TU Darmstadt / ULB / TUbiblio

Items in division

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | Item Type | Language | No Grouping
Jump to: 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997
Number of items at this level: 423.

2019

Alter, Christian (2019):
Nicht-lokale Versagensformulierung zur Simulation des spannungsratenabhängigen Bruchverhaltens von Verbundsicherheitsglas und ihre Anwendung beim Kopfaufprall auf Windschutzscheiben.
Wiesbaden, Springer Vieweg, TU Darmstadt, In: Mechanik, Werkstoffe und Konstruktion im Bauwesen, 49, ISBN 978-3-658-25285-4,
[Ph.D. Thesis]

Weller, B. and Schneider, Jens and Reich, S. and Ebert, J. (2019):
Kontaktmaterialien zur Einleitung von Druckkräften in Glas.
In: Bauingenieur, Springer-VDI-Verlag, pp. 118-127, 85, (3), [Article]

de Witte, Dennis and Fehlhaber, Thomas (2019):
3D-Clay Printing - Next generation Brickwork.
In: Ceramic Forum International, Göller Verlag GmbH, pp. E54-E58, 96, (4-5/2019), ISSN 01739913,
[Online-Edition: https://www.cfi.de/issuebrowser/cfi_2019_04_05_2/html5/index...],
[Article]

Prieto Hoces, A.I. and Knaack, Ulrich and Auer, T. and Klein, T. (2019):
COOLFACADE: State-of-the-art review and evaluation of solar cooling technologies on their potential for facade integration.
In: Renewable and Sustainable Energy Reviews, pp. 395-414, (101), DOI: 10.1016/j.rser.2018.11.015,
[Article]

Kwon, M. and Remoy, H. T. and van den Dobbelsteen, A. A. J. F. and Knaack, Ulrich (2019):
Personal control and environmental user satisfaction in office buildings: Results of case studies in the Netherlands.
In: Building and Environment, pp. 428-435, (149), DOI: 10.1016/j.buildenv.2018.12.021,
[Article]

2018

Knaack, Ulrich (2018):
Fused glass deposition modelling for applications in the built environment.
In: Materialwissenschaft und Werkstofftechnik, Wiley, pp. 870-880, 49, (7), ISSN 0933-5137,
DOI: 10.1002/mawe.201800075,
[Article]

Knaack, Ulrich
Luscurere, Peter (ed.) (2018):
Design for deconstruction, or why aluminium and glass is better than wood?
In: Circulariteit, op weg naar 2050, Delft, TU Delft Open, pp. 114-123, [Book Section]

Pourmoghaddam, Navid and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2018):
Prediction of the 2D macro-scale fragmentation of tempered glass using random Voronoi tesselations.
In: Forschungskolloquium 2018 Grasellenbach., Springer Vieweg, pp. 56-59, DOI: 10.1007/978-3-658-23627-4_21,
[Online-Edition: https://doi.org/10.1007/978-3-658-23627-4_21],
[Article]

Pourmoghaddam, Navid and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2018):
Relationship between strain energy and fracture pattern morphology of thermally tempered glass for the prediction of the 2D macro-scale fragmentation of glass.
In: Glass Structures and Engineering, Springer International Publishing, ISSN 2363-5142,
DOI: 10.1007/s40940-018-00091-1,
[Online-Edition: https://doi.org/10.1007/s40940-018-00091-1],
[Article]

Borg Costanzi, Chris and Ahmed, Z.Y. and Schipper, H. R. and Bos, F.P. and Knaack, Ulrich and Wolfs, R. J. M. (2018):
3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure.
In: Automation in Construction, pp. 395-404, (94), DOI: 10.1016/j.autcon.2018.06.013,
[Article]

Prieto Hoces, A.I. and Knaack, Ulrich and Auer, T. and Klein, T. (2018):
Passive cooling & climate responsive façade design: Exploring the limits of passive cooling strategies to improve the performance of commercial buildings in warm climates.
In: Energy and Buildings, pp. 30-47, (175), DOI: 10.1016/j.enbuild.2018.06.016,
[Article]

Pourmoghaddam, Navid and Kraus, Michael and Schneider, Jens and Siebert, Geralt
Schneider, Jens and Weller, Bernhard (eds.) (2018):
The geometrical properties of random 2D Voronoi tesselations for the prediction of the tempered glass fracture pattern.
In: Engineered Transparency 2018, [Conference or Workshop Item]

Knaack, Ulrich and Linke, Hans-Joachim (2018):
Facades within sustainable urban development.
In: Workshop „Facades within sustainable urban development“, Ho Chi Minh City Vietnam, 02.07.2018, [Online-Edition: https://facadeworld.com/2018/06/14/workshop-facades-within-s...],
[Conference or Workshop Item]

Krimm, Jochen and Techen, Holger and Knaack, Ulrich (2018):
Update urban facades design for quieter outdoor spaces.
In: PowerSkin Conference - Munich, Germany, München, 19.01.2017, [Conference or Workshop Item]

Hildebrand, L. and Konstantinou, T. and Kosanović, S. and Klein, T. and Knaack, Ulrich
TU Delft, Open (ed.) (2018):
Origin and Development of Environmental Design.
In: Sustainable and resilient building design: approaches, methods and tools, Delft, pp. 17-36, [Book Section]

Klein, T. and Knaack, Ulrich and Astudillo, J. and Chica, J.A. (2018):
JFDE Special ICAE2018 – Envelope 4.0.
In: Journal of Facade Design & Engineering, Vol. 6, (No. 2), DOI: 10.7480/jfde.2018.2.2297,
[Article]

Knaack, Ulrich and Borg Costanzi, Chris and Schipper, H. R. and Bos, F. P. and Wolfs, R. J. M. (2018):
3D Printing Concrete on temporary surfaces: THe design and fabrication of a concrete shell.
In: Automation in Construction, Elsevier, pp. 395-404, 94, ISSN 0926-5805,
DOI: 10.1016/j.autcon.2018.06.013,
[Article]

Prieto Hoces, A.I. and Knaack, Ulrich and Auer, T. and Klein, T. (2018):
Feasibility Study of Self-Sufficient Solar Cooling Façade Applications in Different Warm Regions.
In: energies, 11, (6), ISSN 1996-1073,
DOI: 10.3390/en11061475,
[Article]

Sarakinioti, M. V. and Turrin, Michela and Konstantinou, Thaleia and Tenpierik, Martin and Knaack, Ulrich (2018):
Developing an integrated 3D-printed façade with complex geometries for active temperature control.
In: Materials Today Communications, pp. 275-279, (15), DOI: 10.1016/j.mtcomm.2018.02.027,
[Article]

Sarakinioti, M. V. and Konstantinou, Thaleia and Turrin, Michela and Tenpierik, Martin and Loonen, R. C. G. M. and de Klijn-Chevalerias, M. L. and Knaack, Ulrich (2018):
Development and prototyping of an integrated 3D-printed façade for thermal regulation in complex geometries.
In: Journal of Facade Design and Engineering, pp. 29-40, 6, (2), DOI: 10.7480/jfde.2018.2.2081,
[Article]

Pourmoghaddam, Navid and Schneider, Jens (2018):
Determination of the engine power for quenching of glass by forced convection: simplified model and experimental validation of residual stress levels.
In: Glass Structures and Engineering, DOI: 10.1007/s40940-018-0078-5,
[Online-Edition: https://doi.org/10.1007/s40940-018-0078-5],
[Article]

de Witte, Dennis (2018):
3D-Druck von Tonkeramik für Freiformfassaden.
In: Fassade, Verlagsanstalt Handwerk GmbH, p. 29, 2018, (5), ISSN 0941-7796,
[Online-Edition: http://flippingbook.verlagsanstalt-handwerk.de/die-fassade/2...],
[Article]

Knaack, Ulrich and Koenders, E. A. B.
Knaack, Ulrich and Koenders, E. A. B. (eds.) (2018):
Bauphysik der Fassade.
Darmstadt, Birkhäuser, [Book]

Böke, Jens and Knaack, Ulrich and Hemmerling, Marco (2018):
State-of-the-art of intelligent building envelopes in the context of intelligent technical systems.
In: Intelligent Buildings International, DOI: 10.1080/17508975.2018.1447437,
[Article]

Pourmoghaddam, Navid and Schneider, Jens (2018):
Finite-element analysis of the residual stresses in tempered glass plates with holes or cut-outs.
In: Glass Structures and Engineering, DOI: 10.1007/s40940-018-0055-z,
[Online-Edition: https://doi.org/10.1007/s40940-018-0055-z],
[Article]

Pourmoghaddam, Navid and Schneider, Jens (2018):
Experimental investigation into the fragment size of tempered glass.
In: Glass Struct. Eng., DOI: 10.1007/s40940-018-0062-0,
[Online-Edition: https://doi.org/10.1007/s40940-018-0062-0],
[Article]

Pourmoghaddam, Navid and Schneider, Jens (2018):
Doppelringbiegeversuche an Glasplatten aus Kalk-Natron-Silikatglas bei erhöhten Temperaturen bis in den Transformationsbereich.
In: Glasbau 2018, [Article]

Drass, Michael and Schneider, Jens and Kolling, Stefan (2018):
Novel volumetric Helmholtz free energy function accounting for isotropic cavitation at finite strains.
In: Materials & Design, Elsevier, pp. 71-89, 138, ISSN 0264-1275,
DOI: 10.1016/j.matdes.2017.10.059,
[Article]

Kuntsche, Johannes K. and Schuster, Miriam and Schneider, Jens (2018):
Bemessung von Verbundsicherheitsglas unter Berücksichtigung des Schubverbunds durch polymere Zwischenschichten.
In: Der Bauingenieur, Springer-VDI-Verlag GmbH & Co. KG, pp. 28-36, 93, ISSN 0005-6650,
[Article]

Sarakinioti, V. and Turrin, M. and Tenpierik, M. and Konstantinou, T. and Knaack, Ulrich (2018):
Developing an integrated 3D-printed façade with complex geometries for active temperature control.
In: Materials Today Communications, pp. 275-279, (15), DOI: 10.1016/j.mtcomm.2018.02.027,
[Article]

Luscuere, Peter (2018):
Design for deconstruction: Or why aluminium and glass is better than wood?
In: Circulariteit: Op weg naar 2050?, TU Delft Open, pp. 115-123, [Book Section]

Staudt, Yves (2018):
Proposal of a Failure Criterion of Adhesively Bonded Connections with Silicone.
Darmstadt, Technische Universität, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/7287],
[Ph.D. Thesis]

Abele, Eberhard and Schneider, Jens and Beck, Martin and Andreas, Maier (eds.) (2018):
ETA – die Modell-Fabrik, Energieeffizienz weiter gedacht.
Darmstadt, ISBN 978-3-00-059397-0,
[Book]

Schneider, Jens and Müller-Braun, Steffen and Peters, Timon and Pourmoghaddam, Navid and Schuster, Miriam (2018):
Neue Dimensionen beim Bauen mit Glas.
In: 22. Dresdner Baustatik-Seminar, Dresden, [Conference or Workshop Item]

Schuster, Miriam and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2018):
Untersuchungen zum Zeit‐Temperatur‐Superpositions‐Prinzip von Steifigkeiten polymerer Verbundglaszwischenschichten.
In: DGM FA Polymerwerkstoffe, Kassel, [Conference or Workshop Item]

Schuster, Miriam and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2018):
Investigations on the thermorheologically complex material behaviour of the laminated safety glass interlayer ethylene-vinyl-acetate.
In: Glass Structures & Engineering, pp. 373-388, 3, (2), ISSN 2363-5142,
DOI: 10.1007/s40940-018-0074-9,
[Online-Edition: https://doi.org/10.1007/s40940-018-0074-9],
[Article]

Kraus, Michael and Schuster, Miriam and Botz, Martin and Schneider, Jens and Siebert, Geralt (2018):
Thermorheologische Untersuchungen der Verbundglaszwischenschichten PVB und EVA.
In: Glasbau 2018, Dresden, [Conference or Workshop Item]

Pottgiesser, U. and Knaack, Ulrich and Louter, C. and Luible, A. and Konstantinou, T. and Metcalfe, D. and Henriksen, T. (2018):
Dissemination, Future Research and Education: Adaptive Facade Network.
TU Delft Open, ISBN 978-94-6366-112-6,
[Book]

Luible, A. and Gosztonyi, S. and Overend, M. and Aelenei, L. and Krstic-Furundzic, A. and Perino, M. and Goya, F. and Wellershoff, F. and Attia, S. and Pottgiesser, U. and Knaack, U. and Louter, P.C. (2018):
Facade 2018 - Adaptive! : Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference.
TU Delft Open, ISBN 9789463667027,
[Online-Edition: https://www.researchgate.net/publication/329196292_Facade_20...],
[Book]

Prieto Hoces, A.I. and Knaack, U. and Klein, T. and Auer, T. (2018):
Possibilities and Constraints for the Widespread Application of Solar Cooling Integrated Façades.
In: Journal of Facade Design & Engineering, pp. 10-18, 6, (3), DOI: 10.7480/jfde.2018.3.2468,
[Article]

Juaristi, M. and Monge-Barrio, A. and Knaack, U. and Gómez-Acebo, T. (2018):
Smart and multifunctional materials and their possible application in façade systems.
In: Journal of Facade Design and Engineering, pp. 19-33, 6, (3), ISSN 2213-3038,
DOI: 10.7480/jfde.2018.3.2475,
[Article]

Drass, Michael and Schneider, Jens and Kolling, Stefan (2018):
Damage Effects of Adhesives in Modern Glass Façades: A Micro-Mechanically Motivated Volumetric Damage Model for Poro-Hyperelastic Materials.
In: International Journal of Mechanics and Materials in Design, Springer, pp. 1-26, (4/2018), ISSN 1569-1713,
DOI: 10.1007/s10999-017-9392-3,
[Article]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2018):
Adhesive connections in glass structures— part II: material parameter identification on thin structural silicone.
In: Glass Structures & Engineering, Springer, pp. 55-74, 3, (1), ISSN 2363-5142,
DOI: 10.1007/s40940-017-0048-3,
[Article]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2018):
Adhesive connections in glass structures— part I: experiments and analytics on thin structural silicone.
In: Glass Structures & Engineering, pp. 39-54, 3, (1), DOI: 10.1007/s40940-017-0046-5,
[Article]

Borg Costanzi, Chris and de Witte, Dennis and Akerboom, Robert (2018):
New Material systems for 3D printing.
In: RuMoer, pp. 39-47, 69, (2018), ISSN 1567-7699,
[Online-Edition: https://issuu.com/rumoer/docs/rumoer_69_cover_1-unito/40],
[Article]

de Witte, Dennis and de Klijn-Chevalerias, M. L. and Loonen, R. C. G. M. and Hensen, J. L. M. and Knaack, Ulrich and Zimmermann, Gregor
Bakker, Siebe (ed.)
4TU.Bouw (Corporate Creator) (2018):
Convective Concrete.
In: Research to reality, Delft, TU Delft Open, pp. 80-83, [Book Section]

Müller-Braun, Steffen and Franz, Johannes and Schneider, Jens and Schneider, Frank (2018):
Optische Merkmale der Glaskante nach Glaszuschnitt mit Schneidrädchen.
In: Glasbau 2018, Ernst & Sohn, pp. 99-111, 2, (1), DOI: 10.1002/cepa.634,
[Article]

2017

Knaack, Ulrich and Pottgiesser, Uta (2017):
efnMOBILE 2.0 / Efficient Envelopes.
In: efnMOBILE 2.0 / Efficient Envelopes, [Online-Edition: https://books.bk.tudelft.nl/index.php/press/catalog/book/600],
[Book Section]

Cruz, P.J.S. and Knaack, Ulrich and Figueiredo, B. and De Witte, Dennis (2017):
Ceramic 3D printing: the future of brick architecture.
In: IASS 2017, Hamburg, 25-28 September 2017, [Conference or Workshop Item]

Knaack, Ulrich (2017):
Fassadentechnik Systeme, Konstruktion und Innovation: Akademieseminare.
Akademie der Architektenkammer, [Book]

Cruz, P.J.S. and Knaack, Ulrich and Figueiredo, B. and de Witte, Dennis (2017):
Ceramic 3D printing: The future of brick architecture.
In: ASS Annual Symposium 2017 - Hamburg, Germany, Hamburg, Germany, 25 Sep 2017 - 28 Sep 2017, [Conference or Workshop Item]

Boxheimer, Kaja (2017):
Cyclic Fatigue of Glass Panels.
In: Glass Performance Days 2007, Tampere, Finland, [Conference or Workshop Item]

Schneider, Jens and Hilcken, Jonas (2017):
Nickel Sulphide (NiS-) induced failure of glass : fracture mechanics model and verification by fracture data.
In: engineered transparency international conference at glasstec, 2010, pp. 125-136, [Book Section]

Knaack, Ulrich and Bilow, Marcel (2017):
JFDE Special ICAE 2015.
In: Journal of Facade Design and Engineering, 3, (1), ISSN 2213-3038,
[Online-Edition: http://journals.library.tudelft.nl/index.php/jfde/issue/view...],
[Article]

Knaack, Ulrich (2017):
Next steps on the facade roadmap.
In: ICBEST 2017: International Conference on Building Envelope Systems and Technologies, Istanbul, Turkey, 15 May 2017 → 18 May 2017, [Conference or Workshop Item]

Knaack, Ulrich (2017):
The role of Glass in Adaptive Facades.
In: Plenary Session GlassCon Global 2016 Conference, Boston USA, July 6th-9th, 2016, [Conference or Workshop Item]

de Klijn-Chevalerias, M. L. and Loonen, R. C. G. M. and Zarzycka, A. and de Witte, Dennis and Sarakinioti, M. V. and Hensen, J. L. M.
Turrin, Michela and Peters, Brady and O'Brien, Wiliam and Stouffs, Rudi and Dogan, Timur (eds.) (2017):
Assisting the development of innovative responsive facade elements using building performance simulation.
In: Proceedings of the Symposium on Simulation for Architecture and Urban Design, San Diego, CA, USA, The Society for Modeling and Simulation International, In: SimAUD 2017, Toronto, ONT, Canada, 22.05.2017 - 24.05.2017, ISBN 978-1-5108-7018-5,
DOI: 10.22360/simaud.2017.simaud.027,
[Online-Edition: https://dl.acm.org/citation.cfm?id=3289814],
[Conference or Workshop Item]

Witte, Dennis de and de Klijn-Chevalerias, M. L. and Loonen, R. C. G. M. (2017):
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design and Engineering, TU Delft Open, pp. 107-117, (5), ISSN 2213-3038,
DOI: 10.7480/jfde.2017.1,
[Online-Edition: https://journals.open.tudelft.nl/index.php/jfde/article/view...],
[Article]

Auer, Thomas and Knaack, Ulrich and Schneider, Jens (2017):
Proceedings of the PowerSkin Conference: January 19th 2017, Munich.
In: Powerskin Conference, München, DOI: 518-3-161-1-10-20170620,
[Book Section]

Hoces, A.I. Prieto and Knaack, Ulrich and Auer, Thomas and Klein, Tillmann (2017):
Solar façades: Main barriers for widespread façade integration of solar technologies.
In: PowerSkin Conference - Munich, Germany, München, 19.01.2017, [Conference or Workshop Item]

de Witte, Dennis and de Klijn-Chevalerias, M. L. (2017):
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
In: PowerSkin Conference - Munich, Germany, München, 19.01.2017, [Conference or Workshop Item]

Conci, Mira and Schneider, Jens (2017):
A District Approach to Building Renovation for the Integral Energy Redevelopment of Existing Residential Areas.
In: Sustainability, MDPI, pp. 747-759, 9, (5), ISSN 2071-1050,
[Online-Edition: http://doi.org/10.3390/su9050747],
[Article]

Maier, Andreas (2017):
Die ETA-Fabrik: Ein Industriegebäude als Teil der Prozesskette.
In: Future Factory Design Symposium, Technische Universität München, Fakultät für Architektur, Professur für Entwerfen und Gebäudehülle, 09. März 2017, [Conference or Workshop Item]

Maier, Andreas and Schneider, Jens and Wien, A. and Stephan, J. (2017):
Ein Gebäude als Maschine für Maschinen im Gebäude.
In: Deutsche BauZeitschrift DBZ, Gütersloh: Bauverlag BV GmbH, pp. 58-67, 65, (1), [Article]

de Witte, Dennis and de Klijn-Chevalerias, M. L. and Loonen, R. C. G. M. and Hensen, J. L. M. and Knaack, Ulrich and Zimmermann, G. (2017):
Convective Concrete - Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design and Engineering, vol. 5, no. 1, 2017, pp. 107-117, [Article]

Schuster, Miriam and Kuntsche, Johannes K. and Schneider, Jens (2017):
Investigation of the viscoelastic material behaviour of laminated safety glass interlayers.
In: 91. Glastechnische Tagung, Weimar, [Conference or Workshop Item]

Alter, Christian and Kolling, Stefan and Schneider, Jens (2017):
An enhanced non–local failure criterion for laminated glass under low velocity impact.
In: International Journal of Impact Engineering, pp. 342-353, (109), [Article]

Rühl, Andreas and Kolling, Stefan and Schneider, Jens (2017):
Characterization and modelling of poly(methyl methacrylate) and thermoplastic polyurethane for the application in laminated setups.
In: Mechanics of Materials, pp. 102-111, (113), [Article]

Prieto Hoces, A.I. and Knaack, Ulrich and Klein, Tillmann and Auer, Thomas (2017):
25 Years of cooling research in office buildings: Review for the integration of cooling strategies into the building façade (1990–2014).
In: Renewable & Sustainable Energy Reviews, pp. 89-102, 71, DOI: 10.1016/j.rser.2017.01.012,
[Article]

Knaack, Ulrich and Mohsen, Alamir and De Witte, Dennis (2017):
Concepts and samples for force and function optimisation of steel knots and ceramic wall components.
In: Deutscher Verband fur Materialforschung und – prüfung, [Conference or Workshop Item]

Kamerling, Wim and Veer, Fred and Schnater, Frank and Knaack, Ulrich (2017):
Bouwsysteem Cellenbeton-Nobel: Verslag proeven trek/schuif/wringing.
Delft University of Technology, [Report]

Borg Costanzi, Chris and Ahmed, Z. Y. and Schipper, H. R. and Bos, F. P. and Knaack, Ulrich and Wolfs, R. J. M.
Bögle, Annette and Grohmann, Manfred (eds.) (2017):
3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure.
In: Proceedings of the IASS Annual Symposium 2017, Hamburg, Germany, 25.-28.09.2017, [Conference or Workshop Item]

Knaack, Ulrich and Michel, M. (2017):
Adaptive structural Material for Reconfigurable Freeform Surfaces.
In: Proceedings of the IASS Annual Symposium 2017, 25 Sep 2017-28 Sep 2017, [Conference or Workshop Item]

Knaack, Ulrich (2017):
Bauen mit Glas: Gebäudehülle - quo vadis?
In: XIA Intelligente Architektur, pp. 90-91, 07-09/17, (100), [Article]

De Witte, Dennis and de Klijn-Chevalerias, M. L. and Loonen, R. C. G. M. and Hensen, J. L. M. and Knaack, Ulrich and Zimmermann, G. (2017):
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design & Engineering, TU Delft Open, pp. 107-117, 5, (1), ISSN 2213-3038,
DOI: 10.7480/jfde.2017.1.1430,
[Article]

Prieto Hoces, A.I. and Klein, Tillmann and Knaack, Ulrich and Auer, Thomas (2017):
Main perceived barriers for the development of building service integrated facades: Results from an exploratory expert survey.
In: Journal of building engineering, pp. 96-106, 13, DOI: 10.1016/j.jobe.2017.07.008,
[Article]

Kultur, Sinem and Knaack, Ulrich and Türkeri, N. (2017):
Performance check tool for facade design.
In: ICBEST Istanbul: International Conference on Building Envelope Systems and Technologies, [Conference or Workshop Item]

Hoces, Alejandro Prieto and Knaack, Ulrich and Auer, Thomas and Klein, Tillmann (2017):
Solar coolfacades: Framework for the integration of solar cooling technologies in the building envelope.
In: Energy, pp. 353-368, 137, DOI: 10.1016/j.energy.2017.04.141,
[Article]

Hoces, Alejandro Prieto and Knaack, Ulrich and Auer, Thomas and Klein, Tillmann (2017):
Solar façades: Main barriers for widespread façade integration of solar technologies.
In: Journal of Facade Design & Engineering, IOS Press, pp. 51-62, 5, (1), ISSN 2213-3038,
DOI: 10.7480/jfde.2017.1.1398,
[Article]

Knaack, Ulrich and Klein, Tillmann and Konstantinou, Thaleia (2017):
The Future Envelope #11: Next Business.
In: The Future Envelope #11: Next Business, [Book Section]

Knaack, Ulrich (2017):
The Total Envelope.
In: Diesseits der Form Architektur auf dem Weg zur Energiewende - xia Intelligente Architektur, 100 Beiträge aus 100 Ausgaben, 1994 - 2017, Verlagsanstalt Alexander Koch GmbH, pp. 198-207, [Book Section]

Krimm, Jochen and Knaack, Ulrich and Techen, Holger (2017):
Updated urban facade design for quieter outdoor spaces.
In: Journal of Facade Design and Engineering, pp. 63-75, 5, (1), DOI: 10.7480/jfde.2017.1.1422,
[Article]

Kwon, M. and Remoy, H. T. and van den Dobbelsteen, A. A. J. F. and Knaack, Ulrich (2017):
User-focused design factors of workspace for nearly zero energy office renovation: findings from literature review.
In: Reviewed papers of the 24th Annual Conference of the European Real Estate Society (ERES 2017), In: ERES 2017: 24th Annual Conference of the European Real Estate Society, TU Delft, Delft, Netherlands, 28 Jun 2017 → 1 Jul 2017, DOI: https://pure.tudelft.nl/portal/files/30171194/User_focused_design_factors_of_workspace_for_nearly_zero_ERES_FullPaper_3.pdf,
[Online-Edition: http://2017.eres.tudelft.nl/index.html],
[Conference or Workshop Item]

Kwon, M. and Remoy, H. T. and van den Dobbelsteen, A. A. J. F. and Knaack, Ulrich (2017):
User-focused design measurement factors of workspace for nearly zero energy office renovation: findings from literature review.
In: ERES 2017: 24th Annual Conference of the European Real Estate Society, [Conference or Workshop Item]

Schneider, Jens and Neugebauer, Jürgen and Schuster, Miriam and Peters, Timon (2017):
Cold-bent thin glass laminates for architectural applications: Computational design and material modeling.
In: IASS, Hamburg, [Conference or Workshop Item]

Drass, Michael and Schuster, Miriam and Schneider, Jens (2017):
Comparison of unconventional testing methods for mechanical characterization of polymeric materials in modern glass structures.
In: IABSE Symposium, Vancouver, [Conference or Workshop Item]

Schuster, Miriam and Kraus, Michael (2017):
Testing, rheological modelling and design of interlayer materials in laminated safety glass.
In: Workshop at Glass Performance Days, Tampere, [Conference or Workshop Item]

Kraus, Michael and Schuster, Miriam and Kuntsche, Johannes K. and Siebert, Geralt and Schneider, Jens (2017):
Parameter identification methods for visco and hyperelastic material models.
In: Glass Performance Days, Tampere, [Conference or Workshop Item]

Ensslen, Frank and Müller-Braun, Steffen (2017):
Kantenfestigkeit von Floatglas in Abhängigkeit von wesentlichen Schneidprozessparametern.
In: Glasbau, Ernst & Sohn, Berlin, pp. 219-232, 2017, [Article]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2017):
Novel volumetric Helmholtz free energy function accounting for isotropic cavitation at finite strains.
In: Materials & Design, Elsevier, pp. 71-89, 2017, ISSN 0264-1275,
DOI: 10.1016/j.matdes.2017.10.059,
[Article]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2017):
Adhesive connections in glass structures—part II: material parameter identification on thin structural silicone.
In: Glass Structures & Engineering, Springer-Verlag, pp. 1-18, ISSN 2363-5142,
DOI: 10.1007/s40940-017-0048-3,
[Online-Edition: https://link.springer.com/article/10.1007/s40940-017-0048-3],
[Article]

Ensslen, Frank and Müller-Braun, Steffen (2017):
Kantenfestigkeit von Floatglas in Abhängigkeit von wesentlichen Schneidprozessparametern.
In: Glasbau 2017, Berlin, Ernst & Sohn, pp. 219-232, [Book Section]

Müller-Braun, Steffen and Schneider, Jens (2017):
Biaxially curved glass with large radii - determination of strength using the coaxial double ring test.
In: Glass Structures & Engineering, pp. 121-131, 2, (2), ISSN 2363-5142,
DOI: 10.1007/s40940-017-0050-9,
[Online-Edition: https://doi.org/10.1007/s40940-017-0050-9],
[Article]

2016

Becker, Matthias and Traiser, Birgit and Schill, Florian and Schneider, Jens and Firus, Andrei
Baeßler, Matthias and Möller, Gerd and Rogge, Andreas and Schiefelbein, Norbert (eds.) (2016):
Messung und Identifikation dynamischer Strukturparameter mittels terrestrischer Mikrowelleninterferometrie.
In: Messen im Bauwesen 2016: Erhalt der Bauwerke unserer Verkehrs-Infrastruktur., Berlin, [Book Section]

Firus, Andrei and Schneider, Jens and Becker, Matthias and Grunert, Günther and Pullamthara, Jiny Jose (2016):
Dynamische Verformungsmessungen an Eisenbahnbrücken mittels Mikrowelleninterferometrie. Teil 1: Messverfahren.
In: Bautechnik 93, Ernst&Sohn, pp. 700-710, (10), [Online-Edition: http://onlinelibrary.wiley.com/doi/10.1002/bate.201600050/ab...],
[Article]

Thiele, Christian-Dominik (2016):
Festigkeitsermittlung thermisch verformter Gläser am Doppelring-Biegeversuch.
TU Darmstadt, [Master Thesis]

Krimm, Jochen and Techen, Holger and Knaack, Ulrich (2016):
Tuning acoustical facade designs aiming for a controlled influence on the urban soundscape.
In: 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, Hamburg, Germany, 21/08/16 → 24/08/16, [Online-Edition: http://pub.dega-akustik.de/IN2016/data/index.html],
[Conference or Workshop Item]

Hoces, Alejandro Prieto and Knaack, Ulrich and Auer, Thomas and Klein, Tillmann (2016):
Coolfacade: Design driven categorisation of solar cooling technologies for facade integration possibilities.
In: 15th International Conference on Sustainable Energy Technologies – SET 2016 - NUS - National University of Singapore, Singapore, Singapore, 19 Jul 2016 → 22 Jul 2016, [Conference or Workshop Item]

Henriksen, Thomas and Lo, Stephen and Knaack, Ulrich (2016):
A new method to advance complex geometry thin-walled glass fibre reinforced concrete elements.
In: Journal of building engineering, pp. 243-251, 6, DOI: 10.1016/j.jobe.2016.04.002,
[Article]

Prieto Hoces, A.I. and Klein, Tillmann and Knaack, Ulrich (2016):
Facade integration: Survey-based assessment of the main problems for the integration of building services in facade systems.
In: Proceedings of the ID@50 Integrated Design Conference 2016, 26 June – 1 July 2016, Bath, UK, In: Integrated Design Conference ID@50, Bath, United Kingdom, 29 Jun 2016 → 1 Jul 2016, [Conference or Workshop Item]

Schneider, Jens and Schula, Sebastian (2016):
Simulating soft body impact on glass structures.
In: ICE Journal Structures and Buildings, Special Issue on Glass Structures, pp. 416-431, 169, (6), [Online-Edition: https://doi.org/10.1680/jstbu.13.00112],
[Article]

Maier, Andreas and Kleuderlein, Jonas and Schneider, Jens (2016):
Einfluss von Bauwerksverformungen auf Fassadenkonstruktionen aus Glas am Beispiel der ETA-Fabrik.
In: Glasbau 2016, Ernst&Sohn, pp. 207-218, 1, (S1), [Online-Edition: http://onlinelibrary.wiley.com/doi/10.1002/stab.v85.3s/issue...],
[Article]

Werkle, Horst and Firus, Andrei and Francke, Wolfgang (2016):
Einfluss personeninduzierter Schwingungen auf die Messgenauigkeit von Kraftmessplatten in Ganglaboren.
In: Bauingenieur, Springer, pp. 110-119, 91, ISSN 0005-6650,
[Article]

Knaack, Ulrich (2016):
Journal of Façade Design and Engineering” Volume 4; Number 1-2,.
Amsterdam, IOS Press, ISSN 2213-3038,
[Journal]

Drass, Michael and Schneider, Jens and Kelleter, Christian and Sobek, Werner and Haase, Walter (2016):
Aspekte experimenteller und numerischer Untersuchungen von Klemmhalterungen im Glasbau.
In: Glasbau 2016, Dresden, pp. 183-195, [Online-Edition: http://onlinelibrary.wiley.com/doi/10.1002/stab.201690157/fu...],
[Book Section]

Franz, Johannes (2016):
Untersuchungen zur Resttragfähigkeit von gebrochenen Verglasungen : Investigation of the residual load-bearing behaviour of fractured glazing.
Berlin, Springer, TU Darmstadt, In: Mechanik, Werkstoffe und Konstruktion im Bauwesen ; 45, ISBN 978-3-662-48555-2,
[Ph.D. Thesis]

Knaack, Ulrich (2016):
Innovative façade technology using masonry – Solid construction 2.0, Innovative Fassadentechnik mit Mauerwerk – massiv construction 2.0.
In: Mauerwerk European Journal of Masonry, pp. 9-15, 1, (20), ISSN ISSN 1432-3427, A 43238,
[Article]

Schneider, Jens and Aronen, A. and Hilcken, J. and NIelsen, J. and Karvinen, R. and Olesen, J.F. (2016):
Stress relaxation in tempered glass caused by heat soak testing.
In: Engineering Structures, Elsevier, pp. 42-49, (122), ISSN 0141-0296,
DOI: 10.1016/j.engstruct.2016.04.024.,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0141029616...],
[Article]

Henriksen, Thomas and Knaack, Ulrich and Lo, Stephen (2016):
Innovative Complex Geometry GFRC “Thin-walled concrete panels for future building envelopes.
In: Facade Tectonics 2016 World Congress, Los Angeles USA, October 10-11, 2016, [Conference or Workshop Item]

Knaack, Ulrich and Tessmann, Oliver (2016):
BE-AM Build Envirnment Additive Manufacturing.
In: BE-AM, TU Darmstadt, 27.10.2016, [Conference or Workshop Item]

Knaack, Ulrich (2016):
RAM Real Additive Manufacturing.
In: @TUD – Bouwkunde, 4TU.Bouw, Delft, Niederlande, 21.10.2016, [Conference or Workshop Item]

Knaack, Ulrich (2016):
Facade Roadmap.
In: 3. Simposio de Arquitectura y Energía, Santiago de Chile, Chile, 05.11.-12.11.2016, [Conference or Workshop Item]

Knaack, Ulrich and Schneider, Jens (2016):
Vom Material zum Produkt: Beispiele aus dem Bauwesen.
In: Kick-off-Workshop Profilbereich vom Material zur Produktinnovation, TU Darmstadt, 01.06.2016, [Conference or Workshop Item]

Schneider, Jens and Kuntsche, Johannes K. and Schuster, Miriam (2016):
Mechanisches Verhalten von polymeren Zwischenschichten in Verbundglas.
In: Glas im konstruktiven Ingenieurbau 14, Hochschule München – Fakultät für Bauingenieurwesen, Verein der Freunde des Stahlbaus an der Hochschule München e.V., 03.03.-04.03.2016, [Online-Edition: http://129.187.85.21:8080/lsl/tagungen],
[Conference or Workshop Item]

Knaack, Ulrich (2016):
Innovative Fassadentechnik mit Mauerwerk – massiv construction 2.0.
In: Mauerwerk European Journal of Masonry, pp. 9-15, 1, (20), ISSN 1432-3427,
[Article]

Conci, Mira (2016):
Towards a sustainable future.
In: RuMoer, 62, ISSN 1567-7699,
[Online-Edition: https://issuu.com/rumoer/docs/rumoer_62-sustainability],
[Article]

Pelfrene, Joren and Kuntsche, Johannes K. and Van Dam, Sam and Van Paepegem, Wim and Schneider, Jens (2016):
Critical assessment of the post-breakage performance of blast loaded laminated glazing: Experiments and simulations.
In: International Journal of Impact Engineering, pp. 61-71, 88, [Online-Edition: http://www.sciencedirect.com/science/article/pii/S0734743X15...],
[Article]

Henriksen, Thomas and Lo, Stephen and Knaack, Ulrich (2016):
The impact of a new mould system as part of a novel manufacturing process for complex geometry thin-walled GFRC.
In: Architectural Engineering and Design Management, Taylor & Francis, pp. 231-249, 12, (3), [Online-Edition: http://tandfonline.com/doi/full/10.1080/17452007.2016.115954...],
[Article]

Maier, Andreas and Schneider, Jens and Knaack, Ulrich and Beck, Martin (2016):
ETA-Fabrik – Ein Industriegebäude als Teil der Prozesskette.
In: Xia intelligente architektur, Verlagsanstalt Alexander Koch GmbH, pp. 72-75, 96, [Online-Edition: http://www.xia-online.de/fileadmin/user_upload/images/XIA/Ki...],
[Article]

Strauß, Holger and Knaack, Ulrich (2016):
Additive manufacturing for Future Facades: The potential of 3D printed parts for the building envelope.
In: Journal of Facade Design and Engineering, IOS Press, 3, (3-4), [Article]

Maier, Andreas and Schneider, Jens and Knaack, Ulrich (2016):
ETA-Fabrik- Ein Industriegebäude als Teil der Prozesskette.
In: Xia intelligente Architektur 07-09/16, Zeitschrift für Architektur und Technik, 9689, ISSN 0949-2356,
[Article]

Knaack, Ulrich and Tessmann, Oliver and Bilow, Marcel and de Witte, Dennis and Mohsen, Alamir (2016):
Imagine 10 – Rapids 02.
Rotterdam, Nai010 Publ, ISBN 9462082936,
[Online-Edition: http://www.nai010.com/en/component/zoo/item/imagine-10-rapid...],
[Book]

Becker, Matthias and Traiser, Birgit and Pullamthara, Jiny Jose and Schill, Florian and Schneider, Jens and Firus, Andrei (2016):
Messung und Identifikation dynamischer Strukturparameter mittels terrestrischer Mikrowelleninterferometrie.
In: Tagung „Messsen im Bauwesen 2016: Erhalt der Bauwerke unserer Verkehrs-Infrastruktur“, Bundesanstalt für Materialforschung und- prüfung, Berlin, 08.11.2016, [Conference or Workshop Item]

de Witte, Dennis and Knaack, Ulrich (2016):
„RAM“ Material Xperience.
In: 3 TU.Bouw center of excellence for the built environment, Rotterdam, 29.01.2016, [Conference or Workshop Item]

Conci, Mira and Schneider, Jens (2016):
SWIVT as a case-study on energy management platforms supporting design, planning and operation of smart districts.
In: 9th International Conference on Improving Energy Efficiency in Commercial Buildings and Smart Communities, Frankfurt am Main, 16.-18.03.2016, [Conference or Workshop Item]

Drass, Michael and Schneider, Jens (2016):
Constitutive Modeling of Transparent Structural Silicone Adhesive–TSSA.
In: 14. Darmstädter Kunststofftag, Hochschule Darmstadt (h _ da) Institut für Kunststofftechnik Darmstadt (ikd) Darmstadt, 24.06.2016, [Conference or Workshop Item]

Bewersdorff, David and Müller, N. and Pfnür, A. and Simsch, G. (2016):
Entwicklung Systemischer Instrumente zur Nachhaltigkeitsbewertung energetischer Gebäudesanierungen.
In: 1. Tag der Interdisziplinarität, Fif TU Darmstadt, 28.1.2016, [Conference or Workshop Item]

Drass, Michael and Schneider, Jens (2016):
On the mechanical behavior of transparent structural silicone adhesive – TSSA.
In: SEMC 2016, Capetown, South Africa, [Conference or Workshop Item]

Firus, Andrei and Schneider, Jens and Becker, Matthias and Pullamthara, Jiny Jose (2016):
Validation of microwave interferometry measurements for applications in railway bridge dynamics.
In: German-Japanese Bridge Symposium GJBS 2016, Osaka, Japan, 30.-31.08.2016, [Conference or Workshop Item]

Pourmoghaddam, Navid and Nielsen, Jens and Schneider, Jens (2016):
Numerical simulation of residual stresses at holes near edges and corners in tempered glass: A parametric study.
Ernst&Sohn, ISSN 978-3-433-03187-2,
[Conference or Workshop Item]

Becker, Matthias and Traiser, Birgit and Pullamthara, Jiny Jose and Schill, Florian and Schneider, Jens and Firus, Andrei (2016):
Messung und Identifikation dynamischer Strukturparameter mittels terrestrischer Mikrowelleninterferometrie.
In: Messen im Bauwesen 2016: Erhalt der Bauwerke unserer Verkehrs-Infrastruktur, Bundesanstalt für Materialforschung und -prüfung, Berlin, 08.11.2016, [Conference or Workshop Item]

Franz, Johannes and Schneider, Jens and Maier, Andreas (2016):
Insulating glazing with integrated functions – case study of the ETA-factory.
In: Glass in Architecture and Structural Engineering, Ernst&Sohn, pp. 53-61, [Online-Edition: http://eu.wiley.com/WileyCDA/WileyTitle/productCd-3433031878...],
[Book Section]

Maier, Andreas (2016):
Die energieeffiziente Fabrik: Planung und Bau der ETA-Fabrik.
In: ISOLAR Symposium 2016, TU Darmstadt, 25.02.2016, [Conference or Workshop Item]

Pourmoghaddam, Navid and Nielsen, J. H. and Schneider, Jens (2016):
Numerical simulation of residual stresses at holes near edges and corners in tempered glass: A parametric study.
In: Engineered Transparency 2016. Glass in Architecture and Structural Engineering, Ernst&Sohn, pp. 513-525, [Article]

Maier, Andreas (2016):
Energieeffizienz im Industriebau – Ein Demonstrator an der TU Darmstadt N.
In: Gastvorlesung an der TH Nürnberg im Rahmen des Masterstudiengangs Internationales Bauwesen – Energie und Umwelt – Ressourcenschonendes Bauen, Nürnberg, 02.06.2016, [Conference or Workshop Item]

Schneider, Jens and Kuntsche, Johannes K. and Schula, Sebastian and Schneider, Frank and Wörner, Johann-Dietrich (2016):
Glasbau - Grundlagen, Berechnung, Konstruktion.
Berlin, Springer, In: Mechanik, Werkstoffe und Konstruktionen im Bauwesen, 2, ISBN 3540689273, 9783540689270,
[Online-Edition: https://springer.com],
[Book]

Drass, Michael and Schneider, Jens (2016):
Constitutive Modeling of Transparent Structural Silicone Adhesive – TSS.
In: 14. Darmstädter Kunststofftag, Darmstadt, [Conference or Workshop Item]

Henriksen, Thomas and Lo, S. and Knaack, Ulrich (2016):
The impact of a new mould system as part of a novel manufacturing process for complex geometry thin-walled GFRC.
In: Architectural Engineering and Design Management, pp. 231-249, 12, (3), DOI: 10.1080/17452007.2016.1159540,
[Article]

Knaack, Ulrich and Pottgiesser, Uta and Böke, Jens (2016):
Imagine 09 Prototyping efn mobile.
Rotterdam, nai010 publishers, In: Imagine, ISBN 978-9462082915,
[Book]

Maier, Andreas and Schneider, Jens and Knaack, Ulrich (2016):
ETA Fabrik ein Industriegebäude als Teil einer Prozesskette.
In: Intelligente Architektur / AIT Spezial Ausgabe 9689, ISSN 0949-2356,
[Article]

Hickert, S. and Knaack, Ulrich (2016):
Evaluation of free-form concrete architecture, moulding systems and their technical potentials.
IOS Press, DOI: 103233/FDE-160045,
[Book]

Knaack, Ulrich and Pottgiesser, U. and Böke, J.
Knaack, Ulrich and Klein, T. and Bilow, M. (eds.) (2016):
Imagine 09 – Prototyping efn Mobile.
Rotterdam, Publisher 010, [Book]

Knaack, Ulrich and de Witte, Dennis (2016):
Real Additive Manufacturing.
In: 3TU.Bouw center of excellence for the built environment, pp. o.A., [Article]

Henriksen, T. and Lo, S. and Knaack, Ulrich and Kirkeggard, P.H. (2016):
Developing and testing a novel manufacturing method for complex geometry GFRC panels by fabricating a 10m high, self-supporting hyperbolic shell.
In: COST_2016_45, [Article]

Knaack, Ulrich and Schneider, Jens (2016):
Institut für Statik und Konstruktion.
In: Bau- und Umweltingenieurwissenschaften, Information zu Lehre, Forschung und Entwicklung am Fachbereich 13, pp. 94-97, [Article]

Firus, Andrei and Schneider, Jens and Francke, Wolfgang and Kunkel, B. (2016):
TU Darmstadt HUMVIB-Bridge: Investigation of the human-structure interaction on a full-scale experimental pedestrian bridge.
In: Proceedings of the International Scientific Conference CIBv, Brasov, THE TRANSILVANIA UNIVERSITY OF BRASOV, Brasov, Romania, 28-29 October 2016, In: BULLETIN OF THE TRANSILVANIA UNIVERSITY OF BRASOV VOL. 9(58), special issue 1-Series 1, [Conference or Workshop Item]

De Witte, Dennis and Knaack, Ulrich and Mohsen, Alamir and Tessmann, Oliver and Bilow, Marcel
Knaack, Ulrich and Klein, Tillmann and Bilow, Marcel (eds.) (2016):
Rapids 2.0.
Rotterdam, nai010 uitgevers, In: Imagine, 10, ISBN 9789462082939,
[Book]

2015

Henriksen, Thomas and Lo, Stephen and Knaack, Ulrich (2015):
An innovative approach to manufacture thin-walled glass fibre reinforced concrete for tomorrow's architectural buildings envelopes with complex geometries.
In: Journal of building engineering, Elsevier Ltd., pp. 188-199, (4), [Online-Edition: http://www.sciencedirect.com/science/article/pii/S2352710215...],
[Article]

Knaack, Ulrich and Henriksen, T. and Lo, S. (2015):
Advances in the application of thin-walled GFRC elements.
In: Advances in Civil Engineering Materials, ASTM International, pp. 114-130, 4, (1), DOI: 10.1520/ACEM20140045,
[Article]

Knaack, Ulrich (2015):
Check-up digital craftman-ship?
In: Fassadentechnik: Planung und Ausf�hrung der Geb�udeh�lle, pp. 24-26, 21, (4), ISSN 0948-1214,
[Article]

Knaack, Ulrich (2015):
Check-up: Ready-to-fix the future?
In: Fassadentechnik: Planung und Ausführung der Gebäudehülle, pp. 24-29, 21, (1), ISSN 0948-1214,
[Article]

Knaack, Ulrich and Hickert, S. and Hildebrand, L.
Knaack, Ulrich and Klein, T. and Bilow, M. (eds.) (2015):
Imagine 08 – Concretable.
Rotterdam, Publisher 010, [Book]

Knaack, Ulrich (2015):
Check up: Digital craftmanschip.
In: Fassadentechnik, pp. 24-27, 21, (4), [Article]

Knaack, Ulrich (2015):
Check up: Digital craftmanschip.
In: Fassadentechnik, pp. 24-27, 21, (4), [Article]

Knaack, Ulrich and Klein, T. and Konstantinou, T. and Prieto Hoces, A. (2015):
The Future Envelope - Unobtainium- conference proceedings.
Delft, Delft University of Technology, [Book]

Schula, Sebastian (2015):
Charakterisierung der Kratzanfälligkeit von Gläsern im Bauwesen = Characterisation of the scratch sensitivity of glasses in civil engineering.
Berlin, Springer, TU Darmstadt, In: Mechanik, Werkstoffe und Konstruktion im Bauwesen ; 43, ISBN 978-3-662-47781-6,
[Ph.D. Thesis]

Kuntsche, Johannes K. and Schneider, Jens and Schuster, Miriam and Langer, S. (2015):
Viscoelastic properties of laminated glass interlayers – theory and experiments.
In: Glass Performance Days 2015, Tampere, Finland, 23.-26.06.2015, [Online-Edition: http://www.glassonline.com/site/news/topic/Events/id/24759/G...],
[Conference or Workshop Item]

Knaack, Ulrich and Henriksen, Thomas and Lo, Stephen (2015):
Advances in the application ofthin-walled glas fiber reinforced concrete elements.
In: Advances in Civil Engineering Materials, pp. 115-130, 4, (1), ISSN 2165-3984,
[Online-Edition: https://doi.org/10.1520/ACEM20140045],
[Article]

Knaack, Ulrich (2015):
Check up: Ready-to-fix the future?
In: Fassadentechnik, Cubus Medien Verlag GmbH, pp. 24-29, 21, (1), [Article]

Knaack, Ulrich (2015):
Check up: Digital craftmanship.
In: fassaden technik, Cubus Medien Verlag GmbH, pp. 24-27, 4, ISSN 0948-1214,
[Online-Edition: http://www.fassadentechnik.de/downloads/home/Vorab_4_2015.pd...],
[Article]

Knaack, Ulrich and Klein, Tillmann (2015):
Adaptive building envelopes, component development as well as implementation strategies.
In: Journal of Facade Design & Engineering, IOS Press, 3, (2), ISSN 2213-3038,
[Online-Edition: http://dx.doi.org/10.7480/jfde.2015.2],
[Article]

Knaack, Ulrich and Bilow, Marcel (2015):
Fassaden aus dem Drucker?
In: Glaswelt: Glas, Fenster, Fassade, pp. 46-48, 10, [Online-Edition: https://www.glaswelt.de/GLASWELT-2015-10/Fassaden-aus-dem-Dr...],
[Article]

Techen, Holger and Knaack, Ulrich and Krimm, Jochen (2015):
Hochhausfassaden und akustische Stadtraumgestaltung.
In: Zeitschrift für Akustik, Schallschtutz und Schwingungstechnik, Springer VDI, pp. 117-125, (3), [Online-Edition: http://www.laermbekaempfung.de/laerm/article.php?data[articl...],
[Article]

Kuntsche, Johannes K. (2015):
Mechanisches Verhalten von Verbundglas unter zeitabhängiger Belastung und Explosionsbeanspruchung.
Berlin, Springer, TU Darmstadt Institut für Statik und Konstruktion, In: Mechanik, Werkstoffe und Konstruktionen im Bauwesen, 46, ISBN 9783662488300,
[Ph.D. Thesis]

Kuntsche, Johannes K. and Franz, Johannes and Schneider, Jens (2015):
Untersuchungen zum Resttragverhalten von Verbundglas.
In: Glasbau 2015, Berlin, Ernst&Sohn, pp. 383-395, [Book Section]

Knaack, Ulrich and Hickert, Sascha and Hildebrand, Linda (2015):
Concretable (Imagine 08).
Rotterdam, Nai010 Publ, ISBN 978-94-6208-221-2,
[Book]

de Witte, Dennis (2015):
Concrete in an AM process: Freeform concrete processing.
Delft, TU Delft, [Online-Edition: http://resolver.tudelft.nl/uuid:059aef3b-a2ad-4c16-8807-40c7...],
[Master Thesis]

Langner, Normen and Bewersdorff, David (2015):
Thermal and Acoustical Simulation of Open Space Working Areas with Thremally Activated Building Systems (TABS).
In: 3rd Annual International Conference on Architecture and Engineering ACE 2015, Singapore, 13.-14.04.2015, [Conference or Workshop Item]

Langner, Normen and Bewersdorff, David (2015):
Thermal and acoustical simulation of open space working Areas in commercial Buildings equipped with thremally activated Builduing systems.
In: 14th Conference of International Building Performance Simulation Association, Hyderabad, India, 7.-9. Dezember 2015, [Conference or Workshop Item]

Firus, Andrei and Kramer, A. and Werkle, Horst and Francke, Wolfgang (2015):
Schwingungsantwort einer Decke infolge von vertikalen beidbeinigen Sprüngen in der Sprungkraftdiagnostik.
In: VDI Berichte 2244, In: 5. VDI-Fachtagung Baudynamik, Kassel, [Conference or Workshop Item]

Werkle, Horst and Francke, Wolfgang and Firus, Andrei (2015):
Influence of human induced floor vibrations on the measurement precision of a force plate in a biomechanics laboratory.
In: Compdyn 2015, In: 5th ECCOMA thermatic conference on computational methods in structural dynamics and earthquake engineering, Crete Island, Greece, 25.-27.05.2015, [Conference or Workshop Item]

Hilcken, Jonas (2015):
Zyklische Ermüdung von thermisch entspanntem und thermisch vorgespannten Kalk-Natron-Silikatglas.
Darmstadt, Springer, TU Darmstadt, In: Mechanik, Werkstoffe und Konstruktionen im Bauwesen, 44, ISBN 978-3-662-48352-7,
[Online-Edition: http://10.1007/978-3-662-48353-4],
[Ph.D. Thesis]

Henriksen, T.N. and Knaack, Ulrich (2015):
Advancing the architectural application of complex geometry GFRC.
In: Papers of the 17th international congress of the GRCA, Camberley, International Glassfibre Reinforced Concrete Association (GRCA), pp. 1-10, [Book Section]

Schneider, Jens and Becker, Matthias and Drass, Michael and Pullamthara, Jiny Jose (2015):
Strukturanalyse, Messung und Modellierung mit terrestrischem Radar und inversem Finite-Element Ansatz.
[Data]

Knaack, Ulrich and Luible, A. and Overend, Mauro and Aelenei, Laura and Perino, M. and Wellershoff, Frank and Brzezicki, M. (2015):
Adaptive facade network Europe.
Delft, TU Delft Open, ISBN 978-94-6186-581-6,
[Book]

Karagianni, L. and Turrin, Michela and Knaack, Ulrich and Hordijk, G.J. (2015):
Additive manufacturing for daylight_Towards a customized shading device.
unknown, [Other]

Henriksen, T.N. and Lo, S. and Knaack, Ulrich (2015):
An innovative approach to manufacture thin-walled glass fibre reinforced concrete for tomorrow’s architectural buildings envelopes with complex geometries.
In: Journal of Building Engineering, pp. 189-199, 4, DOI: 10.1016/j.jobe.2015.09.006,
[Article]

Henriksen, Thomas and Knaack, Ulrich and Lo, Stephen (2015):
“Advancing moulding techniques for the manufacture of thin-walled GFRC for Complex geometry architectural buildings.
In: Elsevier Editorial System ™ for Construction & Building Materials, [Article]

Knaack, Ulrich (2015):
Journal of Façade Design and Engineering, Volume 3; Number 1,.
Amsterdam, IOS Press, ISSN 2213-3038/15,
[Journal]

Knaack, Ulrich (2015):
Journal of Façade Design and Engineering, Volume 3; Number 2.
Amsterdam, IOS Press, ISSN 2213-3038/15,
[Journal]

Knaack, Ulrich (2015):
Journal of Façade Design and Engineering, Volume 3; Number 3-4.
Amsterdam, IOS Press, ISSN 2213-3038/15,
[Journal]

Luible, A. and Overend, M. and Aelenei, L. and Knaack, Ulrich and Perino, M. and Wellershoff, F. (2015):
Adaptive façade network – Europe.
Tu Delft, In: Cost Action TU 1403 adaptive façade network, ISBN 978-94-6186-581-6,
[Book]

Henriksen, T. and Lo, S. and Knaack, Ulrich (2015):
Advancing moulding techniques for the manufacture of thin-walled GFRC for Complex geometry architectural buildings.
In: Elsevier Editorial System ™ for Construction & Building Materials, [Article]

Henriksen, T. and Lo, S. and Knaack, Ulrich (2015):
Complex Geometry GFRC in Architectural Applications.
In: GRC Conference Dubai, [Article]

Knaack, Ulrich (2015):
Check up: Ready-to-fix the future?, 21(1), 24-29.
In: Fassadentechnik, pp. 24-29, 21, (1), [Article]

Karagianni, L. and Turrin, Michela and Knaack, Ulrich and Hordijk, Truus (2015):
Additive manufacturing for daylight - towards a customized shading device.
Darmstadt, GJ, TU Delft, In: Student theses, [Master Thesis]

2014

Knaack, Ulrich (2014):
Kurzporträt "Die Neuen": Ulrich Knaack.
In: hoch3. Die Zeitung der TU Darmstadt, Technische Univ. Darmstadt, p. 20, (5), ISSN 1861-7204,
[Article]

Meißner, Simon (2014):
Numerische Studien zum in-situ Setzungsverhalten von Gründungssystemen unter zyklischer Einwirkung in nichtbindigen Böden.
Darmstadt, TU Darmstadt, In: Mitteilungen des Instituts für Werkstoffe und Mechanik im Bauwesen der Technischen Universität Darmstadt, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/4051],
[Ph.D. Thesis]

Knaack, Ulrich (2014):
De perfecte gevel bestaat niet.
In: Bouwformatie, pp. 20-23, (3), [Article]

Knaack, Ulrich (2014):
Fassadenelemente.
In: Beton, Verlag Bau + Technik GmbH, p. 112, 64, (4), ISSN 0005-9846,
[Article]

Knaack, Ulrich (2014):
Concrete canoe: Anthrazit mit roten Fugen. Sechs Meter lang, ein Kanu ganz aus Beton.
In: 52 Grad : das Magazin der Detmolder Schule für Architektur und Innenarchitektur, pp. 30-31, 5, [Article]

Knaack, Ulrich and Bilow, M. and Klein, T. (2014):
Innovationen fallen nicht vom Himmel.
In: Glaswelt: Glas, Fenster, Fassade, pp. 26-27, 2014, (1), [Article]

Knaack, Ulrich and Klein, T. and Bilow, M. and Auer, T. (2014):
Fasaden: Prinzipien der Konstruktion.
Basel, Switzerland, Birkhäuser Verlag, ISBN 978-3-03821-044-3,
[Book]

Hilcken, J. and Boxheimer, Kaja and Schneider, Jens and Wörner, Johann-Dietrich and Franz, J. (2014):
Untersuchung der zyklischen Ermüdung von thermisch vorgespanntem Kalk-Natron-Silikatglas.
In: Glasbau 2014, Belrin, Ernst & Sohn, pp. 253-266, [Book Section]

Grammou, N. and Schneider, Jens
Bletzinger, K. and Fisch, R. and Gebbeken, N. (eds.) (2014):
Analyse zu Zusammenhängen zwischen Schnee, Wind und Temperatur bei Schnee-Ereignissen für ausgewählte Standorte in Deutschland.
In: Baustatik- Baupraxis 12, München, TU München / UniBw München, pp. 29-36, [Book Section]

Knaack, Ulrich (2014):
Facade Design and Engineering - Finding the scope within a growing community.
In: Journal of Facade Design and Engineering, IOS Press, pp. 135-136, 2, (3-4), ISSN 2213-3038 (E), 2213-302X (P),
[Online-Edition: http://dx.doi.org/10.7480/jfde.2014.3-4],
[Article]

Kuntsche, Johannes K. and Schneider, Jens (2014):
Experimental and numerical investigation of the mechanical behavior of explosion resistant glazing.
In: Engineered Transparency, pp. 174-184, [Online-Edition: http://www.engineered-transparency.eu/cms/#heading_Review%20...],
[Article]

Schneider, Jens and Schula, Sebastian and Kuntsche, Johannes K. (2014):
Chancen und Risiken beim Bauen mit Glas.
In: 18. Dresdner Baustatik-Seminar "Chancen und Risiken in der Tragwerksplanung", Dresden, 17.10.2014, [Online-Edition: https://tu-dresden.de/bu/bauingenieurwesen/sdt/tagungen/Arch...],
[Conference or Workshop Item]

Franz, Johannes and Schneider, Jens and Kuntsche, Johannes K. and Hilcken, Jonas (2014):
Untersuchungen zum Resttragverhalten von Verbundglas: Through-Cracked-Tensile-Test.
In: Glasbau 2014, Berlin, Ernst&Sohn, pp. 241-252, [Online-Edition: https://www.ernst-und-sohn.de/glasbau-2014],
[Book Section]

Schneider, Jens and Kuntsche, Johannes K. (2014):
Rückhaltesysteme für geklemmte Verbundglasplatten bei Explosionsbeanspruchung.
In: Fachtagung Baustatik-Baupraxis 12, Technische Universität München / Universität der Bundeswehr Münschen, 24. – 25. Februar 2014, [Conference or Workshop Item]

Kuntsche, Johannes K. and Schneider, Jens (2014):
Mechanical behaviour of polymer interlayers in explosion resistant glazing.
In: Challenging Glass 4 & COST Action TU 0905 Final Conference, Lausanne, [Conference or Workshop Item]

Langner, Normen and Bewersdorff, David (2014):
Simulation Based Planning of Open Space Working Areas in Commercial Buildings.
In: ASim 2014, IBPSA Asia Conference, Nagoya, Japan, 28.-29.11.2014, [Conference or Workshop Item]

Bewersdorff, David and Simsch, Gerd (2014):
Energetische Sanierung im Wohnungsbu - Effiziente Behaglichkeit.
In: Darmstadt Concrete, pp. 25-26, [Online-Edition: http://www.freunde-des-ifm.de/wp-content/uploads/2016/12/DAC...],
[Book Section]

Bewersdorff, David and Simsch, Gerd (2014):
Energieeffizienz und Behaglichkeit von Bestandsbauten (1920-2000) im Kontext normativer und gesetzlicher Regelungen.
In: Darmstadt Concrete, pp. 23-24, [Book Section]

Schober, Kay-Uwe and Kuechler, Michael and Drass, Michael (2014):
Advancement of glued-in rods using polymer concrete as composite material.
In: 13th World Conferece on Timber Engineering WCTE 2014, Quebec City Canada, 10.-14.08.2014, [Conference or Workshop Item]

Schober, Kay-Uwe and Becker, Wieland and Drass, Michael and Weber, Jan (2014):
High-performance timber composite joints for spatial round wood truss structures.
In: 13th World Conferece on Timber Engineering WCTE 2014, Quebec City Canada, 10.-14.08.2014, [Conference or Workshop Item]

Schober, Kay-Uwe and Drass, Michael and Kuechler, M. (2014):
Glued-inrods in timber joints: Characterization of failure modes dependent on the test set-up.
In: Experimental Research with Timber - Cost FP1004 ESR conference, Prague Czech Republic, 21.-23.05.2014, [Conference or Workshop Item]

Firus, Andrei and Werkle, Horst and Francke, Wolfgang and Clausner, C. (2014):
Evaluation of footfall-induced vibrations on thier importance in a biomechanics laboratory.
In: International Scientific Conference CIBv, Brasov, Romania, 7.-8.11.2014, [Conference or Workshop Item]

Hilcken, Jonas and Boxheimer, Kaja (2014):
Ermüdung von Floatglas, TVG und ESG bei zyklischer Belastung.
In: Glaswelt 2014, [Article]

Franz, Johannes and Schneider, Jens and Kuntsche, Johannes K. and Hilcken, Jonas (2014):
Untersuchungen zum Resttragverhalten von Verbundglas: Through-Cracked-Tensile Test.
In: Stahlbau, pp. 241-252, 83, (S1), ISSN 0038-9145, 1437-1049,
[Online-Edition: http://onlinelibrary.wiley.com/doi/10.1002/stab.201490063/fu...],
[Article]

Knaack, Ulrich (2014):
Roadmap Fassade - Stand 2014.
In: XIA Intelligente Architektur, pp. 88-93, 88, (7-9), [Article]

Knaack, Ulrich (2014):
Fassadenforschung in Darmstadt.
In: Xia intelligente Architektur 10-12/14 Zeitschrift für Architektur und Technik, (89), ISSN 0949-2356,
[Article]

Knaack, Ulrich and Klein, T. and Bilow, M. and Auer, T. (2014):
Facades: Principles of construction.
2., revised edition,
Basel, Birkhäuser, ISBN 978-3-03821-044-3,
[Book]

Knaack, Ulrich and Klein, T. and Bilow, M. and Auer, T. (2014):
Fassaden: Prinzipien der Konstruktion.
3. und überarb. Aufl.,
Basel, Birkhäuser, ISBN 978-3-03821-094-8,
[Book]

Knaack, Ulrich (2014):
Potential for innovative massive building envelope systems – Scenario development towards integrated active systems.
In: Journal of Facade Design & Engineering, IOS Press, pp. 255-268, 2, (3-4), ISSN 2213-3038,
DOI: 10.3233/FDE-150024,
[Article]

Knaack, Ulrich and Klein, Tillmann (2014):
Facade Design and Engineering: Finding the scope within a growing community.
In: Journal of Facade Design & Engineering, pp. 135-136, 2, (3-4), [Article]

Knaack, Ulrich (2014):
Roadmap Fassade – Stand 2014.
In: Xia intelligente Architektur, Verlagsanstalt Alexander Koch GmbH, pp. 88-93, 88, (7/9), ISSN 0949-2356,
[Article]

Hickert, Sascha and Knaack, Ulrich (2014):
Freigeformte Betonkonstruktionen: Formen, Schalungssysteme und technische Potentiale.
In: Leicht bauen mit Beton: Forschung im Schwerpunktprogramm 1542, Förderphase 1, Dresden, TU Dresden Institut für Massivbau, [Online-Edition: http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-171490],
[Conference or Workshop Item]

Michel, Matthias and Knaack, Ulrich (2014):
Grundlagen zur Entwicklung adaptiver Schalungssysteme für frei geformte Betonbauteile.
TU Dresden Institut für Massivbau, [Conference or Workshop Item]

2013

Knaack, Ulrich and Klein, T. (eds.) (2013):
First issue of “Journal of Facade Design and Construction”.
IOS Press, [Journal]

Schula, Sebastian and Schneider, Jens and Vandebroek, M. and Belis, J. (2013):
Fracture strength of glass, engineering testing methods and estimation of characteristic values.
In: COST Action TU0905, Mid-term Conference on Structural Glass, Proceedings, In: COST Action TU0905, Mid-term Conference on Structural Glass, London, UK: Taylor & Francis Group., [Conference or Workshop Item]

Knaack, Ulrich and Klein, T. (2013):
The Future Envelope 7 - façade value.
TU Delft, [Conference or Workshop Item]

Knaack, Ulrich (2013):
Innovative massive Wandsysteme – eine Herleitung möglicher Szenarien.
In: Mauerwerk - Jahrgang 17, pp. 372-378, (6), DOI: 10.1002/dama.201300600,
[Article]

Pottgieser, U. and Knaack, Ulrich and Böke, J. (2013):
Façade 2013 – Design vs Performance.
Lemgo, HS OWL, [Journal]

Kuntsche, Johannes K. and Schneider, Jens and Kolling, Stefan (2013):
Mechanische Eigenschaften von Glas-Verbundmaterialien unter hohen Verzerrungsraten.
In: 2. Darmstädter Ingenieurkongress Bau und Umwelt, Darmstadt, pp. 401-405, [Book Section]

Franz, Johannes and Kuntsche, Johannes K. (2013):
Damit die Folie sicher hält - Neue Prüfmethoden für Glaslaminate.
In: Glaswelt, Gentner, pp. 22-23, (12), ISSN 0017-1107,
[Online-Edition: https://www.glaswelt.de/],
[Article]

Kuntsche, Johannes K. and Schneider, Jens (2013):
Explosion resistant glazing - experimental tests and numerical simulation.
In: Glass Performance Days Finland 2013, Tampere, Finland, pp. 173-177, [Book Section]

Schober, Kay-Uwe and Drass, Michael and Becker, Wieland (2013):
Adhesive strength of timber joints with unconventional glued-in rods.
In: Wood Adhesives 2013, Toronto, ON, Canada, 09.-11.10.2013, [Online-Edition: http://www.forestprod.org/woodadhesives/index-1.html],
[Conference or Workshop Item]

Langner, Normen and Bewersdorff, David (2013):
Sommerlicher Wärmeschutz nach DIN 4108-2: Abgleich der Übertemperaturgradstunden aus der thermischen Simulation mit dem Sonneneintragskennwert am Beispiel unterschiedlicher Raumsituationen.
In: Bauphysiktage Kaiserslautern 2013, [Article]

Schober, Kay-Uwe and Drass, Michael (2013):
Concrete-based adhesives used in connections.
In: Enhance mechanical properties of timber, engineerred wood products and timber structures - COST FP1004 ESR conference, Nicosia, Cyprus, [Conference or Workshop Item]

Werkle, Horst and Francke, Wolfgang and Firus, Andrei and Clausner, C. (2013):
Einfluss von Deckenschwingungen auf die Messgenauigkeit in Ganglaboren.
In: 13. D-A-CH Tagung für Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013), Wien, 29.-30.08.2013, 283, [Conference or Workshop Item]

Hilcken, Jonas and Schneider, Jens and Boxheimer, Kaja (2013):
Dauerschwingfestigkeit von Glas.
In: 2. Darmstädter Ingenieurkongress 2013, Darmstadt, [Conference or Workshop Item]

Wörner, Johann-Dietrich and Boxheimer, Kaja (2013):
Wissenschaftliche Begleitung des Vorhabens „Fabrik als Passivhaus“.
[Report]

Knaack, Ulrich
Cruz, P.J.S. (ed.) (2013):
A facade roadmap.
In: Structures and architecture: Concepts, applications and challenges, Leiden, CRC Press / Balkema - Taylor & Francis Group, pp. 4-6, [Book Section]

Knaack, Ulrich and Klein, T. (eds.) (2013):
Journal of Façade Design and Engineering Volume 1, Number 1,2,2013.
IOS Press, ISSN 2213-3038/13,
[Journal]

Konstantinou, T. and Knaack, Ulrich (2013):
An integrated refurbishment design process to energy efficiency.
In: Proceedings of CLIMA 2013: 11th REHVA world congress & 8th international conference on IAQVEC "Energy efficient, smart and healthy buildings", Praag, Guarant, pp. 1-11, [Book Section]

Konstantinou, T. and Knaack, Ulrich (2013):
An approach to integrate energy efficiency upgrade into refurbishment design process, applied in two case-study buildings in Northern European climate.
In: Energy and Buildings, pp. 301-309, 59, (April), DOI: 10.1016/j.enbuild.2012.12.023,
[Article]

Knaack, Ulrich (2013):
Ausblick.
In: Umweltgerechtes Bauen: Potenzial ungenutzter Gebäudesubstanz, Detmold, Detmolder Schule für Architektur und Innenarchitektur, pp. 41-42, [Book Section]

Knaack, Ulrich and Klein, T. (2013):
Editorial: Preface.
In: Journal of Facade Design and Engineering, IOS Press, p. 1, 1, (1), ISSN 2213-3038 (E), 2213-302X (P),
[Article]

Knaack, Ulrich and Artmann, L.
Vetter, A.K. (ed.) (2013):
Entwerfen und Konstruieren / Design and construction.
In: 1893 - 2013 Eine Schule für Gestaltung: 120 Jahre Lehrtradition an der Demolter Schule für Architektur und Innenarchitektur, Baunach, Spurbuchverlag, pp. 164-165, [Book Section]

Pottgiesser, U. and Hemmerling, M. and Knaack, Ulrich and Schulz, J.U. and Schwesig, M. and Schwickert, S. (2013):
Forschung\ConstructionLab.
In: 52 Grad : das Magazin der Detmolder Schule für Architektur und Innenarchitektur, p. 83, 2013, (4), [Article]

Knaack, Ulrich (2013):
Innovative massive Wandsysteme: eine Herleitung möglicher Szenarien.
In: Mauerwerk: Zeitschrift für Technik und Architektur, pp. 372-378, 17, (6), DOI: 10.1002/dama.201300600,
[Article]

Knaack, Ulrich
Pottgiesser, U. and Strauss, H. (eds.) (2013):
Roadmap Fassade: Wege und Wegweiser.
In: Produktentwicklung Architektur: Visionen, Methoden, Innovationen, Basel, Birkhäuser Verlag, pp. 34-51, [Book Section]

Hilcken, J. and Boxheimer, Kaja and Schneider, Jens and Wörner, Johann-Dietrich (2013):
Untersuchungen zum Ermüdungsverhalten von gezielt vorgeschädigtem Floatglas aus Kalk-Natron-Silikatglas bei zyklischer Belastung.
In: Glasbau 2013, Berlin, Ernst & Sohn, [Conference or Workshop Item]

Knaack, Ulrich
Pottgiesser, U. and Strauss, H. (eds.) (2013):
Facade Road Map - paths and pathfinders.
In: Product Development and Architecture, Birkhäuser, pp. 34-51, [Book Section]

Konstantinou, T. and Knaack, Ulrich (2013):
An approach to integrated energy efficiency upgrade into refurbishment design process, applied in two case-study buildings in Northern European climate.
In: Energy and Buildings, CRC Press, pp. 301-309, (59), [Article]

Strauss, Holger (2013):
AM Envelope: The potential of Additive Manufacturing for facade construction.
TU Delft, In: Architecture an the Built environment, ISBN 9781481214339,
[Ph.D. Thesis]

Pottgiesser, Uta and Knaack, Ulrich and Böke, J. (eds.) (2013):
Facade2013: Design vs. development.
Detmold, In: Facade2013: Design vs. development, Detmold, Hochschule Ostwestfalen-Lippe, 29. November 2013, [Conference or Workshop Item]

Knaack, Ulrich and Klein, T. and Konstantinou, T. (eds.) (2013):
The future envelope 7: Facade value.
Delft, In: The future envelope 7: Facade value, Delft University of Technology, 6 June 2013, In: The future envelope, 7, [Conference or Workshop Item]

2012

Borg Costanzi, Christopher (2012):
Assessing durability of PFA-Blended concrete.
Malta, University of Malta, [Bachelor Thesis]

Schneider, Jens and Kuntsche, J. and Kleuderlein, J.
Bos, F. and Louter, C. and Nijsse, R. and Veer, F. (eds.) (2012):
Load-Bearing Capacity of Thin Film Photovoltaic Modules.
In: Proceedings of Challenging Glass 3, Delft, IOS Press, [Conference or Workshop Item]

Konstantinou, T. and Knaack, Ulrich
Giulio, R. (ed.) (2012):
Energy-efficiency upgrade of the residential building stock: An integrated approach to refurbishment design process.
In: Improving the quality of suburban building stock, Ferrara, UnifePress, ISBN 978-88-96463-08-6,
[Conference or Workshop Item]

Strauss, H. and Knaack, Ulrich (2012):
AM envelope : potentials of additive manufacturing for facade construction.
In: Proceedings of the VI International Congress on Architectural Envelopes, [Conference or Workshop Item]

Knaack, Ulrich (2012):
Facades : road map to 2050.
In: SZFF-Fachtagung 2012 : Trends im Fassadenbau, Schweizerische Zentrale Fenster und Fassaden, [Conference or Workshop Item]

Knaack, Ulrich and Chung-Klatte, S. and Hasselbach, R. (2012):
Prefabricated systems.
Basel, Birkhäuser, In: Principles of construction, ISBN 978-3-7643-8747-1,
[Book]

Knaack, Ulrich
Degenhardt, C. and Horvath, D. and Pauls, M. (eds.) (2012):
Interview.
In: Future city lab: high urban-low carbon, dialogues, Thomas Auer, Matthias Rudolph, pp. 67-69, [Book Section]

Knaack, Ulrich (2012):
Fassaden werden immer komplexer.
In: Fassade, pp. 28-29, 2012, (4), [Article]

Knaack, Ulrich (2012):
Building envelopes for tomorrow : smart, green, modular.
In: Proceedings of the International Rosenheim Window & Facade Conference 2012, Upcoming constructions: modular - straightforward - safe, Rosenheim, IFT Rosenheim, ISBN 978-3-86791-319-5,
[Conference or Workshop Item]

Schneider, Jens and Kolling, Stefan and Kuntsche, Johannes K. and Mönnich, Sebastian (2012):
Tensile properties of different polymer interlayers under high strain rates.
In: Engineered Transparency 2012, Düsseldorf, pp. 427-437, [Book Section]

Schneider, Jens and Kuntsche, Johannes K. (2012):
Glas contra Sprengstoff - Anforderungen an explosionshemmende Verglasungen.
In: Glaswelt 11.2012, pp. 32-33, [Article]

Rühl, Andreas and Kolling, Stefan and Kuntsche, Johannes K. and Schneider, Jens and Mönnich, Sebastian (2012):
Characterization and Modeling of Polymer Interlayers for Laminated Glass.
In: 11. LS-Dyna Forum 2012, [Conference or Workshop Item]

Schneider, Jens and Kuntsche, Johannes K. and Kleuderlein, Jonas (2012):
Load-Bearing Capacity of Thin Film Photovvoltaic Modules.
In: Challenging Glass 3, Delft, pp. 553-564, [Book Section]

Kolling, Stefan and Schneider, Jens and Gebbeken, Norbert and Larcher, Martin and Alter, Christian and Kuntsche, Johannes K. (2012):
Deformations- und Bruchverhalten von Verbundsicherheitsglas unter dynamischer Beanspruchung.
In: Stahlbau, Berlin, Ernst&Sohn, pp. 219-225, [Book Section]

Schneider, Jens and Kleuderlein, Jonas and Kuntsche, Johannes K. (2012):
Tragfähigkeit von Dünnschicht-Photovoltaik-Modulen.
In: Glasbau 2012, Berlin, Ernst&Sohn, pp. 315-325, [Book Section]

Schober, Kay-Uwe and Becker, Wieland and Drass, Michael (2012):
Advanced interface interaction in timber engineering joints with dowel-type fasteners embedded in high-performance ceramic fillers.
In: 12th World Conference on Timber Engineering WCTE 2012, Auckland New Zealand, 15.-19.07.2012, [Conference or Workshop Item]

Drass, Michael and Schober, Kay-Uwe (2012):
Grenzflächenaktivierung eingeklebter Stahlstangen.
In: 2. Trierer Holzbaugespräch, Trier, Germany, 11.05.2012, [Conference or Workshop Item]

Schober, Kay-Uwe and Drass, Michael (2012):
Advanced interface interaction in timber engineering joints.
In: Enhance mechanical properties of timber, engineerred wood products and timber structures - COST FP1004 ESR conference, Zagreb, [Conference or Workshop Item]

Schneider, Jens and Hilcken, Jonas and Kasper, Andreas (2012):
Ein Modell zur Bestimmung der Versagenswahrscheinlichkeit von heißgelagertem ESG.
In: Glasbau Stahlbau, Ernst&Sohn, pp. 171-184, 81, (S1), [Online-Edition: http://10.1002/stab.201290061],
[Article]

Knaack, Ulrich (2012):
The future must be simpler.
In: Deutsche Bau Zeitschrift, pp. 30-31, 2012, (9), [Article]

Knaack, Ulrich and Bilow, M. and Konstantinou, T. and Lieverse, B. (2012):
Reimagining the envelope.
Rotterdam, 010 Publishers, Imagine 06, ISBN 978-90-6450-800-4,
[Book]

Knaack, Ulrich (2012):
Reimagining The Envelope.
In: Gevelbouw, [Article]

Strauss, H. and Knaack, Ulrich
Schwickert, S. (ed.) (2012):
Baukonstruktion.
In: Abschlussbericht ESPOF, Hochschule Ostwestfalen-Lippe, pp. 4-9, [Book Section]

Knaack, Ulrich and Hildebrand, L. and Konstantinou, T. and Wieland, H.J. (2012):
Reimagining housing.
Rotterdam, NAi publishers, Imagine, ISBN 978-94-6208-036-2,
[Book]

Knaack, Ulrich and Chung-Klatte, S. and Hasselbach, R. (2012):
Systembau.
Basel, Birkhäuser, In: Prinzipien der Konstruktion, ISBN 978-3-7643-8746-4,
[Book]

Knaack, Ulrich and Klein, T. and Bilow, M. and Techen, H.
Mehl, R. (ed.) (2012):
Total concrete: Die nächste Generation massiver Fassaden.
In: Beton Bauteile 2013: Entwerfen Planen Ausführen, Gütersloh, Bauverlag, pp. 106-118, [Book Section]

Knaack, Ulrich and Klein, T. and Bilow, M. (2012):
Imagine 07 – reimagine housing.
Rotterdam, Publisher 010, [Journal]

Knaack, Ulrich and Klein, T. and Billow, M. (2012):
Imagine 06 – reimagining the envelope.
Rotterdam, Publisher 010, In: Imagine, ISBN 9789064508004,
[Book]

Knaack, Ulrich and Chung-Klatte, Sharon and Hasselbach, Reinhard (2012):
Prefabricated systems : principles of construction.
Basel, Birkhäuser Verlag, ISBN 978-3-0346-1140-4,
[Book]

Schneider, Jens and Franz, J.
Schneider, J. and Weller, B. (eds.) (2012):
Classification of the material properties of interlayers for laminated glass regarding the post-breakage behavior.
In: Glass, facade, energy: Engineered transparency - international conference at glasstec, Darmstadt, Darmstadt : Techn. Univ., [Conference or Workshop Item]

Schneider, Jens and Kuntsche, J. (2012):
Glas contra Sprengstoff – Anforderungen an explosionshemmende Verglasungen.
In: Glaswelt, Alfons W. Gentner Verlag, Stuttgart, pp. 32-33, (11), [Article]

Schneider, Jens and Schula, Sebastian and Weinhold, W.P. (2012):
Characterisation of the scratch resistance of annealed and tempered architectural glass.
In: Thin Solid Films, Elsevier, pp. 4190-4198, 520, (12), ISSN 00406090,
DOI: 10.1016/j.tsf.2011.04.104,
[Article]

2011

Knaack, Ulrich and Auer, Thomas and Bilow, Marcel and Hildebrand, L. (2011):
Energy.
Rotterdam, nai010 publishers, In: imagine, 05, ISBN 978-90-6450-761-8,
[Book]

Maier, Andreas and Pepeliankova, R. and Marder, R., R. and Grassegger-Schön, G. (2011):
Der ehemalige Hindenburgbau in Stuttgart, Kartierung eines Kulturdenkmals. Natursteinsanierung Stuttgart 2011.
Stuttgart, Fraunhofer RB Verlag 2011, [Report]

Knaack, Ulrich and Bilow, M. and Hildebrand, L. and Auer, T. (2011):
Imagine 05 Energy.
Rotterdam, Publisher 010, [Book]

Knaack, Ulrich and Klein, T. (2011):
The Future Envelope 5.
Delft, TU Delft, [Book]

Knaack, Ulrich
Stacey, F. and Stacey, M. (eds.) (2011):
About innovation : or how and why facades undergo constant development.
In: Adaptive architecture : An international conference, In: Adaptive architecture, London, 03.03.2011 - 05.03.2011, [Conference or Workshop Item]

Pottgiesser, U. and Knaack, Ulrich and Strauss, H. (2011):
Facade 2011 : Super green.
Detmold, Hochschule Ostwestfalen-Lippe (University of Applied Science), ISBN 978-3-939349-17-4,
[Book]

Knaack, Ulrich and Klein, T. and Bilow, M. and Techen, H. (2011):
Performance driven envelopes.
Rotterdam, 010 Publishers, In: Imagine, 3, ISBN 978-90-6450-675-8,
[Book]

Konstantinou, T. and Knaack, Ulrich (2011):
Refurbishment of residential buildings : a design approach to energy-efficiency upgrades.
In: International conference on green buildings and sustainable cities, Amsterdam, Elsevier, In: Green buildings and sustainable cities (GBSC), Bologna, 15.9.-16.9.2011, [Conference or Workshop Item]

Pottgiesser, U. and Knaack, Ulrich and Strauss, H. (2011):
façade 2011 - Super Green.
HS OWL, [Book]

Knaack, Ulrich and Bilow, M. and Klein, T. and Auer, T. (2011):
Gevels - Principes van het construeren.
Amsterdam, SUN, ISBN 9789461050458,
[Book]

Schneider, Jens and Schmidt, H. and Wacker, J.
Beer, G. and Dünser, C. and Hofstetter, G. and Theiner, Y. (eds.) (2011):
Windbeanspruchung und Aussteifung von Reiheneckhäusern und Reihenmittelhäusern – experimentelle und probabilistische Untersuchung.
In: Baustatik – Baupraxis 11, Fachtagung der Lehrstühle und Institute für Baustatik, Universität Innsbruck /TU Graz, In: Fachtagung der Lehrstühle und Institute für Baustatik,, Universität Innsbruck, 21. – 22.02.2011, [Conference or Workshop Item]

Schneider, Jens and Schula, S.
Beer, G. and Dünser, C. and Hofstetter, G. and Theiner, Y. (eds.) (2011):
Zwei Verfahren zum rechnerischen Nachweis der dynamischen Beanspruchung von Verglasungen durch weichen Stoß.
In: Baustatik – Baupraxis 11, Graz, Inst. für Baustatik, Techn. Univ. Graz, In: Fachtagung der Lehrstühle und Institute für Baustatik, Universität Innsbruck, 21. – 22.02.2011, [Conference or Workshop Item]

2010

Bachmann, Gregor (2010):
Entwicklung von Grund- und Böschungsbruch : Experimente und Numerik.
Darmstadt, Techn. Univ., TU Darmstadt, ISBN 978-3-931396-88-6,
[Ph.D. Thesis]

Schneider, Jens (2010):
Rechnerischer Nachweis des weichen Stoßes: Grundlagen und Vorschlag für DIN 18008-4.
In: Glas im konstruktiven Ingenieurbau, Hochschule für angewandte Wissenschaften FH München, 18.03.2010, 8, [Conference or Workshop Item]

Knaack, Ulrich (2010):
Constructionlab - Die gedruckte Fassade?
In: Detmolder Schule für Architektur und Innenarchitektur, p. 56, 2010, (1), [Article]

Knaack, Ulrich (2010):
Bauen mit Glas.
In: XIA Intelligente Architektur, pp. 1-4, 72, [Article]

Knaack, Ulrich (2010):
Bewegte Hülle.
In: Detmolder Schule für Architektur und Innenarchitektur, p. 58, (1), [Article]

Meijs, M.H. and Knaack, Ulrich (2010):
Bouwdelen en verbindingen - Principes van het construeren.
Amsterdam, SUN, ISBN 978-94-6105-0441,
[Book]

Knaack, Ulrich
L Katgerman, L. and Soetens, F. (eds.) (2010):
Aluminium in facades.
In: New Frontiers in Light Metals, Proceedings of the 11th International Aluminium Conference (INALCO 2010), IOS Press, pp. 47-55, [Book Section]

Knaack, Ulrich (2010):
Graue Energie in der Fassade.
In: Detmolder Schule für Architektur und Innenarchitektur, p. 57, 2010, (1), [Article]

Knaack, Ulrich
Meyer, D and Zihlmann, U (eds.) (2010):
Innovative materials and embodied energy.
In: Facade 2010 - conference on building envelopes, pp. 98-107, [Book Section]

Knaack, Ulrich and Bilow, M. and Strauss, H. (2010):
Rapids - Layere fabrication technologies for facades and building construction.
Rotterdam, 010 Publishers, ISBN 978-90-6450-676-5,
[Book]

Badarnah, L. and Nachman Farchi, Y. and Knaack, Ulrich
Carpi, A. and Brebbia, C.A. (eds.) (2010):
Solutions from nature for building envelope thermoregulation.
In: Design and nature V - Comparing design in nature with science and engineering, Southampton, WIT Press, pp. 251-262, [Book Section]

Knaack, Ulrich (2010):
The total envelope.
In: Xia Intelligente Architektur, p. 1, 72, [Article]

Schneider, Jens and Schula, S. (2010):
Transient impact simulation and a simplified mechanical model for soft body impact on glass panes (engineered transparency).
In: International Conference at glasstec, Tagungsband, Düsseldorf, Germany, 29. – 30.09.2010, [Conference or Workshop Item]

Schneider, Jens and Grammou, N. and Kleuderlein, J. (2010):
Optimization of the structural capacity and thermal behavior of SCPP glass roof.
In: Proceedings SCPT 2010, Ruhr Universität Bochum, 28.- 30.09.2010, [Conference or Workshop Item]

Garrecht, H. and Schneider, Jens and Ott, A. and Franz, J. and Heinsdorff, M. (2010):
Steigerung der Tragfähigkeit für das Deutsch-Chinesische Haus der EXPO 2010 durch Optimierung des Bambus-Beton-Verbundes.
In: Bauingenieur, Springer-VDI-Verlag, pp. 353-360, Juli/Aug. 2010, (85), [Online-Edition: https://www.bauingenieur.de/bauing/article.php?data[article_...],
[Article]

Schneider, Jens and Schula, S. (2010):
Bent architectural glasses.
In: International Conference on Structure and Architecture (ICSA 2010), Guimaraes, Portugal, 21. – 23.07.2010, [Conference or Workshop Item]

Schneider, Jens and Weinhold, W. and Schula, S. (2010):
Characterization of the scratch resistance of tempered architectural glass and glass coatings by in-situ microtribology.
In: The International Conference on Coatings on Glass and Plastics (ICCG 8), Braunschweig, Germany, 13.- 17.06.2010, [Conference or Workshop Item]

Ensslen, F. and Schneider, Jens and Schula, S. (2010):
Produktion, Eigenschaften und Tragverhalten von thermisch gebogenen Floatgläsern für das Bauwesen – Erstprüfung und werkseigene Produktionskontrolle im Rahmen des Zulassungsverfahrens.
In: Stahlbau Spezial 2010 – Konstruktiver Glasbau, Ernst & Sohn, pp. 46-51, [Article]

Kleuderlein, J. and Schneider, Jens (2010):
Flächige und punktuelle Fügetechniken bei Gläsern.
In: deutsche bauzeitung db, Deutsche Verlags-Anstalt, pp. 68-73, (Nr. 11), ISSN 0721-1902,
[Article]

Knaack, Ulrich and Bilow, Marcel and Strauss, Holger (2010):
Rapids – Layered fabrication technologies for facades and building construction.
Rotterdam, 010 Publishers, In: imagine, 4, ISBN 9064506760, 9789064506765,
[Book]

2009

Knaack, Ulrich (2009):
De gevelbouwer.
In: Gevelbouw, Louwers Mediagroep, p. 33, 6, (4), [Article]

Wachter, Stefan (2009):
Dreidimensionale, zeitvariante stoffliche Modellierung von granularem Steinsalz.
Darmstadt, Technische Universität, TU Darmstadt, [Ph.D. Thesis]

Knaack, Ulrich (2009):
Naar een integrale aanpak van gavel en klimaatinstallaties.
In: Gevelbouw, Control Media, pp. 22-25, 6, (1), [Article]

Knaack, Ulrich and Techen, Holger (2009):
Konstruktiver Glasbau – auf Distanz.
In: Stahlbau, Ernst & Sohn, pp. 3-6, 78, (S 1), ISSN 0038-9145,
[Online-Edition: https://onlinelibrary.wiley.com/doi/10.1002/stab.200910022],
[Article]

Nzahabwanimana, Alexis (2009):
Effects of seismic soil-structure interaction on the bearing capacity factors for shallow strip footings.
Darmstadt, Inst. für Geotechnik, TU Darmstadt, In: Mitteilungen des Institutes und der Versuchsanstalt für Geotechnik der Technischen Universität Darmstadt, 85, ISBN 978-3-931396-93-0,
[Ph.D. Thesis]

Knaack, Ulrich and Hofmeister, L. (2009):
Bewertung von Fassaden vor dem Hintergrund von grauer Energie.
In: Innovative Fassadentechnik, Berlin, Ernst & Sohn, pp. 6-10, [Book Section]

Knaack, Ulrich (2009):
Report: Fassadentechnik-Bauen mit Glas.
In: Xia intelligente architektur, Verlagsanstalt Alexander Koch GmbH, pp. 67-71, 07-09/2009, ISSN 0949-2356,
[Article]

Knaack, Ulrich and Bilow, Marcel and Strauss, Holger (2009):
Rapid Technologien und Architektur.
In: Xia intelligente Architektur, Verlagsanstalt Alexander Koch GmbH, pp. 78-81, (10-12/2009), ISSN 0949-2356,
[Article]

Knaack, Ulrich
Calabrese, L. and ten Doeschate, A. and Geenen, A. and Hauptmann, D. and Heintz, J. and Knaack, U. (eds.) (2009):
BK2000 - a design project.
In: The Architecture Annual 2007-2008, Rotterdam, 010 Publishers, pp. 116-117, [Book Section]

Meijs, M.H. and Knaack, Ulrich (2009):
Bauteile und Verbindungen.
Basel, Birkhäuser, ISBN 9783764386689,
[Book]

Knaack, Ulrich (2009):
Column.
In: Gevelbouw, p. 15, 6, (1), [Article]

Meijs, M.H. and Knaack, Ulrich (2009):
Components and Connections.
Basel, Birkhäuser, ISBN 9783764386696,
[Book]

Schneider, Jens and Beyer, J. (2009):
Bemessung punktförmig gelagerter Verglasungen. Stand der Technik und geplante Regelungen der DIN 18008-3.
In: Seminar „Weiterbildung für Tragwerksplaner“, Universität Kaiserslautern, 23.09.2009, [Conference or Workshop Item]

Schneider, Jens and Kooymans, J. (2009):
The need for research and development collaboration between designers and industry.
In: Conference proceedings, In: Glass Performance Days (GPD), Tampere, Finnland, 12 - 15 June 2009, [Conference or Workshop Item]

Schneider, Jens (2009):
Bauen mit gebogenen Gläsern – Herstellung, Eigenschaften, Tragverhalten.
In: 2. VDI Tagung: Bauen mit innovativen Werkstoffen, Düsseldorf, VDI-Verlag, In: Bauen mit innovativen Werkstoffen, Köln, 03. – 04.11.2009, In: VDI-Berichte, 2084, [Conference or Workshop Item]

Schneider, Jens
Bells, M. and Kim, J. (eds.) (2009):
Making Visions Reality.
In: Engineered Transparency – The Technical, Visual, and Spatial Effects of Glass, New York, Princeton Architectural Press, pp. 182-188, [Book Section]

Knaack, Ulrich (2009):
Developing ideas on the move.
In: Dax, cck Media den Haag, pp. 46-47, 4, (24), [Article]

Knaack, Ulrich (2009):
De architect: creatief brein of bouwbureau.
In: Gevelbouw, Louwers Mediagroep, p. 25, 6, (2), [Article]

Knaack, Ulrich and Hildebrand, Linda (2009):
Graue Energie in der Fassade - Ökologie Indikator.
In: Zeno, Forum Zeitschriften und Spezialmedien GmbH, pp. 31-34, 4, (09), ISSN 1866-8429,
[Article]

Knaack, Ulrich and Klein, Tillmann (2009):
façade technology. inspiring emerging developments.
In: Dax, pp. 48-53, 4, (24), ISSN 1574-9290,
[Article]

Knaack, Ulrich
van den Dobbelsteen, A. (ed.) (2009):
Future facade principles.
Delft, Niederlande, Delft University of Technology, Publicatieburo Bouwkunde, In: 3rd CIB International Conference on Smart and Sustainable Built Environments, Delft, Niederlande, 15-19. Juni 2009, In: SASBE2009 Book of Abbstracts, ISSN 9789052693729,
[Conference or Workshop Item]

Knaack, Ulrich (2009):
Innovative Materialien und graue Energie.
In: Bauen mit Innovativen Werkstoffen, VDI Verlag, pp. 3-11, VDI Berichte, (2084), ISSN 978-3-18-092084-9,
[Article]

2008

Badnarnah, L. and Kadri, U. and Knaack, Ulrich (2008):
A bio-inspired ventilating envelope optimized by air-flow-simulations.
In: Proceedings of the Conference on Sustainable Building SB08, In: The world sustainable building conference 2008, Melbourne, Australia, Melbourne, 21.11.2008-25.11.2008, [Conference or Workshop Item]

Kooymans, J. and Techen, H. and Schneider, Jens
Bos, F. and Louter, C. and Veer, F. (eds.) (2008):
Long Span Glass Fin Design.
In: Challenging Glass - Proceedings International Conference, Delft University Press, In: Conference on Architectural and Structural Applications of Glass, TU Delft, 22.-23.05.2008, [Conference or Workshop Item]

Reymendt, J. and Schneider, Jens
Walraven, Joost C. and Stoelhorst, Dick (eds.) (2008):
Properties and Applications of DUCON ®. A Micro-Reinforced Ultra-High-Performance Concrete.
In: Proceedings International fib-Symposium Tailor Made Concrete Structures, London, Taylor & Francis Group, In: International fib-Symposium Tailor Made Concrete Structures, Amsterdam, 19. – 22.05.2008, ISBN ISBN 978-0-415-47535-8,
[Conference or Workshop Item]

Schneider, Jens and Wörner, Johann-Dietrich (2008):
DIN 18008 – Glas im Bauwesen. Bemessungs- und Konstruktionsregeln.
In: Stahlbau, Ernst & Sohn, pp. 3-9, 77, (S1), ISSN 0038-9145, 1437-1049,
DOI: 10.1002/stab.200810025,
[Article]

Auer, Thomas and Knaack, Ulrich and Techen, Holger (2008):
Imagine - materials, structure and climate.
In: XIA Intelligente Architektur, pp. 56-61, 02, [Article]

Auer, Thomas and Knaack, Ulrich and Techen, Holger (2008):
Imagine - materials, structure and climate.
In: Xia Intelligente Architektur, pp. 46-49, 62, [Article]

Knaack, Ulrich (2008):
Experimenteren, testen en bouwen.
In: Stedebouw en Architectuur, pp. 38-39, 25, (8), [Article]

Knaack, Ulrich and Bilow, Marcel (2008):
Glasfaserbeton - neue Ansätze in der Verwendung von Glas.
In: Glas: Architektur und Technik, pp. 46-49, 14, (2), [Article]

Hemmerling, M. and Knaack, Ulrich and Schulz, J. U. (2008):
Complexity in digital architectural design.
In: eCAADe 26 Architecture 'incomputro' Integrating methods and techniques, [Conference or Workshop Item]

Bekkering, H. C. and van Schaick, J. and van der Spek, S. C. and Vollebregt, A. G. and Bruyns, G. J. B. and Read, S. A. and van Dorst, M. J. and Schütze, T. and van Nes, A. and Steenbergen, C. M. and van den Berg, R. G. P. and Sepulveda, D. and Fuchs, A. and Hauptmann, D. and den Heijer, A. C. and Knaack, Ulrich and Lelieveld, C. M. J. L. and van den Dobbelsteen, A. A. J. F. and Klein, Tillmann and Jurgenhake, B. and Teerds, P. J. (2008):
Virtueel boek: The Architecture Annual 2006-2007.
010 Publishers, [Book]

Knaack, Ulrich
Eekhout, ACJM and Tomiyama, Tetsuo (eds.) (2008):
Integrated design in architecture - and what comes next?
In: Delft science in design 2 : conference proceedings 2007, TU Delft, Delft, Netherlands, 4 Apr 2008 → 4 Apr 2008, [Conference or Workshop Item]

Badarnah, L. and Knaack, Ulrich (2008):
Organizational features in leaves for application in shading systems for building envelopes.
In: Design and nature IV : comparing design in nature with sciences and engineering, Algarve Portugal, 24/06/08 → 26/06/08, [Conference or Workshop Item]

Knaack, Ulrich and Badnarnah, L. (2008):
Shading/Energy generating skin inspired from natural systems.
In: Proceedings SB08 World sustainable building conference, In: SB08 World sustainable building conference 2008, Melbourne, 21 Sep 2008 → 25 Sep 2008, [Conference or Workshop Item]

Ebbert, Timo and Knaack, Ulrich (2008):
Strategies for the refurbishment of office facades - a case study.
In: Proceedings SB08 World sustainable building conference, Melbourne, In: World sustainable building conference 2008, Melbourne, 21 Sep 2008 → 25 Sep 2008, [Conference or Workshop Item]

Knaack, Ulrich (2008):
Grenzen des Machbaren : Ein Versuch, Fassaden neu zu interpretieren.
In: Fassaden - Blick in die Zukunft, VDI Verlag GMBH, In: Fassaden - Blick in die Zukunft - Dusseldorf, Düsseldorf, 22 Apr 2008 → 23 Apr 2008, [Conference or Workshop Item]

Knaack, Ulrich (2008):
Driving the future of glass.
In: Challenging glass, In: In FB Bos, PC Louter&FA Veer (Eds), [Conference or Workshop Item]

Knaack, Ulrich and Bilow, Marcel
Berger, J. and Fischer, A. and Himburg, S. and Kramp, M. (eds.) (2008):
Innovationen im Fassadenbau.
In: Berliner Hoch- und Ingenieurbaukolloquium BHIK 08, Berlin, [Conference or Workshop Item]

Knaack, Ulrich and Klein, Tillmann and Bilow, Marcel (2008):
Imagine 01- Facades.
Rotterdam, 010 Publishers, ISBN 9789064506574,
[Book]

Knaack, Ulrich and Klein, Tillmann and Bilow, Marcel (2008):
Imagine 02 - Deflateables.
Rotterdam, 010 Publishers, ISBN 9789064506567,
[Book]

Schneider, Jens and Keil, Andreas and Hagenmayer, Sandra (2008):
Small concrete pedestrian bridge with integral abutments – an alternative solution for pedestrian bridges over highways.
In: Proceedings International fib-Symposium Tailor Made Concrete Structures, In: International fib-Symposium Tailor Made Concrete Structures, Amsterdam, 19. – 22.05.2008, [Conference or Workshop Item]

Schneider, Jens and Techen, H. and Stengler, R. (2008):
Determination of the Scratch Resistance of Annealed and Tempered Glasses by Using UST (Universal Surface Tester).
In: Proceedings of 53. Internationales Wissenschaftliches Kolloquium, In: 53. Internationales Wissenschaftliches Kolloquium, Technische Universität Ilmenau, 08 – 12 September 2008, [Conference or Workshop Item]

Schneider, Jens (2008):
Weil es machbar ist. Glastreppe der Oper in Toronto.
In: Deutsche Bauzeitung (db), Konradin Medien GmbH, pp. 52-56, 5, ISSN 0721-1902,
[Article]

2007

Knaack, Ulrich (2007):
Workshop high-rise buildings 2007 - een verslag.
In: Boss Magazine, pp. 81-83, [Article]

Bilow, Marcel and Klein, Tillmann and Knaack, Ulrich (2007):
Deflateable structures transferred into façade constructions.
In: III International conference on textile composited and inflatable structures - Barcelona, 17 Sep 2007 → 19 Sep 2007, [Conference or Workshop Item]

Badermah, L. and Knaack, Ulrich and Ebbert, Timo (2007):
Bionic breathing skin for buildings.
In: Portugal SB07 sustauinable construction materials and practices, challenge of the industry for the new millenium, In: Portugal SB'07 Conference, sustainable constructing, materials and practices - Lisbon, Lissabon, 12 Sep 2007 → 14 Sep 2007, [Conference or Workshop Item]

Schneider, Jens (2007):
Making Visions Reality.
In: Proceedings Engineered Transparency, Columbia University Graduate School of Architecture, Planning and Preservation (GSAPP), Columbia University, New York, 27. – 28.09.2007, [Conference or Workshop Item]

Ebbert, T. and Knaack, Ulrich (2007):
An adaptable facade concept for sustainable office refurbishment.
In: Proceedings of building stock activation 2007, Tokyo, [Conference or Workshop Item]

Knaack, Ulrich and Badarnah, L. (2007):
Bionic Ventilation System for Building Envelopes.
In: Building Stock Activation 2007 International Conference of 21st Century COE Program of Tokyo Metropolitan University - Tokyo, Tokyo, 5.11.07 -7.11.07, [Conference or Workshop Item]

Knaack, Ulrich and Badarnah, L. (2007):
Bio-Inspired Ventilation System for Building Envelopes.
In: Proceedings of building stock activation, In: Building Stock Activation 2007 International Conference of 21st Century COE Program of Tokyo Metropolitan University - Tokyo, Tokyo, 5 Nov 2007 → 7 Nov 2007, [Conference or Workshop Item]

Knaack, Ulrich and Thevis, E. and Schwickert, S. (2007):
Prefabricated Houses.
In: Detmolder Schule für Architektur und Innenarchitektur, 1, (15), [Article]

Knaack, Ulrich (2007):
Whats next.
In: Gevelbouw, pp. 18-21, 4, (1), [Article]

Knaack, Ulrich (2007):
Voorgespannen kabelnetgevels heel veel glas en een beetje staal.
In: Dax, pp. 61-64, 3, (15), [Article]

Knaack, Ulrich (2007):
Vezelversterkt beton: modulair en zelfdragend.
In: BouwIQ, pp. 33-35, 12, (2), [Article]

Knaack, Ulrich (2007):
Proefdraaien voor de praktijk - hoogbouwworkshop aan de TU Delft succesvol.
In: ZO techniplan advieurs bv, pp. 9-12, [Article]

Knaack, Ulrich (2007):
Gevels van de toekomst.
In: BouwIQ, pp. 22-24, 12, (4), [Article]

Knaack, Ulrich (2007):
Fassaden - Prinzipien und Konstruktion.
In: Bauwelt, 33, [Article]

Knaack, Ulrich and Bilow, Marcel (2007):
Airick.
In: Detmolder Schule für Architektur und Innenarchitektur, p. 41, 1, [Article]

Knaack, Ulrich and Nolte, C. (2007):
Tragwerksplanung – Untersuchung Holz / Beton.
[Lecture]

Knaack, Ulrich and Bilow, Marcel and Auer, Thomas (2007):
Facades.
Birkhäuser, ISBN 9783764379612,
[Book]

Schneider, Jens and Heger, F. (2007):
Ganzglastreppe in der Oper Toronto/ Kanada.
In: 5. Seminar Glas im konstruktiven Ingenieurbau, Fachhochschule München, Fachhochschule München, 08. – 09.03.2007, Kapitel 9, [Conference or Workshop Item]

Schneider, Jens (2007):
DIN 18008 Glas im Bauwesen – Bemessungs- und Konstruktionsregeln, Erläuterungen und Anwendung.
In: Tagungsband Glasbau 2007, Technischen Universität Dresden, 23.03.07, [Conference or Workshop Item]

Schober, H. and Schneider, Jens and Justiz, S. and Gugeler, J. and Paech, C. and Balz, M. (2007):
Innovations with glass, steel and cables.
In: Proceedings - Glass Performance Days (GPD), In: Glass Performance Days (GPD), Tampere, Finland, 15.-18. Juni 2007, [Conference or Workshop Item]

2006

Schneider, Jens (2006):
Joseph Paxton – Ingenieurporträt.
In: Deutsche Bauzeitung (db), Konradin Medien GmbH, pp. 70-75, (12), ISSN 0721-1902,
[Article]

Knaack, Ulrich (2006):
Tragendes Glas, Wege zur Enmaterialisierung des Raums.
Düsseldorf, In: glasstec 2006, [Conference or Workshop Item]

Knaack, Ulrich (2006):
Werkbundsiedlungen als Vorbild für die Zukunft: Ganzheitliches: Nachhaltigkeit.
In: Symposien zur Werkbundsiedlung Wiesenfeld in München, München, [Conference or Workshop Item]

Schneider, Jens and Wellershoff, F. (2006):
Unter Druck. Tragende Glaskonstruktionen und deren Verbindungstechniken.
In: Deutsche Bauzeitung (db), Konradin Medien GmbH, pp. 57-63, (12), ISSN 0721-1902,
[Article]

Schneider, Jens (2006):
Thermal Tempering Simulation.
In: Proceedings of the International Symposium on the Application of Architectural Glass (ISAAG), In: International Symposium on the Application of Architectural Glass (ISAAG), Munich, Germany, 30-31.10.2006, [Conference or Workshop Item]

Knaack, Ulrich and Pottgiesser, Uta and Bilow, Marcel (2006):
Fassade 2006: Sanierung und Erneuerung.
In: Fassade 2006, München, [Book Section]

Knaack, Ulrich (2006):
Imagine - Inaugurele Rede.
Delft, [Other]

Knaack, Ulrich and Hasselbach, R. (2006):
Introduction new strategies for systems.
In: New strategies for systems : the universisal building system, Delft, pp. 7-10, [Book Section]

Knaack, Ulrich and Ebbert, T. (2006):
The integral enveloppe applied for sustainable office refurbishment.
In: SASBE2006 - 2ndCIB International Conference on Smart and Sustainable Built Environments; Proceedings, Shanghai, China, [Conference or Workshop Item]

Knaack, Ulrich (2006):
The future for glass starts today : on fixings, breathing, energy.
In: Conference proceedings ISAAG 2006 : international symposium on the application of architectural glass, München, 30/10/06 → 31/10/06, [Conference or Workshop Item]

Knaack, Ulrich and Hasselbach, R. (2006):
Introduction new strategies for systems.
In: New strategies for systems, Delft, 19 May 2006 → 19 May 2006, ISSN 90-5269-344-7,
[Conference or Workshop Item]

Knaack, Ulrich and Bilow, Marcel (2006):
Pneumatische en vacuümversterkte constructies: De mogelijkheden van lucht.
In: BouwIQ, pp. 32-34, 11, (7), [Article]

Knaack, Ulrich (2006):
Namen & gezichten.
In: Dax, pp. 14-15, 2, (8), [Article]

Gugeler, J. and Gerber, H. and Schneider, Jens and Havemann, K. (2006):
Lehrter Bahnhof Berlin: Die Haupteingangsfassaden.
In: Stahlbau, Ernst & Sohn, pp. 415-427, (6), ISSN 0038-9145,
[Article]

Schneider, Jens (2006):
Tragende Verbindungen im Glasbau. Verbindungstechniken am Beispiel ausgeführter Ganzglaskonstruktionen.
In: Bauen mit Glas, Düsseldorf, VDI-Verlag, pp. 67-86, [Book Section]

2005

Schneider, Jens (2005):
150 Kilo auf Zehenspitzen. Konstruktion von Überkopfverglasungen.
In: Deutsche Bauzeitung (db), Konradin Medien GmbH, 6, ISSN 0721-1902,
[Online-Edition: https://www.db-bauzeitung.de/allgemein/150-kilo-auf-zehenspi...],
[Article]

Knaack, Ulrich and Pottgiesser, Uta and Bilow, Marcel (2005):
Book Editorship.
In: Fassade 2005: Energie - Material - Konstruktion, [Article]

Knaack, Ulrich (2005):
Material und Konstruktion.
In: Fassade 2005: energie-material-konstruktion, pp. 16-21, [Article]

Knaack, Ulrich and Pottgiesser, Uta and Bilow, Marcel (2005):
Technologietransfer in Richtung Architektur.
In: Deutsche Bau Zeitschrift, pp. 76-78, 53, (11), [Article]

Knaack, Ulrich and Klein, Tillmann (2005):
Fassadenplanung mit Systemen.
In: Deutsches Architektenblatt, pp. 59-62, 37, (12), [Article]

Schneider, Jens and Hofmann, T. and Reisinger, G. (2005):
Glass Foil-a new "glazing" possibility.
In: Glass Processing Days, the 9th International Conference on Architectural and Automotive Glas, Tampere, Finland, June 17 - 20, 2005, [Conference or Workshop Item]

Schneider, Jens (2005):
Innovative Applications of Glass in Structures.
In: Glass Processing Days, the 9th International Conference on Architectural and Automotive Glas, Tampere, Finnland, June 17 - 20, 2005, [Conference or Workshop Item]

Schneider, Jens and Siegele, Klaus (2005):
Glasecken. Konstruktion, Gestaltung, Beispiele.
München, Dt. Verlags-Anstalt, ISBN 3-421-03414-1,
[Book]

2004

Schober, Hans and Schneider, Jens (2004):
There – Not there. Structural Glass and Glass Structures.
In: Symposium on transparency in architectural and structural design, Faculty of Architecture, TU Delft, 2004, [Conference or Workshop Item]

Schober, Hans and Gerber, Hannes and Schneider, Jens (2004):
Ein Glashaus für die Therme in Badenweiler.
In: Stahlbau, Ernst & Sohn, pp. 886-892, 73, (11), ISSN 0038-9145,
DOI: 10.1002/stab.200490213,
[Article]

Schober, Hans and Schneider, Jens (2004):
Developments in Structural Glass and Glass Structures.
In: Structural Engineering International, Taylor & Francis, pp. 84-87, 14, (2), ISSN 1016-8664,
[Article]

Schneider, Jens (2004):
Glass Strength in the Borehole Area of Annealed Float Glass and Tempered Float Glass.
In: International Journal of Forming Processes (IJFP), Hermes, pp. 523-541, 7, (4), DOI: 10.3166/ijfp.7.523-541,
[Article]

2003

Schober, Hans and Schneider, Jens (2003):
Ganzglaskonstruktion Glaspool Cyberhelvetia. Glas als interaktives Medium.
In: GLAS, pp. 5-7, 04/2003, [Article]

2002

Schneider, Jens (2002):
Façade Structures with Channel Shaped Glass.
Zürich, IABSE, Melbourne, 11 - 13 September, 2002, In: IABSE Reports, 86, DOI: 10.2749/222137802796337413,
[Conference or Workshop Item]

Schneider, Jens (2002):
Gussglas mit Profil. Hochwertige Fassaden aus billigem Profilglas.
In: Deutsche Bauzeitung (db), Konradin Medien GmbH, pp. 89-96, 3, ISSN 0721-1902,
[Article]

Schneider, Jens and Bohmann, D. (2002):
Glasscheiben unter Stoßbelastung – Experimentelle und theoretische Untersuchungen für absturzsichernde Verglasungen bei weichem Stoß.
In: Bauingenieur, Springer-VDI-Verlag, pp. 581-592, 77, (12), ISSN 0005-6650,
[Article]

Schneider, Jens (2002):
Glass Strength in the Borehole Area.
In: Modeling of Glass Forming and Tempering (M.G.F.T.), Valenciennes, Presses Univ. de Valenciennes, In: 2nd International Colloquium on Modeling of Glass Forming and Tempering (M.G.F.T.), University of Valenciennes, France, 23.01.-25.01.2002, In: Valensciences, 1, [Conference or Workshop Item]

2001

Wörner, Johann-Dietrich and Schneider, Jens and Fink, A. (2001):
Glasbau.
Berlin, Heidelberg, Springer Verlag, ISBN 3540668810,
[Book]

Schneider, Jens and Wörner, Johann-Dietrich (2001):
Glass Strength of Annealed and Tempered Structural Glass in the Area of Drilled Holes.
In: Proceedings 7th Glass Processing Days 2001, Tampere, Finnland, Tamglass, In: 7th Glass Processing Days 2001, Tampere, Finnland, 18 to 21 june 2001, In: Glass Processing Days, [Conference or Workshop Item]

Schneider, Jens and Wörner, Johann-Dietrich (2001):
Impact Loading on Glass Panes by Soft Body Impact.
In: Proceedings 7th Glass Processing Days 2001, Tampere, Finland, Tamglass, In: 7th Glass Processing Days 2001, Tampere, Finland, 18 to 21 june 2001, In: Glass Processing Days, [Conference or Workshop Item]

Wörner, Johann-Dietrich and Schneider, Jens (2001):
Konstruktiver Glasbau.
In: Bauzeitung, Verlag für Architektur und technische Wissenschaften Berlin, pp. 51-54, 4, [Article]

2000

Schneider, Jens and Lanzrath, M. (2000):
Innovationen im konstruktiven Glasbau.
In: Das Architekten-Magazin, VFA-Profil, pp. 24ff, [Article]

1999

Schneider, Jens and Seegräber, G. (1999):
Interdisciplinary Teaching of Architecture and Civil Engineering at Darmstadt University of Technology.
In: 17th EAAE Conference Plymouth 1999, Plymouth UK, 1999, [Conference or Workshop Item]

Singhof, B. and Schneider, Jens (1999):
Zweigeteilter Sicherheitsstandard in den Technischen Regeln für Überkopfverglasungen?
In: Baurecht, Werner-Verlag, p. 465, 30, (5), [Article]

Schneider, Jens (1999):
Überkopfverglasungen und begehbares Glas.
In: Deutsche Bauzeitung (db), pp. 129ff, (4/99), [Article]

1998

Wörner, Johann-Dietrich and Timm, G. and Techen, Holger and Schneider, Jens (1998):
Checkliste zur bautechnischen Prüfung von Glaskonstruktionen.
In: Der Prfüfingenieur Oktober 1998, pp. 57-64, [Article]

Wörner, Johann-Dietrich and Schneider, Jens (1998):
Glas als Konstruktions- und Fassadenelement im Bauwesen.
In: VDI Gesellschaft Bautechnik, Jahrbuch 1998, Düsseldorf, VDI-Verlag GmbH, [Book Section]

Shen, Xin and Schneider, Jens (1998):
Festigkeit gebohrter Gläser.
Darmstadt, Glas im Bauwesen, Architektur und Konstruktion, In: Bericht Nr. 13, [Report]

Schneider, Jens and Wörner, Johann-Dietrich (1998):
Vergleichsstudie zwischen internationalen Bachelor- und Master-Studiengängen und den Diplom-Studiengängen Bauingenieurwesen an der TU Darmstadt und FH Darmstadt.
In: Tagungsdokumentation Bachelor und Master in den Ingenieurwissenschaften, In: Deutscher Akademischer Austauschdienst (DAAD) (Hrsg.), [Conference or Workshop Item]

Wörner, Johann-Dietrich and Shen, X. and Pfeiffer, R and Schneider, Jens (1998):
Konstruktiver Glasbau.
In: Bautechnik, Ernst & Sohn, pp. 280-293, 75, (5), DOI: 10.1002/bate.199802560,
[Article]

1997

Shen, X. and Pfeiffer, R. and Schneider, Jens (1997):
Sicherheit und Resttragfähigkeit von Überkopf-verglasungen und begehbarem Glas.
In: Institut für Statik Technische Universität Darmstadt Jahresbericht 1997, Institut für Statik Technische Universität Darmstadt, pp. 119-130, Jahresbericht 1997, (Bericht 12), [Article]

This list was generated on Thu Jul 18 01:16:31 2019 CEST.