TU Darmstadt / ULB / TUbiblio

Browse by Person

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Date | Language
Number of items: 107.

Stich, Stephan ; Ding, Kuan ; Muhammad, Qaisar Khushi ; Porz, Lukas ; Minnert, Christian ; Rheinheimer, Wolfgang ; Durst, Karsten ; Rödel, Jürgen ; Frömling, Till ; Fang, Xufei (2021):
Room-temperature dislocation plasticity in SrTiO3 tuned by defect chemistry.
In: Journal of the American Ceramic Society, Wiley, ISSN 0002-7820,
DOI: 10.1111/jace.18118,
[Article]

Höfling, Marion ; Zhou, Xiandong ; Riemer, Lukas M. ; Bruder, Enrico ; Liu, Binzhi ; Zhou, Lin ; Groszewicz, Pedro B. ; Zhuo, Fangping ; Xu, Bai-Xiang ; Durst, Karsten ; Tan, Xiaoli ; Damjanovic, Dragan ; Koruza, Jurij ; Rödel, Jürgen (2021):
Control of polarization in bulk ferroelectrics by mechanical dislocation imprint.
In: Science (New York, N.Y.), 372 (6545), pp. 961-964. ISSN 1095-9203, e-ISSN 1095-9203,
DOI: 10.1126/science.abe3810,
[Article]

Keil, Tom ; Utt, Daniel ; Bruder, Enrico ; Stukowski, Alexander ; Albe, Karsten ; Durst, Karsten (2021):
Solid solution hardening in CrMnFeCoNi-based high entropy alloy systems studied by a combinatorial approach.
In: Journal of Materials Research, 2021, pp. 1-13. Springer, ISSN 0884-2914,
DOI: 10.1557/s43578-021-00205-6,
[Article]

Zhu, Tingting ; Ding, Kuan ; Oshima, Yu ; Amiri, Anahid ; Bruder, Enrico ; Stark, Robert W. ; Durst, Karsten ; Matsunaga, Katsuyuki ; Nakamura, Atsutomo ; Fang, Xufei (2021):
Switching the fracture toughness of single-crystal ZnS using light irradiation.
In: Applied Physics Letters, 118 (15), p. 154103. AIP Publishing, ISSN 0003-6951,
DOI: 10.1063/5.0047306,
[Article]

Fang, Xufei ; Bishara, Hanna ; Ding, Kuan ; Tsybenko, Hanna ; Porz, Lukas ; Höfling, Marion ; Bruder, Enrico ; Li, Yingwei ; Dehm, Gerhard ; Durst, Karsten (2021):
Nanoindentation pop-in in oxides at room temperature: Dislocation activation or crack formation?
In: Journal of the American Ceramic Society, 104 (9), pp. 4728-4741. Wiley, ISSN 0002-7820,
DOI: 10.1111/jace.17806,
[Article]

Porz, Lukas ; Klomp, Arne J. ; Fang, Xufei ; Li, Ning ; Yildirim, Can ; Detlefs, Carsten ; Bruder, Enrico ; Höfling, Marion ; Rheinheimer, Wolfgang ; Patterson, Eric A. ; Gao, Peng ; Durst, Karsten ; Nakamura, Atsutomo ; Albe, Karsten ; Simons, Hugh ; Rödel, Jürgen (2021):
Dislocation-toughened ceramics.
In: Materials Horizons, 2021, Royal Society of Chemistry, ISSN 2051-6347,
DOI: 10.1039/D0MH02033H,
[Article]

Fang, Xufei ; Ding, Kuan ; Minnert, Christian ; Nakamura, Atsutomo ; Durst, Karsten (2021):
Dislocation-based crack initiation and propagation in single-crystal SrTiO3.
In: Journal of Materials Science, 2021 (56), pp. 5479-5492. Springer, ISSN 0022-2461,
DOI: 10.1007/s10853-020-05587-2,
[Article]

Bruns, Sebastian ; Uesbeck, Tobias ; Weil, Dominik ; Möncke, Doris ; van Wüllen, Leo ; Durst, Karsten ; de Ligny, Dominique (2021):
Influence of Al2O3 Addition on Structure and Mechanical Properties of Borosilicate Glasses. (Publisher's Version)
In: Frontiers in Materials, 7, Frontiers, ISSN 2296-8016,
DOI: 10.26083/tuprints-00019235,
[Article]

Fang, Xufei ; Ding, Kuan ; Janocha, Stephan ; Minnert, Christian ; Rheinheimer, Wolfgang ; Frömling, Till ; Durst, Karsten ; Nakamura, Atsutomo ; Rödel, Jürgen (2020):
Nanoscale to microscale reversal in room-temperature plasticity in SrTiO 3 by tuning defect concentration.
In: Scripta Materialia, (188), pp. 228-232. Elsevier Science Publishing, ISSN 13596462,
DOI: 10.1016/j.scriptamat.2020.07.033,
[Article]

Bruns, Sebastian ; Petho, Laszlo ; Minnert, Christian ; Michler, Johann ; Durst, Karsten (2020):
Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting.
In: Materials & Design, 186, Elsevier, ISSN 02641275,
DOI: 10.25534/tuprints-00011386,
[Article]

Minnert, Christian ; Oliver, Warren C. ; Durst, Karsten (2020):
New ultra-high temperature nanoindentation system for operating at up to 1100 °C.
In: Materials & Design, 192, p. 108727. Elsevier, ISSN 0264-1275,
DOI: 10.25534/tuprints-00013342,
[Article]

Keil, Tom ; Bruder, Enrico ; Durst, Karsten (2019):
Exploring the compositional parameter space of high-entropy alloys using a diffusion couple approach.
In: Materials & Design, 176, p. 107816. Elsevier, ISSN 02641275,
DOI: 10.1016/j.matdes.2019.107816,
[Article]

Minnert, Christiane ; Kuhnt, M. ; Bruns, S. ; Marshal, A. ; Pradeep, KG ; Marsilius, Mie ; Bruder, Enrico ; Durst, Karsten (2018):
Study on the embrittlement of flash annealed Fe85. 2B9. 5P4Cu0. 8Si0. 5 metallic glass ribbons.
In: Materials & Design, (156), pp. 252-261. Elsevier Science Publishing, ISSN 02641275,
DOI: 10.1016/j.matdes.2018.06.055,
[Article]

Javaid, Farhan ; Durst, Karsten (2018):
Stress-driven grain boundary movement during nanoindentation in tungsten at room temperature.
In: Materialia, (1), pp. 99-103. Elsevier Science Publishing, [Article]

Javaid, Farhan ; Xu, Y. ; Bruder, Enrico ; Durst, Karsten (2018):
Indentation size effectin tungsten: Quantification of geometrically necessary dislocations underneath the indentations using HR-EBSD.
In: Materials Characterization, (142), pp. 39-42. ELSEVIER SCIENCE INC, USA, ISSN 10445803,
DOI: 10.1016/j.matchar.2018.05.016,
[Article]

Ndlovu, S.N. ; Durst, Karsten ; Göken, M.
Fischer, Alfons ; Bobzin, Kirsten (eds.) (2018):
Deformation of WC-Co Hardmetals During Scratch Testing.
In: Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection, pp. 171-177, Weinheim, Wiley, ISBN 9783527323661,
DOI: 10.1002/9783527628513.ch20,
[Book Section]

Minnert, Christian ; Kuhnt, Markus ; Bruns, Sebastian ; Marshal, Amalraj ; Pradeep, Konda Gokuldoss ; Marsilius, Mie ; Bruder, Enrico ; Durst, Karsten (2018):
Study on the embrittlement of flash annealed Fe85.2B9.5P4Cu0.8Si0.5 metallic glass ribbons.
In: Materials and design, 156, pp. 252-261. Elsevier Ltd., ISSN 0261-3069,
DOI: https://www.sciencedirect.com/science/article/pii/S0264127518305227,
[Article]

Benzine, Omar ; Bruns, Sebastian ; Pan, Z. ; Durst, Karsten ; Wondraczek, L. (2018):
Local deformation of glasses is mediated by rigidity fluctuation and granularity.
In: ChemRxiv : the Preprint Server for Chemistry, ChemRxiv, [Article]

Javaid, Farhan ; Johanns, K. E. ; Patterson, Eric A. ; Durst, Karsten (2018):
Temperature dependence of indentation size effect, dislocation pile‐ups, and lattice friction in (001) strontium titanate.
In: Journal of the American Ceramic Society, 101 (1), pp. 356-364. Wiley, ISSN 00027820,
[Article]

Braak, R. ; May, U. ; Onuseit, L. ; Repphun, G. ; Guenther, M. ; Schmid, Christoph ; Durst, Karsten (2018):
Accelerated thermal degradation of DLC-coatings via growth defects.
In: Surface and Coatings Technology, 349, pp. 272-278. Elsevier, ISSN 0257-8972,
DOI: 10.1016/j.surfcoat.2018.05.063,
[Article]

Bruder, Enrico ; Braun, Paul ; Rehman, H. U. ; Marceau, R. K. W. ; Taylor, A. S. ; Pippan, R. ; Durst, Karsten (2018):
Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys.
In: Scripta Materialia, 144, pp. 5-8. Elsevier Science Publishing, ISSN 1359-6462,
[Article]

Ayrikyan, A. ; Prach, Olena ; Khansur, N. H. ; Keller, S. ; Yasui, S. ; Itoh, M. ; Sakata, O. ; Durst, Karsten ; Webber, K. G. (2018):
Investigation of residual stress in lead-free BNT-based ceramic/ceramic composites.
In: Acta Materialia, 148, pp. 432-441. Elsevier, ISSN 1359-6454,
[Article]

Benzine, Omar ; Bruns, Sebastian ; Pan, Zhiwen ; Durst, Karsten ; Wondraczek, Lothar (2018):
Local Deformation of Glasses is Mediated by Rigidity Fluctuation on Nanometer Scale.
In: Advanced Science, (1800916), pp. 1-9. Wiley, ISSN 2198-3844,
DOI: 10.1002/advs.201800916,
[Article]

Yuan, Jia ; Li, Duan ; Johanns, Kurt E. ; Fasel, Claudia ; Durst, Karsten ; Kleebe, Hans-Joachim ; Shen, Zhijian ; Riedel, Ralf ; Ionescu, Emanuel (2017):
Preparation of dense SiHf(B)CN-based ceramic nanocomposites via rapid spark plasma sintering.
In: Journal of the European Ceramic Society, 37 (16), pp. 5157-5165. Elsevier Science Publishing, ISSN 0955-2219,
DOI: 10.1016/j.jeurceramsoc.2017.04.066,
[Article]

Maier-Kiener, V. ; Durst, Karsten (2017):
Advanced nanoindentation testing for studying strain-rate sensitivity and activation volume.
In: JOM, 69 (11), pp. 2246-2255. ISSN 1047-4838,
[Article]

Bruns, Sebastian ; Johanns, Kurt E. ; Rehman, Hamad ur ; Pharr, G. M. ; Durst, Karsten (2017):
Constitutive modeling of indentation cracking in fused silica.
In: Journal of the American Ceramic Society, 100 (5), pp. 1928-1940. ISSN 00027820,
[Article]

Javaid, Farhan ; Durst, Karsten (2017):
Indentation size effect and dislocation structure evolution in (001) oriented SrTiO3 Berkovich indentations: HR-EBSD and etch-pit analysis.
In: Acta Materialia, (139), pp. 1-10. ISSN 1359-6454,
[Article]

Zehnder, C. ; Bruns, Sebastian ; Peltzer, J. N. ; Durst, Karsten ; Korte-Kerzel, S. ; Möncke, D. (2017):
Influence of Cooling Rate on Cracking and Plastic Deformation during Impact and Indentation of Borosilicate Glasses.
In: Frontiers in Materials, (4), p. 5. ISSN 2296-8016,
[Article]

Maier-Kiener, V. ; An, X. ; Li, L. ; Zhang, Z. ; Pippan, R. ; Durst, Karsten (2017):
Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu-AlX solid solutions.
In: Journal of Materials Research, 32 (24), pp. 4583-4591. Cambridge University Press, ISSN 0884-2914,
[Article]

Maier-Kiener, V. ; An, X. ; Li, L. ; Zhang, Z. ; Pippan, Reinhard ; Durst, Karsten (2017):
Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu–AlX solid solutions.
In: Journal of Materials Research, 32 (24), pp. 4583-4591. ISSN 0884-2914,
[Article]

Rehman, Hamad ur ; Durst, Karsten ; Neumaier, S. ; Satoh, A. ; Reed, R. ; Göken, M. (2017):
On the temperature dependent strengthening of nickel by transition metal solutes.
In: Acta Materialia, (137), pp. 54-63. ISSN 1359-6454,
[Article]

Ast, J. ; Göken, M. ; Durst, Karsten (2017):
Size-dependent fracture toughness of tungsten.
In: Acta Materialia, (138), pp. 198-211. ISSN 1359-6454,
[Article]

Ast, Johannes ; Merle, Benoit ; Durst, Karsten ; Göken, Mathias (2016):
Fracture toughness evaluation of NiAl single crystals by microcantilevers—a new continuous J-integral method.
In: Journal of Materials Research, 31 (23), pp. 3786-3794. Cambridge University Press, New York, NY, USA, ISSN 0884-2914,
DOI: 10.1557/jmr.2016.393,
[Article]

Javaid, Farhan ; Stukowski, Alexander ; Durst, Karsten (2016):
3D Dislocation Structure Evolution in Strontium Titanate: Spherical Indentation Experiments and MD Simulations.
In: Journal of the American Ceramic Society, 100 (3), pp. 1134-1145. ISSN 00027820,
DOI: 10.1111/jace.14626,
[Article]

Patterson, Eric A. ; Major, Marton ; Donner, Wolfgang ; Durst, Karsten ; Webber, Kyle G. ; Rödel, Jürgen (2016):
Temperature-Dependent Deformation and Dislocation Density in SrTiO3 (001) Single Crystals.
In: Journal of the American Ceramic Society, 99 (10), pp. 3411-3420. The American Ceramic Society, ISSN 0002-7820,
[Article]

Durst, Karsten ; Maier, Verena (2015):
Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals.
In: Current Opinion in Solid State and Materials Science, 19 (6), pp. 340-353. Elsevier Science Publishing, ISSN 13590286,
[Article]

Klausmann, Amon ; Morita, Koji ; Johanns, Kurt E. ; Fasel, Claudia ; Durst, Karsten ; Mera, Gabriela ; Riedel, Ralf ; Ionescu, Emanuel (2015):
Synthesis and high-temperature evolution of polysilylcarbodiimide-derived SiCN ceramic coatings.
In: Journal of the European Ceramic Society, 35 (14), pp. 3771-3780. Elsevier Science Publishing, ISSN 09552219,
[Article]

Maier, Verena ; Schunk, Christopher ; Göken, Mathias ; Durst, Karsten (2015):
Microstructure-dependent deformation behaviour of bcc-metals – indentation size effect and strain rate sensitivity.
In: Philosophical Magazine, 95 (16-18), pp. 1766-1779. TAYLOR & FRANCIS LTD, England, ISSN 1478-6435,
[Article]

Rehman, Hamad ur ; Durst, Karsten ; Neumeier, Steffen ; Parsa, Alireza B. ; Kostka, Aleksander ; Eggeler, Gunther ; Göken, Mathias (2015):
Nanoindentation studies of the mechanical properties of the μ phase in a creep deformed Re containing nickel-based superalloy.
In: Materials Science and Engineering: A, 634, pp. 202-208. ELSEVIER SCIENCE SA, Switzerland, ISSN 09215093,
[Article]

Choi, In-Chul ; Lee, Dong-Hyun ; Ahn, Byungmin ; Durst, Karsten ; Kawasaki, Megumi ; Langdon, Terence G. ; Jang, Jae-il (2015):
Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion.
In: Scripta Materialia, 94, pp. 44-47. PERGAMON-ELSEVIER SCIENCE LTD, ISSN 13596462,
[Article]

Blum, W. ; Eisenlohr, P. ; Prell, M. ; Durst, Karsten (2015):
Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests.
In: KOVOVE MATERIALY-METALLIC MATERIALS, 53 (4), pp. 199-205. REDAKCIA KOVOVE MATERIALY, Slovakia, ISSN 0023-432X,
[Article]

Merle, Benoit ; Maier, Verena ; Durst, Karsten (2014):
Experimental and theoretical confirmation of the scaling exponent 2 in pyramidal load displacement data for depth sensing indentation.
In: Scanning, 36 (5), pp. 526-529. WILEY-VCH Verlag GmbH & Co. KGaA, ISSN 01610457,
[Article]

Haag, Fabian ; Beitelschmidt, Denise ; Eckert, Jürgen ; Durst, Karsten (2014):
Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending – A nanoindentation and atomic force microscopy study.
In: Acta Materialia, 70, pp. 188-197. Pergamon-Elsevier Science LTD, ISSN 13596454,
[Article]

Ast, J. ; Przybilla, T. ; Maier, V. ; Durst, Karsten ; Göken, M. (2014):
Microcantilever bending experiments in NiAl - Evaluation, size effects, and crack tip plasticity.
In: Journal of Materials Research, 29 (18), pp. 2129-2140. Cambridge University Press, ISSN 0884-2914,
[Article]

Schmid, Christoph ; Hetzner, Harald ; Tremmel, Stephan ; Hilpert, Felix ; Durst, Karsten (2014):
Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings.
In: Advanced Materials Research, 996, pp. 14-21. Trans Tech Publications, Switzerland, ISSN 1662-8985,
[Article]

Ahmed, Furqan ; Krottenthaler, Markus ; Schmid, Christoph ; Durst, Karsten (2013):
Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy.
In: Surface and Coatings Technology, 237, pp. 255-260. Elsevier Science Publishing, ISSN 02578972,
[Article]

Schmid, Christoph ; Maier, V. ; Schaufler, J. ; Butz, B. ; Spiecker, E. ; Meier, S. ; Göken, M. ; Durst, Karsten (2013):
Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy.
In: Thin Solid Films, (528), pp. 263-268. ISSN 00406090,
DOI: 10.1016/j.tsf.2012.05.092,
[Article]

Depner-Miller, Udo ; Ellermeier, Jörg ; Scheerer, Herbert ; Oechsner, Matthias ; Bobzin, Kirsten ; Bagcivan, Nazlim ; Brögelmann, Tobias ; Weiß, Raphael ; Durst, Karsten ; Schmid, Christoph (2013):
Influence of application technology on the erosion resistance of DLC coatings.
In: Surface & Coatings Technology, 237, pp. 284-291. ISSN 0257-8972,
[Article]

Webler, R. ; Krottenthaler, M. ; Neumeier, S. ; Durst, Karsten ; Göken, M. (2013):
Local fracture toughness and residual stress measurements on NiAl bond coats by micro cantilever and fib-based bar milling tests.
In: Proceedings of the International Symposium on Superalloys, pp. 93-102, Hobroken, DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84885926632&partnerID=40&md5=cfda36f793747faa202f38e4f0e327f9,
[Book Section]

Haynes, J. ; Maier, V. ; Durst, Karsten ; Göken, M. (2013):
Strain-rate sensitivity (SRS) of nickel by instrumented indentation.
In: Conference Proceedings of the Society for Experimental Mechanics Series, 6, In: MEMS and Nanotechnology, pp. 47-52, New York, DOI: 10.1007/978-1-4614-4436-7_8,
[Book Section]

Maier, V. ; Merle, B. ; Göken, M. ; Durst, Karsten (2013):
An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures.
In: Journal of Materials Research, 28 (9), pp. 1177-1188. Cambridge University Press, ISSN 0884-2914,
[Article]

Krottenthaler, M. ; Schmid, Christoph ; Schaufler, J. ; Durst, Karsten ; Göken, M. (2013):
A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation.
In: Surface and Coatings Technology, (215), pp. 247-252. Elsevier Science Publishing Company, ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.08.095,
[Article]

Durst, Karsten ; Rehman, H. U. ; Merle, B. (2012):
Comment to paper "penetration depth and tip radius dependence on the correction factor in nanoindentation measurements" by J.M. Meza et al.
In: Journal of Materials Research, 27 (8), pp. 1205-1207. ISSN 0884-2914,
DOI: 10.1557/jmr.2012.41,
[Article]

Schaufler, J. ; Schmid, Christoph ; Durst, Karsten ; Göken, M. (2012):
Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending.
In: Thin Solid Films, (522), pp. 480-484. ISSN 00406090,
DOI: 10.1016/j.tsf.2012.08.031,
[Article]

Meszaros, R. ; Merle, B. ; Wild, M. ; Durst, Karsten ; Göken, M. ; Wondraczek, L. (2012):
Effect of thermal annealing on the mechanical properties of low-emissivity physical vapor deposited multilayer-coatings for architectural applications.
In: Thin Solid Films, 520 (24), pp. 7130-7135. ISSN 00406090,
DOI: 10.1016/j.tsf.2012.07.086,
[Article]

Merle, B. ; Maier, V. ; Göken, M. ; Durst, Karsten (2012):
Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness.
In: Journal of Materials Research, 27 (1), pp. 214-221. ISSN 0884-2914,
DOI: 10.1557/jmr.2011.245,
[Article]

Hetzner, H. ; Schaufler, J. ; Tremmel, S. ; Durst, Karsten ; Wartzack, S. (2012):
Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests.
In: Surface and Coatings Technology, 206, pp. 4864-4871. Elsevier Science Publishing Company, ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.05.077,
[Article]

Hetzner, H. ; Schaufler, J. ; Tremmel, S. ; Durst, Karsten ; Wartzack, S. (2012):
Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests.
In: Surface and Coatings Technology, (212), pp. 46-54. Elsevier Science Publishing Company, ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.09.012,
[Article]

Iqbal, F. ; Ast, J. ; Göken, M. ; Durst, Karsten (2012):
In situ micro-cantilever tests to study fracture properties of NiAl single crystals.
In: Acta Materialia, 60 (3), pp. 1193-1200. ISSN 13596454,
DOI: 10.1016/j.actamat.2011.10.060,
[Article]

Hetzner, H. ; Schaufler, J. ; Pejic, G. ; Tremmel, S. ; Durst, Karsten ; Wartzack, S. (2012):
Investigation on the tribological-mechanical behaviour of amorphous carbon coatings by load-scanning tests.
In: Materialwissenschaft und Werkstofftechnik, 43 (3), pp. 226-233. ISSN 0933-5137,
DOI: 10.1002/mawe.201200846,
[Article]

Webler, R. ; Krottenthaler, M. ; Neumaier, S. ; Durst, Karsten ; Göken, M. (2012):
Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests.
In: Superalloys, pp. 93-102. Wiley, DOI: 10.1002/9781118516430.ch10,
[Article]

Rehman, H. U. ; Ahmed, F. ; Schmid, Christoph ; Schaufler, J. ; Durst, Karsten (2012):
Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and cohesive zone FEM modeling.
In: Surface and Coatings Technology, 207, pp. 163-169. Elsevier Science Publishing Company, ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.06.049,
[Article]

Schaufler, J. ; Durst, Karsten ; Haas, T. ; Nolte, R. ; Höppel, H. W. ; Göken, M. (2012):
The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens.
In: International Journal of Fatigue, (37), pp. 1-7. Elsevier, ISSN 0142-1123,
DOI: 10.1016/j.ijfatigue.2011.09.008,
[Article]

Schaufler, J. ; Yang, G. ; Durst, Karsten ; Spiecker, E. ; Göken, M. (2011):
Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems.
In: Surface and Coatings Technology, 205 (11), pp. 3429-3433. ISSN 0257-8972,
DOI: 10.1016/j.surfcoat.2010.12.005,
[Article]

Zirkel, L. ; Maier, V. ; Durst, Karsten ; Münstedt, H. (2011):
Compression moduli of foamed films of fluorinated ethylene propylene copolymers determined by nanoindentation.
In: Polymer Testing, 30 (3), pp. 286-293. DOI: 10.1016/j.polymertesting.2011.01.005,
[Article]

Franke, O. ; Göken, M. ; Meyers, M. A. ; Durst, Karsten ; Hodge, A. M. (2011):
Dynamic nanoindentation of articular porcine cartilage.
In: Materials Science and Engineering C, 31 (4), pp. 789-795. DOI: 10.1016/j.msec.2010.12.005,
[Article]

Lodes, M.A. ; Hartmaier, A. ; Göken, M. ; Durst, Karsten (2011):
Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations.
In: Acta Materialia, 59 (11), pp. 4264-4273. ISSN 1359-6454,
DOI: 10.1016/j.actamat.2011.03.050,
[Article]

Böhner, A. ; Maier, V. ; Durst, Karsten ; Höppel, H. W. ; Göken, M. (2011):
Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials.
In: Advanced Engineering Materials, 13 (4), pp. 251-255. ISSN 1438-1656,
DOI: 10.1002/adem.201000270,
[Article]

Jennett, N.M. ; Göken, M. ; Durst, Karsten (2011):
Nano-mechanical testing in materials research and development.
In: Philosophical Magazine, 91 (7-9), pp. 1035-1036. Taylor & Francis, ISSN 1478-6435,
DOI: 10.1080/14786435.2011.561524,
[Article]

Maier, V. ; Durst, Karsten ; Mueller, J. ; Backes, B. ; Höppel, H. W. ; Göken, M. (2011):
Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al.
In: Journal of Materials Research, 26 (11), pp. 1421-1430. ISSN 0884-2914,
DOI: 10.1557/jmr.2011.156,
[Article]

Ahmed, F. ; Bayerlein, K. ; Rosiwal, S.M. ; Göken, M. ; Durst, Karsten (2011):
Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling.
In: Acta Materialia, 59 (14), pp. 5422-5433. ISSN 1359-6454,
DOI: 10.1016/j.actamat.2011.05.015,
[Article]

Rausch, M. H. ; Leipertz, A. ; Fröba, A. P. ; Jakobs, P.-J. ; Durst, Karsten ; Göken, M. (2011):
Studies on the origin of dropwise condensation of steam on ion implanted metallic surfaces.
In: Chemie-Ingenieur-Technik, 83 (4), pp. 545-551. DOI: 10.1002/cite.201000182,
[Article]

Ahmed, F. ; Durst, Karsten ; Rosiwal, S. ; Fandrey, J. ; Schaufler, J. ; Göken, M. (2010):
In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy.
In: Surface and Coatings Technology, 204 (6-7), pp. 1022-1025. ISSN 0257-8972,
DOI: 10.1016/j.surfcoat.2009.04.030,
[Article]

Durst, Karsten ; Hofmann, S. ; Backes, B. ; Mueller, J. ; Göken, M. (2010):
Microimprinting of nanocrystalline metals - Influence of microstructure and work hardening.
In: Journal of Materials Processing Technology, Elsevier, 210 (13), pp. 1787-1793. ISSN 0924-0136,
DOI: 10.1016/j.jmatprotec.2010.06.010,
[Article]

Brandt, B. ; Zollfrank, C. ; Franke, O. ; Fromme, J. ; Göken, M. ; Durst, Karsten (2010):
Micromechanics and ultrastructure of pyrolysed softwood cell walls.
In: Acta biomaterialia, 6 (11), pp. 4345-4351. ISSN 1878-7568,
DOI: 10.1016/j.actbio.2010.05.026,
[Article]

Nikulina, E. ; Durst, Karsten ; Göken, M. ; Völkl, R. ; Glatzel, U. (2010):
Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission electron microscopy and nanoindentation.
In: International Journal of Materials Research, 101 (5), pp. 585-588. Carl Hanser Verlag GmbH & Co. KG, ISSN 1862-5282,
DOI: 10.3139/146.110316,
[Article]

Kiener, D. ; Durst, Karsten ; Rester, M. ; Minor, A. M. (2010):
Revealing deformation mechanisms with nanoindentation.
In: JOM : The Journal of the Minerals, Metals & Materials Society, 61 (3), pp. 14-23. Springer, ISSN 1047-4838,
DOI: 10.1007/s11837-009-0036-4,
[Article]

Jang, Y.-S. ; Janko, M. ; Maier, V. ; Durst, Karsten ; Travitzky, N. ; Zollfrank, C. (2010):
SiC ceramic micropatterns from polycarbosilanes.
In: Journal of the European Ceramic Society, 30 (13), pp. 2773-2779. ISSN 0955-2219,
DOI: 10.1016/j.jeurceramsoc.2010.05.019,
[Article]

Brandt, B. ; Lohbauer, U. ; Göken, M. ; Durst, Karsten (2010):
The influence of particle size on the mechanical properties of dental glass ionomer cements.
In: Advanced Engineering Materials, 12 (12), pp. B684-B689. ISSN 1438-1656,
DOI: 10.1002/adem.201080067,
[Article]

Das, J. ; Pauly, S. ; Boström, M. ; Durst, Karsten ; Göken, M. ; Eckert, Jürgen (2009):
Designing bulk metallic glass and glass matrix composites in martensitic alloys.
In: Journal of Alloys and Compounds, 483 (1-2), pp. 97-101. Elsevier, ISSN 0925-8388,
DOI: 10.1016/j.jallcom.2008.08.139,
[Article]

Wang, Y. ; Mayer, K.-H. ; Scholz, A. ; Berger, C. ; Chilukuru, H. ; Durst, Karsten ; Blum, W. (2009):
Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650 °C.
In: Materials science and engineering A, 510-511 (C), pp. 180-184. Elsevier Science, ISSN 0921-5093,
DOI: 10.1016/j.msea.2008.04.116,
[Article]

Schaufler, J. ; Durst, Karsten ; Massler, O. ; Göken, M. (2009):
In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading.
In: Thin Solid Films, 517 (5), pp. 1681-1685. ISSN 0040-6090,
DOI: 10.1016/j.tsf.2008.09.104,
[Article]

Franke, O. ; Durst, Karsten ; Göken, M. (2009):
Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples.
In: Journal of Materials Research, 24 (3), pp. 1127-1134. ISSN 0884-2914,
DOI: 10.1557/jmr.2009.0135,
[Article]

Backes, B. ; Durst, Karsten ; Amberger, D. ; Göken, M. (2009):
Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy.
In: Metallurgical and Materials Transactions A, 40 (2), pp. 257-261. DOI: 10.1007/s11661-008-9720-1,
[Article]

Sadrabadi, P. ; Durst, Karsten ; Göken, M. ; Blum, W. (2009):
Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits.
In: Philosophical Magazine Letters, 89 (6), pp. 391-398. DOI: 10.1080/09500830902984554,
[Article]

Blum, W. ; Li, Y. J. ; Durst, Karsten (2009):
Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures.
In: Acta Materialia, 57 (17), pp. 5207-5217. ISSN 1359-6454,
DOI: 10.1016/j.actamat.2009.07.030,
[Article]

Sadrabadi, P. ; Durst, Karsten ; Göken, M. (2009):
Study on the indentation size effect in CaF2: Dislocation structure and hardness.
In: Acta Materialia, 57 (4), pp. 1281-1289. ISSN 1359-6454,
DOI: 10.1016/j.actamat.2008.11.015,
[Article]

Brackes, B. ; Huang, Y. Y. ; Göken, M. ; Durst, Karsten (2009):
The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism-based strain gradient plasticity theory.
In: Journal of Materials Research, 24 (3), pp. 1197-1207. ISSN 0884-2914,
DOI: 10.1557/jmr.2009.0123,
[Article]

Durst, Karsten ; Göken, M. ; Pharr, G. M. (2008):
Indentation size effect in spherical and pyramidal indentations.
In: Journal of Physics D: Applied Physics, 41 (7), pp. 074005. IOP Publishing, ISSN 0022-3727,
DOI: 10.1088/0022-3727/41/7/074005,
[Article]

Gelse, K. ; Mühle, C. ; Franke, O. ; Park, J. ; Jehle, M. ; Durst, Karsten ; Göken, M. ; Henning, F. ; Mark, K. von der ; Schneider, H. (2008):
Cell-based resurfacing of large cartilage defects: Long-term evaluation of grafts from autologous transgene-activated periosteal cells in a porcine model of osteoarthritis.
In: Arthritis and Rheumatism, 58 (2), pp. 475-488. DOI: 10.1002/art.23124,
[Article]

Ndlovu, S. ; Durst, Karsten ; Hoeppel, H.W. ; Göken, M. (2008):
Study on the local damage mechanisms in WC-Co hard metals during scratch testing.
In: Materials Research Society Symposium Proceedings, (1049), pp. 75-81. DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-55249096010&partnerID=40&md5=fb11b97123bb01635ff35d1ff0f09426,
[Article]

Wellmann, P. J. ; Hens, P. ; Sakwe, S. A. ; Queren, D. ; Müller, R. ; Durst, Karsten ; Göken, M. (2007):
Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth.
In: Materials Science Forum, (556-557), pp. 259-262. Trans Tech Publications Switzerland, ISSN 1662-9752,
DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-38449110238&partnerID=40&md5=9602e1f5bf698501469fd048645295df,
[Article]

Durst, Karsten ; Franke, O. ; Böhner, A. ; Göken, M. (2007):
Indentation size effect in Ni-Fe solid solutions.
In: Acta Materialia, 55 (20), pp. 6825-6833. ISSN 1359-6454,
DOI: 10.1016/j.actamat.2007.08.044,
[Article]

Ndlovu, S. ; Durst, Karsten ; Göken, M. (2007):
Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing.
In: Wear, 263 (7-12), pp. 1602-1609. ISSN 0043-1648,
DOI: 10.1016/j.wear.2006.11.044,
[Article]

Franke, O. ; Durst, Karsten ; Maier, V. ; Göken, M. ; Birkholz, T. ; Schneider, H. ; Henning, F. ; Gelse, K. (2007):
Mechanical properties of hyaline and repair cartilage studied by nanoindentation.
In: Acta biomaterialia, 3 (6), pp. 873-881. ISSN 1878-7568,
DOI: 10.1016/j.actbio.2007.04.005,
[Article]

Franke, O. ; Durst, Karsten ; Göken, M. (2007):
Microstructure and local mechanical properties of Pt-modified nickel aluminides on nickel-base superalloys after thermo-mechanical fatigue.
In: Materials science and engineering A, 467 (1-2), pp. 15-23. ISSN 0921-5093,
DOI: 10.1016/j.msea.2007.02.069,
[Article]

Backes, B. ; Durst, Karsten ; Göken, M. (2006):
Determination of plastic properties of polycrystalline metallic materials by nanoindentation: Experiments and finite element simulations.
In: Philosophical Magazine, 86 (33-35), pp. 5541-5551. Taylor & Francis, ISSN 1478-6435,
DOI: 10.1080/14786430600735468,
[Article]

Durst, Karsten ; Backes, B. ; Franke, O. ; Göken, M. (2006):
Indentation size effect in metallic materials: Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations.
In: Acta Materialia, 54 (9), pp. 2547-2555. ISSN 1359-6454,
DOI: 10.1016/j.actamat.2006.01.036,
[Article]

Mueller, J. ; Durst, Karsten ; Amberger, D. ; Göken, M. (2006):
Local investigations of the mechanical properties of ultrafine grained metals by nanoindentations.
In: Materials Science Forum, (503-504), pp. 31-36. Trans Tech Publications Switzerland, ISSN 1662-9752,
DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-33646140270&partnerID=40&md5=6d9f68fd92aef88a176c6a042b6e3721,
[Article]

Durst, Karsten ; Backes, B. ; Göken, M. (2005):
Determination of plastic properties of poly crystalline metallic materials by nanoindentation - Experiments and finite element simulations.
In: Materials Research Society Symposium Proceedings, 841 (11.4), pp. 311-316. DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-23844499422&partnerID=40&md5=2a13dcf9518bb0e928a08192766f4482,
[Article]

Durst, Karsten ; Backes, B. ; Göken, M. (2005):
Indentation size effect in metallic materials: Correcting for the size of the plastic zone.
In: Scripta Materialia, 52 (11), pp. 1093-1097. Elsevier Science Publishing, ISSN 1359-6462,
DOI: 10.1016/j.scriptamat.2005.02.009,
[Article]

Durst, Karsten ; Göken, M. ; Vehoff, H. (2004):
Finite element study for nanoindentation measurements on two-phase materials.
In: Journal of Materials Research, 19 (1), pp. 85-93. ISSN 0884-2914,
[Article]

Durst, Karsten ; Göken, M. (2004):
Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys.
In: Materials science and engineering A, 387-389 (1-2 SPEC. ISS), pp. 312-316. ISSN 0921-5093,
DOI: 10.1016/j.msea.2004.03.079,
[Article]

Durst, Karsten ; Franke, O. ; Göken, M. (2004):
Nanoindentations as a local probe for the mechanical properties and alloying influences in nickel-base superalloys and aluminide coatings.
In: Proceedings of the International Symposium on Superalloys, pp. 467-476. [Article]

Schweitzer, E. ; Durst, Karsten ; Amberger, D. ; Göken, M. (2004):
The mechanical properties in the vicinity of grain boundaries in ultrafine-grained and polycrystalline materials studied by nanoindentations.
In: Materials Research Society Symposium Proceedings, (819), pp. 79-84. [Article]

Durst, Karsten ; Göken, M. ; Pharr, G. M. (2002):
Finite element simulation of spherical indentation in the elastic-plastic transition.
In: Materials Research and Advanced Techniques, 93 (9), pp. 857-861. DOI: 10.3139/146.020857,
[Article]

Durst, Karsten ; Göken, M. (2001):
Quantitative microstructural characterisation by atomic force microscopy and electron microscopy - A comparative study on the superalloy Waspaloy.
In: Praktische Metallographie, 38 (4), pp. 197-215. [Article]

This list was generated on Tue Oct 12 06:07:04 2021 CEST.