TU Darmstadt / ULB / TUbiblio

Items in division

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | Item Type | Language | No Grouping
Number of items at this level: 334.

Article

Altherr, Lena C. and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas (2019):
Resilient layout, design and operation of energy-efficient water distribution networks for high-rise buildings using MINLP.
In: Optimization and Engineering, Springer US, pp. 605-645, 20, (2), ISSN 1389-4420,
DOI: 10.1007/s11081-019-09423-8,
[Online-Edition: https://doi.org/10.1007/s11081-019-09423-8],
[Article]

Bauer, Benedikt and Kohler, Michael (2019):
On deep learning as a remedy for the curse of dimensionality in nonparametric regression.
In: The Annals of Statistics, Institute of Mathematical Statistics, pp. 2261-2285, 47, (4), ISSN 0090-5364,
DOI: 10.1214/18-AOS1747,
[Article]

Kohler, Michael and Krzyzak, Adam (2019):
Estimation of extreme quantiles in a simulation model.
In: Journal of Nonparametric Statistics, pp. 393-419, 31, (2), ISSN 1048-5252,
DOI: 10.1080/10485252.2019.1567727,
[Online-Edition: https://doi.org/10.1080/10485252.2019.1567727],
[Article]

Alla, Alessandro and Hinze, Michael and Kolvenbach, Philip and Lass, Oliver and Ulbrich, Stefan (2019):
A certified model reduction approach for robust parameter optimization with PDE constraints.
In: Advances in Computational Mathematics, Springer, pp. 1-30, [Online-Edition: https://link.springer.com/article/10.1007/s10444-018-9653-1],
[Article]

Gally, Tristan and Kuttich, Anja and Pfetsch, Marc E. and Schaeffner, Maximilian and Ulbrich, Stefan (2018):
Optimal Placement of Active Bars for Buckling Control in Truss Structures under Bar Failures.
In: Applied Mechanics and Materials, Trans Tech Publications, pp. 119-130, 885, ISSN 1660-9336,
[Online-Edition: https://www.scientific.net/AMM.885.119],
[Article]

Kolvenbach, Philip and Ulbrich, Stefan and Krech, Martin and Groche, Peter (2018):
Robust Design of a Smart Structure under Manufacturing Uncertainty via Nonsmooth PDE-Constrained Optimization.
In: Applied Mechanics and Materials, Trans Tech Publications, pp. 131-144, 885, ISSN 1660-9336,
[Online-Edition: https://www.scientific.net/AMM.885.131],
[Article]

Altherr, Lena C. and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas (2018):
Algorithmic Design and Resilience Assessment of Energy Efficient High-Rise Water Supply Systems.
In: Applied Mechanics and Materials, Trans Tech Publications, pp. 211-223, 885, ISSN 1660-9336,
[Online-Edition: https://www.scientific.net/AMM.885.211],
[Article]

Altherr, Lena C. and Joggerst, Laura and Leise, Philipp and Pfetsch, Marc E. and Schmitt, Andreas and Wendt, Janine (2018):
On Obligations in the Development Process of Resilient Systems with Algorithmic Design Methods.
In: Applied Mechanics and Materials, Trans Tech Publications, pp. 240-252, 885, ISSN 1660-9336,
[Online-Edition: https://www.scientific.net/AMM.885.240],
[Article]

Altherr, Lena C. and Brötz, N. and Dietrich, Ingo and Gally, Tristan and Geßner, Felix and Kloberdanz, Hermann and Leise, Philipp and Pelz, P. F. and Schlemmer, Pia Dorothea and Schmitt, Andreas (2018):
Resilience in Mechanical Engineering - A Concept for Controlling Uncertainty during Design, Production and Usage Phase of Load-Carrying Structures.
In: Applied Mechanics and Materials, Uncertainty in Mechanical Engineering III, Trans Tech Publications, Switzerland, pp. 187-198, 885, ISSN 1662-7482,
[Online-Edition: https://www.scientific.net/AMM.885.187],
[Article]

Altherr, Lena C. and Ederer, Thorsten and Pfetsch, Marc E. and Pelz, P. F. (2018):
Maschinelles Design eines optimalen Getriebes.
In: ATZ - Automobiltechnische Zeitschrift (2018), pp. 72-77, 120, (10), DOI: 10.1007/s35148-018-0131-3,
[Online-Edition: https://link.springer.com/content/pdf/10.1007%2Fs35148-018-0...],
[Article]

Kolvenbach, Philip and Lass, Oliver and Ulbrich, Stefan (2018):
An approach for robust PDE-constrained optimization with application to shape optimization of electrical engines and of dynamic elastic structures under uncertainty.
In: Optimization and Engineering, Springer US, pp. 697-731, 19, (3), ISSN 1389-4420,
DOI: 10.1007/s11081-018-9388-3,
[Online-Edition: https://link.springer.com/article/10.1007/s11081-018-9388-3?...],
[Article]

Hedrich, P. and Lenz, Eric and Pelz, P. F. (2018):
Minimierung von Kinetose beim autonomen Fahren.
In: ATZ - Automobiltechnische Zeitschrift, pp. 70-75, 120, (7-8), DOI: 10.1007/s35148-018-0077-5,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180713_M...],
[Article]

Hedrich, P. and Lenz, Eric and Pelz, P. F. (2018):
Minimizing of Kinetosis during Autonomous Driving.
In: ATZ Woldwide, pp. 68-75, 120, (7-8), DOI: 10.1007/s38311-018-0081-0,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180713_M...],
[Article]

Lenz, Eric and Hedrich, P. and Pelz, P. F. (2018):
Aktive Luftfederung – Modellierung, Regelung und Hardware-in-the-Loop-Experimente.
In: Forschung in Ingenieurwesen, pp. 1-15, 82, (3), ISSN 0015-7899,
DOI: 10.1007/s10010-018-0272-2,
[Online-Edition: https://link.springer.com/article/10.1007/s10010-018-0272-2],
[Article]

Preuß, N. and Pelz, P. F. (2018):
Integrated Management of Experimental Research- and Meta-Data for Fan Test Rigs.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180418_I...],
[Article]

Brötz, N. and Hedrich, P. and Pelz, P. F. (2018):
Integrated Fluid Dynamic Vibration Absorber for Mobile Applications.
In: 11th International Fluid Power Conference, pp. 14-24, (1), [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180319_I...],
[Article]

Hedrich, P. and Lenz, Eric and Brötz, N. and Pelz, P. F. (2018):
Active Pneumatic Suspension for Future Autonomous Vehicles: Design, Prove of Concept and Hardware-in-the-Loop Simulations.
In: 11th International Fluid Power Conference, pp. 352-365, (3), [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180319_A...],
[Article]

Preuß, N. and Schänzle, Christian and Pelz, P. F. (2018):
Accumulators with sorbent material – an innovative approach towards size and weight reduction.
In: 11th International Fluid Power Conference, pp. 504-517, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_180319_A...],
[Article]

Kohler, Michael and Krzyzak, Adam (2018):
Adaptive Estimation of Quantiles in a Simulation Model.
In: IEEE Transactions on Infromation Theory, pp. 501-512, 64, (1), ISSN 0018-9448,
DOI: 10.1109/TIT.2017.2743177,
[Article]

Groche, Peter and Sinz, Julian and Felber, Paul (2018):
Kombinierte Wälz-Gleitlager – Anforderungsgerechter Funktionsübergang.
In: Konstruktionspraxis: Vogel Verlag, Sonderheft SH1/2018, [Article]

Götz, Benedict and Platz, Roland and Melz, Tobias (2018):
Effect of static axial loads on the lateral vibration attenuation of a beam with piezoelastic supports.
In: Smart Materials and Structures, IOP Publishing Ltd, Volume 27, (Number 3), [Article]

Kohler, Michael and Krzyzak, Adam and Mallapur, Shashidhar and Platz, Roland (2018):
Uncertainty Quantification in Case of Imperfect Models: A Non-Bayesian Approach.
In: Scandinavian Journal of Statistics, Wiley Publishing Ltd., [Article]

Bölling, Christian and Hoppe, Florian and Geßner, Felix and Knoll, Maximilian and Abele, Eberhard and Groche, Peter (2018):
Fortpflanzung von Unsicherheit in Prozessketten.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 82-88, 108, (1/2), ISSN 1436-4980,
[Article]

Schaeffner, Maximilian and Platz, Roland (2018):
Gain-scheduled H∞ buckling control of a circular beam-column subject to time-varying axial loads.
In: Smart Materials and Structures, Volume 27, (Number 6), DOI: 10.1088/1361-665X/aab63a,
[Article]

Krech, Martin and Andreas, Trunk and Groche, Peter (2018):
Controlling the sensor properties of smart structures produced by metal forming.
In: Journal of Materials Processing Technology, pp. 541-550, 262, [Article]

Mallapur, Shashidhar and Platz, Roland (2018):
Uncertainty quantification in the mathematical modelling of a suspension strut using Bayesian inference.
In: Mechanical Systems and Signal Processing, Elsevier, pp. 158-170, 118, [Article]

Gehb, Christopher Maximilian and Platz, Roland and Melz, Tobias (2018):
Two control strategies for semi-active load path redistribution in a load-bearing structure.
In: Mechanical Systems and Signal Processing, Elsevier, pp. 195-208, 118, [Article]

Geßner, Felix and Bölling, Christian (2018):
Qualität im Vergleich.
In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, pp. 47-49, 151, (6), ISSN 0043-2792,
[Article]

Abele, Eberhard and Geßner, Felix (2018):
Spanungsquerschnittmodell zum Gewindebohren.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 2-6, 108, (1/2), ISSN 1436-4980,
[Article]

Götz, Benedict and Kersting, Sebastian (2018):
Estimation of Uncertainty in the Lateral Vibration Attenuation of a Beam with Piezo-Elastic Supports by Neural Networks.
In: Applied Mechanics and Materials, pp. 293-303, 885, ISSN 1662-7482,
DOI: 10.4028/www.scientific.net/AMM.885.293,
[Article]

Schlemmer, Pia Dorothea and Kloberdanz, Hermann and Gehb, Christopher Maximilian and Kirchner, Eckhard (2018):
Adaptivity as a Property to Achieve Resilience of Load-Carrying Systems.
In: Applied Mechanics and Materials, pp. 77-87, 885, ISSN 1662-7482,
DOI: 10.4028/www.scientific.net/AMM.885.77,
[Article]

Hoppe, Florian and Knoll, Maximilian and Götz, Benedict and Schaeffner, Maximilian and Groche, Peter (2018):
Reducing Uncertainty in Shunt Damping by Model-Predictive Product Stiffness Control in a Single Point Incremental Forming Process.
In: Applied Mechanics and Materials, pp. 35-47, 885, ISSN 1662-7482,
DOI: 10.4028/www.scientific.net/AMM.885.35,
[Article]

Hedrich, P. and Brötz, N. and Pelz, P. F. (2018):
Resilient Product Development – a New Approach for Controlling Uncertainty.
In: Applied Mechanics and Materials, pp. 88-101, 885, DOI: 10.4028/www.scientific.net/AMM.885.88,
[Article]

Dietrich, Ingo and Hedrich, P. and Bölling, Christian and Brötz, N. and Geßner, Felix and Pelz, P. F. (2018):
Concept of a Resilient Process Chain to Control Uncertainty of a Hydraulic Actuator.
In: Applied Mechanics and Materials, Uncertainty in Mechanical Engineering III, Trans Tech Publications, Switzerland, pp. 156-169, 885, ISSN 1662-7482,
[Online-Edition: https://www.scientific.net/AMM.885.156],
[Article]

Bretz, Andreas and Geßner, Felix and Öztürk, Tuğrul and Rinn, Christian and Abele, Eberhard (2018):
Adjustment of Axis Offset Errors during Reaming.
In: Applied Mechanics and Materials, Trans Tech Publications, Switzerland, pp. 267-275, 885, ISSN 1662-7482,
[Online-Edition: https://www.scientific.net/AMM.885.267],
[Article]

Preuß, N. and Staudter, G. and Weber, M. and Anderl, R. and Pelz, P. F. (2018):
Methods and Technologies for Research- and Metadata Management in Collaborative Experimental Research.
In: Applied Mechanics and Materials, pp. 170-183, 885, DOI: 10.4028/www.scientific.net/AMM.885.170,
[Article]

Bölling, Christian and Abele, Eberhard (2018):
Simulation of Multi-Stage Fine Machining Processes at the Example of Valve Guide and Valve Seat.
In: Applied Mechanics and Materials, Uncertainty in Mechanical Engineering III, Trans Tech Publications, Switzerland, pp. 255-266, 885, ISSN 1662-7482,
[Online-Edition: https://www.scientific.net/AMM.885.255],
[Article]

Leise, Philipp and Altherr, Lena C. and Pelz, P. F. (2017):
Energy-Efficient Design of a Water Supply System for Skyscrapers by Mixed-Integer Nonlinear Programming.
In: Operations Research Proceedings 2017: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Springer, [Article]

Hojny, Christoper and Pfetsch, Marc E. and Schmitt, Andreas (2017):
Extended Formulations for Column Constrained Orbitopes.
In: Operations Research Proceedings 2017: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Springer, [Article]

Bauer, Benedikt and Heimrich, Felix and Kohler, Michael and Krzyzak, Adam (2017):
On estimation of surrogate models for multivariate computer experiments.
In: Annals of the Institute of Statistical Mathematics, Springer, 69, ISSN 1572-9052,
[Online-Edition: Http://10.1007/s10463-017-0627-8],
[Article]

Lass, Oliver and Ulbrich, Stefan (2017):
Model Order Reduction Techniques with a Posteriori Error Control for Nonlinear Robust Optimization Governed by Partial Differential Equations.
In: SIAM Journal on Scientific Computing, SIAM, pp. 112-139, 39, (5), ISSN 1064-8275,
DOI: 10.1137/16m108269x,
[Online-Edition: http://epubs.siam.org/doi/abs/10.1137/16M108269X],
[Article]

Oberle, Marius and Helfert, Marlene and König, Christina and Bruder, Ralph (2017):
Experimentelle Untersuchung des menschlichen Einflusses auf die Unsicherheit in der Mensch-Technik-Interaktion.
In: Zeitschrift für Arbeitswissenschaft, pp. 1-12, [Online-Edition: https://link.springer.com/content/pdf/10.1007/s41449-017-007...],
[Article]

Hedrich, P. and Pelz, P. F. and Lenz, Eric (2017):
Modellbildung, Regelung und experimentelle Untersuchung einer aktiven Luftfederung in einer Hardware-in-the-Loop-Simulationsumgebung.
In: VDI-Berichte 2295, pp. 447-460, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_171010_M...],
[Article]

Schiereck, Dirk and Wendt, Janine (2017):
Aktienmarktreaktionen auf Rückrufankündigungen über RAPEX-Listen.
In: Der Betrieb, Fachverlage der Verlagsgruppe Handelsblatt (Düsseldorf), pp. 1923-1926, 2017, (34), ISSN 0005-9935,
[Article]

Bauer, Benedikt and Devroye, Luc and Kohler, Michael and Krzyzak, Adam and Walk, Harro (2017):
Nonparametric estimation of a function from noiseless observations at random points.
In: Journal of Multivariate Analysis, [Article]

Ulbrich, Michael and Ulbrich, Stefan and Bratzke, Daniela (2017):
A Multigrid Semismooth Newton Method for Semilinear Contact Problems.
In: Journal of Computational Mathematics, Global Science Press, pp. 486-528, 35, (4), [Online-Edition: http://www.global-sci.org/jcm/readabs.php?vol=35&no=4&page=4...],
[Article]

Schänzle, Christian and Dietrich, Ingo and Corneli, T. and Pelz, P. F. (2017):
Controlling Uncertainty in Hydraulic Drive Systems by means of a Soft Sensor Network.
In: Sensors and Instrumentation, Proceedings of the 35th IMAC, (Volume 5), [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_1601026_...],
[Article]

Altherr, Lena C. and Pelz, P. F. and Ederer, Thorsten and Pfetsch, Marc E.
Optimale Getriebe auf Knopfdruck: Gemischt-ganzzahlige nichtlineare Optimierung zur Entscheidungsunterstützung bei der Auslegung von Getrieben für Kraftfahrzeuge.
In: Tagungsband Antriebstechnisches Kolloquium ATK 2017, [Article]

Kohler, Michael and Krzyzak, Adam (2017):
Nonparametric Regression Based on Hierarchical Interaction Models.
In: IEEE Transactions on Information Theory, pp. 1620-1630, 63, (3), [Article]

Pelz, P. F. and Groß, T. F. and Schänzle, C. (2017):
Hydrospeicher mit Sorbentien - Verhalten, Modellierung und Diskussion.
In: O+P – Ölhydraulik und Pneumatik 1-2, pp. 42-49, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_170116_H...],
[Article]

Iapichino, L. and Ulbrich, S. and Volkwein, S. (2017):
Multiobjective PDE-constrained optimization using the reduced-basis method.
In: Advances in Computational Mathematics, Springer, pp. 945-972, 43, (5), ISSN 1019-7168,
DOI: 10.1007/s10444-016-9512-x,
[Online-Edition: https://doi.org/10.1007/s10444-016-9512-x],
[Article]

Groche, Peter and Krech, Martin (2017):
Efficient production of sensory machine elements by a two-stage rotary swaging process—Relevant phenomena and numerical modelling.
In: Journal of Materials Processing Technology, Elsevier, pp. 205-217, 242, ISSN 0924-0136,
[Online-Edition: http://dx.doi.org/10.1016/j.jmatprotec.2016.11.034],
[Article]

Altherr, Lena C. and Dörig, B. and Ederer, Thorsten and Pelz, P. F. and Pfetsch, Marc E. and Wolf, Jan (2017):
A Mixed-Integer Nonlinear Program for the Design of Gearboxes.
In: Operations Research Proceedings 2016: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Springer, [Article]

Abele, Eberhard and Bretz, Andreas (2017):
Werkzeugverlagerung beim Reiben - Entwicklung sensorischer Werkzeuge zur Erkennung von Prozessstörungen.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 21-26, 107, (1-2), ISSN 1436-4980,
[Article]

Groche, Peter and Hoppe, Florian and Sinz, Julian (2017):
Stiffness of multipoint servo presses: Mechanics vs. control.
In: CIRP Annals - Manufacturing Technology, Elsevier, Manchester, pp. 373-376, 66, DOI: 10.1016/j.cirp.2017.04.053,
[Article]

Bölling, Christian and Kuhne, Milla and Abele, Eberhard (2017):
Modeling of Process Forces with Consideration of Tool Wear for Machining of Sintered Steel Alloy for Application to Valve Seat in a Combustion Engine.
In: Production Engineering : WGP, Springer Verlag, Heidelberg, pp. 477-485, 11, (4-5), ISSN 0944-6524,
DOI: 10.1007/s11740-017-0759-y,
[Article]

Bölling, Christian and Hacker, Michael and Abele, Eberhard (2017):
Pulvermetallurgische Stahlllegierungen für Ventilsitze.
In: Werkstatt + Betrieb : WB, Carl Hanser Verlag, München, pp. 31-34, 150, (5), ISSN 0043-2792,
[Article]

Li, Sushan and Platz, Roland (2017):
Observations by Evaluating the Uncertainty of Stress Distribution in Truss Structures Based on Probabilistic and Possibilistic Methods.
In: Journal of Verification, Validation and Uncertainty Quantification, pp. 1-9, Vol. 2, (Issue 3), [Article]

Enss, Georg Christoph and Kohler, Michael and Krzyzak, Adam and Platz, Roland (2016):
Nonparametric quantile estimation based on surrogate models.
In: IEEE Transaction on Information Theory, pp. 5727 -5739, [Article]

Bott, Ann-Kathrin and Felber, Tina and Kohler, Michael and Kristl, Lisa (2016):
Estimation of a time-dependent density.
In: Journal of Statistical Planning and Inference, pp. 81-107, [Article]

Utz, M. and Hedrich, P. and Pelz, P. F. (2016):
Computing an Operating Strategy for an Active Body Control with Dynamic Programming in the Automotive Area.
In: ECCOMAS Congress 2016 - VII European Congress on Computational Methods in Applied Sciences a nd Engineering, [Online-Edition: https://www.eccomas2016.org/proceedings/pdf/6920.pdf],
[Article]

Heimrich, Felix and Anderl, Reiner (2016):
Approach for the Visualization of Geometric Uncertainty of Assemblies in CAD-Systems.
In: Journal of Computers, pp. 247-257, 11, (3), ISSN 1796-203X,
[Article]

Freund, Tillmann and Lotz, Julian and Würtenberger, Jan and Kloberdanz, Hermann (2016):
Applying the elemental inferfaces approach to kinematic design.
In: Proceedings of the 14th International Design Conference - DESIGN 2016, pp. 193-200, (1), [Article]

Lotz, Julian and Freund, Tillmann and Würtenberger, Jan and Kloberdanz, Hermann (2016):
Uncertainty in Size Range Development - an Analysis of Potential for a new Scaling Approach.
In: Proceedings of the International Design Conference - Design 2016, pp. 341-350, 1, [Article]

Gally, Tristan and Pfetsch, Marc E. (2016):
Computing Restricted Isometry Constants via Mixed-Integer Semidefinite Programming.
In: Optimization Online, [Online-Edition: http://www.optimization-online.org/DB_HTML/2016/04/5395.html],
[Article]

Gally, Tristan and Pfetsch, Marc E. and Ulbrich, Stefan (2016):
A Framework for Solving Mixed-Integer Semidefinite Programs.
In: Optimization Methods and Software, pp. 594-632, 33, (3), [Online-Edition: http://dx.doi.org/10.1080/10556788.2017.1322081],
[Article]

Vergé, Angela and Pöttgen, Philipp and Altherr, Lena C. and Ederer, Thorsten and Pelz, P. F. (2016):
Lebensdauer als Optimierungsziel - Algorithmische Struktursynthese am Beispiel eines hydrostatischen Getriebes.
In: O+P – Ölhydraulik und Pneumatik, pp. 114-121, 60, (1-2), [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/article_160111...],
[Article]

Hedrich, P. and Johe, M. and Pelz, P. F. (2016):
Design and realization of an adjustable fluid powered piston for an active air spring.
In: 10th International Fluid Power Conference, Dresden, Germany, pp. 571-582, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/minute_160309_...],
[Article]

Platz, Roland and Enss, Georg Christoph (2016):
Evaluation of uncertainty in experimental active buckling control of a slender beam-column using Weibull analysis.
In: Mechanical Systems and Signal Processing, ISSN 0888-3270,
[Article]

Altherr, Lena C. and Ederer, Thorsten and Lorenz, Ulf and Pelz, P. F. and Pöttgen, Philipp (2016):
Experimental Validation of an Enhanced System Synthesis Approach.
In: Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Springer, XIV, (1), ISSN 0721-5924,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_150203_E...],
[Article]

Groche, Peter and Wohletz, Simon and Mann, Arne and Krech, Martin and Monnerjahn, Vinzent (2016):
Conjoint forming - technologies for simultaneous forming and joining.
In: IOP Conference Series: Materials Science and Engineering, pp. 012025-12038, 119, ISSN 1757-8981,
[Online-Edition: http://dx.doi.org/10.1088/1757-899X/119/1/012025],
[Article]

Schaeffner, Maximilian and Götz, Benedict and Platz, Roland (2016):
Active buckling control of a beam-column with circular cross-section using piezo-elastic supports and integral LQR control.
In: Smart Materials and Structures, Volume 25, [Article]

Götz, Benedict and Schaeffner, Maximilian and Platz, Roland and Melz, Tobias (2016):
Lateral vibration attenuation of a beam with circular cross-section by a support with integrated piezoelectric transducers shunted to negative capacitances.
In: Smart Materials and Structures, Volume 25, (095045), [Article]

Groche, Peter and Hoppe, Florian and Hesse, Daniel and Calmano, Stefan (2016):
Blanking-bending process chain with disturbance feed-forward and closed-loop control.
In: Journal of Manufacturing Processes, pp. 64-70, 24, [Article]

Gehb, Christopher Maximilian and Platz, Roland and Melz, Tobias (2016):
Active load path adaption in a simple kinematic load-bearing structure due to stiffness change in the structure’s supports.
In: Journal of Physics, Vol. 744, (012168, (12p)), [Article]

Schaeffner, Maximilian and Platz, Roland (2016):
Active buckling control of an imperfect beam-column with circular cross-section using piezoelastic supports and integral LQR control.
In: Journal of Physics, Vol. 744, (012165, (12p)), [Article]

Pöttgen, Philipp and Ederer, Thorsten and Altherr, Lena C. and Lorenz, Ulf and Pelz, P. F. (2015):
Examination and Optimization of a Heating Circuit for Energy-Efficient Buildings.
In: Energy Technology, WILEY-VCH Verlag, pp. 136-144, Vol. 4, ISSN 2194-4296,
[Online-Edition: http://dx.doi.org/10.1002/ente.201500252],
[Article]

Zocholl, Maximilian and Heimrich, Felix and Oberle, Marius and Würtenberger, Jan and Bruder, Ralph and Anderl, Reiner (2015):
Representation of Human Behaviour for the Visualization in Assembly Design.
In: Applied Mechanics and Materials, Trans Tech Publications, Switzerland, pp. 183-192, 807, ISSN 1660-9336,
[Article]

Hedrich, P. and Cloos, F.-J. and Würtenberger, Jan and Pelz, P. F. (2015):
Comparison of a New Passive and Active Technology for Vibration Reduction of a Vehicle Under Uncertain Load.
In: Applied Mechanics and Materials, Trans Tech Publications, Switzerland, pp. 57-66, 807, ISSN 1660-9336,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_151119_s...],
[Article]

Vergé, Angela and Lotz, Julian and Kloberdanz, Hermann and Pelz, P. F. (2015):
Uncertainty Scaling – Motivation, Method and Example Application to a Load Carrying Structure.
In: Applied Mechanics and Materials, pp. 99-108, 807, ISSN 1660-9336,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_151119_s...],
[Article]

Pöttgen, Philipp and Ederer, Thorsten and Altherr, Lena C. and Pelz, P. F. (2015):
Developing a Control Strategy for Booster Stations under Uncertain Load.
In: Applied Mechanics and Materials, Trans Tech Publications, Switzerland, pp. 241-246, 807, ISSN 1660-9336,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_151123_S...],
[Article]

Gally, Tristan and Gehb, Christopher Maximilian and Kolvenbach, Philip and Kuttich, Anja and Pfetsch, Marc E. and Ulbrich, Stefan (2015):
Robust Truss Topology Design with Beam Elements via Mixed Integer Nonlinear Semidefinite Programming.
In: Applied Mechanics and Materials, Trans Tech Publications, Switzerland, pp. 229-238, 807, ISSN 1660-9336,
[Online-Edition: http://www.scientific.net/AMM.807.229],
[Article]

Schmitt, Sebastian O. and Scheitza, Matthias and Groche, Peter (2015):
A model for improving the applicability of design methodologies to mechanical engineering design routines.
In: Journal of Engineering Design, pp. 302-320, 26 Issue 10-12, ISSN 0954-4828 (print) 1466-1837 (online),
[Article]

Altherr, Lena C. and Ederer, Thorsten and Schänzle, Christian and Lorenz, Ulf and Pelz, P. F. (2015):
Algorithmic System Design Using Scaling and Affinity Laws [accepted].
In: Operations Research Proceedings 2015: Selected Papers of the International Conference on Operations Research, Springer, [Article]

Pelz, P. F. and Cloos, F.-J. and Corneli, T. and Hedrich, P. and Nakhjiri, M. (2015):
Leichtbautilger für Fahrwerke.
In: 3. VDI-Fachtagung Schwingungsdämpfung, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/article_150922...],
[Article]

Hedrich, P. and Pelz, P. F. and Nakhjiri, M. and Fäth, S. and Dehlwes, S. (2015):
Luftdämpfung als zukunftsweisende Technologie im Nutzfahrzeugbereich – Optimale Auslegung eines Luftfederdämpfers.
In: 3. VDI-Fachtagung Schwingungsdämpfung, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/article_150922...],
[Article]

Felber, Tina and Kohler, Michael and Krzyzak, Adam (2015):
Adaptive Density Estimation From Data With Small Measurement Errors.
In: IEEE Transactions on Infromation Theory, pp. 3446-3456, 61, (6), [Article]

Freund, Tillmann and Kloberdanz, Hermann and Lotz, Julian and Würtenberger, Jan (2015):
AN APPROACH TO ANALYSING INTERFACE UNCERTAINTY USING THE CONTACT AND CHANNEL MODEL.
In: Proceedings of the 20th International Conference on Engineering Design (ICED15), pp. 53-63, 6, [Article]

Schänzle, Christian and Altherr, Lena C. and Ederer, Thorsten and Lorenz, U. and Pelz, P. F. (2015):
As Good As It Can Be - Ventilation System Design By A Combined Scaling And Discrete Optimization Method.
In: Proceedings of FAN 2015, Lyon (France), 15 – 17 April 2015, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_150420_T...],
[Article]

Felber, Tina and Kohler, Michael and Krzyzak, Adam (2015):
Adaptive density estimation based on real and artificial data.
In: Journal of Nonparametric Statistics, pp. 1-18, 27, [Article]

Groche, Peter and Calmano, Stefan and Felber, Tina and Schmitt, Sebastian O. (2015):
Statistical analysis of a model based product property control for sheet bending.
In: Production Engineering Research and Development, pp. 25-34, 9, [Article]

Götz, Benedict and Schaeffner, Maximilian and Platz, Roland and Melz, Tobias (2015):
Model verification and validation of a piezo-elastic support for passive and active structural control of beams with circular cross-section.
In: Applied Mechanics and Materials, pp. 67-77, 807, [Article]

Calmano, Stefan and Hesse, Daniel and Hoppe, Florian and Sinz, Julian and Groche, Peter and Traidl, Philipp (2015):
Orbital forming of flange parts under uncertainty.
In: Applied Mechanics and Materials, Trans Tech Publications, Switzerland, pp. 121-129, 807, [Article]

Bott, Ann-Kathrin and Felber, Tina and Kohler, Michael (2015):
Estimation of a density in a simulation model.
In: Journal of Nonparametric Statistics, pp. 271-285, 27, (3), [Article]

Abele, Eberhard and Bölling, Christian (2015):
Simulation der Ventilsitzbearbeitung am Zylinderkopf.
In: VDI-Z Integrierte Produktion, Springer VDI Verlag, Düsseldorf, pp. 59-63, 157, (I), ISSN 0042-1766,
[Article]

Bölling, Christian and Güth, Sebastian and Abele, Eberhard (2015):
Control of Uncertainty in High Precision Cutting Processes: Reaming of Valve Guides in a Cylinder Head of a Combustion Engine.
In: Proceedings of the 2nd International Conference on Uncertainty in Mechanical Engineering II, November 19th–20th, 2015, Darmstadt, Trans Tech Publications, Switzerland, pp. 153-161, 807 of Applied Mechanics, ISSN 1660-9336,
[Article]

Güth, Sebastian and Bretz, Andreas and Bölling, Christian and Baron, Andreas and Abele, Eberhard (2015):
Control of Uncertainty Based on Machining Strategies During Reaming.
In: Proceedings of the 2nd International Conference on Uncertainty in Mechanical Engineering II, November 19th–20th, 2015, Darmstadt, Trans Tech Publications, Switzerland, pp. 162-168, 807 of Applied Mechanics, ISSN 1660-9336,
[Article]

Enss, Georg Christoph and Götz, Benedict and Kohler, Michael and Krzyzak, Adam and Platz, Roland (2014):
Nonparametric estimation of a maximum of quantiles.
In: Electronic Journal of Statistics, pp. 3176-3192, 8, ISSN 1935-7524,
[Article]

Kohler, Michael (2014):
Optimal global rates of convergence for noiseless regression estimation problems with adaptively chosen design.
In: Journal of Multivariate Analysis, pp. 197-208, (132), [Article]

Ederer, Thorsten and Lorenz, Ulf and Opfer, Thomas and Wolf, Jan (2014):
Multistage Optimization with the Help of Quantified Linear Programming.
In: Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Springer, pp. 369-375, XIV, (1), ISSN 0721-5924,
[Article]

Ederer, Thorsten and Lorenz, Ulf and Opfer, Thomas (2014):
Quantified Combinatorial Optimization.
In: Operations Research Proceedings 2013, Springer International Publishing, pp. 121-128, ISSN 0721-5924,
[Online-Edition: http://link.springer.com/chapter/10.1007/978-3-319-07001-8_1...],
[Article]

Pelz, P. F. and Vergé, Angela (2014):
Validated Biomechanical Model for Efficiency and Speed of Rowing.
In: Journal of Biomechanics, Elsevier, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_141116_v...],
[Article]

Bedarff, T. and Hedrich, P. and Pelz, P. F. (2014):
Design of an Active Air Spring Damper.
In: 9.IFK – Proceedings Vol.3, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_140426_D...],
[Article]

Dörig, B. and Ederer, Thorsten and Hedrich, P. and Lorenz, U. and Pelz, P. F. and Pöttgen, Philipp (2014):
Technical Operations Research (TOR) Exemplified by a Hydrostatic Power Transmission System.
In: 9.IFK – Proceedings Vol.1, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_140424_T...],
[Article]

Groche, Peter and Brenneis, Matthias (2014):
Manufacturing and use of novel sensoric fasteners for monitoring forming processes.
In: Measurement, pp. 136 - 144, 53, [Online-Edition: http://www.sciencedirect.com/science/article/pii/S0263224114...],
[Article]

Groche, Peter and Wohletz, Simon and Brenneis, Matthias and Pabst, Christian and Resch, Franziska (2014):
Joining by forming - A review on joint mechanisms, applications and future trends.
In: Journal of Materials Processing Technology, pp. 1972-1994, 214, (214), [Article]

Kohler, Michael and Krzyzak, Adam and Walk, Harro (2014):
Nonparametric recursive quantile estimation.
In: Statistics and Probability Letters, pp. 102-107, 93, [Article]

Groche, Peter and Heß, Benjamin (2014):
Friction control for accurate cold forged parts.
In: CIRP Annals - Manufacturing Technology, Elsevier, Manchester, pp. 285-288, 63, [Article]

Brenneis, Matthias and Groche, Peter (2014):
Integration of Piezoceramic Tube under Prestress into a Load Carrying Structure.
In: Advanced Materials Research, Trans Tech Publications, pp. 651-658, vols 966-967, [Article]

McBain, Gabriel and Wohlmuth, Michael and Calmano, Stefan and Stahlmann, Jörg (2014):
Mit Industrie 4.0 wenig zu tun?
In: UMFORMtechnik, pp. 40-43, 4, [Article]

Schiela, Anton and Ulbrich, Stefan (2014):
OPERATOR PRECONDITIONING FOR A CLASS OF INEQUALITY CONSTRAINED OPTIMAL CONTROL PROBLEMS.
In: Siam Journal on Optimization, pp. 435-466, 24, (1), ISSN 1052-6234,
[Article]

Abele, Eberhard and Bölling, Christian (2014):
Modellierung der geometrischen Eingriffsbedingungen bei der Ventilsitzbearbeitung am Zylinderkopf.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 735-740, 104, (11/12), ISSN 1436-4980,
[Article]

Heep, Thomas and Güth, Sebastian and Leong, Arnold (2014):
Derivation of Recommendations for the Manufacturing of High-Speed Reaming Tools.
In: Proceedings of the 11th International Conference on High Speed Machining, Prague (Czech Republic) ISBN 978-80-904077-7-0, [Article]

Habermehl, Kai and Ulbrich, Stefan (2013):
Achilles High Heel - Mach einen Schuh draus!
In: Mitteilung der Deutschen Mathematiker Vereinigung (DMV), Walter de Gruyter GmbH & Co. KG, pp. 79-83, 21, (2), ISSN (Online) 0942-5977 (Print) 0947-4471,
[Online-Edition: http://www.degruyter.com/view/j/dmvm.2013.21.issue-00002/dmv...],
[Article]

Devroye, Luc and Felber, Tina and Kohler, Michael (2013):
Estimation of a density using real and artificial data.
In: IEEE Transactions on Information Theory, pp. 1917-1928, 59, [Article]

Scheitza, Matthias and Schmitt, Sebastian O. and Emde, Stefan (2013):
Potential and challenges of combined roller and plain bearings for servo presses.
In: Advanced Materials Research, pp. 285-292, 769, [Article]

Hauer, Thomas and Haydn, Michael and Abele, Eberhard (2013):
Influence of a Diagonal Pre-Drilled Hole on Hole Quality During the Reaming Process Using Multiblade Tools.
In: Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp. 569-573, 34, Special Issue, ISSN 1678-5878,
[Article]

Hauer, Thomas and Abele, Eberhard (2013):
Feinbearbeitung von Sinterstählen.
In: Diamond Business, diamond business KG, Eltmann, pp. 22-27, (45), ISSN 1619-5558,
[Article]

Abele, Eberhard and Hauer, Thomas and Schützer, Klaus and Roth, Michael (2013):
Qualität mehrschneidig geriebener Bohrungen.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 893-898, 103, (11/12), [Article]

Enss, Georg Christoph and Platz, Roland and Hanselka, Holger (2012):
Uncertainty in loading and control of an active column critical to buckling.
In: Shock and Vibration, IOS Press, pp. 929-937, 19, (5), [Article]

Birkhofer, Hermann and Engelhardt, Roland and Kästle, Christoph (2012):
Unsicherheitsanalyse eines Wärmetauschers anhand der UMEA-Methodik.
In: Konstruktion, pp. 69-70, 107, (7-8), [Article]

Brenneis, Matthias and Ibis, Mesut and Duschka, Alexander and Groche, Peter (2012):
Towards Mass Production of Smart Products by Forming Technologies.
In: Production Engineering, Springer, [Article]

Bedarff, T. and Pelz, P. F. (2012):
Development of an active and integrated suspension system.
In: 8th International Fluid Power Conference, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_120111_8...],
[Article]

Hess, Wolfgang and Ulbrich, Stefan (2012):
An inexact ℓ1 penalty SQP algorithm for PDE-constrained optimization with an application to shape optimization in linear elasticity.
In: Optimization Methods and Software, [Article]

Brenneis, Matthias and Groche, Peter (2012):
Smart components through rotary swaging.
In: Key Engineering Materials; 504-506, pp. 723-728, [Article]

Abele, Eberhard and Haydn, Michael and Hauer, Thomas (2012):
Beurteilung von Unsicherheit während der Bohrungsfeinbearbeitung - Aufbau eines Modells zur Überwachung und Beurteilung von Unsicherheiten im Reibprozess.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 410-415, 102, (6), ISSN 1436-4980,
[Article]

Hauer, Thomas and Abele, Eberhard (2012):
Steigerung der Bohrungsqualität beim Reiben mit mehrschneidigen Werkzeugen am Beispiel der Ventilführungsbearbeitung.
In: Diamond Business, diamond business KG, Eltmann, pp. 42-48, (43), ISSN 16195558,
[Article]

Schmitt, Sebastian O. and Avemann, Jörg and Groche, Peter (2012):
Development of manufacturing process chains considering uncertainty.
In: Enabling Manufacturing Competitiveness and Economic Sustainability, pp. 111-116, 2, [Article]

Groche, Peter and Kraft, Matthias and Schmitt, Sebastian O. and Calmano, Stefan and Lorenz, Ulf and Ederer, Thorsten (2011):
Control of Uncertainties in Metal Forming by Applications of Higher Flexibility Dimensions.
In: Applied Mechanics and Materials, Transtech Publications, pp. 83-93, 104, [Article]

Pelz, P. F. and Bedarff, T. and Mathias, J. (2011):
Uncertainties with respect to active vibration control.
In: Applied Mechanics and Materials, pp. 161-75, 104, [Online-Edition: http://www.fst.tu-darmstadt.de/media/fachgebiet_fst/dokument...],
[Article]

Ziems, Jan and Ulbrich, Stefan (2011):
Adaptive Multilevel Inexact SQP Methods for PDE-constrained Optimization.
In: SIAM Journal on Optimization, pp. 1-40, 21, (1), [Article]

Pelz, P. F. and Lorenz, U. (2011):
Effiziente Energiewandlung als Optimierungs- und Skalierungsaufgabe.
In: TU Forschen, Wissenschaftsmagazin Nr. 1, 2011, [Online-Edition: http://www.fst.tu-darmstadt.de/media/fachgebiet_fst/dokument...],
[Article]

Abele, Eberhard and Hauer, Thomas and Haydn, Michael (2011):
Modellierung der Prozesskräfte beim Reiben mit Mehrschneidenreibahlen - Implementierung eines Kraftmodells für die Simulation der Reibbearbeitung.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 407-412, 101, (6), ISSN 1436-4980,
[Article]

Platz, Roland and Stapp, Christopher and Hanselka, Holger (2011):
Statistical approach to evaluating reduction of active crack propagation in aluminum panels with piezoelectric actuator patches.
In: Journal of Smart Materials and Structures, 2011, (20), [Article]

Brenneis, Matthias and Türk, Markus and Groche, Peter (2011):
Integration of Smart Materials by Incremental Forming.
In: Applied Mechanics and Materials, Trans Tech Publications, pp. 115-121, 104, [Article]

Engelhardt, Roland and Koenen, Jan Felix and Brenneis, Matthias and Kloberdanz, Hermann and Bohn, Andrea (2011):
An approach to classify methods to control uncertainty in load-carrying structures.
In: Applied Mechanics and Materials, Trans Tech Publications, pp. 33-44, 104, [Article]

Groche, Peter and Osakada, K. and Mori, K. and Altan, T. (2011):
Mechanical servo press technology for metal forming.
In: CIRP Annals - Manufacturing Technology, Elsevier, Manchester, pp. 1-24, 60/2, [Article]

Groche, Peter and Türk, Markus (2011):
Smart Structures through Incremental Forming.
In: CIRP Annals - Manufacturing Technology, Elsevier, Manchester, pp. 21-24, 60/1, [Article]

Abele, Eberhard and Haydn, Michael and Hauer, Thomas and Lorenz, Ulf and Ederer, Thorsten (2011):
Unsicherheitsoptimierte Prozesskette bei der Bohrungsfeinbearbeitung.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 730-736, 101, (11/12), [Article]

Bedarff, T. and Pelz, P. F. (2011):
Schwingungsminderung durch ein aktives hydropneu-matisches Feder-Dämpfer-System Entwicklung eines neuartigen Aktuators zur aktiven Schwingungs-minderung im Automobilbereich.
In: 2. VDI-Fachtagung Schwingungsdämpfung, [Online-Edition: http://www.fst.tu-darmstadt.de/media/fachgebiet_fst/dokument...],
[Article]

Abele, Eberhard and Hauer, Thomas and Haydn, Michael and Bölling, Christian (2011):
Reduzierte Unsicherheit bei der Bohrungsfeinbearbeitung - Neue Erkenntnisse zum Vorbohrungseinfluss auf den Reibprozess.
In: Werkstattstechnik online : wt, Springer VDI Verlag, Düsseldorf, pp. 81-87, 101, (1/2), ISSN 1436-4980,
[Article]

Hanselka, Holger and Platz, Roland (2010):
Ansätze und Maßnahmen zur Beherrschung von Unsicherheit in lasttragenden Systemen des Maschinenbaus.
In: Konstruktion, pp. 55-62, 2010, (11/12), [Article]

Groche, Peter and Kraft, Matthias and Schmitt, Sebastian O. and Martin, Alexander and Lorenz, Ulf and Ziems, Nicole and Pokutta, Sebastian (2010):
Rechnet sich Flexibilität in der Umformtechnik.
In: Werkstatttechnik Online 10/2010, pp. 734-742, 2010, (10), [Article]

Bedarff, T. and Pelz, P. F. (2010):
An active suspension with reduced complexity.
In: Conference Proceedings 7. IFK, pp. 393-404, 3, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_100108_I...],
[Article]

Giles, Mike and Ulbrich, Stefan (2010):
Convergence of Linearised and Adjoint Approximations for Discontinuous Solu-tions of Conservation Laws. Part 1: Linearised Approximations and Linearised Output Functionals.
In: SIAM Journal on Numerical Analysis, pp. 882-904, 48, [Article]

Groche, Peter and Türk, Markus (2010):
Integration von Funktionswerkstoffen in Bauteile durch inkrementelle Umformprozesse.
In: Werkstatttechnik online: wt, VDI-Verlag, pp. 707-711, 99, (10), [Article]

Ulbrich, Michael and Ulbrich, Stefan (2009):
Primal-dual interior-point methods for PDE-constrained optimization.
In: Math. Progr., Springer, pp. 435-485, 117, [Article]

Book Section

Leise, Philipp and Altherr, Lena C.
Rodrigues, H. C. (ed.) (2018):
Optimizing the Design and Control of Decentralized Water Supply Systems--A Case-Study of a Hotel Building.
In: EngOpt 2018, Proceedings of the 6th International Conference on Engineering Optimization, Cham, Springer, pp. 1241-1252, [Book Section]

Groche, Peter and Hoppe, Florian and Kessler, Thomas and Kleemann, Annemie (2018):
Industrial Working Environment 2025.
In: New Developments in Sheet Metal Forming, Stuttgart, Institute for Metal Forming Technology, pp. 125-136, [Book Section]

Kuttich, Anja and Götz, Benedict and Ulbrich, Stefan (2017):
Robust Optimization of Shunted Piezoelectric Transducers for Vibration Attenuation Considering Different Values of Electromechanical Coupling.
In: Model Validation and Uncertainty Quantification, Vol. 3: Proceedings of the 35th IMAC, A Conference and Exposition on Structural Dynamics, Springer, pp. 51-59, [Online-Edition: http://www.springer.com/de/book/9783319548579],
[Book Section]

Altherr, Lena C. and Ederer, Thorsten and Lorenz, Ulf and Pelz, P. F. and Pöttgen, Philipp
Lübbecke, Marco E. and Koster, Arie and Letmathe, Peter and Madlener, Reinhard and Peis, Britta and Walther, Grit (eds.) (2016):
Designing a Feedback Control System via Mixed-Integer Programming.
In: Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research, Cham, Springer, pp. 121-127, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/paper_150203_D...],
[Book Section]

Oberle, Marius and Sommer, Eugen and König, Christina (2016):
Reduction of Human Induced Uncertainty Through Appropriate Feedback Design.
In: Advances in Human Factors and System Interactions, AHFE 2016 International Conference on Human Factors and System Interactions, Florida, USA, Springer International Publishing, pp. 43-55, [Online-Edition: http://dx.doi.org/10.1007/978-3-319-41956-5_5/],
[Book Section]

Ulbrich, Stefan
Carraro, Thomas and Geiger, Michael and Körkel, Stefan and Rannacher, Rolf (eds.) (2016):
Preconditioners based on "Parareal" time-domain decomposition for time-dependent PDE-constrained optimization.
In: Multple Shooting and time domain decomposition methods, Cham, Springer, pp. 203-232, [Book Section]

Altherr, Lena C. and Ederer, Thorsten and Pöttgen, Philipp and Lorenz, Ulf and Pelz, Peter F.
Pelz, Peter F. and Groche, Peter (eds.) (2015):
Multicriterial Optimization of Technical Systems Considering Multiple Load and Availability Scenarios.
In: Uncertainty in mechanical engineering, Uetikon-Zürich, Trans Tech Publications, pp. 247-256, [Online-Edition: https://doi.org/10.4028/www.scientific.net/AMM.807],
[Book Section]

Altherr, Lena C. and Ederer, Thorsten and Vergé, Angela and Pelz, Peter F. (2015):
Algorithmische Struktursynthese eines hydrostatischen Getriebes.
In: Elektrik, Mechanik, Fluidtechnik in der Anwendung, Düsseldorf, VDI-Verlag, pp. 145-155, [Book Section]

Zocholl, Maximilian and Trinkel, Thomas and Anderl, Reiner (2014):
Methode zur Beherrschung von Unsicherheit in expliziten 3D-CAD Geometrien.
In: 12. Gemeinsames Kolloquium Konstruktionstechnik (KT 2014). Methoden in der Produktentwicklung: Kopplung von Strategien und Werkzeugen im Produktentwicklungsprozess, Bayreuth, pp. 173-182, [Book Section]

Wiebel, Marion and Eifler, Tobias and Mathias, Johannes and Kloberdanz, Hermann and Bohn, Andrea and Birkhofer, Herbert (2013):
Modellierung von Unsicherheit in der Produktentwicklung - Ein Vergleich zwischen Wahrscheinlichkeitstheorie und Möglichkeitstheorie.
In: Exploring Uncertainty, Wiesbaden, Springer Gabler, pp. 245-269, [Book Section]

Anderl, Reiner and Maurer, Michael and Sprenger, André (2013):
Representation, Presentation and Visualization of Uncertainty.
In: CIRP Design 2012 - Sustainable Product Development - -Ed.: Chakrabarti, Amaresh , London, Springer , pp. 257-266, [Online-Edition: http://dx.doi.org/10.1007/978-1-4471-4507-3_25],
[Book Section]

Enss, Georg Christoph and Platz, Roland and Hanselka, Holger
Boller, Christian and Janocha, Hartmut (eds.) (2013):
Uncertainty in passive and active stabilisation of critically loaded columns.
In: New Trends in Smart Technologies, Fraunhofer Verlag, pp. 61-67, [Book Section]

Drewes, Sarah and Ulbrich, Stefan
Lee, Jon and Leyffer, Sven (eds.) (2012):
Subgradient Based Outer Approximation for Mixed Integer Second Order Cone Programming.
In: Mixed-Integer Nonlinear Optimization, New York, Springer, pp. 41-59, [Book Section]

Clever, Debora and Lang, Jens and Ulbrich, Stefan and Ziems, Jan
Leugering, Guenter (ed.) (2012):
Generalized Multilevel SQP- methods for PDAE-constrained Optimization Based on Space-Time Adaptive PDAE Solvers.
In: Constrained Optimization and Optimal Control for Partial Differential Equations, Basel, Springer, pp. 37-60, [Book Section]

Avemann, Jörg and Schmitt, Sebastian O. and Ederer, Thorsten and Lorenz, Ulf and Groche, Peter (2012):
Analysis of Market Demand Parameters for the Evaluation of Flexibility in Forming Technology.
In: Enabling Manufacturing Competitiveness and Economic Sustainability, Berlin, Springer-Verlag, pp. 458-463, [Book Section]

Sprenger, André and Mosch, Lucia and Anderl, Reiner
Brökel, Klaus and Stelzer, Ralph and Feldhusen, Jörg and Rieg, Frank and Grothe, Karl-Heinrich (eds.)
Gemeinsames Kolloquium Konstruktionstechnik (Corporate Creator) (2011):
Bereitstellung von Prozesswissen zur Beherrschung von Unsicherheiten lasttragender Systeme.
In: Integrierte Produktentwicklung für einen globalen Markt, Aachen, Shaker, [Book Section]

Mosch, Lucia and Sprenger, André and Anderl, Reiner (2011):
Consideration of Uncertainty in Virtual Product Design.
In: Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (DETC), American Society of Mechanical Engineers (ASME), [Book Section]

Ederer, Thorsten and Lorenz, Ulf and Martin, Alexander and Wolf, Jan (2011):
Quantified Linear Programs: A Computational Study.
In: Algorithms – ESA 2011, Springer, pp. 203-214, [Online-Edition: http://dx.doi.org/10.1007/978-3-642-23719-5_18],
[Book Section]

Mosch, Lucia and Sprenger, André and Anderl, Reiner (2010):
Approach for Visualization of Uncertainty in CAD-Systems based on Ontologies.
In: Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition (IMECE), American Society of Mechanical Engineers (ASME), [Online-Edition: urn:nbn:de:tuda-tuprints-23599],
[Book Section]

Anderl, Reiner and Mosch, Lucia and Nattermann, Roland
Gausemeier, Jürgen and Grafe, Michael (eds.) (2009):
Ansatz zur Visualisierung von Unsicherheiten in immersiver Arbeitsumgebung.
In: Augmented & Virtual Reality in der Produktentstehung, Paderborn, HNI-Verlagsschriften, pp. 333-346, [Book Section]

Anderl, Reiner and Spieß, Daniel (2009):
Application of Business Rules in Design Processes to Tackle Uncertainty in Product Development.
In: Proceedings of IMECE 2009, ASME International Mechanical Engineering Congress and Exposition, Orlando, [Book Section]

Conference or Workshop Item

Hoppe, Florian and Pihan, Clemens and Groche, Peter (2019):
Closed-loop control of eccentric presses based on inverse kinematic models.
Elsevier B.V, In: Procedia Manufacturing, 29, DOI: 10.1016/j.promfg.2019.02.132,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S235197891...],
[Conference or Workshop Item]

Sinz, Julian and Niessen, Benedikt and Groche, Peter
Schmitt, Robert and Schuh, Günther (eds.) (2018):
Combined Roller and Plain Bearings for Forming Machines: Design Methodology and Validation.
Springer Nature, In: Advances in Production Research: Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), [Conference or Workshop Item]

Groche, Peter and Griesel, Dominic and Chi, Fansun and Franceschi, Alessandro and Franke, Wilken and Hoppe, Florian and Kessler, Thomas and Knoll, Maximilian and Köhler, Stefan and Krech, Martin and Kretz, Felix and Mann, Arne and Sinz, Julian and Sticht, Peter and Suckow, Timon and Traub, Tilman and Volke, Patrick and Wang, Tianbo and Wu, Yutian (2018):
Entwicklung moderner Umformtechnologien am PtU.
In: Tagungsband zum 13. Umformtechnischen Kolloquium Darmstadt, Darmstadt, 25.09.2018, [Conference or Workshop Item]

Joggerst, Laura and Knoll, Maximilian and Hoppe, Florian and Wendt, Janine and Groche, Peter (2018):
Autonomous Manufacturing Processes under Legal Uncertainty.
In: Applied Mechanics and Materials, [Conference or Workshop Item]

Kuttich, Anja and Ulbrich, Stefan
von Scheven, Malte and Keip, Marc-André and Karajan, Nils (eds.) (2017):
Feedback Controller Design and Topology Optimization for Truss Structures Under Uncertain Dynamic Loads.
In: 7th GACM Colloquium on Computational Mechanics for Young Scientists from Academia and Industry : proceedings ; a conference under the auspice of the German Association for Computational Mechanics (GACM), Stuttgart, [Online-Edition: https://elib.uni-stuttgart.de/handle/11682/9351?mode=simple],
[Conference or Workshop Item]

Würtenberger, Jan and Lotz, Julian and Freund, Tillmann and Kirchner, Eckhard
Maier, Anja and Škec, Stanko and Kim, Harrison and Kokkolaras, Michael and Oehmen, Josef and Fadel, Georges and Salustri, Filippo and Van der Loos, Mike (eds.) (2017):
An approach to handle uncertainty during the process of product modelling.
In: 21st International Conference on Engineering Design (ICED17), Vancouver, Canada, 21.-25.08.2017, In: Proceedings of the 21st International Conference on Engineering Design (ICED17), 1, [Conference or Workshop Item]

Freund, Tillmann and Würtenberger, Jan and Lotz, Julian and Rommel, Carmen and Kirchner, Eckhard
Maier, Anja and Škec, Stanko and Kim, Harrison and Kokkolaras, Michael and Oehmen, Josef and Fadel, Georges and Salustri, Filippo and Van der Loos, Mike (eds.) (2017):
Design for robustness - systematic application of design guidelines to control uncertainty.
In: 21st International Conference on Engineering Design (ICED17), Vancouver, Canada, 21.-25.08.2017, In: Proceedings of the 21st International Conference on Engineering Design (ICED17), 1, [Conference or Workshop Item]

Oberle, Marius and Helfert, Marlene and König, Christina and Bruder, Ralph (2017):
Experimentelle Untersuchung des menschlichen Einflusses auf die Unsicherheit in der Mensch-Technik-Interaktion.
In: 63. Kongress der Gesellschaft für Arbeitswissenschaft, Brugg (Schweiz), 15.02-17.02.2017, [Conference or Workshop Item]

Götz, Benedict and Platz, Roland and Melz, Tobias (2017):
Consistent approach to describe and evaluate uncertainty in vibration attenuation using resonant piezoelectric shunting and tuned mass dampers.
In: 2nd International Symposium on Uncertainty Quantification and Stochastic Modeling, Rouen, France, June 23-27, 2014, In: Mechanics & Industry, 2017, Vol. 18, [Conference or Workshop Item]

Oberle, Marius and König, Christina and Bruder, Ralph
Schwarz, M. and Harfmann, J. (eds.) (2017):
Investigation of the Action Sequence of Pilots during Landing using Markov Models.
In: Proceedings of the 32nd Conference of the European Association for Aviation Psychology, Groningen,NL, In: EAAP Conference, Cascais, Portugal, 26.-30.09.2016, [Conference or Workshop Item]

Schaeffner, Maximilian and Platz, Roland (2017):
Linear Parameter-Varying (LPV) Buckling Control of an Imperfect Beam-Column Subject to Time-Varying Axial Loads Model Validation and Uncertainty Quantification.
In: 35th IMAC, A Conference and Exposition on Structural Dynamics 2017, Garden Grove, USA, 29.01. – 02.02.2017, In: Springer International Publishing, [Conference or Workshop Item]

Krech, Martin and Groche, Peter (2017):
Robust force and torque measurements by integrated sensors in hollow shafts.
In: SENSOR 2017 - 18th International Conference on Sensors and Measurement Technology, Nürnberg, 30.05. - 01.06.2017, [Conference or Workshop Item]

Stein, Philipp and Franke, Wilken and Hoppe, Florian and Hesse, Daniel and Mill, Katharina and Groche, Peter (2017):
Control of Anisotropic Shape Deviation in Single Point Incremental Forming of Paperboard.
In: ESAFORM 2017, Dublin, Irland, 26.-28.04.2017, [Conference or Workshop Item]

Hesse, Daniel and Hoppe, Florian and Groche, Peter (2017):
Controlling Product Stiffness by an Incremental Sheet Metal Forming Process.
In: Procedia Manufacturing, In: 45th SME North American Manufacturing Research Conference (NAMRC 45), Los Angeles, USA, 04.-08.06.2017, 10, [Conference or Workshop Item]

Götz, Benedict and Platz, Roland and Melz, Tobias (2017):
Lateral Vibration Attenuation of a Beam with Piezo-Elastic Supports Subject to Varying Axial Tensile and Compressive Loads, Model Validation and Uncertainty Quantification.
In: 35th IMAC, A Conference and Exposition on Structural Dynamics 2017, Garden Grove, USA, 29.01. – 02.02.2017, In: Springer International Publishing, [Conference or Workshop Item]

Gehb, Christopher Maximilian and Platz, Roland and Melz, Tobias (2017):
Global Load Path Adaption in a Simple Kinematic Load-Bearing Structure to Compensate Uncertainty of Misalignment Due to Changing Stiffness Conditions of the Structure's Supports Model Validation and Uncertainty Quantification.
In: 35th IMAC, A Conference and Exposition on Structural Dynamics 2017, Garden Grove, USA, 29.01. – 02.02.2017, In: Springer International Publishing, [Conference or Workshop Item]

Platz, Roland and Götz, Benedict (2017):
Non-probabilistic Uncertainty Evaluation in the Concept Phase for Airplane Landing Gear Design Model Validation and Uncertainty Quantification.
In: 35th IMAC, A Conference and Exposition on Structural Dynamics 2017, Garden Grove, USA, 29.01. – 02.02.2017, In: Springer International Publishing, [Conference or Workshop Item]

Li, Sushan and Götz, Benedict and Schaeffner, Maximilian and Platz, Roland (2017):
Approach to prove the efficiency of the Monte Carlo method combined with the elementary effect method to quantify uncertainty of a beam structure with piezo-elastic supports.
In: 2nd ECCOMAS - International Conference on Uncertainty Quantification in Computational Sciences and Engineering, Rhodes Island, Greece, 15–17 June 2017, [Conference or Workshop Item]

Mallapur, Shashidhar and Platz, Roland (2017):
Quantification and Evaluation of Uncertainty in the Mathematical Modelling of a Suspension Strut Using Bayesian Model Validation Approach.
In: 35th IMAC, A Conference and Exposition on Structural Dynamics 2017, Garden Grove, USA, 29.01. – 02.02.2017, In: Springer International Publishing, [Conference or Workshop Item]

Krech, Martin and Trunk, Andreas and Groche, Peter (2017):
Controlling the sensor properties of smart structures produced by metal forming.
In: International Conference on Technology of Plasticity 2017, Procedia Engineering 207C, DOI: 10.1016/j.proeng.2017.10.906,
[Conference or Workshop Item]

Gehb, Christopher Maximilian and Platz, Roland and Melz, Tobias (2017):
Comparison of Control Strategies for Global Load Path Redistribution in a Load-bearing Structure.
In: International Conference on Structural Engineering Dynamics (ICEDyn), Ericeira, Portugal, 3-5 July 2017, [Conference or Workshop Item]

Mallapur, Shashidhar and Platz, Roland (2017):
Bayesian Inference Approach to Evaluate the Uncertainty in the Mathematical Modelling of a Suspension Strut.
In: International Conference on Structural Engineering Dynamics (ICEDyn), Ericeira, Portugal, 3-5 July 2017, [Conference or Workshop Item]

Bölling, Christian (2017):
Control of Uncertainty in High Precision Machining of Valve Guide and Seat in a Combustion Engine.
In: 1st Sino-German Forum of Manufacuturing, May 22nd–25th, 2017, Nanjing, Taicang (China), [Conference or Workshop Item]

Platz, Roland and Melzer, Christiane Marianne (2016):
Uncertainty quantification for decision making in early design phase for passive and active vibration isolation.
In: ISMA2016 including USD 2016 International Conference on Uncertainty in Structural Dynamics, Leuven, 19.-21. September 2016, [Conference or Workshop Item]

Götz, Benedict and Heuss, Oliver and Platz, Roland and Melz, Tobias (2016):
Optimal tuning of shunt parameters for lateral beam vibration attenuation with three collocated piezoelectric stack transducers.
In: EACS 2016 – 6th European Conference on Structural Control, Sheffield, England, 11.-13.07.2016, [Conference or Workshop Item]

Würtenberger, Jan and Freund, Tillmann and Lotz, Julian and Kloberdanz, Hermann (2016):
Development of a methodical approach to handle uncertainty during the process of product modelling.
In: Proceedings of the 14th International Design Conference DESIGN 2016, Dubrovnik, In: Design Conference 2016, Dubrovnik, 16.05.2016 - 19.05.2016, [Conference or Workshop Item]

König, Christina and Oberle, Marius and Hofmann, Thomas (2016):
„Mein Telefon ist resilient“ – Resilienz als Chance zur Gestaltung von Arbeitsmitteln.
In: 62. Frühjahrskongress der Gesellschaft für Arbeitswissenschaft, Aachen, 02.-04.03.2016, [Conference or Workshop Item]

Platz, Roland and Götz, Benedict and Melz, Tobias (2016):
Approach to evaluate and to compare basic structural design concepts of landing gears in early stage of development under uncertainty.
In: 34th IMAC Annual Conference on Experimental and Applied Mechanics Model Validation and Uncertainty Quantification, Orlando, USA, 25.-28.01.2016, [Conference or Workshop Item]

Mallapur, Shashidhar and Platz, Roland (2016):
Description and evaluation of uncertainty in the early development phase of a beam-column system subjected to passive and active buckling control.
In: 4SMARTS Symposium für Smarte Strukturen und Systeme, Darmstadt, 6.-7. April 2016, [Conference or Workshop Item]

Freund, Tillmann and Würtenberger, Jan and Blakaj, Petrit and Kloberdanz, Hermann (2015):
An approach to using elemental interfaces to assess design clarity.
In: Uncertainty in Mechanical Engineering II, In: International Conference on Uncertainty in Mechanical Engineering - ICUME, Darmstadt, 19.-20.11.2015, In: Applied mechanics and materials, 807, [Conference or Workshop Item]

Würtenberger, Jan and Gramlich, Sebastian and Freund, Tillmann and Lotz, Julian and Zocholl, Maximilian and Kloberdanz, Hermann (2015):
Uncertainty in product modelling within the development process.
In: Uncertainty in Mechanical Engineering II, Darmstadt, In: International Conference on Uncertainty in Mechanical Engineering - ICUME, Darmstadt, 19.-20.11.2015, In: Applied mechanics and materials, 807, [Conference or Workshop Item]

Altherr, Lena C. and Ederer, Thorsten and Farnetane, Lucas S. and Vergé, Angela and Pöttgen, Philipp and Pelz, Peter F. (2015):
Multi-criterial Design of a Hydrostatic Transmission System by Mixed-Integer Programming.
In: Operations Research Proceedings 2015: Selected Papers of the International Conference on Operations Research, In: OR 2015, Wien, September 1-4, 2015, [Conference or Workshop Item]

Melzer, Christiane Marianne and Platz, Roland and Melz, Tobias (2015):
Comparison of Methodical Approaches to Describe and Evaluate Uncertainty in the Load-Bearing Capacity of a Truss Structure.
In: 4th International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Prague, Czech Republic, 1-4 September 2015, [Conference or Workshop Item]

Oberle, Marius and Bruder, Ralph (2015):
Process model for the investigation of human uncertainty during the usage of load bearing systems.
In: Proceedings 19th Triennial Congress of the IEA, Melbourne (Australien), 09.-14.08.2015, [Conference or Workshop Item]

Oberle, Marius and Ederer, Thorsten and König, Christina (2015):
Mathematical and human-centered optimization of the distribution of rare resources on the example of seating choice.
In: Proceedings 19th Triennial Congress of the IEA, Melbourne (Australien), 09.-14.08.2015, [Conference or Workshop Item]

Pelz, P. F. and Pfetsch, Marc E. (2015):
Der Unsicherheit von Anfang an auf der Spur.
In: PT-Magazin für Wirtschaft und Gesellschaft, [Conference or Workshop Item]

Lotz, Julian and Freund, Tillmann and Würtenberger, Jan and Kloberdanz, Hermann (2015):
Principles to develop size ranges of products with ergonomic requirements, using a robust design approach.
In: Proceedings of the 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015) and the Affiliated Conferences, AHFE 2015, Las Vegas, In: 6th International Conference on Applied Human Factors and Ergonomics (AHFE 2015), Las Vegas, 26.-31.07.2015, [Conference or Workshop Item]

Schaeffner, Maximilian and Platz, Roland and Melz, Tobias (2015):
Active buckling control of an axially loaded beam-column with circular cross-section by active supports with integrated piezoelectric actuators.
In: SMART 2015; 7th ECCOMAS Thematic Conference on Smart Structures and Materials, S. Miguel, Azores, Portugal, 3 - 6 June 2015, [Conference or Workshop Item]

Götz, Benedict and Platz, Roland and Melz, Tobias (2015):
Lateral vibration attenuation of a beam with circular cross-section by supports with integrated resonantly shunted piezoelectric transducers.
In: SMART 2015; 7th ECCOMAS Thematic Conference on Smart Structures and Materials, S. Miguel, Azores, Portugal, 3 - 6 June 2015, [Conference or Workshop Item]

Melzer, Christiane Marianne and Platz, Roland and Melz, Tobias (2015):
Consistent Comparison of Methodical Approaches to Describe and Evaluate Uncertainty in the Load-Carrying Capacity of a Truss Structure.
In: International Conference on Structural Engineering Dynamics ICEDyn, Lagos, Portugal, 22-24 June 2015, [Conference or Workshop Item]

Groche, Peter and Hohmann, Johannes and Kessler, Thomas and Schreiner, Johanna and Krech, Martin and Duschka, Alexander and Monnerjahn, Vinzent and Ćorić, Marko (2015):
Industrie 4.0 - Forschung am PtU.
Meisenbach Verlag GmbH, Bamberg, In: 12. Umformtechnisches Kolloquium Darmstadt »Industrie 4.0 in der Umformtechnik«, [Conference or Workshop Item]

Pöttgen, Philipp and Ederer, Thorsten and Pelz, P. F. (2015):
Examination and Optimisation of a heating circuit using TOR.
In: EST 2015, Karlsruhe, 19-21 Mai 2015, [Online-Edition: http://wl.fst.tu-darmstadt.de/wl/publications/abstract_14111...],
[Conference or Workshop Item]

Ochs, Steffen and Pitz, Katrin and Platz, Roland and Melz, Tobias (2015):
Quantitative Beschreibung und Bewertung von Unsicherheit für ein lasttragendes strukturmechanisches System.
In: TTZ 2015 – 27. Fachtagung Technische Zuverlässigkeit, Leonberg, 20. - 21. April 2015, [Conference or Workshop Item]

Gehb, Christopher Maximilian and Platz, Roland and Melz, Tobias (2015):
Approach to prevent locking in a spring-damper system by adaptive load redistribution in auxiliary kinematic guidance elements.
In: SPIE Smart Structures/NDE, San Diego, California, USA, 8–12 March 2015, [Conference or Workshop Item]

Krech, Martin and Groche, Peter
Drossel, Prof. Welf-Guntram (ed.) (2015):
Smart machine elements by rotary swaging - Manufacturing and Applications.
In: 5th Scientific Symposium of the CRC/TR 39 PT-PIESA Light-Weight Design by Function Integration, [Conference or Workshop Item]

Groche, Peter and Krech, Martin (2015):
Integration of functions through rotary swaging – New possibilities for the monitoring of states and loads in tubular machine elements.
In: New Developments in Forging Technology 2015, [Conference or Workshop Item]

Calmano, Stefan and Hesse, Daniel and Hoppe, Florian and Groche, Peter
Qin, Y. and Dean, T. A. and Lin, J. and Yuan, S. J. and Vollertsen, F. (eds.) (2015):
Evaluation of control strategies in forming processes.
edp science, In: MATEC Web of Conferences (Tagungsband der 4. International Conference on New Forming Technology, ICNFT 2015), [Conference or Workshop Item]

Melzer, Christiane Marianne and Krech, Martin and Kristl, Lisa and Freund, Tillmann and Kuttich, Anja and Zocholl, Maximilian and Groche, Peter and Kohler, Michael and Platz, Roland (2015):
Methodical Approaches to Describe and Evaluate Uncertainty in the Transmission Behavior of a Sensory Rod.
Trans Tech Publications, Switzerland, In: Applied Mechanics and Materials, 807, [Conference or Workshop Item]

Sinz, Julian and Hesse, Daniel and Öchsner, Sebastian and Groche, Peter (2015):
Data-based support in the development of press systems using the example of sheet metal forming.
Trans Tech Publications, Switzerland, In: Applied Mechanics and Materials, 807, [Conference or Workshop Item]

Platz, Roland and Enss, Georg Christoph (2015):
Comparison of Uncertainty in Passive and Active Vibration Isolation.
In: 33nd IMAC, Conference and Éxposition on Structural Dynamics, Orlando, Florida, USA, February 2-5, 2015, [Conference or Workshop Item]

Götz, Benedict and Platz, Roland and Melz, Tobias (2014):
Effect of uncertain boundary conditions and uncertain axial loading on lateral vibration attenuation of a beam with shunted piezoelectric transducers.
In: International Conference on Uncertainty in Structural Dynamics, Leuven (Belgium), September 15-17, 2014, In: Proceedings of ISMA2014 including USD2014, [Conference or Workshop Item]

Schaeffner, Maximilian and Enss, Georg Christoph and Platz, Roland (2014):
Influence of uncertain support boundary conditions on the buckling load of an axially loaded beam-column.
In: International Conference on Uncertainty in Structural Dynamics, Leuven (Belgium), September 15-17, 2014, In: Proceedings of ISMA2014 including USD2014, [Conference or Workshop Item]

Würtenberger, Jan and Kloberdanz, Hermann (2014):
An approach to identifying the ideal time to perform an FMEA during the product development process.
In: Proceedings of the International Symposium on Robust Design 2014, Copenhagen, Denmark, In: FIRST INTERNATIONAL SYMPOSIUM ON ROBUST DESIGN, Copenhagen, Denmark, 14.-15.08.2014, [Online-Edition: http://www.robustdesign.org/ISoRD14/],
[Conference or Workshop Item]

Lotz, Julian and Kloberdanz, Hermann
Howard, Thomas J. and Eifler, Tobias (eds.) (2014):
Scaling Under Dynamic Uncertainty Using Laws of Growth.
In: Proceedings of the International Symposium on Robust Design - ISoRD14, Copenhagen, Denmark, In: International Symposium on Robust Design - ISoRD14, Copenhagen, 14.-15.08.2014, [Online-Edition: http://proceedings.dtu.dk/fedora/repository/dtu:2083],
[Conference or Workshop Item]

Ondoua, Serge and Platz, Roland (2014):
Numerical and experimental investigation of parameter uncertainty in the working diagram and in use of a single piezoelectric stack actuator to stabilize a slender beam column against buckling.
In: 9th International Conference on Structural Dynamics, EURODYN 2014, Porto, Portugal, June 30 - July 2, 2014, In: Proceedings, [Conference or Workshop Item]

Platz, Roland and Enss, Georg Christoph and Ondoua, Serge and Melz, Tobias (2014):
Active stabilization of a slender beam-column under static axial loading and estimated uncertainty in actuator properties.
In: Second International Conference on Vulnerability and Risk Analysis and Management (ICVRAM) and the Sixth International Symposium on Uncertainty Modeling and Analysis (ISUMA), Liverpool/UK, July 13-16, 2014, In: Proceedings, [Conference or Workshop Item]

Gehb, Christopher Maximilian and Platz, Roland and Melz, Tobias (2014):
Influence of varying support stiffness on the load path in a 2D-truss for structural health control.
In: Sixth World Conference on Structural Control and Monitoring (6WCSCM), Barcelona/Spain, July 15-17, 2014, [Conference or Workshop Item]

Freund, Tillmann and Sarnes, Julian and Kloberdanz, Hermann and Würtenberger, Jan (2014):
Modeling of use phase variability and application in robust and ecodesign.
In: Proceedings of the 13th International Design Conference DESIGN 2014, Dubrovnik, In: Design 2014, 2, [Conference or Workshop Item]

Lotz, Julian and Kloberdanz, Hermann and Freund, Tillmann and Rath, Karola (2014):
Estimating Uncertainty of Scaled Products Using Similarity Relations and Laws of Growth.
In: Proceedings of the 13th International Design Conference DESIGN 2014, Dubrovnik, In: Design Conference 2014, Dubrovnik, 19.-22.05.2014, [Conference or Workshop Item]

Oberle, Marius and Bruder, Ralph
GfA, (ed.) (2014):
Untersuchung des menschlichen Einfluss auf die Unsicherheit der Nutzung.
In: Gestaltung der Arbeitswelt der Zukunft, In: 60. Kongress der Gesellschaft für Arbeitswissenschaft, München, 12.-14. März 2014, [Conference or Workshop Item]

Schaeffner, Maximilian and Enss, Georg Christoph and Platz, Roland (2014):
Mathematical modeling and numerical simulation of an actively stabilized beam-column with circular cross-section.
In: Active and Passive Smart Structures and Integrated Systems 2014, San Diego, CA/USA, March 9-13, 2014, In: Proceedings of, SPIE Vol. 9057, [Conference or Workshop Item]

Enss, Georg Christoph and Platz, Roland (2014):
Statistical Approach for Active Buckling Control with Uncertainty.
In: Topics in Modal Analysis .- (Proceedings; vol. 7), In: IMAC XXXII, Orlando, FLorida/USA, Feb. 3-6, 2014, [Conference or Workshop Item]

Platz, Roland and Ondoua, Serge and Enss, Georg Christoph and Melz, Tobias (2014):
Approach to Evaluate Uncertainty in Passive and Active Vibration Reduction.
In: Model Validation and Uncertainty Quantification (Proceedings; vol. 3), In: IMAC XXXII, Orlando, FLorida/USA, Feb. 3-6, 2014, [Conference or Workshop Item]

McBain, Gabriel and Wohlmuth, Michael and Calmano, Stefan and Stahlmann, Jörg (2014):
Überlegungen zur Nutzung der Umformsimulation für die Prozesssteuerung und die Prozessüberwachung.
VDI, In: Tagungsband 29. Jahrestreffen der Kaltmassivumformer, [Conference or Workshop Item]

Avemann, Jörg and Calmano, Stefan and Schmitt, Sebastian O. and Groche, Peter (2014):
Total Flexibility in Forming Technology by Servo Presses.
Trans Tech Publications, In: WGP Congress 2012 - Progress in Production Engineering, In: Periodical of Advanced Materials Research, 907, [Conference or Workshop Item]

Freund, Tillmann and Würtenberger, Jan and Calmano, Stefan and Hesse, Daniel and Kloberdanz, Hermann
Howard, Thomas J. and Eifler, Tobias (eds.) (2014):
Robust design of active systems - An Approach to Considering Disturbances within the Selection of Sensors.
In: Proceedings of the International Symposium on Robust Design 2014, Copenhagen, Denmark, In: FIRST INTERNATIONAL SYMPOSIUM ON ROBUST DESIGN, Copenhagen, Denmark, 14.-15.08.2014, In: Proceedings of the International Symposium on Robust Design, [Online-Edition: http://www.robustdesign.org/ISoRD14/],
[Conference or Workshop Item]

Zocholl, Maximilian and Anderl, Reiner (2014):
Ontology-based Representation of Time-dependent Uncertainty Information for Parametric Product Data Models.
In: KMIS 2014. Proceedings of the International Conference on Knowledge Management and Information Sharing, ISBN 978-989-758-050-5,
[Conference or Workshop Item]

Würtenberger, Jan and Kloberdanz, Hermann and Lotz, Julian and Ahsen, Anette von (2014):
Application of the FMEA during the product development process - dependencies between level of information and quality of result.
In: Proceedings of the 13th International Design Conference DESIGN 2014, Dubrovnik, In: Design Conference 2014, Dubrovnik, 19.-22.05.2014, [Conference or Workshop Item]

Ondoua, Serge and Platz, Roland and Hanselka, Holger (2013):
Unsicherheit im Arbeitsdiagramm eines piezoelektrischen Aktuators für die aktive Stabilisierung von Stäben; Sonderdruck + eigene Kopfzeile, VDI-Berichte Nr. 2210, 2013.
In: 26. Fachtagung Technische Zuverlässigkeit TTZ 2013, Entwicklung und Betrieb zuverlässiger Produkte, Leonberg/Stuttgart, 23./24.04.2013, [Conference or Workshop Item]

Brenneis, Matthias and Groche, Peter (2013):
Sensorische Verbindungselemente durch Kaltmassivumformung.
In: 28. Jahrestreffen der Kaltmassivumformer, Düsseldorf, [Conference or Workshop Item]

Groche, Peter and Brenneis, Matthias and Görtan, Okan and Schmitt, Sebastian O. (2013):
Recent Developments In Incremental Bulk Forming.
Kyoto, Japan, In: Proceedings of the 6th JSTP International Seminar on Precision Forging, [Conference or Workshop Item]

Calmano, Stefan and Schmitt, Sebastian O. and Groche, Peter (2013):
Prevention of over-dimensioning in light-weight structures by control of uncertainties during production.
Stuttgart, MAT INFO Werkstoff-Informationsgesellschaft mbH, In: Proceedings of the International Conference on “New Developments in Forging Technology”, [Conference or Workshop Item]

Hauer, Thomas (2013):
Bearbeitung schwer zerspanbarer Komponenten im automobilen Antriebstrang.
GFE – Gesellschaft für Fertigungstechnik und Entwicklung Schmalkalden e.V., In: Bearbeitung schwer spanbarer Werkstoffe – Ergebniss aus Wissenschaft und Praxis, 19. Juni 2013, Schmalkalden, In: Workshopreihe "Fertigungstechnik/Maschinenbau", [Conference or Workshop Item]

Hauer, Thomas and Abele, Eberhard (2013):
New methods for Cutting Processes in Powertrain Manufacturing.
In: 18.º Seminário Internacional Alta Tecnologia | Tema: Inovações Tecnológicas na Manufatura, Santa Bárbara d'Oeste, SP - Brazil, Teatro Unimep - Campus Taquaral, 10.10.2013, ISSN 2175-9960, [Conference or Workshop Item]

Eifler, Tobias and Matthias, Johannes and Kloberdanz, Hermann and Bohn, Andrea and Birkhofer, Herbert (2012):
Integration qualitativer und quantitativer Information als Grundlage für die Auswahl von Robust Design Strategien.
In: 23. Dxf-Symposium, Bamberg, [Conference or Workshop Item]

Eifler, Tobias and Wiebel, Marion and Haydn, Michael and Hauer, Thomas and Bohn, Andrea (2012):
Non-probabilisitc analysis of uncertainty in early design stages.
In: Design 2012, Dubrovnik, Kroatien, 01.05.2012, [Conference or Workshop Item]

Sprenger, André and Anderl, Reiner (2012):
Product lifecycle oriented representation of uncertainty.
In: PLM: Towards Knowledge-Rich Enterprises, In: The IFIP WG 5.1 9th International Conference on Product Lifecycle Management, Montreal (CAN), [Conference or Workshop Item]

Sprenger, André and Anderl, Reiner (2012):
Ontology-Supported Process Based Geometric Tolerancing.
In: 12th CIRP Conference on Computer Aided Tolerancing, Huddersfield UK, 18-19.04.2012, [Conference or Workshop Item]

Enss, Georg Christoph and Platz, Roland and Hanselka, Holger (2012):
Mathematical modelling of postbuckling in a slender beam column for active stabilisation control with respect to uncertainty.
In: Proc. of SPIE Vol. 8341, 834119, In: SPIE - Active and Passive Smart Structures and Integrated Systems 2012, San Diego, [Conference or Workshop Item]

Mosch, Lucia and Adolph, Siri and Betz, R. and Eckardt, W. and Tizi, A. and Mathias, Johannes and Habermehl, Kai and Bohn, Andrea and Ulbrich, Stefan (2012):
Control of Uncertainties within an interdisciplinary design approach of a robust high heel,.
In: Uncertainties 2012, Maresias-SP, Brasilien, 20.02.2012, [Conference or Workshop Item]

Ibis, Mesut and Griesheimer, Stefan and Duschka, Alexander and Brenneis, Matthias and Salun, Larisa and Dörsam, Edgar and Groche, Peter (2012):
Integration von elektrischen und elektronischen Komponenten in Strukturbauteile durch Umformen.
In: 11. Umformtechnisches Kolloquium Darmstadt, März 2012 : "Flexible Umformtechnik", [Conference or Workshop Item]

Hauer, Thomas and Haydn, Michael and Abele, Eberhard (2012):
Uncertainties in process chains with focus on the drilling and reaming process.
In: 1st International Symposium on Uncertainty Quantification and Stochastic Modeling, 26. Februar-02.März 2012, Maresias, São Sebastião, SP, Brasilien, 2012, [Conference or Workshop Item]

Sprenger, André and Haydn, Michael and Ondoua, Serge and Mosch, Lucia and Anderl, Reiner
Hanselka, Holger and Groche, Peter and Platz, Roland (eds.) (2011):
Ontology-based Information Model for the Exchange of Uncertainty in Load Carrying Structures.
In: Proceedings of the 1st International Conference on Uncertainty in Mechanical Engineering (ICUME 2011) November 14-15, 2011, Darmstadt, Durnten-Zurich, TransTech Publications, ISBN 978-3-03785-261-3,
[Conference or Workshop Item]

Eifler, Tobias and Enss, Georg Christoph and Haydn, Michael and Mosch, Lucia and Platz, Roland and Hanselka, Holger (2011):
Approach for a consistent description of uncertainty in process chains of load carrying mechanical systems.
In: Special Edition of the Journal of Applied Mechanics and Materials Vol. 104 (2012), Trans Tech Publications,, In: Proceedings of the First International Conference on Uncertainty in Mechanical Engineering (ICUME), Darmstadt, Germany, 14.11.2011-15.11.2011, [Conference or Workshop Item]

Koenen, Jan Felix and Enss, Georg Christoph and Ondoua, Serge and Platz, Roland and Hanselka, Holger (2011):
Evaluation and control of uncertainty in using an active column system.
In: Special Edition of the Journal of Applied Mechanics and Materials Vol. 104 (2012), Trans Tech Publications,, In: First International Conference on Uncertainty in Mechanical Engineering (ICUME), Darmstadt, Germany, [Conference or Workshop Item]

Sichau, Adrian and Ulbrich, Stefan (2011):
A Second Order Approximation Technique for Robust Shape Optimization.
In: Special Edition of the Journal of Applied Mechanics and Materials Vol. 104 (2012), Trans Tech Publications, In: First International Conference on Uncertainty in Mechanical Engineering (ICUME), Darmstadt, Germany, 14.11.2011-15.11.2011, [Conference or Workshop Item]

Ondoua, Serge and Platz, Roland and Nuffer, Jürgen and Hanselka, Holger (2011):
A study of uncertainties in active load carrying systems due to scatter in specifications of piezoelectric actuators.
In: European Society for Safety and Reliability ESREL, Troyes, Frankreich, 18.-22.08.11, [Conference or Workshop Item]

Enss, Georg Christoph and Platz, Roland and Hanselka, Holger (2011):
Parameter study on an actively stabilised beam column.
In: 5th ECCOMAS Thematic Conference on Smart Structures and Materials SMART'11, Saarbrücken, Germany, July 6 - 8, 2011, [Conference or Workshop Item]

Koenen, Jan Felix and Platz, Roland and Hanselka, Holger (2011):
General approach and possibility to evaluate uncertainty in estimating loads on a beam.
In: ICEDyn 2011 International Conference on Structural Engineering Dynamics, Tavira, Portugal, 20.-22.06.2011, [Conference or Workshop Item]

Enss, Georg Christoph and Platz, Roland and Hanselka, Holger (2011):
A survey on uncertainty in the control of an active column critical to buckling.
In: ICEDyn 2011 International Conference on Structural Engineering Dynamics, Tavira, Portugal, 20.-22.06.2011, [Conference or Workshop Item]

Ondoua, Serge and Platz, Roland and Hanselka, Holger (2011):
A study on scatter in piezoelectric stackactuator characteristics as an uncertainty criterion in usage process of a load-carrying system.
In: ICEDyn 2011 International Conference on Structural Engineering Dynamics, Tavira, Portugal, 20.-22.06.2011, [Conference or Workshop Item]

Groche, Peter and Kraft, Matthias and Schmitt, Sebastian O. and Scheitza, Matthias (2011):
Market Demand Oriented Cold Forging with Multiple Point Servo Presses.
In: International Cold Forging Congress 2011, Stuttgart, Germany, 19.05.2011, [Conference or Workshop Item]

Ondoua, Serge and Platz, Roland and Nuffer, Jürgen and Hanselka, Holger (2011):
Unsicherheit in der Zuverlässigkeitsbewertung von aktiven Komponenten am Beispiel eines piezoelektrischen Stapelaktuators für eine aktive Knicktsabilisierung.
In: TTZ 2011: 25. Tagung Technische Zuverlässigkeit, Leonberg, Germany, 11.-12. Mai 2011, [Conference or Workshop Item]

Sprenger, André and Mosch, Lucia and Mecke, Kai and Anderl, Reiner (2011):
Representation of Uncertainty in Distributed Product Development.
In: 18th Annual European Concurrent Engineering Conference 2011, London, UK, 18.-20.04.2011, [Conference or Workshop Item]

Mathias, Johannes and Eifler, Tobias and Engelhardt, Roland and Kloberdanz, Hermann and Birkhofer, Herbert and Bohn, Andrea (2011):
Selection Of Physical Effects Based On Disturbances And Robustness Ratios In The Early Phases Of Robust Design.
Deutschland, In: ICED 11, Kopenhagen, Dänemark, 15.-18. Aug. 2011, [Conference or Workshop Item]

Engelhardt, Roland and Wiebel, Marion and Eifler, Tobias and Kloberdanz, Hermann and Birkhofer, Herbert and Bohn, Andrea (2011):
UMEA: A follow-up to analyse uncertainties in technical systems.
Deutschland, In: ICED 11, Kopenhagen, Dänemark, 15.-18. Aug. 2011, [Conference or Workshop Item]

Eifler, Tobias and Mathias, Johannes and Engelhardt, Roland and Kloberdanz, Hermann and Birkhofer, Herbert and Bohn, Andrea (2011):
Evaluation Of Solution Variants In Conceptual Design By Means Of Adequate Sensitivity Indices.
Deutschland, In: ICED 11, Kopenhagen, Dänemark, 15.-18. Aug. 2011, [Conference or Workshop Item]

Engelhardt, Roland and Eifler, Tobias and Mathias, Johannes and Kloberdanz, Hermann and Birkhofer, Herbert and Bohn, Andrea (2011):
Linkage Of Methods Within The UMEA Methodology: An approach to analyase uncertainties in the product development process.
Deutschland, In: ICED 11, Kopenhagen, Dänemark, 15.-18. Aug. 2011, [Conference or Workshop Item]

Eifler, Tobias and Engelhardt, Roland and Birkhofer, Herbert and Bohn, Andrea (2011):
Using DSM structures to analyze uncertainty in load-carrying systems.
In: 13th International Dependency and Structure Modelling Conference, DSM’11, Cambridge, Mass. USA, September 14 – 15, 2011, [Conference or Workshop Item]

Haydn, Michael and Hauer, Thomas and Abele, Eberhard
Hanselka, Holger and Groche, Peter and Platz, Roland (eds.) (2011):
Methods for the control of uncertainty in multilevel process chains using the example of drilling/reaming.
In: Proceedings of the 1st International Conference on Uncertainty in Mechanical Engineering (ICUME 2011) November 14-15, 2011, Darmstadt, Germany, pp. 103-113, ISBN-13 978-3-03785-261-3,, [Conference or Workshop Item]

Wiebel, Marion and Bohn, Andrea and Birkhofer, Herbert (2011):
Uncertainty Modeling in Technical Systems based on Possibility Theory.
In: 4th World Conference on Design Research - IASDR 2011, Delft, 30.10.2011 - 04.11.2011, [Conference or Workshop Item]

Ondoua, Serge and Platz, Roland and Nuffer, Jürgen and Hanselka, Holger (2010):
Uncertainties in Active Stabilisation of Buckling Columns on the Basis of Piezoelectric Materials.
In: 21st ICAST International Conference on Adaptive Structures and Technologies, State College, Pennsylvania/USA, 4-6 October 2010, [Conference or Workshop Item]

Enss, Georg Christoph and Platz, Roland and Hanselka, Holger (2010):
An Enhanced Approach to Control Stability in an Active Column Critical to Buckling.
In: ICAST 2010 - 21st International Conference on Adaptive Structures and Technologies, State College, Pennsylvania/USA, 4-6 October 2010, [Conference or Workshop Item]

Platz, Roland and Stapp, Christoph (2010):
Investigating the Potential of Piezoelectric Actuator Patches for the Reduction of Fatigue Crack Propagation in Aluminium Panels.
In: ICAST 2010 - 21st International Conference on Adaptive Structures and Technologies, State College, PA, USA, 04. - 06.10.2010, [Conference or Workshop Item]

Platz, Roland and Ondoua, Serge and Habermehl, Kai and Bedarff, T. and Hauer, Thomas and Schmitt, Sebastian O. and Hanselka, Holger (2010):
Approach to validate the influences of uncertainties in manufacturing on using load-carrying structures.
In: ISMA2010 International Conference on Noise and Vibration Engineering, Leuven/Belgium, 20-22 September 2010, [Conference or Workshop Item]

Koenen, Jan Felix and Platz, Roland and Hanselka, Holger (2010):
An Approach to Quantify the Influence of Uncertainties in Model-Based Monitoring of Load-Carrying Systems.
In: ISMA2010 International Conference on Noise and Vibration Engineering, Leuven/Belgium, 20-22 September 2010, [Conference or Workshop Item]

Enss, Georg Christoph and Platz, Roland and Hanselka, Holger (2010):
An Approach to Control the Stability in an Active Load-Carrying Beam-Column by One Single Piezoelectric Stack Actuator.
In: ISMA2010 International Conference on Noise and Vibration Engineering, Leuven/Belgium, 20-22 September 2010, [Conference or Workshop Item]

Mathias, J. and Kloberdanz, H. and Eifler, T. and Engelhardt, R. (2010):
Defining Production Processes in Early Phases Using "Solution Space Representatives".
In: norddesign 2010, Göteborg, Sweden, 25.08.2010, [Conference or Workshop Item]

Engelhardt, Roland and Koenen, Jan Felix and Enss, Georg Christoph and Sichau, Adrian and Platz, Roland and Kloberdanz, Hermann and Birkhofer, Herbert and Hanselka, Holger (2010):
A Model to Categorise Uncertainty in Load-Carrying Systems.
In: 1st MMEP International Conference on Modelling and Management Engineering Processes, Cambridge/UK, 19-20 July 2010, [Conference or Workshop Item]

Koenen, Jan Felix and Platz, Roland and Hanselka, Holger (2010):
A Survey to control Uncertainties by Comprehensive Monitoring of Loadcarrying Structures.
In: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, San Diego/USA, 7-11 March 2010, In: Proceedings, [Conference or Workshop Item]

Drewes, S. and Pokutta, S. (2010):
Cutting-planes for weakly-coupled 0/1 second order cone programs.
In: ISCO 2010-International Symposium of Combinatorial Optimization, Hammemet, Tunisia, [Conference or Workshop Item]

Groche, Peter and Türk, Markus (2010):
Integration of adaptive components by incremental forming processes.
In: SPIE Smart Structures/NDE—For the Latest Research on Smart Sensors, NDE, Aerospace Systems, Energy Harvesting, USA, San Diego, [Conference or Workshop Item]

Engelhardt, R. and Wiebel, M. and Kloberdanz, H. and Birkhofer, H. (2010):
A Model to Analyse Uncertainties on Stakeholders’ Evaluations in Technical Systems.
In: TMCE - International Symposium series on Tools and Methods of Competitive Engineering, Ancona, Italy, 12.-16.04.2010, [Conference or Workshop Item]

Engelhardt, R. and Kloberdanz, H. and Mathias, J. and Birkhofer, H. (2010):
An Approach of a model to describe Uncertainties in Technical Systems.
In: Design 2010, Dubrovnik, Croatia, 17.05.2010, [Conference or Workshop Item]

Mathias, J. and Kloberdanz, H. and Engelhard, R. and Birkhofer, H. (2010):
Strategies and principles to design robust products.
In: Design 2010, Dubrovnik, Croatia, 17.-20.05.2010, [Conference or Workshop Item]

Eifler, T. and Engelhardt, R. and Mathias, J. and Kloberdanz, H. and Birkhofer, H. (2010):
An Assignment of Methods to analyse Uncertainty in different stages of the Development Process.
In: Proceedings of International Mechanical Engineering Congress & Exposition, Vancouver, Canada, 12.-18.11.2010, [Conference or Workshop Item]

Groche, Peter and Scheitza, Matthias and Kraft, Matthias and Schmitt, Sebastian O. (2010):
Increased Process Flexibility by 3D Servo Press.
In: CIRP 2010, Wien, Austria, 13.04.2010, [Conference or Workshop Item]

Raedt, Hans-Willi and Groche, Peter and Grupp, Philipp and Heimbürger, Gerd and Koppensteiner, Robert and Müller, Frank and Nillies, Benedikt and Rauschnabel, Eberhard and Röttger, Karsten and Strehmel, Peter and Türk, Markus and Görtan, Okan (2010):
Recent Developments in Incremental Bulk Metal Forming.
In: Proceedings of 43rd International Cold Forging Group (ICFG) Plenary Meeting, Darmstadt, Germany, 12.-14.09.2010, [Conference or Workshop Item]

Anderl, Reiner and Mosch, Lucia and Mecke, Kai and Sprenger, André (2010):
Beherrschung von Unsicherheit von lasttragenden Systemen im Maschinenbau durch Ontologie-basierte Informationsverar- beitung und Visualisierungstechnik.
In: KT 2010 - Kolloquium Konstruktionstechnik, Magdeburg, Germany, 08.10.2010, [Conference or Workshop Item]

Gräbener, T. and Groche, P. and Kraft, M. (2010):
Recent Developments in Servopress Technology and their Applications in Cold Forging Processes.
In: 43rd ICFG Plenary Meeting 2010, Darmstadt, Germany, 12.-15.10.2010, [Conference or Workshop Item]

Clever, Debora and Lang, Jens and Ulbrich, Stefan and Ziems, Jan (2010):
Combination of an Adaptive Multilevel SQP Method and a Space-Time Adaptive PDAE Solver for Optimal Control Problems.
In: Procedia Computer Science, [Conference or Workshop Item]

Wiebel, Marion and Engelhardt, Roland and Habermehl, K. and Birkhofer, Herbert (2010):
Uncertainty in process chains and the calculations of their propagation via Monte-Carlo simulation.
In: 12th International Dependency and Structure Modelling Conference, DSM’10, Cambridge, UK, 22 – 23 July 2010, [Conference or Workshop Item]

Anderl, R. and Mecke, K. and Sprenger, A. and Weitzmann, O. J. (2010):
Ontology-Based System for supporting the containment of uncertainty in the product lifecycle.
In: TMCE - International Symposium series on Tools and Methods of Competitive Engineering, Ancona, Italy, 12.-16.04.2010, [Conference or Workshop Item]

Lorenz, U. and Martin, A. and Wolf, J. (2010):
Polyhedral and algorithmic properties of Quantified Linear Programs.
In: ESA-European Symposia on Algorithms, Liverpool, UK, 06.-08.09.2010, [Conference or Workshop Item]

Engelhardt, R. and Birkhofer, H. and Kloberdanz, H. and Mathias, J. (2009):
Uncertainty-Mode-And-Effects-Analysis-An Approach to analyse and estimate Uncertainty in the Product Life Cycle.
In: ICED-International Conference on Engineering Design, Stanford, USA, 24.08.2009, [Conference or Workshop Item]

Platz, Roland and Janssen, Enrico (2009):
Mechatronische Stabilisierung knickgefährdeter Stäbe in lasttragenden Systemen des Maschinenbaus.
In: Proceedings of VDI-Tagung Mechatronik 2009, Wiesloch bei Heidelberg/Germany, [Conference or Workshop Item]

Mathias, Johannes and Kloberdanz, Hermann and Engelhardt, Roland and Birkhofer, Herbert (2009):
Integrated Product and Process Development based on Robust Design Methodology.
In: ICED-International Conference on Engineering Design, Stanford, USA, 24.08.2009, [Conference or Workshop Item]

Kloberdanz, H. and Engelhardt, R. and Mathias, J. and Birkhofer, H. (2009):
Process Based Uncertainty Analysis - An Approach to analyse Uncertainties using a Process Model.
In: ICED-International Conference on Engineering Design, Stanford, USA, 24.08.2009, [Conference or Workshop Item]

Mecke, Kai and Sprenger, André and Weitzmann, Oliver and Anderl, Reiner
Dietz, Jan L. G. (ed.) (2009):
Ontology Support for Product Development - Successful Application of Ontologies in Product Development.
In: KEOD 2009 - Proceedings of the International Conference on Know ledge Engineering and Ontology Development, In: KEOD, [Conference or Workshop Item]

Report

Gleixner, Ambros M. and Bastubbe, Michael and Eifler, Leon and Gally, Tristan and Gamrath, Gerald and Gottwald, Robert L. and Hendel, Gregor and Hojny, Christoper and Koch, Thorsten and Lübbecke, Marco E. and Maher, Stephen J. and Miltenberger, Matthias and Müller, Benjamin and Pfetsch, Marc E. and Puchert, Christian and Rehfeldt, Daniel and Schlösser, Franziska and Schubert, Christoph and Serrano, Felipe and Shinano, Yuji and Viernickel, Jan Merlin and Walter, Matthias and Wegscheider, Fabian and Witt, Jonas T. and Witzig, Jakob (2018):
The SCIP Optimization Suite 6.0.
Berlin, Zuse Institute Berlin, In: ZIB-Report, (26), ISSN 1438-0064,
[Online-Edition: https://opus4.kobv.de/opus4-zib/frontdoor/index/index/docId/...],
[Report]

Gleixner, Ambros M. and Eifler, Leon and Gally, Tristan and Gamrath, Gerald and Gemander, Patrick and Gottwald, Robert L. and Hendel, Gregor and Hojny, Christoper and Koch, Thorsten and Miltenberger, Matthias and Müller, Benjamin and Pfetsch, Marc E. and Puchert, Christian and Rehfeldt, Daniel and Schlösser, Franziska and Serrano, Felipe and Shinano, Yuji and Viernickel, Jan Merlin and Vigerske, Stefan and Weninger, Dieter and Witt, Jonas T. and Witzig, Jakob (2017):
The SCIP Optimization Suite 5.0.
Berlin, In: ZIB Report, (61), [Online-Edition: https://opus4.kobv.de/opus4-zib/frontdoor/index/index/docId/...],
[Report]

Maher, Stephen J. and Fischer, Tobias and Gally, Tristan and Gamrath, Gerald and Gleixner, Ambros M. and Gottwald, Robert L. and Hendel, Gregor and Koch, Thorsten and Lübbecke, Marco E. and Miltenberger, Matthias and Müller, Benjamin and Pfetsch, Marc E. and Puchert, Christian and Rehfeldt, Daniel and Schenker, Sebastian and Schwarz, Robert and Serrano, Felipe and Shinano, Yuji and Weninger, Dieter and Witt, Jonas T. and Witzig, Jakob (2017):
The SCIP Optimization Suite 4.0.
In: ZIB-Report, (12), [Online-Edition: https://opus4.kobv.de/opus4-zib/frontdoor/index/index/docId/...],
[Report]

Gamrath, Gerald and Fischer, Tobias and Gally, Tristan and Gleixner, Ambros M. and Hendel, Gregor and Koch, Thorsten and Maher, Stephen J. and Miltenberger, Matthias and Müller, Benjamin and Pfetsch, Marc E. and Puchert, Christian and Rehfeld, Daniel and Schenker, Sebastian and Schwarz, Robert and Serrano, Felipe and Shinano, Yuji and Vigerske, Stefan and Wenninger, Dieter and Winkler, Michael and Witt, Jonas T. and Witzig, Jakob (2016):
The SCIP Optimization Suite 3.2.
[Online-Edition: https://opus4.kobv.de/opus4-zib/frontdoor/index/index/docId/...],
[Report]

Bedarff, T. and Pelz, P. F. (2011):
Design and Prove of Concept of an Innovative Active Fluid Suspension System.
In: VDI-Berichte 2138, 283-294, 2011, [Online-Edition: http://www.fst.tu-darmstadt.de/media/fachgebiet_fst/dokument...],
[Report]

Ph.D. Thesis

Schäffner, Maximilian Frederic (2019):
Quantification and evaluation of uncertainty in active buckling control of a beam-column subject to dynamic axial loads.
Darmstadt, Technische Universität, [Online-Edition: https://tuprints.ulb.tu-darmstadt.de/8652],
[Ph.D. Thesis]

Bölling, Christian (2019):
Simulationsbasierte Auslegung mehrstufiger Werkzeugsysteme zur Bohrungsfeinbearbeitung am Beispiel der Ventilführungs- und Ventilsitzbearbeitung.
Aachen, Shaker Verlag, TU Darmstadt, In: Schriftenreihe des PTW: "Innovation Fertigungstechnik", ISBN 978-3-8440-6392-9,
[Ph.D. Thesis]

Götz, Benedict (2019):
Evaluation of uncertainty in the vibration attenuation with shunted piezoelectric transducers integrated in a beam-column support.
Darmstadt, Technische Universität, [Online-Edition: https://tuprints.ulb.tu-darmstadt.de/8608],
[Ph.D. Thesis]

Lotz, Julian (2018):
Beherrschung von Unsicherheit in der Baureihenentwicklung.
Darmstadt, Technische Universität, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/7282],
[Ph.D. Thesis]

Würtenberger, Jan (2018):
Ein Beitrag zur Identifikation und Beherrschung von Unsicherheit bei der Modellierung technischer Systeme.
Darmstadt, Technische Universität, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/7348],
[Ph.D. Thesis]

Freund, Tillmann (2018):
Konstruktionshinweise zur Beherrschung von Unsicherheit in technischen Systemen.
Darmstadt, Technische Universität, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/7231],
[Ph.D. Thesis]

Hedrich, P. (2018):
Konzeptvalidierung einer aktiven Luftfederung im Kontext autonomer Fahrzeuge.
Aachen, Shaker Verlag GmbH, TU Darmstadt, ISBN 978-3-8440-6299-1,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/Dissertationen/diss_181106_...],
[Ph.D. Thesis]

Bedarff, Thomas (2017):
Grundlagen der Entwicklung und Untersuchung einer aktiven Luftfeder für Personenkraftwagen.
Aachen, Shaker Verlag, TU Darmstadt, In: Forschungsberichte zur Fluidsystemtechnik, 10, ISBN 978-3-8440-5214-5,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/Dissertationen/diss_160000_...],
[Ph.D. Thesis]

Kristl, Lisa (2017):
Nichtparametrische Schätzung zeitvarianter Dichten und zeitvarianter Quantile in einem Simulationsmodell.
München, Verlag Dr. Hut, TU Darmstadt, In: Mathematik, ISBN 978-3-8439-3262-2,
[Ph.D. Thesis]

Oberle, Marius (2017):
Development of a Method for the Characterization, Assessment and Control of Human Induced Uncertainty During Usage.
Darmstadt, Technische Universität, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/6837],
[Ph.D. Thesis]

Calmano, Stefan (2017):
Methodik zur Regelung von Bauteileigenschaften in Umformprozessen.
Aachen, Shaker Verlag, TU Darmstadt, In: Berichte aus Produktion und Umformtechnik, 108, ISBN 9783844054446,
[Ph.D. Thesis]

Güth, Sebastian (2016):
Simulationsbasierte Entgratwerkzeugentwicklung für Kreuzbohrungen.
Aachen, Shaker Verlag, TU Darmstadt, In: Schriftenreihe des PTW: "Innovation Fertigungstechnik", ISBN 978-3-8440-4771-4,
[Ph.D. Thesis]

Altherr, Lena C. (2016):
Algorithmic system design under consideration of dynamic processes.
Aachen, Shaker Verlag, TU Darmstadt, In: Forschungsberichte zur Fluidsystemtechnik, 11, ISBN 978-3-8440-4848-3,
[Online-Edition: http://wl.fst.tu-darmstadt.de/wl/Dissertationen/diss_160419_...],
[Ph.D. Thesis]

Brenneis, Matthias (2016):
Methoden zur umformenden Herstellung sensorischer Tragstrukturen mit in situ vorgespannten Sensoren.
Aachen, Shaker Verlag, TU Darmstadt, In: Berichte aus Produktion und Umformtechnik, 103, ISBN 978-3-8440-4730-1,
[Ph.D. Thesis]

Enss, Georg Christoph (2016):
Beherrschung von Unsicherheit am Beispiel eines aktiv gegen Knicken stabilisierten Systems.
Darmstadt, Technische Universität, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/5176],
[Ph.D. Thesis]

Heß, Benjamin (2016):
Präzise Kaltmassivumformung für die Herstellung von Verzahnungen mittels oszillierendem Verzahnungseindrücken durch optimierte Reibverhältnisse.
Aachen, Shaker Verlag, TU Darmstadt, In: Berichte aus Produktion und Umformtechnik, 99, ISBN 978-3-8440-4605-2,
[Ph.D. Thesis]

Mathias, Johannes (2016):
Auf dem Weg zu robusten Lösungen : Modelle und Methoden zur Beherrschung von Unsicherheit in den frühen Phasen der Produktentwicklung.
Düsseldorf, VDI Verlag GmbH, TU Darmstadt, In: Fortschritt-Berichte VDI. Reihe 1 Konstruktionstechnik/Maschinenelemente, 435, ISBN 978-3-18-343501-2,
[Ph.D. Thesis]

Ondoua Ebengué, Serge Parfait (2016):
Beschreibung und Bewertung der Unsicherheit in der Ermittlung der Stellkräfte und -wege von piezoelektrischen Stapelaktuatoren in aktiven lasttragenden Systemen.
Darmstadt, Technische Universität Darmstadt, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/5675],
[Ph.D. Thesis]

Schmitt, Sebastian O. (2015):
Vorgehensmodell der realen iterativen Produktentwicklung.
Aachen, Shaker, TU Darmstadt, In: Berichte aus Produktion und Umformtechnik ; 98, ISBN 978-3-8440-3907-8,
[Ph.D. Thesis]

Mosch, Lucia (2015):
Auswirkung unsicherheitsbehafteter Bauteilattribute auf funktionale Eigenschaften.
Aachen, Shaker, TU Darmstadt, In: Forschungsberichte aus dem Fachgebiet Datenverarbeitung in der Konstruktion ; 52, ISBN 978-3-8440-3840-X,
[Ph.D. Thesis]

Eifler, Tobias (2015):
Modellgestützte Methodik zur systematischen Analyse von Unsicherheit im Lebenslauf technischer Systeme.
Düsseldorf, VDI-Verl., TU Darmstadt, In: Fortschrittberichte VDI : Reihe 1, Konstruktionstechnik, Maschinenelemente ; 432, ISBN 978-3-18-343201-1,
[Ph.D. Thesis]

Wolf, Jan (2015):
Quantified linear programming.
Aachen, Shaker, TU Darmstadt, In: Forschungsberichte zur Fluidsystemtechnik ; Bd. 7, ISBN 978-3-8440-3720-3,
[Ph.D. Thesis]

Sichau, Adrian (2014):
Robust nonlinear programming with discretized PDE constraints using second-order approximations.
München, Dr. Hut, TU Darmstadt, ISBN 978-3-8439-1644-8,
[Ph.D. Thesis]

Avemann, Jörg Heinz (2014):
Identifikation und Bewertung von Prozessintegrationen.
Herzogenrath, Shaker, TU Darmstadt, In: Berichte aus Produktion und Umformtechnik ; 92 , ISBN 978-3-844-3101-0,
[Ph.D. Thesis]

Habermehl, Kai (2013):
Robust Optimization of Active Trusses via Mixed-Integer Semidefinite Programming.
Darmstadt, Dr. Hut, TU Darmstadt, ISBN 078-3-8439-1702-5,
[Ph.D. Thesis]

Mars, Sonja (2013):
Mixed-Integer Semidefinite Programming with an Application to Truss Topology Design.
München, Verlag Dr. Hut, Friedrich-Alexander-Universität Erlangen-Nürnberg, [Ph.D. Thesis]

Felber, Tina (2013):
Universell L1-konsistente Schätzung der Dichte der Fehler in einem Regressionsmodell und einer stationär ergodischen Zeitreihe.
Aachen, Shaker-Verlag, TU Darmstadt, [Ph.D. Thesis]

Sprenger, André (2013):
Kollaboratives, ontologiebasiertes System zur Integration von unsicherheitsbehafteten Prozesseigenschaften in der Produktentwicklung.
Aachen, Shaker, TU Darmstadt, In: Forschungsberichte aus dem Fachgebiet Datenverarbeitung in der Konstruktion ; 43, ISBN 978-3-8440-2025-0,
[Ph.D. Thesis]

Engelhardt, Roland Alexander (2012):
Uncertainty Mode and Effects Analysis - heuristische Methodik zur Analyse und Beurteilung von Unsicherheiten in technischen Systemen des Maschinenbaus.
Düsseldorf, VDI-Verlag, TU Darmstadt, [Ph.D. Thesis]

Mecke, Kai (2012):
Ontologiebasierte Repräsentation und Verarbeitung von Information bezüglich Unsicherheit in der virtuellen Produktentwicklung.
Aachen, Shaker, TU Darmstadt, In: Forschungsberichte aus dem Fachgebiet Datenverarbeitung in der Konstruktion ; 41, ISBN 978-3-8440-0901-9,
[Ph.D. Thesis]

Hauer, Thomas (2012):
Modellierung der Werkzeugabdrängung beim Reiben – Ableitung von Empfehlungen für die Gestaltung von Mehrschneidenreibahlen.
erschienen in der Schriftenreihe des PTW: " Innovation Fertigungstechnik" im Shaker-Verlag, Aachen, zugl. Diss. TU Darmstadt, ISBN 978-3-8440-1549-2,
[Ph.D. Thesis]

Türk, Markus (2011):
Integration von Funktionswerkstoffen in metallische Tragstrukturen mittels inkrementeller Umvormverfahren.
Aachen, Shaker, TU Darmstadt, In: Berichte aus Produktion und Umformtechnik ; 85, ISBN 978-3-8440-0620-9,
[Ph.D. Thesis]

This list was generated on Sun Jun 16 01:48:43 2019 CEST.