TU Darmstadt / ULB / TUbiblio

Blättern nach Person

Ebene hoch
Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Springe zu: Deutsch | Englisch
Anzahl der Einträge: 223.

Deutsch

Schreiber, P. ; Mittelstedt, C. (2022)
Beulanalyse von unsymmetrischen Laminaten mittels geschlossen-analytischer Verfahren.
Deutscher Luft- und Raumfahrtkongress (DLRK). Dresden (27. - 29. September 2022)
Konferenzveröffentlichung, Bibliographie

Meyer, G. ; Georges, H. ; Greiner, M. ; Großmann, A. ; Mittelstedt, C. (2021)
Beitrag zur zuverlässigen Implementierung von additiv gefertigten zellulären Strukturen in Leichtbaustrukturen.
Konferenzveröffentlichung, Bibliographie

Großmann, A. ; Kropholler, L. ; Mölleney, J. ; Frölich, T. ; Gosmann, J. ; Souza, J. ; Mittelstedt, C. (2020)
Fertigungsgetriebene Gestaltung zellulärer Strukturen beim Laserstrahlschmelzen.
Fachtagung Werkstoffe und Additive Fertigung. Potsdam (13.-15. Mai 2020)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Weidmann, J. ; Großmann, A. (2020)
Selektives Laserschmelzen metallischer zellulärer Mesostrukturen in Theorie, Herstellung und Praxis.
Fachtagung Werkstoffe und Additive Fertigung. Potsdam (13.-15. Mai 2020)
Konferenzveröffentlichung, Bibliographie

Klein, Jens ; Schürmann, H. ; Mittelstedt, C. (2019)
Numerische Untersuchung zu lokalen, adhäsiven Krafteinleitungen in die Stirnseite von Faser-Kunststoff-Laminaten.
Deutscher Luft- und Raumfahrtkongress (DLRK). Darmstadt (30.9.-2.10.2019)
Konferenzveröffentlichung, Bibliographie

Dahl, E. ; Schürmann, H. ; Mittelstedt, C. (2019)
Experimentelle Untersuchung eines Einzeldraht-Heizelements zum Widerstandsschweißen kohlenstofffaserverstärkter Polyamid 6 Komponenten.
Deutscher Luft- und Raumfahrtkongress (DLRK). Darmstadt (30.9.-2.10.2019)
Konferenzveröffentlichung, Bibliographie

Schreiber, P. ; Mittelstedt, C. (2018)
Ein neuartiges geschlossen-analytisches Verfahren zur Analyse des lokalen Beulens uniaxial gedrückter Faserverbund-Träger.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. (2018)
Energiemethoden der Elastostatik.
Buch, Bibliographie

Mittelstedt, S. ; Schürg, M. ; Mittelstedt, C. (2018)
Globale Stabilität schubweicher anisotroper hochbelasteter Laminat- und Sandwich-Träger unter kombinierter Belastung im Brücken- und allgemeinen Ingenieurhochbau.
Report, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2017)
Strukturmechanik ebener Laminate.
Buch, Bibliographie

Schürg, M. ; Scheibe, M. ; Mittelstedt, C. (2016)
Anwendungsmöglichkeiten der additiven Fertigung — Entwicklung eines Kabelführungshalters im Seitenleitwerk des Airbus A350.
In: 3. NAFEMS DACH Regionalkonferenz : Berechnung und Simulation : Anwendungen-Entwicklungen-Trends : Tagungsband, Bamberg, 25.-27.4.2016
Buchkapitel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2011)
Laminattheorien höherer Ordnung – Schubdeformationstheorie 1. Ordnung.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-31.
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2011)
Laminattheorien höherer Ordnung – Schubdeformationstheorie 3. Ordnung und lagenweise Theorien.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-32.
Artikel, Bibliographie

Beerhorst, M. ; Mittelstedt, C. ; Flüh, H.-J.
Hrsg.: Hochschule für Angewandte Wissenschaften Hamburg, Department Fahrzeugtechnik und Flugzeugbau (2010)
Analytische Berechnungsverfahren für das Beulverhalten Omega-Stringer-versteifter Laminatplatten.
In: 75 Jahre Flugzeugbaustudium in Hamburg : 1935-2010
Buchkapitel, Bibliographie

Beerhorst, M. ; Seibel, M. ; Mittelstedt, C. (2010)
Beulverhalten des orthotropen Plattenstreifens mit drehelastisch gelagerten unbelasteten Rändern unter kombinierter Druck- und Schubbelastung.
Deutscher Luft- und Raumfahrtkongress (DLRK). Hamburg (31.8.-2.9.2010)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, W. (2010)
Laminattheorien höherer Ordnung - Schubdeformationstheorie 3. Ordnung und schichtweise Theorien.
In: LTH FL - Luftfahrttechnisches Handbuch, Abt. Faserverbund-Leichtbau
Buchkapitel, Bibliographie

Mittelstedt, C. ; Becker, W. (2010)
Laminattheorien höherer Ordnung — Klassische Laminattheorie.
In: LTH FL - Luftfahrttechnisches Handbuch, Abt. Faserverbund-Leichtbau
Buchkapitel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2010)
Lokales Beulen von Composite-Platten mit offenprofiligen Längssteifen – Platten unter Längsdruck.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-25.
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2009)
Beulen ausgesteifter Composite-Platten unter Druckbelastung.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-21.
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2009)
Beulen dreiseitig gelenkig gelagerter gedrückter orthotroper Platten mit Versteifung am freien Rand.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-22.
Artikel, Bibliographie

Mittelstedt, C. (2009)
Beuluntersuchungen an rechteckigen gelenkig gelagerten longitudinal ausgesteiften orthotropen Platten unter Längsdruck — Teil 1: Theorie.
In: Bauingenieur, 84
Artikel, Bibliographie

Mittelstedt, C. (2009)
Beuluntersuchungen an rechteckigen gelenkig gelagerten longitudinal ausgesteiften orthotropen Platten unter Längsdruck — Teil 2: Vergleichsrechnungen und Vorschlag für ein praxistaugliches Rechenverfahren.
In: Bauingenieur, 84
Artikel, Bibliographie

Becker, W. ; Mittelstedt, C. (2009)
Effiziente Analysemöglichkeiten des Laminat-Randeffekts im Composite-Leichtbau.
4. Landshuter Leichtbau-Colloquium. Landshut (26.-27.2.2009)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Beerhorst, M. ; Becker, Wilfried (2009)
Ein Beitrag zur Analyse des Flansch-Beulproblems dünnwandiger anisotroper Composite-Träger.
In: Bauingenieur 84,
Artikel, Bibliographie

Mittelstedt, C. ; Schröder, T. (2009)
Geschlossen-analytische Behandlung des Nachbeulverhaltens von Laminatplatten.
In: Bauingenieur, 84
Artikel, Bibliographie

Becker, Wilfried ; Mittelstedt, C. (2009)
Laminat-Randeffekte.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-16.
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2009)
Nachbeulverhalten imperfekter orthotroper Laminatplatten - Platten mit gelenkig gelagerten oder fest eingespannten unbelasteten Längsrändern unter Längsdruck.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-24.
Artikel, Bibliographie

Becker, Wilfried ; Mittelstedt, C. (2008)
Effiziente Analyse interlaminarer Spannungen in thermomechanisch beanspruchten Composite-Laminaten.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2008)
Flansch-Beulen dünnwandiger Composite-Träger.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau,
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2007)
Free-edge effects in composite laminates.
In: Applied mechanical reviews, 60
Artikel, Bibliographie

Mittelstedt, C. ; Becker, W. (2005)
Modellierung und Analyse des Laminateckeneffektes.
Report, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2004)
A single-layer theory approach to stress concentration phenomena in layered plates.
In: Composites Science and Technology, 64
Artikel, Bibliographie

Mittelstedt, C. ; Becker, W. (2004)
Die Rand-Finite-Elemente-Methode zur Identifikation von 3D-Spannungssingularitäten.
17. Workshop Composite Forschung in der Mechanik. Paderborn (14.-15.12.2004)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2003)
Free-corner effects in cross-ply laminates : an approximate higher-order theory solution.
In: Journal of Composite Materials, 37
Artikel, Bibliographie

Mittelstedt, C. ; Becker, W. (2003)
Eine Variationsformulierung für die Untersuchung von Spannungen und Verschiebungen an kräftefreien Ecken ebener Laminate basierend auf einem schichtweisen Verschiebungsansatz.
16. Workshop Composite Forschung in der Mechanik. Paderborn (1.-3.12.2003)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Brüninghoff, H. (2002)
Biegedrillknicken eines Bogenbinders aus Brettschichtholz.
In: Bautechnik, 79 (5)
doi: 10.1002/bate.200202070
Artikel, Bibliographie

Brüninghoff, H. ; Klapp, H. ; Mittelstedt, C. ; Wiegand, T. (2002)
Entwicklung eines Rechenverfahrens für keilgezinkte Rahmenecken und Biegeträger mit und ohne Zwischenstück aus Brettschichtholz und Holzwerkstoffplatten.
Report, Bibliographie

Mittelstedt, C. ; Becker, W. (2002)
Geschlossen-analytische Untersuchung des Spannungsfeldes an kräftefreien Ecken ebener Laminate.
15. Workshop Composite Forschung in der Mechanik. Berlin (18.-20.11.2002)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Brüninghoff, H. (2002)
Zum Stand der Normung bei der Modellierung und Berechnung von fachwerkartigen Strukturen in Holzbauweise mit flächigen Knotenverbindungen bei besonderer Berücksichtigung von Nagelplattenverbindungen, Teil 2: Vergleichsrechnungen.
In: Bauen mit Holz, (1)
Artikel, Bibliographie

Mittelstedt, C. ; Brüninghoff, H. (2002)
Zur Biegedrillknickproblematik von Bauteilen aus Brettschichtholz am Beispiel der Spandau-Arcaden in Berlin.
In: Jahrbuch Bautechnik
Buchkapitel, Bibliographie

Mittelstedt, C. ; Brüninghoff, H. (2001)
Zum Stand der Normung bei der Modellierung und Berechnung von fachwerkartigen Strukturen in Holzbauweise mit flächigen Knotenverbindungen bei besonderer Berücksichtigung von Nagelplattenverbindungen, Teil 1: Grundlagen.
In: Bauen mit Holz, (12)
Artikel, Bibliographie

Mittelstedt, C. ; Brüninghoff, H. (2001)
Zur Modellierung und Berechnung von fachwerkartigen Strukturen in Holzbauweise nach E DIN 1052 (05.00) bei besonderer Betrachtung von Nagelplatten als Verbindungsmittel.
In: VISION — Beiträge aus Architektur und Bauingenieurwesen / Bergische Universität
Buchkapitel, Bibliographie

Mittelstedt, C. ; Renhof, L. ; Brüninghoff, H. (2000)
Vergleichsrechnungen für Nagelplattenkonstruktionen — Berechnung und Konstruktion nach E DIN 1052 (05.00) und DIN 1052 (04.88).
Report, Bibliographie

Englisch

Hübsch, Jan David ; Demleitner, Martin ; Bard, Simon ; Berendes, Philipp ; Altstädt, Volker ; Mittelstedt, C. (2023)
Influence of Skydrol immersion at elevated temperatures on the thermo‐mechanical properties of a high‐T g anhydride epoxy resin toughened with a hydroxy‐terminated polyester.
In: Journal of Applied Polymer Science, 140 (1)
doi: 10.1002/app.53263
Artikel, Bibliographie

Georges, H. ; Meyer, G. ; Mittelstedt, C. ; Becker, Wilfried (2022)
2D Elasticity solution for sandwich panels with functionally graded lattice cores.
In: Composite Structures, 300
doi: 10.1016/j.compstruct.2022.116045
Artikel, Bibliographie

Alhajahmad, A. ; Mittelstedt, C. (2022)
A novel grid-stiffening concept for locally reinforcing window openings of composite fuselage panels using streamline stiffeners.
In: Thin-Walled Structures, 179
doi: 10.1016/j.tws.2022.109731
Artikel, Bibliographie

Georges, H. ; Großmann, A. ; Mittelstedt, C. ; Becker, Wilfried (2022)
Structural modeling of sandwich panels with additively manufactured strut-based lattice cores.
In: Additive Manufacturing, 55
doi: 10.1016/j.addma.2022.102788
Artikel, Bibliographie

Kappel, A. ; Dillen, S. ; Mittelstedt, C. (2022)
Hygrothermomechanical analysis of the free-edge stress fields in cylindrical cross-ply laminated shells.
In: Mechanics of Advanced Materials and Structures
doi: 10.1080/15376494.2021.2022256
Artikel, Bibliographie

Alhajahmad, A. ; Mittelstedt, C. (2022)
Buckling capacity of composite panels with cutouts using continuous curvilinear fibres and stiffeners based on streamlines.
In: Composite Structures, 281
doi: 10.1016/j.compstruct.2021.114974
Artikel, Bibliographie

Schreiber, P. ; Mittelstedt, C. (2022)
Buckling of shear-deformable unsymmetrically laminated plates.
In: International Journal of Mechanical Sciences, 218
doi: 10.1016/j.ijmecsci.2021.106995
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried ; Kappel, A. ; Kharghani, N. (2022)
Free-Edge Effects in Composite Laminates—A Review of Recent Developments 2005-2020.
In: Applied Mechanics Reviews, 74 (1)
doi: 10.1115/1.4054145
Artikel, Bibliographie

Schilling, Jakob C. ; Atamann, D. ; Voges, J. ; Mittelstedt, C. (2022)
Local buckling of omega-stringer-stiffened composite panels under compression–shear interaction.
In: Thin-Walled Structures, 180
doi: 10.1016/j.tws.2022.109838
Artikel, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2022)
Local postbuckling of omega-stringer-stiffened composite panels.
In: Thin-Walled Structures, 181
doi: 10.1016/j.tws.2022.110027
Artikel, Bibliographie

Coluccia, A. ; Jiang, G. ; Meyer, G. ; De Pasquale, G. ; Mittelstedt, C. (2022)
Nonlinear static and dynamic modeling of energy absorption lattice structures behavior.
In: Mechanics of Advanced Materials and Structures
doi: 10.1080/15376494.2022.2064016
Artikel, Bibliographie

Peiler, C. ; Kappel, A. ; Mittelstedt, C. (2021)
Semi-analytical Model for the Close-Range Stress Analysis of Transverse Cracks in Composite Plates.
In: Recent Approaches in the Theory of Plates and Plate-Like Structures
doi: 10.1007/978-3-030-87185-7_16
Buchkapitel, Bibliographie

Georges, H. ; Mittelstedt, C. ; Becker, Wilfried (2021)
Sandwich panels with functionally graded strut‐based lattice cores.
In: PAMM, 21 (1)
doi: 10.1002/pamm.202100029
Artikel, Bibliographie

Alhajahmad, A. ; Mittelstedt, C. (2021)
Buckling and postbuckling performance of composite fuselage panels with cutouts using continuous streamline fibres.
In: International Journal of Mechanical Sciences, 212
doi: 10.1016/j.ijmecsci.2021.106841
Artikel, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2021)
Shear-buckling of omega-stringer-stiffened panels.
In: International Journal of Mechanical Sciences, 207
doi: 10.1016/j.ijmecsci.2021.106646
Artikel, Bibliographie

Großmann, A. ; Klyk, M. ; Kohn, L. ; Mittelstedt, C. (2021)
Scaling precision and build rate in additively manufactured components by melt pool control.
In: Transactions on Additive Manufacturing Meets Medicine, 3 (1)
doi: 10.18416/AMMM.2021.2109496
Artikel, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2021)
Approximate postbuckling analysis of omega-stringer-stiffened composite panels.
Konferenzveröffentlichung, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2021)
Computationally efficient approximate buckling and postbuckling analysis of prismatic composite structures.
Konferenzveröffentlichung, Bibliographie

Klein, J. ; Ihmels, F. ; Schürmann, H. ; Mittelstedt, C. (2021)
Manufacturing influences of the adhesive layer on the load-bearing capacity of anchor bolts for thick FRP laminates.
In: International Journal of Adhesion and Adhesives, 106
doi: 10.1016/j.ijadhadh.2021.102817
Artikel, Bibliographie

Alhajahmad, A. ; Mittelstedt, C. (2021)
Buckling performance of curvilinearly grid-stiffened tow-placed composite panels considering manufacturing constraints.
In: Composite Structures, 260
doi: 10.1016/j.compstruct.2020.113271
Artikel, Bibliographie

Alhajahmad, A. ; Mittelstedt, C. (2021)
Minimum weight design of curvilinearly grid-stiffened variable-stiffness composite fuselage panels considering buckling and manufacturing constraints.
In: Thin-Walled Structures, 161
doi: 10.1016/j.tws.2021.107526
Artikel, Bibliographie

Schreiber, P. ; Mittelstedt, C. ; Beerhorst, Matthias (2021)
Buckling analysis of elastically clamped laminated plates using third--order shear deformation theory.
In: PAMM, 20 (1)
doi: 10.1002/pamm.202000093
Artikel, Bibliographie

Kappel, A. ; Mittelstedt, C. (2021)
Semi-analytical assessment of free-edge stress fields in cylindrically curved cross--ply laminated shells.
In: PAMM, 20 (1)
doi: 10.1002/pamm.202000219
Artikel, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2021)
Studies on the validity of the reduced bending stiffness method for eccentrically stacked laminates.
In: PAMM, 20 (1)
doi: 10.1002/pamm.202000199
Artikel, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2021)
Analytical computational models for buckling and postbuckling of thin-walled stiffened composite panels.
doi: 10.23967/complas.2021.012
Konferenzveröffentlichung, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2021)
Approximate computational model for shear loaded stiffened composite panels.
In: PAMM, 21 (1)
doi: 10.1002/pamm.202100093
Artikel, Bibliographie

Schreiber, P. ; Mittelstedt, C. ; Beerhorst, Matthias (2021)
Buckling analysis of shear-deformable orthotropic laminated plates with rotational restraints.
In: PAMM, 21 (1)
doi: 10.1002/pamm.202100037
Artikel, Bibliographie

Schreiber, P. ; Mittelstedt, C.
Hrsg.: Ferreira, Antonio J.M. (2021)
Closed-form solution for buckling of shear-deformable laminated plates with rotational restraints.
24th International Conference on Composite Structures (ICCS24). Porto (Online) (14-18 Juni 2021)
Konferenzveröffentlichung, Bibliographie

Kappel, A. ; Mittelstedt, C. (2021)
Interlaminar stress fields in circular cylindrical cross-ply laminated shells subjected to transverse loadings.
In: International Journal of Solids and Structures, 228
doi: 10.1016/j.ijsolstr.2021.111096
Artikel, Bibliographie

Coluccia, A. ; De Pasquale, G. ; Meyer, G. ; Mittelstedt, C. (2021)
Modeling of Lattice Structures Energy Absorption under Impact Loads.
doi: 10.1109/ICMAE52228.2021.9522543
Konferenzveröffentlichung, Bibliographie

Kappel, A. ; Mittelstedt, C.
Hrsg.: Radespiel, Rolf ; Semaan, Richard (2021)
Semi-Analytical Approach to the Determination of Free-Edge Stress Fields in Cylindrically Curved Composite Laminated Shells.
In: Fundamentals of High Lift for Future Civil Aircraft
doi: 10.1007/978-3-030-52429-6
Buchkapitel, Bibliographie

Kappel, A. ; Mittelstedt, C. (2021)
Semi‐analytical assessment of free‐edge stress fields in circular cylindrical cross‐ply laminated shells subjected to transverse loads.
In: PAMM, 21 (1)
doi: 10.1002/pamm.202100083
Artikel, Bibliographie

Peiler, C. ; Kappel, A. ; Mittelstedt, C. (2021)
Semi‐analytical method for the stress analysis of transverse cracks in composite structures.
In: PAMM, 21 (1)
doi: 10.1002/pamm.202100129
Artikel, Bibliographie

Dahl, E. ; Schürmann, H. ; Mittelstedt, C. (2020)
A tailored heating element for resistance welding of complex shaped joining surfaces.
In: Journal of Thermoplastic Composite Materials
doi: 10.1177/0892705720982045
Artikel, Bibliographie

Meyer, G. ; Brenne, F. ; Niendorf, T. ; Mittelstedt, C. (2020)
Influence of the Miniaturisation Effect on the Effective Stiffness of Lattice Structures in Additive Manufacturing.
In: Metals, 10 (11)
doi: 10.3390/met10111442
Artikel, Bibliographie

Schreiber, P. ; Mittelstedt, C. ; Beerhorst, Matthias (2020)
Buckling of shear-deformable orthotropic laminated plates with elastic restraints.
In: Thin-Walled Structures, 157
doi: 10.1016/j.tws.2020.107071
Artikel, Bibliographie

Alhajahmad, A. ; Mittelstedt, C. (2020)
Design tailoring of curvilinearly grid-stiffened variable-stiffness composite cylindrically curved panels for maximum buckling capacity.
In: Thin-Walled Structures, 157
doi: 10.1016/j.tws.2020.107132
Artikel, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C.
Hrsg.: Altenbach, Holm ; Chinchaladze, Natalia ; Kienzler, Reinhold ; Müller, Wolfgang H. (2020)
Validity of the Reduced Bending Stiffness Method for Stacked Laminates.
In: Analysis of Shells, Plates, and Beams: A State of the Art Report
doi: 10.1007/978-3-030-47491-1_21
Buchkapitel, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2020)
A simple closed-form analytical model for the column buckling of omega-stinger-stiffened panels with periodic boundary conditions.
In: Results in Engineering, 6
doi: 10.1016/j.rineng.2020.100120
Artikel, Bibliographie

Weidmann, J. ; Großmann, A. ; Mittelstedt, C. (2020)
Laser Powder Bed Fusion Manufacturing of Aluminum Honeycomb Structures: Theory and Testing.
In: International Journal of Mechanical Sciences, 180
doi: 10.1016/j.ijmecsci.2020.105639
Artikel, Bibliographie

Kappel, A. ; Mittelstedt, C. (2020)
Free-edge stress fields in cylindrically curved cross-ply laminated shells.
In: Composites Part B: Engineering, 183 (4)
doi: 10.1016/j.compositesb.2019.107693
Artikel, Bibliographie

Schilling, Jakob C. ; Mittelstedt, C. (2020)
Local buckling analysis of omega-stringer-stiffened composite panels using a new closed-form analytical approximate solution.
In: Thin-Walled Structures, 147
doi: 10.1016/j.tws.2019.106534
Artikel, Bibliographie

Mittelstedt, S. ; Mittelstedt, C. (2019)
Mixed-mode buckling of shear-deformable composite laminated I-beams.
In: International Journal of Mechanical Sciences, 2019
doi: 10.1016/j.ijmecsci.2019.105332
Artikel, Bibliographie

Großmann, A. ; Felger, J. ; Frölich, T. ; Gosmann, J. ; Mittelstedt, C. (2019)
Melt pool controlled laser powder bed fusion for customised low-density lattice structures.
In: Materials & Design
doi: 10.1016/j.matdes.2019.108054
Artikel, Bibliographie

Meyer, G. ; Weis, P. ; Großmann, A. ; Clemen, C. ; Mittelstedt, C. (2019)
C-Frame design optimization for selective laser melting.
Deutscher Luft- und Raumfahrtkongress (DLRK). Darmstadt (30.9.-2.10.2019)
Konferenzveröffentlichung, Bibliographie

Weidmann, J. ; Mölleney, A. ; Mittelstedt, C. (2019)
Honeycomb design in selective laser melting with AlSi10Mg.
Deutscher Luft- und Raumfahrtkongress (DLRK). Darmstadt (30.9.-2.10.2019)
Konferenzveröffentlichung, Bibliographie

Großmann, A. ; Felger, J. ; Fröhlich, T. ; Mittelstedt, C. (2019)
Laser driven design for cellular structures in selective laser melting.
Deutscher Luft- und Raumfahrtkongress (DLRK). Darmstadt (30.9.-2.10.2019)
Konferenzveröffentlichung, Bibliographie

Schilling, J. C. ; Mittelstedt, C. (2019)
An explicit analytical approximate solution of the local stability problem for uniaxially loaded omega-stringer-stiffened composite panels.
Deutscher Luft- und Raumfahrtkongress (DLRK). Darmstadt (30.9.-2.10.2019)
Konferenzveröffentlichung, Bibliographie

Großmann, A. ; Gosmann, J. ; Mittelstedt, C. (2019)
Lightweight lattice structures in selective laser melting: Design, fabrication and mechanical properties.
In: Materials Science and Engineering: A, 766
doi: 10.1016/j.msea.2019.138356
Artikel, Bibliographie

Dahl, E. ; Becker, J. S. ; Mittelstedt, C. ; Schürmann, H. (2019)
A new concept for a modular composite pressure vessel design.
In: Composites Part A: Applied Science and Manufacturing, 124
doi: 10.1016/j.compositesa.2019.105475
Artikel, Bibliographie

Klein, J. ; Schürmann, H. ; Mittelstedt, C. (2019)
Numerical study on anchor bolts for load introduction into cross-sectional faces of fiber-reinforced polymer composites.
SAMPE Conference 2019. Nantes (17.-19.9.2019)
Konferenzveröffentlichung, Bibliographie

Dahl, E. ; Becker, J. S. ; Mittelstedt, C. ; Schürmann, H. (2019)
A modular concept for thermoplastic composite pressure vessels.
SAMPE Conference 2019. Nantes (17.-19.9.2019)
Konferenzveröffentlichung, Bibliographie

Weis, Patrick ; Großmann, A. ; Clemen, Christof ; Mittelstedt, C. (2019)
Optimization and Re-Design of a Metallic Riveting Tool for Selective Laser Melting - A Case Study.
In: Additive Manufacturing, 2019
doi: 10.1016/j.addma.2019.100892
Artikel, Bibliographie

Mittelstedt, C. ; Becker, W. (2019)
Asymptotic analysis of free-edge and free-corner effects in laminate structures.
In: Proceedings in Applied Mathematics and Mechanics (PAMM), 5 (1)
doi: 10.1002/pamm.200510102
Artikel, Bibliographie

Schnabel, J. ; Mittelstedt, C. (2019)
Efficient analysis of stress concentrations in laminated composite structures with geometric discontinuities.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, 18 (1)
doi: 10.1002/pamm.201800046
Artikel, Bibliographie

Großmann, A. ; Mittelstedt, C. (2019)
Lightweight construction with two-dimensional cellular solids in additive manufacturing.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, 18 (1)
doi: 10.1002/pamm.201800007
Artikel, Bibliographie

Mittelstedt, S. ; Mittelstedt, C. (2019)
A higher-order shear deformation approach to the mixed-mode buckling problem in composite laminated beams.
90th GAMM Annual Meeting. Vienna (18.-22.2.2019)
Konferenzveröffentlichung, Bibliographie

Katz, J. ; Klimach, M. ; Haupt, F. ; Brechtel, A. ; Mittelstedt, C. (2019)
Structural optimization and experimental investigation of CFRP lock nuts.
In: Composites Part A — Applied Science and Manufacturing, (117)
doi: 10.1016/j.compositesa.2018.11.004
Artikel, Bibliographie

Schreiber, P. ; Mittelstedt, C. (2019)
Analytical buckling analysis of simply supported symmetric orthotropic thin-walled composite beams under bending load.
5th International Conference on Mechanics of Composites (MechComp). Lissabon (1.-4.7.2019)
Konferenzveröffentlichung, Bibliographie

Schreiber, P. ; Mittelstedt, C. (2019)
Analytical solution of the critical bending load for FRP columns in terms of local stability.
Deutscher Luft- und Raumfahrtkongress (DLRK). Darmstadt (30.9.-2.10.2019)
Konferenzveröffentlichung, Bibliographie

Schreiber, P. ; Mittelstedt, C. (2019)
Closed-form buckling analysis of simply supported orthotropic thin-walled composite laminated beams under bending load.
AST2019 - 7th International Workshop on Aircraft System Technologies. Hamburg (19.-20.2.2019)
Konferenzveröffentlichung, Bibliographie

Li, X. ; Mittelstedt, C. (2019)
Critical considerations for the design of light-weight flywheel rotors with composite materials.
5th International Conference on Mechanics of Composites (MechComp). Lissabon (1.-4.7.2019)
Konferenzveröffentlichung, Bibliographie

Großmann, A. ; Frölich, T. ; Mittelstedt, C. (2019)
Development of holistic scaling laws for melt pool characterization in laser additive manufacturing.
2nd International Conference on Simulation for Additive Manufacturing - Sim-AM 2019. Pavia (11.-13.9.2019)
Konferenzveröffentlichung, Bibliographie

Klein, J. ; Mittelstedt, C. (2019)
Experimental study on anchor bolts for load introduction into cross-sectional faces of fiber-reinforced polymer composites.
5th International Conference on Mechanics of Composites (MechComp). Lissabon (1.-4.7.2019)
Konferenzveröffentlichung, Bibliographie

Dahl, E. ; Schürmann, H. ; Mittelstedt, C. (2019)
Experimental study on resistance welding of carbon-fiber-reinforced polyamide 6 with single wire heating elements.
5th International Conference on Mechanics of Composites (MechComp). Lissabon (1.-4.7.2019)
Konferenzveröffentlichung, Bibliographie

Meyer, G. ; Kropholler, L. ; Frölich, T. ; Mittelstedt, C. (2019)
Influence of the miniaturization effect on the effective stiffness of lattice struts in additive manufacturing.
2nd International Conference on Simulation for Additive Manufacturing - Sim-AM 2019. Pavia (11.-13.9.2019)
Konferenzveröffentlichung, Bibliographie

Meyer, G. ; Brenne, F. ; Niendorf, T. ; Mittelstedt, C.
Hrsg.: Auricchio, Ferdinando (2019)
Influence of the miniaturization effect on the effective stiffness of lattice struts in additive manufacturing.
2nd International Conference on Simulation for Additive Manufacturing - Sim-AM 2019. Pavia (11.-13.09.2019)
Konferenzveröffentlichung, Bibliographie

Großmann, A. ; Frölich, T. ; Mittelstedt, C. (2019)
Material independent characterisation of melt pool geometry in selective laser melting.
AST2019 - International Workshop on Aircraft System Technologies. Hamburg (19.-20.2.2019)
Konferenzveröffentlichung, Bibliographie

Stumpfl, H. S. ; Bauch, V. ; Jeong, E. H. ; Buchmann, L. ; Rau, S. ; Großmann, A. ; Mittelstedt, C. (2019)
Reliable transition design for structural integration of lattice structures in laser additive manufacturing.
Deutscher Luft- und Raumfahrtkongress (DLRK). Darmstadt (30.9.-2.10.2019)
Konferenzveröffentlichung, Bibliographie

Schilling, J. C. ; Mittelstedt, C. (2019)
An approximate closed-form analytical model for the local buckling behavior of omega-stringer-stiffened composite panels.
5th International Conference on Mechanics of Composites (MechComp). Lissabon (1.-4.7.2019)
Konferenzveröffentlichung, Bibliographie

Schilling, J. C. ; Mittelstedt, C. (2019)
A closed-form analytical approach to the local buckling analysis of omega-stringer-stiffened composite panels.
AST2019 - International Workshop on Aircraft System Technologies. Hamburg (19.-20.2.2019)
Konferenzveröffentlichung, Bibliographie

Schreiber, P. ; Mittelstedt, C. (2018)
A New Holistic Approach to the Local Buckling Behaviour of Open-Profile Composite Laminated Beams.
In: PAMM, 18 (1)
doi: 10.1002/pamm.201800015
Artikel, Bibliographie

Schreiber, P. ; Mittelstedt, C. (2018)
A holistic approach for local buckling of composite laminated beams under compressive load.
In: Archive of Applied Mechanics, (Online first)
doi: 10.1007/s00419-018-1496-1
Artikel, Bibliographie

Souza, J. ; Großmann, A. ; Mittelstedt, C. (2018)
Micromechanical analysis of the effective properties of lattice structures in additive manufacturing.
In: Additive Manufacturing, (23)
doi: 10.1016/j.addma.2018.07.007
Artikel, Bibliographie

Hermann, J. ; Kühn, T. ; Mittelstedt, S. ; Mittelstedt, C. (2018)
A higher order shear deformation approach to the local buckling behaviour of moderately thick composite laminated beams.
In: International Journal of Structural Stability and Dynamics, 18 (11)
Artikel, Bibliographie

Herrmann, J. ; Kühn, T. ; Mittelstedt, S. ; Mittelstedt, C. (2018)
Closed-form approximate solutions for the local buckling behavior of composite laminated beams based on third-order shear deformation theory.
In: Advances in Mechanics of Materials and Structural Analysis
doi: 10.1007/978-3-319-70563-7_8
Buchkapitel, Bibliographie

Beerhorst, M. ; Seibel, M. ; Mittelstedt, C. (2018)
Closed-form solution for postbuckling of composite flanges.
ICTWS'18 - The Eighth International Conference on Thin-Walled Structures. Lissabon (24.-27.2018)
Konferenzveröffentlichung, Bibliographie

Meyer, G. ; Mittelstedt, C. ; Landmann, Andreas (2018)
Cost-efficient lightweight design and performance increase of tooling machines through the implementation of fibre reinforced composite components.
ICCS21 : 21st International Conference on Composite Structures. Bologna (4.-7.9.2018)
Konferenzveröffentlichung, Bibliographie

Beerhorst, M. ; Seibel, M. ; Mittelstedt, C. (2018)
Efficient approximate solutions for postbuckling of axially compressed orthotropic plates with rotationally restrained and free longitudinal edges.
In: Archive of Applied Mechanics, 88 (3)
doi: 10.1007/s00419-017-1319-9
Artikel, Bibliographie

Schreiber, P. ; Mittelstedt, C. (2018)
Interactive local buckling of composite laminated beams under compressive load.
Proceedings of the ICCE 26: 26th International Conference on Composites/Nano Engineering. Paris (15.-21.7.2018)
Konferenzveröffentlichung, Bibliographie

Großmann, A. ; Gosmann, J. ; Stumpfl, H. S. ; Mittelstedt, C. (2018)
Lightweight Design and Mechanics of cellular solids in selective laser melting with AlSi10Mg.
IUTAM Symposium on Mechanical design and analysis for AM technologies (AMT 2018). Moskau (20.-25.8.2018)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, S. ; Mittelstedt, C. (2018)
Mixed-mode buckling of thick-walled composite beams.
ICCS21 : 21st International Conference on Composite Structures. Bologna (4.-7.9.2018)
Konferenzveröffentlichung, Bibliographie

Klein, J. ; Mittelstedt, C. (2018)
On the design of anchor bolts for load introductions in continuous fiber-reinforced plastics.
ICCS21 : 21st International Conference on Composite Structures. Bologna (4.-7.9.2018)
Konferenzveröffentlichung, Bibliographie

Großmann, A. ; Souza, J. ; Gosmann, J. ; Mittelstedt, C. (2018)
On the mechanics of lattice structures in selective laser melting.
ICCS21 : 21st International Conference on Composite Structures. Bologna (4.-7.9.2018)
Konferenzveröffentlichung, Bibliographie

Dahl, E. ; Becker, J. S. ; Mittelstedt, C. ; Schürmann, H. (2018)
An alternative concept for pressure vessels made of fiber-reinforced thermoplastics.
ICCS21 : 21st International Conference on Composite Structures. Bologna (4.-7.9.2018)
Konferenzveröffentlichung, Bibliographie

Schnabel, J. ; Yousfi, M. ; Mittelstedt, C. (2017)
Free-edge effects in curved composite laminated structures with arbitrary unsymmetric layups under bending load.
In: Composite Structures, (180)
doi: 10.1016/j.compstruct.2017.08.002
Artikel, Bibliographie

Herrmann, J. ; Kühn, T. ; Müllenstedt, T. ; Mittelstedt, S. ; Mittelstedt, C. (2017)
Local buckling of laminated composite beams based on different plate theories.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, 17 (1)
doi: 10.1002/pamm.201710136
Artikel, Bibliographie

Schnabel, Jan Eike ; Yousfi, Mejdi ; Mittelstedt, C. (2017)
Free-edge stress fields in cylindrically curved symmetric and unsymmetric cross-ply laminates under bending load.
In: Composite Structures, 180
doi: 10.1016/j.compstruct.2017.08.002
Artikel, Bibliographie

Schnabel, J. ; Mittelstedt, C. (2017)
Interlaminar stress concentrations at composite plate-doubler junctions using a layerwise analysis approach.
ICCS20 — 20th International Conference on Composite Structures. Paris (4.-7.9.2017)
Konferenzveröffentlichung, Bibliographie

Herrmann, J. ; Kühn, T. ; Mittelstedt, S. ; Mittelstedt, C. (2017)
Local buckling analysis of composite laminated beams using several laminated plate theories.
ICCS20 — 20th International Conference on Composite Structures. Paris (4.-7.9.2017)
Konferenzveröffentlichung, Bibliographie

Herrmann, J. ; Kühn, T. ; Mittelstedt, S. ; Mittelstedt, C. (2017)
Local buckling of composite laminated beams accounting for transverse shear deformations.
SAMPE — Society for the Advancement of Material and Process Engineering — Conference. Stuttgart (14.-16.11.2017)
Konferenzveröffentlichung, Bibliographie

Großmann, A. ; Souza, J. ; Mittelstedt, C. (2017)
Mechanics of cellular solids and lattices and their lightweight potential in additive manufacturing.
Proceedings of the SAMPE — Society for the Advancement of Material and Process Engineering — Conference. Stuttgart (14.-16.11.2017)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2016)
Interlaminar Stress Concentrations in Layered Structures: Part I - A Selective Literature Survey on the Free-Edge Effect since 1967.
In: Journal of Composite Materials, 38 (12)
doi: 10.1177/0021998304040566
Artikel, Bibliographie

Castro, Saullo G.P. ; Mittelstedt, C. ; Monteiro, Francisco A.C. ; Degenhardt, Richard ; Ziegmann, Gerhard (2015)
Evaluation of non-linear buckling loads of geometrically imperfect composite cylinders and cones with the Ritz method.
In: Composite Structures, 122
doi: 10.1016/j.compstruct.2014.11.050
Artikel, Bibliographie

Baucke, A. ; Mittelstedt, C. (2015)
Explicit buckling analysis of composite laminated plates under compression taking bending-twisting-coupling into account.
In: Composite Structures, 128
Artikel, Bibliographie

Baucke, A. ; Mittelstedt, C. (2015)
Influence of bending-twisting-coupling on the buckling behavior of composite laminated plates - a new look at an old problem.
3rd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures. Braunschweig (25.-27.3.2015)
Konferenzveröffentlichung, Bibliographie

Castro, S. G. P. ; Mittelstedt, C. ; Arbelo, M. A. ; Degenhardt, R. ; Khakimova, R. ; Hilburger, M. (2015)
Non-linear buckling response of unstiffened laminated composite cylinders using different geometric imperfections.
3rd Int. Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures. Braunschweig (25.-27.3.2015)
Konferenzveröffentlichung, Bibliographie

Castro, Saullo G.P. ; Mittelstedt, C. ; Monteiro, Francisco A.C. ; Arbelo, Mariano A. ; Degenhardt, Richard ; Ziegmann, Gerhard (2015)
A semi-analytical approach for linear and non-linear analysis of unstiffened laminated composite cylinders and cones under axial, torsion and pressure loads.
In: Thin-Walled Structures, 90
doi: 10.1016/j.tws.2015.01.002
Artikel, Bibliographie

Castro, S. ; Mittelstedt, C. ; Degenhardt, R. (2014)
General purpose implementation of the Ritz Method for structural analysis.
54th Israel Annual Conference on Aerospace Sciences (IACAS2014). Haifa/Tel Aviv (19.-20.2.2014)
Konferenzveröffentlichung, Bibliographie

Castro, S. ; Mittelstedt, C. ; Monteiro, F. (2014)
Linear buckling predictions of unstiffened laminated composite cylinders and cones under various loading and boundary conditions using semi-analytical models.
In: Composite Structures, 118
Artikel, Bibliographie

Kühn, T. ; Pasternak, H. ; Mittelstedt, C. ; Monteiro, F. (2014)
Local buckling of shear-deformable laminated composite beams with arbitrary cross-sections using discrete plate analysis.
In: Composite Structures, 113
Artikel, Bibliographie

Castro, S. ; Mittelstedt, C. ; Monteiro, F. A. C. ; Arbelo, M. A. ; Khakimova, R. ; Degenhardt, R. (2014)
The Ritz method applied to the advanced single perturbation load approach for laminated composite cylinders and cones.
European conference on spacecraft structures, materials & environmental testing. Braunschweig (1.-4.4.2014)
Konferenzveröffentlichung, Bibliographie

Castro, S. ; Mittelstedt, C. ; Monteiro, F. A. C. ; Arbelo, M. A. ; Khakimova, R. ; Degenhardt, R. (2014)
Ritz method for the analysis of unstiffened laminated composite cylinders and cones under axial compression.
First International Conference on Mechanics of Composites (MECHCOMP2014). Stony Brook (8.-12.6.2014)
Konferenzveröffentlichung, Bibliographie

Butzke, J. ; Mittelstedt, C. (2014)
Semi-analytical modelling and analysis of the interlaminar stress fields at junctions between composite plates and doublers.
In: Composite Structures, 118
Artikel, Bibliographie

Mittelstedt, C. (2012)
Buckling and postbuckling of thin-walled stiffened composite panels : efficient analysis methods for lightweight engineering.
Habilitation, Bibliographie

Weißgraeber, Philipp ; Mittelstedt, C. ; Becker, Wilfried (2012)
Buckling of composite panels: A criterion for optimum stiffener design.
In: Aerospace Science and Technology 16.
Artikel, Bibliographie

Beerhorst, M. ; Seibel, M. ; Mittelstedt, C. (2012)
Fast analytical method describing the postbuckling behavior of long, symmetric, balanced laminated composite plates under biaxial compression and shear.
In: Composite Structures, 94 (6)
doi: 10.1016/j.compstruct.2012.01.026
Artikel, Bibliographie

Beerhorst, M. ; Seibel, M. ; Mittelstedt, C. (2011)
Buckling Behavior of an Orthotropic Plate Strip Under Combined Compression and Shear.
In: Journal of Aircraft, 48 (4)
doi: 10.2514/1.C031284
Artikel, Bibliographie

Weißgraeber, Philipp ; Mittelstedt, C. ; Becker, Wilfried (2011)
Buckling behavior and minimum stiffness requirements of composite plates with edge reinforcements.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-34.
Artikel, Bibliographie

Baucke, A. ; Mittelstedt, C. (2011)
Buckling behaviour of composite plates under uniaxial compression taking bending-twisting coupling into account.
In: LTH FL - Luftfahrttechnisches Handbuch, Abt. Faserverbund-Leichtbau
Buchkapitel, Bibliographie

Beerhorst, M. ; Seibel, M. ; Mittelstedt, C.
Hrsg.: Altenbach, Holm ; Eremeyev, Victor A. (2011)
Closed-form approximate solution for the postbuckling behaviour of orthotropic shallow shells under axial compression.
In: Shell-like Structures — Nonclassical Theories and Applications
Buchkapitel, Bibliographie

Mittelstedt, C. ; Erdmann, H. ; Schröder, K.-U. (2011)
Equations facilitate analysis: an efficient closed-form postbuckling analysis method for an orthotropic laminated composite plate under shear load.
3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Hannover (21.-23.9.2011)
Konferenzveröffentlichung, Bibliographie

Kühn, T. ; Pasternak, H. ; Mittelstedt, C. (2011)
Explicit Local Buckling Analysis of Webs and Flanges of Composite Box-Beams accounting for Transverse Shear Deformation Effects.
ICCS16: 16th International Conference on Composite Structures. Porto (28.-30.6.2011)
Konferenzveröffentlichung, Bibliographie

Beerhorst, M. ; Seibel, M. ; Mittelstedt, C. (2011)
Explicit local buckling analysis of stiffened composite panels under combined compression and shear accounting for stiffener-plate interaction based on a unit-cell concept.
3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Hannover (21.-23.9.2011)
Konferenzveröffentlichung, Bibliographie

Schröder, K.-U. ; Mittelstedt, C. (2011)
Geometrically Nonlinear Approximate Solution for the Circumferential Buckling Problem in Hat-Stringer-Stiffened Composite Fuselage Panels.
3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Hannover (21.-23.9.2011)
Konferenzveröffentlichung, Bibliographie

Kühn, T. ; Pasternak, H. ; Mittelstedt, C. (2011)
Local web-buckling of shear-deformable laminated composite beams using discrete plate analysis.
3rd ECCOMAS Thematic Conference on the Mechanical Response of Composites. Hannover (21.-23.9.2011)
Konferenzveröffentlichung, Bibliographie

Weißgraeber, Philipp ; Mittelstedt, C. ; Becker, Wilfried (2011)
On the determination of edge reinforcement properties for optimum lightweight design of composite stiffeners.
In: Shell-like Structures — Nonclassical Theories and Applications, Series Advanced Structured Materials Vol. 15. Hrsg.: H. Altenbach und V. Eremeyev. Springer.
Artikel, Bibliographie

Mittelstedt, C. ; Erdmann, Henrike ; Schröder, Kai-Uwe (2011)
Postbuckling of imperfect rectangular composite plates under inplane shear closed-form approximate solutions.
In: Archive of Applied Mechanics, 81 (10)
doi: 10.1007/s00419-010-0491-y
Artikel, Bibliographie

Mittelstedt, C. ; Erdmann, H. ; Schröder, K.-U. (2011)
A closed-form solution for the postbuckling behaviour of composite plate strips under inplane shear load.
ICCS16: 16th International Conference on Composite Structures. Porto (28.-30.6.2011)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Schröder, K.-U. (2010)
Postbuckling of composite airframe structures: closed-form approximate solutions.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, 10
doi: 10.1002/pamm.201010089
Artikel, Bibliographie

Weißgraeber, Philipp ; Mittelstedt, C. ; Becker, Wilfried (2010)
Buckling behavior and minimum stiffness requirements of composite plates with edge reinforcement and elastic clamping.
Konferenzveröffentlichung, Bibliographie

Weißgraeber, P. ; Mittelstedt, C. ; Becker, W. (2010)
Buckling behavior and minimum stiffness requirements of composite plates with edge reinforcment and elastic clamping.
ECCM14 : 14th European Conference on Composite Materials. Budapest (7.-10.6.2010)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Beerhorst, M. ; Becker, Wilfried (2010)
Buckling of omega-stringer-stiffened composite panels.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-29.
Artikel, Bibliographie

Mittelstedt, C. (2010)
Effective width of simply supported postbuckled orthotropic composite plates under compression.
In: HSB - Handbuch für Strukturberechnung
Buchkapitel, Bibliographie

Werner, S. ; Mittelstedt, C. ; Becker, Wilfried (2010)
Generic buckling curves for stiffened composite plates under inplane shear load.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-28.
Artikel, Bibliographie

Mittelstedt, C. ; Schröder, Kai-Uwe (2010)
Local postbuckling of hat-stringer-stiffened composite laminated plates under transverse compression.
In: Composite Structures, 92 (12)
doi: 10.1016/j.compstruct.2010.04.009
Artikel, Bibliographie

Weißgraeber, P. ; Mittelstedt, C. (2010)
Minimum stiffness requirements of free-edge reinforcements of orthotropic and isotropic plates with elastic clamping.
In: HSB - Handbuch für Strukturberechnung
Buchkapitel, Bibliographie

Mittelstedt, C. ; Schröder, Kai-Uwe (2010)
Postbuckling of compressively loaded imperfect composite plates: closed-form approximate solutions.
In: International Journal of Structural Stability and Dynamics, 10 (4)
doi: 10.1142/S0219455410003725
Artikel, Bibliographie

Mittelstedt, C. ; Erdmann, H. ; Schröder, K.-U. ; Becker, W. (2010)
Postbuckling of imperfect composite laminates under inplane shear — closed-form approximate solutions.
In: LTH FL - Luftfahrttechnisches Handbuch, Abt. Faserverbund-Leichtbau
Buchkapitel, Bibliographie

Mittelstedt, C. ; Erdmann, H. ; Becker, Wilfried ; Schröder, K.-U. (2010)
Postbuckling of imperfect laminate plates under inplane shear — closed-form approximate solutions.
In: Luftfahrttechnisches Handbuch, Faserverbund-Leichtbau, FL 33100-27.
Artikel, Bibliographie

Mittelstedt, C. ; Schagerl, Martin (2010)
A composite view on Windenburg's problem: Buckling and minimum stiffness requirements of compressively loaded orthotropic plates with edge reinforcements.
In: International Journal of Mechanical Sciences, 52 (3)
doi: 10.1016/j.ijmecsci.2009.11.008
Artikel, Bibliographie

Mittelstedt, C. ; Schagerl, M. (2010)
A composite view on Windenburg's problem: buckling and minimum stiffness requirements of orthotropic plates under uniform compression with reinforced edges.
In: International Journal of Mechanical Sciences, (52)
Artikel, Bibliographie

Mittelstedt, C. ; Schagerl, M. (2009)
Explicit Buckling Analysis and Design Equations for Composite Plates under Compression with Free Reinforced Edges.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, 8
doi: 10.1002/pamm.200810313
Artikel, Bibliographie

Beerhorst, M. ; Mittelstedt, C. (2009)
Buckling of compressively loaded orthotropic plates with free and elastically clamped edges.
In: HSB - Handbuch für Strukturberechnung
Buchkapitel, Bibliographie

Mittelstedt, C. ; Beerhorst, Matthias (2009)
Closed-form buckling analysis of compressively loaded composite plates braced by omega-stringers.
In: Composite Structures, 88 (3)
doi: 10.1016/j.compstruct.2008.05.021
Artikel, Bibliographie

Mittelstedt, C. (2009)
Explicit local buckling analysis of stiffened composite plates accounting for periodic boundary conditions and stiffener--plate interaction.
In: Composite Structures, 91 (3)
doi: 10.1016/j.compstruct.2009.04.021
Artikel, Bibliographie

Mittelstedt, C. ; Schröder, K.-U. (2009)
Postbuckling of imperfect composite laminated plates under compression: efficient approaches for lightweight engineering.
4th International Conference on Advances and Trends in Engineering Materials and their Applications. Hamburg (1.-4.9.2009)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2009)
A semi-analytical discretization method for the near-field analysis of unsymmetrically laminated multimaterial junctions.
In: Composite Structures, 91 (4)
doi: 10.1016/j.compstruct.2009.04.027
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2009)
A semi-analytical discretization method for the near-field analysis of unsymmetrically laminated multimaterial junctions.
In: Composite Structures 91,
Artikel, Bibliographie

Mittelstedt, C. ; Beerhorst, M. (2008)
Closed-form buckling analysis of omega-stringer-stiffened composite panels considering periodic boundary conditions.
2nd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures. Braunschweig (3.-5.9.2008)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. (2008)
Explicit analysis and design equations for buckling loads and minimum stiffness requirements of orthotropic and isotropic plates under compressive load braced by centric and eccentric longitudinal stiffeners.
In: Thin-Walled Structures, 46
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2008)
Reddy’s Layerwise Laminate Plate Theory for the Computation of Elastic Fields in the Vicinity of Straight Free Laminate Edges.
In: Materials Science and Engineering – A 498.
Artikel, Bibliographie

Mittelstedt, C. (2008)
Stability analysis of stiffened composite plates under combined compression and shear and identification of minimum stiffener requirements.
In: International Journal of Engineering Science, 46
Artikel, Bibliographie

Mittelstedt, C. ; Schagerl, M. (2008)
The Windenburg-problem revisited: buckling and minimum stiffness requirements for composite plates with reinforced edges.
2nd International Conference on Buckling and Postbuckling Behaviour of Composite Laminated Shell Structures. Braunschweig (3.-5.9.2008)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2007)
The Pipes-Pagano-Problem revisited : elastic fields in boundary layers of plane laminated specimens under combined thermomechanical load.
In: Composite structures, 80
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2007)
A semi-analytical discretization method for the near-field analysis of two-dimensional multimaterial wedges under plane strain conditions.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. (2007)
Closed-form analysis of the buckling loads of symmetrically laminated orthotropic plates considering elastic edge constraints.
In: Composite Structures, (81)
Artikel, Bibliographie

Mittelstedt, C. (2007)
Closed-form analysis of the buckling loads of symmetrically laminated orthotropic plates considering elastic edge restraints.
In: Composite Structures, 81 (4)
doi: 10.1016/j.compstruct.2006.10.001
Artikel, Bibliographie

Mittelstedt, C. (2007)
Closed-form analysis of the buckling loads of uniaxially loaded blade-stringer-stiffened composite plates considering periodic boundary conditions.
In: Thin-Walled Structures, 45 (4)
doi: 10.1016/j.tws.2007.04.005
Artikel, Bibliographie

Mittelstedt, C. (2007)
Efficient buckling analysis of stiffened composite airframe parts.
1st CEAS European Air and Space Conference — Century Perspectives. Berlin (10.-13.9.2006)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. (2007)
Local buckling of wide-flange thin-walled anisotropic composite beams.
In: Archive of Applied Mechanics, 77 (7)
doi: 10.1007/s00419-006-0102-0
Artikel, Bibliographie

Mittelstedt, C. (2007)
Stability behaviour of arbitrarily laminated composite plates with free and elastically restrained unloaded edges.
In: International Journal of Mechanical Sciences, 49 (7)
doi: 10.1016/j.ijmecsci.2006.11.011
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2006)
Efficient Computation of order and mode of three-dimensional stress singularities in linear elasticity by the boundary finite element method.
In: International Journal of Solids and Structures, 43
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2006)
Fast and reliable analysis of free-edge stress fields in a thermally loaded composite strip by a lagerwise laminate theory.
In: International Journal for Numerical Methods in Engineering, 67
Artikel, Bibliographie

Mittelstedt, C. ; Becker, W. (2006)
Fast and reliable analysis of free-edge stress fields in a thermally loaded composite strip by a layerwise laminate theory.
In: International Journal for Numerical Methods in Engineering, (67)
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2005)
Asymptotic analysis of stress singularities in composite laminates by the boundary finite element method.
In: Composite Structures, 71
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2005)
Asymptotical analysis of free-edge and free-corner effects in laminate structures.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 5
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2005)
Semi-analytical computation of 3D stress singularities in linear elasticity.
In: Communications in Numerical Methods in Engineering, 21
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2005)
Thermoelastic fields in boundary layers of isotropic laminates.
In: Journal of Applied Mechanics, 72
Artikel, Bibliographie

Longeru, M. ; Mittelstedt, C. ; Becker, Wilfried (2005)
The boundary finite element method for the efficient computation of orders and modes of three-dimensional stress singularities.
In: PAMM : Proceedings in Applied Mathematics and Mechanics, 5
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2005)
The boundary finite element method for the identification of three-dimensinal stress singularities in linear fracture mechanics and laminate elasticity.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2005)
The boundary finite element method for the semi-analytical computation of 3d stress singularities in fracture mechanics.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2005)
A layerwise displacement formulation for the analysis of 3d boundary layer effects in laminated plates.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2005)
A variational model for boundary layer effects in cross-ply laminates based on a C-0-continuous layerwise displacement formulation.
In: Journal of Composite Materials, 39
Artikel, Bibliographie

Mittelstedt, C. ; Becker, W. (2005)
The boundary finite element method for the identification of three-dimensional stress singularities in linear fracture mechanics and laminate elasticity.
ICMSAO'05 — 1st International Conference on Modeling, Simulation and Applied Optimization. Sharjah (1.-3.2.2005)
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, W. (2005)
A layerwise displacement formulation for the analysis of three-dimensional boundary layer effects in laminated plates.
ICCST/5 — 5th International Conference on Composite Science and Technology. Sharjah (1.-3.2.2005)
Konferenzveröffentlichung, Bibliographie

Tapp, C. ; Hansel, W. ; Mittelstedt, C. ; Becker, W. (2004)
Weight-reduction of sandwich structures by an effective topology optimization technique.
In: PAMM — Proceedings in Applied Mathematics and Mechanics, 4
doi: 10.1002/pamm.200410294
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2004)
Interlaminar stress concentrations in layered structures: Part 1 : a selective literature survey on the free-edge effect since 1967.
In: Journal of Composite Materials, 38
Artikel, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2004)
Interlaminar stress concentrations in layered structures: Part 2 : closed-form analysis of stresses at laminated rectangular wedges with arbitrary non-orthotropic layup.
In: Journal of Composite Materials, 38
Artikel, Bibliographie

Longeru, M. ; Mittelstedt, C. ; Becker, Wilfried (2004)
Thermal analysis of free-corner effects in cross-ply plates by a higher-order theory approach.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2004)
Three-dimensional analytical and semi-analytical investigations of free-corner effects.
Konferenzveröffentlichung, Bibliographie

Tapp, C. ; Hansel, W. ; Mittelstedt, C. ; Becker, Wilfried (2004)
Weight-minimization of sandwich structures by a heuristic topology optimization algorithm.
In: Computer Methods in Engineering Science, 5
Artikel, Bibliographie

Tapp, C. ; Hansel, W. ; Mittelstedt, C. ; Becker, Wilfried (2004)
Weight-reduced of sandwich structures by an efficient topology optimization technique.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Lindemann, J. ; Becker, Wilfried (2004)
A boundary finite element method formulation for stress concentrations problems in composite laminates.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2004)
A hybrid variational model for the analysis of free-corner effects in layered plates.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2004)
A variational finite layer technique for the investigation for the investigation of thermally induced stress concentrations in composite structures.
In: Journal of Thermal Stress, 27
Artikel, Bibliographie

Mittelstedt, C. ; Hohe, Joerg ; Becker, Wilfried (2003)
Analysis of thermal stresses at free corners of layered plates.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2003)
Closed-form analysis of the free-corner effect in composite laminates.
Konferenzveröffentlichung, Bibliographie

Mittelstedt, C. ; Becker, Wilfried (2003)
Three-dimensional closed-form analysis of the stress field at rectangular corners of layered plates.
In: Archive of Applied Mechanics, 73
Artikel, Bibliographie

Mittelstedt, C. ; Becker, W.
Hrsg.: Focht, Gerhard ; Schiffner, Klaus (2002)
A refined analysis of the stress field at rectangular corners of composite laminates.
In: Festschriftband Univ.-Prof. Dr.-Ing. Klaus Schiffner zum 65. Geburtstag gewidmet
Buchkapitel, Bibliographie

Diese Liste wurde am Tue Mar 26 02:33:52 2024 CET generiert.