TU Darmstadt / ULB / TUbiblio

Items in division

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | Item Type | Language | No Grouping
Jump to: A | B | C | D | E | F | G | H | K | L | M | O | P | R | S | T | W
Number of items at this level (without sub-levels): 300.

A

Apostolidi, Eftychia (2019):
Innovative Concrete Composite Planar Systems Reinforced with Perforated Steel Sheets.
Wien, Universität für Bodenkultur Wien, Department für Bautechnik und Naturgefahren, Institut für konstruktiven Ingenieurbau (IKI),
[Ph.D. Thesis]

Apostolidi, Eftychia Dritsos, Stephanos (ed.) (2019):
Masonry Buldings' Seismic Failures.
In: IABSE Bulletins Structural Engineering Documents, In: Characteristic Seismic Failures of Buildings, pp. 59-148, Zurich, Switzerland, IABSE, ISBN 978-3-85748-166-6,
[Book Section]

Apostolidi, Eftychia and Šomodíková, Martina and Strauss, Alfred and Lehký, David and Novák, Drahomir (2019):
Statistical survey of existing reinforced and pre-stressed bridge types for the AT-CZ region within the “ATCZ190 SAFEBRIDGE” Project.
In: IABSE Symposium Report, 114, In: The Evolving Metropolis, pp. 505-512,
New York, USA, International Association for Bridge and Structural Engineering (IABSE), 20th Congress of IABSE, New York City 2019: The Evolving Metropolis, New York, USA, 04.-06.09.2019, ISBN 9781510895379,
[Conference or Workshop Item]

Auer, Thomas and Knaack, Ulrich and Schneider, Jens (2017):
Proceedings of the PowerSkin Conference: January 19th 2017, Munich.
In: Powerskin Conference, München, ISBN 978-94-92516-29-9,
DOI: 518-3-161-1-10-20170620,
[Book Section]

Alter, Christian and Kolling, Stefan and Schneider, Jens (2017):
An enhanced non–local failure criterion for laminated glass under low velocity impact.
In: International Journal of Impact Engineering, 109, pp. 342-353. [Article]

Apostolidi, Eftychia and Bergmeister, Konrad and Strauss, Alfred and Winkler, Patrick and Kremitzer, Peter and Rauch, Christian and Schembera, Bernhard Balázs, György L. and Koris, Kálmán and Kopecskó, Katalin (eds.) (2017):
Innovative Perforated Steel Sheet Reinforcement: Corbel Approach.
In: Innovative Materials and Technologies for Concrete Structures: Proceedings of the fib Congress, pp. 284-291,
Tokaj, Hungary, Hungarian Group of fib, The 12th Central European Congress on Concrete Engineering, Tokaj, Hungary, 31.08.2017 - 01.09.2017, ISBN 978-963-12-9651-8,
[Conference or Workshop Item]

Apostolidi, Eftychia and Berbeister, Konrad and Hilber, Raimund and Strauss, Alfred and Zeman, Oliver and Zimmermann, Thomas and Kremnitzer, Peter and Rauch, Christian and Schembra, Bernhard Furuta, Hitoshi and Frangopol, D. M. and Akiyama, Mitsuyoshi (eds.) (2015):
Integrative monitoring measurements of perforated steel sheets.
In: Life-Cycle of Structural Systems: Design, Assessment, Maintenance and Management, pp. 908-914,
Tokyo, Japan, Taylor & Francis Group, 4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014, Tokyo, Japan, 16.-19.11.2014, ISBN 978-113800120-6,
[Conference or Workshop Item]

Apostolidi, Eftychia and Bergmeister, Konrad and Strauss, Alfred and Dritsos, Stephanos (2014):
Experimental investigation on fibre reinforced elastomeric bearings.
In: IABSE Symposium Report, 102, In: Engineering for Progress, Nature and People, pp. 2478-2484,
Madrid, Spain, International Association for Bridge and Structural Engineering (IABSE), 37th IABSE Symposium on Engineering for Progress, Nature and People, Madrid, Spain, 03.-05.09.2014, ISBN 978-385748135-2,
[Conference or Workshop Item]

Apostolidi, Eftychia and Karela, Nikolitsa and Dritsos, Stephanos (2013):
Upgrading reinforced concrete structures by adding new concrete.
In: IABSE Reports, 99, In: IABSE Conference 2013 - Assessment, Upgrading and Refurbishment of Infrastructures, pp. 1663-1670,
Rotterdam, International Association for Bridge and Structural Engineering (IABSE), 06.-08.05.2013, ISBN 978-385748123-9,
[Conference or Workshop Item]

Apostolidi, Eftychia and Karela, Nikolitsa and Dritsos, Stephanos (2012):
Bond between Old-to-New Concrete Interfaces.
In: Bond in New Materials and Under Severe Conditions, 2, In: 4th international Symposium Bond in Concrete 2012 - Bond, Anchorages, Detailing, pp. 1015-1022,
Brescia, Italy, 17.-20.06.2012, ISBN 978-88-907078-3-4,
[Conference or Workshop Item]

Auer, Thomas and Knaack, Ulrich and Techen, Holger (2008):
Imagine - materials, structure and climate.
In: Xia intelligente Architektur, 63 (01-03), pp. 54-59. Koch, ISSN 0949-2356,
[Article]

B

Bishara, Nadja and Pernigotto, Giovanni and Prada, Alessandro and Baratieri, Marco and Gasparella, Andrea (2021):
Experimental determination of the building envelope’s dynamic thermal characteristics in consideration of hygrothermal modelling – Assessment of methods and sources of uncertainty.
In: Energy & Buildings, 236, p. 110798. Elsevier, e-ISSN 1872-6178,
DOI: 10.1016/j.enbuild.2021.110798,
[Article]

Bewersdorff, David and da Silva, Carina (2019):
Grüne Fassaden vs. Überhitzung - Begrünte Fassaden als Alternative zu klassischen Fassadensystemen.
In: Glaswelt, 71 (E3276), pp. 28-29. Gertner Verlag, [Article]

Bewersdorff, David and Alexandrakis, Elena and Haake, Ines and Hickert, Sascha and Knaack, Ulrich and Koenders, Eddie and Mankel, Christoph (2018):
Bauphysik der Fassade: Prinzipien der Konstruktion.
Basel, Birkhäuser, ISBN 978-3-0356-1134-2,
[Book]

Bewersdorff, David and Alexandrakis, Elena and Haake, Ines and Hickert, Sascha and Knaack, Ulrich and Koenders, Eddie and Mankel, Christoph Knaack, Ulrich and Koenders, Eddie (eds.) (2018):
Building Physics of the Envelope: Principles of Construction.
Basel, Birkhäuser, ISBN 978-3-0356-1145-8,
[Book]

Böke, Jens and Knaack, Ulrich and Hemmerling, Marco (2018):
State-of-the-art of intelligent building envelopes in the context of intelligent technical systems.
In: Intelligent Buildings International, DOI: 10.1080/17508975.2018.1447437,
[Article]

Bishara, Nadja (2018):
Measurement of dynamic properties of building envelope materials and components - methods, tools, instruments and application.
Bozen, Italy, Free University of Bozen, Italy,
[Ph.D. Thesis]

Bishara, Nadja and Gasparella, Andrea (2018):
The effect of ambient moisture conditions on heat flux time shift and decrement factor of multi-layered walls.
In: Proceedings of the 7th International Building Physics Conference, pp. 1253-1258,
London, SAGE, 7th IPBC, Syracuse, NY, USA, September, 23 - 26, 2018, DOI: 10.14305/ibpc.2018.ms-8.06,
[Conference or Workshop Item]

Borg Costanzi, Christopher and Knaack, Ulrich and Koenders, E. A. B. and Schneider, Jens and Lange, Jörg (2017):
AM4AE: Dokumentierung der Additiven Fertigung im Bauwesen.
In: 2. Tagung des DVM-Arbeitskreises „Additiv gefertigte Bauteile und Strukturen“,
Berlin, 2. Tagung des DVM-Arbeitskreises „Additiv gefertigte Bauteile und Strukturen“, Berlin, 9. - 10. November 2017, [Conference or Workshop Item]

Borg Costanzi, Christopher and Ahmed, Z. Y. and Schipper, H. R. and Bos, F. P. and Knaack, Ulrich and Wolfs, R. J. M. Bögle, Annette and Grohmann, Manfred (eds.) (2017):
3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure.
Proceedings of the IASS Annual Symposium 2017, Hamburg, Germany, 25.-28.09.2017, [Conference or Workshop Item]

Bishara, Nadja and Gasparella, Andrea (2017):
CFD modelling of forced convection at a building component surface and coupling to dynamic HAM simulation – assessment and evaluation of methods and accuracy.
In: Energy Procedia, 132, pp. 855-860. Elsevier, e-ISSN 1876-6102,
DOI: 10.1016/j.egypro.2017.09.673,
[Article]

Becker, Matthias and Traiser, Birgit and Pullamthara, Jiny Jose and Schill, Florian and Schneider, Jens and Firus, Andrei (2016):
Messung und Identifikation dynamischer Strukturparameter mittels terrestrischer Mikrowelleninterferometrie.
Berlin, Bundesanstalt für Materialforschung und- prüfung, Messen im Bauwesen 2016: Erhalt der Bauwerke unserer Verkehrs-Infrastruktur, Berlin, 08.11.2016, [Conference or Workshop Item]

Bewersdorff, David and Müller, N. and Pfnür, A. and Simsch, G. (2016):
Entwicklung Systemischer Instrumente zur Nachhaltigkeitsbewertung energetischer Gebäudesanierungen.
1. Tag der Interdisziplinarität, Fif TU Darmstadt, 28.1.2016, [Conference or Workshop Item]

Bishara, Nadja and Prada, Alessandro and Pernigotto, Giovanni and Baratieri, Marco and Gasparella, Andrea (2016):
Analysis of the measurements reliability in dynamic test of the opaque envelope.
p. 225, Purdue, USA, Curran Associates, Inc., 4th International High Performance Buildings Conference at Purdue, West Lafayette, Indiana, July 11 - 14, 2016, ISBN 978-1-5108-2874-2,
[Conference or Workshop Item]

Bishara, Nadja and Schulz, Tino and Gecks, Jens and Plagge, Rudolf and Wehsener, Jörg (2016):
Thermal optimization and performance analysis of an innovative wooden radiant heating system made for room temperature control—Laboratory and numerical investigation of prototypes.
In: Energy and Buildings, 138, pp. 569-578. DOI: 10.1016/j.enbuild.2016.12.091,
[Article]

Bishara, Nadja and Plagge, Rudolf (2015):
Experimental investigation of a new solid wood panel for room temperature control - Analysis of the cooling performance.
In: Proceedings of International Conference CISBAT 2015: Future Buildings and Districts - Sustainability from Nano to Urban Scale, pp. 101-106,
Lausanne, Switzerland, LESO-PB, EPFL, CISBAT 2015, Lausanne Switzerland, September 9-11th, 2015, DOI: 10.5075/epfl-cisbat2015-101-106,
[Conference or Workshop Item]

Bishara, Nadja and Vogelsang, Stefan and Plagge, Rudolf (2015):
Numerical simulation of the hygrothermal behavior of a new solid wood panel for room temperature control – Calibration of the heating curve.
In: Energy Procedia, pp. 176-182. Elsevier, ISSN 1876-6102,
DOI: 10.1016/j.egypro.2015.11.136,
[Article]

Bewersdorff, David and Simsch, Gerd (2014):
Energetische Sanierung im Wohnungsbu - Effiziente Behaglichkeit.
29, In: Darmstadt Concrete, pp. 25-26, [Book Section]

Bewersdorff, David and Simsch, Gerd (2014):
Energieeffizienz und Behaglichkeit von Bestandsbauten (1920-2000) im Kontext normativer und gesetzlicher Regelungen.
29, In: Darmstadt Concrete, pp. 23-24, [Book Section]

Bishara, Nadja and Plagge, Rudolf (2014):
Development of a solid wood panel for heating and cooling of floor, wall and ceiling constructions.
In: NSB 2014: 10th Nordic Symposium on Building Physics: Full Papers, pp. 892-899,
Lund, Schweden, FuktCentrum, 10th Nordic Symposium on Building Physics, Lund, Schweden, 15 - 19 June 2014, ISBN 978-91-88722-53-9,
[Conference or Workshop Item]

Badnarnah, L. and Kadri, U. and Knaack, Ulrich (2008):
A bio-inspired ventilating envelope optimized by air-flow-simulations.
In: Proceedings of the Conference on Sustainable Building SB08, pp. 230-237,
The world sustainable building conference 2008, Melbourne, Australia, Melbourne, 21.11.2008-25.11.2008, [Conference or Workshop Item]

Badarnah, L. and Knaack, Ulrich (2008):
Organizational features in leaves for application in shading systems for building envelopes.
pp. 87-96, Design and nature IV : comparing design in nature with sciences and engineering, Algarve Portugal, 24/06/08 → 26/06/08, [Conference or Workshop Item]

Bilow, Marcel and Klein, Tillmann and Knaack, Ulrich (2007):
Deflateable structures transferred into façade constructions.
pp. 181-184, III International conference on textile composited and inflatable structures - Barcelona, 17 Sep 2007 → 19 Sep 2007, [Conference or Workshop Item]

Badermah, L. and Knaack, Ulrich and Ebbert, Timo (2007):
Bionic breathing skin for buildings.
In: Portugal SB07 sustauinable construction materials and practices, challenge of the industry for the new millenium, pp. 612-619,
Portugal SB'07 Conference, sustainable constructing, materials and practices - Lisbon, Lissabon, 12 Sep 2007 → 14 Sep 2007, [Conference or Workshop Item]

C

Conci, Mira and Konstantinou, T. and van den Dobbelsteen, A. A. J. F. and Schneider, Jens (2019):
Trade-off between the economic and environmental impact of different decarbonisation strategies for residential buildings.
In: Building and Environment, 155, pp. 137-144. Elsevier, ISSN 0360-1323,
DOI: 10.1016/j.buildenv.2019.03.051,
[Article]

Castillo Ruano, Pablo and Apostolidi, Eftychia and Strauss, Alfred (2018):
Reliability based optimization of fiber reinforced elastomeric bearings.
In: Beton- und Stahlbetonbau, 113 (S2), pp. 103-109. Ernst & Sohn, ISSN 0005-9900,
DOI: 10.1002/best.201800058,
[Article]

Cruz, P. J. S. and Knaack, Ulrich and Figueiredo, B. and de Witte, Dennis (2017):
Ceramic 3D printing: The future of brick architecture.
In: Proceedings of the IASS Annual Symposia, pp. 1-10,
Hamburg, International Association for Shell and Spatial Structures (IASS), IASS 2017 Hamburg Symposium: Digital Technologies for Spatial Structures, Hamburg, Germany, 25-28 September 2017, [Conference or Workshop Item]

Castillo Ruano, Pablo and Apostolidi, Eftychia and Strauss, Alfred Bakker, J. and Frangopol, D. M. and Van Breugel, Klaas (eds.) (2016):
Numerical investigations on circular fiber reinforced elastomeric bearings.
In: Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure, 1. Edition, pp. 2420-2425,
Delft, The Netherlands, Taylor & Francis Group, Fifth International Symposium on Life-Cycle Civil Engineering (IALCCE 2016), Delft, The Netherlands, 16.-19.10.2016, ISBN 9781315375175,
DOI: 10.1201/9781315375175,
[Conference or Workshop Item]

Conci, Mira (2016):
Towards a sustainable future.
In: RuMoer, 62, ISSN 1567-7699,
[Article]

Conci, Mira and Schneider, Jens (2016):
SWIVT as a case-study on energy management platforms supporting design, planning and operation of smart districts.
9th International Conference on Improving Energy Efficiency in Commercial Buildings and Smart Communities, Frankfurt am Main, 16.-18.03.2016, [Conference or Workshop Item]

Castillo Ruano, Pablo and Pürgstaller, Andreas and Apostolidi, Eftychia and Bergmeister, Konrad and Strauss, Alfred (2015):
Innovative fiber reinforced elastomeric isolation devices.
In: IABSE Symposium Report, 105, In: Structural Engineering: Providing Solutions to Global Challenges, pp. 1637-1644,
Geneva, Switzerland, IABSE Conference, Geneva 2015, Geneva, Switzerland, 23.-25.09.2015, ISBN 978-1-5108-2002-9,
[Conference or Workshop Item]

D

Drass, Michael and Berthold, Hagen and Kraus, Michael and Müller-Braun, Steffen (2020):
Semantic segmentation with deep learning: detection of cracks at the cut edge of glass.
In: Glass Structures & Engineering, DOI: 10.1007/s40940-020-00133-7,
[Article]

Drass, Michael and Schneider, Jens and Kolling, Stefan (2018):
Novel volumetric Helmholtz free energy function accounting for isotropic cavitation at finite strains.
In: Materials & Design, 138, pp. 71-89. Elsevier, ISSN 0264-1275,
DOI: 10.1016/j.matdes.2017.10.059,
[Article]

Drass, Michael and Schneider, Jens and Kolling, Stefan (2018):
Damage Effects of Adhesives in Modern Glass Façades: A Micro-Mechanically Motivated Volumetric Damage Model for Poro-Hyperelastic Materials.
In: International Journal of Mechanics and Materials in Design, 14 (4), pp. 591-616. Springer, ISSN 1569-1713,
DOI: 10.1007/s10999-017-9392-3,
[Article]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2018):
Adhesive connections in glass structures— part II: material parameter identification on thin structural silicone.
In: Glass Structures & Engineering, 3 (1), pp. 55-74. Springer, ISSN 2363-5142,
DOI: 10.1007/s40940-017-0048-3,
[Article]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2018):
Adhesive connections in glass structures— part I: experiments and analytics on thin structural silicone.
In: Glass Structures & Engineering, 3 (1), pp. 39-54. DOI: 10.1007/s40940-017-0046-5,
[Article]

Drass, Michael and Kolupaev, V. A. and Rosendahl, Philipp Laurens and Schneider, Jens and Becker, Wilfried (2018):
Generalized cavitation criterion for poro-hyperelastic material.
In: J. Schneider, N. Kiziltoprak (Hrsg.): Baustatik-Baupraxis e. V. Forschungskolloquium., pp. 20-23,
Springer Fachmedien Wiesbaden GmbH, ein Teil von Springer Nature 2018, Forschungskolloquium 2018 Grasellenbach, Grasellenbach, 13-14 April 2018, DOI: 10.1007/978-3-658-23627-4_6,
[Conference or Workshop Item]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2018):
Adhesive connections in glass structures - part I: experiments and analytics on thin structural silicone.
In: Glass Structures and Engineering, 3, pp. 39-54. Springer, ISSN 2363-5142,
DOI: 10.1007/s40940-017-0046-5,
[Article]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2017):
Novel volumetric Helmholtz free energy function accounting for isotropic cavitation at finite strains.
In: Materials & Design, 138, pp. 71-89. Elsevier, ISSN 0264-1275,
DOI: 10.1016/j.matdes.2017.10.059,
[Article]

Drass, Michael and Schwind, Gregor and Schneider, Jens and Kolling, Stefan (2017):
Adhesive connections in glass structures—part II: material parameter identification on thin structural silicone.
In: Glass Structures & Engineering, 3, pp. 55-74. Springer, ISSN 2363-5142,
DOI: 10.1007/s40940-017-0048-3,
[Article]

Drass, Michael and Schuster, Miriam and Schneider, Jens (2017):
Comparison of unconventional testing methods for mechanical characterization of polymeric materials in modern glass structures.
Vancouver Canada, 39th IABSE Symposium – Engineering the Future, Vancouver Canada, 21.-23.09.2017, [Conference or Workshop Item]

De Witte, Dennis and de Klijn-Chevalerias, M. L. and Loonen, R. C. G. M. and Hensen, J. L. M. and Knaack, Ulrich and Zimmermann, G. (2017):
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design & Engineering, 5 (1), pp. 107-117. TU Delft Open, ISSN 2213-3038,
DOI: 10.7480/jfde.2017.1.1430,
[Article]

de Witte, Dennis and de Klijn-Chevalerias, M. L. (2017):
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
p. 319, PowerSkin Conference - Munich, Germany, München, 19.01.2017, [Conference or Workshop Item]

de Witte, Dennis and de Klijn-Chevalerias, M. L. and Loonen, R. C. G. M. and Hensen, J. L. M. and Knaack, Ulrich and Zimmermann, G. (2017):
Convective Concrete - Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design and Engineering,, 5 (1), pp. 107-117. [Article]

Drass, Michael and Schneider, Jens and Kelleter, Christian and Sobek, Werner and Haase, Walter (2016):
Aspekte experimenteller und numerischer Untersuchungen von Klemmhalterungen im Glasbau.
In: Stahlbau, 85 (S1 (Glasbau 2016)), pp. 183-195. Ernst & Sohn, ISSN 0038-9145,
DOI: 10.1002/stab.201690157,
[Article]

Drass, Michael and Schneider, Jens (2016):
Constitutive Modeling of Transparent Structural Silicone Adhesive–TSSA.
14. Darmstädter Kunststofftag, Hochschule Darmstadt (h _ da) Institut für Kunststofftechnik Darmstadt (ikd) Darmstadt, 24.06.2016, [Conference or Workshop Item]

Drass, Michael and Schneider, Jens (2016):
On the mechanical behavior of transparent structural silicone adhesive – TSSA.
In: Insights andInnovations in Structural Engineering, Mechanics and Computation,
London, Taylor & Francis, Sixth International Conference on Structural Engineering, Mechanics and Computation – SEMC 2016, Capetown, South Africa, 2016-09-05 - 2016-09-07, DOI: 10.1201/9781315641645-74,
[Conference or Workshop Item]

Drass, Michael and Schneider, Jens (2016):
Constitutive Modeling of Transparent Structural Silicone Adhesive – TSS.
14. Darmstädter Kunststofftag, Darmstadt, [Conference or Workshop Item]

Dritsos, Stephanos and Apostolidi, Eftychia and Karela, Nikolitsa Strauss, Alfred and Frangopol, Dan and Bergmeister, Konrad (eds.) (2013):
Strategies and Methods to Increase the Life Cycle of RC Buildings in Seismic Prone Areas.
In: Life Cycle and Sustainability of Civil Infrastructure Systems - IALCCE 2012, 3th International Symposium on Life-Cycle Civil Engineering, pp. 1152-1158,
Vienna, Austria, Taylor & Francis Group, 03.-06.10.2012, ISBN 978-041562126-7,
[Conference or Workshop Item]

Drass, Michael and Schober, Kay-Uwe (2012):
Grenzflächenaktivierung eingeklebter Stahlstangen.
2. Trierer Holzbaugespräch, Trier, Germany, 11.05.2012, [Conference or Workshop Item]

E

Ensslen, Frank and Müller-Braun, Steffen (2017):
Kantenfestigkeit von Floatglas in Abhängigkeit von wesentlichen Schneidprozessparametern.
In: Glasbau, 2017, pp. 219-232. Ernst & Sohn, Berlin, [Article]

Ensslen, Frank and Müller-Braun, Steffen (2017):
Kantenfestigkeit von Floatglas in Abhängigkeit von wesentlichen Schneidprozessparametern.
In: Glasbau 2017, pp. 219-232, Berlin, Ernst & Sohn, ISBN 978-3-433-03171-1,
[Book Section]

Ensslen, F. and Schneider, Jens and Schula, S. (2010):
Produktion, Eigenschaften und Tragverhalten von thermisch gebogenen Floatgläsern für das Bauwesen – Erstprüfung und werkseigene Produktionskontrolle im Rahmen des Zulassungsverfahrens.
In: Stahlbau Spezial 2010 – Konstruktiver Glasbau, pp. 46-51. Ernst & Sohn, [Article]

Ebbert, Timo and Knaack, Ulrich (2008):
Strategies for the refurbishment of office facades - a case study.
In: Proceedings SB08 World sustainable building conference, pp. 1-8,
Melbourne, World sustainable building conference 2008, Melbourne, 21 Sep 2008 → 25 Sep 2008, [Conference or Workshop Item]

Ebbert, T. and Knaack, Ulrich (2007):
An adaptable facade concept for sustainable office refurbishment.
pp. 1-8, Proceedings of building stock activation 2007, Tokyo, [Conference or Workshop Item]

F

Firus, Andrei and Kemmler, Roman and Berthold, Hagen and Lorenzen, Steven and Schneider, Jens Papadrakakis, Manolis and Fragiadakis, Michalis and Papadimitriou, Costas (eds.) (2020):
A novel method for indirect measurement of groundreaction forces on vibrating structures.
1, In: EURODYN 2020 XI International Conference on Structural Dynamics, First Edition, pp. 1883-1895,
Athens, Greece, Institute of Structural Analysis and Antiseismic Researc, EURODYN 2020 XI International Conference on Structural Dynamics, Athens, 23-26 November 2020, ISBN 978-618-85072-0-3,
[Conference or Workshop Item]

Firus, Andrei and Berthold, Hagen and Schneider, Jens and Seyfarth, André and Albinger, Max Powers, Nigel (ed.) (2018):
Parameter identification of a biodynamic walking model for human-structure interaction.
In: Maintenance, safety, risk, management and life-cycle performance of bridges : proceedings of the 9th International Conference on Bridge Maintenance, p. 163,
Boca Raton, London, New York, Leiden, CRC Press, 9th International Conference on Bridge Maintenance (IABMAS 2018), Melbourne, Australia, 9-13 July 2018, ISBN 9781138730458,
[Conference or Workshop Item]

Firus, Andrei and Berthold, Hagen and Schneider, Jens and Grunert, Günther (2018):
Untersuchungen zum dynamischen Verhalten einer Eisenbahnbrücke bei Anregung durch den neuen ICE 4.
In: VDI-Berichte, 2321, In: Baudynamik 2018, pp. 233-248,
Würzburg, VDI-Verlag, 6. VDI-Fachtagung Baudynamik 2018, Würzburg, 17. und 18. April 2018, ISSN 0083-5560, ISBN 978-3-18-092321-5,
[Conference or Workshop Item]

Firus, Andrei and Schneider, Jens and Becker, Matthias and Grunert, Günther and Pullamthara, Jiny Jose (2016):
Dynamische Verformungsmessungen an Eisenbahnbrücken mittels Mikrowelleninterferometrie. Teil 1: Messverfahren.
In: Bautechnik, 93 (10), pp. 700-710. Ernst & Sohn, ISSN 0932-8351,
DOI: 10.1002/bate.201600050,
[Article]

Franz, Johannes (2016):
Untersuchungen zur Resttragfähigkeit von gebrochenen Verglasungen : Investigation of the residual load-bearing behaviour of fractured glazing.
In: Mechanik, Werkstoffe und Konstruktion im Bauwesen ; 45, Berlin, Springer, TU Darmstadt, ISBN 978-3-662-48555-2,
[Ph.D. Thesis]

Firus, Andrei and Schneider, Jens and Becker, Matthias and Pullamthara, Jiny Jose (2016):
Validation of microwave interferometry measurements for applications in railway bridge dynamics.
German-Japanese Bridge Symposium GJBS 2016, Osaka, Japan, 30.-31.08.2016, [Conference or Workshop Item]

Franz, Johannes and Schneider, Jens and Maier, Andreas Weller, Bernhard and Schneider, Jens (eds.) (2016):
Insulating glazing with integrated functions – case study of the ETA-factory.
In: Engineered Transparency 2016: Glass in Architecture and Structural Engineering, pp. 53-61, Berlin, Ernst & Sohn, ISBN 978-3-433-03187-2,
[Book Section]

Firus, Andrei and Schneider, Jens and Francke, Wolfgang and Kunkel, B. (2016):
TU Darmstadt HUMVIB-Bridge: Investigation of the human-structure interaction on a full-scale experimental pedestrian bridge.
In: BULLETIN OF THE TRANSILVANIA UNIVERSITY OF BRASOV VOL. 9(58), special issue 1-Series 1, In: Proceedings of the International Scientific Conference CIBv, pp. 63-72,
Brasov, THE TRANSILVANIA UNIVERSITY OF BRASOV, Brasov, Romania, 28-29 October 2016, [Conference or Workshop Item]

Firus, Andrei and Kramer, A. and Werkle, Horst and Francke, Wolfgang (2015):
Schwingungsantwort einer Decke infolge von vertikalen beidbeinigen Sprüngen in der Sprungkraftdiagnostik.
In: VDI Berichte 2244, pp. 447-458,
5. VDI-Fachtagung Baudynamik, Kassel, [Conference or Workshop Item]

Firus, Andrei and Werkle, Horst and Francke, Wolfgang and Clausner, C. (2014):
Evaluation of footfall-induced vibrations on thier importance in a biomechanics laboratory.
pp. 263-272, International Scientific Conference CIBv, Brasov, Romania, 7.-8.11.2014, [Conference or Workshop Item]

Franz, Johannes and Schneider, Jens and Kuntsche, Johannes K. and Hilcken, Jonas (2014):
Untersuchungen zum Resttragverhalten von Verbundglas: Through-Cracked-Tensile-Test.
In: Glasbau 2014, pp. 241-252, Berlin, Ernst&Sohn, ISBN 978-3-433-03071-4,
[Book Section]

Franz, Johannes and Schneider, Jens and Kuntsche, Johannes K. and Hilcken, Jonas (2014):
Untersuchungen zum Resttragverhalten von Verbundglas: Through-Cracked-Tensile Test.
In: Stahlbau, 83 (S1), pp. 241-252. ISSN 0038-9145, 1437-1049,
[Article]

Franz, Johannes and Kuntsche, Johannes K. (2013):
Damit die Folie sicher hält - Neue Prüfmethoden für Glaslaminate.
In: Glaswelt, (12), pp. 22-23. Gentner, ISSN 0017-1107,
[Article]

G

Grammou, N. and Schneider, Jens Bletzinger, K. and Fisch, R. and Gebbeken, N. (eds.) (2014):
Analyse zu Zusammenhängen zwischen Schnee, Wind und Temperatur bei Schnee-Ereignissen für ausgewählte Standorte in Deutschland.
In: Baustatik- Baupraxis 12, pp. 29-36, München, TU München / UniBw München, [Book Section]

Garrecht, H. and Schneider, Jens and Ott, A. and Franz, J. and Heinsdorff, M. (2010):
Steigerung der Tragfähigkeit für das Deutsch-Chinesische Haus der EXPO 2010 durch Optimierung des Bambus-Beton-Verbundes.
In: Bauingenieur, (85), pp. 353-360. Springer-VDI-Verlag, [Article]

Gugeler, J. and Gerber, H. and Schneider, Jens and Havemann, K. (2006):
Lehrter Bahnhof Berlin: Die Haupteingangsfassaden.
In: Stahlbau, (6), pp. 415-427. Ernst & Sohn, ISSN 0038-9145,
[Article]

H

Hoces, A.I. Prieto and Knaack, Ulrich and Auer, Thomas and Klein, Tillmann (2017):
Solar façades: Main barriers for widespread façade integration of solar technologies.
p. 289, PowerSkin Conference - Munich, Germany, München, 19.01.2017, [Conference or Workshop Item]

Hoces, Alejandro Prieto and Knaack, Ulrich and Auer, Thomas and Klein, Tillmann (2017):
Solar coolfacades: Framework for the integration of solar cooling technologies in the building envelope.
In: Energy, 137, pp. 353-368. DOI: 10.1016/j.energy.2017.04.141,
[Article]

Hoces, Alejandro Prieto and Knaack, Ulrich and Auer, Thomas and Klein, Tillmann (2017):
Solar façades: Main barriers for widespread façade integration of solar technologies.
In: Journal of Facade Design & Engineering, 5 (1), pp. 51-62. IOS Press, ISSN 2213-3038,
DOI: 10.7480/jfde.2017.1.1398,
[Article]

Hoces, Alejandro Prieto and Knaack, Ulrich and Auer, Thomas and Klein, Tillmann (2016):
Coolfacade: Design driven categorisation of solar cooling technologies for facade integration possibilities.
15th International Conference on Sustainable Energy Technologies – SET 2016 - NUS - National University of Singapore, Singapore, Singapore, 19 Jul 2016 → 22 Jul 2016, [Conference or Workshop Item]

Henriksen, Thomas and Lo, Stephen and Knaack, Ulrich (2016):
A new method to advance complex geometry thin-walled glass fibre reinforced concrete elements.
In: Journal of building engineering, 6, pp. 243-251. DOI: 10.1016/j.jobe.2016.04.002,
[Article]

Henriksen, Thomas and Lo, Stephen and Knaack, Ulrich (2016):
The impact of a new mould system as part of a novel manufacturing process for complex geometry thin-walled GFRC.
In: Architectural Engineering and Design Management, 12 (3), pp. 231-249. Taylor & Francis, DOI: 10.1080/17452007.2016.1159540,
[Article]

Hilcken, Jonas (2015):
Zyklische Ermüdung von thermisch entspanntem und thermisch vorgespanntem Kalk-Natron-Silikatglas = Cyclic fatigue of annealed and tempered soda-lime glass.
In: Mechanik, Werkstoffe und Konstruktionen im Bauwesen, 44, Berlin, Springer, TU Darmstadt, ISBN 978-3-662-48352-7,
[Ph.D. Thesis]

Hilcken, Jonas and Boxheimer, Kaja (2014):
Ermüdung von Floatglas, TVG und ESG bei zyklischer Belastung.
In: Glaswelt 2014, 67, [Article]

Hilcken, J. and Boxheimer, Kaja and Schneider, Jens and Wörner, Johann-Dietrich and Franz, J. (2014):
Untersuchung der zyklischen Ermüdung von thermisch vorgespanntem Kalk-Natron-Silikatglas.
In: Glasbau 2014, pp. 253-266, Belrin, Ernst & Sohn, ISBN 978-3-433-03071-4,
[Book Section]

Hilcken, J. and Boxheimer, Kaja and Schneider, Jens and Wörner, Johann-Dietrich (2013):
Untersuchungen zum Ermüdungsverhalten von gezielt vorgeschädigtem Floatglas aus Kalk-Natron-Silikatglas bei zyklischer Belastung.
In: Glasbau 2013, pp. 247-263,
Berlin, Ernst & Sohn, [Conference or Workshop Item]

Hilcken, Jonas and Schneider, Jens and Boxheimer, Kaja (2013):
Dauerschwingfestigkeit von Glas.
pp. 445-449, 2. Darmstädter Ingenieurkongress 2013, Darmstadt, [Conference or Workshop Item]

Hemmerling, M. and Knaack, Ulrich and Schulz, J. U. (2008):
Complexity in digital architectural design.
pp. 89-94, eCAADe 26 Architecture 'incomputro' Integrating methods and techniques, [Conference or Workshop Item]

K

Kuntsche, Johannes K. and Schuster, Miriam and Schneider, Jens (2019):
Engineering design of laminated safety glass considering the shear coupling: a review.
In: Glass Structures & Engineering, 4 (2), pp. 209-228. ISSN 2363-5150,
DOI: 10.1007/s40940-019-00097-3,
[Article]

Kraus, Michael and Schuster, Miriam and Botz, Martin and Schneider, Jens and Siebert, Geralt (2019):
Zur Normung thermomechanischer Untersuchungen an polymeren Verbundglaszwischenschichten.
In: ce/papers, 3 (1), pp. 94-106. ISSN 2509-7075,
DOI: 10.1002/cepa.1003,
[Article]

Kiziltoprak, Nihat and Kanli, Evgenia and Schneider, Jens and Knaack, Ulrich and Bach, Rebecca (2019):
Load capacity testing method for non-conventional nodes joining linear structural paper components.
In: Structures and Architecture – Bridging the Gap and Crossing Borders : Proceedings of the Fourth International Conference on Structures and Architecture (ICSA 2019), July 24-26, 2019, Lisbon, Portugal, pp. 1107-1114,
London, CRC Press, ISBN 9781315229126,
DOI: 10.1201/9781315229126,
[Conference or Workshop Item]

Knaack, Ulrich and Linke, Hans-Joachim (2018):
Facades within sustainable urban development.
Workshop „Facades within sustainable urban development“, Ho Chi Minh City Vietnam, 02.07.2018, [Conference or Workshop Item]

Krimm, Jochen and Techen, Holger and Knaack, Ulrich (2018):
Update urban facades design for quieter outdoor spaces.
pp. 102-109, PowerSkin Conference - Munich, Germany, München, 19.01.2017, [Conference or Workshop Item]

Kuntsche, Johannes K. and Schuster, Miriam and Schneider, Jens (2018):
Bemessung von Verbundsicherheitsglas unter Berücksichtigung des Schubverbunds durch polymere Zwischenschichten.
In: Der Bauingenieur, 93, pp. 28-36. Springer-VDI-Verlag GmbH & Co. KG, ISSN 0005-6650,
[Article]

Kraus, Michael and Schuster, Miriam and Botz, Martin and Schneider, Jens and Siebert, Geralt (2018):
Thermorheologische Untersuchungen der Verbundglaszwischenschichten PVB und EVA.
Glasbau 2018, Dresden, [Conference or Workshop Item]

Knaack, Ulrich and Pottgiesser, Uta (2017):
efnMOBILE 2.0 / Efficient Envelopes.
In: efnMOBILE 2.0 / Efficient Envelopes, ISBN 978-94-92516-87-9,
[Book Section]

Knaack, Ulrich (2017):
Fassadentechnik Systeme, Konstruktion und Innovation: Akademieseminare.
Akademie der Architektenkammer, [Book]

Knaack, Ulrich (2017):
Next steps on the facade roadmap.
pp. 6-7, ICBEST 2017: International Conference on Building Envelope Systems and Technologies, Istanbul, Turkey, 15 May 2017 → 18 May 2017, [Conference or Workshop Item]

Knaack, Ulrich and Mohsen, Alamir and De Witte, Dennis (2017):
Concepts and samples for force and function optimisation of steel knots and ceramic wall components.
Deutscher Verband fur Materialforschung und – prüfung, [Conference or Workshop Item]

Knaack, Ulrich (2017):
Bauen mit Glas: Gebäudehülle - quo vadis?
In: XIA Intelligente Architektur, 07-09/17 (100), pp. 90-91. [Article]

Knaack, Ulrich (2017):
The Total Envelope.
In: Diesseits der Form Architektur auf dem Weg zur Energiewende - xia Intelligente Architektur, 100 Beiträge aus 100 Ausgaben, 1994 - 2017, pp. 198-207, Verlagsanstalt Alexander Koch GmbH, ISBN 978-3874220026,
[Book Section]

Kamerling, Wim and Veer, Fred and Schnater, Frank and Knaack, Ulrich (2017):
Bouwsysteem Cellenbeton-Nobel: Verslag proeven trek/schuif/wringing.
Delft University of Technology, [Report]

Knaack, Ulrich and Michel, M. (2017):
Adaptive structural Material for Reconfigurable Freeform Surfaces.
Proceedings of the IASS Annual Symposium 2017, 25 Sep 2017-28 Sep 2017, [Conference or Workshop Item]

Kultur, Sinem and Knaack, Ulrich and Türkeri, N. (2017):
Performance check tool for facade design.
ICBEST Istanbul: International Conference on Building Envelope Systems and Technologies, [Conference or Workshop Item]

Knaack, Ulrich and Klein, Tillmann and Konstantinou, Thaleia (2017):
The Future Envelope #11: Next Business.
In: The Future Envelope #11: Next Business, [Book Section]

Krimm, Jochen and Knaack, Ulrich and Techen, Holger (2017):
Updated urban facade design for quieter outdoor spaces.
In: Journal of Facade Design and Engineering, 5 (1), pp. 63-75. DOI: 10.7480/jfde.2017.1.1422,
[Article]

Kwon, M. and Remoy, H. T. and van den Dobbelsteen, A. A. J. F. and Knaack, Ulrich (2017):
User-focused design factors of workspace for nearly zero energy office renovation: findings from literature review.
In: Reviewed papers of the 24th Annual Conference of the European Real Estate Society (ERES 2017),
ERES 2017: 24th Annual Conference of the European Real Estate Society, TU Delft, Delft, Netherlands, 28 Jun 2017 → 1 Jul 2017, DOI: https://pure.tudelft.nl/portal/files/30171194/User_focused_design_factors_of_workspace_for_nearly_zero_ERES_FullPaper_3.pdf,
[Conference or Workshop Item]

Kwon, M. and Remoy, H. T. and van den Dobbelsteen, A. A. J. F. and Knaack, Ulrich (2017):
User-focused design measurement factors of workspace for nearly zero energy office renovation: findings from literature review.
ERES 2017: 24th Annual Conference of the European Real Estate Society, [Conference or Workshop Item]

Kraus, Michael and Schuster, Miriam and Kuntsche, Johannes K. and Siebert, Geralt and Schneider, Jens (2017):
Parameter identification methods for visco and hyperelastic material models.
Glass Performance Days, Tampere, [Conference or Workshop Item]

Krimm, Jochen and Techen, Holger and Knaack, Ulrich (2016):
Tuning acoustical facade designs aiming for a controlled influence on the urban soundscape.
pp. 256-263, 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, Hamburg, Germany, 21/08/16 → 24/08/16, [Conference or Workshop Item]

Karagianni, L. and Turrin, Michela and Knaack, Ulrich and Hordijk, G. J. Ramtin, A. and Chromis, A. and Hanna, S. and Turrin, Michela (eds.) (2016):
Additive manufacturing for daylight : Towards a customized shading device.
In: Proceedings of the Symposium on Simulation for Architecture and Urban Design, pp. 69-76,
London, Symposium on Simulation for Architecture and Urban Design, London, May, 16-18, 2016, [Conference or Workshop Item]

Knaack, Ulrich and Pottgiesser, Uta and Böke, Jens (2016):
Imagine 09 Prototyping efn mobile.
In: Imagine, Rotterdam, nai010 publishers, ISBN 978-9462082915,
[Book]

Knaack, Ulrich and Schneider, Jens (2016):
Institut für Statik und Konstruktion.
In: Bau- und Umweltingenieurwissenschaften, Information zu Lehre, Forschung und Entwicklung am Fachbereich 13, pp. 94-97. [Article]

Kuntsche, Johannes K. and Schneider, Jens and Schuster, Miriam and Langer, S. (2015):
Viscoelastic properties of laminated glass interlayers – theory and experiments.
Glass Performance Days 2015, Tampere, Finland, 23.-26.06.2015, [Conference or Workshop Item]

Kuntsche, Johannes K. (2015):
Mechanisches Verhalten von Verbundglas unter zeitabhängiger Belastung und Explosionsbeanspruchung.
In: Mechanik, Werkstoffe und Konstruktionen im Bauwesen, 46, Berlin, Springer, TU Darmstadt Institut für Statik und Konstruktion, ISBN 9783662488300,
[Ph.D. Thesis]

Kuntsche, Johannes K. and Franz, Johannes and Schneider, Jens (2015):
Untersuchungen zum Resttragverhalten von Verbundglas.
In: Glasbau 2015, pp. 383-395, Berlin, Ernst&Sohn, ISBN 978-3-433-03101-8,
[Book Section]

Kuntsche, Johannes K. and Schneider, Jens (2014):
Mechanical behaviour of polymer interlayers in explosion resistant glazing.
In: Challenging Glass 4 & COST Action TU 0905 Final Conference, pp. 447-454,
Lausanne, [Conference or Workshop Item]

Kuntsche, Johannes K. and Schneider, Jens (2014):
Experimental and numerical investigation of the mechanical behavior of explosion resistant glazing.
In: Engineered Transparency 2014, pp. 174-184,
[Conference or Workshop Item]

Kuntsche, Johannes K. and Schneider, Jens (2013):
Explosion resistant glazing - experimental tests and numerical simulation.
In: Glass Performance Days Finland 2013, pp. 173-177, Tampere, Finland, [Book Section]

Kuntsche, Johannes K. and Schneider, Jens and Kolling, Stefan (2013):
Mechanische Eigenschaften von Glas-Verbundmaterialien unter hohen Verzerrungsraten.
In: Bauwesen, In: 2. Darmstädter Ingenieurkongress Bau und Umwelt, pp. 401-405, Darmstadt, ISBN 978-3-8440-1747-2,
[Book Section]

Kolling, Stefan and Schneider, Jens and Gebbeken, Norbert and Larcher, Martin and Alter, Christian and Kuntsche, Johannes K. (2012):
Deformations- und Bruchverhalten von Verbundsicherheitsglas unter dynamischer Beanspruchung.
3, In: Stahlbau, pp. 219-225, Berlin, Ernst&Sohn, [Book Section]

Kleuderlein, J. and Schneider, Jens (2010):
Flächige und punktuelle Fügetechniken bei Gläsern.
In: deutsche bauzeitung db, (Nr. 11), pp. 68-73. Deutsche Verlags-Anstalt, ISSN 0721-1902,
[Article]

Knaack, Ulrich and Bilow, Marcel and Strauss, Holger (2010):
Rapids – Layered fabrication technologies for facades and building construction.
In: imagine, 4, Rotterdam, 010 Publishers, ISBN 9064506760, 9789064506765,
[Book]

Kooymans, J. and Techen, H. and Schneider, Jens Bos, F. and Louter, C. and Veer, F. (eds.) (2008):
Long Span Glass Fin Design.
In: Challenging Glass - Proceedings International Conference, pp. 89-99,
Delft University Press, Conference on Architectural and Structural Applications of Glass, TU Delft, 22.-23.05.2008, [Conference or Workshop Item]

Knaack, Ulrich (2008):
Experimenteren, testen en bouwen.
In: Stedebouw en Architectuur, 25 (8), pp. 38-39. [Article]

Knaack, Ulrich and Bilow, Marcel (2008):
Glasfaserbeton - neue Ansätze in der Verwendung von Glas.
In: Glas: Architektur und Technik, 14 (2), pp. 46-49. [Article]

Knaack, Ulrich and Badnarnah, L. (2008):
Shading/Energy generating skin inspired from natural systems.
In: Proceedings SB08 World sustainable building conference, pp. 1-8,
SB08 World sustainable building conference 2008, Melbourne, 21 Sep 2008 → 25 Sep 2008, [Conference or Workshop Item]

Knaack, Ulrich and Bilow, Marcel Berger, J. and Fischer, A. and Himburg, S. and Kramp, M. (eds.) (2008):
Innovationen im Fassadenbau.
pp. 22-29, Berliner Hoch- und Ingenieurbaukolloquium BHIK 08, Berlin, [Conference or Workshop Item]

Knaack, Ulrich (2007):
Workshop high-rise buildings 2007 - een verslag.
In: Boss Magazine, pp. 81-83. [Article]

Knaack, Ulrich and Badarnah, L. (2007):
Bionic Ventilation System for Building Envelopes.
p. 1, Building Stock Activation 2007 International Conference of 21st Century COE Program of Tokyo Metropolitan University - Tokyo, Tokyo, 5.11.07 -7.11.07, [Conference or Workshop Item]

Knaack, Ulrich and Badarnah, L. (2007):
Bio-Inspired Ventilation System for Building Envelopes.
In: Proceedings of building stock activation, pp. 431-438,
Building Stock Activation 2007 International Conference of 21st Century COE Program of Tokyo Metropolitan University - Tokyo, Tokyo, 5 Nov 2007 → 7 Nov 2007, [Conference or Workshop Item]

Knaack, Ulrich and Thevis, E. and Schwickert, S. (2007):
Prefabricated Houses.
In: Detmolder Schule für Architektur und Innenarchitektur, 1 (15), [Article]

Knaack, Ulrich (2007):
Whats next.
In: Gevelbouw, 4 (1), pp. 18-21. [Article]

Knaack, Ulrich (2007):
Voorgespannen kabelnetgevels heel veel glas en een beetje staal.
In: Dax, 3 (15), pp. 61-64. [Article]

Knaack, Ulrich (2007):
Vezelversterkt beton: modulair en zelfdragend.
In: BouwIQ, 12 (2), pp. 33-35. [Article]

Knaack, Ulrich (2007):
Proefdraaien voor de praktijk - hoogbouwworkshop aan de TU Delft succesvol.
In: ZO techniplan advieurs bv, pp. 9-12. [Article]

Knaack, Ulrich (2007):
Gevels van de toekomst.
In: BouwIQ, 12 (4), pp. 22-24. [Article]

Knaack, Ulrich (2007):
Fassaden - Prinzipien und Konstruktion.
In: Bauwelt, 33, [Article]

Knaack, Ulrich and Bilow, Marcel (2007):
Airick.
In: Detmolder Schule für Architektur und Innenarchitektur, 1, p. 41. [Article]

Knaack, Ulrich and Nolte, C. (2007):
Tragwerksplanung – Untersuchung Holz / Beton.
[Lecture]

Knaack, Ulrich and Bilow, Marcel and Auer, Thomas (2007):
Facades.
Birkhäuser, ISBN 9783764379612,
[Book]

Knaack, Ulrich (2006):
Tragendes Glas, Wege zur Enmaterialisierung des Raums.
Düsseldorf, glasstec 2006, [Conference or Workshop Item]

Knaack, Ulrich (2006):
Werkbundsiedlungen als Vorbild für die Zukunft: Ganzheitliches: Nachhaltigkeit.
Symposien zur Werkbundsiedlung Wiesenfeld in München, München, [Conference or Workshop Item]

Knaack, Ulrich (2006):
Imagine - Inaugurele Rede.
Delft, [Other]

Knaack, Ulrich and Ebbert, T. (2006):
The integral enveloppe applied for sustainable office refurbishment.
pp. 319-326, SASBE2006 - 2ndCIB International Conference on Smart and Sustainable Built Environments; Proceedings, Shanghai, China, [Conference or Workshop Item]

Knaack, Ulrich (2006):
The future for glass starts today : on fixings, breathing, energy.
Conference proceedings ISAAG 2006 : international symposium on the application of architectural glass, München, 30/10/06 → 31/10/06, [Conference or Workshop Item]

Knaack, Ulrich and Hasselbach, R. (2006):
Introduction new strategies for systems.
pp. 7-10, New strategies for systems, Delft, 19 May 2006 → 19 May 2006, ISSN 90-5269-344-7,
[Conference or Workshop Item]

Knaack, Ulrich and Pottgiesser, Uta and Bilow, Marcel (2006):
Fassade 2006: Sanierung und Erneuerung.
In: Fassade 2006, München, [Book Section]

Knaack, Ulrich and Bilow, Marcel (2006):
Pneumatische en vacuümversterkte constructies: De mogelijkheden van lucht.
In: BouwIQ, 11 (7), pp. 32-34. [Article]

Knaack, Ulrich (2006):
Namen & gezichten.
In: Dax, 2 (8), pp. 14-15. [Article]

Knaack, Ulrich (2005):
Material und Konstruktion.
In: Fassade 2005: energie-material-konstruktion, pp. 16-21. [Article]

Knaack, Ulrich and Pottgiesser, Uta and Bilow, Marcel (2005):
Technologietransfer in Richtung Architektur.
In: Deutsche Bau Zeitschrift, 53 (11), pp. 76-78. [Article]

Knaack, Ulrich and Klein, Tillmann (2005):
Fassadenplanung mit Systemen.
In: Deutsches Architektenblatt, 37 (12), pp. 59-62. [Article]

Knaack, Ulrich and Pottgiesser, Uta and Bilow, Marcel (2005):
Book Editorship.
In: Fassade 2005: Energie - Material - Konstruktion, [Article]

L

Lübke, Julia and Wettlaufer, Marius and Kiziltoprak, Nihat and Drass, Michael and Schneider, Jens and Knaack, Ulrich (2018):
Honeycomb-Paperboard Glass Composite Beams.
In: Ce/papers, 2 (5-6), pp. 57-69. e-ISSN 2509-7075,
DOI: 10.1002/cepa.910,
[Article]

Langner, Normen and Bewersdorff, David (2015):
Thermal and Acoustical Simulation of Open Space Working Areas with Thremally Activated Building Systems (TABS).
3rd Annual International Conference on Architecture and Engineering ACE 2015, Singapore, 13.-14.04.2015, [Conference or Workshop Item]

Langner, Normen and Bewersdorff, David (2015):
Thermal and acoustical simulation of open space working Areas in commercial Buildings equipped with thremally activated Builduing systems.
14th Conference of International Building Performance Simulation Association, Hyderabad, India, 7.-9. Dezember 2015, [Conference or Workshop Item]

Luible, A. and Overend, M. and Aelenei, L. and Knaack, Ulrich and Perino, M. and Wellershoff, F. (2015):
Adaptive façade network – Europe.
In: Cost Action TU 1403 adaptive façade network, Delft, TU Delft Open, ISBN 978-94-6186-581-6,
[Book]

Langner, Normen and Bewersdorff, David (2015):
Thermal and acoustical simulation of open space working Areas in commercial Buildings Equipped with thermally activated Building systems.
Hyderabad, India, 14. Conference of International Building Performance Simulation Association (IBPSA 2015), Hyderabad, India, [Conference or Workshop Item]

Langner, Normen and Bewersdorff, David (2014):
Simulation Based Planning of Open Space Working Areas in Commercial Buildings.
Nagoya, Japan, ASim 2014, IBPSA Asia Conference, Nagoya, Japan, 28.-29.11.2014, [Conference or Workshop Item]

Langner, Normen and Bewersdorff, David (2013):
Sommerlicher Wärmeschutz nach DIN 4108-2: Abgleich der Übertemperaturgradstunden aus der thermischen Simulation mit dem Sonneneintragskennwert am Beispiel unterschiedlicher Raumsituationen.
In: Bauphysiktage Kaiserslautern 2013,
Bauphysiktage Kaiserslautern 2013, Kaiserslautern, ISBN 978-3-943995-41-1,
[Conference or Workshop Item]

M

Maurer, Christoph and Sprenger, Wendelin and Franz, Steffen and Lodewijks, Jan and Rüppel, Uwe and Kuhn, Tilmann E. Auer, Thomas and Knaack, Ulrich and Schneider, Jens (eds.) (2017):
Machine code functions in BIM for cost-effective high-quality buildings.
In: PowerSkin Conference Proceedings, pp. 61-69,
Munich, PowerSkin Conference, Munich, 19. January 2017, [Conference or Workshop Item]

Maier, Andreas and Schneider, Jens and Wien, A. and Stephan, J. (2017):
Ein Gebäude als Maschine für Maschinen im Gebäude.
In: Deutsche BauZeitschrift DBZ, 65 (1), pp. 58-67. Gütersloh: Bauverlag BV GmbH, [Article]

Maier, Andreas (2017):
Die ETA-Fabrik: Ein Industriegebäude als Teil der Prozesskette.
Future Factory Design Symposium, Technische Universität München, Fakultät für Architektur, Professur für Entwerfen und Gebäudehülle, 09. März 2017, [Conference or Workshop Item]

Maier, Andreas and Kleuderlein, Jonas and Schneider, Jens (2016):
Einfluss von Bauwerksverformungen auf Fassadenkonstruktionen aus Glas am Beispiel der ETA-Fabrik.
In: Glasbau 2016, 85 (S1), pp. 207-217. Ernst&Sohn, [Article]

Maier, Andreas and Schneider, Jens and Knaack, Ulrich and Beck, Martin (2016):
ETA-Fabrik – Ein Industriegebäude als Teil der Prozesskette.
In: Xia intelligente architektur, 96, pp. 72-75. Verlagsanstalt Alexander Koch GmbH, [Article]

Maier, Andreas (2016):
Energieeffizienz im Industriebau – Ein Demonstrator an der TU Darmstadt N.
Gastvorlesung an der TH Nürnberg im Rahmen des Masterstudiengangs Internationales Bauwesen – Energie und Umwelt – Ressourcenschonendes Bauen, Nürnberg, 02.06.2016, [Conference or Workshop Item]

Maier, Andreas (2016):
Die energieeffiziente Fabrik: Planung und Bau der ETA-Fabrik.
ISOLAR Symposium 2016, TU Darmstadt, 25.02.2016, [Conference or Workshop Item]

Maier, Andreas and Schneider, Jens and Knaack, Ulrich (2016):
ETA-Fabrik- Ein Industriegebäude als Teil der Prozesskette.
In: Xia intelligente Architektur 07-09/16, Zeitschrift für Architektur und Technik, 9689, ISSN 0949-2356,
[Article]

Maier, Andreas and Schneider, Jens and Knaack, Ulrich (2016):
ETA Fabrik ein Industriegebäude als Teil einer Prozesskette.
In: Intelligente Architektur / AIT Spezial Ausgabe 9689, ISSN 0949-2356,
[Article]

Maier, Andreas and Pepeliankova, R. and Marder, R., R. and Grassegger-Schön, G. (2011):
Der ehemalige Hindenburgbau in Stuttgart, Kartierung eines Kulturdenkmals. Natursteinsanierung Stuttgart 2011.
Stuttgart, Fraunhofer RB Verlag 2011, [Report]

O

Oechsner, Matthias and Hanson, Jutta and Schneider, Jens and Abele, Eberhard and Beck, Martin and Schraml, Philipp and Conci, Mira Worms, Martin J. and Radermacher, Franz J. (eds.) (2018):
Effizienzsteigernde Vernetzung an der Technischen Universität Darmstadt.
In: Klimaneutralität – Hessen 5 Jahre weiter, pp. 273-283, Springer Vieweg, Wiesbaden, ISBN 978-3-658-20605-5,
[Book Section]

P

Pourmoghaddam, Navid and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2018):
Prediction of the 2D macro-scale fragmentation of tempered glass using random Voronoi tesselations.
In: Forschungskolloquium 2018 Grasellenbach., pp. 56-59. Springer Vieweg, DOI: 10.1007/978-3-658-23627-4_21,
[Article]

Pourmoghaddam, Navid and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2018):
Relationship between strain energy and fracture pattern morphology of thermally tempered glass for the prediction of the 2D macro-scale fragmentation of glass.
In: Glass Structures and Engineering, Springer International Publishing, ISSN 2363-5142,
DOI: 10.1007/s40940-018-00091-1,
[Article]

Pourmoghaddam, Navid and Kraus, Michael and Schneider, Jens and Siebert, Geralt Schneider, Jens and Weller, Bernhard (eds.) (2018):
The geometrical properties of random 2D Voronoi tesselations for the prediction of the tempered glass fracture pattern.
In: Engineered Transparency 2018,
[Conference or Workshop Item]

Pourmoghaddam, Navid and Schneider, Jens (2018):
Determination of the engine power for quenching of glass by forced convection: simplified model and experimental validation of residual stress levels.
In: Glass Structures and Engineering, DOI: 10.1007/s40940-018-0078-5,
[Article]

Pourmoghaddam, Navid and Schneider, Jens (2018):
Finite-element analysis of the residual stresses in tempered glass plates with holes or cut-outs.
In: Glass Structures and Engineering, 3, pp. 17-37. DOI: 10.1007/s40940-018-0055-z,
[Article]

Pourmoghaddam, Navid and Schneider, Jens (2018):
Experimental investigation into the fragment size of tempered glass.
In: Glass Struct. Eng., 3, pp. 167-181. DOI: 10.1007/s40940-018-0062-0,
[Article]

Pourmoghaddam, Navid and Schneider, Jens (2018):
Doppelringbiegeversuche an Glasplatten aus Kalk-Natron-Silikatglas bei erhöhten Temperaturen bis in den Transformationsbereich.
In: Glasbau 2018, 2 (1), pp. 185-198. [Article]

Prieto Hoces, A.I. and Knaack, Ulrich and Klein, Tillmann and Auer, Thomas (2017):
25 Years of cooling research in office buildings: Review for the integration of cooling strategies into the building façade (1990–2014).
In: Renewable & Sustainable Energy Reviews, 71, pp. 89-102. DOI: 10.1016/j.rser.2017.01.012,
[Article]

Prieto Hoces, A.I. and Klein, Tillmann and Knaack, Ulrich and Auer, Thomas (2017):
Main perceived barriers for the development of building service integrated facades: Results from an exploratory expert survey.
In: Journal of building engineering, 13, pp. 96-106. DOI: 10.1016/j.jobe.2017.07.008,
[Article]

Prieto Hoces, A.I. and Klein, Tillmann and Knaack, Ulrich (2016):
Facade integration: Survey-based assessment of the main problems for the integration of building services in facade systems.
In: Proceedings of the ID@50 Integrated Design Conference 2016, 26 June – 1 July 2016, Bath, UK,
Integrated Design Conference ID@50, Bath, United Kingdom, 29 Jun 2016 → 1 Jul 2016, [Conference or Workshop Item]

Pourmoghaddam, Navid and Nielsen, Jens Henrik and Schneider, Jens Schneider, Jens and Weller, Bernhard (eds.) (2016):
Numerical simulation of residual stresses at holes near edges and corners in tempered glass: A parametric study.
In: Engineered Transparency 2016, pp. 513-525,
Berlin, Ernst & Sohn, Engineered Transparency, Düsseldorf, 20.-21.9.2016, ISBN 978-3-433-03187-2,
[Conference or Workshop Item]

Pelfrene, Joren and Kuntsche, Johannes K. and Van Dam, Sam and Van Paepegem, Wim and Schneider, Jens (2016):
Critical assessment of the post-breakage performance of blast loaded laminated glazing: Experiments and simulations.
In: International Journal of Impact Engineering, 88, pp. 61-71. [Article]

R

Rosendahl, Philipp Laurens and Weißgraeber, Philipp (2020):
A comprehensive elastic and fracture model for stratified snowpacks.
pp. EGU2020-2409, EGU General Assembly Online, 4–8 May 2020, DOI: 10.5194/egusphere-egu2020-2409,
[Conference or Workshop Item]

Rosendahl, Philipp Laurens and Drass, Michael and Schneider, Jens and Becker, Wilfried (2018):
Crack nucleation in hyperelastic adhesive bonds.
In: ce/papers 2, 5-6, pp. 409-425, Engineered Transparency 2018. Glass in Architecture and Structural Engineering, DOI: 10.1002/cepa.941,
[Conference or Workshop Item]

Rühl, Andreas and Kolling, Stefan and Schneider, Jens (2017):
Characterization and modelling of poly(methyl methacrylate) and thermoplastic polyurethane for the application in laminated setups.
In: Mechanics of Materials, 113, pp. 102-111. [Article]

Rühl, Andreas and Kolling, Stefan and Kuntsche, Johannes K. and Schneider, Jens and Mönnich, Sebastian (2012):
Characterization and Modeling of Polymer Interlayers for Laminated Glass.
pp. 146-147, 11. LS-Dyna Forum 2012, [Conference or Workshop Item]

Reymendt, J. and Schneider, Jens Walraven, Joost C. and Stoelhorst, Dick (eds.) (2008):
Properties and Applications of DUCON ®. A Micro-Reinforced Ultra-High-Performance Concrete.
In: Proceedings International fib-Symposium Tailor Made Concrete Structures, pp. 399-403,
London, Taylor & Francis Group, International fib-Symposium Tailor Made Concrete Structures, Amsterdam, 19. – 22.05.2008, ISBN ISBN 978-0-415-47535-8,
[Conference or Workshop Item]

S

Stefanoudakis, Dimitrios and Apostolidi, Eftychia Lampropoulos, Andreas (ed.) (2020):
Strengthening and Modernization of a Characteristic Masonry Building in Vienna, Austria.
In: IABSE Bulletins Case Studies, In: Case Studies on Conservation and Seismic Strengthening/Retrofitting of Existing Structures, pp. 173-192, Zurich, Switzerland, IABSE, ISBN 978-3-85748-173-4,
[Book Section]

Schuster, Miriam and Schneider, Jens and Nguyen, Tuong An (2020):
Investigations on the execution and evaluation of the Pummel test for polyvinyl butyral based interlayers.
In: Glass Structures & Engineering, Springer, ISSN 2363-5142, e-ISSN 2363-5150,
DOI: 10.1007/s40940-020-00120-y,
[Article]

Schuster, Miriam and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2019):
Investigations on the visco- and hyper-elastic behaviour of polyvinylbutyral interlayers at different temperatures.
Tampere, Finland, Glass Performance Days, Tampere, Finland, 27 June 2019, [Conference or Workshop Item]

Sarakinioti, M. V. and Konstantinou, Thaleia and Turrin, Michela and Tenpierik, Martin and Loonen, R. C. G. M. and de Klijn-Chevalerias, M. L. and Knaack, Ulrich (2018):
Development and prototyping of an integrated 3D-printed façade for thermal regulation in complex geometries.
In: Journal of Facade Design and Engineering, 6 (2), pp. 29-40. DOI: 10.7480/jfde.2018.2.2081,
[Article]

Sarakinioti, M. V. and Turrin, Michela and Konstantinou, Thaleia and Tenpierik, Martin and Knaack, Ulrich (2018):
Developing an integrated 3D-printed façade with complex geometries for active temperature control.
In: Materials Today Communications, (15), pp. 275-279. DOI: 10.1016/j.mtcomm.2018.02.027,
[Article]

Staudt, Yves (2018):
Proposal of a Failure Criterion of Adhesively Bonded Connections with Silicone.
Darmstadt, Technische Universität,
[Ph.D. Thesis]

Seel, Matthias and Akerboom, Robert and Knaack, Ulrich and Oechsner, Matthias and Hof, Peter and Schneider, Jens (2018):
Fused glass deposition modelling for applications in the built environment. – Schmelzschichten aus Glas für Anwendungen im Bauwesen.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 7, S. 870 – 880. ISSN 0933-5137, 1521-4052 <reviewed>, [Article]

Schneider, Jens and Müller-Braun, Steffen and Peters, Timon and Pourmoghaddam, Navid and Schuster, Miriam (2018):
Neue Dimensionen beim Bauen mit Glas.
22. Dresdner Baustatik-Seminar, Dresden, [Conference or Workshop Item]

Schuster, Miriam and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2018):
Untersuchungen zum Zeit‐Temperatur‐Superpositions‐Prinzip von Steifigkeiten polymerer Verbundglaszwischenschichten.
DGM FA Polymerwerkstoffe, Kassel, [Conference or Workshop Item]

Schuster, Miriam and Kraus, Michael and Schneider, Jens and Siebert, Geralt (2018):
Investigations on the thermorheologically complex material behaviour of the laminated safety glass interlayer ethylene-vinyl-acetate.
In: Glass Structures & Engineering, 3 (2), pp. 373-388. ISSN 2363-5142,
DOI: 10.1007/s40940-018-0074-9,
[Article]

Seel, Matthias and Akerboom, Robert and Knaack, Ulrich and Oechsner, Matthias and Hof, Peter and Schneider, Jens (2018):
Additive manufacturing of glass components – exploring the potential of glass connections by fused deposition modeling.
In: CGC6, Challenging Glass 6, Conference on Architectural and Structural Applications of Glass. Louter, Bos, Belis, Veer, Nijsse (Eds.), Delft University of Technology, May 2018. Delft: TU, 2018, S. 381 – 388 (https://doi.org/10.7480/cgc.6.2161) <reviewed>, ISBN 978-94-6366-044-0,
[Book Section]

Schneider, Jens and Hilcken, Jonas (2017):
Nickel Sulphide (NiS-) induced failure of glass : fracture mechanics model and verification by fracture data.
In: engineered transparency international conference at glasstec, 2010, pp. 125-136, [Book Section]

Schuster, Miriam and Kuntsche, Johannes K. and Schneider, Jens (2017):
Investigation of the viscoelastic material behaviour of laminated safety glass interlayers.
91. Glastechnische Tagung, Weimar, [Conference or Workshop Item]

Schneider, Jens and Neugebauer, Jürgen and Schuster, Miriam and Peters, Timon (2017):
Cold-bent thin glass laminates for architectural applications: Computational design and material modeling.
IASS, Hamburg, [Conference or Workshop Item]

Schuster, Miriam and Kraus, Michael (2017):
Testing, rheological modelling and design of interlayer materials in laminated safety glass.
Workshop at Glass Performance Days, Tampere, [Conference or Workshop Item]

Schneider, Jens and Schula, Sebastian (2016):
Simulating soft body impact on glass structures.
In: ICE Journal Structures and Buildings, Special Issue on Glass Structures, 169 (6), pp. 416-431. [Article]

Schneider, Jens and Kuntsche, Johannes K. and Schuster, Miriam (2016):
Mechanisches Verhalten von polymeren Zwischenschichten in Verbundglas.
Glas im konstruktiven Ingenieurbau 14, Hochschule München – Fakultät für Bauingenieurwesen, Verein der Freunde des Stahlbaus an der Hochschule München e.V., 03.03.-04.03.2016, [Conference or Workshop Item]

Schneider, Jens and Kuntsche, Johannes K. and Schula, Sebastian and Schneider, Frank and Wörner, Johann-Dietrich (2016):
Glasbau - Grundlagen, Berechnung, Konstruktion.
In: Mechanik, Werkstoffe und Konstruktionen im Bauwesen, 2, Berlin, Springer, ISBN 3540689273, 9783540689270,
[Book]

Schneider, Jens and Aronen, A. and Hilcken, J. and NIelsen, J. and Karvinen, R. and Olesen, J.F. (2016):
Stress relaxation in tempered glass caused by heat soak testing.
In: Engineering Structures, (122), pp. 42-49. Elsevier, ISSN 0141-0296,
DOI: 10.1016/j.engstruct.2016.04.024.,
[Article]

Schula, Sebastian (2015):
Charakterisierung der Kratzanfälligkeit von Gläsern im Bauwesen = Characterisation of the scratch sensitivity of glasses in civil engineering.
In: Mechanik, Werkstoffe und Konstruktion im Bauwesen ; 43, Berlin, Springer, TU Darmstadt, ISBN 978-3-662-47781-6,
[Ph.D. Thesis]

Schneider, Jens and Becker, Matthias and Drass, Michael and Pullamthara, Jiny Jose Strukturanalyse, Messung und Modellierung mit terrestrischem Radar und inversem Finite-Element Ansatz.
[Data]

Strauss, Alfred and Apostolidi, Eftychia and Zimmermann, Thomas and Gerhaher, Ulrich and Dritsos, Stephanos (2014):
Experimental investigations of fibre and steel reinforced elastomeric bearings: shear modulus and damping coefficient.
In: Engineering Structures, 75, pp. 402-413. Elsevier, ISSN 0141-0296,
DOI: 10.1016/j.engstruct.2014.06.008,
[Article]

Schober, Kay-Uwe and Drass, Michael and Kuechler, M. (2014):
Glued-inrods in timber joints: Characterization of failure modes dependent on the test set-up.
Experimental Research with Timber - Cost FP1004 ESR conference, Prague Czech Republic, 21.-23.05.2014, [Conference or Workshop Item]

Schneider, Jens and Schula, Sebastian and Kuntsche, Johannes K. (2014):
Chancen und Risiken beim Bauen mit Glas.
18. Dresdner Baustatik-Seminar "Chancen und Risiken in der Tragwerksplanung", Dresden, 17.10.2014, [Conference or Workshop Item]

Schneider, Jens and Kuntsche, Johannes K. (2014):
Rückhaltesysteme für geklemmte Verbundglasplatten bei Explosionsbeanspruchung.
Fachtagung Baustatik-Baupraxis 12, Technische Universität München / Universität der Bundeswehr Münschen, 24. – 25. Februar 2014, [Conference or Workshop Item]

Schober, Kay-Uwe and Becker, Wieland and Drass, Michael and Weber, Jan (2014):
High-performance timber composite joints for spatial round wood truss structures.
13th World Conferece on Timber Engineering WCTE 2014, Quebec City Canada, 10.-14.08.2014, [Conference or Workshop Item]

Schober, Kay-Uwe and Kuechler, Michael and Drass, Michael (2014):
Advancement of glued-in rods using polymer concrete as composite material.
13th World Conferece on Timber Engineering WCTE 2014, Quebec City Canada, 10.-14.08.2014, [Conference or Workshop Item]

Schneider, Jens and Garrecht, Harald and Maier, Andreas and Gilka-Bötzow, Albrecht (2014):
Ein multifunktionales und energetisch aktives Fassadenelement aus Beton.
In: Bautechnik, 91 (3), pp. 167-174. ISSN 1437-0999,
[Article]

Schula, Sebastian and Schneider, Jens and Vandebroek, M. and Belis, J. (2013):
Fracture strength of glass, engineering testing methods and estimation of characteristic values.
In: COST Action TU0905, Mid-term Conference on Structural Glass, Proceedings, pp. 223-234,
COST Action TU0905, Mid-term Conference on Structural Glass, London, UK: Taylor & Francis Group., [Conference or Workshop Item]

Schober, Kay-Uwe and Drass, Michael and Becker, Wieland (2013):
Adhesive strength of timber joints with unconventional glued-in rods.
Wood Adhesives 2013, Toronto, ON, Canada, 09.-11.10.2013, [Conference or Workshop Item]

Schober, Kay-Uwe and Drass, Michael (2013):
Concrete-based adhesives used in connections.
Enhance mechanical properties of timber, engineerred wood products and timber structures - COST FP1004 ESR conference, Nicosia, Cyprus, [Conference or Workshop Item]

Schneider, Jens and Kuntsche, Johannes K. and Kleuderlein, Jonas (2012):
Load-Bearing Capacity of Thin Film Photovvoltaic Modules.
In: Challenging Glass 3, pp. 553-564, Delft, [Book Section]

Schneider, Jens and Kleuderlein, Jonas and Kuntsche, Johannes K. (2012):
Tragfähigkeit von Dünnschicht-Photovoltaik-Modulen.
In: Glasbau 2012, pp. 315-325, Berlin, Ernst&Sohn, [Book Section]

Schneider, Jens and Kuntsche, Johannes K. (2012):
Glas contra Sprengstoff - Anforderungen an explosionshemmende Verglasungen.
In: Glaswelt, (11), pp. 32-33. [Article]

Schneider, Jens and Kolling, Stefan and Kuntsche, Johannes K. and Mönnich, Sebastian (2012):
Tensile properties of different polymer interlayers under high strain rates.
In: Engineered Transparency 2012, pp. 427-437, Düsseldorf, [Book Section]

Schober, Kay-Uwe and Drass, Michael (2012):
Advanced interface interaction in timber engineering joints.
Enhance mechanical properties of timber, engineerred wood products and timber structures - COST FP1004 ESR conference, Zagreb, [Conference or Workshop Item]

Schneider, Jens and Hilcken, Jonas and Kasper, Andreas (2012):
Ein Modell zur Bestimmung der Versagenswahrscheinlichkeit von heißgelagertem ESG.
In: Glasbau Stahlbau, 81 (S1), pp. 171-184. Ernst&Sohn, [Article]

Schneider, Jens and Kuntsche, J. and Kleuderlein, J. Bos, F. and Louter, C. and Nijsse, R. and Veer, F. (eds.) (2012):
Load-Bearing Capacity of Thin Film Photovoltaic Modules.
In: Proceedings of Challenging Glass 3, pp. 553-564,
Delft, IOS Press, [Conference or Workshop Item]

Schober, Kay-Uwe and Becker, Wieland and Drass, Michael (2012):
Advanced interface interaction in timber engineering joints with dowel-type fasteners embedded in high-performance ceramic fillers.
12th World Conference on Timber Engineering WCTE 2012, Auckland New Zealand, 15.-19.07.2012, [Conference or Workshop Item]

Schneider, Jens and Franz, J. Schneider, J. and Weller, B. (eds.) (2012):
Classification of the material properties of interlayers for laminated glass regarding the post-breakage behavior.
In: Glass, facade, energy: Engineered transparency - international conference at glasstec, pp. 417-426,
Darmstadt, Darmstadt : Techn. Univ., [Conference or Workshop Item]

Schneider, Jens and Kuntsche, J. (2012):
Glas contra Sprengstoff – Anforderungen an explosionshemmende Verglasungen.
In: Glaswelt, (11), pp. 32-33. Alfons W. Gentner Verlag, Stuttgart, [Article]

Schneider, Jens and Schula, Sebastian and Weinhold, W.P. (2012):
Characterisation of the scratch resistance of annealed and tempered architectural glass.
In: Thin Solid Films, 520 (12), pp. 4190-4198. Elsevier, ISSN 00406090,
DOI: 10.1016/j.tsf.2011.04.104,
[Article]

Schneider, Jens and Schmidt, H. and Wacker, J. Beer, G. and Dünser, C. and Hofstetter, G. and Theiner, Y. (eds.) (2011):
Windbeanspruchung und Aussteifung von Reiheneckhäusern und Reihenmittelhäusern – experimentelle und probabilistische Untersuchung.
In: Baustatik – Baupraxis 11, Fachtagung der Lehrstühle und Institute für Baustatik, pp. 321-334,
Universität Innsbruck /TU Graz, Fachtagung der Lehrstühle und Institute für Baustatik,, Universität Innsbruck, 21. – 22.02.2011, [Conference or Workshop Item]

Schneider, Jens and Schula, S. Beer, G. and Dünser, C. and Hofstetter, G. and Theiner, Y. (eds.) (2011):
Zwei Verfahren zum rechnerischen Nachweis der dynamischen Beanspruchung von Verglasungen durch weichen Stoß.
In: Baustatik – Baupraxis 11, pp. 343-352,
Graz, Inst. für Baustatik, Techn. Univ. Graz, Fachtagung der Lehrstühle und Institute für Baustatik, Universität Innsbruck, 21. – 22.02.2011, [Conference or Workshop Item]

Schneider, Jens (2010):
Rechnerischer Nachweis des weichen Stoßes: Grundlagen und Vorschlag für DIN 18008-4.
8, pp. 2-49, Glas im konstruktiven Ingenieurbau, Hochschule für angewandte Wissenschaften FH München, 18.03.2010, [Conference or Workshop Item]

Schneider, Jens and Schula, S. (2010):
Transient impact simulation and a simplified mechanical model for soft body impact on glass panes (engineered transparency).
In: International Conference at glasstec, Tagungsband, pp. 71-82,
Düsseldorf, Germany, 29. – 30.09.2010, [Conference or Workshop Item]

Schneider, Jens and Grammou, N. and Kleuderlein, J. (2010):
Optimization of the structural capacity and thermal behavior of SCPP glass roof.
In: Proceedings SCPT 2010, pp. 301-310,
Ruhr Universität Bochum, 28.- 30.09.2010, [Conference or Workshop Item]

Schneider, Jens and Schula, S. (2010):
Bent architectural glasses.
In: International Conference on Structure and Architecture (ICSA 2010),
Guimaraes, Portugal, 21. – 23.07.2010, [Conference or Workshop Item]

Schneider, Jens and Weinhold, W. and Schula, S. (2010):
Characterization of the scratch resistance of tempered architectural glass and glass coatings by in-situ microtribology.
In: The International Conference on Coatings on Glass and Plastics (ICCG 8),
Braunschweig, Germany, 13.- 17.06.2010, [Conference or Workshop Item]

Schneider, Jens (2010):
Entwicklung im konstruktiven Glasbau [Vortrag].
Stuttgart, Festsymposium Gerd Bischoff, ILEK Stuttgart, 29.10.2010, [Conference or Workshop Item]

Siahos, Georgios and Apostolidi, Eftychia and Dritsos, Stephanos (2010):
Comparison of FEMA and EC8 Procedures for Seismic Assessment of Existing Buildings via Pushover Analysis,.
In: Developments and Needs for International Practice - Joint IABSE-fib Conference on Codes in Structural Engineering, pp. 1269-1276,
Dubrovnik, Croatia, 03.-05.05.2010, ISBN 978-953-7621-07-0.,
[Conference or Workshop Item]

Schneider, Jens and Beyer, J. (2009):
Bemessung punktförmig gelagerter Verglasungen. Stand der Technik und geplante Regelungen der DIN 18008-3.
In: Seminar „Weiterbildung für Tragwerksplaner“,
Universität Kaiserslautern, 23.09.2009, [Conference or Workshop Item]

Schneider, Jens and Kooymans, J. (2009):
The need for research and development collaboration between designers and industry.
In: Conference proceedings,
Glass Performance Days (GPD), Tampere, Finnland, 12 - 15 June 2009, [Conference or Workshop Item]

Schneider, Jens (2009):
Bauen mit gebogenen Gläsern – Herstellung, Eigenschaften, Tragverhalten.
In: VDI-Berichte, 2084, In: 2. VDI Tagung: Bauen mit innovativen Werkstoffen, pp. 13-22,
Düsseldorf, VDI-Verlag, Bauen mit innovativen Werkstoffen, Köln, 03. – 04.11.2009, [Conference or Workshop Item]

Schneider, Jens Bells, M. and Kim, J. (eds.) (2009):
Making Visions Reality.
In: Engineered Transparency – The Technical, Visual, and Spatial Effects of Glass, pp. 182-188, New York, Princeton Architectural Press, ISBN 978-1-56898-798-9,
[Book Section]

Schneider, Jens (2009):
Sicherheitsglas in der Praxis Verwendung von ESG und ESG-H im Baubereich [Vortrag].
Rosenheim, Rosenheimer Fenstertage, Rosenheim, 15. -16.10.2009, [Conference or Workshop Item]

Schneider, Jens (2009):
Bauen mit Glas: Grundlagen und baurechtliche Anforderungen [Vortrag].
Hannover, Tagung der Vereinigung der Prüfingenieure Niedersachsen, Hannover, 19.11.2009, [Conference or Workshop Item]

Schneider, Jens (2008):
Grenzen der Gestaltung – Einfluss von Sicherheitsaspekten auf die Verwendung von Glas im Bau [Vortrag].
Rosenheim, Rosenheimer Fenstertage, Rosenheim, 16. -17.10.2008, [Conference or Workshop Item]

Schneider, Jens and Wörner, Johann-Dietrich (2008):
DIN 18008 – Glas im Bauwesen. Bemessungs- und Konstruktionsregeln.
In: Stahlbau, 77 (S1), pp. 3-9. Ernst & Sohn, ISSN 0038-9145, 1437-1049,
DOI: 10.1002/stab.200810025,
[Article]

Schneider, Jens and Keil, Andreas and Hagenmayer, Sandra (2008):
Small concrete pedestrian bridge with integral abutments – an alternative solution for pedestrian bridges over highways.
In: Proceedings International fib-Symposium Tailor Made Concrete Structures,
International fib-Symposium Tailor Made Concrete Structures, Amsterdam, 19. – 22.05.2008, [Conference or Workshop Item]

Schneider, Jens and Techen, H. and Stengler, R. (2008):
Determination of the Scratch Resistance of Annealed and Tempered Glasses by Using UST (Universal Surface Tester).
In: Proceedings of 53. Internationales Wissenschaftliches Kolloquium, pp. 121-122,
53. Internationales Wissenschaftliches Kolloquium, Technische Universität Ilmenau, 08 – 12 September 2008, [Conference or Workshop Item]

Schneider, Jens (2008):
Weil es machbar ist. Glastreppe der Oper in Toronto.
In: Deutsche Bauzeitung (db), 5, pp. 52-56. Konradin Medien GmbH, ISSN 0721-1902,
[Article]

Schneider, Jens and Heger, F. (2007):
Ganzglastreppe in der Oper Toronto/ Kanada.
Kapitel 9, In: 5. Seminar Glas im konstruktiven Ingenieurbau,
Fachhochschule München, Fachhochschule München, 08. – 09.03.2007, [Conference or Workshop Item]

Schneider, Jens (2007):
DIN 18008 Glas im Bauwesen – Bemessungs- und Konstruktionsregeln, Erläuterungen und Anwendung.
In: Tagungsband Glasbau 2007, pp. 27-53,
Technischen Universität Dresden, 23.03.07, [Conference or Workshop Item]

Schober, H. and Schneider, Jens and Justiz, S. and Gugeler, J. and Paech, C. and Balz, M. (2007):
Innovations with glass, steel and cables.
In: Proceedings - Glass Performance Days (GPD), pp. 198-201,
Glass Performance Days (GPD), Tampere, Finland, 15.-18. Juni 2007, [Conference or Workshop Item]

Schneider, Jens (2007):
Making Visions Reality.
In: Proceedings Engineered Transparency,
Columbia University Graduate School of Architecture, Planning and Preservation (GSAPP), Columbia University, New York, 27. – 28.09.2007, [Conference or Workshop Item]

Schneider, Jens (2006):
Joseph Paxton – Ingenieurporträt.
In: Deutsche Bauzeitung (db), (12), pp. 70-75. Konradin Medien GmbH, ISSN 0721-1902,
[Article]

Schneider, Jens and Wellershoff, F. (2006):
Unter Druck. Tragende Glaskonstruktionen und deren Verbindungstechniken.
In: Deutsche Bauzeitung (db), (12), pp. 57-63. Konradin Medien GmbH, ISSN 0721-1902,
[Article]

Schneider, Jens (2006):
Thermal Tempering Simulation.
In: Proceedings of the International Symposium on the Application of Architectural Glass (ISAAG),
International Symposium on the Application of Architectural Glass (ISAAG), Munich, Germany, 30-31.10.2006, [Conference or Workshop Item]

Schneider, Jens (2006):
Tragende Verbindungen im Glasbau. Verbindungstechniken am Beispiel ausgeführter Ganzglaskonstruktionen.
In: VDI-Berichte, 1933, In: Bauen mit Glas, pp. 67-86, Düsseldorf, VDI-Verlag, ISBN 3180919337,
[Book Section]

Schneider, Jens (2005):
150 Kilo auf Zehenspitzen. Konstruktion von Überkopfverglasungen.
In: Deutsche Bauzeitung (db), 6, Konradin Medien GmbH, ISSN 0721-1902,
[Article]

Schneider, Jens and Hofmann, T. and Reisinger, G. (2005):
Glass Foil-a new "glazing" possibility.
pp. 278-280, Glass Processing Days, the 9th International Conference on Architectural and Automotive Glas, Tampere, Finland, June 17 - 20, 2005, [Conference or Workshop Item]

Schneider, Jens (2005):
Innovative Applications of Glass in Structures.
pp. 41-49, Glass Processing Days, the 9th International Conference on Architectural and Automotive Glas, Tampere, Finnland, June 17 - 20, 2005, [Conference or Workshop Item]

Schneider, Jens and Siegele, Klaus (2005):
Glasecken. Konstruktion, Gestaltung, Beispiele.
München, Dt. Verlags-Anstalt, ISBN 3-421-03414-1,
[Book]

Schober, Hans and Schneider, Jens (2004):
There – Not there. Structural Glass and Glass Structures.
Symposium on transparency in architectural and structural design, Faculty of Architecture, TU Delft, 2004, [Conference or Workshop Item]

Schober, Hans and Gerber, Hannes and Schneider, Jens (2004):
Ein Glashaus für die Therme in Badenweiler.
In: Stahlbau, 73 (11), pp. 886-892. Ernst & Sohn, ISSN 0038-9145,
DOI: 10.1002/stab.200490213,
[Article]

Schober, Hans and Schneider, Jens (2004):
Developments in Structural Glass and Glass Structures.
In: Structural Engineering International, 14 (2), pp. 84-87. Taylor & Francis, ISSN 1016-8664,
[Article]

Schneider, Jens (2004):
Glass Strength in the Borehole Area of Annealed Float Glass and Tempered Float Glass.
In: International Journal of Forming Processes (IJFP), 7 (4), pp. 523-541. Hermes, DOI: 10.3166/ijfp.7.523-541,
[Article]

Schober, Hans and Schneider, Jens (2003):
Ganzglaskonstruktion Glaspool Cyberhelvetia. Glas als interaktives Medium.
In: GLAS, 4, pp. 5-7. [Article]

Schneider, Jens (2002):
Façade Structures with Channel Shaped Glass.
In: IABSE Reports, 86, pp. 74-82, Zürich, IABSE, Melbourne, 11 - 13 September, 2002, DOI: 10.2749/222137802796337413,
[Conference or Workshop Item]

Schneider, Jens (2002):
Gussglas mit Profil. Hochwertige Fassaden aus billigem Profilglas.
In: Deutsche Bauzeitung (db), 3, pp. 89-96. Konradin Medien GmbH, ISSN 0721-1902,
[Article]

Schneider, Jens and Bohmann, D. (2002):
Glasscheiben unter Stoßbelastung – Experimentelle und theoretische Untersuchungen für absturzsichernde Verglasungen bei weichem Stoß.
In: Bauingenieur, 77 (12), pp. 581-592. Springer-VDI-Verlag, ISSN 0005-6650,
[Article]

Schneider, Jens (2002):
Glass Strength in the Borehole Area.
In: Valensciences, 1, In: Modeling of Glass Forming and Tempering (M.G.F.T.), pp. 224-241,
Valenciennes, Presses Univ. de Valenciennes, 2nd International Colloquium on Modeling of Glass Forming and Tempering (M.G.F.T.), University of Valenciennes, France, 23.01.-25.01.2002, [Conference or Workshop Item]

Schneider, Jens and Wörner, Johann-Dietrich (2001):
Glass Strength of Annealed and Tempered Structural Glass in the Area of Drilled Holes.
In: Glass Processing Days, In: Proceedings 7th Glass Processing Days 2001, pp. 193-198,
Tampere, Finnland, Tamglass, 7th Glass Processing Days 2001, Tampere, Finnland, 18 to 21 june 2001, [Conference or Workshop Item]

Schneider, Jens and Wörner, Johann-Dietrich (2001):
Impact Loading on Glass Panes by Soft Body Impact.
In: Glass Processing Days, In: Proceedings 7th Glass Processing Days 2001, pp. 682-687,
Tampere, Finland, Tamglass, 7th Glass Processing Days 2001, Tampere, Finland, 18 to 21 june 2001, [Conference or Workshop Item]

Schneider, Jens and Lanzrath, M. (2000):
Innovationen im konstruktiven Glasbau.
In: Das Architekten-Magazin, 13, pp. 24ff. VFA-Profil, [Article]

Schneider, Jens and Seegräber, G. (1999):
Interdisciplinary Teaching of Architecture and Civil Engineering at Darmstadt University of Technology.
pp. 199-201, 17th EAAE Conference Plymouth 1999, Plymouth UK, 1999, [Conference or Workshop Item]

Singhof, B. and Schneider, Jens (1999):
Zweigeteilter Sicherheitsstandard in den Technischen Regeln für Überkopfverglasungen?
In: Baurecht, 30 (5), p. 465. Werner-Verlag, [Article]

Schneider, Jens (1999):
Überkopfverglasungen und begehbares Glas.
In: Deutsche Bauzeitung (db), 104 (4), pp. 129ff. [Article]

Shen, Xin and Schneider, Jens (1998):
Festigkeit gebohrter Gläser.
In: Bericht Nr. 13, Darmstadt, Glas im Bauwesen, Architektur und Konstruktion, [Report]

Schneider, Jens and Wörner, Johann-Dietrich (1998):
Vergleichsstudie zwischen internationalen Bachelor- und Master-Studiengängen und den Diplom-Studiengängen Bauingenieurwesen an der TU Darmstadt und FH Darmstadt.
In: Deutscher Akademischer Austauschdienst (DAAD) (Hrsg.), Tagungsdokumentation Bachelor und Master in den Ingenieurwissenschaften, [Conference or Workshop Item]

Shen, X. and Pfeiffer, R. and Schneider, Jens (1997):
Sicherheit und Resttragfähigkeit von Überkopf-verglasungen und begehbarem Glas.
In: Bericht, In: Institut für Statik Technische Universität Darmstadt Jahresbericht 1997, 12, pp. 119-130. Institut für Statik Technische Universität Darmstadt, [Article]

T

Thiele, Christian-Dominik (2016):
Festigkeitsermittlung thermisch verformter Gläser am Doppelring-Biegeversuch.
TU Darmstadt, [Master Thesis]

W

Weißgraeber, Philipp and Rosendahl, Philipp Laurens Bischoff, M. and Scheven, M. and Oesterle, B. (eds.) (2020):
Schneebrettlawinen – Kollaps poröser Schichten.
pp. 561-568, Stuttgart, Germany, Institut für Baustatik und Baudynamik, Universität Stuttgart, Baustatik – Baupraxis 14, DOI: 10.18419/opus-10762,
[Conference or Workshop Item]

Weller, B. and Schneider, Jens and Reich, S. and Ebert, J. (2019):
Kontaktmaterialien zur Einleitung von Druckkräften in Glas.
In: Bauingenieur, 85 (3), pp. 118-127. Springer-VDI-Verlag, [Article]

Weißgraeber, Philipp and Rosendahl, Philipp Laurens (2019):
Technological Prediction with Models.
In: Proceedings of the 2nd NATO Mountain Warfare Congress, pp. 99-113,
Poljče, Slovenia, [Conference or Workshop Item]

Werkle, Horst and Firus, Andrei and Francke, Wolfgang (2016):
Einfluss personeninduzierter Schwingungen auf die Messgenauigkeit von Kraftmessplatten in Ganglaboren.
In: Bauingenieur, 91, pp. 110-119. Springer, ISSN 0005-6650,
[Article]

Wehsener, Jörg and Schulz, Tino and Gecks, Jens and Bishara, Nadja and Krug, Detlef and Plagge, Rudolf (2016):
Untersuchungen zu mehrlagigen Massivholzplatten als Heiz- und Kühlelement.
In: Bauphysik, 28 (3), pp. 129-134. Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, ISSN 01715445,
DOI: 10.1002/bapi.201610015,
[Article]

Werkle, Horst and Francke, Wolfgang and Firus, Andrei (2015):
Influence of human induced floor vibrations on the measurement precision of a force plate in a biomechanics laboratory.
In: Compdyn 2015,
5th ECCOMA thermatic conference on computational methods in structural dynamics and earthquake engineering, Crete Island, Greece, 25.-27.05.2015, [Conference or Workshop Item]

Werkle, Horst and Francke, Wolfgang and Firus, Andrei and Clausner, C. (2013):
Einfluss von Deckenschwingungen auf die Messgenauigkeit in Ganglaboren.
283, pp. 263-272, 13. D-A-CH Tagung für Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013), Wien, 29.-30.08.2013, [Conference or Workshop Item]

Wörner, Johann-Dietrich and Boxheimer, Kaja (2013):
Wissenschaftliche Begleitung des Vorhabens „Fabrik als Passivhaus“.
[Report]

Wörner, Johann-Dietrich and Schneider, Jens and Fink, Andreas (2001):
Glasbau.
Berlin, Heidelberg, Springer Verlag, ISBN 3540668810,
[Book]

Wörner, Johann-Dietrich and Schneider, Jens (2001):
Konstruktiver Glasbau.
In: Bauzeitung, 4, pp. 51-54. Verlag für Architektur und technische Wissenschaften Berlin, [Article]

Wörner, Johann-Dietrich and Timm, G. and Techen, Holger and Schneider, Jens (1998):
Checkliste zur bautechnischen Prüfung von Glaskonstruktionen.
In: Der Prfüfingenieur Oktober 1998, 13, pp. 57-64. [Article]

Wörner, Johann-Dietrich and Schneider, Jens (1998):
Glas als Konstruktions- und Fassadenelement im Bauwesen.
In: VDI Gesellschaft Bautechnik, Jahrbuch 1998, Düsseldorf, VDI-Verlag GmbH, [Book Section]

Wörner, Johann-Dietrich and Shen, X. and Pfeiffer, R and Schneider, Jens (1998):
Konstruktiver Glasbau.
In: Bautechnik, 75 (5), pp. 280-293. Ernst & Sohn, DOI: 10.1002/bate.199802560,
[Article]

This list was generated on Sun Apr 18 01:16:26 2021 CEST.