TU Darmstadt / ULB / TUbiblio

Browse by Person

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Date | Language
Jump to: 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2001 | 2000 | 1999
Number of items: 83.

2013

König, Ruben and Rinderknecht, Stephan and Anderson, J. A. and Binder, A. (2013):
Effizienzsteigerung durch optimale Abstimmung von Getriebe und E-Maschinen am Beispiel des Two-Drive-Transmission.
In: Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge, München, Deutschland, 26.-27. November 2013, [Conference or Workshop Item]

2012

Binder, A. and Nakajima, S. and Kloft, M. and Müller, C. and Samek, W. and Brefeld, U. and Müller, K.-R. and Kawanabe, M. (2012):
Insights from Classifying Visual Concepts with Multiple Kernel Learning.
In: PLoS ONE, 7(8):e38897, [Article]

2011

Binder, A. and Nakajima, S. and Kloft, M. and Müller, C. and Samek, W. and Brefeld, U. and Müller, K.-R. and Kawanabe, M. (2011):
Insights from Classifying Visual Concepts with Multiple Kernel Learning.
[Report]

2010

Schiereck, D. and Erxleben, U.
Müller-Stewens, G. and Kunisch, S. and Binder, A. (eds.) (2010):
M&A-Erfolg im gesamtwirtschaftlich schwierigen Umfeld.
In: Mergers & Aquisitions, Stuttgart, Schäffer-Poeschel, pp. 153-167, [Book Section]

2009

Magdun, O. and Binder, A. and Purcarea, C. and Rocks, A. (2009):
High-Frequency Induction Machine Models for Calculation and Prediction of Common Mode Stator Ground Currents in Electric Drive Systems.
In: 13th European Conference on Power Electronics and Applications, EPE 2009, Barcelona, Spanien, 8. – 10. September 2009, [Conference or Workshop Item]

Magdun, O. and Binder, A. and Purcarea, C. and Rocks, A. (2009):
Modeling of Asymmetrical Cables for an Accurate Calculation of Common Mode Ground Currents.
In: IEEE Energy Conversion Congress and Exposition 2009, 20. – 24. September 2009, San José, California, [Conference or Workshop Item]

Purcarea, C. and Mutschler, P. and Magdun, O. and Binder, A. and Rocks, A. (2009):
Time Domain Simulation Models for Inverter-Cable-Motor System in Electrical Drives.
In: 13th European Conference on Power Electronics and Applications, EPE 2009, Barcelona, Spanien, 8. – 10. September 2009, [Conference or Workshop Item]

Binder, A. and Kawanabe, M. and Brefeld, U. (2009):
Efficient Classification of Images with Taxonomies.
In: Proceedings of the Asian Conference on Computer Vision, [Conference or Workshop Item]

Nakajima, S. and Binder, A. and Müller, C. and Wojcikiewicz, W. and Kloft, M. and Brefeld, U. and Müller, K.-R. and Kawanabe, M. (2009):
Multiple Kernel Learning for Object Classification.
In: Proceedings of the 12th Workshop on Information-based Induction Sciences, [Conference or Workshop Item]

2008

Janjic, B. and Binder, A. and Bischof, V. and Ludwig, G. (2008):
Entwurf und Bau eines magnetgelagerten integrierten Pumpenantriebs.
In: VDE/VDI-Tagung Elektrische-mechanische Antriebssysteme, [Online-Edition: http://www.fst.tu-darmstadt.de/media/fachgebiet_fst/dokument...],
[Article]

2007

Rocks, A. and Hinrichsen, V. and Henze, O. and Binder, A. (2007):
Application of varistors for overvoltage protection of machine windings in inverter-fed drives.
In: The 6th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives, Krakau, Polen, 6.-8. September 2007, [Conference or Workshop Item]

Balzer, G. and Binder, A. and Hinrichsen, V. and Mutschler, P. (2007):
125 Jahre Elektrotechnik an der TU Darmstadt.
In: etz, pp. 94-98, [Article]

Funieru, Bogdan and Binder, A. (2007):
Analysis of the force output and generated losses of a linear DC actuator supplied with a power electronic converter.
In: Proceedings of the 16th Computation of Electromagnetic Fields (COMPUMAG), 2007, Aachen, S. 691-692 (CD-ROM), [Conference or Workshop Item]

Binder, A. and Doppelbauer, M. and Gold, P. W. and Hofmann, W. (2007):
Antriebssysteme : Innovationen - Trends -Mechatronik.
In: etz, pp. 60-69, [Article]

Binder, A. and Funieru, Bogdan and Knopik, Th. and Güllich, P. (2007):
Ausnutzung der Eisenremanenz zur Positionserfassung beim Auswuichten von Kleinrotoren.
In: Proceedings 7. (VDE) GMM/ETG-Fachtagung Innovative Klein- und Mikroantriebstechnik, 12.-13.06.2007, Augsburg, Germany, S. 81-86 (CD-ROM)., [Conference or Workshop Item]

Mütze, A. and Binder, A. (2007):
Calculation of circulating bearing currents in machines of inverter-based drive systems.
In: IEEE Transactions on Industrial Electronics, pp. 932-938, 54, [Article]

Mütze, A. and Binder, A. (2007):
Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems.
In: IEEE Transactions on Industrial Electronics, pp. 665-672, 43, [Article]

Schneider, T. and Binder, A. (2007):
Design and evalualtion of a 60000 rpm permanent magnet bearingless high speed motor.
In: Proceedings of the seventh international conference on power electronics and drive systems (PEDS) 2007, November 27 - 30, Bangkok, Thailand. 8 S. (CD-ROM), [Conference or Workshop Item]

Deak, Cs. and Binder, A. (2007):
Design of Compact Permanent-Magnet Synchronous Motors with Concentrated Windings.
In: Revue Roumaine des Sciences Techniques : série électrotechnique et énergetique, pp. 183-197, 52, [Article]

Janjic, B. and Binder, A. and Bischof, V. and Ludwig, G. (2007):
Design of PM integrated motordrive systems for axial pumps.
In: Proceedings of the 12th European Conference on Power Electronics and Applications, 2007, 2-5 September, Aalborg, denmark, 10 Seiten (CD-ROM), [Report]

Funieru, Bogdan and Binder, A. (2007):
Design of a linear transversal flux DC actuator used for railway applications.
In: Proceedings of the Korea-Germany joint symposium on power electronics. (2007), 18-21 October 2007, POSTECH international Center, Pohang, Korea,S. 25-39, [Conference or Workshop Item]

Binder, A. (2007):
Elektrische Energietechnik - die Basis unseres Wohlstands.
In: Technik & Mensch -Energietechnik. VDI Frankfurt-Darmstadt 1/2007, S. 1., [Conference or Workshop Item]

Balzer, G. and Binder, A. and Hartkopf, T. and Hinrichsen, V. and Mutschler, P. and Stenzel, J. (2007):
Elektrische Energietechnik : Schlüsseltechnologie der Zukunft.
In: Thema Forschung, pp. 6-14, [Article]

Binder, A. (2007):
Elektrische Energietechnik an der TU Darmstadt - Ingenieurausbildung im Puls der Zeit.
In: Technik & Mensch -Energietechnik. VDI FrankfurtDarmstadt 1/2007, S. 17., [Conference or Workshop Item]

Binder, A. (2007):
Energiesparen mit moderner Antriebstechnik - Potentiale und technische Möglichkeiten (Energy Savings with Modern Drive Technology - Potentials and technical Feasibility).
In: Internationaler ETG-Kongress (2007) 23. - 24.10.07, Karlsruhe, Fachbericht 107, S. 17-26, [Conference or Workshop Item]

Schlemmer, E. and Ramsauer, F. and Cui, X. and Binder, A. (2007):
HYDROMATRIX and StraflomatrixTM, electric energy from low head hydro potential.
In: Proceedings of the International conference on Clean Electrical Power Renewable Energy Resources Impact (ICCEP), 21.-23.05.2007, Capri, Italy, S. 329-334 (CD-ROM), [Conference or Workshop Item]

Binder, A. and Schneider, T. (2007):
High-speed Inverter-Fed AC Drives.
In: Proceedings International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) 2007, 10-12 September, Bodrum, Turkey, S. 9-16, [Conference or Workshop Item]

Deak, Cs. and Binder, A. (2007):
Increased torque density of permanent-magnet motors using concentrated windings and intensive cooling.
In: Proceedings of the international exhibition conference for power electronics intelligent motion power quality (PCIM Europe), Nürnberg, 2007, 6 S. (CD-ROM), [Conference or Workshop Item]

Binder, A. and Schneider, T. and Redemann, C. (2007):
Lagerlose Motoren - eine Zukunftstechnologie?
In: Bulletin SEV/AES, pp. 9-13, [Article]

Schneider, T. and Binder, A. (2007):
Lagerlose Motoren als Hochdrehzahlantriebe.
In: Thema forschung, pp. 64-68, [Article]

Funieru, Bogdan and Binder, A. (2007):
Losses and forces due to eddy currents in a magnetically non-linear conductive half space.
In: Electrical Engineering (Archiv für Elektrotechnik), pp. 43-54, 90, [Article]

Binder, A. and Sabirin, C. R. and Popa, D. D. and Craciunescu, A. (2007):
Modeling and digital control of an Active Magnetic Bearing System.
In: Revue Roumaine des Sciences Techniques : Série électrotechnique et énergetique, pp. 157-181, 52, [Article]

Petrovic, L. and Binder, A. and Deak, C. and Irimie, D. and Reicher, K. and Purcarea, C. (2007):
Numerical methods for calculation of eddy current losses in permanent magnets of synchronous machines.
In: ISEF, Prague, 13-15 September 2007, S. 275 (digest), full paper 6 pages (CD-ROM), publ. in IOS Press: Advanced Computer Techniques in Applied Electromagnetics, paper no. B 1-3, [Conference or Workshop Item]

Mütze, A. and Binder, A. (2007):
Practical rules for assessment of inverter-induced bearing currents in inverter-fed AC-motors up to 500 kW.
In: IEEE Transactions on Industry Electronics Magazine, 54, [Article]

Magdun, O. and Binder, A. and Rocks, A. and Henze, O. (2007):
Prediction of common mode ground current in motors of inverter-based drive systems.
In: Proceedings of the international aegean conference on electrical machines and power electronics (ACEMP) 2007, 10-12 September, Bodrum, turkey, S. 806-811, [Conference or Workshop Item]

Knopik, T. and Binder, A. and Güllich, P. (2007):
Rotor angle detection via shaft iron remanence for the blancing process of small rotors.
In: Proceedings of the 6th IEEE International symposium on diagnostics for electric machines, power electronics and drives (IEEE sdemped 2007), 6-8 September, Krakau, Polen s. 291-296 (CD-ROM), [Conference or Workshop Item]

Binder, A. and Mütze, A. (2007):
Scaling Effects of Inverter-Induced Bearing Currents in AC Machines.
In: Proceedings of the International Electric Machines and Drives Conference (IEMDC), 03.-05.05.2007, Antalya, Turkey, S 1477-1483. (CD-ROM)., [Conference or Workshop Item]

Chevailler, S. and Feng, Lin and Binder, A. (2007):
Short-Circuit Faults in Distributed and Concentrated Windings of PM Synchronous Motors.
In: Proceedings of the 12th European Conference on Power Electronics and Applications, (epe) 2007, 2-5 September, Aalborg, Denmark, 10 Pages (CD-ROM), [Conference or Workshop Item]

Cui, X. and Binder, A. and Schlemmer, E. (2007):
Straight-Flow Permanent Magnet Synchronous Generator Design for Small Hydro Power Plants.
In: Procedings of the International Conference on Clean Electrical Power Renewable Energy Resources Impact (ICCEP), 21.-23.05.2007, Capri, Italy, p. 323-328 (CD-ROM)., [Conference or Workshop Item]

Mütze, A. and Binder, A. (2007):
Techniques for measurement of parameters related to inverter-induced bearing currents.
In: IEEE Transactions on Industry Applications, pp. 1274-1283, 43, [Article]

Gholizad, H. and Funieru, Bogdan and Binder, A. and Mirsalim, M. (2007):
A modified magnetic equivalent circuit method for calculating the motional eddy current.
In: Proceedings of the 6th international Symposium on linear drives for industrial applications (LDIA) 2007, September 16-19, Lille, France, S. 37-38, [Conference or Workshop Item]

Henze, O. and Rocks, A. and De Gersem, Herbert and Weiland, Thomas and Hinrichsen, V. and Binder, A. (2007):
A network model for inverter-fed induction-motor drives.
In: Proceedings of the 12th European conference on Power Electronics and Applications (epe) 2007, 2-5 September, Aalborg, Denmark, 9 Seiten (CD-ROM), [Conference or Workshop Item]

2006

Neudorfer, H. and Binder, A. and Wicker, N. (2006):
Analyse von unterschiedlichen Fahrzyklen für den Einsatz von Elektrofahrzeugen.
In: Elektrotechnik und Informationstechnik : e & i (0932-383X), pp. 352-360, 123, [Article]

Rastogi, A. and Binder, A. (2006):
Analytical versus Numerical magnet circuit calculation of PM machines at high load saturation.
In: Proceedings of the 17th International Conference on Electrical Machines (ICEM), 2.-5.9.2006, Chania, Greece, 6 pages, CD-ROM, [Conference or Workshop Item]

Cui, X. and Funieru, Bogdan and Binder, A. (2006):
Calculation of No-Load Additional Losses in the Rotor of StrafloMatrixTM Synchronous Turbine-Generators.
In: Proceedings of the Symposium. on Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM), 23.-26.5.2006, Taormina, Italy, 6 pages, S. 3-33 - S3-38., [Conference or Workshop Item]

Binder, A. and Muetze, A. (2006):
Calculation of influence of insulated Bearings and insulated Inner Bearing Seats on Circulating BearingcCurrents in Machines of Inverter-Based Drive Sstems.
In: IEEE Transactions on Industry Applications, pp. 965-972, 42, [Article]

Binder, A. and Neudorfer, H. and Wicker, N. (2006):
Computational Investigation of two Hybrid Vehicle Energy Managements.
In: Automobiltechnische Zeitschrift : ATZ, pp. 22-25, 108, [Article]

Deak, C. and Binder, A. (2006):
Design of Compact Permanent-Magnet Synchronous Motors with Concentrated Windings.
In: Proceedings of the 10th Internationalal Conference on Optimisation of Electrical and Electronic Equipment (OPTIM), 18.-19.5.2006, Brasov, Romania, S. 9-14, [Conference or Workshop Item]

Schneider, T. and Binder, A. and Chen, L. (2006):
Design procedure of bearingless high-speed permanent magnet motors.
In: Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, A. Krawczyk et al. (Eds.), IOS Press, 2006, S. 473-478, [Book Section]

Muetze, A. and Binder, A. (2006):
DonÁt Lose Your Bearings - Mitigation techniques for bearing currents in inverter-supplied drive systems.
In: IEEE IAS Magazine, pp. 22-31, 12, [Article]

Binder, A. and Deak, C. and Schneider, T. (2006):
Erhöhung der Drehmomentdichte elektrischer Permanentmagnetmotoren durch Einsatz von Zahnspulentechnologie und intensivierter Kühlung.
In: 5. Technischer Tag der VEM-Gruppe, 12.-13.9.2006, Wernigerode, CD-ROM., [Conference or Workshop Item]

Feng, L. and Binder, A. and Rentschler, A. and Paweletz, A. and Guenther, D. (2006):
Fault Investigation of X-by-wire Permanent Magnet Synchronous Machine.
In: Proceedings of the CES/IEEE-PELS 5th International Power Electronics and Motion Control Conference; 14-16-8.2006, Shanghai, China, Vol. 2, p. 843-847, [Conference or Workshop Item]

Feng, Lin and Rentschler, A. and Binder, A. and Paweletz, A. (2006):
Fault model of an Inverter-fed PM motor for x-by-wire systems.
In: Proceedings of 4th IFAC Symposium on Mechatronic Systems, 12.-14.9.2006, Heidelberg, Germany, p. 205-210, [Conference or Workshop Item]

De Gersem, Herbert and Mütze, A. and Binder, A. and Weiland, Thomas (2006):
Finite Element Simulation of the Common-Mode Flux in Inverted-fed Induction Machines.
In: Proceedings of the 6th International Conference on Computational Electromagnetics (CEM), 4.-6.4.2006, Aachen, Germany, S .107-108, [Conference or Workshop Item]

De Gersem, Herbert and Muetze, A. and Binder, A. and Weiland, Thomas (2006):
Finite-Element Simulation of the Common-Mode Flux in Inverted-Fed Induction Machines.
In: Proceedings of the 6th International Conference on Computation in Electromagnetics, April 2006, S. 107-108, [Conference or Workshop Item]

Binder, A. and Schneider, T. and Klohr, M. (2006):
Fixation of Buried and Surface Mounted Magnets in High-Speed Permanent-Magnet Synchronous Machines.
In: IEEE Transactions on Industry Applications, pp. 1031-1037, 42, [Article]

Deak, C. and Binder, A. (2006):
Highly utilised Permanent Magnet Synchronous Machines with Tooth-wound Coils for Industrial Applications.
In: Electromotion, pp. 36-41, 13, [Article]

Binder, A. and Schneider, T. and Redemann, Ch. (2006):
Lagerlose Motoren - eine Zukunftstechnologie ?
In: Proceedings of the ASB Congress (Antreiben- Steuern -Bewegen), 21.-22.2.2006, Stuttgart, Germany, 12 pages, CD-ROM, [Conference or Workshop Item]

Binder, A. and Schneider, T. (2006):
Leichtere Elektromotoren durch Hochausnutzung von Werkstoffen.
In: thema Forschung, pp. 68-72, [Article]

Deak, C. and Binder, A. and Magyari, K. (2006):
Magnet Loss Analysis of Permanent-Magnet Synchronous Motors with Concentrated Windings.
In: Proceedings of the 17th International Conference on Electrical Machines (ICEM), 2.-5.9.2006, Chania, Greece, 6 pages, CD-ROM, [Conference or Workshop Item]

Binder, A. and Sabirin, C. R. and Popa, D. D. and Craciunescu, A. (2006):
Modeling and Control of an Active Magnetic Bearing System.
In: Proceedings of the 10th Internaional Conference on Optimisation of Electrical and Electronic Equipment (OPTIM), 18.-19.5.2006, Brasov, Romania, S.37-44., [Conference or Workshop Item]

Gautam, N. and Rentschler, A. and Schneider, T. and Binder, A. (2006):
Modeling and analysis of parallel connected permanent magnet synchronous generators in a small hydropower plant.
In: WSEAS Transactions on Power Systems, pp. 825-830, 1, [Article]

Cui, X. and Funieru, Bogdan and Binder, A. (2006):
PM Generator No-Load Additional Loss Calculation Using FE Models with an Equivalent Current Layer.
In: Proceedings of the 6th International Conference on Computational Electromagnetics (CEM), 4.-6.4.2006, Aachen, Germany, S. 103-104, [Conference or Workshop Item]

Neudorfer, H. and Wicker, N. and Binder, A. (2006):
Rechnerische Untersuchung von zwei Energiemanagements für Hybridfahrzeuge.
In: Automobiltechnische Zeitschrift : ATZ, pp. 502-509, 108, [Article]

Werner, U. and Binder, A. (2006):
Rotor dynamic analysis of asynchronous machines including the Finite-Element-Method for engineering low vibration motors.
In: Proceedings of the Symposium on Power Electronics, Electrical Drives, Automation & Motion (SPEEDAM), 23.-26.5.2006, Taormina, Italy, p. 33-20 - S33-28., [Conference or Workshop Item]

Werner, U. and Binder, A. (2006):
Rotordynamische Auslegung von überkritisch betriebenen Asynchronmaschinen unter Berücksichtigung der Fundamentsteifigkeit.
In: Tagungsband der Konferenz "Elektrisch-mechanische Antriebssysteme", 27.-28.9.2006, Böblingen, VDI-Berichte 1963, VDI-Verlag, p. 533-546., [Conference or Workshop Item]

Muetze, A. and Binder, A. and Vogel, H. and Hering, J. (2006):
What can bearings bear? - How much current is too much?
In: IEEE IAS Magazine, pp. 57-64, 12, [Article]

2001

Koch, Thomas and Binder, A. (2001):
Energy saving with high speed trains propelled by direct permanent magnet synchronous drive.
In: PCIM 2001: International Power Electronics Confernce <2001, Nürnberg>; Proceedings. S. 263-268, [Conference or Workshop Item]

Lu, Tong and Binder, A. (2001):
Experimental investigation of the additional losses in permanent magnet high-speed machines under inverter operation.
In: KIEE/EMECS: Spring Annual Conference 2001: The International Session on EHV Class GCB/GIS Technology & High Speed Rotating Machine Technology <2001, Jeju, Korea>; Proceedings. B-10 - B-15, [Conference or Workshop Item]

Hofmann, Martina and Binder, A. and Pfeiffer, R. (2001):
Investigations of a linear induction machine for railway applications.
In: IEEE-IEMDC 2001: International Electric Machines and Drives Conference <2001, Cambridge, Mass.>:Proceedings. S. 20-26, [Conference or Workshop Item]

Koch, Thomas and Binder, A. (2001):
Permanent magnet synchronous direct drive for high speed trains.
In: ELECTROMOTION: International Symposium on Advanced Electromechanical Motion Systems <4, 2001, Bologna>; Proceedings Vol.1, S. 287-292, [Conference or Workshop Item]

2000

Hofmann, Martina and Werle, T. and Binder, A. and Pfeiffer, R. (2000):
Asynchronous linear machine for railway systems.
In: ICEM 2000: International Conference on Electrical Machines <2000, Espoo, Finland>; Proceedings. S. 223-227, [Conference or Workshop Item]

Schätzer, Christoph and Binder, A. (2000):
Design optimization of a high-speed permanent magnet machine with the VEKOPT algorithm.
In: IEEE-IAS Annual Meeting <2000, Rome>: Tagungsbd., [Conference or Workshop Item]

Anders, Markus and Binder, A. (2000):
Dynamic model of an airborne permanent magnet direct telescope drive.
Düsseldorf, VDI/VDE-Ges., In: IFAC-Conference on Mechatronic Systems <1, 2000, Darmstadt>: Proceedings. Hrsg.: R. Isermann. - Düsseldorf: VDI/VDE-Ges., 2000. S. 191-196, [Conference or Workshop Item]

Anders, Markus and Schönhoff, Ulrich and Andresen, E.-G. and Binder, A. and Nordmann, Rainer (2000):
Entwicklung des Stellantriebs, Simulation und Optimierung der Bildstabilität für das flugzeuggestützte Infrarotteleskop SOFIA.
In: Thema Forschung, pp. 44-56, [Article]

Lu, Tong and Binder, A. and Pfeiffer, R. (2000):
Rotor losses in permanent magnet high-speed machines.
In: ICEM 2000: International Conference on Electrical Machines <2000, Espoo, Finland>: Proceedings. S. 608-612, [Conference or Workshop Item]

1999

Hofmann, Martina and Werle, T. and Pfeiffer, R. and Binder, A. (1999):
2D und 3D numerical field computation of eddy-current brakes for traction.
In: COMPUMAG'99: Conference on the Computation of Electromagnetic Fields <12, 1999, Sapporo>: Proceedings. S. 752-753, [Conference or Workshop Item]

Anders, Markus and Andresen, E. Ch. and Binder, A. (1999):
Determination of thrust force ripple of a spherical linear PM motor for a direct telescope drive.
In: EPE'99: European Conference on Power Electronics and Applications <8, 1999, Lausanne>: Proceedings. S. 1580-1588, [Conference or Workshop Item]

Anders, Markus and Andresen, E. Ch. and Binder, A. (1999):
Ein sphärischer Linearmotor als Direktantrieb eines optischen Infrarotteleskops.
In: Internationale ETG-Tage '99: München 1999. S. 507-513. - München: VDE-Verl., 1999 (ETG-Fachbericht; 79), München, VDE-Verl., [Book Section]

Jöckel, Andreas and Binder, A. and Körner, O. and Pfeiffer, R. (1999):
Tatzlager-Lokomotivantrieb für 200 km/h.
Berlin, VDE-Verl., In: International Conference Electric Railway Systems <2, 1999, Berlin>. S. 85-89. - Berlin: VDE-Verl., 1999 (ETG-Fachbericht; 74), [Conference or Workshop Item]

Schätzer, Christoph and Binder, A. and Müller, W. (1999):
Vector optimization of a high-speed drive using two-dimensional numerical field calculation.
In: ISEF'99: International Symposium on Electromagnetic Fields in Electrical Engineering <1999, Pavia, Italy>; Proceedings. S. 401-404, [Conference or Workshop Item]

Schätzer, Christoph and Binder, A. and Müller, W. (1999):
A new approach for solving vector optimization problems.
In: COMPUMAG'99: Conference on the Computation of Electromagnetic Fields <12, 1999, Sapporo>: Proceedings. S. 160-161, [Conference or Workshop Item]

Anders, Markus and Andresen, E. Ch. and Binder, A. (1999):
A novel spherical linear PM motor for direct driving infrared optical telescope.
In: IEMDC'99: IEEE International Electric Machines and Drives Conference <1999, Seattle, Wash>: Proceedings. S. 528-530, [Conference or Workshop Item]

This list was generated on Tue Nov 19 01:21:00 2019 CET.