TU Darmstadt / ULB / TUbiblio

Blättern nach Person

Ebene hoch
Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Gruppiere nach: Keine Gruppierung | Typ des Eintrags | Publikationsjahr | Sprache
Springe zu: 2024 | 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2002 | 2001
Anzahl der Einträge: 132.

2024

Staab, Franziska ; Yang, Yangyiwei ; Foya, Eren ; Bruder, Enrico ; Zingsem, Benjamin ; Adabifiroozjaei, Esmaeil ; Skokov, Konstantin ; Farle, Michael ; Dunin-Borkowski, Rafal E. ; Molina-Luna, Leopoldo ; Gutfleisch, Oliver ; Xu, Bai-Xiang ; Durst, Karsten (2024)
Influence of amorphous phase on coercivity in SmCo5-Cu nanocomposites.
In: Scripta Materialia, 240
doi: 10.2139/ssrn.4462013
Artikel, Bibliographie

2023

Ding, Kuan ; Duarte, Maria J. ; Shen, Xiao ; Zhang, Siyuan ; Li, Jiejie ; Kostka, Aleksander ; Bruder, Enrico ; Li, Jianjun ; Song, Wenwen ; Durst, Karsten ; Best, James P. ; Fang, Xufei (2023)
Microstructural and micromechanical characterization of intergranular oxidation in Fe-15Cr alloy.
In: Corrosion Science, 225
doi: 10.1016/j.corsci.2023.111613
Artikel, Bibliographie

Liu, Jianin ; Yang, Ying ; Staab, Franziska ; Doñate-Buendia, Carlos ; Streubel, René ; Gökce, Bilal ; Maccari, Fernando ; Gabriel, Philipp ; Zingsem, Benjamin ; Spoddig, Detlef ; Durst, Karsten ; Farle, Michael ; Gutfleisch, Oliver ; Barcikowski, Stephan ; Skokov, Konstantin P. ; Ziefuß, Anna R. (2023)
Influence of Colloidal Additivation with Surfactant‐Free Laser‐Generated Metal Nanoparticles on the Microstructure of Suction‐Cast Nd–Fe–B Alloy.
In: Advanced Engineering Materials
doi: 10.1002/adem.202301054
Artikel, Bibliographie

Staab, Franziska ; Bruder, Enrico ; Schäfer, Lukas ; Skokov, Konstantin P. ; Koch, David ; Zingsem, Benjamin ; Adabifiroozjaei, Esmaeil ; Molina-Luna, Leopoldo ; Gutfleisch, Oliver ; Durst, Karsten (2023)
Hard magnetic SmCo5-Cu nanocomposites produced by severe plastic deformation.
In: Acta Materialia, 246
doi: 10.1016/j.actamat.2023.118709
Artikel, Bibliographie

Kang, Sangjun ; Wang, Di ; Caron, Arnaud ; Minnert, Christian ; Durst, Karsten ; Kübel, Christian ; Mu, Xiaoke (2023)
Direct Observation of Quadrupolar Strain Fields forming a Shear Band in Metallic Glasses.
In: Advanced Materials, 2023, 35 (25)
doi: 10.26083/tuprints-00024301
Artikel, Zweitveröffentlichung, Verlagsversion

Porz, Lukas ; Klomp, Arne Jan ; Fang, Xufei ; Li, Ning ; Yildirim, Can ; Detlefs, Carsten ; Bruder, Enrico ; Höfling, Marion ; Rheinheimer, Wolfgang ; Patterson, Eric A. ; Gao, Peng ; Durst, Karsten ; Nakamura, Atsutomo ; Albe, Karsten ; Simons, Hugh ; Rödel, Jürgen (2023)
Dislocation-toughened ceramics.
In: Materials Horizons, 2021, 8 (5)
doi: 10.26083/tuprints-00023191
Artikel, Zweitveröffentlichung, Verlagsversion

Takhsha Ghahfarokhi, M. ; Casoli, F. ; Minnert, C. ; Bruns, Sebastian ; Bruder, Enrico ; Cabassi, R. ; Durst, Karsten ; Gutfleisch, Oliver ; Albertini, F. (2023)
Effects of nanoindents on the martensitic transformation of Ni-Mn-Ga shape-memory Heusler films: A study by high-resolution imaging as a function of temperature.
In: Acta Materialia, 245
doi: 10.1016/j.actamat.2022.118603
Artikel, Bibliographie

Weissitsch, Lukas ; Staab, Franziska ; Durst, Karsten ; Bachmaier, Andrea (2023)
Magnetic materials via high-pressure torsion deformation of powders.
In: Materials Transactions
doi: 10.2320/matertrans.MT-MF2022026
Artikel, Bibliographie

Sos, Marcel ; Meyer, Guillaume ; Durst, Karsten ; Mittelstedt, Christian ; Bruder, Enrico (2023)
Microstructure and mechanical properties of additively manufactured AlSi10Mg lattice structures from single contour exposure.
In: Materials & Design, 227
doi: 10.1016/j.matdes.2023.111796
Artikel, Bibliographie

Sos, Marcel ; Meyer, Guillaume ; Durst, Karsten ; Mittelstedt, Christian ; Bruder, Enrico (2023)
Microstructure and mechanical properties of additively manufactured AlSi10Mg lattice structures from single contour exposure.
In: Materials & Design, 2023, 227
doi: 10.26083/tuprints-00023401
Artikel, Zweitveröffentlichung, Verlagsversion

Fang, Xufei ; Bishara, Hanna ; Ding, Kuan ; Tsybenko, Hanna ; Porz, Lukas ; Höfling, Marion ; Bruder, Enrico ; Li, Yingwei ; Dehm, Gerhard ; Durst, Karsten (2023)
Nanoindentation pop‐in in oxides at room temperature: Dislocation activation or crack formation?
In: Journal of the American Ceramic Society, 2021, 104 (9)
doi: 10.26083/tuprints-00023199
Artikel, Zweitveröffentlichung, Verlagsversion

Braun, Paul ; Grützmacher, Philipp ; Frohnapfel, Leonie ; Mücklich, Frank ; Durst, Karsten (2023)
Nanoscale patterning of metallic surfaces with laser patterned tools using a nanoimprinting approach.
In: Applied Surface Science, 613
doi: 10.1016/j.apsusc.2022.155786
Artikel, Bibliographie

Bruns, Sebastian ; Minnert, Christian ; Pethö, Laszlo ; Michler, Johann ; Durst, Karsten (2023)
Room Temperature Viscous Flow of Amorphous Silica Induced by Electron Beam Irradiation.
In: Advanced Science
doi: 10.1002/advs.202205237
Artikel, Bibliographie

Stich, Stephan ; Ding, Kuan ; Muhammad, Qaisar Khushi ; Porz, Lukas ; Minnert, Christian ; Rheinheimer, Wolfgang ; Durst, Karsten ; Rödel, Jürgen ; Frömling, Till ; Fang, Xufei (2023)
Room‐temperature dislocation plasticity in SrTiO₃ tuned by defect chemistry.
In: Journal of the American Ceramic Society, 2021, 105 (2)
doi: 10.26083/tuprints-00023235
Artikel, Zweitveröffentlichung, Verlagsversion

2022

Okafor, Chukwudalu ; Ding, Kuan ; Zhou, Xiandong ; Durst, Karsten ; Rödel, Jürgen ; Fang, Xufei (2022)
Mechanical tailoring of dislocation densities in SrTiO3 at room temperature.
In: Journal of the American Ceramic Society, 105 (4)
doi: 10.1111/jace.18277
Artikel, Bibliographie

Ding, Kuan ; Bruder, Enrico ; Dietz, Christian ; Durst, Karsten ; Fang, Xufei (2022)
Nanoindentation study of the oxide scale on FeCr alloy by high-pressure torsion.
In: Corrosion Science, 194
doi: 10.1016/j.corsci.2021.109951
Artikel, Bibliographie

Ding, Kuan ; Bruder, Enrico ; Dietz, Christian ; Durst, Karsten ; Fang, Xufei (2022)
Nanoindentation study of the oxide scale on FeCr alloy by high-pressure torsion.
In: Corrosion Science, 194
doi: 10.1016/j.corsci.2021.109951
Artikel, Bibliographie

Fromm, Timo ; Bruns, Sebastian ; Müller, Marie-Christin ; Fink, Alexander ; Borchardt, Rudolf ; Rosiwal, Stefan M. ; Durst, Karsten (2022)
Bioinspired damage tolerant diamond-metal laminates by alternating CVD and PVD processes.
In: Materials & Design, 213
doi: 10.1016/j.matdes.2021.110315
Artikel, Bibliographie

Shkodich, Natalia ; Staab, Franziska ; Spasova, Marina ; Kuskov, Kirill V. ; Durst, Karsten ; Farle, Michael (2022)
Effect of High-Pressure Torsion on the Microstructure and Magnetic Properties of Nanocrystalline CoCrFeNiGax (x = 0.5, 1.0) High Entropy Alloys.
In: Materials, 15 (20)
doi: 10.3390/ma15207214
Artikel, Bibliographie

Okafor, Chukwudalu ; Ding, Kuan ; Zhou, Xiandong ; Durst, Karsten ; Rödel, Jürgen ; Fang, Xufei (2022)
Mechanical tailoring of dislocation densities in SrTiO₃ at room temperature.
In: Journal of the American Ceramic Society, 2022, 105 (4)
doi: 10.26083/tuprints-00020995
Artikel, Zweitveröffentlichung, Verlagsversion

Keil, Tom ; Minnert, Christian ; Bruder, Enrico ; Durst, Karsten (2022)
Solid solution hardening effects on structure evolution and mechanical properties of nanostructured binary and high entropy alloys after high pressure torsion.
In: IOP Conference Series: Materials Science and Engineering, 1249
doi: 10.1088/1757-899X/1249/1/012003
Artikel, Bibliographie

2021

Stich, Stephan ; Ding, Kuan ; Muhammad, Qaisar Khushi ; Porz, Lukas ; Minnert, Christian ; Rheinheimer, Wolfgang ; Durst, Karsten ; Rödel, Jürgen ; Frömling, Till ; Fang, Xufei (2021)
Room-temperature dislocation plasticity in SrTiO3 tuned by defect chemistry.
In: Journal of the American Ceramic Society
doi: 10.1111/jace.18118
Artikel, Bibliographie

Höfling, Marion ; Zhou, Xiandong ; Riemer, Lukas M. ; Bruder, Enrico ; Liu, Binzhi ; Zhou, Lin ; Groszewicz, Pedro B. ; Zhuo, Fangping ; Xu, Bai-Xiang ; Durst, Karsten ; Tan, Xiaoli ; Damjanovic, Dragan ; Koruza, Jurij ; Rödel, Jürgen (2021)
Control of polarization in bulk ferroelectrics by mechanical dislocation imprint.
In: Science (New York, N.Y.), 372 (6545)
doi: 10.1126/science.abe3810
Artikel, Bibliographie

Keil, Tom ; Utt, Daniel ; Bruder, Enrico ; Stukowski, Alexander ; Albe, Karsten ; Durst, Karsten (2021)
Solid solution hardening in CrMnFeCoNi-based high entropy alloy systems studied by a combinatorial approach.
In: Journal of Materials Research, 2021
doi: 10.1557/s43578-021-00205-6
Artikel, Bibliographie

Zhu, Tingting ; Ding, Kuan ; Oshima, Yu ; Amiri, Anahid ; Bruder, Enrico ; Stark, Robert W. ; Durst, Karsten ; Matsunaga, Katsuyuki ; Nakamura, Atsutomo ; Fang, Xufei (2021)
Switching the fracture toughness of single-crystal ZnS using light irradiation.
In: Applied Physics Letters, 118 (15)
doi: 10.1063/5.0047306
Artikel, Bibliographie

Fang, Xufei ; Bishara, Hanna ; Ding, Kuan ; Tsybenko, Hanna ; Porz, Lukas ; Höfling, Marion ; Bruder, Enrico ; Li, Yingwei ; Dehm, Gerhard ; Durst, Karsten (2021)
Nanoindentation pop-in in oxides at room temperature: Dislocation activation or crack formation?
In: Journal of the American Ceramic Society, 104 (9)
doi: 10.1111/jace.17806
Artikel, Bibliographie

Porz, Lukas ; Klomp, Arne J. ; Fang, Xufei ; Li, Ning ; Yildirim, Can ; Detlefs, Carsten ; Bruder, Enrico ; Höfling, Marion ; Rheinheimer, Wolfgang ; Patterson, Eric A. ; Gao, Peng ; Durst, Karsten ; Nakamura, Atsutomo ; Albe, Karsten ; Simons, Hugh ; Rödel, Jürgen (2021)
Dislocation-toughened ceramics.
In: Materials Horizons, 2021
doi: 10.1039/D0MH02033H
Artikel, Bibliographie

Fang, Xufei ; Ding, Kuan ; Minnert, Christian ; Nakamura, Atsutomo ; Durst, Karsten (2021)
Dislocation-based crack initiation and propagation in single-crystal SrTiO3.
In: Journal of Materials Science, 2021 (56)
doi: 10.1007/s10853-020-05587-2
Artikel, Bibliographie

Bruns, Sebastian ; Uesbeck, Tobias ; Weil, Dominik ; Möncke, Doris ; van Wüllen, Leo ; Durst, Karsten ; de Ligny, Dominique (2021)
Influence of Al2O3 Addition on Structure and Mechanical Properties of Borosilicate Glasses.
In: Frontiers in Materials, 2020, 7
doi: 10.26083/tuprints-00019235
Artikel, Zweitveröffentlichung, Verlagsversion

Xuan, Yang ; Fromm, Timo ; Bruns, Sebastian ; Borchardt, Rudolf ; Durst, Karsten ; Rosiwal, Stefan M. (2021)
A simple way to make tough diamond/metal laminates.
In: Journal of the European Ceramic Society, 41 (10)
doi: 10.1016/j.jeurceramsoc.2021.03.055
Artikel, Bibliographie

2020

Fang, Xufei ; Ding, Kuan ; Janocha, Stephan ; Minnert, Christian ; Rheinheimer, Wolfgang ; Frömling, Till ; Durst, Karsten ; Nakamura, Atsutomo ; Rödel, Jürgen (2020)
Nanoscale to microscale reversal in room-temperature plasticity in SrTiO 3 by tuning defect concentration.
In: Scripta Materialia, (188)
doi: 10.1016/j.scriptamat.2020.07.033
Artikel, Bibliographie

Bruns, Sebastian ; Petho, Laszlo ; Minnert, Christian ; Michler, Johann ; Durst, Karsten (2020)
Fracture toughness determination of fused silica by cube corner indentation cracking and pillar splitting.
In: Materials & Design, 2020, 186
doi: 10.25534/tuprints-00011386
Artikel, Zweitveröffentlichung

Bruns, Sebastian ; Uesbeck, Tobias ; Fuhrmann, Sindy ; Tarragó Aymerich, Mariona ; Wondraczek, Lothar ; Ligny, Dominique ; Durst, Karsten (2020)
Indentation densification of fused silica assessed by raman spectroscopy and constitutive finite element analysis.
In: Journal of the American Ceramic Society, 103 (5)
doi: 10.1111/jace.17024
Artikel, Bibliographie

Fuhrmann, Sindy ; Macedo, Guilherme N. B. M. de ; Limbach, René ; Krywka, Christina ; Bruns, Sebastian ; Durst, Karsten ; Wondraczek, Lothar (2020)
Indentation-Induced Structural Changes in Vitreous Silica Probed by in-situ Small-Angle X-Ray Scattering.
In: Frontiers in Materials, 7
doi: 10.3389/fmats.2020.00173
Artikel, Bibliographie

Minnert, Christian ; Oliver, Warren C. ; Durst, Karsten (2020)
New ultra-high temperature nanoindentation system for operating at up to 1100 °C.
In: Materials & Design, 2020, 192
doi: 10.25534/tuprints-00013342
Artikel, Zweitveröffentlichung

Grammes, Thilo ; Limbach, René ; Bruns, Sebastian ; Wüllen, Leo van ; Ligny, Dominique de ; Kamitsos, Efstratios I. ; Durst, Karsten ; Wondraczek, Lothar ; Brauer, Delia S. (2020)
Tailoring the Mechanical Properties of Metaluminous Aluminosilicate Glasses by Phosphate Incorporation.
In: Frontiers in Materials, 7
doi: 10.3389/fmats.2020.00115
Artikel, Bibliographie

2019

Keil, Tom ; Bruder, Enrico ; Durst, Karsten (2019)
Exploring the compositional parameter space of high-entropy alloys using a diffusion couple approach.
In: Materials & Design, 176
doi: 10.1016/j.matdes.2019.107816
Artikel, Bibliographie

2018

Minnert, Christiane ; Kuhnt, M. ; Bruns, S. ; Marshal, A. ; Pradeep, K. G. ; Marsilius, Mie ; Bruder, Enrico ; Durst, Karsten (2018)
Study on the embrittlement of flash annealed Fe85. 2B9. 5P4Cu0. 8Si0. 5 metallic glass ribbons.
In: Materials & Design, 156
doi: 10.1016/j.matdes.2018.06.055
Artikel, Bibliographie

Javaid, Farhan ; Durst, Karsten (2018)
Stress-driven grain boundary movement during nanoindentation in tungsten at room temperature.
In: Materialia, (1)
Artikel, Bibliographie

Javaid, Farhan ; Xu, Y. ; Bruder, Enrico ; Durst, Karsten (2018)
Indentation size effectin tungsten: Quantification of geometrically necessary dislocations underneath the indentations using HR-EBSD.
In: Materials Characterization, (142)
doi: 10.1016/j.matchar.2018.05.016
Artikel, Bibliographie

Ndlovu, S. N. ; Durst, Karsten ; Göken, M.
Hrsg.: Fischer, Alfons ; Bobzin, Kirsten (2018)
Deformation of WC-Co Hardmetals During Scratch Testing.
In: Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection
doi: 10.1002/9783527628513.ch20
Buchkapitel, Bibliographie

Minnert, Christian ; Kuhnt, Markus ; Bruns, Sebastian ; Marshal, Amalraj ; Pradeep, Konda Gokuldoss ; Marsilius, Mie ; Bruder, Enrico ; Durst, Karsten (2018)
Study on the embrittlement of flash annealed Fe85.2B9.5P4Cu0.8Si0.5 metallic glass ribbons.
In: Materials and design, 156
doi: 10.1016/j.matdes.2018.06.055
Artikel, Bibliographie

Benzine, Omar ; Bruns, Sebastian ; Pan, Z. ; Durst, Karsten ; Wondraczek, L. (2018)
Local deformation of glasses is mediated by rigidity fluctuation and granularity.
In: ChemRxiv : the Preprint Server for Chemistry
Artikel, Bibliographie

Javaid, Farhan ; Johanns, K. E. ; Patterson, Eric A. ; Durst, Karsten (2018)
Temperature dependence of indentation size effect, dislocation pile‐ups, and lattice friction in (001) strontium titanate.
In: Journal of the American Ceramic Society, 101 (1)
Artikel, Bibliographie

Braak, R. ; May, U. ; Onuseit, L. ; Repphun, G. ; Guenther, M. ; Schmid, Christoph ; Durst, Karsten (2018)
Accelerated thermal degradation of DLC-coatings via growth defects.
In: Surface and Coatings Technology, 349
doi: 10.1016/j.surfcoat.2018.05.063
Artikel, Bibliographie

Bruder, Enrico ; Braun, Paul ; Rehman, H. U. ; Marceau, R. K. W. ; Taylor, A. S. ; Pippan, R. ; Durst, Karsten (2018)
Influence of solute effects on the saturation grain size and rate sensitivity in Cu-X alloys.
In: Scripta Materialia, 144
Artikel, Bibliographie

Ayrikyan, A. ; Prach, Olena ; Khansur, N. H. ; Keller, S. ; Yasui, S. ; Itoh, M. ; Sakata, O. ; Durst, Karsten ; Webber, K. G. (2018)
Investigation of residual stress in lead-free BNT-based ceramic/ceramic composites.
In: Acta Materialia, 148
Artikel, Bibliographie

Benzine, Omar ; Bruns, Sebastian ; Pan, Zhiwen ; Durst, Karsten ; Wondraczek, Lothar (2018)
Local Deformation of Glasses is Mediated by Rigidity Fluctuation on Nanometer Scale.
In: Advanced Science, (1800916)
doi: 10.1002/advs.201800916
Artikel, Bibliographie

2017

Yuan, Jia ; Li, Duan ; Johanns, Kurt E. ; Fasel, Claudia ; Durst, Karsten ; Kleebe, Hans-Joachim ; Shen, Zhijian ; Riedel, Ralf ; Ionescu, Emanuel (2017)
Preparation of dense SiHf(B)CN-based ceramic nanocomposites via rapid spark plasma sintering.
In: Journal of the European Ceramic Society, 37 (16)
doi: 10.1016/j.jeurceramsoc.2017.04.066
Artikel, Bibliographie

Maier-Kiener, V. ; Durst, Karsten (2017)
Advanced nanoindentation testing for studying strain-rate sensitivity and activation volume.
In: JOM, 69 (11)
Artikel, Bibliographie

Bruns, Sebastian ; Johanns, Kurt E. ; Rehman, Hamad ur ; Pharr, G. M. ; Durst, Karsten (2017)
Constitutive modeling of indentation cracking in fused silica.
In: Journal of the American Ceramic Society, 100 (5)
Artikel, Bibliographie

Javaid, Farhan ; Durst, Karsten (2017)
Indentation size effect and dislocation structure evolution in (001) oriented SrTiO3 Berkovich indentations: HR-EBSD and etch-pit analysis.
In: Acta Materialia, (139)
Artikel, Bibliographie

Zehnder, C. ; Bruns, Sebastian ; Peltzer, J. N. ; Durst, Karsten ; Korte-Kerzel, S. ; Möncke, D. (2017)
Influence of Cooling Rate on Cracking and Plastic Deformation during Impact and Indentation of Borosilicate Glasses.
In: Frontiers in Materials, (4)
Artikel, Bibliographie

Maier-Kiener, V. ; An, X. ; Li, L. ; Zhang, Z. ; Pippan, R. ; Durst, Karsten (2017)
Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu-AlX solid solutions.
In: Journal of Materials Research, 32 (24)
Artikel, Bibliographie

Maier-Kiener, V. ; An, X. ; Li, L. ; Zhang, Z. ; Pippan, Reinhard ; Durst, Karsten (2017)
Influence of solid solution strengthening on the local mechanical properties of single crystal and ultrafine-grained binary Cu–AlX solid solutions.
In: Journal of Materials Research, 32 (24)
Artikel, Bibliographie

Rehman, Hamad ur ; Durst, Karsten ; Neumaier, S. ; Satoh, A. ; Reed, R. ; Göken, M. (2017)
On the temperature dependent strengthening of nickel by transition metal solutes.
In: Acta Materialia, (137)
Artikel, Bibliographie

Ast, J. ; Göken, M. ; Durst, Karsten (2017)
Size-dependent fracture toughness of tungsten.
In: Acta Materialia, (138)
Artikel, Bibliographie

2016

Ast, Johannes ; Merle, Benoit ; Durst, Karsten ; Göken, Mathias (2016)
Fracture toughness evaluation of NiAl single crystals by microcantilevers—a new continuous J-integral method.
In: Journal of Materials Research, 31 (23)
doi: 10.1557/jmr.2016.393
Artikel, Bibliographie

Javaid, Farhan ; Stukowski, Alexander ; Durst, Karsten (2016)
3D Dislocation Structure Evolution in Strontium Titanate: Spherical Indentation Experiments and MD Simulations.
In: Journal of the American Ceramic Society, 100 (3)
doi: 10.1111/jace.14626
Artikel, Bibliographie

Patterson, Eric A. ; Major, Marton ; Donner, Wolfgang ; Durst, Karsten ; Webber, Kyle G. ; Rödel, Jürgen (2016)
Temperature-Dependent Deformation and Dislocation Density in SrTiO3 (001) Single Crystals.
In: Journal of the American Ceramic Society, 99 (10)
doi: 10.1111/jace.14352
Artikel, Bibliographie

2015

Durst, Karsten ; Maier, Verena (2015)
Dynamic nanoindentation testing for studying thermally activated processes from single to nanocrystalline metals.
In: Current Opinion in Solid State and Materials Science, 19 (6)
doi: 10.1016/j.cossms.2015.02.001
Artikel, Bibliographie

Klausmann, Amon ; Morita, Koji ; Johanns, Kurt E. ; Fasel, Claudia ; Durst, Karsten ; Mera, Gabriela ; Riedel, Ralf ; Ionescu, Emanuel (2015)
Synthesis and high-temperature evolution of polysilylcarbodiimide-derived SiCN ceramic coatings.
In: Journal of the European Ceramic Society, 35 (14)
doi: 10.1016/j.jeurceramsoc.2015.07.013
Artikel, Bibliographie

Maier, Verena ; Schunk, Christopher ; Göken, Mathias ; Durst, Karsten (2015)
Microstructure-dependent deformation behaviour of bcc-metals – indentation size effect and strain rate sensitivity.
In: Philosophical Magazine, 95 (16-18)
doi: 10.1080/14786435.2014.982741
Artikel, Bibliographie

Rehman, Hamad ur ; Durst, Karsten ; Neumeier, Steffen ; Parsa, Alireza B. ; Kostka, Aleksander ; Eggeler, Gunther ; Göken, Mathias (2015)
Nanoindentation studies of the mechanical properties of the μ phase in a creep deformed Re containing nickel-based superalloy.
In: Materials Science and Engineering: A, 634
doi: 10.1016/j.msea.2015.03.045
Artikel, Bibliographie

Choi, In-Chul ; Lee, Dong-Hyun ; Ahn, Byungmin ; Durst, Karsten ; Kawasaki, Megumi ; Langdon, Terence G. ; Jang, Jae-il (2015)
Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion.
In: Scripta Materialia, 94
doi: 10.1016/j.scriptamat.2014.09.014
Artikel, Bibliographie

Blum, W. ; Eisenlohr, P. ; Prell, M. ; Durst, Karsten (2015)
Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests.
In: KOVOVE MATERIALY-METALLIC MATERIALS, 53 (4)
Artikel, Bibliographie

2014

Merle, Benoit ; Maier, Verena ; Durst, Karsten (2014)
Experimental and theoretical confirmation of the scaling exponent 2 in pyramidal load displacement data for depth sensing indentation.
In: Scanning, 36 (5)
doi: 10.1002/sca.21151
Artikel, Bibliographie

Haag, Fabian ; Beitelschmidt, Denise ; Eckert, Jürgen ; Durst, Karsten (2014)
Influences of residual stresses on the serrated flow in bulk metallic glass under elastostatic four-point bending – A nanoindentation and atomic force microscopy study.
In: Acta Materialia, 70
doi: 10.1016/j.actamat.2014.01.053
Artikel, Bibliographie

Ast, J. ; Przybilla, T. ; Maier, V. ; Durst, Karsten ; Göken, M. (2014)
Microcantilever bending experiments in NiAl - Evaluation, size effects, and crack tip plasticity.
In: Journal of Materials Research, 29 (18)
Artikel, Bibliographie

Schmid, Christoph ; Hetzner, Harald ; Tremmel, Stephan ; Hilpert, Felix ; Durst, Karsten (2014)
Tailored Mechanical Properties and Residual Stresses of a-C:H:W Coatings.
In: Advanced Materials Research, 996
doi: 10.4028/www.scientific.net/AMR.996.14
Artikel, Bibliographie

2013

Ahmed, Furqan ; Krottenthaler, Markus ; Schmid, Christoph ; Durst, Karsten (2013)
Assessment of stress relaxation experiments on diamond coatings analyzed by digital image correlation and micro-Raman spectroscopy.
In: Surface and Coatings Technology, 237
doi: 10.1016/j.surfcoat.2013.07.025
Artikel, Bibliographie

Schmid, Christoph ; Maier, V. ; Schaufler, J. ; Butz, B. ; Spiecker, E. ; Meier, S. ; Göken, M. ; Durst, Karsten (2013)
Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy.
In: Thin Solid Films, (528)
doi: 10.1016/j.tsf.2012.05.092
Artikel, Bibliographie

Depner-Miller, Udo ; Ellermeier, Jörg ; Scheerer, Herbert ; Oechsner, Matthias ; Bobzin, Kirsten ; Bagcivan, Nazlim ; Brögelmann, Tobias ; Weiß, Raphael ; Durst, Karsten ; Schmid, Christoph (2013)
Influence of application technology on the erosion resistance of DLC coatings.
In: Surface & Coatings Technology, 237
Artikel, Bibliographie

Webler, Ralf ; Krottenthaler, Markus ; Neumeier, Steffen ; Durst, Karsten ; Göken, Mathias (2013)
Local fracture toughness and residual stress measurements on NiAl bond coats by micro cantilever and fib-based bar milling tests.
In: Proceedings of the International Symposium on Superalloys
doi: 10.1002/9781118516430.ch10
Buchkapitel, Bibliographie

Haynes, J. ; Maier, V. ; Durst, Karsten ; Göken, M. (2013)
Strain-rate sensitivity (SRS) of nickel by instrumented indentation.
In: MEMS and Nanotechnology
doi: 10.1007/978-1-4614-4436-7_8
Buchkapitel, Bibliographie

Maier, V. ; Merle, B. ; Göken, M. ; Durst, Karsten (2013)
An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures.
In: Journal of Materials Research, 28 (9)
Artikel, Bibliographie

Krottenthaler, M. ; Schmid, Christoph ; Schaufler, J. ; Durst, Karsten ; Göken, M. (2013)
A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation.
In: Surface and Coatings Technology, (215)
doi: 10.1016/j.surfcoat.2012.08.095
Artikel, Bibliographie

2012

Durst, Karsten ; Rehman, H. U. ; Merle, B. (2012)
Comment to paper "penetration depth and tip radius dependence on the correction factor in nanoindentation measurements" by J.M. Meza et al.
In: Journal of Materials Research, 27 (8)
doi: 10.1557/jmr.2012.41
Artikel, Bibliographie

Schaufler, J. ; Schmid, Christoph ; Durst, Karsten ; Göken, M. (2012)
Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending.
In: Thin Solid Films, (522)
doi: 10.1016/j.tsf.2012.08.031
Artikel, Bibliographie

Meszaros, R. ; Merle, B. ; Wild, M. ; Durst, Karsten ; Göken, M. ; Wondraczek, L. (2012)
Effect of thermal annealing on the mechanical properties of low-emissivity physical vapor deposited multilayer-coatings for architectural applications.
In: Thin Solid Films, 520 (24)
doi: 10.1016/j.tsf.2012.07.086
Artikel, Bibliographie

Merle, B. ; Maier, V. ; Göken, M. ; Durst, Karsten (2012)
Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness.
In: Journal of Materials Research, 27 (1)
doi: 10.1557/jmr.2011.245
Artikel, Bibliographie

Hetzner, H. ; Schaufler, J. ; Tremmel, S. ; Durst, Karsten ; Wartzack, S. (2012)
Failure mechanisms of a hydrogenated amorphous carbon coating in load-scanning tests.
In: Surface and Coatings Technology, 206
doi: 10.1016/j.surfcoat.2012.05.077
Artikel, Bibliographie

Hetzner, H. ; Schaufler, J. ; Tremmel, S. ; Durst, Karsten ; Wartzack, S. (2012)
Failure mechanisms of a tungsten-modified hydrogenated amorphous carbon coating in load-scanning tests.
In: Surface and Coatings Technology, (212)
doi: 10.1016/j.surfcoat.2012.09.012
Artikel, Bibliographie

Iqbal, F. ; Ast, J. ; Göken, M. ; Durst, Karsten (2012)
In situ micro-cantilever tests to study fracture properties of NiAl single crystals.
In: Acta Materialia, 60 (3)
doi: 10.1016/j.actamat.2011.10.060
Artikel, Bibliographie

Hetzner, H. ; Schaufler, J. ; Pejic, G. ; Tremmel, S. ; Durst, Karsten ; Wartzack, S. (2012)
Investigation on the tribological-mechanical behaviour of amorphous carbon coatings by load-scanning tests.
In: Materialwissenschaft und Werkstofftechnik, 43 (3)
doi: 10.1002/mawe.201200846
Artikel, Bibliographie

Webler, R. ; Krottenthaler, M. ; Neumaier, S. ; Durst, Karsten ; Göken, M. (2012)
Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests.
In: Superalloys
doi: 10.1002/9781118516430.ch10
Artikel, Bibliographie

Rehman, H. U. ; Ahmed, F. ; Schmid, Christoph ; Schaufler, J. ; Durst, Karsten (2012)
Study on the deformation mechanics of hard brittle coatings on ductile substrates using in-situ tensile testing and cohesive zone FEM modeling.
In: Surface and Coatings Technology, 207
doi: 10.1016/j.surfcoat.2012.06.049
Artikel, Bibliographie

Schaufler, J. ; Durst, Karsten ; Haas, T. ; Nolte, R. ; Höppel, H. W. ; Göken, M. (2012)
The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens.
In: International Journal of Fatigue, (37)
doi: 10.1016/j.ijfatigue.2011.09.008
Artikel, Bibliographie

2011

Schaufler, J. ; Yang, G. ; Durst, Karsten ; Spiecker, E. ; Göken, M. (2011)
Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems.
In: Surface and Coatings Technology, 205 (11)
doi: 10.1016/j.surfcoat.2010.12.005
Artikel, Bibliographie

Zirkel, L. ; Maier, V. ; Durst, Karsten ; Münstedt, H. (2011)
Compression moduli of foamed films of fluorinated ethylene propylene copolymers determined by nanoindentation.
In: Polymer Testing, 30 (3)
doi: 10.1016/j.polymertesting.2011.01.005
Artikel, Bibliographie

Franke, O. ; Göken, M. ; Meyers, M. A. ; Durst, Karsten ; Hodge, A. M. (2011)
Dynamic nanoindentation of articular porcine cartilage.
In: Materials Science and Engineering C, 31 (4)
doi: 10.1016/j.msec.2010.12.005
Artikel, Bibliographie

Lodes, M.A. ; Hartmaier, A. ; Göken, M. ; Durst, Karsten (2011)
Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations.
In: Acta Materialia, 59 (11)
doi: 10.1016/j.actamat.2011.03.050
Artikel, Bibliographie

Böhner, A. ; Maier, V. ; Durst, Karsten ; Höppel, H. W. ; Göken, M. (2011)
Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials.
In: Advanced Engineering Materials, 13 (4)
doi: 10.1002/adem.201000270
Artikel, Bibliographie

Jennett, N.M. ; Göken, M. ; Durst, Karsten (2011)
Nano-mechanical testing in materials research and development.
In: Philosophical Magazine, 91 (7-9)
doi: 10.1080/14786435.2011.561524
Artikel, Bibliographie

Maier, V. ; Durst, Karsten ; Mueller, J. ; Backes, B. ; Höppel, H. W. ; Göken, M. (2011)
Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al.
In: Journal of Materials Research, 26 (11)
doi: 10.1557/jmr.2011.156
Artikel, Bibliographie

Ahmed, F. ; Bayerlein, K. ; Rosiwal, S. M. ; Göken, M. ; Durst, Karsten (2011)
Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling.
In: Acta Materialia, 59 (14)
doi: 10.1016/j.actamat.2011.05.015
Artikel, Bibliographie

Rausch, M. H. ; Leipertz, A. ; Fröba, A. P. ; Jakobs, P.-J. ; Durst, Karsten ; Göken, M. (2011)
Studies on the origin of dropwise condensation of steam on ion implanted metallic surfaces.
In: Chemie-Ingenieur-Technik, 83 (4)
doi: 10.1002/cite.201000182
Artikel, Bibliographie

2010

Ahmed, F. ; Durst, Karsten ; Rosiwal, S. ; Fandrey, J. ; Schaufler, J. ; Göken, M. (2010)
In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy.
In: Surface and Coatings Technology, 204 (6-7)
doi: 10.1016/j.surfcoat.2009.04.030
Artikel, Bibliographie

Durst, Karsten ; Hofmann, S. ; Backes, B. ; Mueller, J. ; Göken, M. (2010)
Microimprinting of nanocrystalline metals - Influence of microstructure and work hardening.
In: Journal of Materials Processing Technology, Elsevier, 210 (13)
doi: 10.1016/j.jmatprotec.2010.06.010
Artikel, Bibliographie

Brandt, B. ; Zollfrank, C. ; Franke, O. ; Fromme, J. ; Göken, M. ; Durst, Karsten (2010)
Micromechanics and ultrastructure of pyrolysed softwood cell walls.
In: Acta biomaterialia, 6 (11)
doi: 10.1016/j.actbio.2010.05.026
Artikel, Bibliographie

Nikulina, E. ; Durst, Karsten ; Göken, M. ; Völkl, R. ; Glatzel, U. (2010)
Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission electron microscopy and nanoindentation.
In: International Journal of Materials Research, 101 (5)
doi: 10.3139/146.110316
Artikel, Bibliographie

Kiener, D. ; Durst, Karsten ; Rester, M. ; Minor, A. M. (2010)
Revealing deformation mechanisms with nanoindentation.
In: JOM : The Journal of the Minerals, Metals & Materials Society, 61 (3)
doi: 10.1007/s11837-009-0036-4
Artikel, Bibliographie

Jang, Y.-S. ; Janko, M. ; Maier, V. ; Durst, Karsten ; Travitzky, N. ; Zollfrank, C. (2010)
SiC ceramic micropatterns from polycarbosilanes.
In: Journal of the European Ceramic Society, 30 (13)
doi: 10.1016/j.jeurceramsoc.2010.05.019
Artikel, Bibliographie

Brandt, B. ; Lohbauer, U. ; Göken, M. ; Durst, Karsten (2010)
The influence of particle size on the mechanical properties of dental glass ionomer cements.
In: Advanced Engineering Materials, 12 (12)
doi: 10.1002/adem.201080067
Artikel, Bibliographie

2009

Das, J. ; Pauly, S. ; Boström, M. ; Durst, Karsten ; Göken, M. ; Eckert, Jürgen (2009)
Designing bulk metallic glass and glass matrix composites in martensitic alloys.
In: Journal of Alloys and Compounds, 483 (1-2)
doi: 10.1016/j.jallcom.2008.08.139
Artikel, Bibliographie

Wang, Y. ; Mayer, K.-H. ; Scholz, A. ; Berger, C. ; Chilukuru, H. ; Durst, Karsten ; Blum, W. (2009)
Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650 °C.
In: Materials science and engineering A, 510-511 (C)
doi: 10.1016/j.msea.2008.04.116
Artikel, Bibliographie

Schaufler, J. ; Durst, Karsten ; Massler, O. ; Göken, M. (2009)
In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading.
In: Thin Solid Films, 517 (5)
doi: 10.1016/j.tsf.2008.09.104
Artikel, Bibliographie

Franke, O. ; Durst, Karsten ; Göken, M. (2009)
Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples.
In: Journal of Materials Research, 24 (3)
doi: 10.1557/jmr.2009.0135
Artikel, Bibliographie

Backes, B. ; Durst, Karsten ; Amberger, D. ; Göken, M. (2009)
Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy.
In: Metallurgical and Materials Transactions A, 40 (2)
doi: 10.1007/s11661-008-9720-1
Artikel, Bibliographie

Sadrabadi, P. ; Durst, Karsten ; Göken, M. ; Blum, W. (2009)
Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits.
In: Philosophical Magazine Letters, 89 (6)
doi: 10.1080/09500830902984554
Artikel, Bibliographie

Blum, W. ; Li, Y. J. ; Durst, Karsten (2009)
Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures.
In: Acta Materialia, 57 (17)
doi: 10.1016/j.actamat.2009.07.030
Artikel, Bibliographie

Sadrabadi, P. ; Durst, Karsten ; Göken, M. (2009)
Study on the indentation size effect in CaF2: Dislocation structure and hardness.
In: Acta Materialia, 57 (4)
doi: 10.1016/j.actamat.2008.11.015
Artikel, Bibliographie

Brackes, B. ; Huang, Y. Y. ; Göken, M. ; Durst, Karsten (2009)
The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism-based strain gradient plasticity theory.
In: Journal of Materials Research, 24 (3)
doi: 10.1557/jmr.2009.0123
Artikel, Bibliographie

2008

Durst, Karsten ; Göken, M. ; Pharr, G. M. (2008)
Indentation size effect in spherical and pyramidal indentations.
In: Journal of Physics D: Applied Physics, 41 (7)
doi: 10.1088/0022-3727/41/7/074005
Artikel, Bibliographie

Gelse, K. ; Mühle, C. ; Franke, O. ; Park, J. ; Jehle, M. ; Durst, Karsten ; Göken, M. ; Henning, F. ; Mark, K. von der ; Schneider, H. (2008)
Cell-based resurfacing of large cartilage defects: Long-term evaluation of grafts from autologous transgene-activated periosteal cells in a porcine model of osteoarthritis.
In: Arthritis and Rheumatism, 58 (2)
doi: 10.1002/art.23124
Artikel, Bibliographie

Ndlovu, S. ; Durst, Karsten ; Hoeppel, H.W. ; Göken, M. (2008)
Study on the local damage mechanisms in WC-Co hard metals during scratch testing.
In: Materials Research Society Symposium Proceedings, (1049)
doi: 10.1557/PROC-1049-AA05-16
Artikel, Bibliographie

2007

Wellmann, P. J. ; Hens, P. ; Sakwe, S. A. ; Queren, D. ; Müller, R. ; Durst, Karsten ; Göken, M. (2007)
Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth.
In: Materials Science Forum, (556-557)
doi: 10.4028/www.scientific.net/MSF.556-557.259
Artikel, Bibliographie

Durst, Karsten ; Franke, O. ; Böhner, A. ; Göken, M. (2007)
Indentation size effect in Ni-Fe solid solutions.
In: Acta Materialia, 55 (20)
doi: 10.1016/j.actamat.2007.08.044
Artikel, Bibliographie

Ndlovu, S. ; Durst, Karsten ; Göken, M. (2007)
Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing.
In: Wear, 263 (7-12)
doi: 10.1016/j.wear.2006.11.044
Artikel, Bibliographie

Franke, O. ; Durst, Karsten ; Maier, V. ; Göken, M. ; Birkholz, T. ; Schneider, H. ; Henning, F. ; Gelse, K. (2007)
Mechanical properties of hyaline and repair cartilage studied by nanoindentation.
In: Acta biomaterialia, 3 (6)
doi: 10.1016/j.actbio.2007.04.005
Artikel, Bibliographie

Franke, O. ; Durst, Karsten ; Göken, M. (2007)
Microstructure and local mechanical properties of Pt-modified nickel aluminides on nickel-base superalloys after thermo-mechanical fatigue.
In: Materials science and engineering A, 467 (1-2)
doi: 10.1016/j.msea.2007.02.069
Artikel, Bibliographie

2006

Backes, B. ; Durst, Karsten ; Göken, M. (2006)
Determination of plastic properties of polycrystalline metallic materials by nanoindentation: Experiments and finite element simulations.
In: Philosophical Magazine, 86 (33-35)
doi: 10.1080/14786430600735468
Artikel, Bibliographie

Durst, Karsten ; Backes, B. ; Franke, O. ; Göken, M. (2006)
Indentation size effect in metallic materials: Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations.
In: Acta Materialia, 54 (9)
doi: 10.1016/j.actamat.2006.01.036
Artikel, Bibliographie

Mueller, J. ; Durst, Karsten ; Amberger, D. ; Göken, M. (2006)
Local investigations of the mechanical properties of ultrafine grained metals by nanoindentations.
In: Materials Science Forum, (503-504)
doi: 10.4028/www.scientific.net/MSF.503-504.31
Artikel, Bibliographie

2005

Durst, Karsten ; Backes, B. ; Göken, M. (2005)
Determination of plastic properties of poly crystalline metallic materials by nanoindentation - Experiments and finite element simulations.
In: Materials Research Society Symposium Proceedings, 841 (11.4)
doi: 10.1557/PROC-841-R11.4
Artikel, Bibliographie

Durst, Karsten ; Backes, B. ; Göken, M. (2005)
Indentation size effect in metallic materials: Correcting for the size of the plastic zone.
In: Scripta Materialia, 52 (11)
doi: 10.1016/j.scriptamat.2005.02.009
Artikel, Bibliographie

2004

Durst, Karsten ; Göken, M. ; Vehoff, H. (2004)
Finite element study for nanoindentation measurements on two-phase materials.
In: Journal of Materials Research, 19 (1)
Artikel, Bibliographie

Durst, Karsten ; Göken, M. (2004)
Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys.
In: Materials science and engineering A, 387-389 (1-2 SPEC. ISS)
doi: 10.1016/j.msea.2004.03.079
Artikel, Bibliographie

Durst, Karsten ; Franke, O. ; Göken, M. (2004)
Nanoindentations as a local probe for the mechanical properties and alloying influences in nickel-base superalloys and aluminide coatings.
In: Proceedings of the International Symposium on Superalloys
Artikel, Bibliographie

Schweitzer, E. ; Durst, Karsten ; Amberger, D. ; Göken, M. (2004)
The mechanical properties in the vicinity of grain boundaries in ultrafine-grained and polycrystalline materials studied by nanoindentations.
In: Materials Research Society Symposium Proceedings, (819)
Artikel, Bibliographie

2002

Durst, Karsten ; Göken, M. ; Pharr, G. M. (2002)
Finite element simulation of spherical indentation in the elastic-plastic transition.
In: Materials Research and Advanced Techniques, 93 (9)
doi: 10.3139/146.020857
Artikel, Bibliographie

2001

Durst, Karsten ; Göken, M. (2001)
Quantitative microstructural characterisation by atomic force microscopy and electron microscopy - A comparative study on the superalloy Waspaloy.
In: Praktische Metallographie, 38 (4)
Artikel, Bibliographie

Diese Liste wurde am Tue Mar 26 02:24:24 2024 CET generiert.