TU Darmstadt / ULB / TUbiblio

Browse by Person

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Date | Language
Number of items: 56.

Ndlovu, S.N. and Durst, Karsten and Göken, M. Fischer, Alfons and Bobzin, Kirsten (eds.) (2018):
Deformation of WC-Co Hardmetals During Scratch Testing.
In: Friction, Wear and Wear Protection: International Symposium on Friction, Wear and Wear Protection, Weinheim, Wiley, pp. 171-177, DOI: 10.1002/9783527628513.ch20,
[Book Section]

Rehman, Hamad ur and Durst, Karsten and Neumaier, S. and Satoh, A. and Reed, R. and Göken, M. (2017):
On the temperature dependent strengthening of nickel by transition metal solutes.
In: Acta Materialia, (137), pp. 54-63, ISSN 1359-6454,
[Article]

Ast, J. and Göken, M. and Durst, Karsten (2017):
Size-dependent fracture toughness of tungsten.
In: Acta Materialia, (138), pp. 198-211, ISSN 1359-6454,
[Article]

Krottenthaler, M. and Benker, L. and Mughal, M. Z. and Sebastiani, M. and Durst, K. and Göken, M. (2016):
Effect of elastic anisotropy on strain relief and residual stress determination in cubic systems by FIB-DIC experiments.
In: Materials & Design, 112Elsevier Science Ltd., Oxford, England, pp. 505-511, ISSN 02641275,
DOI: 10.1016/j.matdes.2016.09.046,
[Online-Edition: https://doi.org/10.1016/j.matdes.2016.09.046],
[Article]

Ast, J. and Przybilla, T. and Maier, V. and Durst, Karsten and Göken, M. (2014):
Microcantilever bending experiments in NiAl - Evaluation, size effects, and crack tip plasticity.
In: Journal of Materials Research, 29 (18), Cambridge University Press, pp. 2129-2140, ISSN 0884-2914,
[Online-Edition: https://doi.org/10.1557/jmr.2014.240],
[Article]

Wheeler, J. M. and Maier, V. and Durst, K. and Göken, M. and Michler, J. (2013):
Activation parameters for deformation of ultrafine-grained aluminium as determined by indentation strain rate jumps at elevated temperature.
In: Materials Science and Engineering: A, 585Elsevier Science Publishing, pp. 108-113, ISSN 09215093,
[Online-Edition: http://dx.doi.org/10.1016/j.msea.2013.07.033],
[Article]

Schmid, Christoph and Maier, V. and Schaufler, J. and Butz, B. and Spiecker, E. and Meier, S. and Göken, M. and Durst, Karsten (2013):
Highly resolved analysis of the chemistry and mechanical properties of an a-C:H coating system by nanoindentation and auger electron spectroscopy.
In: Thin Solid Films, (528), pp. 263-268, ISSN 00406090,
DOI: 10.1016/j.tsf.2012.05.092,
[Article]

Webler, R. and Krottenthaler, M. and Neumeier, S. and Durst, Karsten and Göken, M. (2013):
Local fracture toughness and residual stress measurements on NiAl bond coats by micro cantilever and fib-based bar milling tests.
In: Proceedings of the International Symposium on Superalloys, Hobroken, pp. 93-102, DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-84885926632&partnerID=40&md5=cfda36f793747faa202f38e4f0e327f9,
[Book Section]

Haynes, J. and Maier, V. and Durst, Karsten and Göken, M. (2013):
Strain-rate sensitivity (SRS) of nickel by instrumented indentation.
In: Conference Proceedings of the Society for Experimental Mechanics Series, In: MEMS and Nanotechnology, New York, pp. 47-52, DOI: 10.1007/978-1-4614-4436-7_8,
[Online-Edition: https://link.springer.com/chapter/10.1007/978-1-4614-4436-7_...],
[Book Section]

Maier, V. and Merle, B. and Göken, M. and Durst, Karsten (2013):
An improved long-term nanoindentation creep testing approach for studying the local deformation processes in nanocrystalline metals at room and elevated temperatures.
In: Journal of Materials Research, 28 (9), Cambridge University Press, pp. 1177-1188, ISSN 0884-2914,
[Online-Edition: https://doi.org/10.1557/jmr.2013.39],
[Article]

Krottenthaler, M. and Schmid, Christoph and Schaufler, J. and Durst, Karsten and Göken, M. (2013):
A simple method for residual stress measurements in thin films by means of focused ion beam milling and digital image correlation.
In: Surface and Coatings Technology, (215), Elsevier Science Publishing Company, pp. 247-252, ISSN 02578972,
DOI: 10.1016/j.surfcoat.2012.08.095,
[Article]

Schaufler, J. and Schmid, Christoph and Durst, Karsten and Göken, M. (2012):
Determination of the interfacial strength and fracture toughness of a-C:H coatings by in-situ microcantilever bending.
In: Thin Solid Films, (522), pp. 480-484, ISSN 00406090,
DOI: 10.1016/j.tsf.2012.08.031,
[Article]

Meszaros, R. and Merle, B. and Wild, M. and Durst, Karsten and Göken, M. and Wondraczek, L. (2012):
Effect of thermal annealing on the mechanical properties of low-emissivity physical vapor deposited multilayer-coatings for architectural applications.
In: Thin Solid Films, 520 (24), pp. 7130-7135, ISSN 00406090,
DOI: 10.1016/j.tsf.2012.07.086,
[Article]

Merle, B. and Maier, V. and Göken, M. and Durst, Karsten (2012):
Experimental determination of the effective indenter shape and ε-factor for nanoindentation by continuously measuring the unloading stiffness.
In: Journal of Materials Research, 27 (1), pp. 214-221, ISSN 0884-2914,
DOI: 10.1557/jmr.2011.245,
[Article]

Iqbal, F. and Ast, J. and Göken, M. and Durst, Karsten (2012):
In situ micro-cantilever tests to study fracture properties of NiAl single crystals.
In: Acta Materialia, 60 (3), pp. 1193-1200, ISSN 13596454,
DOI: 10.1016/j.actamat.2011.10.060,
[Article]

Webler, R. and Krottenthaler, M. and Neumaier, S. and Durst, Karsten and Göken, M. (2012):
Local Fracture Toughness and Residual Stress Measurements on NiAl Bond Coats by Micro Cantilever and FIB Based Bar Milling Tests.
In: Superalloys, Wiley, pp. 93-102, DOI: 10.1002/9781118516430.ch10,
[Article]

Schaufler, J. and Durst, Karsten and Haas, T. and Nolte, R. and Höppel, H. W. and Göken, M. (2012):
The influence of hydrogenated amorphous carbon coatings (a-C:H) on the fatigue life of coated steel specimens.
In: International Journal of Fatigue, (37), Elsevier, pp. 1-7, ISSN 0142-1123,
DOI: 10.1016/j.ijfatigue.2011.09.008,
[Article]

Schaufler, J. and Yang, G. and Durst, Karsten and Spiecker, E. and Göken, M. (2011):
Microscopic study on the interfacial strength of hydrogenated amorphous carbon coating systems.
In: Surface and Coatings Technology, 205 (11), pp. 3429-3433, ISSN 0257-8972,
DOI: 10.1016/j.surfcoat.2010.12.005,
[Article]

Franke, O. and Göken, M. and Meyers, M. A. and Durst, Karsten and Hodge, A. M. (2011):
Dynamic nanoindentation of articular porcine cartilage.
In: Materials Science and Engineering C, 31 (4), pp. 789-795, DOI: 10.1016/j.msec.2010.12.005,
[Article]

Lodes, M.A. and Hartmaier, A. and Göken, M. and Durst, Karsten (2011):
Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations.
In: Acta Materialia, 59 (11), pp. 4264-4273, ISSN 1359-6454,
DOI: 10.1016/j.actamat.2011.03.050,
[Article]

Böhner, A. and Maier, V. and Durst, Karsten and Höppel, H. W. and Göken, M. (2011):
Macro- and nanomechanical properties and strain rate sensitivity of accumulative roll bonded and equal channel angular pressed ultrafine-grained materials.
In: Advanced Engineering Materials, 13 (4), pp. 251-255, ISSN 1438-1656,
DOI: 10.1002/adem.201000270,
[Article]

Jennett, N.M. and Göken, M. and Durst, Karsten (2011):
Nano-mechanical testing in materials research and development.
In: Philosophical Magazine, 91 (7-9), Taylor & Francis, pp. 1035-1036, ISSN 1478-6435,
DOI: 10.1080/14786435.2011.561524,
[Article]

Maier, V. and Durst, Karsten and Mueller, J. and Backes, B. and Höppel, H. W. and Göken, M. (2011):
Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al.
In: Journal of Materials Research, 26 (11), pp. 1421-1430, ISSN 0884-2914,
DOI: 10.1557/jmr.2011.156,
[Article]

Ahmed, F. and Bayerlein, K. and Rosiwal, S.M. and Göken, M. and Durst, Karsten (2011):
Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling.
In: Acta Materialia, 59 (14), pp. 5422-5433, ISSN 1359-6454,
DOI: 10.1016/j.actamat.2011.05.015,
[Article]

Rausch, M. H. and Leipertz, A. and Fröba, A. P. and Jakobs, P.-J. and Durst, Karsten and Göken, M. (2011):
Studies on the origin of dropwise condensation of steam on ion implanted metallic surfaces.
In: Chemie-Ingenieur-Technik, 83 (4), pp. 545-551, DOI: 10.1002/cite.201000182,
[Article]

Ahmed, F. and Durst, Karsten and Rosiwal, S. and Fandrey, J. and Schaufler, J. and Göken, M. (2010):
In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy.
In: Surface and Coatings Technology, 204 (6-7), pp. 1022-1025, ISSN 0257-8972,
DOI: 10.1016/j.surfcoat.2009.04.030,
[Article]

Durst, Karsten and Hofmann, S. and Backes, B. and Mueller, J. and Göken, M. (2010):
Microimprinting of nanocrystalline metals - Influence of microstructure and work hardening.
In: Journal of Materials Processing Technology, Elsevier, 210 (13), pp. 1787-1793, ISSN 0924-0136,
DOI: 10.1016/j.jmatprotec.2010.06.010,
[Article]

Brandt, B. and Zollfrank, C. and Franke, O. and Fromme, J. and Göken, M. and Durst, Karsten (2010):
Micromechanics and ultrastructure of pyrolysed softwood cell walls.
In: Acta biomaterialia, 6 (11), pp. 4345-4351, ISSN 1878-7568,
DOI: 10.1016/j.actbio.2010.05.026,
[Article]

Nikulina, E. and Durst, Karsten and Göken, M. and Völkl, R. and Glatzel, U. (2010):
Microstructural and micromechanical characterisation of a Pt-Al-Cr-Ni-Re alloy by means of transmission electron microscopy and nanoindentation.
In: International Journal of Materials Research, 101 (5), Carl Hanser Verlag GmbH & Co. KG, pp. 585-588, ISSN 1862-5282,
DOI: 10.3139/146.110316,
[Article]

Brandt, B. and Lohbauer, U. and Göken, M. and Durst, Karsten (2010):
The influence of particle size on the mechanical properties of dental glass ionomer cements.
In: Advanced Engineering Materials, 12 (12), pp. B684-B689, ISSN 1438-1656,
DOI: 10.1002/adem.201080067,
[Article]

Das, J. and Pauly, S. and Boström, M. and Durst, Karsten and Göken, M. and Eckert, Jürgen (2009):
Designing bulk metallic glass and glass matrix composites in martensitic alloys.
In: Journal of Alloys and Compounds, 483 (1-2), Elsevier, pp. 97-101, ISSN 0925-8388,
DOI: 10.1016/j.jallcom.2008.08.139,
[Article]

Schaufler, J. and Durst, Karsten and Massler, O. and Göken, M. (2009):
In-situ investigation on the deformation and damage behaviour of diamond-like carbon coated thin films under uniaxial loading.
In: Thin Solid Films, 517 (5), pp. 1681-1685, ISSN 0040-6090,
DOI: 10.1016/j.tsf.2008.09.104,
[Article]

Franke, O. and Durst, Karsten and Göken, M. (2009):
Nanoindentation investigations to study solid solution hardening in Ni-based diffusion couples.
In: Journal of Materials Research, 24 (3), pp. 1127-1134, ISSN 0884-2914,
DOI: 10.1557/jmr.2009.0135,
[Article]

Backes, B. and Durst, Karsten and Amberger, D. and Göken, M. (2009):
Particle hardening in creep-resistant Mg-Alloy MRI 230D probed by nanoindenting atomic force microscopy.
In: Metallurgical and Materials Transactions A, 40 (2), pp. 257-261, DOI: 10.1007/s11661-008-9720-1,
[Article]

Sadrabadi, P. and Durst, Karsten and Göken, M. and Blum, W. (2009):
Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits.
In: Philosophical Magazine Letters, 89 (6), pp. 391-398, DOI: 10.1080/09500830902984554,
[Article]

Sadrabadi, P. and Durst, Karsten and Göken, M. (2009):
Study on the indentation size effect in CaF2: Dislocation structure and hardness.
In: Acta Materialia, 57 (4), pp. 1281-1289, ISSN 1359-6454,
DOI: 10.1016/j.actamat.2008.11.015,
[Article]

Brackes, B. and Huang, Y. Y. and Göken, M. and Durst, Karsten (2009):
The correlation between the internal material length scale and the microstructure in nanoindentation experiments and simulations using the conventional mechanism-based strain gradient plasticity theory.
In: Journal of Materials Research, 24 (3), pp. 1197-1207, ISSN 0884-2914,
DOI: 10.1557/jmr.2009.0123,
[Article]

Durst, Karsten and Göken, M. and Pharr, G. M. (2008):
Indentation size effect in spherical and pyramidal indentations.
In: Journal of Physics D: Applied Physics, 41 (7), IOP Publishing, pp. 074005, ISSN 0022-3727,
DOI: 10.1088/0022-3727/41/7/074005,
[Article]

Gelse, K. and Mühle, C. and Franke, O. and Park, J. and Jehle, M. and Durst, Karsten and Göken, M. and Henning, F. and Von Der Mark, K. and Schneider, H. (2008):
Cell-based resurfacing of large cartilage defects: Long-term evaluation of grafts from autologous transgene-activated periosteal cells in a porcine model of osteoarthritis.
In: Arthritis and Rheumatism, 58 (2), pp. 475-488, DOI: 10.1002/art.23124,
[Article]

Ndlovu, S. and Durst, Karsten and Hoeppel, H.W. and Göken, M. (2008):
Study on the local damage mechanisms in WC-Co hard metals during scratch testing.
In: Materials Research Society Symposium Proceedings, (1049), pp. 75-81, DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-55249096010&partnerID=40&md5=fb11b97123bb01635ff35d1ff0f09426,
[Article]

Wellmann, P. J. and Hens, P. and Sakwe, S. A. and Queren, D. and Müller, R. and Durst, Karsten and Göken, M. (2007):
Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth.
In: Materials Science Forum, (556-557), Trans Tech Publications Switzerland, pp. 259-262, ISSN 1662-9752,
DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-38449110238&partnerID=40&md5=9602e1f5bf698501469fd048645295df,
[Article]

Durst, Karsten and Franke, O. and Böhner, A. and Göken, M. (2007):
Indentation size effect in Ni-Fe solid solutions.
In: Acta Materialia, 55 (20), pp. 6825-6833, ISSN 1359-6454,
DOI: 10.1016/j.actamat.2007.08.044,
[Article]

Ndlovu, S. and Durst, Karsten and Göken, M. (2007):
Investigation of the sliding contact properties of WC-Co hard metals using nanoscratch testing.
In: Wear, 263 (7-12), pp. 1602-1609, ISSN 0043-1648,
DOI: 10.1016/j.wear.2006.11.044,
[Article]

Franke, O. and Durst, Karsten and Maier, V. and Göken, M. and Birkholz, T. and Schneider, H. and Henning, F. and Gelse, K. (2007):
Mechanical properties of hyaline and repair cartilage studied by nanoindentation.
In: Acta biomaterialia, 3 (6), pp. 873-881, ISSN 1878-7568,
DOI: 10.1016/j.actbio.2007.04.005,
[Article]

Franke, O. and Durst, Karsten and Göken, M. (2007):
Microstructure and local mechanical properties of Pt-modified nickel aluminides on nickel-base superalloys after thermo-mechanical fatigue.
In: Materials science and engineering A, 467 (1-2), pp. 15-23, ISSN 0921-5093,
DOI: 10.1016/j.msea.2007.02.069,
[Article]

Backes, B. and Durst, Karsten and Göken, M. (2006):
Determination of plastic properties of polycrystalline metallic materials by nanoindentation: Experiments and finite element simulations.
In: Philosophical Magazine, 86 (33-35), Taylor & Francis, pp. 5541-5551, ISSN 1478-6435,
DOI: 10.1080/14786430600735468,
[Article]

Durst, Karsten and Backes, B. and Franke, O. and Göken, M. (2006):
Indentation size effect in metallic materials: Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations.
In: Acta Materialia, 54 (9), pp. 2547-2555, ISSN 1359-6454,
DOI: 10.1016/j.actamat.2006.01.036,
[Article]

Mueller, J. and Durst, Karsten and Amberger, D. and Göken, M. (2006):
Local investigations of the mechanical properties of ultrafine grained metals by nanoindentations.
In: Materials Science Forum, (503-504), Trans Tech Publications Switzerland, pp. 31-36, ISSN 1662-9752,
DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-33646140270&partnerID=40&md5=6d9f68fd92aef88a176c6a042b6e3721,
[Article]

Durst, Karsten and Backes, B. and Göken, M. (2005):
Determination of plastic properties of poly crystalline metallic materials by nanoindentation - Experiments and finite element simulations.
In: Materials Research Society Symposium Proceedings, 841 (11.4), pp. 311-316, DOI: https://www.scopus.com/inward/record.uri?eid=2-s2.0-23844499422&partnerID=40&md5=2a13dcf9518bb0e928a08192766f4482,
[Article]

Durst, Karsten and Backes, B. and Göken, M. (2005):
Indentation size effect in metallic materials: Correcting for the size of the plastic zone.
In: Scripta Materialia, 52 (11), Elsevier Science Publishing, pp. 1093-1097, ISSN 1359-6462,
DOI: 10.1016/j.scriptamat.2005.02.009,
[Article]

Durst, Karsten and Göken, M. and Vehoff, H. (2004):
Finite element study for nanoindentation measurements on two-phase materials.
In: Journal of Materials Research, 19 (1), pp. 85-93, ISSN 0884-2914,
[Article]

Durst, Karsten and Göken, M. (2004):
Micromechanical characterisation of the influence of rhenium on the mechanical properties in nickel-base superalloys.
In: Materials science and engineering A, 387-389 (1-2 SPEC. ISS), pp. 312-316, ISSN 0921-5093,
DOI: 10.1016/j.msea.2004.03.079,
[Article]

Durst, Karsten and Franke, O. and Göken, M. (2004):
Nanoindentations as a local probe for the mechanical properties and alloying influences in nickel-base superalloys and aluminide coatings.
In: Proceedings of the International Symposium on Superalloys, pp. 467-476, [Article]

Schweitzer, E. and Durst, Karsten and Amberger, D. and Göken, M. (2004):
The mechanical properties in the vicinity of grain boundaries in ultrafine-grained and polycrystalline materials studied by nanoindentations.
In: Materials Research Society Symposium Proceedings, (819), pp. 79-84, [Article]

Durst, Karsten and Göken, M. and Pharr, G. M. (2002):
Finite element simulation of spherical indentation in the elastic-plastic transition.
In: Materials Research and Advanced Techniques, 93 (9), pp. 857-861, DOI: 10.3139/146.020857,
[Article]

Durst, Karsten and Göken, M. (2001):
Quantitative microstructural characterisation by atomic force microscopy and electron microscopy - A comparative study on the superalloy Waspaloy.
In: Praktische Metallographie, 38 (4), pp. 197-215, [Article]

This list was generated on Tue May 26 02:01:17 2020 CEST.