A

Arabmaldar, A. ; Sahoo, B.K. ; Ghiyasi, M. (2023)
A generalized robust data envelopment analysis model based on directional distance function.
In: European Journal of Operational Research, 311 (2)
doi: 10.1016/j.ejor.2023.05.005
Article

Akhundov, Najmaddin ; Tahirov, Nail ; Glock, C. H. (2022)
Optimal Scheduling of Waitstaff with Different Experience Levels at a Restaurant Chain.
In: Informs Journal on Applied Analytics, 52 (4)
doi: 10.1287/inte.2022.1124
Article

Arabmaldar, A. ; Mensah, E.K. ; Toloo, M. (2021)
Robust worst-practice interval DEA with non-discretionary factors.
In: Expert Systems with Applications, 182 (115256)
doi: 10.1016/j.eswa.2021.115256
Article

Abedinnia, Hamid (2019)
New Solution Approaches for Scheduling Problems in Production and Logistics.
Technische Universität
Ph.D. Thesis, Primary publication

Abedinnia, Hamid ; Glock, C. H. ; Schneider, M. ; Grosse, E. H. (2017)
Machine scheduling problems in production: A tertiary study.
In: Computers & Industrial Engineering, 111
Article

AlDurgham, M. ; Adegbola, K. ; Glock, C. H. (2017)
A single-vendor single-manufacturer integrated inventory model with stochastic demand and variable production rate.
In: International Journal of Production Economics, 191
doi: 10.1016/j.ijpe.2017.05.017
Article

Arabmaldar, A. ; Jablonsky, J. ; Hosseinzadeh Saljooghi, F. (2017)
A new robust DEA model and super-efficiency measure.
In: Optimization : A Journal of Mathematical Programming and Operations Research, 66 (5)
doi: 10.1080/02331934.2017.1295047
Article

Abedinnia, Hamid ; Glock, C. H. ; Schneider, Michael (2017)
Machine scheduling in production: a content analysis.
In: Applied Mathematical Modelling, 50
doi: 10.1016/j.apm.2017.05.016
Article

Abedinnia, Hamid ; Moghaddamkia, Hoda ; Glock, C. H. (2016)
A joint economic lot size model under continuously increasing purchase prices of raw materials.
The 2016 International Supply Chain Management Symposium (SCMA). Niagara Falls, Kanada (14.-15.06.2016)
Conference or Workshop Item

Abedinnia, Hamid ; Glock, C. H. ; Brill, A (2016)
New Simple Constructive Heuristic Algorithms for Minimizing Total Flow-Time in the Permutation Flowshop Scheduling Problem.
In: Computers & Operations Research, 74
Article

B

Best, J. ; Glock, C. H. ; Grosse, E. H. ; Rekik, Y. ; Syntetos, A (2022)
On the causes of positive inventory discrepancies in retail stores.
In: International Journal of Physical Distribution & Logistics Management, 52 (5/6)
doi: 10.1108/IJPDLM-07-2021-0291
Article

Bier, Tobias (2022)
A Network Perspective in Supply Chain Risk Management.
Technische Universität
doi: 10.26083/tuprints-00020332
Ph.D. Thesis, Primary publication, Publisher's Version

Battini, D. ; Finco, S ; Katiraee, N ; Grosse, E. H. ; Glock, C. H. (2021)
Active ageing workforce in manufacturing systems: an international discussion.
21st Triennial Congress of the International Ergonomics Association (IEA2021). Vancouver, Canada + Online
Conference or Workshop Item

Beck, F. G. ; Glock, C. H. (2021)
A dynamic programming approach for solving the economic lot scheduling problem with batch shipments.
In: International Journal of Operational Research, 40 (3)
doi: 10.1504/IJOR.2021.114305
Article

Beck, F. G. ; Glock, C. H. (2019)
The economic lot scheduling problem: a content analysis.
In: International Journal of Production Research, 58/2020 (11)
doi: 10.1080/00207543.2019.1668071
Article

Batarfi, R. ; Jaber, M. Y. ; Glock, C. H. (2019)
Pricing and inventory decisions in a dual channel supply chain with learning and forgetting.
In: Computers & Industrial Engineering, 136
doi: 10.1016/j.cie.2019.07.034
Article

Bartolini, M. ; Bottani, E. ; Grosse, E. H. (2019)
Green warehousing: systematic literature review and bibliometric analysis.
In: Journal of Cleaner Production, 226
doi: 10.1016/j.jclepro.2019.04.055
Article

Beck, Fabian Günter (2019)
An investigation of production and transportation policies for multi-item and multi-stage production systems.
Technische Universität
Ph.D. Thesis, Primary publication

Bier, Tobias ; Lange, Anne ; Glock, C. H. (2019)
Methods for mitigating disruptions in complex supply chain structures: A systematic literature review.
In: International Journal of Production Research, Volume 58 (6)
Article

Beck, F. G. ; Biel, K. ; Glock, C. H. (2019)
Integration of energy aspects into the economic lot scheduling Problem.
In: International Journal of Production Economics, 209
doi: 10.1016/j.ijpe.2018.02.012
Article

Biel, K. ; Zhao, F. ; Sutherland, J. ; Glock, C. H. (2018)
Flow shop scheduling with grid-integrated onsite wind power using stochastic MILP.
In: International Journal of Production Research, 56 (5)
Article

Biel, K. ; Glock, C. H. (2018)
Governing the dynamics of multi-stage production systems subject to learning and forgetting effects: A simulation study.
In: International Journal of Production Research, 56 (10)
Article

Beck, F. G. ; Glock, C. H. ; Kim, T. (2017)
Coordination of a production network with a single buyer and multiple vendors with geometrically increasing batch shipments.
In: International Journal of Production Economics, 193
doi: 10.1016/j.ijpe.2017.07.015
Article

Biel, K. ; Glock, C. H. (2017)
Prerequisites of efficient decentralized waste heat recovery and energy storage in production planning.
In: Journal of Business Economics, 87 (1)
Article

Biel, Konstantin (2017)
Multi-stage production planning with special consideration of energy supply and demand.
Technische Universität
Ph.D. Thesis, Primary publication

Biel, K. ; Ellenrieder, D. ; Kiesel, F. ; Ries, J. M. (2016)
Analysis of mergers and acquisitions in the airline industry - Learning from investor reactions.
In: Supply Chain Management, 16 (2)
Article

Biel, K. ; Glock, C. H. (2016)
On the use of waste heat in a two-stage production system with controllable production rates.
In: International Journal of Production Economics, 181
Article

Biel, K. ; Glock, C. H. (2016)
Systematic literature review of decision support models for energy-efficient production planning.
In: Computers & Industrial Engineering, 101
Article

Beck, F. G. ; Glock, C. H.
eds.: Dessouky, Mohamed I. ; Kacem, Imed (2016)
The impact of batch shipments on the economic lot scheduling problem.
International Conference on Computers & Industrial Engineering, CIE45. Metz (28. - 30.10.2015)
Conference or Workshop Item

Biel, K. ; Ries, J. M. (2015)
Recent advances in operations research towards efficient airline management.
In: Supply Chain Management, (III/2015)
Article

C

Castellano, D. ; Glock, C.H. (2022)
Economic production quantity with inventory rationing for a decaying item.
10th IFAC Conference on Manufacturing Modelling, Management and Control (MIM 2022). Nantes, France (22-24 June 2022)
doi: 10.1016/j.ifacol.2022.10.188
Conference or Workshop Item

Castellano, D. ; Glock, C. H. (2021)
The average-cost formulation of lot sizing models and inventory carrying charges: a technical note.
In: Operations Management Research, 2021 (14)
doi: 10.1007/s12063-021-00191-2
Article

Calzavara, M. ; Glock, C. H. ; Grosse, E. H. ; Sgarbossa, F. (2019)
An integrated storage assignment method for manual order picking warehouses considering cost, workload and posture.
In: International Journal of Production Research, 57 (8)
doi: 10.1080/00207543.2018.1518609
Article

Calzavara, M. ; Sgarbossa, F. ; Grosse, E. H. ; Glock, C. H.
eds.: Bousonville, T. ; Melo, T. ; Rezg, N. ; Vernadat, F. (2017)
Analytical models for a joint posture and fatigue analysis in order picking.
Proceedings of the International Conference on Industrial Engineering and Systems Management, IESM 2017. Saarbrücken (11. - 13. Oktober 2017)
Conference or Workshop Item

Calzavara, M. ; Glock, C. H. ; Grosse, E. H. ; Persona, A. ; Sgarbossa, F. (2017)
Analysis of economic and ergonomic performance measures of different rack layouts in an order picking warehouse.
In: Computers & Industrial Engineering, 111
doi: 10.1016/j.cie.2016.07.001
Article

D

Diefenbach, H. ; Steinebach, T. ; Glock, C. H. ; Grosse, E.H. ; Wakula, J. (2023)
Wie lassen sich körperliche Belastungen in der Kommissionierung quantifizieren?
In: Betriebliche Prävention, 135 (3/23)
doi: 10.37307/j.2365-7634.2023.03.04
Article

Diefenbach, Heiko ; Emde, Simon ; Glock, C. H. (2023)
Multi-depot electric vehicle scheduling in in-plant production logistics considering non-linear charging models.
In: European Journal of Operational Research, 306 (2)
doi: 10.1016/j.ejor.2022.06.050
Article

Diefenbach, Heiko (2023)
New solution approaches for optimization problems with combinatorial aspects in logistics management.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023863
Ph.D. Thesis, Primary publication, Publisher's Version

Diefenbach, H. ; Emde, S. ; Glock, C. H. ; Grosse, E. H. (2022)
New solution procedures for the order picker routing problem in U-shaped pick areas with a movable depot.
In: OR Spectrum, 44 (2)
doi: 10.1007/s00291-021-00663-8
Article

Diefenbach, H. ; Erlemann, N. ; Lunin, A ; Grosse, E.H. ; Schocke, K.-O. ; Glock, C.H. (2021)
Improving processes and ergonomics at air freight handling agents: a case study.
In: International Journal of Logistics Research and Applications, 26 (4)
doi: 10.1080/13675567.2021.1958305
Article

Diefenbach, H. ; Erlemann, N. ; Lunin, A. ; Grosse, E. H. ; Schocke, K.-O. ; Glock, C. H. (2021)
An analysis of processes and economic as well as ergonomic improvement potentials at air freight forwarders.
5th Interdisciplinary Conference on Production, Logistics and Traffic (ICPLT). Darmstadt, Virtual Conference (17.-18.03.2021)
Conference or Workshop Item

Diefenbach, H. ; Erlemann, N. ; Lunin, A. ; Grosse, E.H. ; Schocke, K.-O. ; Glock, C. H. (2020)
Physische Belastungen und mögliche Gegenmaßnahmen in der Luftfrachtabfertigung.
In: Betriebliche Prävention, 133 (01/21)
doi: 10.37307/j.2365-7634.2021.01.05
Article

Diefenbach, H. ; Glock, C. H. (2020)
Ökonomisch und ergonomisch optimierte Gestaltung von U-förmigen Kommissionierlagern.
In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (9)
doi: 10.3139/104.112167
Article

Diefenbach, Heiko ; Emde, Simon ; Glock, C. H. (2020)
Loading tow trains ergonomically for just-in-time part supply.
In: European Journal of Operational Research, 284 (1)
doi: 10.1016/j.ejor.2019.12.009
Article

Diefenbach, Heiko ; Glock, C. H. (2019)
Ergonomic and economic optimization of layout and item assignment of a U-shaped order picking zone.
In: Computers & Industrial Engineering, (138)
doi: 10.1016/j.cie.2019.106094
Article

E

Elbert, R. ; Glock, C. H. ; Weidinger, F. ; Pisch, F. ; Pfohl, H.-C. (2022)
Intelligente Lösungen auf Lager - Innovationen für die riesigen Warenversanddepots.
In: hoch3. Die Zeitung der TU Darmstadt, 18 (3)
Article

Erlemann, N. ; Diefenbach, H. ; Lunin, A. ; Grosse, E.-H. ; Glock, C. H. ; Schocke, K.-O. (2021)
So wird die Luftfracht effizienter: Prozessineffizienzen und mögliche Gegenmaßnahmen in der Luftfrachtabfertigung.
In: Logistik für Unternehmen
Article

Emde, S. ; Tahirov, N. ; Gendreau, M. ; Glock, C. H. (2021)
Routing automated lane-guided transport vehicles in a warehouse handling returns.
In: European Journal of Operational Research, 292
doi: 10.1016/j.ejor.2020.11.038
Article

Emde, Simon ; Abedinnia, Hamid ; Lange, Anne ; Glock, C. H. (2020)
Scheduling personnel for the build-up of unit load devices at an air cargo terminal with limited space.
In: OR Spectrum, 42
Article

Emde, Simon ; Abedinnia, Hamid ; Glock, C. H. (2018)
Scheduling electric vehicles making milk-runs for just-in-time delivery.
In: IISE Transactions
doi: 10.1080/24725854.2018.1479899
Article

Emde, Simon ; Boysen, Nils
eds.: Glock, C. H. ; Grosse, E. H. (2017)
Kommissionierung mithilfe mobiler Lagerroboter.
In: Warehousing 4.0: Technische Lösungen und Managementkonzepte für die Lagerlogistik der Zukunft
Book Section

Elbert, R. ; Franzke, T. ; Glock, C. H. ; Grosse, E. H. (2017)
The effects of human behavior on the efficiency of routing policies in order picking: the case of route deviations.
In: Computers & Industrial Engineering, 111
doi: 10.1016/J.CIE.2016.11.033
Article

Eppler, Stephanie (2015)
Allocation Planning for Demand Fulfillment in Make-to-Stock Industries - A Stochastic Linear Programming Approach.
TU Darmstadt
Ph.D. Thesis, Primary publication

Elbert, R. ; Franzke, T. ; Glock, C. H. ; Grosse, E. H. (2015)
Agent-based Analysis of Picker Blocking in Manual Order Picking Systems: Effects of Routing Combinations on Throughput Time.
In: Proceedings of the 2015 Winter Simulation Conference / ed. by L. Yilmaz et al
Book Section

F

Füchtenhans, M. ; Glock, C.H. (2023)
Laststeuerungsprogramme am Beispiel der Maschinenbelegungsplanung.
In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 118 (7-8)
doi: 10.1515/zwf-2023-1082
Article

Füchtenhans, M. ; Glock, C.H.
Arten und Nutzenpotenziale von Laststeuerungsprogrammen.
In: PERSPEKTIVEN. Die Fachpublikation des House of Energy., 2022/2023
Article

Füchtenhans, M. ; Glock, C.H. ; Grosse, E.H. ; Zanoni, S. (2023)
Using smart lighting systems to reduce energy costs in warehouses: A simulation study.
In: International Journal of Logistics Research and Applications, 26 (1)
doi: 10.1080/13675567.2021.1937967
Article

Füchtenhans, M. ; Glock, C.H. (2022)
Energy-efficient job shop scheduling considering processing speed and incentive-based programs.
10th IFAC Conference on Manufacturing Modelling, Management and Control (MIM 2022). Nantes, France (22-24 June 2022)
doi: 10.1016/j.ifacol.2022.09.389
Conference or Workshop Item

Füchtenhans, M. ; Grosse, E. H. ; Glock, C. H. (2021)
Smart lighting systems: state-of-the-art and potential applications in warehouse order picking.
In: International Journal of Production Research, 59 (12)
doi: 10.1080/00207543.2021.1897177
Article

Füchtenhans, M. ; Grosse, E. H. ; Glock, C. H. (2020)
Verbesserung der Energieeffizienz im Lager durch intelligente Beleuchtungssysteme.
In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (4)
doi: 10.3139/104.112263
Article

Füchtenhans, M. ; Grosse, E. H. ; Glock, C. H. (2019)
Use cases and potentials of smart lighting systems in industrial settings.
In: IEEE Engineering Management Review, 47 (4)
doi: 10.1109/EMR.2019.2947371
Article

Fontana Granotto, G. ; Sgarbossa, F. ; Glock, C. H. ; Grosse, E. H. (2019)
The Effect of Worker Fatigue on the Performance of a Bucket Brigade Order Picking System.
9th IFAC Conference on Manufacturing Modelling, Management and Control (MIM 2019). (28.-30. August 2019)
Conference or Workshop Item

Füchtenhans, M. ; Grosse, E. H. ; Glock, C. H. (2019)
Applications for smart lighting systems in production and logistics: a structured literature review.
9th IFAC Conference on Manufacturing Modelling, Management and Control (MIM 2019). (28.-30. August 2019)
Conference or Workshop Item

Füchtenhans, M. ; Glock, C. H. ; Grosse, E. H. ; Schmidt, Kevin (2019)
Intelligente Beleuchtung mit Anwendungspotenzial.
In: MM LOGISTIK, (4/2019)
Article

Feldman, A. ; Neumann, W. P. ; Grosse, E. H. ; Glock, C. H. (2019)
The use of assistive devices for manual materials handling in warehouses: a systematic literature review.
The 24th International Symposium on Logistics (ISL 2019). (14.-17.07.2019)
Conference or Workshop Item

Füchtenhans, M. ; Glock, C. H. ; Grosse, E. H. ; Dagdagan, G. (2019)
Reducing energy cost in warehouses via smart lighting systems: a simulation study.
The 24th International Symposium on Logistics (ISL 2019). (14.-17.07.2019)
Conference or Workshop Item

Füchtenhans, M. ; Grosse, E. H. ; Glock, C. H. (2019)
Literature review on smart lighting systems and their application in industrial settings.
6th International Conference on Control, Decision and Information Technologies. Paris, France (23.-26.04.2019)
Conference or Workshop Item

Füchtenhans, M. ; Schmidt, Kevin ; Grosse, E. H. ; Glock, C. H. (2019)
Nutzenpotenziale intelligenter Beleuchtungssysteme für Fabrikbetriebe.
In: Fabriksoftware, 24 (1)
doi: 10.30844/FS19-1_21-24
Article

Fleischmann, B. ; Meyr, H. ; Wagner, M.
eds.: Stadtler, H. ; Kilger, C. (2007)
Advanced Planning.
In: Supply Chain Management and Advanced Planning
Book Section

Fleischmann, B. ; Meyr, H. (2003)
Planning Hierarchy, Modeling and Advanced Planning Systems.
In: Handbooks in Operations Research and Management Science, 11
Article

Fleischmann, B. ; Meyr, H.
eds.: Dyckhoff, H. ; Lackes, R. ; Reese, J. (2003)
Customer Orientation in Advanced Planning Systems.
In: Supply Chain Management and Reverse Logistics
Book Section

Fleischmann, B. ; Meyr, H.
eds.: Sebastian, H.-J. ; Grünert, T. (2001)
Supply Chain Planning.
In: Logistik Management - Supply Chain Management und e-Business
Book Section

Fleischmann, B. ; Meyr, H. (1997)
The General Lotsizing and Scheduling Problem.
In: OR Spectrum, 19 (1)
Article

G

Giri, B. C. ; Glock, C. H. (2022)
The bullwhip effect in a manufacturing/remanufacturing supply chain under a price-induced non-standard ARMA(1,1) demand process.
In: European Journal of Operational Research, 301 (2)
doi: 10.1016/j.ejor.2021.10.025
Article

Goltsos, T. .E. ; Syntetos, A ; Glock, C. H. ; Ioannou, G (2022)
Inventory – forecasting: Mind the gap.
In: European Journal of Operational Research, 299 (2)
doi: 10.1016/j.ejor.2021.07.040
Article

Glock, C. H. ; Grosse, E. H.
eds.: Chibanguza, K ; Kuß, C ; Steege, H (2022)
Integration von Drohnen in betriebswirtschaftliche Prozesse am Beispiel der Logistik.
In: Künstliche Intelligenz – Recht und Praxis automatisierter und autonomer Systeme.
Book Section

Glock, C. H. (2021)
Production and Supply Chain Management. An Introduction.
Book

Glock, C. H. ; Grosse, E. H. ; Neumann, W. P. ; Feldmann, A. (2020)
Assistive devices for manual materials handling in warehouses: a systematic literature review.
In: International Journal of Production Research, 59/2021 (11)
doi: 10.1080/00207543.2020.1853845
Article

Glock, C. H. (2020)
Ein bisschen Schwund ist immer- Wie sich fehlerhafte Daten von Lagerbeständen auf Unternehmen wirtschaftlich auswirken.
In: Best in Procurement BIP, 11 (2)
Article

Glock, C. H. (2020)
Zahlt sich Datenqualität aus?
In: Logistik Heute, 42 (3)
Article

Glock, C. H. ; Rekik, Y. ; Ries, J. M. (2020)
A coordination mechanism for supply chains with capacity expansions and order-dependent lead times.
In: European Journal of Operational Research, 185 (1)
Article

Glock, C. H. ; Grosse, E. H. (2020)
The impact of controllable production rates on the performance of inventory systems: A systematic review of the literature.
In: European Journal of Operational Research, 288 (3)
doi: 10.1016/j.ejor.2020.05.033
Article

Glock, C. H. ; Grosse, E. H. ; Jaber, M. Y. ; Smunt, T. L. (2019)
Applications of learning curves in production and operations management: A systematic literature review.
In: Computers & Industrial Engineering, 131
Article

Glock, C. H. ; Grosse, E. H. ; Jaber, M. Y. ; Smunt, T. L. (2019)
Editorial: Novel applications of learning curves in production planning and logistics.
In: Computers & Industrial Engineering, 131
Article

Glock, C. H. ; Grosse, E. H. ; Abedinnia, Hamid ; Emde, Simon (2019)
An integrated model to improve ergonomic and economic performance in order picking by rotating pallets.
In: European Journal of Operational Research, (271)
Article

Glock, C. H. ; Grosse, E. H. ; Kim, T. ; Neumann, W. P. ; Sobhani, A. (2019)
An integrated cost and worker fatigue evaluation model of a packaging process.
In: International Journal of Production Economics, 207
Article

Glock, C. H. ; Rekik, Y. ; Syntetos, A. (2019)
Modelling (and learning from) inventory inaccuracies in e-retailing/B2B contexts.
In: Decision Sciences, 50 (6)
doi: 10.1111/deci.12367
Article

Glock, C. H. ; Grosse, E. H. ; Jaber, M. Y. ; Smunt, T. L. (2019)
Applications of learning curves in production and operations management: A systematic literature review.
In: Computers & Industrial Engineering, 131
doi: 10.1016/j.cie.2018.10.030
Article

Glock, C. H. ; Grosse, E. H. (2018)
The influence of variable production rates on the lot-sizing decision: a structured review of the literature.
Twentieth International Working Seminar on Production Economics. Innsbruck, Österreich (19.-23. Februar 2018)
Conference or Workshop Item

Glock, C. H. ; Grosse, E. H. ; Ries, J. M. (2017)
Decision support models for supplier development: systematic literature review and research agenda.
In: International Journal of Production Economics, 193
Article

Glock, C. H. ; Grosse, E. H. ; Neumann, W. P. ; Sgarbossa, F. (2017)
Editorial: Human factors in industrial and logistic system design.
In: Computers & Industrial Engineering, 111
doi: 10.1016/J.CIE.2017.08.014
Article

Giri, B. C. ; Glock, C. H. (2017)
A closed-loop supply chain with stochastic product returns and worker experience under learning and forgetting.
In: International Journal of Production Research, 55 (22)
doi: 10.1080/00207543.2017.1347301
Article

Glock, C. H. ; Lange, Anne ; Grosse, E. H. ; Das, A. (2017)
Celebrating the 10th volume of IJISM: A bibliographic review and outlook.
In: International Journal of Integrated Supply Management, 11 (4)
Article

Glock, C. H. (2016)
Training suppliers by delegating workers: A decision support model.
In: Computers & Industrial Engineering, 93
doi: 10.1016/j.cie.2016.01.005
Article

Glock, C. H. ; Kim, T. (2015)
The effect of forward integration on a single-vendor-multi-retailer supply chain under retailer competition.
In: International Journal of Production Economics, (164)
doi: 10.1016/j.ijpe.2015.03.009
Article

Glock, C. H. ; Hochrein, S. (2011)
Purchasing Organization and Design: A Literature Review.
In: BuR - Business Research, 4 (2)
Article

Günther, H. O. ; Meyr, H. (2009)
Supply chain planning and Advanced Planning Systems.
In: OR Spectrum, 31 (1)
Article

H

Hatami-Marbini, A. ; Arabmaldar, A. ; Toloo, Mehdi ; Nehrani, A.M. (2022)
Robust non-radial data envelopment analysis models under data uncertainty.
In: Expert Systems with Applications, 207 (118023)
doi: 10.1016/j.eswa.2022.118023
Article

Hatami-Marbini, A. ; Arabmaldar, A. ; Otu Asu, J. (2022)
Robust productivity growth and efficiency measurement with undesirable outputs: evidence from the oil industry.
In: OR Spectrum, 44
doi: 10.1007/s00291-022-00683-y
Article

Hagemann, V. ; Meinecke, J. ; Schaper, M. ; Debbing, C.E. ; Ruiner, C. ; Klumpp, M. ; Hesenius, M. (2021)
Mental Stress and Strain Assessment in Digital Work. The Measurement Instrument MESTAT for Employees and Leaders.
In: Zeitschrift für Arbeits- und Organisationspsychologie, 67 (1)
doi: 10.1026/0932-4089/a000387
Article

Hatami-Marbini, A. ; Arabmaldar, A. (2021)
Robustness of Farrell cost efficiency measurement under data perturbations: Evidence from a US manufacturing application.
In: European Journal of Operational Researc, 295 (2)
doi: 10.1016/j.ejor.2021.03.019
Article

Heydari, J. ; Rastegar, M. ; Glock, C. H. (2017)
A two-level delay in payments contract for supply chain coordination: The case of credit-dependent demand.
In: International Journal of Production Economics, 191
doi: 10.1016/j.ijpe.2017.05.004
Article

Hochrein, S. ; Muther, M. ; Glock, C. H. (2017)
Strategy alignment in purchasing and supply management: a systematic literature review and research framework on the performance impact.
In: International Journal of Integrated Supply Management, 11 (1)
Article

Haberleitner, H. ; Meyr, H. ; Taudes, A. (2010)
Implementation of a demand planning system using advance order information.
In: International Journal of Production Economics, 128 (2)
Article

J

Jeong, J. ; Glock, C.H. ; Kim, T. (2023)
Ramp-up planning for alternative product portfolios in a multi-product-multi-stage production system.
In: Computers & Industrial Engineering, (182)
doi: 10.1016/j.cie.2023.109390
Article

Jaber, M. Y. ; Peltokorpi, J. ; Glock, C. H. ; Grosse, E. H. ; Pusic, M. (2021)
Adjustment for cognitive interference enhances the predictability of the power learning curve.
In: International Journal of Production Economics, 234 (108045)
doi: 10.1016/j.ijpe.2021.108045
Article

Justus, Nicolas (2018)
Ein Planungssystem für Zulieferer in der Maschinenbaubranche : Entwicklung eines einheitlichen Branchen-Workflows von ETO bis MTS.
TU Darmstadt
Ph.D. Thesis

K

Kim, T. ; Glock, C. H. ; Emde, Simon (2021)
Production planning for a ramp-up process in a multi-stage production system with worker learning and growth in demand.
In: International Journal of Production Research, 2021 (59)
doi: 10.1080/00207543.2020.1798034
Article

Kübler, Patrick ; Glock, C. H. ; Bauernhansl, Thomas (2020)
A new iterative method for solving the joint dynamic storage location assignment, order batching and picker routing problem in manual picker-to-parts warehouses.
In: Computers & Industrial Engineering, 147
doi: 10.1016/j.cie.2020.106645
Article

Kim, T. ; Glock, C. H. (2018)
Production planning for a two-stage production system with multiple parallel machines and variable production rates.
In: International Journal of Production Economics, 196
Article

Köhler, Holger (2011)
Supply Chain Risiken im Low Cost Country Sourcing : Reduktion von Lieferrisiken in China und der Türkei.
TU Darmstadt
Ph.D. Thesis

Kauder, S. ; Meyr, H. (2009)
Strategic network planning for an international automotive manufacturer.
In: OR Spectrum, 31 (3)
Article

Kilger, C. ; Meyr, H.
eds.: Stadtler, H. ; Kilger, C. (2007)
Demand Fulfilment and ATP.
In: Supply Chain Management and Advanced Planning
Book Section

L

Lunin, Alexander ; Glock, C. H. (2021)
Systematic review of Kinect-based solutions for physical risk assessment in manual materials handling in industrial and laboratory environments.
In: Computers & Industrial Engineering, 162
doi: 10.1016/j.cie.2021.107660
Article

Link, Sandra ; Kloberdanz, Hermann ; Denz, Naemi (2014)
Criticality of Resources from a Business Perspective: Extending Existing Approaches.
Conference Sustainable Innovation 2014. KADK, Copenhagen, Denmark (03. + 04.11.2014)
Conference or Workshop Item

Lautenschläger, Matthias (1999)
Mittelfristige Produktionsprogrammplanung mit auslastungsabhängigen Vorlaufzeiten.
TU Darmstadt
Ph.D. Thesis

M

Masae, Makusee ; Vichitkunakorn, Panupong ; Emde, Simon ; Glock, C. H. ; Grosse, E. H. (2021)
Locating charging stations and routing drones for efficient automated stocktaking in warehouses.
25th International Symposium on Logistics (ISL 2021). Online (12.-13.07.2021)
Conference or Workshop Item

Masae, M. ; Glock, C. H. ; Vichitkunakorn, P. (2021)
A method for efficiently routing order pickers in the leaf warehouse.
In: International Journal of Production Economics, Volume 234 (108069)
doi: 10.1016/j.ijpe.2021.108069
Article

Masae, Makusee ; Glock, C. H. ; Vichitkunakorn, Panupong (2020)
Optimal Order Picker Routing in a Conventional Warehouse with Two Blocks and Arbitrary Starting and Ending Points of a Tour.
In: International Journal of Production Research, 58 (17)
doi: 10.1080/00207543.2020.1724342
Article

Masae, Makusee (2020)
Developing efficient order picker routing policies in manual picker-to-parts order picking systems.
Technische Universität
doi: 10.25534/tuprints-00011290
Ph.D. Thesis, Primary publication

Masae, M. ; Glock, C. H. ; Grosse, E. H. (2019)
Order picker routing in warehouses: A systematic literature review.
In: International Journal of Production Economics, 224/2020 (107564)
doi: 10.1016/j.ijpe.2019.107564
Article

Masae, Makusee ; Glock, C. H. ; Vichitkunakorn, Panupong (2019)
Optimal order picker routing in the chevron warehouse.
In: IISE Transactions, 2020/52 (6)
doi: 10.1080/24725854.2019.1660833
Article

Masae, Makusee ; Panupong, Vichitkunakorn ; Glock, C. H. (2019)
Optimal routing of order pickers in the leaf warehouse.
24th International Symposium on Logistics (ISL 2019). Wurzburg, Germany (14.-17.07.2019)
Conference or Workshop Item

Meisel, Frank ; Glock, C. H. (2018)
Self-induced learning vs. project-based supplier development for production ramp-up with two supply options.
In: International Journal of Production Economics, 198
doi: 10.1016/j.ijpe.2018.01.029
Article

Marchi, B. ; Ries, J. M. ; Zanoni, S. ; Glock, C. H. (2016)
A joint economic lot size model with financial collaboration and uncertain investment opportunity.
In: International Journal of Production Economics, 176
Article

Meyr, H. (2009)
Customer Segmentation, Allocation Planning and Order Promising in Make-to-Stock Production.
In: OR Spectrum, 31 (1)
Article

Meyr, H. (2008)
Clustering Methods for Rationing Limited Resources.
In: Intelligente Systeme zur Entscheidungsunterstützung, Konferenzband zur Teilkonferenz der Multikonferenz Wirtschaftsinformatik München, 26.02.2008-28.02.2008
Article

Meyr, H. ; Stadtler, H.
eds.: Stadtler, H. ; Kilger, C. (2007)
Types of Supply Chains.
In: Supply Chain Management and Advanced Planning
Book Section

Meyr, H. ; Wagner, M. ; Rohde, J.
eds.: Stadtler, H. ; Kilger, C. (2007)
Structure of Advanced Planning Systems.
In: Supply Chain Management and Advanced Planning
Book Section

Meyr, H. ; Rosic, H. ; Seipl, C. ; Wagner, M. ; Wetterauer, U.
eds.: Stadtler, H. ; Kilger, C. (2007)
Architecture of Selected APS.
In: Supply Chain Management and Advanced Planning
Book Section

Meyr, H.
eds.: Stadtler, H. ; Kilger, C. (2007)
Forecast Methods.
In: Supply Chain Management and Advanced Planning
Book Section

Meyr, H. (2004)
Supply chain planning in the German automotive industry.
In: OR Spectrum, 26 (4)
Article

Meyr, H. (2004)
Simultane Losgrößen- und Reihenfolgeplanung bei mehrstufiger kontinuierlicher Fertigung.
In: Zeitschrift für Betriebswirtschaft, 74 (6)
Article

Meyr, H. (2003)
Die Bedeutung von Entkopplungspunkten für die operative Planung von Supply Chains.
In: Zeitschrift für Betriebswirtschaft, 73 (9)
Article

Meyr, H. (2003)
Ein Leitfaden zur Modellierung mit Advanced Planning Systemen.
Other

Meyr, H. (2002)
Simultaneous Lotsizing and Scheduling on Parallel Machines.
In: European Journal of Operational Research, 139 (2)
Article

Meyr, H. (2002)
Kurz- und mittelfristige Planung in der Automobilindustrie zwischen Heute und Morgen (Arbeitspapier).
Other

Meyr, H. ; Schonath, M. ; Schulte, J. (2001)
Materialdisposition bei BMW - Optimierung der Lieferabrufe.
In: Logistik Heute, 3
Article

Meyr, H. (2000)
Einsatzmöglichkeiten und Grenzen von Softwaresystemen für die integrierte optimierende Planung von Supply Chains, Beschreibung des Forschungsvorhabens der Habilitation.
Other

Meyr, H. (2000)
Simultaneous Lotsizing and Scheduling by combining Local Search with Dual Reoptimization.
In: European Journal of Operational Research, 120 (2)
Article

Meyr, H. (1999)
Simultane Losgrößen- und Reihenfolgeplanung für kontinuierliche Produk-tionslinien – Modelle und Methoden im Rahmen des Supply Chain Management.
TU Darmstadt
Ph.D. Thesis

N

Neumann, W. P. ; Winkelhaus, Sven ; Grosse, E. H. ; Glock, C. H. (2021)
A Systems Framework and Approach for Analysing Human Factors Interactions in Innovation and Industry 4.0 & 5.0.
21st Triennial Congress of the International Ergonomics Association (IEA2021). Vancouver, Canada + Online
Conference or Workshop Item

Neumann, W. Patrick ; Winkelhaus, Sven ; Grosse, Eric H. ; Glock, C. H. (2021)
Industry 4.0 and the human factor – A systems framework and analysis methodology for successful development.
In: International Journal of Production Economics, 2021/233
doi: 10.1016/j.ijpe.2020.107992
Article

P

Perona, Marco ; Zheng, Ting ; Adrodegari, Federico ; Ardolino, Marco ; Bacchetti, Andrea (2021)
An exploratory survey on the impacts of Logistics 4.0 on Italian manufacturing companies.
In: International Journal of Logistics Systems and Management, 1 (1)
doi: 10.1504/IJLSM.2021.10040263
Article

Polten, Lukas (2021)
Models and optimization techniques for intralogistic problems in part supply.
Technische Universität
doi: 10.26083/tuprints-00017886
Ph.D. Thesis, Primary publication, Publisher's Version

Q

Quante, R. ; Meyr, H. ; Fleischmann, M. (2009)
Revenue management and demand fulfillment: matching applications, models, and software.
In: OR Spectrum, 31 (1)
Article

R

Ruiner, C. ; Debbing, C.E. ; Hagemann, V. ; Schaper, M. ; Klumpp, M. ; Hesenius, M. (2022)
Job demands and resources when using technologies at work – development of a digital work typology.
In: Employee Relations, 45 (1)
doi: 10.1108/ER-11-2021-0468
Article

Ries, Jörg-Martin (2018)
Impact of economic inventory and payment policies on working capital optimization in purchase-to-pay processes.
Technische Universität
Ph.D. Thesis, Primary publication

Rekik, Y. ; Glock, C. H. ; Syntetos, A. (2017)
Enriching demand forecasts with managerial information to improve inventory replenishment decisions: Exploiting judgment and fostering learning.
In: European Journal of Operational Research, 261
Article

Ries, J. M. ; Glock, C. H. ; Schwindl, K. (2016)
The influence of financial conditions on optimal ordering and payment policies under progressive interest schemes.
In: Omega, 70 (7)
Article

Ries, J. M. ; Glock, C. H. ; Schwindl, K. (2016)
Economic ordering and payment policies under progressive payment schemes and time-value of money.
In: International Journal of Operations and Quantitative Management, 22 (3)
Article

Roitsch, M. ; Meyr, H.
eds.: Stadtler, H. ; Kilger, C. (2007)
Oil Industry.
In: Supply Chain Management and Advanced Planning
Book Section

Rohde, Jens (2005)
Hierarchische Produktionsplanung bei losweiser Fertigung unter Einsatz künstlicher neuronaler Netze.
TU Darmstadt
Ph.D. Thesis

Rohde, Jens (2003)
Basiswissen Wirtschaftsinformatik - Advanced Planning Systems.
In: Das Wirtschaftsstudium, 32
Article

Rohde, J. ; Meyr, H. ; Wagner, M. (2000)
Die Supply Chain Planning Matrix.
In: PPS-Management, 5 (1)
Article

S

Sgarbossa, F. ; Glock, C. H. ; Grosse, E. H. ; Calzavara, M. ; de Koster, René (2022)
The impact of monetary incentives and regulatory focus on worker productivity and learning in order picking.
In: International Journal of Operations & Production Management, 42 (11)
doi: 10.1108/IJOPM-11-2021-0730
Article

Spurk, A. ; Grosse, E. H. ; Schnellbächer, B. ; Glock, C. H. (2022)
Drohnen in der Intralogistik - Chancen und Barrieren.
In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, 117 (7-8)
doi: 10.1515/zwf-2022-1100
Article

Steinebach, Tim ; Wakula, Jurij ; Diefenbach, Heiko ; Glock, Christoph H. ; Grosse, Eric H.
eds.: Goonetilleke, R.S. ; Xiong, S. (2022)
Ergonomic parameters considering physical workload for optimization models in manual order picking.
AHFE International 2022. International Conference - Physical Ergonomics and Human Factors. New York, USA (24-28 July, 2022)
doi: 10.54941/ahfe1002611
Conference or Workshop Item

Setayesh, A. ; Grosse, E. H. ; Glock, C. H. ; Neumann, P. (2022)
Determining the source of human-system errors in manual order picking with respect to human factors.
In: International Journal of Production Research, 60 (20)
doi: 10.1080/00207543.2021.1991022
Article

Schreiber, Markus ; Bausch, Phillip ; Best, Julian ; Metternich, Joachim (2020)
Datenanalyse in Produktionsprozessen. Potenziale und Herausforderungen des Process-Mining-Einsatzes in Theorie und betrieblicher Praxis.
In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (5)
doi: 10.3139/104.112285
Article

Steinebach, Tim ; Grosse, E. H. ; Glock, C. H. ; Wakula, Jurij ; Lunin, Alexander (2020)
Accuracy evaluation of two markerless motion capture systems for measurement of upper extremities: Kinect V2 and Captiv.
In: Human Factors and Ergonomics in Manufacturing & Service Industries, 30 (4)
doi: 10.1002/hfm.20840
Article

Sgarbossa, F. ; Grosse, E. H. ; Neumann, W. P. ; Battini, D. ; Glock, C. H. (2020)
Human factors in production and logistics systems of the future.
In: Annual Reviews in Control, 49
doi: 10.1016/j.arcontrol.2020.04.007
Article

Steinebach, Tim ; Grosse, E. H. ; Glock, C. H. ; Wakula, Jurij ; Lunin, Alexander (2019)
Evaluation der Akkuratheit von markerlosen Motion-Capture-Systemen zur ergonomischen Bewertung von Arbeitsplätzen in der Logistik.
65. GfA-Frühjahrskongress. Dresden (27.02.-01.03.2019)
Conference or Workshop Item

Smunt, T. L. ; Glock, C. H. ; Grosse, E. H. ; Jaber, M. Y. ; Göttmann, S. (2017)
Applications of learning curves in production and operations management: A systematic literature review.
POMS 28th Annual Conference. Seattle, WA (5.-8. Mai 2017)
Conference or Workshop Item

Schneider, Maximilian ; Biel, K. ; Pfaller, S. ; Schaede, Hendrik ; Rinderknecht, Stephan ; Glock, C. H. (2016)
Using inventory models for sizing energy storage systems: An interdisciplinary approach.
In: Journal of Energy Storage, 8
Article

Schneider, Maximilian ; Biel, K. ; Pfaller, S. ; Schaede, Hendrik ; Rinderknecht, Stephan ; Glock, C. H. (2015)
Optimal Sizing of Electrical Energy Storage Systems using Inventory Models.
In: Energy Procedia, 73 (June 2015)
Article

Stadtler, H. ; Kok, A. G. de ; Meyr, H. (2005)
Editorial – in honour of Bernhard Fleischmann.
In: European Journal of Operational Research, 163 (3)
Article

T

Tahirov, Nail (2023)
Designing and Managing Manufacturer Distribution Systems.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023402
Ph.D. Thesis, Primary publication, Publisher's Version

Tahirov, N. ; Glock, C.H. (2022)
Manufacturer encroachment and channel conflicts: A systematic review of the literature.
In: European Journal of Operational Research, 302 (2)
doi: 10.1016/j.ejor.2021.12.006
Article

Tavana, M. ; Toloo, M. ; Aghayi, N. ; Arabmaldar, A. (2021)
A robust cross-efficiency data envelopment analysis model with undesirable outputs.
In: Expert Systems with Applications, 167 (114117)
doi: 10.1016/j.eswa.2020.114117
Article

Tadumadze, Giorgi ; Emde, Simon ; Diefenbach, Heiko (2020)
Exact and heuristic algorithms for scheduling jobs with time windows on unrelated parallel machines.
In: OR Spectrum, 42 (2)
doi: 10.1007/s00291-020-00586-w
Article

Teßmann, R. ; Grosse, E. H. ; Glock, C. H. (2017)
Das Lager vernetzt sich.
In: handling : Hoppenstedt Publishing, Darmstadt, (10)
Article

W

Winkelhaus, S. ; Glock, C.H. ; Grosse, E.H. (2022)
Einfluss der Digitalisierung auf die Arbeitszufriedenheit in Produktion und Logistik.
In: Industrie 4.0 Management, 4 (38)
Article

Winkelhaus, Sven ; Zhang, Minqi ; Grosse, E. H. ; Glock, C. H. (2022)
Hybrid order picking: A simulation model of a joint manual and autonomous order picking system.
In: Computers & Industrial Engineering, 167 (107981)
doi: 10.1016/j.cie.2022.107981
Article

Winkelhaus, S. ; Grosse, E. H. ; Glock, C. H. (2022)
Job satisfaction: An explorative study on work characteristics changes of employees in Intralogistics 4.0.
In: Journal of Business Logistics, 43 (3)
doi: 10.1111/jbl.12296
Article

Winkelhaus, Sven (2022)
The Digital Transformation of Logistics from a Human-Centred Perspective.
Technische Universität
doi: 10.26083/tuprints-00019895
Ph.D. Thesis, Primary publication, Publisher's Version

Winkelhaus, Sven ; Grosse, Eric H. ; Glock, Christoph H. (2022)
Job satisfaction: An explorative study on work characteristics changes of employees in Intralogistics 4.0.
In: Journal of Business Logistics, 43 (3)
doi: 10.26083/tuprints-00022436
Article, Secondary publication, Publisher's Version

Winkelhaus, S. ; Grosse, E. H. ; Neumann, W. P. ; Glock, C. H. (2020)
Industry 4.0 and the Human Factor – A Systems Framework for Successful Development.
21. International Working Seminar on Production Economics. (24.02.2020 - 28.02.2020)
Conference or Workshop Item

Winkelhaus, S. ; Grosse, E. H. (2020)
Logistics 4.0: a systematic review towards a new logistics system.
In: International Journal of Production Research, 58 (1)
doi: 10.1080/00207543.2019.1612964
Article

Winkelhaus, S. ; Grosse, E. H. (2019)
Logistik 4.0 – Paradigmenwandel als Chance für Menschen und Unternehmen.
In: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (10)
doi: 10.3139/104.112157
Article

Winkelhaus, S. ; Grosse, E. H. (2019)
On the Way to Logistics 4.0 - a Systematic Review and Outlook.
9th IFAC Conference on Manufacturing Modelling, Management and Control (MIM 2019). (28.-30. August 2019)
Conference or Workshop Item

Weitzel, Timm ; Glock, C. H. (2019)
Scheduling a Storage-Augmented Discrete Production Facility under Incentive-based Demand Response.
In: International Journal of Production Research, 57 (1)
Article

Wallbach, Sören ; Coleman, Katrin ; Elbert, Ralf ; Benlian, Alexander (2019)
Multi-sided platform diffusion in competitive B2B networks: Inhibiting factors and their impact on network effects.
In: Electronic Markets, 29 (4)
Article

Weitzel, Timm (2018)
Operating Storage-Augmented Energy Systems in Industrial and Residential Applications.
Technische Universität
Ph.D. Thesis, Primary publication

Winkelhaus, S. ; Sgarbossa, F. ; Calzavara, M. ; Grosse, E. H. (2018)
The effects of human fatigue on learning in order picking - an explorative experimental investigation.
In: IFAC PapersOnLine, 51 (11)
Article

Weitzel, Timm ; Glock, C. H. (2018)
Energy Management for Stationary Electric Energy Storage Systems: A Systematic Literature Review.
In: European Journal of Operational Research, 2 (264)
doi: 10.1016/j.ejor.2017.06.052
Article

Weitzel, Timm ; Schneider, Maximilian ; Glock, C. H. ; Löber, Florian ; Rinderknecht, Stephan (2018)
Operating a Storage-Augmented Hybrid Microgrid Considering Battery Aging Costs.
In: Journal of Cleaner Production, 188
doi: 10.1016/j.jclepro.2018.03.296
Article

Winkelhaus, S. ; Sgarbossa, F. ; Calzavara, M. ; Grosse, E. H. (2018)
The effects of human fatigue on learning in order picking: an explorative experimental investigation.
16th IFAC Symposium on Information Control Problems in Manufacturing. Bergamo, Italien (11. - 13. Juni 2018)
Conference or Workshop Item

Weitzel, Timm ; Schneider, Maximilian ; Glock, C. H. ; Rinderknecht, Stephan (2017)
A Stochastic Optimization Model for Energy Management of Storage-Augmented Hybrid Multi-Building Districts Considering Battery Aging Costs.
OR2017 - International Conference on Operations Research. Berlin, Deutschland (6.-8.09.2017)
Conference or Workshop Item

Wetterauer, U. ; Meyr, H.
eds.: Stadtler, H. ; Kilger, C. (2007)
The Implementation Process.
In: Supply Chain Management and Advanced Planning
Book Section

Wagner, M. ; Meyr, H. (2007)
Food and Beverages.
In: Supply Chain Management and Advanced Planning
Book Section

Z

Zhang, Minqi ; Grosse, Eric H. ; Glock, Christoph H. (2023)
Ergonomic and economic evaluation of a collaborative hybrid order picking system.
In: International Journal of Production Economics, 258
doi: 10.1016/j.ijpe.2023.108774
Article

Zhang, Yunrong ; Glock, Christoph H. ; Chen, Zhixiang (2023)
Estimating the participation value of electricity demand-response programmes for a two-stage production system.
In: International Journal of Production Research, 60 (21)
doi: 10.1080/00207543.2021.1992681
Article

Zheng, Ting ; Glock, C. H. ; Grosse, E. H. (2022)
Opportunities for using eye tracking technology in manufacturing and logistics: Systematic literature review and research agenda.
In: Computers & Industrial Engineering, 171 (108444)
doi: 10.1016/j.cie.2022.108444
Article

Zheng, Ting ; Grosse, Eric H. ; Glock, Christoph H. (2022)
Exploring the potentials of using Eye Tracking in logistics: a systematic literature review and concept.
26th International Symposium on Logistics. Cork, Ireland (10-13th July 2022)
Conference or Workshop Item

Zhang, Minqi ; Grosse, Eric H. ; Glock, Christoph H (2022)
Potential of mobile applications in human-centric production and logistics management.
10th IFAC Conference on Manufacturing Modelling, Management and Control (MIM 2022). Nantes, France (22-24 June 2022)
doi: 10.1016/j.ifacol.2022.09.382
Conference or Workshop Item

Zheng, T. ; Füchtenhans, M. ; Glock, C. H. ; Grosse, E. H. (2022)
Eye Tracking – Nutzen für Produktion und Logistik.
In: Factory Innovation, 2 (4)
Article

Zhang, Minqi ; Winkelhaus, Sven ; Grosse, E. H. ; Glock, C. H. (2021)
A simulation model for evaluating the efficiency of robot-supported order picking warehouses.
25th International Symposium on Logistics (ISL 2021). Online (12.-13.07.2021)
Conference or Workshop Item

Zhang, Minqi ; Semar, T ; Grosse, E. H. ; Winkelhaus, Sven ; Glock, C. H. (2021)
Mensch-Roboter-Kollaboration in der Kommissionierung.
In: Zeitschrift für Wirtschaftlichen Fabrikbetrieb : ZWF, 116 (6)
doi: 10.1515/zwf-2021-0107
Article

Zheng, Ting ; Ardolino, Marco ; Bacchetti, Andrea ; Perona, Marco (2021)
The applications of Industry 4.0 technologies in manufacturing context: a systematic literature review.
In: International Journal of Production Research, 59 (6)
doi: 10.1080/00207543.2020.1824085
Article

Zhang, Y ; Hong, Z ; Chen, Z ; Glock, C. H. (2020)
Tax or subsidy? Design and selection of regulatory policies for remanufacturing.
In: European Journal of Operational Research, 287 (3)
doi: 10.1016/j.ejor.2020.05.023
Article

Zheng, Ting ; Ardolino, Marco ; Bacchetti, Andrea ; Perona, Marco ; Zanardini, Massimo (2020)
The impacts of Industry 4.0: a descriptive survey in the Italian manufacturing sector.
In: Journal of Manufacturing Technology Management, (5)
doi: 10.1108/JMTM-08-2018-0269
Article

Zheng, Ting ; Ardolino, M. ; Bacchetti, A. ; Perona, M. (2019)
Enabling technologies, impacts and challenges of “industry 4.0” in the manufacturing context: Some insights from a preliminary literature review.
24th Summer School Francesco Turco, 2019. Brescia, Italy (11.-13.09.2019)
Conference or Workshop Item

Zheng, Ting ; Ardolino, M. ; Bacchetti, A. ; Perona, M. (2018)
Industry 4.0 revolution: State-of-the-art of the Italian manufacturing context.
23rd Summer School "Francesco Turco" - Industrial Systems Engineering 2018. Palermo, Italy (12.-14.09.2018)
Conference or Workshop Item

Zulj, I. ; Glock, C. H. ; Grosse, E. H. ; Schneider, Michael (2018)
Picker routing and storage-assignment strategies for precedence-constrained order picking.
In: Computers & Industrial Engineering, 123
Article

Zhai, Y. ; Biel, K. ; Zhao, F. ; Sutherland, J. W. (2017)
Dynamic scheduling of a flow shop with on-site wind generation for energy cost reduction under real time electricity pricing.
In: CIRP Annals - Manufacturing Technology, 66 (1)
Article

Zander, Robert (2016)
Eignung von Bestellinformationen zur Prognose zukünftiger Nachfrage und Bestimmung des Entkopplungspunkts.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication