TU Darmstadt / ULB / TUbiblio

Blättern nach Person

Ebene hoch
Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Gruppiere nach: Keine Gruppierung | Typ des Eintrags | Publikationsjahr | Sprache
Anzahl der Einträge: 14.

Artikel

Sun, Z. ; Petegem, S. Van ; Cervellino, A. ; Durst, K. ; Blum, W. ; Van Swygenhoven, H. (2015)
Dynamic recovery in nanocrystalline Ni.
In: Acta Materialia, 91
doi: 10.1016/j.actamat.2015.03.033
Artikel, Bibliographie

Blum, W. ; Eisenlohr, P. ; Prell, M. ; Durst, Karsten (2015)
Thermally activated flow in soft and hard regions: Getting information on work hardening strain and recovery strain from rate change tests.
In: KOVOVE MATERIALY-METALLIC MATERIALS, 53 (4)
Artikel, Bibliographie

Wang, Yan ; Mayer, Karl-Heinz ; Scholz, Alfred ; Berger, Christina ; Chilukuru, Hemambar ; Durst, K. ; Blum, W. (2009)
Development of new 11 % Cr heat resistant ferritic steels with enhanced creep resistance for steampower plants with operating steam temperatures up to 650°C.
In: Materials science and engineering A, 510/511
doi: 10.1016/j.msea.2008.04.116
Artikel, Bibliographie

Chilikuru, Hemambar ; Durst, K. ; Wadekar, S. ; Schwienheer, Michael ; Scholz, Alfred ; Berger, Christina ; Mayer, Karl-Heinz ; Blum, W. (2009)
Coarsening of precipitates and degradation of creep resistance in tempered martensite steels.
In: Materials science and engineering A, 510/511
doi: 10.1016/j.msea.2008.04.088
Artikel, Bibliographie

Wang, Y. ; Mayer, K.-H. ; Scholz, A. ; Berger, C. ; Chilukuru, H. ; Durst, Karsten ; Blum, W. (2009)
Development of new 11%Cr heat resistant ferritic steels with enhanced creep resistance for steam power plants with operating steam temperatures up to 650 °C.
In: Materials science and engineering A, 510-511 (C)
doi: 10.1016/j.msea.2008.04.116
Artikel, Bibliographie

Sadrabadi, P. ; Durst, Karsten ; Göken, M. ; Blum, W. (2009)
Quantification of dislocation structures at high resolution by atomic force microscopy of dislocation etch pits.
In: Philosophical Magazine Letters, 89 (6)
doi: 10.1080/09500830902984554
Artikel, Bibliographie

Blum, W. ; Li, Y. J. ; Durst, Karsten (2009)
Stability of ultrafine-grained Cu to subgrain coarsening and recrystallization in annealing and deformation at elevated temperatures.
In: Acta Materialia, 57 (17)
doi: 10.1016/j.actamat.2009.07.030
Artikel, Bibliographie

Dubey, J. S. ; Chilukuru, Hemambar ; Chakravartty, J. K. ; Schwienheer, Michael ; Scholz, Alfred ; Blum, W. (2005)
Effects of cyclic deformation on subgrain evolution and creep in 9-12 % Cr-steels.
In: Materials science and engineering / A, 406
Artikel, Bibliographie

Chilukuru, Hemambar ; Schwienheer, Michael ; Scholz, Alfred ; Blum, W. (2003)
Creep-fatigue interaction in martensitic tempered steels by dynamic subgrain growth.
In: Langzeitverhalten warmfester Stähle und Hochtemperaturwerkstoffe : 26. Vortragsveranstaltung der Arbeitsgemeinschaft für Warmfeste Stähle ... am 28. November 2003 in Düsseldorf.- Düsseldorf: VDEh, 2003.- 126 S.- S. 65-74
Artikel, Bibliographie

Weiße, M. ; Breutinger, F. ; Granacher, Joachim ; Blum, W. (1998)
Deformation of ODS-Fe-20 Cr-5 Al(PM 2000) below the threshold for dislocation glide interpreted in terms of diffuse flow.
In: Scripta Materialia, 38 (7)
doi: 10.1016/S1359-6462(98)00013-X
Artikel, Bibliographie

Konferenzveröffentlichung

Berger, Christina ; Wang, Yan ; Scholz, Alfred ; Mayer, Karl-Heinz ; Blum, W. (2007)
Achievements on alloy development for temperatures up to 650 C of ferritic/martensitic super heat resistant 9-12%Cr steels.
Konferenzveröffentlichung, Bibliographie

Wang, Y. ; Scholz, Alfred ; Berger, Christina ; Mayer, Karl-Heinz ; Chilukuru, H. ; Durst, K. ; Blum, W. (2006)
Development of super heat resistant ferritic steels for environmental-friendly fossile-fired steam power plants with operating steam temperatures up to 650°C.
Konferenzveröffentlichung, Bibliographie

Agamennone, R. ; Berger, Christina ; Blum, W. ; Ehlers, J. ; Ennis, P. J. ; Granacher, Joachim ; Inden, G. ; Knezevic, Vida ; Quadakkers, J. W. ; Sauthoff, G. ; Scholz, Alfred ; Singheiser, L. ; Vilk, J. ; Wang, Yan (2002)
Martensitic, ferritic super heat-resistant 650 °C steels.
Konferenzveröffentlichung, Bibliographie

Knezevic, Vida ; Sauthoff, G. ; Vilk, J. ; Inden, G. ; Agamennone, R. ; Blum, W. ; Wang, Yan ; Scholz, Alfred ; Berger, Christina ; Ehlers, J. ; Singheiser, L. (2002)
Martensitic, ferritic super heat-resistant 650 °C steels : design and testing of model alloys.
Konferenzveröffentlichung, Bibliographie

Diese Liste wurde am Tue Mar 26 02:31:44 2024 CET generiert.