TU Darmstadt / ULB / TUbiblio

Browse by Person

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Date | Language
Number of items: 271.

Pelz, P. F. ; Leise, Philipp ; Meck, Marvin (2021):
Sustainable aircraft design — A review on optimization methods for electric propulsion with derived optimal number of propulsors.
In: Progress in Aerospace Sciences, Elsevier, e-ISSN 0376-0421,
DOI: 10.1016/j.paerosci.2021.100714,
[Article]

Mehrnia, Seyedmajid ; Pelz, P. F. (2021):
Slip length of branched hydrocarbon oils confined between iron surfaces.
In: Journal of Molecular Liquids, 336, p. 116589. Elsevier, ISSN 0167-7322,
DOI: 10.1016/j.molliq.2021.116589,
[Article]

Leise, Philipp ; Eßer, Arved ; Eichenlaub, Tobias ; Schleiffer, J.-E. ; Altherr, Lena C. ; Rinderknecht, Stephan ; Pelz, P. F. (2021):
Sustainable system design of electric powertrains - comparison of optimization methods.
In: Engineering Optimization, Taylor & Francis, ISSN 0305-215X,
DOI: 10.1080/0305215X.2021.1928660,
[Article]

Pelz, P. F. (2020):
Good Engineering Design – Design Evolution by Languages.
In: Technology and Language, 1 (1), Peter the Great St. Petersburg Polytechnic University, DOI: 10.48417/technolang.2020.01.20,
[Article]

Leise, Philipp ; Breuer, Tim ; Altherr, Lena C. ; Pelz, P. F.
Comes, Tina ; Hölscher, Christoph (eds.) (2020):
Development, Validation and Assessment of a Resilient Pumping System.
In: Proceedings of the Joint International Resilience Conference, JIRC2020, pp. 97-100,
Twente, University of Twente, Joint International Resilience Conference, online, 23.-27. Nov. 2020, ISBN 978-90-365-5095-6,
DOI: 10.3990/1.9789036550956,
[Conference or Workshop Item]

Brötz, N. ; Pelz, P. F.
Mao, Zhu (ed.) (2020):
Bayesian Uncertainty Quantification in the Development of a New Vibration Absorber Technology.
In: Conference Proceedings of the Society for Experimental Mechanics Series, In: Model Validation and Uncertainty Quantification ; Vol. 3, pp. 19-26,
Cham, Springer International Publishing, 38th IMAC, A Conference and Exposition on Structural Dynamics 2020, Houston, 10-13 February, 2020, ISBN 978-3-030-47638-0,
DOI: 10.1007/978-3-030-47638-0_2,
[Conference or Workshop Item]

Hartig, Jakob ; Hoppe, Florian ; Martin, Daniel ; Staudter, Georg ; Öztürk, Tuğrul ; Anderl, Reiner ; Groche, Peter ; Pelz, P. F. ; Weigold, Matthias
Mao, Zhu (ed.) (2020):
Identification of lack of knowledge using analytical redundancy applied to structural dynamic systems.
In: Conference Proceedings of the Society for Experimental Mechanics Series, In: Model Validation and Uncertainty Quantification ; Vol. 3, pp. 131-138,
Cham, Springer International Publishing, Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020, ISBN 978-3-030-48778-2,
DOI: 10.1007/978-3-030-47638-0_14,
[Conference or Workshop Item]

Müller, T. M. ; Leise, Philipp ; Lorenz, Imke ; Altherr, Lena C. ; Pelz, P. F. (2020):
Optimization and Validation of Pumping System Design and Operation for Water Supply in High-Rise Buildings.
In: Optimization and Engineering, 2020, pp. 1-43. Springer, ISSN 13894420,
DOI: 10.1007/s11081-020-09553-4,
[Article]

Henn, Katharina ; Friesen, John ; Hartig, Jakob ; Pelz, P. F. (2020):
Spatial Analysis of Settlement Structures to Identify Pattern Formation Mechanisms in Inter-Urban Systems.
In: ISPRS International Journal of Geo-Information, 9 (9), p. 541. MDPI, DOI: 10.3390/ijgi9090541,
[Article]

Friesen, John ; Pelz, P. F. (2020):
COVID-19 and Slums: A Pandemic Highlights Gaps in Knowledge About Urban Poverty.
In: JMIR Public Health and Surveillance, 6 (3), pp. e19578. ISSN 2369-2960,
DOI: 10.2196/19578,
[Article]

Meck, Marvin M. ; Müller, T. M. ; Altherr, Lena C. ; Pelz, P. F. (2020):
Improving an Industrial Cooling System Using MINLP, Considering Capital and Operating Costs.
In: Operations Research Proceedings 2019 : Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Dresden, Germany, September 4-6, 2019, pp. 505-512,
Cham, Springer, ISBN 978-3-030-48438-5 , 978-3-030-48438-5,
DOI: 10.1007/978-3-030-48439-2_61,
[Conference or Workshop Item]

Pelz, P. F. ; Ludwig, G. ; Dietrich, Ingo ; Müller, T. M. ; Nakhjiri, M. ; Schmitz, Christian (2020):
Kompakter, modularer Armaturenbaukasten.
[Standards, patents]

Brötz, N. ; Rexer, Manuel ; Pelz, P. F. (2020):
Fluid dynamic vibration absorber for cabin suspension.
In: 12th International Fluid Power Conference (12. IFK). Dresden, October 12 – 14, 2020,
DOI: 10.25368/2020.103,
[Conference or Workshop Item]

Rexer, Manuel ; Brötz, N. ; Pelz, P. F. (2020):
Much does not help much: 3D pareto front of safety, comfort and energy consumption for an active pneumatic suspension strut.
In: 12th International Fluid Power Conference (12. IFK). Dresden, October 12 – 14, 2020,
DOI: 10.25368/2020.91,
[Conference or Workshop Item]

Dietrich, Ingo ; Zinßer, Lukas ; Müller, T. M. ; Ludwig, Gerhard ; Pelz, P. F. (2020):
Rotor swivel motor as actuator of an innovative control valve.
12th International Fluid Power Conference (12. IFK), Dresden, Germany, 12.-14.10.2020, DOI: 10.25368/2020.117,
[Conference or Workshop Item]

Rexer, Manuel ; Kloft, Peter ; Bauer, Frank ; Hartig, Jakob ; Pelz, P. F. (2020):
Foam accumulators: packaging and weight reduction for mobile applications.
12th International Fluid Power Conference (12. IFK), Dresden, October 12 – 14, 2020, DOI: 10.25368/2020.26,
[Conference or Workshop Item]

Hartig, Jakob ; Schänzle, C. ; Pelz, P. F. (2020):
Validation of a soft sensor network for condition monitoring in hydraulic systems.
12th International Fluid Power Conference (12. IFK), Dresden, October 12 – 14, 2020, DOI: 10.25368/2020.80,
[Conference or Workshop Item]

Schänzle, C. ; Ludwig, G. ; Pelz, P. F. (2020):
Typenunabhängiges Wirkungsgradmodell erweist sich als gute Basis zur Effizienzbewertung von Verdrängerpumpen.
In: Pumpen und Kompressoren für den Weltmarkt 2020, pp. 24-28. VDMA Pumpen+Systeme, ISSN 2569-7609,
[Article]

Pelz, P. F. ; Metzler, M. ; Schmitz, Christian ; Müller, T. M. (2020):
Upper limit for tidal power with lateral bypass.
In: Journal of Fluid Mechanics, 889, pp. A32. Cambridge Journals Online, ISSN 0022-1120, e-ISSN 1469-7645,
DOI: 10.1017/jfm.2020.99,
[Article]

Friesen, John ; Friesen, Victoria ; Dietrich, Ingo ; Pelz, P. F. (2020):
Slums, Space, and State of Health—A Link between Settlement Morphology and Health Data.
In: International Journal of Environmental Research and Public Health, 17 (6), MDPI, ISSN 1660-4601,
DOI: https://doi.org10.3390/ijerph17062022,
[Article]

Hartig, Jakob ; Schänzle, C. ; Pelz, P. F. (2019):
Concept validation of a soft sensor network for wear detection in positive displacement pumps.
4th International Rotating Equipment Conference - Pumps and Compressors, Wiesbaden, Sep 24-25, 2019, [Conference or Workshop Item]

Müller, T. M. ; Leise, Philipp ; Meck, Tobias ; Altherr, Lena C. ; Pelz, P. F. (2019):
Systemic Optimization of Booster Stations - From Data Collection to Validation.
4th International Rotating Equipment Conference - Pumps and Compressors, Düsseldorf, 24.-25.09.2019, [Conference or Workshop Item]

Schänzle, C. ; Jost, K. ; Lemmer, J. ; Metzger, M. ; Ludwig, G. ; Pelz, P. F. (2019):
ERP Positive Displacement Pumps - Experimental Validation of a Type-Independent Efficiency Model.
Wiesbaden, 4th International Rotating Equipment Conference, Wiesbaden, 24.-25.09.2019, [Conference or Workshop Item]

Preuß, N. ; Schänzle, C. ; Pelz, P. F. (2019):
From notebooks to Data-Pipelines : The Darmstadt Approach to handling measurement data and metadata.
Wiesbaden, 4th International Rotating Equipment Conference, Wiesbaden, 24.-25.09.2019, [Conference or Workshop Item]

Kuhr, M. M. G. ; Robrecht, R. M. ; Ludwig, G. ; Pelz, P. F. (2019):
Measuring and simulation of fluid forces in annular gaps – Generic experiments cover-ing the relevant parameter range for turbulent and laminar flow in pumps.
Wiesbaden, 4th International Rotating Equipment Conference - Pumps and Compressors, Wiesbaden, Sep 24-25, [Conference or Workshop Item]

Meck, Marvin ; Rausch, L. ; Friesen, John ; Wurm, Michael ; Taubenböck, Hannes ; Altherr, Lena ; Pelz, P. F.
Fortz, Bernard ; Labbé, Martine (eds.) (2019):
Designing a Water Supply Network for Slums in Rio de Janeiro Using Mixed-Integer Programming.
In: Operations Research Proceedings 2018: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR) : September 12-14, 2018, Brussels, Belgium, pp. 347-354,
Springer Nature Switzerland AG, ISBN 978-3-030-18500-8,
DOI: 10.1007/978-3-030-18500-8_43,
[Conference or Workshop Item]

Lorenz, Imke ; Altherr, Lena C. ; Pelz, P. F. (2019):
Graph-Theoretical Resilience Analysis of Water Distribution Systems - A Case Study for the German City of Darmstadt.
In: World Congress on Resilience, Reliability and Asset Management 2019, pp. 106-109,
Singapur, World Congress on Resilience, Reliability and Asset Management 2019, Singapur, 28.-31. Juli 2019, [Conference or Workshop Item]

Robrecht, R. M. ; Kuhr, Maximilian ; Pelz, P. F. (2019):
CAPM vs. Bulk Flow - reliable and efficient prediction of forces and leakage for annular gaps in pumps.
4th International Rotating Equipment Conference, Wiesbaden, 24.09-25-09.2019, [Conference or Workshop Item]

Leise, Philipp ; Altherr, Lena C. ; Simon, Nicolai ; Pelz, P. F.
Le Thi, H. ; Le, H. ; Pham Dinh, T. (eds.) (2019):
Finding Global-Optimal Gearbox Designs for Battery Electric Vehicles.
In: Advances in Intelligent Systems and Computing, 991, In: Optimization of Complex Systems - Theory, Models, Algorithms and Applications : WCGO 2019, pp. 916-925, Springer Cham, DOI: 10.1007/978-3-030-21803-4_91,
[Book Section]

Cloos, F.-J. ; Pelz, P. F. (2019):
Experimental Investigation of the Swirl Development at the Inlet of a Coaxial Rotating Diffuser or Nozzle.
In: Journal of Fluids Engineering, 141, pp. 041107. ASME, ISSN 0098-2202,
DOI: 10.1115/1.4042095,
[Article]

Friesen, John ; Hannes, Taubenböck ; Wurm, Michael ; Pelz, P. F. (2019):
Size distributions of slums across the globe using different data and classification.
In: European Journal of Remote Sensing, DOI: 10.1080/22797254.2019.1579617,
[Article]

Pelz, P. F. ; Friesen, John ; Hartig, Jakob (2019):
Similar size of slums caused by a Turing instability of migration behavior.
In: Physical Review E, 99, pp. 022302. American Physical Society, DOI: 10.1103/PhysRevE.99.022302,
[Article]

Taubert, Paul ; Buttenbender, Johannes ; Pelz, P. F. (2019):
Modelling a torus cloud employing the van Wijngaarden Ansatz and the Gilmore equation.
In: IOP Conference Series: Earth and Environmental Science, 405, pp. 012001. ISSN 1755-1315,
DOI: 10.1088/1755-1315/405/1/012001,
[Article]

Müller, T. M. ; Altherr, L. C. ; Ahola, Marja Birgit ; Schabel, Samuel ; Pelz, P. F.
Multi-Criteria Optimization of Pressure Screen Systems in Paper Recycling — Balancing Quality, Yield, Energy Consumption and System Complexity.
In: EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization, pp. 1216-1228. Springer International Publishing, DOI: 10.1007/978-3-319-97773-7_105,
[Article]

Müller, T. M. ; Altherr, L. C. ; Ahola, Marja Birgit ; Schabel, Samuel ; Pelz, P. F.
Fortz, Bernard ; Labbé, Martine (eds.) (2019):
Optimizing Pressure Screen Systems in Paper Recycling: Optimal System Layout, Component Selection and Operation.
In: Operations Research Proceedings 2018: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR),
Cham, Springer Nature Switzerland AG, Annual International Conference of the German Operations Research Society (GOR), Brussels, Belgium, September 12-14, 2018, ISBN 978-3-030-18499-5,
DOI: 10.1007/978-3-030-18500-8_44,
[Conference or Workshop Item]

Friesen, John ; Tessmann, Ruben ; Pelz, P. F.
Grueau, Cédric ; Laurini, Robert ; Ragia, Lemonia (eds.) (2019):
Reaction-diffusion Model Describing the Morphogenesis of Urban Systems in the US.
1, In: Proceedings of the 5th International Conference on Geographical Information Systems Theory, Applications and Management, pp. 88-96, Setúbal, Portugal, SciTePress, ISBN 978-989-758-371-1,
DOI: 10.5220/0007711300880096,
[Book Section]

Friesen, John ; Knoche, Christoph ; Hartig, Jakob ; Pelz, P. F. ; Taubenböck, Hannes ; Wurm, Michael (2019):
Sensitivity of slum size distributions as a function of spatial parameters for slum classification.
In: 2019 Joint Urban Remote Sensing Event (JURSE), 22-24 May 2019, pp. 1-4,
Vannes, Frankreich, DOI: 10.1109/JURSE.2019.8808944,
[Conference or Workshop Item]

Friesen, John ; Lestakova, Michaela ; Kaltenmorgen, Jens ; Nahaganeshan, Suwaythan ; Pelz, P. F. ; Taubenböck, Hannes ; Wurm, Michael (2019):
Size Distributions for Morphological Slums in Asia and South America.
In: 2019 Joint Urban Remote Sensing Event (JURSE), 22-24 May 2019, pp. 1-4,
Vannes, Frankreich, DOI: 10.1109/JURSE.2019.8809017,
[Conference or Workshop Item]

Friesen, John ; Taubenböck, Hannes ; Wurm, Michael ; Pelz, P. F. (2019):
Size distributions of slums across the globe using different data and classification methods.
In: European Journal of Remote Sensing, pp. 1-13. Taylor & Francis, ISSN 2279-7254,
DOI: 10.1080/22797254.2019.1579617,
[Article]

Hartig, Jakob ; Friesen, John ; Pelz, P. F. (2019):
Spatial relations of slums: size of slum clusters.
In: 2019 Joint Urban Remote Sensing Event (JURSE), 22-24 May 2019, pp. 1-4,
Vannes, Frankreich, DOI: 10.1109/JURSE.2019.8809051,
[Conference or Workshop Item]

Tiessen, Thomas ; Friesen, John ; Rausch, L. ; Pelz, P. F. (2019):
Using remote sensing data and cluster algorithms to structure cities.
In: 2019 Joint Urban Remote Sensing Event (JURSE), 22-24 May 2019, pp. 1-4,
Vannes, Frankreich, DOI: 10.1109/JURSE.2019.8808973,
[Conference or Workshop Item]

Altherr, Lena C. ; Brötz, N. ; Dietrich, Ingo ; Gally, Tristan ; Geßner, Felix ; Kloberdanz, Hermann ; Leise, Philipp ; Pelz, P. F. ; Schlemmer, Pia Dorothea ; Schmitt, Andreas (2018):
Resilience in Mechanical Engineering - A Concept for Controlling Uncertainty during Design, Production and Usage Phase of Load-Carrying Structures.
In: Applied Mechanics and Materials, Uncertainty in Mechanical Engineering III, Trans Tech Publications, Switzerland, 885, pp. 187-198. ISSN 1662-7482,
[Article]

Rausch, L. ; Pelz, P. F. (2018):
Optimizing water supply networks for slums in urban areas.
MIT Water Summit 2018: Thirsty Cities, Massachusetts Institute of Technology, Cambridge, USA, 15./16. November 2018, [Conference or Workshop Item]

Schmitz, Christian ; Studenroth, Marcel ; Pelz, P. F. (2018):
Optimal operation of turbine cascades in tidal flows.
In: Proceedings of the 20th International Seminar on Hydropower Plants, [Article]

Pelz, P. F. ; Groche, Peter (eds.) (2018):
Uncertainty in Mechanical Engineering III.
International Conference on Uncertainty in Mechanical Engineering, Darmstadt, ISBN 978-3-0357-1310-7,
DOI: 10.4028/www.scientific.net/AMM.885,
[Conference or Workshop Item]

Kuhr, Maximilian ; Corneli, T. ; Pelz, P. F. (2018):
Reduction of Bearing Load Capacity and Increase in Volume Flow Due to Wall Slip.
In: Proceedings of the 20th International Sealing Conference, pp. 569-579, Stuttgart, ISBN 978-3-8163-0727-3,
[Book Section]

Ritter, Bastian ; Schmitz, Christian ; Pelz, P. F. (2018):
Control-oriented Modelling and State Estimation of Tidal Turbines with Pitch Control.
In: 20th International Seminar on Hydropower Plants, TU Wien, 14. - 16. November 2018 : celebrating 40 years of industry-academic engagement,
Wien, ISBN 9-783-9504338-1-4,
[Conference or Workshop Item]

Pelz, P. F. ; Taubert, Paul (2018):
Vortex-Induced Transient Stall.
In: Archive of Applied Mechanics, pp. 1-6. Springer, ISSN 1432-0681,
DOI: 10.1007/s00419-018-1468-5,
[Article]

Altherr, Lena C. ; Ederer, T. ; Pfetsch, Marc E. ; Pelz, P. F. (2018):
Maschinelles Design eines optimalen Getriebes.
In: ATZ - Automobiltechnische Zeitschrift (2018), 120 (10), pp. 72-77. DOI: 10.1007/s35148-018-0131-3,
[Article]

Schänzle, C. ; Störmer, Nils ; Pelz, P. F. (2018):
Modeling the efficiency of external gear pumps based on similarity considerations.
In: Proceedings of the BATH/ASME Symposium on Fluid Power and Motion Control - 2018, p. 8928,
New York, The American Society of Mechanical Engineers, BATH/ASME 2018 Symposium on Fluid Power and Motion Control, Bath, United Kingdom, September 12-14, 2018, ISBN 978-0-7918-5196-8,
DOI: 10.1115/FPMC2018-8928,
[Conference or Workshop Item]

Schänzle, C. ; Corneli, T. ; Pelz, P. F.
Brümmer, Andreas (ed.) (2018):
A similarity based efficiency model of spindle screw pumps.
In: IOP conference series : Materials science and engineering, 425, In: International Conference on Screw Machines (ICSM) 2018, pp. 012020,
Bristol, IOP Publishing, International Conference on Screw Machines (ICSM), Dortmund, 18-19 September 2018, ISBN 978-1-5108-7507-4,
DOI: 10.1088/1757-899X/425/1/012020,
[Conference or Workshop Item]

Schmitz, Christian ; Krämer, D. ; Pelz, P. F. (2018):
Multipole optimization of turbine arrays in tidal flows.
In: 29th IAHR Symposium on Hydraulic Machinery and Systems, [Article]

Friesen, John ; Rausch, L. ; Pelz, P. F. ; Fürnkranz, Johannes (2018):
Determining Factors for Slum Growth with Predictive Data Mining Methods.
In: Urban Science, 2 (3), p. 81. DOI: 10.3390/urbansci2030081,
[Article]

Rausch, L. ; Friesen, John ; Pelz, P. F. (2018):
Design of water supply networks and source selection for slums by using mixed-integer programming.
EURO 2018 - 29th European Conference on Operational Research, Valencia (Spanien), 08. Juli 2018, [Conference or Workshop Item]

Pelz, P. F. ; Kuhr, Maximilian (2018):
Interface instability of an inelastic normal collision.
In: Archive of Applied Mechanics, 88, pp. 1945-1951. Springer, DOI: 10.1007/s00419-018-1420-8,
[Article]

Pelz, P. F. ; Cloos, F.-J. ; Sieber, Jörg (2018):
Energetic assessment of an embedded aircraft propulsion: an analytic approach.
In: Archive of Applied Mechanics, Springer Berlin Heidelberg, DOI: 10.1007/s00419-018-1417-3,
[Article]

Hedrich, P. ; Lenz, Eric ; Pelz, P. F. (2018):
Minimierung von Kinetose beim autonomen Fahren.
In: ATZ - Automobiltechnische Zeitschrift, 120 (7-8), pp. 70-75. DOI: 10.1007/s35148-018-0077-5,
[Article]

Hedrich, P. ; Lenz, Eric ; Pelz, P. F. (2018):
Minimizing of Kinetosis during Autonomous Driving.
In: ATZ Woldwide, 120 (7-8), pp. 68-75. DOI: 10.1007/s38311-018-0081-0,
[Article]

Lenz, Eric ; Hedrich, P. ; Pelz, P. F. (2018):
Aktive Luftfederung – Modellierung, Regelung und Hardware-in-the-Loop-Experimente.
In: Forschung in Ingenieurwesen, 82 (3), pp. 1-15. ISSN 0015-7899,
DOI: 10.1007/s10010-018-0272-2,
[Article]

Groß, T. F. ; Pelz, P. F. (2018):
Axiomatisches Modell für die Bildung von freiem Gas in Hydrauliksystemen.
In: O+P – Ölhydraulik und Pneumatik, [Article]

Pelz, P. F. ; Saul, Sebastian ; Doberstein, Christopher (2018):
Extended Rankine-Betz Theory for Design of Tunnel Ventilation Systems.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Article]

Saul, Sebastian ; Pelz, P. F. (2018):
Extended Scaling Method for Nonsimilarity in Reynolds Number, Stagger Angle and Blade Number.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Article]

Saul, Sebastian ; Matyschok, B. ; Pelz, P. F. (2018):
Fan Model Test at Varying Ambient Pressure - Efficient Product Validation at Full Scale Reynolds and Mach Number.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Article]

Preuß, N. ; Pelz, P. F. (2018):
Integrated Management of Experimental Research- and Meta-Data for Fan Test Rigs.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Article]

Ludwig, G. ; Taubert, Paul ; Pelz, P. F. (2018):
The Role of Universities Within the Qualification and Verification Process of EuP Requirements for Turbomachines using the Example of Rotodynamics Pumps.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Article]

Schmitz, Christian ; Nakhjiri, M. ; Pelz, P. F. (2018):
Softsensor for the characterisation of the process fluid.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Article]

Taubert, Paul ; Pelz, P. F. (2018):
Structure and Kinematics of the Vortex System in Axial Turbomachines.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Article]

Leise, Philipp ; Altherr, Lena C. ; Pelz, P. F. (2018):
Technical Operations Research (TOR) - Algorithms, not Engineers, Design Optimal Energy Efficient and Resilient Cooling Systems.
In: FAN2018 - Proceedings of the International Conference on Fan Noise, Aerodynamics, Applications and Systems - Darmstadt 2018, [Article]

Pelz, P. F. ; Dietrich, Ingo ; Schänzle, C. ; Preuß, N. (2018):
Towards digitalization of hydraulic systems using soft sensor networks.
In: 11th International Fluid Power Conference, pp. 40-53,
[Conference or Workshop Item]

Preuß, N. ; Schänzle, C. ; Pelz, P. F. (2018):
Accumulators with sorbent material – an innovative approach towards size and weight reduction.
In: 11th International Fluid Power Conference, pp. 504-517,
[Conference or Workshop Item]

Hedrich, P. ; Lenz, Eric ; Brötz, N. ; Pelz, P. F. (2018):
Active Pneumatic Suspension for Future Autonomous Vehicles: Design, Prove of Concept and Hardware-in-the-Loop Simulations.
In: 11th International Fluid Power Conference, pp. 352-365,
[Conference or Workshop Item]

Terwort, A. ; Groß, T. F. ; Pelz, P. F. (2018):
Bubble nucleation in hydraulic systems.
In: 11th International Fluid Power Conference,
[Conference or Workshop Item]

Brötz, N. ; Hedrich, P. ; Pelz, P. F. (2018):
Integrated Fluid Dynamic Vibration Absorber for Mobile Applications.
In: 11th International Fluid Power Conference, pp. 14-24,
[Conference or Workshop Item]

Friesen, John ; Taubenböck, H. ; Wurm, Michael ; Pelz, P. F. (2018):
The similar size of slums.
In: Habitat International, 73, pp. 79-88. DOI: 10.1016/j.habitatint.2018.02.002,
[Article]

Rausch, L. ; Friesen, John ; Altherr, Lena ; Meck, Marvin ; Pelz, P. F. (2018):
A Holistic Concept to Design Optimal Water Supply Infrastructures for Informal Settlements Using Remote Sensing Data.
In: Remote Sensing 2018, 10 (2), MDPI, ISSN 2072-4292,
DOI: 10.3390/rs10020216,
[Article]

Groß, T. F. ; Bauer, J. ; Ludwig, G. ; Fernandez Rivas, D. ; Pelz, P. F. (2018):
Bubble nucleation from micro-crevices in a shear flow.
In: Experiments in Fluids, 59 (1), pp. 1-10. Springer, ISSN 0723-4864,
DOI: 10.1007/s00348-017-2459-y,
[Article]

Dietrich, Ingo ; Hedrich, P. ; Bölling, Christian ; Brötz, N. ; Geßner, Felix ; Pelz, P. F. (2018):
Concept of a Resilient Process Chain to Control Uncertainty of a Hydraulic Actuator.
In: Applied Mechanics and Materials, Uncertainty in Mechanical Engineering III, Trans Tech Publications, Switzerland, 885, pp. 156-169. ISSN 1662-7482,
[Article]

Pelz, P. F. ; Taubert, Paul (2018):
Influence of the Tip Clearance on the Auto-Oscillation Frequency of a Cavitating Pump.
In: Proceedings of the 10th International Symposium on Cavitation (CAV2018), p. 5. ASME, DOI: 10.1115/1.861851_ch105,
[Article]

Preuß, N. ; Staudter, G. ; Weber, M. ; Anderl, R. ; Pelz, P. F. (2018):
Methods and Technologies for Research- and Metadata Management in Collaborative Experimental Research.
In: Applied Mechanics and Materials, 885, pp. 170-183. DOI: 10.4028/www.scientific.net/AMM.885.170,
[Article]

Taubert, Paul ; Pelz, P. F. ; Buttenbender, J. (2018):
On the Dynamics of a Torus Cloud Employing the Van Wijngaarden Ansatz and the Gilmore Bubble Dynamics Equation.
In: Proceedings of the 10th International Symposium on Cavitation (CAV2018), ASME, DOI: 10.1115/1.861851_ch163,
[Article]

Hedrich, P. ; Brötz, N. ; Pelz, P. F. (2018):
Resilient Product Development – a New Approach for Controlling Uncertainty.
In: Applied Mechanics and Materials, 885, pp. 88-101. DOI: 10.4028/www.scientific.net/AMM.885.88,
[Article]

Groß, T. F. ; Terwort, A. ; Ludwig, G. ; Pelz, P. F. (2018):
The Role of Diffusion-Driven Nucleation in Hydrodynamic Cavitation.
In: Proceedings of the 10th International Symposium on Cavitation (CAV2018), ASME, DOI: 10.1115/1.861851_ch197,
[Article]

Pelz, P. F. ; Taubert, Paul ; Cloos, F.-J. (2018):
Vortex Structure and Kinematics of Encased Axial Turbomachines.
In: International Journal of Turbomachinery, Propulsion and Power, 3 (2), ISSN 2504-186X,
DOI: 10.3390/ijtpp3020011,
[Article]

Cloos, F.-J. ; Pelz, P. F. (2017):
Swirl Boundary Layer at the Inlet of a Rotating Circular Cone.
In: Proceedings of 17th ISROMAC,
[Conference or Workshop Item]

Pelz, P. F. ; Taubert, Paul ; Cloos, F.-J. (2017):
Vortex structure and kinematics of encased axial turbomachines.
In: Proceedings of 17th ISROMAC, 2017,
[Conference or Workshop Item]

Leise, Philipp ; Altherr, Lena C. ; Pelz, P. F. (2017):
Energy-Efficient Design of a Water Supply System for Skyscrapers by Mixed-Integer Nonlinear Programming.
In: Operations Research Proceedings 2017 : Selected Papers of the Annual International Conference of the German Operations Research Society (GOR), Freie Universiät Berlin, Germany, September 6-8, 2017, pp. 475-481,
Springer, ISBN 978-3-319-89920-6,
[Conference or Workshop Item]

Hedrich, P. ; Pelz, P. F. ; Lenz, Eric (2017):
Modellbildung, Regelung und experimentelle Untersuchung einer aktiven Luftfederung in einer Hardware-in-the-Loop-Simulationsumgebung.
In: VDI-Berichte, 2295, pp. 447-460. [Article]

Friesen, John ; Pelz, P. F. (2017):
Die Größenunabhängigkeit von Slums von Land, Kontinent und Kultur.
Tübingen, [Conference or Workshop Item]

Holl, M. ; Rausch, L. ; Pelz, P. F. (2017):
New methods for new systems – How to find the techno-economically optimal hydrogen conversion system.
In: International Journal of Hydrogen Energy, 42 (36), pp. 22641-22654. Elsevier, ISSN 0360-3199,
DOI: 10.1016/j.ijhydene.2017.07.061,
[Article]

Rausch, L. ; Friesen, John ; Altherr, Lena C. ; Pelz, P. F. (2017):
Using Mixed-Integer Programming for the Optimal Design of Water Supply Networks for Slums.
In: Operations Research Proceedings 2017: Selected Papers of the Annual International Conference of the German Operations Research Society (GOR),
[Conference or Workshop Item]

Friesen, John ; Rausch, L. ; Pelz, P. F. (2017):
Providing water for the poor - towards optimal water supply infrastructures for informal settlements by using remote sensing data.
In: 2017 Joint Urban Remote Sensing Event (JURSE),
[Conference or Workshop Item]

Schänzle, C. ; Dietrich, Ingo ; Corneli, T. ; Pelz, P. F. (2017):
Controlling Uncertainty in Hydraulic Drive Systems by means of a Soft Sensor Network.
In: Sensors and Instrumentation, Proceedings of the 35th IMAC, 5, pp. 1-6. [Article]

Pelz, P. F. ; Keil, T. ; Groß, T. F. (2017):
The transition from sheet to cloud cavitation.
In: Journal of Fluid Mechanics, 817, pp. 439-454. Cambridge University Press, ISSN 0022-1120,
[Article]

Altherr, Lena C. ; Pelz, P. F. ; Ederer, T. ; Pfetsch, Marc E.
Jacobs, G. (ed.) (2017):
Optimale Getriebe auf Knopfdruck: Gemischt-ganzzahlige nichtlineare Optimierung zur Entscheidungsunterstützung bei der Auslegung von Getrieben für Kraftfahrzeuge.
In: Tagungsband Antriebstechnisches Kolloquium ATK 2017,
Antriebstechnisches Kolloquium ATK 2017, Aachen, 07.03. - 08.03.2017, [Conference or Workshop Item]

Pelz, P. F. ; Groß, T. F. ; Schänzle, C. (2017):
Hydrospeicher mit Sorbentien - Verhalten, Modellierung und Diskussion.
In: O+P – Ölhydraulik und Pneumatik 1-2, 61 (1-2), pp. 42-49. [Article]

Holl, M. ; Pelz, P. F. (2017):
Towards robust sustainable system design – An engineering inspired approach.
In: International Modal Analysis Conference, IMAC XXXV, 3, pp. 85-101. [Article]

Groß, T. F. ; Pöttgen, P. F. ; Pelz, P. F. (2017):
Analytical Approach for the Optimal Operation of Pumps in Booster Systems.
In: Journal of Water Resources Planning and Management, 143 (8), pp. 04017029. ISSN 0733-9496,
DOI: 10.1061/(asce)wr.1943-5452.0000776,
[Article]

Groß, T. F. ; Pelz, P. F. (2017):
Diffusion-driven nucleation from surface nuclei in hydrodynamic cavitation.
In: Journal of Fluid Mechanics, 830, pp. 138-164. ISSN 0022-1120,
DOI: 10.1017/jfm.2017.587,
[Article]

Altherr, Lena C. ; Dörig, B. ; Ederer, T. ; Pelz, P. F. ; Pfetsch, Marc E. ; Wolf, J. (2017):
A Mixed-Integer Nonlinear Program for the Design of Gearboxes.
In: Operations Research Proceedings 2016, pp. 227-233,
Springer, [Conference or Workshop Item]

Freudigmann, H.-A. ; Dörr, Aaron ; Iben, Uwe ; Pelz, P. F. (2017):
Modeling of Cavitation-Induced Air Release Phenomena in Micro-Orifice Flows.
In: Journal of Fluids Engineering, 139 (11), p. 111301. ISSN 0098-2202,
DOI: 10.1115/1.4037048,
[Article]

Cloos, F.-J. ; Stapp, D. ; Pelz, P. F. (2017):
Swirl boundary layer and flow separation at the inlet of a rotating pipe.
In: Journal of Fluid Mechanics, 811, pp. 350-371. ISSN 0022-1120,
[Article]

Cloos, F.-J. ; Zimmermann, Anna- L. ; Pelz, P. F. (2017):
Two turbulent flow regimes at the inlet of a rotating pipe.
In: European Journal of Mechanics B-Fluids, 61,2 (1/2), pp. 330-335. Elsevier, ISSN 0997-7546,
[Article]

Schmitz, Christian ; Pelz, P. F. (2016):
Optimal Operation of a Tidal Turbine.
In: 19th International Seminar on Hydropower Plants,
[Conference or Workshop Item]

Holl, M. ; Platzer, M. F. ; Pelz, P. F. (2016):
Techno-economic comparison of renewable energy systems using Multi-pole system analysis (MPSA).
In: International Journal of Energy Production and Management, Vol. 1 (4), pp. 371-381, 1 (4), pp. 371-381. [Article]

Budde, Ibrahim ; Vnucec, Domagoj ; Kiesbauer, J. ; Ludwig, G. ; Pelz, P. F. (2016):
Strömungsinduzierte Schwingungen in Regelarmaturen.
In: Industriearmaturen, Ausgabe 3|2016, 24, [Article]

Schänzle, C. ; Ludwig, G. ; Pelz, P. F. (2016):
ERP Positive Displacement Pumps – Physically Based Approach Towards an Application-Related Efficiency Guideline.
In: 3rd International Rotating Equipment Conference (IREC) Pumps, Compressors and Vacuum Technology 2016, Duesseldorf, Germany,
ISBN 978-3-8163-0697-9,
[Conference or Workshop Item]

Saul, Sebastian ; Pelz, P. F. (2016):
Influence of Compressibility on Fan Efficiency and Fan Efficiency Scaling.
In: 3rd International Rotating Equipment Conference (IREC) Pumps, Compressors and Vacuum Technology 2016, Duesseldorf, Germany,
ISBN 978-3-8163-0697-9,
[Conference or Workshop Item]

Corneli, T. ; Pelz, P. F. ; Ludwig, G. (2016):
Influence of Temperature and Shear Rate on the Slip Length in the Hydrodynamic Lubrication for a Polyalphaolefin.
In: In: 19th International Sealing Conference, 12.10. - 13.10. 2016, Stuttgart, [Article]

Saul, Benjamin ; Pöttgen, Philipp ; Zimmermann, Wolf ; Pelz, P. F. (2016):
SHEP: An Innovative Language to create and evaluate Optimization Programs for Pump Systems.
In: 3rd International Rotating Equipment Conference (IREC) Pumps, Compressors and Vacuum Technology 2016, Duesseldorf, Germany,,
[Conference or Workshop Item]

Pöttgen, Philipp ; Pelz, P. F. (2016):
The best attainable EEI for Booster Stations derived by Glob-al Optimization.
In: 3rd International Rotating Equipment Conference (IREC) Pumps, Compressors and Vacuum Technology 2016, Duesseldorf, Germany,
ISBN 978-3-8163-0697-9,
[Conference or Workshop Item]

Taubert, Paul ; Stoffel, B. ; Ludwig, G. ; Pelz, P. F. (2016):
Development of a Standardized Approach to Assess the Energy Efficiency of Booster Pump Units in the Sense of an Extended Product.
In: 3rd International Rotating Equipment Conference (IREC) Pumps, Compressors and Vacuum Technology 2016, Duesseldorf, Germany,
ISBN 978-3-8163-0697-9,
[Conference or Workshop Item]

Groß, T. F. ; Ludwig, G. ; Pelz, P. F. (2016):
Influence of Surface Roughness on Cavitation in a Centrifugal Pump.
In: 3rd International Rotating Equipment Conference (IREC) Pumps, Compressors and Vacuum Technology 2016, Duesseldorf, Germany,
ISBN 978-3-8163-0697-9,
[Conference or Workshop Item]

Budde, Ibrahim ; Ludwig, G. ; Pelz, P. F. (2016):
Numerical Prediction and Validation of Suspension Flows and its Erosive Effect.
In: 3rd International Rotating Equipment Conference (IREC) Pumps, Compressors and Vacuum Technology 2016, Duesseldorf, Germany,
ISBN 978-3-8163-0697-9,
[Conference or Workshop Item]

Lang, S. ; Pelz, P. F. (2016):
Unified Prediction of Hydrodynamic Forces in Plain Annular Seals and Journal Bearings by means of an Analytically Derived Design Tool.
In: 3rd International Rotating Equipment Conference (IREC) Pumps, Compressors and Vacuum Technology 2016, Duesseldorf, Germany,
ISBN 978-3-8163-0697-9,
[Conference or Workshop Item]

Holl, M. ; Janke, T. ; Pelz, P. F. ; Platzer, M. (2016):
Sensitivity analysis of a techno-economic optimal wind-energy converter.
In: 2nd International Conference On Next Generation Wind Energy, [Article]

Altherr, Lena C. ; Ederer, T. ; Lorenz, U. ; Pelz, P. F. ; Pöttgen, Philipp
Lübbecke, Marco E. ; Koster, Arie ; Letmathe, Peter ; Madlener, Reinhard ; Peis, Britta ; Walther, Grit (eds.) (2016):
Designing a Feedback Control System via Mixed-Integer Programming.
In: Operations Research Proceedings 2014: Selected Papers of the Annual International Conference of the German Operations Research, pp. 121-127, Cham, Springer, ISBN 978-3-319-28695-2,
[Book Section]

Pelz, P. F. ; Cloos, F.-J. ; Sieber, J. (2016):
Analytic Accessment of an Embedded Aircraft Propulsion.
In: ASME Turbo Expo 2016 - Turbomachinery Technical Conference & Exposition, 1, [Article]

Dörig, B. ; Ederer, T. ; Pelz, P. F. ; Pfetsch, M. E. ; Wolf, J. (2016):
Gearbox Design via Mixed-Integer Programming.
In: ECCOMAS Congress 2016 - VII European Congress on Computational Methods in Applied Sciences a nd Engineering,
[Conference or Workshop Item]

Cloos, F.-J. ; Zimmermann, A.-L. ; Pelz, P. F. (2016):
A Second Turbulent Regime when a Fully Developed Axial Turbulent Flow Enters a Rotating Pipe.
In: ASME Turbo Expo 2016 - Turbomachinery Technical Conference & Exposition, 2 B, [Article]

Rausch, L. ; Leise, Philipp ; Ederer, T. ; Altherr, Lena C. ; Pelz, P. F. (2016):
A Comparison of MILP and MINLP Solver Performance on the Example of a Drinking Water Supply System Design Problem.
In: ECCOMAS Congress 2016 - VII European Congress on Computational Methods in Applied Sciences a nd Engineering,
[Conference or Workshop Item]

Utz, M. ; Hedrich, P. ; Pelz, P. F. (2016):
Computing an Operating Strategy for an Active Body Control with Dynamic Programming in the Automotive Area.
In: ECCOMAS Congress 2016 - VII European Congress on Computational Methods in Applied Sciences and Engineering,
[Conference or Workshop Item]

Pöttgen, Philipp ; Pelz, P. F. (2016):
Evaluation of Different Approaches for the Optimization of Layout and Control of Booster Stations.
In: ECCOMAS Congress 2016 - VII European Congress on Computational Methods in Applied Sciences and Engineering,
[Conference or Workshop Item]

Mousavi, Roozbeh ; Kummer, Florian ; Oberlack, Martin ; Pelz, P. F. (2016):
Level Set Method for Simulating the Interface Kinematics: Application of a Discontinuous Galerkin Method.
In: ECCOMAS Congress 2016 - VII European Congress on Computational Methods in Applied Sciences and Engineering,
[Conference or Workshop Item]

Khamassi, Jamel ; Bierwisch, Claas ; Pelz, P. F. (2016):
Geometry optimization of branchings in vascular networks.
In: Physical Review E, 93 (6), American Physical Society, [Article]

Holl, M. ; Pelz, P. F. (2016):
Multi-pole system analysis (MPSA) - A systematic method towards techno-economic optimal system design.
In: Applied Energy, 169, pp. 937-949. Elsevier, ISSN 0306-2619,
DOI: 10.1016/j.apenergy.2016.02.076,
[Article]

Groß, T. F. ; Ludwig, G. ; Pelz, P. F. (2016):
Experimental and theoretical investigation of nucleation from wall-bounded nuclei in a laminar flow.
In: 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, [Article]

Cloos, F.-J. ; Zimmermann, A.-L. ; Pelz, P. F. (2016):
Two Turbulent Flow Regimes at the Inlet of a Rotating Pipe.
16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC), Honolulu, 10.4. - 15.4.2016, [Conference or Workshop Item]

Vergé, Angela ; Pöttgen, Philipp ; Altherr, Lena C. ; Ederer, T. ; Pelz, P. F. (2016):
Lebensdauer als Optimierungsziel - Algorithmische Struktursynthese am Beispiel eines hydrostatischen Getriebes.
In: O+P – Ölhydraulik und Pneumatik, 60 (1-2), pp. 114-121. [Article]

Pelz, P. F. ; Schänzle, C. ; Corneli, T. (2016):
Ähnlichkeitsbeziehungen bei Verdrängermaschinen- eine einheitliche Wirkungsgradmodellierung.
In: O+P – Ölhydraulik und Pneumatik, 60 (1-2), pp. 104-113. [Article]

Hedrich, P. ; Johe, M. ; Pelz, P. F. (2016):
Design and realization of an adjustable fluid powered piston for an active air spring.
In: 10th International Fluid Power Conference, Dresden, Germany, pp. 571-582. [Article]

Corneli, T. ; Ludwig, G. ; Pelz, P. F. (2016):
Slip length of the tribo system steel-polyalphaolefin-steel determined by a novel tribometer.
In: 10th International Fluid Power Conference, Dresden, Germany, pp. 479-491. [Article]

Groß, T. F. ; Ludwig, G. ; Pelz, P. F. (2016):
Experimental evidence of nucleation from wall-bounded nuclei in a laminar flow.
p. 5, IOP Publishing Ltd, 9th International Symposium on Cavitation (CAV2015), Lausanne, Switzerland, 06.-10.12., DOI: 10.1088/1742-6596/656/1/012034,
[Conference or Workshop Item]

Groß, T. F. ; Pelz, P. F. (2016):
High-Speed Visualisierung von Keimbildungsvorgängen an wandgebundenen Porenkeimen.
p. 8, 23. Fachtagung der Deutschen Gesellschaft für Laser-Anemometrie GALA e.V., Dresden, Germany, 08.-10.09.2015, [Conference or Workshop Item]

Pelz, P. F. ; Holl, M. ; Platzer, M. (2016):
Analytical method towards an optimal energetic and economical wind-energy converter.
In: Energy, 94, pp. 344-351. ISSN 0360-5442,
[Article]

Altherr, Lena C. ; Ederer, T. ; Lorenz, U. ; Pelz, P. F. ; Pöttgen, Philipp (2016):
Experimental Validation of an Enhanced System Synthesis Approach.
pp. 1-7, Springer, International Conference of the German Operations Research Society 2014, Aachen, Germany, 02.-05.09., ISSN 0721-5924, ISBN 978-3-319-28695-2,
DOI: 10.1007/978-3-319-28697-6,
[Conference or Workshop Item]

Pöttgen, Philipp ; Ederer, T. ; Altherr, Lena C. ; Lorenz, U. ; Pelz, P. F. (2015):
Examination and Optimization of a Heating Circuit for Energy-Efficient Buildings.
In: Energy Technology, 4 (1), pp. 136-144. WILEY-VCH Verlag, ISSN 2194-4296,
[Article]

Holl, M. ; Pelz, P. F. (2015):
Lohnende Ideen erkennen – Neue Methode identifiziert ökonomisches Optimum.
In: Ke-Next, 2015 (11-12), [Article]

Hedrich, P. ; Cloos, F.-J. ; Würtenberger, Jan ; Pelz, P. F. (2015):
Comparison of a New Passive and Active Technology for Vibration Reduction of a Vehicle Under Uncertain Load.
In: Applied Mechanics and Materials, 807, pp. 57-66. Trans Tech Publications, Switzerland, ISSN 1660-9336,
[Article]

Pöttgen, Philipp ; Ederer, T. ; Altherr, Lena C. ; Pelz, P. F. (2015):
Developing a Control Strategy for Booster Stations under Uncertain Load.
In: Applied Mechanics and Materials, 807, pp. 241-246. Trans Tech Publications, Switzerland, ISSN 1660-9336,
[Article]

Vergé, Angela ; Lotz, Julian ; Kloberdanz, Hermann ; Pelz, P. F. (2015):
Uncertainty Scaling – Motivation, Method and Example Application to a Load Carrying Structure.
In: Applied Mechanics and Materials, 807, pp. 99-108. ISSN 1660-9336,
[Article]

Altherr, Lena C. ; Ederer, T. ; Schänzle, C. ; Lorenz, U. ; Pelz, P. F. (2015):
Algorithmic System Design Using Scaling and Affinity Laws.
In: Operations Research Proceedings 2015, pp. 605-611, Springer, ISBN 978-3-319-42901-4,
DOI: 10.1007/978-3-319-42902-1_82,
[Book Section]

Altherr, Lena C. ; Ederer, T. ; Vergé, Angela ; Pelz, P. F. (2015):
Algorithmische Struktursynthese eines hydrostatischen Getriebes.
In: VDI-Berichte, In: Elektrik, Mechanik, Fluidtechnik in der Anwendung, pp. 145-155, Düsseldorf, VDI-Verlag, [Book Section]

Altherr, Lena C. ; Ederer, T. ; Farnetane, Lucas S. ; Vergé, Angela ; Pöttgen, Philipp ; Pelz, P. F. (2015):
Multi-criterial Design of a Hydrostatic Transmission System by Mixed-Integer Programming.
In: Operations Research Proceedings 2015: Selected Papers of the International Conference on Operations Research,
OR 2015, Wien, September 1-4, 2015, [Conference or Workshop Item]

Altherr, Lena C. ; Ederer, T. ; Pöttgen, Philipp ; Lorenz, U. ; Pelz, P. F.
Pelz, P. F. ; Groche, Peter (eds.) (2015):
Multicriterial Optimization of Technical Systems Considering Multiple Load and Availability Scenarios.
In: Applied mechanics and materials, 2, In: Uncertainty in mechanical engineering, pp. 247-256, Uetikon-Zürich, Trans Tech Publications, ISBN 978-3-03835-652-3,
[Book Section]

Pelz, P. F. ; Cloos, F.-J. ; Corneli, T. ; Hedrich, P. ; Nakhjiri, M. (2015):
Leichtbautilger für Fahrwerke.
In: VDI-Berichte, (2261), pp. 121-129. VDI Verlag GmbH, ISSN 0083-5560,
[Article]

Hedrich, P. ; Pelz, P. F. ; Nakhjiri, M. ; Fäth, S. ; Dehlwes, S. (2015):
Luftdämpfung als zukunftsweisende Technologie im Nutzfahrzeugbereich – Optimale Auslegung eines Luftfederdämpfers.
In: VDI-Berichte, (2261), pp. 145-153. VDI Verlag GmbH, ISSN 0083-5560,
[Article]

Kruse, A. ; Groß, A. ; Brooks, W. ; Pelz, P. F. (2015):
Messung und Bewertung dynamischer Kennlinien von Stoßdämpferventilen – Dämpfungsmodule in der PKW-Fahrwerktechnik.
In: VDI-Berichte, (2261), pp. 185-194. VDI Verlag GmbH, ISSN 0083-5560,
[Article]

Pelz, P. F. ; Pfetsch, Marc E. (2015):
Der Unsicherheit von Anfang an auf der Spur.
In: PT-Magazin für Wirtschaft und Gesellschaft,
[Conference or Workshop Item]

Pöttgen, Philipp ; Ederer, T. ; Pelz, P. F. (2015):
Examination and Optimisation of a heating circuit using TOR.
EST 2015, Karlsruhe, 19-21 Mai 2015, [Conference or Workshop Item]

Volk, David ; Pelz, P. F. (2015):
Hollow-Hub Turbine for Run-of-the-river Small Hydropower.
EST 2015, Karlsruhe, 19-21 Mai 2015, [Conference or Workshop Item]

Schänzle, C. ; Altherr, Lena C. ; Ederer, T. ; Pelz, P. F. (2015):
TOR – Towards the Energetically Optimal Ventilation System.
EST 2015, Karlsruhe, 19-21 Mai 2015, [Conference or Workshop Item]

Holl, M. ; Platzer, M. F. ; Pelz, P. F. (2015):
Optimal energy systems design applied to an innovative ocean-wind energy converter.
7th International Conference on Sustainable Development and Planning, Istanbul, 19-21 Mai 2015, [Conference or Workshop Item]

Holl, M. ; Platzer, M. F. ; Pelz, P. F. (2015):
Techno-economical System Optimisation and Its Application to an Energy System.
EST 2015, Karlsruhe, 20-22 Mai 2015, [Conference or Workshop Item]

Metzler, M. ; Pelz, P. F. (2015):
Draft Tube Design Method for Operation at optimal Coefficient of Performance in Low Head Hydropower.
In: WasserWirtschaftExtra, 105 (13), pp. 13-17. Springer, ISSN 0043-0978,
[Article]

Schänzle, C. ; Altherr, Lena C. ; Ederer, T. ; Lorenz, U. ; Pelz, P. F. (2015):
As Good As It Can Be - Ventilation System Design By A Combined Scaling And Discrete Optimization Method.
International Conference on Fan Noise, Fan Technology and Numerical Methods (Fan 2015), Lyon, France, 15.-17.04., [Conference or Workshop Item]

Saul, Sebastian ; Stonjek, S. ; Pelz, P. F. (2015):
Influence of Compressibility on Incidence Losses of Turbomachinery at Subsonic Operation.
In: FAN2015 - Proceedings of the International Conference on Fan Noise, Fan Technology and Numerical Methods - Lyon 2015, [Article]

Freudigmann, H.-A. ; Iben, U. ; Pelz, P. F. (2015):
Air release measurements of V-oil 1404 downstream of a micro orifice at choked flow conditions.
In: Proceedings of 9th International Symposium on Cavitation (CAV2015)), Journal of Physics: Conference Series,, 656 (1), [Article]

Metzler, M. ; Pelz, P. F. (2014):
An Analytic Approach to Optimization of Tidal Turbine Arrays.
Grand Renewable Energy 2014 Tokyo, Tokyo, 27. Juli 2014 – 1. August 2014, [Conference or Workshop Item]

Metzler, M. ; Pelz, P. F. (2014):
Two Common Fallacies in Low Head Hydropower - A Critical Discussion.
Grand Renewable Energy 2014 Tokyo, Tokyo, 27. Juli 2014 – 1. August 2014, [Conference or Workshop Item]

Vergé, Angela ; Pöttgen, Philipp ; Pelz, P. F. (2014):
Hilfe von TOR - Lebensdauer als Optimierungsziel im automatisierten Systementwurf.
In: Fluid-Markt : Jahreseingangsführer, 2015, pp. 47-49. Verlag Moderne Industrie, ISSN 1614-1806,
[Article]

Metzler, M. ; Pelz, P. F. (2014):
Conditioning of Tail Water Flow by Draft Tube Design - A New Approach for Low Head Hydropower.
Viennahydro, Wien, 26 - 28 November 2014, [Conference or Workshop Item]

Pelz, P. F. ; Rösner, J. (2014):
Aktive Luftfeder mit dynamisch veränderlicher wirksamer Fläche.
[Standards, patents]

Dimitrov, M. ; Groß, T. F. ; Pelz, P. F. (2014):
Zeitlich und örtlich hochaufgelöste Messung von Oberflächenbelastungen infolge Kavitation.
11. Tagung "Technische Diagnostik", Merseburg, 23.-24.10.2014, [Conference or Workshop Item]

Corneli, T. ; Pelz, P. F. ; Ludwig, G. (2014):
Slip length in narrow sealing gaps – an experimental approach.
18th International Sealing Conference, Stuttgart, 08.10. - 09.10. 2014, [Conference or Workshop Item]

Corneli, T. ; Preuß, N. ; Troßmann, O. ; Pelz, P. F. (2014):
Experimental studies on the volumetric efficiency of triple screw pumps.
International VDI Conference "Screw Machines 2014", Dortmund, September 23-24, 2014, [Conference or Workshop Item]

Cloos, F.-J. ; Pelz, P. F. (2014):
Swirl Boundary Layer at the Inlet of a Rotating Pipe.
The First Madingely Workshop. Fluid Mechanics: an interdisciplinary approach, Cambridge, 23-25 Juli 2014, [Conference or Workshop Item]

Pöttgen, Philipp ; Altherr, Lena C. ; Ederer, T. ; Lorenz, U. ; Pelz, P. F. (2014):
Control Loop Elements in Fluid Systems via Mixed-Integer Linear Programming.
IFORS 2014, The Art of Modeling, Barcelona, 13th - 18th July, [Conference or Workshop Item]

Altherr, Lena C. ; Ederer, T. ; Pöttgen, Philipp ; Lorenz, U. ; Pelz, P. F. (2014):
Efficient Dynamic Flow Models with Technical Restrictions.
IFORS 2014, The Art of Modeling, Barcelona, 13th - 18th July, [Conference or Workshop Item]

Lorenz, U. ; Altherr, Lena C. ; Ederer, T. ; Pelz, P. F. ; Pöttgen, Philipp ; Saul, Benjamin ; Zimmermann, Wolf (2014):
MIP Generation for System Synthesis Tasks.
IFORS 2014, The Art of Modeling, Barcelona, 13th - 18th July, [Conference or Workshop Item]

Pelz, P. F. ; Vergé, Angela (2014):
Validated Biomechanical Model for Efficiency and Speed of Rowing.
In: Journal of Biomechanics, 47 (13), pp. 3415-3422. Elsevier, [Article]

Stapp, D. ; Pelz, P. F. (2014):
Evolution Of Swirl Boundary Layer And Wall Stall At Part Load - A Generic Experiment.
ASME Turbo Expo 2014 - Turbine Technical Conference and Exhibition, Düsseldorf, 16-20 Juni 2014, [Conference or Workshop Item]

Stonjek, S. ; Pelz, P. F. (2014):
Introduction of an Universal Scale-Up Method for the Efficiency of Axial and Centrifugal Fans.
ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (GT2014), Düsseldorf, Germany, 16.-20.06. 2014, [Conference or Workshop Item]

Njoya, T. ; Nakhjiri, M. ; Pelz, P. F. ; Frase, R. (2014):
Scaling Methods for Matching Tasks in Turbocharged Engines.
ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (GT2014), Düsseldorf, Germany, 16.-20.06. 2014, [Conference or Workshop Item]

Dimitrov, M. ; Pelz, P. F. ; Werthschützky, Roland (2014):
Messsystem für zeitlich und örtlich hochaufgelöste Druckmessung.
17. ITG/GMA-Fachtagung Sensoren und Messsysteme 2014, Nürnberg, 3.-4. Juni 2014, [Conference or Workshop Item]

Pelz, P. F. ; Keil, T. ; Ludwig, G. (2014):
On the Kinematics of Sheet and Cloud Cavitation and Related Erosion.
In: Fluid Mechanics and Its Applications, 106, In: Advanced Experimental and Numerical Techniques for Cavitation Erosion Prediction, Springer, [Book Section]

Dimitrov, M. ; Pelz, P. F. ; Lyashenko, Alexandra ; Hakimi Tehrani, Ardeshir ; Dörsam, Edgar
Murrenhoff, Hubertus (ed.) (2014):
Measurement System by Printed Thin Pressure Sensor Array.
In: The 9th International Fluid Power Conference, 9. IFK : Volume 3, pp. 272-283,
Aachen, HP - Fördervereinigung Fluidtechnik, The 9th International Fluid Power Conference, 9. IFK, Aachen, Germany, March 24-26, 2014, ISBN 978-3-98164-802-7,
[Conference or Workshop Item]

Bedarff, T. ; Hedrich, P. ; Pelz, P. F. (2014):
Design of an Active Air Spring Damper.
9. Internationale Fluidtechnische Kolloquium (ifK), Aachen, Germany, 24. - 26.03.2014, [Conference or Workshop Item]

Thurner, J. ; Corneli, T. ; Pelz, P. F. (2014):
Development of a Hydrostatic Load Balancing System for 3-Spindle Screw Pumps.
pp. 14-25, 9. Internationale Fluidtechnische Kolloquium (ifK), Aachen, Germany, 24. - 26.03.2014, ISBN 978-3-9816480-0-3,
[Conference or Workshop Item]

Corneli, T. ; Pelz, P. F. (2014):
Employing Hydraulic Transmission for Light Weight Dynamic Absorber.
9. Internationale Fluidtechnische Kolloquium (ifK), Aachen, Germany, 24. - 26.03.2014, ISBN 9783981648027,
[Conference or Workshop Item]

Dörig, B. ; Ederer, T. ; Hedrich, P. ; Lorenz, U. ; Pelz, P. F. ; Pöttgen, Philipp (2014):
Technical Operations Research (TOR) Exemplified by a Hydrostatic Power Transmission System.
pp. 152-161, 9. Internationale Fluidtechnische Kolloquium (ifK), Aachen, Germany, 24. - 26.03.2014, [Conference or Workshop Item]

Pelz, P. F. (2014):
250 Jahre Energienutzung: Algorithmen übernehmen Synthese, Planung und Betrieb von Energiesystemen.
Fachvortrag anlässlich der Ehrenpromotion von Hans-Ulrich Banzhaf, Universität Siegen, 23.01.2014, [Conference or Workshop Item]

Pelz, P. F. ; Lorenz, U. ; Ederer, T. ; Metzler, M. ; Pöttgen, Philipp (2014):
Global System Optimization and Scaling for Turbo Systems and Machines.
15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, ISROMAC-15, Honolulu, USA, 24.-28.02.2014, [Conference or Workshop Item]

Lorenz, U. ; Ludwig, G. ; Pelz, P. F. (2014):
Besser geht's nicht : TOR plant das energetisch optimale Fluidsystem.
In: chemie & more, 5 (1), pp. 10-14. Succidia AG, ISSN 2191-3803,
[Article]

Pelz, P. F. ; Thurner, J. (2014):
Messung und Berechnung der Druckeinsatzgrenzen dreispindeliger Schraubenpumpen.
In: O+P Journal, 2014 (01), ISSN 0341-2660,
[Article]

Dimitrov, M. ; Pelz, P. F. ; Werthschützky, R. (2014):
Measuring system for temporary and locally high-resolution pressure measurement.
pp. 6 pp.-6 pp., [Conference or Workshop Item]

Lang, S. ; Ludwig, G. ; Pelz, P. F. ; Stoffel, B. (2013):
General Methodologies of Determining the Energy-Efficiency-Index of Pump Units in the Frame of the Extended Product Approach.
pp. 385-397, 8th International Conference on Energy Efficiency in Motor Driven Systems, Rio de Janeiro, Brazil, 28.-30.10.2013, ISBN 9789279391378,
[Conference or Workshop Item]

Pelz, P. F. ; Stonjek, S. (2013):
A Second Order Exact Scaling Method for Turbomachinery Performance Prediction.
In: International Journal of Fluid Machinery and Systems, 6 (4), [Article]

Stapp, D. ; Pelz, P. F. ; Loens, J. M. (2013):
On Part Load Recirculation of Pumps and Fans - A Generic Study.
6th International Conference on Pumps and Fans with Compressors and Wind Turbines (ICPF2013), Beijing, China, 19.-22.09., [Conference or Workshop Item]

Pelz, P. F. ; Metzler, M. (2013):
Optimization of tidal turbine fields and runoff powerstations.
In: Transition to renewable energy systems : Programme & abstracts, p. 128,
Frankfurt a. M., 3rd International Conference on Energy Process Engineering, Frankfurt a. M., 04.-06.06.2013, [Conference or Workshop Item]

Pelz, P. F. ; Stonjek, S. (2013):
The Influcence of Reynolds Number and Roughness on the Efficiency of Axial and Centrifugal Fans: A Physically based Scaling Method.
In: Journal of Engineering for Gas Turbines and Power, 135 (5), pp. 052601-1-052601-8. ASME, [Article]

Pelz, P. F. ; Metzler, M. (2013):
Maximum Yield at Minimal Cost - New Thinking in Small-Scale Hydropower Generation.
In: zek Hydro, 2013 (4), Offene Gesellschaft Verlag, [Article]

Pelz, P. F. ; Metzler, M. (2013):
An Analytic Approach to Optimize Tidal Turbine Fields.
In: IOP Conference Series: Materials Science and Engineering - Turbines, 52, pp. 1-7, Bristol, IOP Publishing, 6th International Conference on Pumps and Fans with Compressors and Wind Turbines, Beijing, 19 - 22 September 2013, ISSN 1757-899X,
DOI: 10.1088/1757-899X/52/5/052019,
[Conference or Workshop Item]

Pelz, P. F. ; Metzler, M. (2013):
Maximaler Ertrag bei minimalen Kosten : neues Denken bei Kleinwasserkraftanlagen.
In: ZeK Hydro: Fachmagazin für Wasserkraft, 2013 (03), Gruber-Seefried-zek Verlags, [Article]

Müller, L. ; Helduser, S. ; Weber, J. ; Schümichen, M. ; Rüdiger, F. ; Fröhlich, J. ; Groß, T. F. ; Ludwig, G. ; Pelz, P. F. (2013):
Messverfahren und numerische Modellierung von Kavitation in einem ölhydraulischen Ventil.
In: O+P Journal, 2013 (2), pp. 20-26. ISSN 0341-2660,
[Article]

Pelz, P. F. ; Lorenz, U. (2013):
Besser geht‘s nicht! TOR plant das energetisch optimale Fluidsystem.
In: Delta-p, 19 (3), Nagel Ingenieur-Verlag, [Article]

Pelz, P. F. ; Ludwig, G. (2013):
Der Wirkungsgrad von Verdrängermaschinen.
In: Delta p, [Article]

Metzler, M. ; Pelz, P. F. (2012):
Design and optimization of small hydropower type series for surface watercourse.
17th international Seminar on Hydropower Plants, Vienna, Austria, 21.-23.11.2012, [Conference or Workshop Item]

Pelz, P. F. ; Metzler, M. (2012):
Optimization of power-specific investment costs for small hydropower.
17th international Seminar on Hydropower Plants, Vienna, Austria, 21.-23.11.2012, [Conference or Workshop Item]

Keil, T. ; Pelz, P. F. ; Buttenbender, J. (2012):
On the Transition from Sheet to Cloud Cavitation.
8th International Symposium on Cavitation (CAV2012), Singapore, 13.-16.08.2012, [Conference or Workshop Item]

Nakhjiri, M. ; Pelz, P. F. ; Matyschok, B. ; Horn, A. (2012):
vATL – A Virtual Turbocharger on the Basis of Physical Models: Faster Calibration Processes with Deeper System Understanding.
9. Symposium Steuerungssysteme für automobile Antriebe, Berlin, Germany, September 2012, [Conference or Workshop Item]

Buttenbender, J. ; Pelz, P. F. (2012):
The influence of imposed strain rate and circulation on bubble and cloud dynamics.
8th International Symposium on Cavitation (CAV2012), Singapore, 13.-16.08.2012, [Conference or Workshop Item]

Lang, S. ; Dimitrov, M. ; Pelz, P. F. (2012):
Spatial and temporal high resolution measurement of bubble impacts.
8th International Symposium on Cavitation (CAV2012), Singapore, 13.-16.08.2012, ISBN 978-981-07-2826-7,
[Conference or Workshop Item]

Karstadt, S. ; Pelz, P. F. (2012):
A Physical Model for the Tip Vortex Loss – Experimental Validation and Scaling Method.
p. 9, ASME, Turbo Expo 2012, Copenhagen, Denmark, 11.-15.06., [Conference or Workshop Item]

Nakhjiri, M. ; Pelz, P. F. (2012):
Turbomachines under Periodic Admission - Axiomatic Performance Prediction.
ASME, Turbo Expo 2012, Copenhagen, Denmark, 11.-15.06., [Conference or Workshop Item]

Bedarff, T. ; Pelz, P. F. (2012):
Development of an active and integrated suspension system.
p. 7, 8th International Fluid Power Conference, Dresden, Germany, 26.-28.03.2012, [Conference or Workshop Item]

Stein, A. ; Pelz, P. F.
Hanselka, Holger (ed.) (2012):
Möglichkeiten und Grenzen numerischer Strömungsakustik mit OpenFOAM.
In: Fortschritte der Akustik : Tagungsband der 38. Deutschen Jahrestagung für Akustik, DAGA 2012 in Darmstadt : 19.-22. März 2012 in Darmstadt, pp. 295-296, Berlin, Deutsche Gesellschaft für Akustik e.V., ISBN 978-3-939296-04-1,
[Book Section]

Karstadt, S. ; Pelz, P. F. (2012):
Ventilatorlärm.
38. Deutsche Jahrestagung für Akustik (DAGA 2012), Darmstadt, Germany, 19.-22.03., [Conference or Workshop Item]

Nakhjiri, M. ; Pelz, P. F. ; Matyschok, B. ; Horn, A. ; Däubler, L. (2012):
Apparent and Real Efficiency of Turbochargers under Influence of Heat Flow.
14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-14), Honolulu, USA, 27.02.-02.03.2012, [Conference or Workshop Item]

Pelz, P. F. ; Lorenz, U. ; Ederer, T. ; Lang, S. ; Ludwig, G. (2012):
Designing Pump Systems by Discrete Mathematical Topology Optimization: The Artificial Fluid Systems Designer (AFSD).
p. 10, VDMA, 2nd International Rotating Equipment Conference, Düsseldorf, Germany, 27.-28.09.2012, [Conference or Workshop Item]

Thurner, J. ; Pelz, P. F. ; Holz, F. (2012):
Dynamics of a Hydrodynamic Supported Screw Pump Rotor.
14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-14), Honolulu, USA, 27.02.-02.03.2012, [Conference or Workshop Item]

Thurner, J. ; Pelz, P. F. (2012):
Experimental and Theoretical Investigations concerning the Operation Limit of Three-Spindle Screw Pumps.
2nd International Rotating Equipment Conference, Düsseldorf, Germany, 27.-28.09.2012, [Conference or Workshop Item]

Thurner, J. ; Pelz, P. F. ; Holz, F. (2012):
Experimental and Theoretical Studies of the Displacement and Bending of a Hydrodynamic Supported Idle Spindle of a Three-Spindle Screw Pump.
p. 7, Dresdner Verein zur Förderung der Fluidtechnik e.V., 8th International Fluid Power Conference (IFK), Dresden, Germany, 26.-28.03.2012, [Conference or Workshop Item]

Pelz, P. F. ; Stonjek, S. (2012):
The Influcence of Reynolds Number and Roughness on the Efficiency of Axial and Centrifugal Fans: A Physically based Scaling Method.
Fan2012, Senlis, 18.4 - 20.4.2012, [Conference or Workshop Item]

Pelz, P. F. (2011):
Upper Limit for Hydropower in an Open-Channel Flow.
In: Journal of Hydraulic Engineering, 137 (11), American Society of Civil Engineers, ISSN 0733-9429,
DOI: 10.1061/(ASCE)HY.1943-7900.0000393,
[Article]

Pelz, P. F. ; Bedarff, T. ; Mathias, J. (2011):
Uncertainties with respect to active vibration control.
In: Applied Mechanics and Materials, 104, pp. 161-175. Trans Tech Publications, ISSN 1660-9336, e-ISSN 1662-7482,
DOI: 10.4028/www.scientific.net/AMM.104.161,
[Article]

Pelz, P. F. (2011):
Verändert und doch gleich kehre ich wieder – Größe und Skalierung in Natur und Technik.
Rotary Club Darmstadt, [Lecture]

Pelz, P. F. (2011):
Funktion durch Aufwand: Mit Gründlichkeit zur Innovation.
In: Delta p, 17 (4), pp. 1-4. Nagel Ingenieur-Verlag, [Article]

Nakhjiri, M. ; Pelz, P. F. ; Matyschok, B. ; Horn, A. ; Däubler, L. (2011):
Physical Modeling of Automotive Turbocharger Compressor: Analytical Approach and Validation.
ComVec 2011-Commercial Vehicle Engineering Congress, Chicago, USA, 13.-14.09., DOI: 10.4271/2011-01-2214,
[Conference or Workshop Item]

Keil, T. ; Pelz, P. F. ; Cordes, U. ; Ludwig, G. (2011):
Cloud Cavitation and Cavitation Erosion in Convergent Divergent Nozzle.
In: WIMRC 3rd International Cavitation Forum 2011,
Coventry, WIMRC 3rd International Cavitation Forum 2011, Coventry, 4th to 6th July 2011, [Conference or Workshop Item]

Keil, T. ; Necker, J. ; Pelz, P. F. ; Kadavelil, Jean ; Moser, W. ; Christ, D. (2011):
Droplet Impact vs. Cavitation Erosion.
In: WIMRC 3rd International Cavitation Forum 2011,
Coventry, WIMRC 3rd International Cavitation Forum 2011, Coventry, 4th to 6th July 2011, [Conference or Workshop Item]

Karstadt, S. ; Matyschok, B. ; Pelz, P. F. (2011):
Sound deadening on fans.
7 B, In: Proceedings of ASME Turbo Expo 2011, pp. 961-972,
New York, ASME, ASME Turbo Expo 2011, Vancouver, Canada, June 6 - 10, 2011, ISBN 9780791854679,
[Conference or Workshop Item]

Pelz, P. F. ; Keil, T. ; Buttenbender, J. (2011):
On the transient behavoir of cloud cavitation.
Lausanne, SHF Conference on Cavitation and Hydraulic Machines, Lausanne, 26.-27. Mai 2011, [Conference or Workshop Item]

Nakhjiri, M. ; Pelz, P. F. ; Matyschok, B. ; Horn, A. ; Däubler, L.
Sens, Marc ; Wiedemann, Bernd (eds.) (2011):
vATL – ein virtueller Abgasturbolader auf Basis physikalischer Modelle.
In: Motorprozesssimulation und Aufladung III, pp. 110-126,
Renningen, Expert-Verlag, 3. Tagung Motorprozesssimulation und Aufladung, Berlin, 16. und 17. Mai 2011, ISBN 978-3-8169-3073-0,
[Conference or Workshop Item]

Keil, T. ; Pelz, P. F. ; Ludwig, G. (2011):
Cloud Cavitation and Cavitation Erosion.
In: Advanced experimental and numerical techniques for cavitation, [Article]

Bedarff, T. ; Pelz, P. F. (2011):
Design and Prove of Concept of an Innovative Active Fluid Suspension System.
In: VDI-Berichte ; 2138, In: Elektrik, Mechanik und Hydraulik in der Anwendung / VDI/VDE-Tagung mit Fachausstellung Antriebssysteme 2011 : Nürtingen bei Stuttgart, 13. und 14. September 2011, pp. 283-294, Düsseldorf, VDI-Verlag, ISBN 978-3-18-092138-9,
[Book Section]

Pelz, P. F. ; Lorenz, U. (2011):
Effiziente Energiewandlung als Optimierungs- und Skalierungsaufgabe.
In: Forschen : Wissensschaftsmagazin der Technischen Universität Darmstadt, 2011 (1), vmm Wirtschaftsverlag, ISSN 1868-9035,
[Article]

Bedarff, T. ; Pelz, P. F. (2011):
Schwingungsminderung durch ein aktives hydropneu-matisches Feder-Dämpfer-System : Entwicklung eines neuartigen Aktuators zur aktiven Schwingungsminderung im Automobilbereich.
In: VDI-Berichte ; 2164, In: 2. VDI-Fachtagung Schwingungsdämpfung : Leonberg, 16. und 17. November 2011, pp. 93-106, Düsseldorf, VDI-Verlag, ISBN 978-3-18-092164-8,
[Book Section]

Pelz, P. F. ; Dimitrov, M. (2011):
Verluste bei periodischen Strömungen – Beschreibung mittels spezifischer Dissipationsleistung, Theorie und Experiment.
In: VDI-Berichte ; 2164, In: 2. VDI-Fachtagung Schwingungsdämpfung : Leonberg, 16. und 17. November 2011, pp. 55-68, Düsseldorf, VDI-Verlag, ISBN 978-3-18-092164-8,
[Book Section]

Pelz, P. F. (2011):
Vom Glück Ingenieur zu sein : Vortrag.
In: Berufsinformationstage bei der Fa. Samson AG, -, [Article]

Karstadt, S. ; Heß, M. ; Matyschok, B. ; Pelz, P. F. (2010):
The Influence of Tip Clearance on the Acoustic and Aerodynamic Characteristics of Fans.
In: Proceedings of the ASME Turbo Expo 2010, pp. 39-47, New York, ASME, ISBN 978-0-7918-4402-1,
DOI: 10.1115/GT2010-22082,
[Book Section]

Pelz, P. F. ; Bedarff, T.
Doujak, Eduard (ed.) (2010):
Studies on the maximal harvestable hydropower in open channels – Application to a water wheel and a turbine.
In: Reliable hydropower for a safe and sustainable power production, pp. 765-774,
Wien, Institute for Energy Systems and Thermodynamics, 16th International Seminar on Hydropower Plants, Wien, 24. - 26. November 2010, ISBN 978-3-9501937-6-3,
[Conference or Workshop Item]

Pelz, P. F. ; Karstadt, S. (2010):
Tip Clearance Losses - A Physical Based Scaling Method.
In: International Journal of Fluid Machinery and Systems, 3 (4), pp. 279-84. [Article]

Pelz, P. F. ; Karstadt, S. (2010):
Tip Clearance Losses – A Physical Based Scaling Method.
In: Fifth Conference on Pumps and Systems (2010 ICPF),
Hangzhou, China, International Conference on Pumps and Systems 2010, Hangzhou, China, 18–21 October 2010, [Conference or Workshop Item]

Pelz, P. F. ; Puff, M. ; Wirnitzer, A. (2010):
Entwicklung von aufwandsoptimierten Prüfmethoden zur Charakterisierung und Harshnessbeurteilung von Luftfedern.
In: Materials Testing, 52 (9), pp. 621-631. Carl Hanser Verlag, ISSN 0025-5300,
DOI: 10.3139/120.110170,
[Article]

Pelz, P. F. (2010):
Fluidtechnik zwischen Funktion, Aufwand und Verfügbarkeit.
In: Konstruktion: Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, 62 (3), p. 3. Springer-VDI-Verlag, ISSN 0720-5953,
[Article]

Bedarff, T. ; Pelz, P. F. (2010):
An active suspension with reduced complexity.
In: Conference Proceedings 7. IFK, 3, pp. 393-404. [Article]

Heß, M. ; Matyschok, B. ; Pelz, P. F. (2010):
Aufwertung bei Axialventilatoren - Einfluss von Reynolds-Zahl, relativer Rauheit und Betriebspunkt auf Wirkungsgrad und Druckziffer.
In: VDI-Berichte, 2112, In: Ventilatoren : Entwicklung - Planung - Betrieb, pp. 189-198,
Düsseldorf, VDI-Verlag, 6. VDI-Fachtagung Ventilatoren, Braunschweig, 16. und 17. November 2010, ISBN 9783180921129,
[Conference or Workshop Item]

Bevern, S. ; Thurner, J. ; Pelz, P. F. ; Holz, F. (2010):
Das dynamische Betriebsverhaltens von Schraubenpumpen – ein neuer innovativer Berechnungsansatz.
In: VDI-Berichte, 2101, In: Schraubenmaschinen 2010, pp. 221-232,
Düsseldorf, VDI-Verlag, 8. VDI-Fachtagung Schraubenmaschinen 2010, Dortmund, 5. und 6. Oktober 2010, ISBN 783180921010,
[Conference or Workshop Item]

Puff, M. ; Pelz, P. F. ; Wirnitzer, Andreas (2010):
Development of an optimized measurement method for characterizing air springs and its harshness behaviour.
In: Materials Testing-Materials and Components Technology and Application, 52, pp. 621-631. [Article]

Wang, Q. ; Pelz, P. F. ; Matyschok, B. (2010):
Numerische Simulation von turbulenzbedingtem Schall mit OpenFOAM.
[Report]

Heß, M. ; Pelz, P. F. (2010):
On Reliable Performance Prediction of Axial Turbomachines.
In: Proceedings of the ASME Turbo Expo 2010, pp. 139-150, New York, ASME, ISBN 978-0-7918-4402-1,
[Book Section]

Pelz, P. F. ; Heß, M. (2010):
Scaling Friction and Inertia Losses for the Performance Prediction of Turbomachines.
In: 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010 (ISROMAC-13), pp. 401-405,
Red Hook, NY, Curran, 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-13), Honolulu, Hawaii, 4 - 7 April 2010, ISBN 978-1-61738-848-4,
[Conference or Workshop Item]

Stonjek, S. ; Pelz, P. F. (2010):
Wirkungsgradaufwertung bei Radialventilatoren.
In: VDI-Berichte, In: 6. VDI-Fachtagung Ventilatoren: Entwicklung-Pianung-Betrieb, pp. 199-210, Düsseldorf, VDI-Verlag, ISBN 9783180921129,
[Book Section]

Heß, M. ; Pelz, P. F. (2009):
Comparison of Measurements on Axial Fans and Performance Prediction Using Common Scale-up Methods at Part and Overload.
In: Proceedings of FEDSM2009, p. 78200,
New York, The American Society of Mechanical Engineers, ASME Fluids Engineering Division Summer Meeting, Vail, Colorado, USA, August, 2-6, 2009, [Conference or Workshop Item]

Hamadeh, N. ; Pelz, P. F. ; Stoffel, B. ; Ludwig, G. (2009):
Determination of the Tensile Strength and the Nuclei Concentration by Means of the In-Situ-Nozzle.
In: 7th International Symposium on Cavitation 2009 ; Vol. 2, pp. 749-757,
Red Hook, Curran Associates, International Symposium on Cavitation 2009, Ann Arbor, 16-20 August, 2009, ISBN 978-1-61782-642-9,
[Conference or Workshop Item]

Pelz, P. F. ; Puff, M. (2009):
Entwicklung einer Prüfspezifikation zur Charakterisierung von Luftfedern.
In: FAT-Schriftenreihe, 223, Frankfurt, M., FAT, [Book]

Pelz, P. F. ; Ferbert, A. (2009):
On pressure and temperature waves within a cavitation bubble.
In: 7th International Symposium on Cavitation 2009 ; Vol. 1, pp. 112-120,
Red Hook, Curran Associates, International Symposium on Cavitation 2009, Ann Arbor, 16-20 August, 2009, ISBN 978-1-61782-642-9,
[Conference or Workshop Item]

Wang, Q. ; Heß, M. ; Matyschok, B. ; Pelz, P. F. (2009):
Simulation of the Flow and Acoustic Field of a Fan.
pp. 1-6, Conference on Modelling Fluid Flow (CMFF’09) and The 14th International Conference on Fluid Flow Technologies, Budapest, Hungary, September 9-12, 2009, [Conference or Workshop Item]

Rösner, J. ; Pelz, P. F. ; Bootz, ; Kemnitz, (2008):
Power Demand of Load Adaptive Attenuation of Pressure Pulsation in Automotive Systems.
In: IFK, [Article]

Bischof, V. ; Stoffel, B. ; Pelz, P. F. (2008):
Self-optimisation of pumping modules with hydrodynamic interaction.
In: Pump Users International Forum, [Article]

Schmied, B. ; Köck, G. ; Pelz, P. F. (2007):
Buchse mit Sensoreinrichtung.
[Standards, patents]

Pelz, P. F. ; Mess, M. (2007):
Luftfederung und Luftdämpfung im Spannungsfeld Komfort, Dynamik und Sicherheit.
In: ATZ, 109 (03), [Article]

Pelz, P. F. (2007):
Beschreibung von pneumatischen Dämpfungssystemen mit dimensionsanalytischen Methoden.
In: VDI Bericht 2003, Wiesloch, [Report]

Pelz, P. F.
Eickhoff, Mathias (ed.) (2007):
Dimensionieren und prinzipielles Verhalten von Luftfeder-/Dämpfermodulen.
In: Tagung Fahrwerk-Vertikaldynamik: Systeme und Komponenten,
Essen, Tagung Fahrwerk-Vertikaldynamik, Haus der Technik, Essen, 13.11.2007 - 14.11.2007, [Conference or Workshop Item]

Rösner, J. ; Pelz, P. F. ; Bootz, A. ; Kemnitz, R. (2007):
Lastadaptive Pulsationsminderung in Hydraulikschläuchen.
In: VDI-Bericht ; 2003, In: Schwingungsdämpfung : Modellbildung, numerische Umsetzung, experimentelle Verfahren, praxisrelevante passive und adaptive Anwendungen ; Tagung Wiesloch, 16. und 17. Oktober 2007, pp. 195-210, Düsseldorf, VDI-Verlag, ISBN 978-3-18092-003-0,
[Book Section]

Pelz, P. F. ; Brüger, T. ; Merk, J. (2007):
Numerische Festigkeitsauslegung von Luftfedern.
In: MP Materials testing, 49 (9), pp. 447-454. Carl Hanser Verlag GmbH & Co. KG, ISSN 0025-5300,
[Article]

Pelz, P. F. (2005):
The future of air-spring systems in vehicle suspension.
In: Vehicle Dynamics, [Article]

Pelz, P. F. (2005):
Luftfederung und Luftdämpfung.
In: Tagung Kraftfahrzeugstoßdämpfer, [Article]

Pelz, P. F. ; Sonnenburg, R. (2004):
Bestimmung komfortoptimaler Designparameter eines Luft-Feder-Dämpfers im Fahrzeugmodell Vergleich mit konventioneller hydraulischer Dämpfung.
In: VDI-Bericht, 1736, In: VDI Tagung „Berechnung und Simulation im Fahrzeugbau“ 29-30. September 2004, Würzburg,
[Conference or Workshop Item]

Pelz, P. F. ; Müller, (2004):
Packaging von Luftfedersystemen.
In: CTI Tagung Federung und Dämpfung im Fahrwerk, [Article]

Häusler, ; Brüger, ; Pelz, P. F. (2004):
Werkstoffbeschreibung und Simulation von Bauteilen aus geschäumten Polyurethanen (MCU).
In: VDI Bericht 1736 zur Tagung Berechung und Simulation im Fahrzeugbau, [Report]

Pelz, P. F. ; Buttenbender, J. (2004):
The dynamic stiffness of an air-spring.
In: International Conference on Noise & Vibration Engineering: ISMA2004, pp. 1727-1736, Leuven, ISMA Publ., ISBN 9073802822,
[Book Section]

Freitag, E. ; Pelz, P. F. (2003):
Stick-Slip - ein Problem bei Plungerzylindern - Theorie und Experiment.
In: Ölhydraulik und Pneumatik, 47 (1), pp. 30-35. Krausskopf, ISSN 0029-8697,
[Article]

Freitag, E. ; Pelz, P. F. (2002):
Stick Slip – ein Beitrag zur experimentellen und theoretischen Untersuchung verschiedener Einflüsse auf Stick Slip am Beispiel eines Tauchkolbens.
In: Internationale Dichtungstagung 12th ISC, pp. 257-278,
Frankfurt am Main, Fachverband Fluidtechnik im VDMA, Internationale Dichtungstagung 12th ISC, Stuttgart, September 10 - 11, 2002, [Conference or Workshop Item]

Pelz, P. F. ; Böcking, J. ; Oberle, R. ; Broock, U. von ; Jaschke, H. (2002):
Simulation eines Luft-Feder-Dämpfers (LFD).
In: VDI Bericht 1701 zur Tagung Berechung und Simulation im Fahrzeugbau, [Report]

Pelz, P. F. ; Freitag, E. (2002):
Ursachen für Stick-Slip bei Hydraulikkolben - Theorie und Experiment.
In: VDI Bericht ; 1736, In: Reibung und Schwingungen in Fahrzeugen, Maschinen und Anlagen ; Tagung Hannover 26. und 27. November 20022, pp. 217-230, Düsseldorf, VDI-Verlag, ISBN 3-18-091736-9,
[Book Section]

Pelz, P. F. (2001):
Über die Strömungsmechanik in chromatographischen Säulen.
Darmstadt, Techn. Univ., TU Darmstadt,
[Ph.D. Thesis]

Pelz, P. F.
Hempel, Jürgen (ed.) (2001):
Die Rheologie der Kautschukmischungen.
In: Elastomere Werkstoffe, pp. 1-25, Weinheim, Freudenberg Forschungsdienste, ISBN 978-3-00-010274-5,
[Book Section]

Pelz, P. F. ; Spurk, ; Müller, (1998):
Reducing mixing at the outlet bore of a cylinder.
In: Archive of Applied Mechanics, 68, pp. 395-406. [Article]

Pelz, P. F. (1998):
A kinematic methods for calculating the breakthrough curve for mixing.
In: ISSEC Annual Symposium, [Article]

Pelz, P. F. ; Spurk, (1997):
Konvektive Vermischung bei Querschnittsänderung.
In: Tagung der Deutschen Rheologischen Gesellschaft, [Article]

This list was generated on Tue Oct 19 04:41:27 2021 CEST.