt, C. and Becker, Wilfried (2012):
Buckling of composite panels: A criterion for optimum stiffener design.
In: Aerospace Science and Technology 16., pp. 10-18, [Article]

Beerhorst, M. and Seibel, M. and Mittelstedt, C. (2012):
Fast analytical method describing the postbuckling behavior of long, symmetric, balanced laminated composite plates under biaxial compression and shear.
In: Composite Structures, pp. 2001-2009, 94, (6), ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2012.01.026,
[Article]

Beerhorst, M. and Seibel, M. and Mittelstedt, C. (2011):
Buckling Behavior of an Orthotropic Plate Strip Under Combined Compression and Shear.
In: Journal of Aircraft, pp. 1360-1367, 48, (4), ISSN 0021-8669,
DOI: 10.2514/1.C031284,
[Article]

Weißgraeber, Philipp and Mittelstedt, C. and Becker, Wilfried (2011):
Buckling behavior and minimum stiffness requirements of composite plates with edge reinforcements.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-34., [Article]

Baucke, A. and Mittelstedt, C. (2011):
Buckling behaviour of composite plates under uniaxial compression taking bending-twisting coupling into account.
In: LTH FL - Luftfahrttechnisches Handbuch, Abt. Faserverbund-Leichtbau, München, IASB, [Book Section]

Beerhorst, M. and Seibel, M. and Mittelstedt, C.
Altenbach, Holm and Eremeyev, Victor A. (eds.) (2011):
Closed-form approximate solution for the postbuckling behaviour of orthotropic shallow shells under axial compression.
In: Shell-like Structures — Nonclassical Theories and Applications, Berlin, Heidelberg, Springer, pp. 103-124, [Book Section]

Mittelstedt, C. and Erdmann, H. and Schröder, K.-U. (2011):
Equations facilitate analysis: an efficient closed-form postbuckling analysis method for an orthotropic laminated composite plate under shear load.
In: Composites 2011 : ECCOMAS Thematic Conference, 3rd International Conference on the Mechanical Response of Composites, Hannover, In: 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover, 21.-23.9.2011, [Conference or Workshop Item]

Kühn, T. and Pasternak, H. and Mittelstedt, C. (2011):
Explicit Local Buckling Analysis of Webs and Flanges of Composite Box-Beams accounting for Transverse Shear Deformation Effects.
Porto, In: ICCS16: 16th International Conference on Composite Structures, Porto, 28.-30.6.2011, [Conference or Workshop Item]

Beerhorst, M. and Seibel, M. and Mittelstedt, C. (2011):
Explicit local buckling analysis of stiffened composite panels under combined compression and shear accounting for stiffener-plate interaction based on a unit-cell concept.
In: Composites 2011 : ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover, In: 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover, 21.-23.9.2011, [Conference or Workshop Item]

Schröder, K.-U. and Mittelstedt, C. (2011):
Geometrically Nonlinear Approximate Solution for the Circumferential Buckling Problem in Hat-Stringer-Stiffened Composite Fuselage Panels.
In: Composites 2011 : ECCOMAS Thematic Conference, 3rd International Conference on the Mechanical Response of Composites, Hannover, In: 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover, 21.-23.9.2011, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2011):
Laminattheorien höherer Ordnung – Schubdeformationstheorie 1. Ordnung.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-31., [Article]

Mittelstedt, C. and Becker, Wilfried (2011):
Laminattheorien höherer Ordnung – Schubdeformationstheorie 3. Ordnung und lagenweise Theorien.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-32., [Article]

Kühn, T. and Pasternak, H. and Mittelstedt, C. (2011):
Local web-buckling of shear-deformable laminated composite beams using discrete plate analysis.
In: Composites 2011 : ECCOMAS Thematic Conference, 3rd International Conference on the Mechanical Response of Composites, Hannover, In: 3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites, Hannover, 21.-23.9.2011, [Conference or Workshop Item]

Weißgraeber, Philipp and Mittelstedt, C. and Becker, Wilfried (2011):
On the determination of edge reinforcement properties for optimum lightweight design of composite stiffeners.
In: Shell-like Structures — Nonclassical Theories and Applications, Series Advanced Structured Materials Vol. 15. Hrsg.: H. Altenbach und V. Eremeyev. Springer., pp. 507-516, [Article]

Mittelstedt, C. and Erdmann, Henrike and Schröder, Kai-Uwe (2011):
Postbuckling of imperfect rectangular composite plates under inplane shear closed-form approximate solutions.
In: Archive of Applied Mechanics, pp. 1409-1426, 81, (10), ISSN 0939-1533,
DOI: 10.1007/s00419-010-0491-y,
[Article]

Mittelstedt, C. and Erdmann, H. and Schröder, K.-U. (2011):
A closed-form solution for the postbuckling behaviour of composite plate strips under inplane shear load.
Porto, In: ICCS16: 16th International Conference on Composite Structures, Porto, 28.-30.6.2011, [Conference or Workshop Item]

Mittelstedt, C. and Schröder, K.-U. (2010):
Postbuckling of composite airframe structures: closed-form approximate solutions.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, Wiley, pp. 193-194, 10, ISSN 1617-7061,
DOI: 10.1002/pamm.201010089,
[Article]

Beerhorst, M. and Mittelstedt, C. and Flüh, H.-J.
Hochschule für Angewandte Wissenschaften Hamburg, Department Fahrzeugtechnik und Flugzeugbau (Corporate Creator) (2010):
Analytische Berechnungsverfahren für das Beulverhalten Omega-Stringer-versteifter Laminatplatten.
In: 75 Jahre Flugzeugbaustudium in Hamburg : 1935-2010, Mobiles, pp. 106-107, [Online-Edition: https://www.haw-hamburg.de/fileadmin/user_upload/FakTI/Dokum...],
[Book Section]

Beerhorst, M. and Seibel, M. and Mittelstedt, C. (2010):
Beulverhalten des orthotropen Plattenstreifens mit drehelastisch gelagerten unbelasteten Rändern unter kombinierter Druck- und Schubbelastung.
Hamburg, In: Deutscher Luft- und Raumfahrtkongress (DLRK), Hamburg, 31.8.-2.9.2010, [Conference or Workshop Item]

Weißgraeber, Philipp and Mittelstedt, C. and Becker, Wilfried (2010):
Buckling behavior and minimum stiffness requirements of composite plates with edge reinforcement and elastic clamping.
In: Proceedings of the 14th European Conference on Composite Materials, 7.-10. Juni 2010, Budapest, Hungary, Paper ID: 829-ECCM14. CD-ROM., [Conference or Workshop Item]

Weißgraeber, P. and Mittelstedt, C. and Becker, W. (2010):
Buckling behavior and minimum stiffness requirements of composite plates with edge reinforcment and elastic clamping.
Budapest, In: ECCM14 : 14th European Conference on Composite Materials, Budapest, 7.-10.6.2010, [Conference or Workshop Item]

Mittelstedt, C. and Beerhorst, M. and Becker, Wilfried (2010):
Buckling of omega-stringer-stiffened composite panels.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-29., [Article]

Werner, S. and Mittelstedt, C. and Becker, Wilfried (2010):
Generic buckling curves for stiffened composite plates under inplane shear load.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-28., [Article]

Mittelstedt, C. and Becker, W. (2010):
Laminattheorien höherer Ordnung - Schubdeformationstheorie 3. Ordnung und schichtweise Theorien.
In: LTH FL - Luftfahrttechnisches Handbuch, Abt. Faserverbund-Leichtbau, München, IASB, [Book Section]

Mittelstedt, C. and Becker, W. (2010):
Laminattheorien höherer Ordnung — Klassische Laminattheorie.
In: LTH FL - Luftfahrttechnisches Handbuch, Abt. Faserverbund-Leichtbau, München, IASB, [Book Section]

Mittelstedt, C. and Schröder, Kai-Uwe (2010):
Local postbuckling of hat-stringer-stiffened composite laminated plates under transverse compression.
In: Composite Structures, pp. 2830-2844, 92, (12), ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2010.04.009,
[Article]

Mittelstedt, C. and Becker, Wilfried (2010):
Lokales Beulen von Composite-Platten mit offenprofiligen Längssteifen – Platten unter Längsdruck.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-25., [Article]

Mittelstedt, C. and Schröder, Kai-Uwe (2010):
Postbuckling of compressively loaded imperfect composite plates: closed-form approximate solutions.
In: International Journal of Structural Stability and Dynamics, pp. 761-778, 10, (4), DOI: 10.1142/S0219455410003725,
[Article]

Mittelstedt, C. and Erdmann, H. and Becker, Wilfried and Schröder, K. U. (2010):
Postbuckling of imperfect laminate plates under inplane shear — closed-form approximate solutions.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-27., [Article]

Mittelstedt, C. and Schagerl, Martin (2010):
A composite view on Windenburg's problem: Buckling and minimum stiffness requirements of compressively loaded orthotropic plates with edge reinforcements.
In: International Journal of Mechanical Sciences, pp. 471-484, 52, (3), ISSN 00207403,
DOI: 10.1016/j.ijmecsci.2009.11.008,
[Article]

Mittelstedt, C. and Schagerl, M. (2010):
A composite view on Windenburg's problem: buckling and minimum stiffness requirements of orthotropic plates under uniform compression with reinforced edges.
In: International Journal of Mechanical Sciences, Elsevier, pp. 471-484, (52), ISSN 1879-2162,
[Article]

Mittelstedt, C. and Schagerl, M. (2009):
Explicit Buckling Analysis and Design Equations for Composite Plates under Compression with Free Reinforced Edges.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, Wiley, pp. 10313-10314, 8, ISSN 1617-7061,
DOI: 10.1002/pamm.200810313,
[Article]

Mittelstedt, C. and Becker, Wilfried (2009):
Beulen ausgesteifter Composite-Platten unter Druckbelastung.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-21., [Article]

Mittelstedt, C. and Becker, Wilfried (2009):
Beulen dreiseitig gelenkig gelagerter gedrückter orthotroper Platten mit Versteifung am freien Rand.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-22., [Article]

Mittelstedt, C. (2009):
Beuluntersuchungen an rechteckigen gelenkig gelagerten longitudinal ausgesteiften orthotropen Platten unter Längsdruck — Teil 1: Theorie.
In: Bauingenieur, Springer-VDI-Verlag, pp. 73-84, 84, ISSN 0005-6650,
[Article]

Mittelstedt, C. (2009):
Beuluntersuchungen an rechteckigen gelenkig gelagerten longitudinal ausgesteiften orthotropen Platten unter Längsdruck — Teil 2: Vergleichsrechnungen und Vorschlag für ein praxistaugliches Rechenverfahren.
In: Bauingenieur, Springer-VDI-Verlag, pp. 139-148, 84, ISSN 0005-6650,
[Article]

Mittelstedt, C. and Beerhorst, Matthias (2009):
Closed-form buckling analysis of compressively loaded composite plates braced by omega-stringers.
In: Composite Structures, pp. 424-435, 88, (3), ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2008.05.021,
[Article]

Becker, W. and Mittelstedt, C. (2009):
Effiziente Analysemöglichkeiten des Laminat-Randeffekts im Composite-Leichtbau.
Landshut, In: 4. Landshuter Leichtbau-Colloquium, Landshut, 26.-27.2.2009, [Conference or Workshop Item]

Mittelstedt, C. and Beerhorst, M. and Becker, Wilfried (2009):
Ein Beitrag zur Analyse des Flansch-Beulproblems dünnwandiger anisotroper Composite-Träger.
In: Bauingenieur 84,, pp. 35-45, [Article]

Mittelstedt, C. (2009):
Explicit local buckling analysis of stiffened composite plates accounting for periodic boundary conditions and stiffener--plate interaction.
In: Composite Structures, pp. 249-265, 91, (3), ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2009.04.021,
[Article]

Mittelstedt, C. and Schröder, T. (2009):
Geschlossen-analytische Behandlung des Nachbeulverhaltens von Laminatplatten.
In: Bauingenieur, Springer-VDI-Verlag, pp. 523-534, 84, ISSN 0005-6650,
[Article]

Becker, Wilfried and Mittelstedt, C. (2009):
Laminat-Randeffekte.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-16., [Article]

Mittelstedt, C. and Becker, Wilfried (2009):
Nachbeulverhalten imperfekter orthotroper Laminatplatten - Platten mit gelenkig gelagerten oder fest eingespannten unbelasteten Längsrändern unter Längsdruck.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-24., [Article]

Mittelstedt, C. and Schröder, K.-U. (2009):
Postbuckling of imperfect composite laminated plates under compression: efficient approaches for lightweight engineering.
Hamburg, In: 4th International Conference on Advances and Trends in Engineering Materials and their Applications, Hamburg, 1.-4.9.2009, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2009):
A semi-analytical discretization method for the near-field analysis of unsymmetrically laminated multimaterial junctions.
In: Composite Structures, pp. 403-411, 91, (4), ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2009.04.027,
[Article]

Mittelstedt, C. and Becker, Wilfried (2009):
A semi-analytical discretization method for the near-field analysis of unsymmetrically laminated multimaterial junctions.
In: Composite Structures 91,, pp. 403-411, [Article]

Mittelstedt, C. and Beerhorst, M. (2008):
Closed-form buckling analysis of omega-stringer-stiffened composite panels considering periodic boundary conditions.
In: Proceedings, Braunschweig, In: 2nd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures, Braunschweig, 3.-5.9.2008, [Conference or Workshop Item]

Becker, Wilfried and Mittelstedt, C. (2008):
Effiziente Analyse interlaminarer Spannungen in thermomechanisch beanspruchten Composite-Laminaten.
In: Tagungsband Deutscher Luft- und Raumfahrtkongress 2008, Darmstadt, 23.-25.9.2008, CD-ROM., [Conference or Workshop Item]

Mittelstedt, C. (2008):
Explicit analysis and design equations for buckling loads and minimum stiffness requirements of orthotropic and isotropic plates under compressive load braced by centric and eccentric longitudinal stiffeners.
In: Thin-Walled Structures, Elsevier, pp. 1409-1429, 46, ISSN 1879-3223,
[Article]

Mittelstedt, C. and Becker, Wilfried (2008):
Flansch-Beulen dünnwandiger Composite-Träger.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau,, pp. FL 33100-13, [Article]

Mittelstedt, C. and Becker, Wilfried (2008):
Reddy’s Layerwise Laminate Plate Theory for the Computation of Elastic Fields in the Vicinity of Straight Free Laminate Edges.
In: Materials Science and Engineering – A 498., pp. 76-80, [Article]

Mittelstedt, C. (2008):
Stability analysis of stiffened composite plates under combined compression and shear and identification of minimum stiffener requirements.
In: International Journal of Engineering Science, Elsevier, pp. 1011-1034, 46, ISSN 1879-2197,
[Article]

Mittelstedt, C. and Schagerl, M. (2008):
The Windenburg-problem revisited: buckling and minimum stiffness requirements for composite plates with reinforced edges.
Braunschweig, In: 2nd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures, Braunschweig, 3.-5.9.2008, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2007):
Free-edge effects in composite laminates.
In: Applied mechanical reviews, pp. 217-245, 60, [Article]

Mittelstedt, C. and Becker, Wilfried (2007):
The Pipes-Pagano-Problem revisited : elastic fields in boundary layers of plane laminated specimens under combined thermomechanical load.
In: Composite structures, pp. 373-395, 80, [Article]

Mittelstedt, C. and Becker, Wilfried (2007):
A semi-analytical discretization method for the near-field analysis of two-dimensional multimaterial wedges under plane strain conditions.
In: CD-ROM proceedings of the Sixteenth International Conference on Composite Materials, July 8 - 13, 2007, Kyoto, Japan / Edited by.: Kazuro Kageyama ...- Kyoto, 2007.- 1 CD-ROM.- MoKM1-01, [Conference or Workshop Item]

Mittelstedt, C. (2007):
Closed-form analysis of the buckling loads of symmetrically laminated orthotropic plates considering elastic edge constraints.
In: Composite Structures, Elsevier, pp. 550-558, (81), ISSN 0263-8223,
[Article]

Mittelstedt, C. (2007):
Closed-form analysis of the buckling loads of symmetrically laminated orthotropic plates considering elastic edge restraints.
In: Composite Structures, Elsevier, pp. 550-558, 81, (4), ISSN 0263-8223,
DOI: 10.1016/j.compstruct.2006.10.001,
[Article]

Mittelstedt, C. (2007):
Closed-form analysis of the buckling loads of uniaxially loaded blade-stringer-stiffened composite plates considering periodic boundary conditions.
In: Thin-Walled Structures, Elsevier, pp. 371-382, 45, (4), ISSN 0263-8231,
DOI: 10.1016/j.tws.2007.04.005,
[Article]

Mittelstedt, C. (2007):
Efficient buckling analysis of stiffened composite airframe parts.
Berlin, In: 1st CEAS European Air and Space Conference — Century Perspectives, Berlin, 10.-13.9.2006, [Conference or Workshop Item]

Mittelstedt, C. (2007):
Local buckling of wide-flange thin-walled anisotropic composite beams.
In: Archive of Applied Mechanics, Springer, pp. 439-452, 77, (7), ISSN 0939-1533,
DOI: 10.1007/s00419-006-0102-0,
[Article]

Mittelstedt, C. (2007):
Stability behaviour of arbitrarily laminated composite plates with free and elastically restrained unloaded edges.
In: International Journal of Mechanical Sciences, Elsevier, pp. 819-833, 49, (7), ISSN 1879-2162,
DOI: 10.1016/j.ijmecsci.2006.11.011,
[Article]

Mittelstedt, C. and Becker, Wilfried (2006):
Efficient Computation of order and mode of three-dimensional stress singularities in linear elasticity by the boundary finite element method.
In: International Journal of Solids and Structures, pp. 2868-2903, 43, [Article]

Mittelstedt, C. and Becker, Wilfried (2006):
Fast and reliable analysis of free-edge stress fields in a thermally loaded composite strip by a lagerwise laminate theory.
In: International Journal for Numerical Methods in Engineering, pp. 747-770, 67, [Article]

Mittelstedt, C. and Becker, W. (2006):
Fast and reliable analysis of free-edge stress fields in a thermally loaded composite strip by a layerwise laminate theory.
In: International Journal for Numerical Methods in Engineering, Wiley, pp. 747-770, (67), ISSN 0029-5981,
[Article]

Mittelstedt, C. and Becker, Wilfried (2005):
Asymptotic analysis of stress singularities in composite laminates by the boundary finite element method.
In: Composite Structures, pp. 210-219, 71, [Article]

Mittelstedt, C. and Becker, Wilfried (2005):
Asymptotical analysis of free-edge and free-corner effects in laminate structures.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, pp. 251-252, 5, [Article]

Mittelstedt, C. and Becker, Wilfried (2005):
Semi-analytical computation of 3D stress singularities in linear elasticity.
In: Communications in Numerical Methods in Engineering, pp. 247-257, 21, [Article]

Mittelstedt, C. and Becker, Wilfried (2005):
Thermoelastic fields in boundary layers of isotropic laminates.
In: Journal of Applied Mechanics, pp. 86-101, 72, [Article]

Longeru, M. and Mittelstedt, C. and Becker, Wilfried (2005):
The boundary finite element method for the efficient computation of orders and modes of three-dimensional stress singularities.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, pp. 345-346, 5, [Article]

Mittelstedt, C. and Becker, Wilfried (2005):
The boundary finite element method for the identification of three-dimensinal stress singularities in linear fracture mechanics and laminate elasticity.
Oxford, Pergamon, In: Special issue on modelling, simulation and applied optimization : [... the First International Conference on Modeling, Simulation, and Applied Optimization (ICMSAO-05) held at ... Sharjah ... from 1 to 3 February 2005] / guest ed. Ibrahim Sadek .... - Oxf, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2005):
The boundary finite element method for the semi-analytical computation of 3d stress singularities in fracture mechanics.
In: International Conference on Fracture <11, 2005, Turin>.- Abstract book and proceedings (CD-Rom), [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2005):
A layerwise displacement formulation for the analysis of 3d boundary layer effects in laminated plates.
Ed., A. Al Tamimi ... American University of Sharjah, In: Proceedings of the First International Conference on Composite Science and Technology ICCST/5. - Ed. : A. Al Tamimi ... American University of Sharjah, United Arab Emirates, 1.-3.2. 2005, S. 89-94, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2005):
A variational model for boundary layer effects in cross-ply laminates based on a C-0-continuous layerwise displacement formulation.
In: Journal of Composite Materials, pp. 1789-1818, 39, [Article]

Mittelstedt, C. and Becker, W. (2005):
Modellierung und Analyse des Laminateckeneffektes.
Siegen, In: DFG-Abschlußbericht, [Report]

Mittelstedt, C. and Becker, W. (2005):
The boundary finite element method for the identification of three-dimensional stress singularities in linear fracture mechanics and laminate elasticity.
In: Proceedings, Sharjah, In: ICMSAO'05 — 1st International Conference on Modeling, Simulation and Applied Optimization, Sharjah, 1.-3.2.2005, [Conference or Workshop Item]

Mittelstedt, C. and Becker, W. (2005):
A layerwise displacement formulation for the analysis of three-dimensional boundary layer effects in laminated plates.
Sharjah, In: ICCST/5 — 5th International Conference on Composite Science and Technology, Sharjah, 1.-3.2.2005, [Conference or Workshop Item]

Tapp, C. and Hansel, W. and Mittelstedt, C. and Becker, W. (2004):
Weight-reduction of sandwich structures by an effective topology optimization technique.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, Wiley, pp. 626-627, 4, ISSN 1617-7061,
DOI: 10.1002/pamm.200410294,
[Article]

Mittelstedt, C. and Becker, Wilfried (2004):
Interlaminar stress concentrations in layered structures: Part 1 : a selective literature survey on the free-edge effect since 1967.
In: Journal of Composite Materials, pp. 1037-1062, 38, [Article]

Mittelstedt, C. and Becker, Wilfried (2004):
Interlaminar stress concentrations in layered structures: Part 2 : closed-form analysis of stresses at laminated rectangular wedges with arbitrary non-orthotropic layup.
In: Journal of Composite Materials, pp. 1063-1090, 38, [Article]

Longeru, M. and Mittelstedt, C. and Becker, Wilfried (2004):
Thermal analysis of free-corner effects in cross-ply plates by a higher-order theory approach.
In: PAMM Proceedings in Applied Mathematics and Mechanics, 4, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2004):
Three-dimensional analytical and semi-analytical investigations of free-corner effects.
In: ICTAM04 [International Congress of Theoretical and Applied Mechanics <21, 2004, Warschau>] : abstracts book and CD-ROM proceedings, - Hrsg.: W. Gutkowski ; T . A. Kowalewski.- Warschau : IPPT PAN 2004, [Conference or Workshop Item]

Tapp, C. and Hansel, W. and Mittelstedt, C. and Becker, Wilfried (2004):
Weight-minimization of sandwich structures by a heuristic topology optimization algorithm.
In: Computer Methods in Engineering Science, pp. 563-574, 5, [Article]

Tapp, C. and Hansel, W. and Mittelstedt, C. and Becker, Wilfried (2004):
Weight-reduced of sandwich structures by an efficient topology optimization technique.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Conference or Workshop Item]

Mittelstedt, C. and Lindemann, J. and Becker, Wilfried (2004):
A boundary finite element method formulation for stress concentrations problems in composite laminates.
In: Proceedings CD-ROM of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics <6, 2004 Beijing, China> / Zhenhan Yao (Hrsg.). - Beijing 2004, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2004):
A hybrid variational model for the analysis of free-corner effects in layered plates.
In: PAMM - Proceedings in Applied Mathematics and Mechanics, 4, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2004):
A single-layer theory approach to stress concentration phenomena in layered plates.
In: Composites Science and Technology, pp. 1737-1748, 64, [Article]

Mittelstedt, C. and Becker, Wilfried (2004):
A variational finite layer technique for the investigation for the investigation of thermally induced stress concentrations in composite structures.
In: Journal of Thermal Stress, pp. 953-981, 27, [Article]

Mittelstedt, C. and Becker, W. (2004):
Die Rand-Finite-Elemente-Methode zur Identifikation von 3D-Spannungssingularitäten.
In: Book of Abstracts, Paderborn, In: 17. Workshop Composite Forschung in der Mechanik, Paderborn, 14.-15.12.2004, [Conference or Workshop Item]

Mittelstedt, C. and Hohe, Joerg and Becker, Wilfried (2003):
Analysis of thermal stresses at free corners of layered plates.
In: International congress on thermal stresses and related topics <5, 2003, Blacksburg> : Proceedings, S.MA.9.1.1-Ma.).1.4, [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2003):
Closed-form analysis of the free-corner effect in composite laminates.
In: Proceedings International Conference on Composite Science and Technology <4, 2003, Durban>. Ed. by Sarp Adali ...ICCST ; 4 (Durban) : 2003.01.21-23.- Durban, Südafrika, 2003, S. 199-204 [ISBN: 1-86840-502-8], [Conference or Workshop Item]

Mittelstedt, C. and Becker, Wilfried (2003):
Free-corner effects in cross-ply laminates : an approximate higher-order theory solution.
In: Journal of Composite Materials, pp. 2043-2068, 37, [Article]

Mittelstedt, C. and Becker, Wilfried (2003):
Three-dimensional closed-form analysis of the stress field at rectangular corners of layered plates.
In: Archive of Applied Mechanics, pp. 63-74, 73, [Article]

Mittelstedt, C. and Becker, W. (2003):
Eine Variationsformulierung für die Untersuchung von Spannungen und Verschiebungen an kräftefreien Ecken ebener Laminate basierend auf einem schichtweisen Verschiebungsansatz.
In: Book of Abstracts, Paderborn, In: 16. Workshop Composite Forschung in der Mechanik, Paderborn, 1.-3.12.2003, [Conference or Workshop Item]

Mittelstedt, C. and Brüninghoff, H. (2002):
Biegedrillknicken eines Bogenbinders aus Brettschichtholz.
In: Bautechnik, Ernst & Sohn, pp. 285-296, 79, (5), ISSN 0932-8351,
DOI: 10.1002/bate.200202070,
[Article]

Mittelstedt, C. and Becker, W. (2002):
Geschlossen-analytische Untersuchung des Spannungsfeldes an kräftefreien Ecken ebener Laminate.
In: Book of Abstracts, Berlin, In: 15. Workshop Composite Forschung in der Mechanik, Berlin, 18.-20.11.2002, [Conference or Workshop Item]

Mittelstedt, C. and Brüninghoff, H. (2002):
Zum Stand der Normung bei der Modellierung und Berechnung von fachwerkartigen Strukturen in Holzbauweise mit flächigen Knotenverbindungen bei besonderer Berücksichtigung von Nagelplattenverbindungen, Teil 2: Vergleichsrechnungen.
In: Bauen mit Holz, Bruderverlag, pp. 28-37, (1), ISSN 005-6545,
[Article]

Mittelstedt, C. and Brüninghoff, H. (2002):
Zur Biegedrillknickproblematik von Bauteilen aus Brettschichtholz am Beispiel der Spandau-Arcaden in Berlin.
In: Jahrbuch Bautechnik, Düsseldorf, VDI-Verl., pp. 201-211, [Book Section]

Mittelstedt, C. and Brüninghoff, H. (2001):
Zum Stand der Normung bei der Modellierung und Berechnung von fachwerkartigen Strukturen in Holzbauweise mit flächigen Knotenverbindungen bei besonderer Berücksichtigung von Nagelplattenverbindungen, Teil 1: Grundlagen.
In: Bauen mit Holz, Bruderverlag, pp. 30-40, (12), ISSN 005-6545,
[Article]

Mittelstedt, C. and Brüninghoff, H. (2001):
Zur Modellierung und Berechnung von fachwerkartigen Strukturen in Holzbauweise nach E DIN 1052 (05.00) bei besonderer Betrachtung von Nagelplatten als Verbindungsmittel.
In: VISION — Beiträge aus Architektur und Bauingenieurwesen / Bergische Universität, pp. 19-30, [Book Section]