TU Darmstadt / ULB / TUbiblio

Browse by Person

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Date | Language
Jump to: English
Number of items: 95.

English

Minnert, Christiane and Kuhnt, M. and Bruns, S. and Marshal, A. and Pradeep, KG and Marsilius, Mie and Bruder, Enrico and Durst, Karsten (2018):
Study on the embrittlement of flash annealed Fe85. 2B9. 5P4Cu0. 8Si0. 5 metallic glass ribbons.
In: Materials & Design, Elsevier Science Publishing, pp. 252-261, (156), ISSN 02641275,
DOI: 10.1016/j.matdes.2018.06.055,
[Online-Edition: https://doi.org/10.1016/j.matdes.2018.06.055],
[Article]

Javaid, Farhan and Durst, Karsten (2018):
Stress-driven grain boundary movement during nanoindentation in tungsten at room temperature.
In: Materialia, Elsevier Science Publishing, pp. 99-103, (1), [Online-Edition: https://doi.org/10.1016/j.mtla.2018.04.002],
[Article]

Javaid, Farhan and Xu, Y. and Bruder, Enrico and Durst, Karsten (2018):
Indentation size effectin tungsten: Quantification of geometrically necessary dislocations underneath the indentations using HR-EBSD.
In: Materials Characterization, ELSEVIER SCIENCE INC, USA, pp. 39-42, (142), ISSN 10445803,
DOI: 10.1016/j.matchar.2018.05.016,
[Article]

Ndlovu, S.N. and Durst, Karsten and Göken, M.
Fischer, Alfons and Bobzin, Kirsten (eds.) (2018):
Deformation of WC-Co Hardmetals During Scratch Testing.
In: Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection, Weinheim, Wiley, pp. 171-177, DOI: 10.1002/9783527628513.ch20,
[Book Section]

Minnert, Christian and Kuhnt, Markus and Bruns, Sebastian and Marshal, Amalraj and Pradeep, Konda Gokuldoss and Marsilius, Mie and Bruder, Enrico and Durst, Karsten (2018):
Study on the embrittlement of flash annealed Fe85.2B9.5P4Cu0.8Si0.5 metallic glass ribbons.
In: Materials and design, Elsevier Ltd., pp. 252-261, 156, ISSN 0261-3069,
DOI: https://www.sciencedirect.com/science/article/pii/S0264127518305227,
[Article]

Benzine, Omar and Bruns, Sebastian and Pan, Z. and Durst, Karsten and Wondraczek, L. (2018):
Local deformation of glasses is mediated by rigidity fluctuation and granularity.
In: ChemRxiv : the Preprint Server for Chemistry, ChemRxiv, [Online-Edition: https://chemrxiv.org/articles/Local_Deformation_of_Glasses_I...],
[Article]

Javaid, Farhan and Johanns, K. E. and Patterson, Eric A. and Durst, Karsten (2018):
Temperature dependence of indentation size effect, dislocation pile‐ups, and lattice friction in (001) strontium titanate.
In: Journal of the American Ceramic Society, Wiley, pp. 356-364, 101, (1), ISSN 00027820,
[Article]

Braak, R. and May, U. and Onuseit, L. and Repphun, G. and Guenther, M. and Schmid, Christoph and Durst, Karsten (2018):
Accelerated thermal degradation of DLC-coatings via growth defects.
In: Surface and Coatings Technology, Elsevier, pp. 272-278, 349, ISSN 0257-8972,
DOI: 10.1016/j.surfcoat.2018.05.063,
[Article]

Bruder, Enrico and Braun, Paul and Rehman, H. U. and Marceau, R. K. W. and Taylor, A. S. and Pippan, R. and Durst, Karsten (2018):
Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys.
In: Scripta Materialia, Elsevier Science Publishing, pp. 5-8, 144, ISSN 1359-6462,
[Article]

Ayrikyan, A. and Prach, Olena and Khansur, N. H. and Keller, S. and Yasui, S. and Itoh, M. and Sakata, O. and Durst, Karsten and Webber, K. G. (2018):
Investigation of residual stress in lead-free BNT-based ceramic/ceramic composites.
In: Acta Materialia, Elsevier, pp. 432-441, 148, ISSN 1359-6454,
[Article]

Benzine, Omar and Bruns, Sebastian and Pan, Zhiwen and Durst, Karsten and Wondraczek, Lothar (2018):
Local Deformation of Glasses is Mediated by Rigidity Fluctuation on Nanometer Scale.
In: Advanced Science, Wiley, pp. 1-9, (1800916), ISSN 2198-3844,
DOI: 10.1002/advs.201800916,
[Article]

Yuan, Jia and Li, Duan and Johanns, Kurt E. and Fasel, Claudia and Durst, Karsten and Kleebe, Hans-Joachim and Shen, Zhijian and Riedel, Ralf and Ionescu, Emanuel (2017):
Preparation of dense SiHf(B)CN-based ceramic nanocomposites via rapid spark plasma sintering.
In: Journal of the European Ceramic Society, Elsevier Science Publishing, pp. 5157-5165, 37, (16), ISSN 09552219,
DOI: 10.1016/j.jeurceramsoc.2017.04.066,
[Online-Edition: https://doi.org/10.1016/j.jeurceramsoc.2017.04.066],
[Article]

Maier-Kiener, V. and Durst, Karsten (2017):
Advanced nanoindentation testing for studying strain-rate sensitivity and activation volume.
In: JOM, pp. 2246-2255, 69, (11), ISSN 1047-4838,
[Article]

Bruns, Sebastian and Johanns, Kurt E. and Rehman, Hamad ur and Pharr, G. M. and Durst, Karsten (2017):
Constitutive modeling of indentation cracking in fused silica.
In: Journal of the American Ceramic Society, pp. 1928-1940, 100, (5), ISSN 00027820,
[Article]

Javaid, Farhan and Durst, Karsten (2017):
Indentation size effect and dislocation structure evolution in (001) oriented SrTiO3 Berkovich indentations: HR-EBSD and etch-pit analysis.
In: Acta Materialia, pp. 1-10, (139), ISSN 1359-6454,
[Article]

Zehnder, C. and Bruns, Sebastian and Peltzer, J. N. and Durst, Karsten and Korte-Kerzel, S. and Möncke, D. (2017):
Influence of Cooling Rate on Cracking and Plastic Deformation during Impact and Indentation of Borosilicate Glasses.
In: Frontiers in Materials, p. 5, (4), ISSN 2296-8016,
[Article]

Maier-Kiener, V. and An, X. and Li, L. and Zhang, Z. and Pippan, R. and Durst, Karsten (2017):
Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu-AlX solid solutions.
In: Journal of Materials Research, Cambridge University Press, pp. 4583-4591, 32, (24), ISSN 0884-2914,
[Online-Edition: https://doi.org/10.1557/jmr.2017.320],
[Article]

Maier-Kiener, V. and An, X. and Li, L. and Zhang, Z. and Pippan, Reinhard and Durst, Karsten (2017):
Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu–AlX solid solutions.
In: Journal of Materials Research, pp. 4583-4591, 32, (24), ISSN 0884-2914,
[Article]

Rehman, Hamad ur and Durst, Karsten and Neumaier, S. and Satoh, A. and Reed, R. and Göken, M. (2017):
On the temperature dependent strengthening of nickel by transition metal solutes.
In: Acta Materialia, pp. 54-63, (137), ISSN 1359-6454,
[Article]

Ast, J. and Göken, M. and Durst, Karsten (2017):
Size-dependent fracture toughness of tungsten.
In: Acta Materialia, pp. 198-211, (138), ISSN 1359-6454,
[Article]

Ast, Johannes and Merle, Benoit and Durst, Karsten and Göken, Mathias (2016):
Fracture toughness evaluation of NiAl single crystals by microcantilevers—a new continuous J-integral method.
In: Journal of Materials Research, Cambridge University Press, New York, NY, USA, pp. 3786-3794, 31, (23), ISSN 0884-2914,
DOI: 10.1557/jmr.2016.393,
[Online-Edition: https://doi.org/10.1557/jmr.2016.393],
[Article]

Javaid, Farhan and Stukowski, Alexander and Durst, Karsten (2016):
3D Dislocation Structure Evolution in Strontium Titanate: Spherical Indentation Experiments and MD Simulations.
In: Journal of the American Ceramic Society, pp. 1134-1145, 100, (3), ISSN 00027820,
DOI: 10.1111/jace.14626,
[Online-Edition: https://doi.org/10.1111/jace.14626],
[Article]

Patterson, Eric A. and Major, Marton and Donner, Wolfgang and Durst, Karsten and Webber, Kyle G. and Rödel, Jürgen (2016):
Temperature-Dependent Deformation and Dislocation Density in SrTiO3 (001) Single Crystals.
In: Journal of the American Ceramic Society, The American Ceramic Society, pp. 3411-3420, 99, (10), ISSN 0002-7820,
[Article]

Durst, Karsten and Maier, Verena (2015):
Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals.
In: Current Opinion in Solid State and Materials Science, Elsevier Science Publishing, pp. 340-353, 19, (6), ISSN 13590286,
[Online-Edition: http://dx.doi.org/10.1016/j.cossms.2015.02.001],
[Article]

Klausmann, Amon and Morita, Koji and Johanns, Kurt E. and Fasel, Claudia and Durst, Karsten and Mera, Gabriela and Riedel, Ralf and Ionescu, Emanuel (2015):
Synthesis and high-temperature evolution of polysilylcarbodiimide-derived SiCN ceramic coatings.
In: Journal of the European Ceramic Society, Elsevier Science Publishing, pp. 3771-3780, 35, (14), ISSN 09552219,
[Online-Edition: http://dx.doi.org/10.1016/j.jeurceramsoc.2015.07.013],
[Article]

Maier, Verena and Schunk, Christopher and Göken, Mathias and Durst, Karsten (2015):
Microstructure-dependent deformation behaviour of bcc-metals – indentation size effect and strain rate sensitivity.
In: Philosophical Magazine, TAYLOR & FRANCIS LTD, England, pp. 1766-1779, 95, (16-18), ISSN 1478-6435,
[Online-Edition: http://dx.doi.org/10.1080/14786435.2014.982741],
[Article]

Rehman, Hamad ur and Durst, Karsten and Neumeier, Steffen and Parsa, Alireza B. and Kostka, Aleksander and Eggeler, Gunther and Göken, Mathias (2015):
Nanoindentation studies of the mechanical properties of the μ phase in a creep deformed Re containing nickel-based superalloy.
In: Materials Science and Engineering: A, ELSEVIER SCIENCE SA, Switzerland, pp. 202-208, 634, ISSN 09215093,
[Online-Edition: http://dx.doi.org/10.1016/j.msea.2015.03.045],
[Article]

Choi, In-Chul and Lee, Dong-Hyun and Ahn, Byungmin and Durst, Karsten and Kawasaki, Megumi and Langdon, Terence G. and Jang, Jae-il (2015):
Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion.
In: Scripta Materialia, PERGAMON-ELSEVIER SCIENCE LTD, pp. 44-47, 94, ISSN 13596462,
[Online-Edition: http://dx.doi.org/10.1016/j.scriptamat.2014.09.014],
[Article]

Blum, W. and Eisenlohr, P. and Prell, M. and Durst, Karsten (2015):
Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests.
In: KOVOVE MATERIALY-METALLIC MATERIALS, REDAKCIA KOVOVE MATERIALY, Slovakia, pp. 199-205, 53, (4), ISSN 0023-432X,
[Article]

Merle, Benoit and Maier, Verena and Durst, Karsten (2014):
Experimental and theoretical confirmation of the scaling exponent 2 in pyramidal load displacement data for depth sensing indentation.
In: Scanning, WILEY-VCH Verlag GmbH & Co. KGaA, pp. 526-529, 36, (5), ISSN 01610457,
[Online-Edition: http://dx.doi.org/10.1002/sca.21151],
[Article]

Haag, Fabian and Beitelschmidt, Denise and Eckert, Jürgen and Durst, Karsten (2014):
Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending – A nanoindentation and atomic force microscopy study.
In: Acta Materialia, Pergamon-Elsevier Science LTD, pp. 188-197, 70, ISSN 13596454,
[Online-Edition: http://dx.doi.org/10.1016/j.actamat.2014.01.053],
[Article]

Ast, J. and Przybilla, T. and Maier, V. and Durst, Karsten and Göken, M. (2014):
Microcantilever bending experiments in NiAl - Evaluation, size effects, and crack tip plasticity.
In: Journal of Materials Research, Cambridge University Press, pp. 2129-2140, 29, (18), ISSN 0884-2914,
[Online-Edition: https://doi.org/10.1557/jmr.2014.240],
[Article]

Schmid, Christoph and Hetzner, Harald and Tremmel, Stephan and Hilpert, Felix and Durst, Karsten (2014):
Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings.
In: Advanced Materials Research, Trans Tech Publications, Switzerland, pp. 14-21, 996, ISSN 1662-8985,
[Online-Edition: http://dx.doi.org/10.4028/www.scientific.net/AMR.996.14],
[Article]

Ahmed, Furqan and Krottenthaler, Markus and Schmid, Christoph and Durst, Karsten (2013):
Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy.
In: Surface and Coatings Technology, Elsevier Science Publishing, pp. 255-260, 237, ISSN 02578972,
[Online-Edition: http://dx.doi.org/10.1016/j.surfcoat.2013.07.025],
[Article]

Schmid, Christoph and Maier, V. and Schaufler, J. and Butz, B. and Spiecker, E. and Meier, S. and Göken, M. and Durst, Karsten (2013):
Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy.
In: Thin Solid Films, pp. 263-268, (528), ISSN 00406090,
DOI: 10.1016/j.tsf.2012.05.092,
[Article]

Depner-Miller, Udo and Ellermeier, Jörg and Scheerer, Herbert and Oechsner, Matthias and Bobzin, Kirsten and Bagcivan, Nazlim and Brögelmann, Tobias and Weiß, Raphael and Durst, Karsten and Schmid, Christoph (2013):
Influence of application technology on the erosion resistance of DLC coatings.
In: Surface & Coatings Technology, pp. 284-291, 237, ISSN 0257-8972,
[Article]

Webler, R. and Krottenthaler, M. and Neumeier, S. and Durst, Karsten and Göken, M. (2013):
Local fracture toughness and residual stress measurements on NiAl bond coats by micro cantilever and fib-based bar milling tests.
In: Proceedings of the International Symposium on Superalloys, Hobroken, pp. 93-102, DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84885926632&partnerID=40&md5=cfda36f793747faa202f38e4f0e327f9,
[Book Section]

Haynes, J. and Maier, V. and Durst, Karsten and Göken, M. (2013):
Strain-rate sensitivity (SRS) of nickel by instrumented indentation.
In: MEMS and Nanotechnology, New York, pp. 47-52, DOI: 10.1007/978-1-4614-4436-7_8,
[Online-Edition: https://link.springer.com/chapter/10.1007/978-1-4614-4436-7_...],
[Book Section]

Maier, V. and Merle, B. and Göken, M. and Durst, Karsten (2013):
An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures.
In: Journal of Materials Research, Cambridge University Press, pp. 1177-1188, 28, (9), ISSN 0884-2914,
[Online-Edition: https://doi.org/10.1557/jmr.2013.39],
[Article]

Krottenthaler, M. and Schmid, Christoph and Schaufler, J. and Durst, Karsten and Göken, M. (2013):
A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation.
In: Surface and Coatings Technology, Elsevier Science Publishing Company, pp. 247-252, (215), ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.08.095,
[Article]

Durst, Karsten and Rehman, H. U. and Merle, B. (2012):
Comment to paper "penetration depth and tip radius dependence on the correction factor in nanoindentation measurements" by J.M. Meza et al.
In: Journal of Materials Research, pp. 1205-1207, 27, (8), ISSN 0884-2914,
DOI: 10.1557/jmr.2012.41,
[Article]

Schaufler, J. and Schmid, Christoph and Durst, Karsten and Göken, M. (2012):
Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending.
In: Thin Solid Films, pp. 480-484, (522), ISSN 00406090,
DOI: 10.1016/j.tsf.2012.08.031,
[Article]

Meszaros, R. and Merle, B. and Wild, M. and Durst, Karsten and Göken, M. and Wondraczek, L. (2012):
Effect of thermal annealing on the mechanical properties of low-emissivity physical vapor deposited multilayer-coatings for architectural applications.
In: Thin Solid Films, pp. 7130-7135, 520, (24), ISSN 00406090,
DOI: 10.1016/j.tsf.2012.07.086,
[Article]

Merle, B. and Maier, V. and Göken, M. and Durst, Karsten (2012):
Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness.
In: Journal of Materials Research, pp. 214-221, 27, (1), ISSN 0884-2914,
DOI: 10.1557/jmr.2011.245,
[Article]

Hetzner, H. and Schaufler, J. and Tremmel, S. and Durst, Karsten and Wartzack, S. (2012):
Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests.
In: Surface and Coatings Technology, Elsevier Science Publishing Company, pp. 4864-4871, 206, ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.05.077,
[Article]

Hetzner, H. and Schaufler, J. and Tremmel, S. and Durst, Karsten and Wartzack, S. (2012):
Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests.
In: Surface and Coatings Technology, Elsevier Science Publishing Company, pp. 46-54, (212), ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.09.012,
[Article]

Iqbal, F. and Ast, J. and Göken, M. and Durst, Karsten (2012):
In situ micro-cantilever tests to study fracture properties of NiAl single crystals.
In: Acta Materialia, pp. 1193-1200, 60, (3), ISSN 13596454,
DOI: 10.1016/j.actamat.2011.10.060,
[Article]

Hetzner, H. and Schaufler, J. and Pejic, G. and Tremmel, S. and Durst, Karsten and Wartzack, S. (2012):
Investigation on the tribological-mechanical behaviour of amorphous carbon coatings by load-scanning tests.
In: Materialwissenschaft und Werkstofftechnik, pp. 226-233, 43, (3), ISSN 0933-5137,
DOI: 10.1002/mawe.201200846,
[Article]

Webler, R. and Krottenthaler, M. and Neumaier, S. and Durst, Karsten and Göken, M. (2012):
Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests.
In: Superalloys, Wiley, pp. 93-102, DOI: 10.1002/9781118516430.ch10,
[Article]

Rehman, H. U. and Ahmed, F. and Schmid, Christoph and Schaufler, J. and Durst, Karsten (2012):
Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and cohesive zone FEM modeling.
In: Surface and Coatings Technology, Elsevier Science Publishing Company, pp. 163-169, 207, ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.06.049,
[Article]

Schaufler, J. and Durst, Karsten and Haas, T. and Nolte, R. and Höppel, H. W. and Göken, M. (2012):
The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens.
In: International Journal of Fatigue, Elsevier, pp. 1-7, (37), ISSN 0142-1123,
DOI: 10.1016/j.ijfatigue.2011.09.008,
[Article]

Schaufler, J. and Yang, G. and Durst, Karsten and Spiecker, E. and Göken, M. (2011):
Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems.
In: Surface and Coatings Technology, pp. 3429-3433, 205, (11), ISSN 0257-8972,
DOI: 10.1016/j.surfcoat.2010.12.005,
[Article]

Zirkel, L. and Maier, V. and Durst, Karsten and Münstedt, H. (2011):
Compression moduli of foamed films of fluorinated ethylene propylene copolymers determined by nanoindentation.
In: Polymer Testing, pp. 286-293, 30, (3), DOI: 10.1016/j.polymertesting.2011.01.005,
[Article]

Franke, O. and Göken, M. and Meyers, M. A. and Durst, Karsten and Hodge, A. M. (2011):
Dynamic nanoindentation of articular porcine cartilage.
In: Materials Science and Engineering C, pp. 789-795, 31, (4), DOI: 10.1016/j.msec.2010.12.005,
[Article]

Lodes, M.A. and Hartmaier, A. and Göken, M. and Durst, Karsten (2011):
Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations.
In: Acta Materialia, pp. 4264-4273, 59, (11), ISSN 1359-6454,
DOI: 10.1016/j.actamat.2011.03.050,
[Article]

Böhner, A. and Maier, V. and Durst, Karsten and Höppel, H. W. and Göken, M. (2011):
Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials.
In: Advanced Engineering Materials, pp. 251-255, 13, (4), ISSN 1438-1656,
DOI: 10.1002/adem.201000270,
[Article]

Jennett, N.M. and Göken, M. and Durst, Karsten (2011):
Nano-mechanical testing in materials research and development.
In: Philosophical Magazine, Taylor & Francis, pp. 1035-1036, 91, (7-9), ISSN 1478-6435,
DOI: 10.1080/14786435.2011.561524,
[Article]

Maier, V. and Durst, Karsten and Mueller, J. and Backes, B. and Höppel, H. W. and Göken, M. (2011):
Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al.
In: Journal of Materials Research, pp. 1421-1430, 26, (11), ISSN 0884-2914,
DOI: 10.1557/jmr.2011.156,
[Article]

Ahmed, F. and Bayerlein, K. and Rosiwal, S.M. and Göken, M. and Durst, Karsten (2011):
Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling.
In: Acta Materialia, pp. 5422-5433, 59, (14), ISSN 1359-6454,
DOI: 10.1016/j.actamat.2011.05.015,
[Article]

Rausch, M. H. and Leipertz, A. and Fröba, A. P. and Jakobs, P.-J. and Durst, Karsten and Göken, M. (2011):
Studies on the origin of dropwise condensation of steam on ion implanted metallic surfaces.
In: Chemie-Ingenieur-Technik, pp. 545-551, 83, (4), DOI: 10.1002/cite.201000182,
[Article]

Ahmed, F. and Durst, Karsten and Rosiwal, S. and Fandrey, J. and Schaufler, J. and Göken, M. (2010):
In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy.
In: Surface and Coatings Technology, pp. 1022-1025, 204, (6-7), ISSN 0257-8972,
DOI: 10.1016/j.surfcoat.2009.04.030,
[Article]

Durst, Karsten and Hofmann, S. and Backes, B. and Mueller, J. and Göken, M. (2010):
Microimprinting of nanocrystalline metals - Influence of microstructure and work hardening.
In: Journal of Materials Processing Technology, Elsevier, pp. 1787-1793, 210, (13), ISSN 0924-0136,
DOI: 10.1016/j.jmatprotec.2010.06.010,
[Article]

Brandt, B. and Zollfrank, C. and Franke, O. and Fromme, J. and Göken, M. and Durst, Karsten (2010):
Micromechanics and ultrastructure of pyrolysed softwood cell walls.
In: Acta biomaterialia, pp. 4345-4351, 6, (11), ISSN 1878-7568,
DOI: 10.1016/j.actbio.2010.05.026,
[Article]

Nikulina, E. and Durst, Karsten and Göken, M. and Völkl, R. and Glatzel, U. (2010):
Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission electron microscopy and nanoindentation.
In: International Journal of Materials Research, Carl Hanser Verlag GmbH & Co. KG, pp. 585-588, 101, (5), ISSN 1862-5282,
DOI: 10.3139/146.110316,
[Article]

Kiener, D. and Durst, Karsten and Rester, M. and Minor, A. M. (2010):
Revealing deformation mechanisms with nanoindentation.
In: JOM : The Journal of the Minerals, Metals & Materials Society, Springer, pp. 14-23, 61, (3), ISSN 1047-4838,
DOI: 10.1007/s11837-009-0036-4,
[Article]

Jang, Y.-S. and Janko, M. and Maier, V. and Durst, Karsten and Travitzky, N. and Zollfrank, C. (2010):
SiC ceramic micropatterns from polycarbosilanes.
In: Journal of the European Ceramic Society, pp. 2773-2779, 30, (13), ISSN 0955-2219,
DOI: 10.1016/j.jeurceramsoc.2010.05.019,
[Article]

Brandt, B. and Lohbauer, U. and Göken, M. and Durst, Karsten (2010):
The influence of particle size on the mechanical properties of dental glass ionomer cements.
In: Advanced Engineering Materials, pp. B684-B689, 12, (12), ISSN 1438-1656,
DOI: 10.1002/adem.201080067,
[Article]

Das, J. and Pauly, S. and Boström, M. and Durst, Karsten and Göken, M. and Eckert, Jürgen (2009):
Designing bulk metallic glass and glass matrix composites in martensitic alloys.
In: Journal of Alloys and Compounds, Elsevier, pp. 97-101, 483, (1-2), ISSN 0925-8388,
DOI: 10.1016/j.jallcom.2008.08.139,
[Article]

Wang, Y. and Mayer, K.-H. and Scholz, A. and Berger, C. and Chilukuru, H. and Durst, Karsten and Blum, W. (2009):
Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650 °C.
In: Materials science and engineering A, Elsevier Science, pp. 180-184, 510-511 (C), ISSN 0921-5093,
DOI: 10.1016/j.msea.2008.04.116,
[Article]

Schaufler, J. and Durst, Karsten and Massler, O. and Göken, M. (2009):
In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading.
In: Thin Solid Films, pp. 1681-1685, 517, (5), ISSN 0040-6090,
DOI: 10.1016/j.tsf.2008.09.104,
[Article]

Franke, O. and Durst, Karsten and Göken, M. (2009):
Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples.
In: Journal of Materials Research, pp. 1127-1134, 24, (3), ISSN 0884-2914,
DOI: 10.1557/jmr.2009.0135,
[Article]

Backes, B. and Durst, Karsten and Amberger, D. and Göken, M. (2009):
Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy.
In: Metallurgical and Materials Transactions A, pp. 257-261, 40, (2), DOI: 10.1007/s11661-008-9720-1,
[Article]

Sadrabadi, P. and Durst, Karsten and Göken, M. and Blum, W. (2009):
Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits.
In: Philosophical Magazine Letters, pp. 391-398, 89, (6), DOI: 10.1080/09500830902984554,
[Article]

Blum, W. and Li, Y. J. and Durst, Karsten (2009):
Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures.
In: Acta Materialia, pp. 5207-5217, 57, (17), ISSN 1359-6454,
DOI: 10.1016/j.actamat.2009.07.030,
[Article]

Sadrabadi, P. and Durst, Karsten and Göken, M. (2009):
Study on the indentation size effect in CaF2: Dislocation structure and hardness.
In: Acta Materialia, pp. 1281-1289, 57, (4), ISSN 1359-6454,
DOI: 10.1016/j.actamat.2008.11.015,
[Article]

Brackes, B. and Huang, Y. Y. and Göken, M. and Durst, Karsten (2009):
The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism-based strain gradient plasticity theory.
In: Journal of Materials Research, pp. 1197-1207, 24, (3), ISSN 0884-2914,
DOI: 10.1557/jmr.2009.0123,
[Article]

Durst, Karsten and Göken, M. and Pharr, G. M. (2008):
Indentation size effect in spherical and pyramidal indentations.
In: Journal of Physics D: Applied Physics, IOP Publishing, pp. 074005, 41, (7), ISSN 0022-3727,
DOI: 10.1088/0022-3727/41/7/074005,
[Article]

Gelse, K. and Mühle, C. and Franke, O. and Park, J. and Jehle, M. and Durst, Karsten and Göken, M. and Henning, F. and Von Der Mark, K. and Schneider, H. (2008):
Cell-based resurfacing of large cartilage defects: Long-term evaluation of grafts from autologous transgene-activated periosteal cells in a porcine model of osteoarthritis.
In: Arthritis and Rheumatism, pp. 475-488, 58, (2), DOI: 10.1002/art.23124,
[Article]

Ndlovu, S. and Durst, Karsten and Hoeppel, H.W. and Göken, M. (2008):
Study on the local damage mechanisms in WC-Co hard metals during scratch testing.
In: Materials Research Society Symposium Proceedings, pp. 75-81, (1049), DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-55249096010&partnerID=40&md5=fb11b97123bb01635ff35d1ff0f09426,
[Article]

Wellmann, P. J. and Hens, P. and Sakwe, S. A. and Queren, D. and Müller, R. and Durst, Karsten and Göken, M. (2007):
Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth.
In: Materials Science Forum, Trans Tech Publications Switzerland, pp. 259-262, (556-557), ISSN 1662-9752,
DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-38449110238&partnerID=40&md5=9602e1f5bf698501469fd048645295df,
[Article]

Durst, Karsten and Franke, O. and Böhner, A. and Göken, M. (2007):
Indentation size effect in Ni-Fe solid solutions.
In: Acta Materialia, pp. 6825-6833, 55, (20), ISSN 1359-6454,
DOI: 10.1016/j.actamat.2007.08.044,
[Article]

Ndlovu, S. and Durst, Karsten and Göken, M. (2007):
Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing.
In: Wear, pp. 1602-1609, 263, (7-12), ISSN 0043-1648,
DOI: 10.1016/j.wear.2006.11.044,
[Article]

Franke, O. and Durst, Karsten and Maier, V. and Göken, M. and Birkholz, T. and Schneider, H. and Henning, F. and Gelse, K. (2007):
Mechanical properties of hyaline and repair cartilage studied by nanoindentation.
In: Acta biomaterialia, pp. 873-881, 3, (6), ISSN 1878-7568,
DOI: 10.1016/j.actbio.2007.04.005,
[Article]

Franke, O. and Durst, Karsten and Göken, M. (2007):
Microstructure and local mechanical properties of Pt-modified nickel aluminides on nickel-base superalloys after thermo-mechanical fatigue.
In: Materials science and engineering A, pp. 15-23, 467, (1-2), ISSN 0921-5093,
DOI: 10.1016/j.msea.2007.02.069,
[Article]

Backes, B. and Durst, Karsten and Göken, M. (2006):
Determination of plastic properties of polycrystalline metallic materials by nanoindentation: Experiments and finite element simulations.
In: Philosophical Magazine, Taylor & Francis, pp. 5541-5551, 86, (33-35), ISSN 1478-6435,
DOI: 10.1080/14786430600735468,
[Article]

Durst, Karsten and Backes, B. and Franke, O. and Göken, M. (2006):
Indentation size effect in metallic materials: Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations.
In: Acta Materialia, pp. 2547-2555, 54, (9), ISSN 1359-6454,
DOI: 10.1016/j.actamat.2006.01.036,
[Article]

Mueller, J. and Durst, Karsten and Amberger, D. and Göken, M. (2006):
Local investigations of the mechanical properties of ultrafine grained metals by nanoindentations.
In: Materials Science Forum, Trans Tech Publications Switzerland, pp. 31-36, (503-504), ISSN 1662-9752,
DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-33646140270&partnerID=40&md5=6d9f68fd92aef88a176c6a042b6e3721,
[Article]

Durst, Karsten and Backes, B. and Göken, M. (2005):
Determination of plastic properties of poly crystalline metallic materials by nanoindentation - Experiments and finite element simulations.
In: Materials Research Society Symposium Proceedings, pp. 311-316, 841, (11.4), DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-23844499422&partnerID=40&md5=2a13dcf9518bb0e928a08192766f4482,
[Article]

Durst, Karsten and Backes, B. and Göken, M. (2005):
Indentation size effect in metallic materials: Correcting for the size of the plastic zone.
In: Scripta Materialia, Elsevier Science Publishing, pp. 1093-1097, 52, (11), ISSN 1359-6462,
DOI: 10.1016/j.scriptamat.2005.02.009,
[Article]

Durst, Karsten and Göken, M. and Vehoff, H. (2004):
Finite element study for nanoindentation measurements on two-phase materials.
In: Journal of Materials Research, pp. 85-93, 19, (1), ISSN 0884-2914,
[Article]

Durst, Karsten and Göken, M. (2004):
Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys.
In: Materials science and engineering A, pp. 312-316, 387-389, (1-2 SPEC. ISS), ISSN 0921-5093,
DOI: 10.1016/j.msea.2004.03.079,
[Article]

Durst, Karsten and Franke, O. and Göken, M. (2004):
Nanoindentations as a local probe for the mechanical properties and alloying influences in nickel-base superalloys and aluminide coatings.
In: Proceedings of the International Symposium on Superalloys, pp. 467-476, [Article]

Schweitzer, E. and Durst, Karsten and Amberger, D. and Göken, M. (2004):
The mechanical properties in the vicinity of grain boundaries in ultrafine-grained and polycrystalline materials studied by nanoindentations.
In: Materials Research Society Symposium Proceedings, pp. 79-84, (819), [Article]

Durst, Karsten and Göken, M. and Pharr, G. M. (2002):
Finite element simulation of spherical indentation in the elastic-plastic transition.
In: Materials Research and Advanced Techniques, pp. 857-861, 93, (9), DOI: 10.3139/146.020857,
[Article]

Durst, Karsten and Göken, M. (2001):
Quantitative microstructural characterisation by atomic force microscopy and electron microscopy - A comparative study on the superalloy Waspaloy.
In: Praktische Metallographie, pp. 197-215, 38, (4), [Article]

This list was generated on Sat Jul 20 00:05:09 2019 CEST.