TU Darmstadt / ULB / TUbiblio

Items in division

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | Item Type | Language | No Grouping
Jump to: A | B | C | D | E | F | G | H | J | K | L | M | N | O | P | R | S | T | U | V | W | X | Y | Z
Number of items at this level (without sub-levels): 272.

A

Alexandrakis, Elena Ourania (2019):
Temperaturabhängigkeit von Befestigungen in Asphalt.
Darmstadt, Technische Universität,
[Ph.D. Thesis]

Alencar, D. ; Carvalho, D. B. F. ; Koenders, E. A. B. ; Mourão, F. ; Rocha, L. (2017):
Devising a computational model based on data mining techniques to predict concrete compressive strength.
108, In: Procedia Computer Science 108C (2017), pp. 455-464,
Elsevier, International Conference on Computational Science, ICCS 2017, Zurich Switzerland, 12.-14. June 2017, [Conference or Workshop Item]

Alexandrakis, E. ; Lieberum, Karl-Heinz ; Koenders, E. A. B. (2016):
Befestigungen in Asphalt.
In: 37th Int. Conference on Mechanics of Materials,
Sensbachtal, 37th Int. Conference on Mechanics of Materials, Sensbachtal, [Conference or Workshop Item]

Alexandrakis, E. (2015):
Befestigungen in Asphalt.
pp. 108-115, 36th Int. Conference on Mechanics of Materials, Sensbachtal, Germany, February 2015, [Conference or Workshop Item]

Alexandrakis, E. (2014):
Stoßartige Belastung an Befestigungen in Asphalt.
pp. 200-206, 35th Int. Conference on Mechanics of Materials, Faliraki, Greece, June 2014, [Conference or Workshop Item]

Aquino, R. G. ; Koleva, D. A. ; Breugel, K. van ; Koenders, E. A. B. (2013):
Characterization of Portland cement paste using MIP, nanoindentation and esem techniques.
Japan Concrete Institute, ICCS 13: 1st International Conference on Concrete Sustainability, Tokyo, Japan, 27-29 May 2013, [Conference or Workshop Item]

Alexandrakis, E. ; Lieberum, Karl-Heinz ; Niwinski, T. ; Gunkel, W. (2013):
Stoßartige Belastung an Befestigungen in Asphalt.
In: Annual journal on concrete and concrete structures, 28, pp. 1-2. ISSN 0931-1181,
[Article]

Alexandrakis, E. ; Reeb, S. ; Garrecht, H. (2013):
Feuchtemessung im Bauwesen mittels TDR.
In: Baustoff und Konstruktion, pp. 299-309, Springer-Verlag, [Book Section]

Alexandrakis, E. ; Heck, A. ; Renner, C. ; Reeb, S. ; Garrecht, H. (2012):
Energetische Sanierung und Überwachung am Beispiel eines historischen Strickbaus in Appenzell.
In: Annual journal on concrete and concrete structures, 27, pp. 27-28. ISSN 0931-1181,
[Article]

Alexandrakis, E. ; Reeb, S. ; Garrecht, H. (2012):
Monitoring and energetic refurbishment by the example of a historic Strickbau in Appenzell.
pp. 225-232, NILU-Norwegian Institute of Air Research, 2nd European workshop on Cultural heritage preservation, Oslo, Norway, 24-26 September 2012, [Conference or Workshop Item]

Alexandrakis, E. ; Garrecht, H. (2011):
Feuchtelasten im historischen Mauerwerk – Untersuchung mittels TDR.
In: Annual journal on concrete and concrete structures, 26, pp. 67-68. ISSN 0931-1181,
[Article]

B

Benedetto, M. F. ; Caggiano, A. ; Etse, G. (2018):
Virtual elements and zero thickness interface-based approach for fracture analysis of heterogeneous materials.
In: Computer Methods in Applied Mechanics and Engineering, (338), pp. 41-67. Elsevier, ISSN 00457825,
[Article]

Barros, J. A. O. ; Frazão, Carlos ; Caggiano, A. ; Folino, P. C. ; Martinelli, E. ; Xargay, H. ; Zamanzadeh, Z. ; Lourenço, L. (2017):
Cementitious Composites Reinforced with Recycled Fibres.
In: Recent Advances on Green Concrete for Structural Purposes, pp. 104-195, Basel, Springer, ISBN 978-3-319-56795-2,
DOI: 10.1007/978-3-319-56797-6_8,
[Book Section]

Bacarji, E. ; Toledo Filho, R. D. ; Koenders, E. A. B. ; Figueiredo, E. P. ; Lopes, J. L. M. P. (2013):
Sustainability perspective of marble and granite residues as concrete fillers.
In: Construction and Building Materials, 45, pp. 1-10. ISSN 09500618,
[Article]

Beck, M. ; Gilka-Bötzow, A. (2013):
Energieeffizienzforschung in der ETA-Fabrik.
Darmstadt, Darmstadt, [Conference or Workshop Item]

Borgnakke, C. ; Hansen, W. ; Kang, Y. ; Liu, Z. ; Koenders, E. A. B. (2012):
Cryogenic suction pump mechanism for combined salt-and frost exposure.
In: Second International Conference on Microstructural-related Durability of Cementitious Composites, RILEM Proceedings pro083, 11-13 April, 2012, Amsterdam, The Netherlands,
RILEM Publications, ISBN 978-2-35158-129-2,
[Conference or Workshop Item]

C

Caggiano, Antonio ; Pepe, Marco ; Xargay, Hernan ; Martinelli, Enzo (2021):
Analytical Modeling of the Postcracking Response Observed in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete. (Publisher's Version)
In: Polymers, 12 (9), MDPI, ISSN 2073-4360,
DOI: 10.26083/tuprints-00018640,
[Article]

Caggiano, A. ; Schicchi, D. S. ; Mankel, C. ; Ukrainczyk, N. ; Koenders, E. A. B. (2018):
A mesoscale approach for modeling capillary water absorption and transport phenomena in cementitious materials.
In: Computers & Structures, 200, pp. 1-10. Elsevier, ISSN 0045-7949,
DOI: 10.1016/j.compstruc.2018.01.013,
[Article]

Caggiano, A. ; Schicchi, D. S. ; Etse, G. ; Ripani, M. (2018):
Meso-scale response of concrete under high temperature based on coupled thermo-mechanical and pore-pressure interface modeling.
In: Engineering Failure Analysis, (85), pp. 167-188. Elsevier, ISSN 1350-6307,
[Article]

Caggiano, A. ; Martinelli, E. ; Schicchi, D. S. ; Etse, G. (2018):
A modified Duvaut-Lions zero-thickness interface model for simulating the rate-dependent bond behavior of FRP-concrete joints.
In: Composites Part B: Engineering, (149), pp. 260-267. ISSN 1359-8368,
[Article]

Caggiano, A. ; Mankel, C. ; Koenders, E. A. B. (2018):
Reviewing theoretical and numerical models for PCM-embedded cementitious composites.
In: MDPI Buildings, 9 (1), MDPI, DOI: 10.3390/buildings9010003,
[Article]

Caggiano, A. ; Barros, J. A. O. ; Etse, G. (2017):
Advanced Numerical Models for the Analysis of Sustainable FRC Structures.
In: Recent Advances on Green Concrete for Structural Purposes, pp. 363-401, Springer, ISBN 978-3-319-56795-2,
DOI: 10.1007/978-3-319-56797-6_12,
[Book Section]

Caggiano, A. ; Etse, G. ; Folino, P. C. ; Ripani, M. ; Vrech, S. (2017):
Constitutive Formulations for Concrete with Recycled Aggregates.
In: Recent Advances on Green Concrete for Structural Purposes, pp. 109-122, Basel, Springer, ISBN 978-3-319-56795-2,
DOI: 10.1007/978-3-319-56797-6_5,
[Book Section]

Caggiano, A. ; Pepe, M. ; Lima, C. ; Folino, P. C. ; Martinelli, E. (2017):
Experimental Characterization of the Post-Cracking Response in Hybrid Recycled/Industrial Steel Fiber-Reinforced Concrete.
Chennai, India, Advances in Construction Materials Systems, [Conference or Workshop Item]

Caggiano, A. ; Etse, G. ; Ferrara, L. ; Krelani, V. (2017):
Zero-thickness interface constitutive theory for concrete self-healing effects.
In: Computers & Structures, (186), pp. 22-34. Elsevier, ISSN 0045-7949, 0366-7138,
[Article]

Caggiano, A. ; Folino, P. C. ; Lima, C. ; Martinelli, E. ; Pepe, M. (2017):
On the mechanical response of Hybrid Fiber Reinforced Concrete with Recycled and Industrial Steel Fibers.
In: Construction and Building Materials, (147), pp. 286-295. Amsterdam : Elsevier Science, ISSN 0950-0618,
[Article]

Caggiano, A. ; Gambarelli, S. ; Martinelli, E. ; Nisticò, N. ; Pepe, M. (2016):
Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete.
In: Construction and Building Materials, 125, pp. 1035-1043. Elsevier, [Article]

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2016):
Fracture-based interface model for FRP NSM systems in concrete.
In: Composite structures : an international journal, 152, pp. 816-828. ISSN 0263-8223,
[Article]

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2016):
Lei constitutiva para a simulacão da ligacão de sistemas NSM FRP no betão.
pp. 1-10, Encontro Nacional BETÃO ESTRUTURAL, DEC - Universidade de Coimbra, 2 a 4 de novembro de 2016, [Conference or Workshop Item]

Caggiano, A. ; Schicchi, D. S. ; Etse, G. ; Martinelli, E. (2016):
Meso-Scale Modeling of Hybrid Industrial/Recycled Steel Fiber-Reinforced Concrete.
In: Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016) ISBN: 978-618-82844-0-1, pp. 2353-2362,
ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece, 5–10 June 2016, [Conference or Workshop Item]

Caggiano, A. ; Schicchi, D. S. ; Martinelli, E. ; Etse, G. (2016):
Meso-scale simulation of the post-cracking behaviour of hybrid industrial/recycled steel fibre-reinforced concrete.
In: ISBN:978-88-98720-14-9, pp. 401-410,
4th Workshop on New Boundaries of Structural Concrete, Capri Island - Italy, September 29-October 1 2016, [Conference or Workshop Item]

Caggiano, A. ; Xargay, H. ; Galladini, D. ; Vistos, L. ; Folino, P. C. ; Martinelli, E. (2016):
Hormigon reforzado con fibras de acero industriales y recicladas: analisis experimental del comportamiento mecanico.
In: ISBN: 978-987-23292-3-5, pp. 1-10,
24º Jornadas Argentinas de Ingeniería Estructural, Buenos Aires, 28.-30. September 2016, [Conference or Workshop Item]

Caggiano, A. ; Xargay, H. ; Folino, P. C. ; Martinelli, E. (2015):
Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices.
In: Cement and Concrete Composites, 62, pp. 146-155. Barking, Essex : Elsevier, ISSN 0958-9465,
[Article]

Caggiano, A. ; Etse, G. (2015):
Coupled thermo-mechanical interface model for concrete failure analysis under high temperature.
In: Computer methods in applied mechanics and engineering, 289, pp. 498-516. Elsevier, ISSN 0045-7825,
[Article]

Caggiano, A. ; Schicchi, D. S. (2015):
A thermo-mechanical interface model for simulating the bond behaviour of FRP strips glued to concrete substrates exposed to elevated temperature.
In: Engineering Structures, 83, pp. 243-251. Elsevier, ISSN 0141-0296,
[Article]

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2015):
A comparison between interface constitutive models: Total approach versus plasticity approach.
The 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015) Joint Conference, Nanjing, China, 14.-16. Dezember 2015, [Conference or Workshop Item]

Caggiano, A. ; Krelani, V. ; Ferrara, L. ; Etse, G. (2015):
Zero-Thickness Interface Formulation For Fracture Analysis Of Self-Healing Concrete.
In: ISBN: 978-84-943928-2-5, pp. 553-564,
1st Pan-American Congress on Computational Mechanics - PANACM 2015 - MECOM 2015, Buenos Aires, Argentina, 27.-29. April 2015, [Conference or Workshop Item]

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2015):
Comparação entre modelos constitutivos de interface: abordagem total versus abordagem com plasticidade,.
In: ISBN 978-989-8793-02-7, pp. 16-22,
Universidade do Minho, SPREB-FRP 2015 Proceedings, UM Guimarães, 2015, [Conference or Workshop Item]

Caggiano, A. ; Martinelli, E. (2013):
A fracture-based interface model for simulating the bond behaviour of FRP strips glued to a brittle substrate.
In: Composite structures : an international journal, 99, pp. 397-403. ISSN 0263-8223,
[Article]

Caggiano, A. ; Martinelli, E. (2013):
Fracture-based interface formulation for FRP-to-concrete debonding mechanisms in mixed cracking mode.
pp. 1-10, FRPRCS11 Congress, Guimaraes, Portugal, 26.-28. June 2013, [Conference or Workshop Item]

Caggiano, A. ; Cremona, M. ; Faella, C. ; Lima, C. ; Martinelli, E. (2012):
Fracture behavior of concrete beams reinforced with mixed long/short steel fibers.
In: Construction and Building Materials, 37, pp. 832-840. Amsterdam : Elsevier Science, ISSN 0950-0618,
[Article]

Caggiano, A. ; Martinelli, E. (2012):
A unified formulation for simulating the bond behaviour of fibres in cementitious materials.
In: Materials & Design, 42, pp. 204-213. Elsevier, ISSN 0264-1275, 0261-3069,
[Article]

Caggiano, A. ; Pepe, M. ; Koenders, E. A. B. ; Martinelli, E. ; Etse, G. (2012):
Numerical modeling of hydration process and temperature evolution in early age concrete.
pp. 1893-1907, Asociación Argentina de Mecánica Computacional, Mecom 2012 - X Congreso Argentino de Mecánica Computacional, Salta, Argentina, 13.-16. November 2012, [Conference or Workshop Item]

Caggiano, A. ; Martinelli, E. ; Faella, C. (2012):
A fully-analytical approach for modelling the response of FRP plates bonded to a brittle substrate.
In: International Journal of Solids and Structures, 49 (17), pp. 2291-2300. Elsevier, ISSN 0020-7683,
[Article]

Caggiano, A. ; Etse, G. ; Martinelli, E. (2012):
Zero-thickness interface model formulation for failure behavior of fiber-reinforced cementitious composites.
In: Computers & Structures, 98-99 (5), pp. 23-32. Elsevier, ISSN 0045-7949, 0366-7138,
[Article]

Caggiano, A. ; Martinelli, E. ; Faella, C. (2012):
A zero-thickness interface model for simulating the bond behaviour of FRP-strips glued on concrete.
CICE, CICE 2012, Rome, Italy, 13. -15. June 2012, [Conference or Workshop Item]

Caggiano, A. ; Cremona, M. ; Faella, C. ; Lima, C. ; Martinelli, E. (2012):
Post-cracking characterisation of concrete beams reinforced with mixed long/short steel fibers.
In: ISBN: 9788890707834, pp. 947-954,
Bond in Concrete 2012, Brescia, Italy, 17. - 20. June 2012, [Conference or Workshop Item]

Caggiano, A. ; Martinelli, E. (2012):
Fracture-based model for mixed mode cracking of FRP strips glued on concrete.
In: ISBN: 9788890707834, pp. 1055-1062,
Bond in Concrete 2012, Brescia, Italy, 17. - 20. June 2012, [Conference or Workshop Item]

Caggiano, A. ; Faella, C. ; Lima, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. ; Mele, M. ; Pasqualini, A. ; Valente, M. (2012):
Sul comportamento meccanico di calcestruzzi con aggregati riciclati e ceneri volanti.
19, In: ISBN: 9788890364792, pp. 272-384,
19th CTE 2012, [Conference or Workshop Item]

Caggiano, A. ; Vrech, S. ; Etse, G. ; Martinelli, E. (2012):
Elasto-plastic microplane model for fiber reinforced cementitious composites.
Mecom 2012 - X Congreso Argentino de Mecánica Computacional, Salta, Argentina, 13.-16. November 2012, [Conference or Workshop Item]

Caggiano, A. ; Etse, G. ; Martinelli, E. (2011):
Interface model for fracture behaviour of fiber-reinforced cementitious composites (FRCCs) Theoretical formulation and applications.
In: European journal of environmental and civil engineering, 15 (9), pp. 1339-1359. Taylor & Francis, ISSN 1964-8189; 2116-7214,
[Article]

Caggiano, A. ; Etse, G. ; Vrech, S. (2011):
Meso- and macroscopic models to simulate the mechanical behavior of fiber reinforced concrete members.
30, In: ISSN: 1666-6070, pp. 1779-1788,
ENIEF 2011, Mecanica Computacional, Rosario, Argentina, 2. - 6. November 2011, [Conference or Workshop Item]

Caggiano, A. ; Martinelli, E. ; Etse, G. (2011):
Bond behavior of FRP strips glued on concrete: a novel zero-thickness interface model.
30, In: ISSN:1666-6070, pp. 597-609,
ENIEF 2011, Mecanica Computacional, Rosario, Argentina, 2. - 6. November 2011, [Conference or Workshop Item]

Caggiano, A. ; Etse, G. ; Martinelli, E. (2011):
A novel meso-scopic model for simulating the mechanical behaviour of Fiber Reinforced Concrete Composites (FRCCs).
In: ISBN 9788890429224, pp. 301-308,
The New Boundaries of Structural Concrete, 2011, Ancona, Italy, 15. - 16. September 2011, [Conference or Workshop Item]

Caggiano, A. ; Lima, C. ; Faella, C. ; Martinelli, E. ; Mele, M. ; Pasqualini, A. ; Realfonzo, R. ; Valente, M. (2011):
Mechanical Behaviour of Concrete with Recycled Aggregate.
In: ISBN: 9788890429224, pp. 55-62,
The New Boundaries of Structural Concrete, 2011, Ancona, Italy, 15. - 16. September 2011, [Conference or Workshop Item]

D

Drugă, Bogdan ; Ukrainczyk, Neven ; Weise, Kira ; Koenders, Eddie ; Lackner, Susanne (2018):
Interaction between wastewater microorganisms and geopolymer or cementitious materials: Biofilm characterization and deterioration characteristics of mortars.
In: International Biodeterioration & Biodegradation, 134, pp. 58-67. Elsevier, ISSN 0964-8305,
DOI: 10.1016/j.ibiod.2018.08.005,
[Article]

Drugă, Bogdan ; Ukrainczyk, N. ; Weise, Kira ; Koenders, E. A. B. ; Lackner, Susanne (2018):
Interaction between wastewater microorganisms and geopolymer or cementitious materials: Biofilm characterization and deterioration characteristics of mortars.
In: International Biodeterioration & Biodegradation, 134, pp. 58-67. Elsevier, ISSN 0964-8305,
DOI: 10.1016/j.ibiod.2018.08.005,
[Article]

Drugă, Bogdan ; Weise, K. ; Ukrainczyk, N. ; Muthu, M. ; Lackner, Susanne ; Koenders, E. A. B.
Bertron, A. ; Jonkers, H. (eds.) (2018):
Interaction of Wastewater Microorganisms with Geopolymers and Cementitious Materials.
In: Microorganisms-Cementitious Materials Interactions, pp. 163-172,
Toulouse, Frankreich, Final Conf. of RILEM TC 253-MCI: Microorganisms-Cementitious Materials Interactions, Toulouse, 25.-26.06.2018, ISBN 978-2-35158-207-7,
[Conference or Workshop Item]

Dado, E. ; Koenders, E. A. B. ; Carvalho, D. B. F. (2012):
Netcentric Virtual Laboratories for Composite Materials.
In: Composites and Their Properties, Intech, ISBN 9789535107,
[Book Section]

E

Etse, G. ; Caggiano, A. (2017):
Degradation of Concrete Mechanical Behavior due to Temperature Effects.
Calgary, Canada, IEEE-IAS/PCA Cement Industry, Technical Conference. IEEE Industry Applications Society., 21.05.2017 - 25.05.2017, DOI: 10.1109/CITCON.2017.7951845,
[Conference or Workshop Item]

Etse, G. ; Schicchi, D. S. ; Caggiano, A. ; Ripani, M. (2016):
Discontinuos Approach for Meso-Scale Modeling of Porous Materials like Concrete under High Temperature.
9th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Berkeley, California USA, 29.05-01.06.2016, [Conference or Workshop Item]

Etse, G. ; Ripani, M. ; Caggiano, A. ; Schicchi, D. S. (2015):
Strength and durability of concrete subjected to high temperature: continuous and discrete constitutive approaches.
In: ACI Special Publication, 305, pp. 9.1-9.18. American Concrete Institute, ISSN 0193-2527,
[Article]

Etse, G. ; Caggiano, A. ; Vrech, S. (2012):
Multiscale failure analysis of fiber reinforced concrete based on a discrete crack model.
In: International Journal of Fracture, 178 (1-2), pp. 131-146. ISSN 0376-9429,
[Article]

Etse, G. ; Caggiano, A. ; Vrech, S. (2012):
Constitutive microplane and interface laws for multiscale analysis of steel fiber reinforced concrete.
pp. 7459-7477, ECCOMAS 2012, Vienna, Austria, 10. - 14. September 2012, [Conference or Workshop Item]

F

Ferrara, L. ; Caggiano, A. ; Luzio, G. ; Etse, G. ; Gettu, R. ; Krelani, V. ; Rocha Ferreira, S. ; Roig Flores, M. ; Serna, P. ; Toledo Filho, R. D. (2016):
Five Years of International Collaborative Research on Self-Healing Capacity of Cementitious Composites.
fib Symposium 2016 - the International Federation for Structural Engineering, Cape Town, South Africa, 21-23 November 2016, [Conference or Workshop Item]

Ferrara, L. ; Caggiano, A. ; Krelani, V. ; Etse, G. (2014):
Self-Healing Capacity of Cementitious Composites: Experiments and Modeling.
In: ISSN:1666-6070, pp. 1323-1338,
Proceedings of the MECOM 2014, Mecánica Computacional Vol XXXIII, [Conference or Workshop Item]

Folino, P. C. ; Caggiano, A. ; Martinelli, E. ; Xargay, H. ; Vega, V. (2014):
Hormaigón Con Agregados Reciclados Para Ser Utilizado Como Hormigón Estructural.
In: ISBN: 978-987-23292-2-8,
23 Jornadas Argentinas de Ingeniería Estructural, Buenos Aires, Argentina, 17.-19. September 2015, [Conference or Workshop Item]

Franković Mihelj, N. ; Šipušić, J. ; Ukrainczyk, N. (2013):
Kinetic study of calcium sulfoaluminate cement hydration.
MATRIB 2013 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 27-29 June 2013, [Conference or Workshop Item]

Faella, C. ; Caggiano, A. ; Lima, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. (2013):
The influence of the initial moisture conditions of coarse aggregates on the properties of RAC.
In: ISBN: 9788890429279, pp. 211-220,
3rd Workshop on "The New Boundaries of Structural Concrete", Bergamo, Italy, 3.- 4. October 2013, [Conference or Workshop Item]

G

Grengg, C. ; Mittermayr, F. ; Ukrainczyk, N. ; Koenders, E. A. B. ; Günther, K. ; Dietzel, Mathias
Bertron, A. ; Jonkers, H. (eds.) (2018):
Microbial Induced Acid Corrosion from a Field Perspective - Advances in Process Understanding and Construction Material Development.
In: Microorganisms-Cementitious Materials Interactions, pp. 3-10,
Toulouse, Frankreich, Final Conf. of RILEM TC 253-MCI: Microorganisms-Cementitious Materials Interactions, Toulouse, 25.-26.06.2018, ISBN 978-2-35158-207-7,
[Conference or Workshop Item]

Grengg, C. ; Mittermayr, F. ; Ukrainczyk, N. ; Koenders, E. A. B. ; Koraimann, G. ; Kienesberger, S. ; Dietzel, Mathias (2018):
Microbial induced acid corrosion from a field perspective - Advances in process understanding and construction material development.
In: MATEC Web Conferences, pp. 1-6,
Cape Town, South Africa, 5th International Conference on Concrete Repair, Rehabilitation, and Retrofitting (ICCRRR 2018), Cape Town, South Africa, 19-21. November 2018, DOI: 10.1051/matecconf/201819902002,
[Conference or Workshop Item]

Grengg, C. ; Mittermayr, F. ; Ukrainczyk, N. ; Koraimann, G. ; Kienesberger, S. ; Dietzel, Mathias (2018):
Advances in concrete based construction materials for sewer systems affected by microbial induced concrete corrosion: A review.
In: Water Research, (134), pp. 341-352. ISSN 0043-1354,
[Article]

Gilka-Bötzow, A.
Koenders, E. A. B. (ed.) (2016):
Stabilität von ultraleichten Schaumbetonen - Betrachtung instationärer Porenstrukturen.
In: Werkstoffe im Bauwesen | Construction and Building Materials, 1, Wiesbaden, Springer Vieweg, ISBN 978-3-658-16595-6,
[Book]

Gilka-Bötzow, A. ; Ukrainczyk, N. ; Koenders, E. A. B. (2016):
Modelling Mineral Foam Morphology Dynamics for Stability and Insulation Properties.
In: Proceedings of 4th Workshop on The New Boundaries of Structural Concrete, pp. 389-400,
Capri, The New Boundaries of Structural Concrete 2016, Villa Orlandi, Capri Island - Italy, September 29 - October 1 2016, [Conference or Workshop Item]

Gilka-Bötzow, A. ; Zimmer, M. ; Koenders, E. A. B. (2016):
Material Properties of mineralized foam and its density dependency - a meta-study.
pp. 12284-1295, Int. Conf. on Concrete Sustainability (ICCS16), Madrid, Spain, 13-15 Juni 2016, [Conference or Workshop Item]

Gilka-Bötzow, Albrecht (2016):
Betrachtung instationärer zementöser Schaumstrukturen.
Darmstadt, Eigenverlag, TU Darmstadt,
[Ph.D. Thesis]

Galladini, D. ; Vistos, L. ; Caggiano, A. ; Etse, G. (2016):
Hormigon reforzado con fibras de acero industriales y recicladas: reglas de diseño para uso estructural.
In: ISBN: 978-987-23299-3-5, pp. 1-12,
24º Jornadas Argentinas de Ingeniería Estructural, Buenos Aires, 28.-30. September 2016, [Conference or Workshop Item]

Gilka-Bötzow, A. ; Röser, F. ; Koenders, E. A. B. (2015):
Mineral Foam in Energy Active Buildings.
Nagasaki, Japan, International Conference on the Regeneration and Conservation of Concrete Structures, Nagasaki, Japan, 01.05.2015, [Conference or Workshop Item]

Gilka-Bötzow, A. ; Koenders, E. A. B. (2015):
Rheological behavior of the continuous phase of foams and its effect on the dispersed phase.
Regensburg, 24. Workshop und Kolloquium Rheologische Messungen an Baustoffen, Regensburg, 11. und 12. März 2015, [Conference or Workshop Item]

Gilka-Bötzow, A. (2014):
A new approach to the production of mineralized foam.
In: Darmstadt concrete : annual journal on concrete and concrete structures, 29, pp. 11-12. Technische Universität Darmstadt, ISSN 0931-1181,
[Article]

Gaitero, J. J. ; Dolado, J. S. ; Neuen, C. ; Heber, F. ; Koenders, E. A. B. (2014):
Computacional en 3D del lixiviado de calcio en matrices de cemento.
In: Materiales de Construcción, 64 (316), pp. e035. ISSN 1988-3226, 0465-2746,
[Article]

Gaitero, J. J. ; Dolado, J. S. ; Neuen, C. ; Heber, F. ; Koenders, E. A. B. (2014):
3D computational simulation of calcium leaching in cement matrices.
In: Materiales de Construcción, 64 (316), ISSN 1988-3226, 0465-2746,
[Article]

Garrecht, H. ; Gilka-Bötzow, A. (2013):
Mineralized foamed concrete acting compositely with thermally activated UHPC shells.
In: BFT International, pp. 118-120. ISSN 0373-4331,
[Article]

Gaitero, J. J. ; Dolado, J. S. ; Neuen, C. ; Heber, F. ; Koenders, E. A. B. (2012):
Computational 3D simulation of calcium leaching in cement matrices.
RILEM Publications SARL, Second International Conference on Microstructural-related Durability of Cementitious Composites, RILEM, Amsterdam, The Netherlands, 11-13 April 2012, ISBN 9782351581,
[Conference or Workshop Item]

Gilka-Bötzow, A.
Müller, H. S. ; Haist, M. ; Acosta, F. (eds.) (2012):
Influence of the microstructure of low density mineralized foams on their thermal conductivity.
pp. 419-423, Karlsruhe, KIT Scientific Publishing, Proceedings of the 9th fib International PhD Symposium in Civil Engineering : Karlsruhe Institute of Technology (KIT), Karlsruhe, ISBN 978-3-86644-858-2,
[Conference or Workshop Item]

Gilka-Bötzow, A. ; Garrecht, H. (2011):
Haufwerksporige Leichtbetone (LAC 2) mit minimierter Rohdichte - Gefügeoptimierung mit schaummodifizierten Zementleimen.
In: BFT International, pp. 116-119. ISSN 0373-4331,
[Article]

Gilka-Bötzow, A.
Breit, W. ; Kurz, W. ; Schnell, C. (eds.) (2010):
Mineralisierter Schaum.
2, pp. 709-720, Kaiserlautern, Beiträge zum 51. DAfStb Forschungskolloquium, Kaiserlautern, [Conference or Workshop Item]

Gilka-Bötzow, A. ; Heiduschke, A. ; Haller, P. (2010):
Zur Abbrandrate von Holz in Abhängigkeit der Rohdichte.
In: European Journal of Wood and Wood Products, 69 (1), pp. 159-162. ISSN 0018-3768,
[Article]

Gilka-Bötzow, A. ; Garrecht, H. (2010):
Wandfertigteile aus Leichtbeton - Ist die massive Bauweise mit der EnEV 2009 noch möglich?
In: BFT International, pp. 112-115. ISSN 0373-4331,
[Article]

H

Harenberg, S. ; Caggiano, A. ; Koenig, A. ; Said, D. ; Gilka-Bötzow, A. ; Schultz-Cornelius, M. ; Yang, S. ; Pahn, M. ; Dehn, F. ; Koenders, E. A. B. (2018):
Micromechanical behavior of UHPC under cyclic bending-tensile loading in consideration of the influence of the concrete edge zone.
Wien, 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), München, 19.-23.03.2018, [Conference or Workshop Item]

Herrling, Maria Pia ; Ukrainczyk, N. ; Lackner, Susanne ; Nägler, J. ; Koenders, E. A. B.
Bertron, A. ; Jonkers, H. (eds.) (2018):
Bioreceptivity of geopolymers in wastewater: preliminary comparison with conventional mortars.
In: Microorganisms-Cementitious Materials Interactions, pp. 173-181,
Toulouse, Frankreich, Final Conf. of RILEM TC 253-MCI: Microorganisms-Cementitious Materials Interactions, Toulouse, 25.-26.06.2018, ISBN 978-2-35158-207-7,
[Conference or Workshop Item]

Herget, C. A. ; Vogt, O. ; Zimmermann, A. ; Ukrainczyk, N. ; Koenders, E. A. B. (2017):
Design of Geopolymers with Reduced Content of Metakaolin and Silicate Solution.
Vol. 3, In: Design of Geopolymers with Reduced Content of Metakaolin and Silicate Solution, pp. 209-218,
71st RILEM Annual Week & ICACMS 2017, Chennai, India, 03.-08. September 2017, [Conference or Workshop Item]

Hoornahad, H. ; Koenders, E. A. B. ; Breugel, K. van (2015):
Wettability of particles and its effect on liquid bridges in wet granular materials.
In: Journal of Silicate Based and Composite Materials, 67 (4), pp. 143-146. ISSN 0013-970X,
[Article]

Hoornahad, H. ; Koenders, E. A. B. (2014):
A performance -based method for granular based method for granular -paste mix design.
Universidade do Minho, 9th international masonry conference, Guimarães, Portugal, 2014, [Conference or Workshop Item]

Hoornahad, H. ; Koenders, E. A. B. (2014):
Simulating macroscopic behavior of self-compacting mixtures with DEM.
In: Cement and Concrete Composites, 54, pp. 80-88. Barking, Essex : Elsevier, ISSN 0958-9465,
[Article]

Huyeng, Tim-Jonathan (2014):
Untersuchung der Temperatur und Feuchteverteilung in der Luft des Passivhaus Hallenbades „Bambados“ zur Beurteilung der Verdunstungsmengen des Beckenwassers.
TU Darmstadt, [Bachelor Thesis]

Hansen, W. ; Liu, Z. ; Koenders, E. A. B. (2014):
Viscoelastic stress modeling in cementitious materials using constant viscoelastic hydration modulus.
DCMat Ageing Centre, Delft University of Technology, 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Conference or Workshop Item]

Hoornahad, H. ; Koenders, E. A. B. (2013):
Effect of the mix composition on rheological behavior of a fresh granular-cement paste material.
In: 7th RILEM International Conference on Self-Compacting Concrete and 1st RILEM International Conference on Rheology and Processing of Construction Materials, Paris (France) 2-4 Sept., 2013,
RILEM, 7th RILEM International Conference on Self-Compacting Concrete and 1st RILEM International Conference on Rheology and Processing of Construction Materials, Paris, France, 2-4 Sept., 2013, ISBN 978-2-35158-137-7,
[Conference or Workshop Item]

Hoornahad, H. ; Koenders, E. A. B. (2013):
Simulation of macroscopic behavior of a self-compacting mixture based on DEM.
Iowa State University, SCC 5th North American Conference on the Design and Use of Self-Consolidating Concrete, Chicago, USA, May 12-15, 2013, [Conference or Workshop Item]

Ham, H. W. M. van der (2011):
Microstructure and transport phenomena in visco-elastic modelling of hardening cementitious materials.
Technische Universität Delft, ISBN 978-94-6108-132-2,
[Ph.D. Thesis]

J

Jefferson, Tony ; Javierre, Etelvina ; Freeman, Brubeck ; Zaoui, Ali ; Koenders, E. A. B. ; Ferrara, Liberato (2018):
Research Progress on Numerical Models for Self-Healing Cementitious Materials.
In: Advanced Materials Interfaces, In: Advanced Materials Interfaces, 5 (17), Wiley-VCH Verlag GmbH & Co. KGaA, ISSN 2196-7350,
DOI: 10.1002/admi.201701378,
[Article]

Jefferson, Tony ; Javierre, Etelvina ; Freeman, Brubeck ; Zaoui, Ali ; Koenders, E. A. B. ; Ferrara, L. (2018):
Research Progress on Numerical Models for Self-Healing Cementitious Materials.
In: Advanced Materials Interfaces, 5 (17), pp. 1701378 (5-19). ISSN 2196-7350,
DOI: 10.1002/admi.201701378,
[Article]

K

Kreplin, Frederic ; Schabel, Samuel ; Lehmann, Martin ; Büter, Andreas ; Thomas, Mandy ; Arndt, Tiemo ; Mehlhase, Sabrina ; Biesalski, Markus ; Mittelstedt, Christian ; Maier, Andreas ; Kiziltoprak, Nihat ; Schneider, Jens ; Gilka-Bötzow, Albrecht ; Nazari Sam, Mona ; Koenders, E. A. B.
Schabel, Samuel (ed.) (2020):
KOMPAP - Energieeffizientes Bauen durch Komposit-Materialien mit Papier.
Darmstadt, Technische Universität Darmstadt, BMWi 03ET1414A-C + E, [Report]

Koenders, E. A. B. ; Ukrainczyk, N. ; Caggiano, A. ; Gilka-Bötzow, A.
Lange, Jörg ; Rädel, F. (eds.) (2018):
Werkstoffinnovationen im Bauwesen.
2018, In: Festschrift Jörg Lange, pp. 177-183, Darmstadt, Universitäts- und Landesbibliothek Darmstadt, [Book Section]

Knaack, Ulrich ; Koenders, E. A. B.
Knaack, Ulrich ; Koenders, E. A. B. (eds.) (2018):
Bauphysik der Fassade.
Darmstadt, Birkhäuser, [Book]

Koenders, E. A. B. ; Gilka-Bötzow, A. ; Caggiano, A. ; Ukrainczyk, N.
Pahn, Matthias ; Thiele, Catherina ; Glock, Christian (eds.) (2018):
Energy Efficiency as a Driver for Materials Innovations.
In: Vielfalt im Massivbau – Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell, pp. 527-541, Berlin, Ernst & Sohn, ISBN 978-3-00-058653-8,
[Book Section]

Koenders, E. A. B. ; Gilka-Bötzow, A. ; Caggiano, A. ; Ukrainczyk, N. (2018):
Energy Efficiency as a driver for materials innovations.
In: VIELFALT IM MASSIVBAU, Festschrift zum 65. Geburstag von Prof. Dr.-Ing. Jürgen Schnell, pp. 789-805, Berlin, Ernst & Sohn - A Wiley Brand, ISBN 978-3-00-058653-8,
[Book Section]

Koenders, E. A. B. (2018):
Frome Early Age Relaxation to Microstructure Formation.
pp. 21-29, Delft, Netherlands, RILEM Proceedings (Pro 127) of the Symposium on Concrete Modelling - CONMOD2018, [Conference or Workshop Item]

Koenders, E. A. B. ; Röser, F. (2018):
Zu einem versuchsbasierten Hydratationsmodell.
Weimar, Deutschland, 20. IBAUSIL, Weimar, 12.-14.09.2018, [Conference or Workshop Item]

Koenders, E. A. B. ; Ukrainczyk, N. ; Caggiano, A. (2018):
Modelling the Self-Healing Portential of Dissoluble Encapsulated Cement.
Glasgow, Schottland, 6th European Conference on Computational Mechanics (ECCM 6), 7th Conference on Computational Fluid Dynamics (EFCD 7), Glasgow, UK, 11.-15.06.2018, [Conference or Workshop Item]

Koenders, E. A. B. ; Ukrainczyk, N. ; Caggiano, A. (2018):
Modelling the Self-Healing potential of dissoluble encapsulated cement.
In: Proc. of the 6th European Conference on Computational Mechanics (ECCM 6) and the 7th European Conference on Computational Fluid Dynamics (ECFD 7), pp. 3169-3180,
Glasgow, Schottland, 6th European Conference on Computational Mechanics (ECCM 6) and the 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11.06 - 15.06.2018, [Conference or Workshop Item]

Koenders, E. A. B. (2018):
Modelling of chloride ingress in concrete based on benchmarking field results.
199,, In: MATEC Web Conferences, pp. 1-7,
Cape Town, South Africa, 5th International Conference on Concrete Repair, Rehabilitation, and Retrofitting (ICCRRR 2018), Cape Town, South Africa, 19-21. November 2018, DOI: 10.1051/matecconf/201819901005,
[Conference or Workshop Item]

Koenders, E. A. B. ; Martinelli, E. ; Pepe, M. ; Toledo Filho, R. D. (2017):
Generalised mix design rules for concrete with recycled aggregates.
In: Recent Advances on Green Concrete for Structural Purposes, pp. 123-134, Basel, Springer, ISBN 978-3-319-56795-2,
DOI: 10.1007/978-3-319-56797-6_6,
[Book Section]

Koenders, E. A. B. ; Hansen, W. ; Ukrainczyk, N. ; Toledo Filho, R. D. (2014):
Modeling pore continuity and durability of cementitious sealing material.
In: Journal of Energy Resources Technology, 136 (4), New York, NY : ASME, ISSN 0195-0738,
[Article]

Koenders, E. A. B. ; Pepe, M. ; Martinelli, E. (2014):
Compressive strength and hydration processes of concrete with recycled aggregates.
In: Cement and Concrete Research, 56, pp. 203-212. ISSN 0008-8846,
[Article]

Kazmina, O. V. ; Dushkina, M. A. ; Volland, S. (2014):
Low temperature synthesis of composition poros materials from mortar sands.
In: IOP Conference Series: Materials Science and Engineering, 64, pp. 80-83. Institute of Physics Publishing (IOP), ISSN 1757-8981, e-ISSN 1757-899X,
DOI: 10.1088/1757-899X/64/1/012015,
[Article]

Kazmina, O. V. ; Dushkina, M. A. ; Vereshchagin, V. ; Volland, S. (2014):
Use of dispersive screenings of mortar sands for obtaining foam glass-crystal materials.
In: Stroitel'nye materialy, 2014 (1-2), pp. 93-97. ISSN 0585-430X,
[Article]

Koenders, E. A. B. ; Pepe, M. ; Caggiano, A. ; Martinelli, E. ; Toledo Filho, R. D. (2013):
A compressive strength model for recycled aggregate systems.
pp. 594-599, Japan Concrete Institute, ICCS 13: 1st International Conference on Concrete Sustainability, Tokyo, Japan, 27.-29. May 2013, [Conference or Workshop Item]

Koenders, E. A. B. ; Rocha, C. A. A. (2013):
Modeling Pozzolanic Systems for Subsurface Cementitious Systems.
ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, Nantes, France, 9-14 June, [Conference or Workshop Item]

Koenders, E. A. B. ; Ukrainczyk, N. ; Hansen, W. (2012):
Micro-hydration, pore connectivity and durability of cementitious materials.
Rilem Publications s.a.r.l., Second International Conference on Microstructural-related Durability of Cementitious Composites, RILEM, Amsterdam, The Netherlands, 11-13 April 2012, ISBN 9782351581,
[Conference or Workshop Item]

Koenders, E. A. B. ; Ukrainczyk, N. ; Breugel, K. van (2012):
Morphological nature of diffusion in cement paste.
3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR-3, 2012, [Conference or Workshop Item]

Koenders, E. A. B. ; Walraven, J. C. (1997):
Simulation of Volume Changes in Hardening Cement-Based Materials.
Delft University Press,
[Ph.D. Thesis]

L

Lu, T. ; Koenders, E. A. B. (2014):
Modeling and analyzing autogenous shrinkage of hardening cement paste.
DCMat Ageing Centre, Delft University of Technology, 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Conference or Workshop Item]

Lima, C. ; Caggiano, A. ; Faella, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. (2013):
Physical properties and mechanical behaviour of concrete made with recycled aggregates and fly ash.
In: Construction and Building Materials, 47, pp. 547-559. Amsterdam : Elsevier Science, ISSN 0950-0618,
[Article]

Lottman, B. B. G. ; Koenders, E. A. B. ; Blom, C. B. M. ; Walraven, J. C. (2013):
Spalling of concrete due to fire exposure: A coupled fracture mechanics and pore pressure approach.
EDP Sciences, MATEC Web of Conferences 6, 05002 (2013) Concrete Spalling due to Fire Exposure: Proceedings of the 3rd International Workshop, Paris, France, 25 - 27 September 2013, [Conference or Workshop Item]

M

Mankel, Christoph (2020):
Ansatz zur Modellierung von Wärmespeichereigenschaften zementgebundener Baustoffsysteme mit integrierten Phasenwechselmaterialien.
Darmstadt, Technische Universität,
DOI: 10.25534/tuprints-00012718,
[Ph.D. Thesis]

Martinelli, E. ; Pepe, M. ; Koenders, E. A. B. (2018):
A 1D numerical model for simulating early age hydration and related mechanical properties.
pp. 146-152, Delft, Netherlands, RILEM Proceedings (PRO 127) of the Symposium on Concrete Modelling - CONMOD2018, [Conference or Workshop Item]

Mankel, C. ; Caggiano, A. ; Yang, S. ; Ukrainczyk, N. ; Koenders, E. A. B. (2018):
Micro-scale Thermal Simulations of Cement Pastes Containing Microencapsulated Phase Change Materials (MPCM).
In: RILEM Proc. (PRO 127) of the Symposium on Concrete Modelling – CONMOD2018, pp. 311-320,
Delft, The Netherlands, RILEM Publications, Symposium on Concrete Modelling – CONMOD2018, Delft, 27 -30 August 2018, ISBN 978-2-35158-216-9,
[Conference or Workshop Item]

Martinelli, E. ; Lima, C. ; Pepe, M. ; Caggiano, A. ; Faella, C. (2018):
Post-Cracking Response of Hybrid Recycled/Industrial Steel Fiber-Reinforced Concrete.
In: ACI Special Publication, (326), pp. 64.1-64.10. American Concrete Institute, ISSN 0193-2527,
[Article]

Martinelli, E. ; Caggiano, A. (2017):
Numerical Simulation of the Fatigue Behaviour of FRO Strips Glued to a Brittle Substrate.
9th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Berkeley, California USA, 29.05-01.06.2016, [Conference or Workshop Item]

Martinelli, E. ; Koenders, E. A. B. ; Pepe, M. (2017):
State of knowledge on green concrete with recycled aggregates and cement replacement.
In: Recent Advances on Green Concrete for Structural Purposes, pp. 3-27, Basel, Springer, ISBN 978-3-319-56795-2,
DOI: 10.1007/978-3-319-56797-6_1,
[Book Section]

Mankel, C. ; Caggiano, A. ; Ukrainczyk, N. ; Koenders, E. A. B.
Sonzogni, Victorio ; Storti, Mario (eds.) (2017):
Micro-Scale Thermal Analysis of Energy Storage in Cement-Based Composites Containing Phase Change Materials (PCMS).
XXXV (41), In: Mecánica Computacional, pp. 2454-2467,
La Plata, Argentinien, Asociación Argentina de Mecánica Computacional, XXIII Congreso sobre Métodos Numéricos y sus Aplicaciones, La Plata, 7.-10.11.2017, ISSN 2591-3522,
[Conference or Workshop Item]

Maier, Andreas ; Gilka-Bötzow, A. ; Schneider, Jens (2016):
An energy-active facade element from mineralized foam (MF) and micro-reinforced, ultra-high-performance concrete (mrUHPC).
In: Journal of Facade Design and Engineering, 3 (3/4), pp. 289-301. IOS Press, ISSN 2213-3038 (E), 2213-302X (P),
[Article]

Martinelli, E. ; Caggiano, A. (2016):
Structural Response of FRP-to-Concrete Joints under Cyclic Actions: Fracture Mechanics and Fatigue Analysis.
8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016), Hong Kong, China, 14-16 December 2016, [Conference or Workshop Item]

Martinelli, E. ; Caggiano, A. (2016):
Numerical Modelling of Debonding and Fatigue of FRP Strips Glued to Concrete.
INTERNATIONAL WORK SHOP ON RC FRP SEISMIC RETROFITTING, Lyon - France, 19-20 September 2016, [Conference or Workshop Item]

Martinelli, E. ; Caggiano, A. ; Xargay, H. (2015):
An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete.
In: Construction and Building Materials, 94, pp. 290-298. Elsevier, [Article]

Martinelli, E. ; Caggiano, A. (2015):
Modelling the cyclic response of FRP strips glued to a brittle substrate.
In: ISBN: 978-3-905594-65-2,
SMAR 2015 Antalya. Third Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures., Antalya, Turkey, 7.-9. September 2015, [Conference or Workshop Item]

Miao, S. ; Koenders, E. A. B. ; Knobbe, A. (2014):
Automatic baseline correction of strain gauge signals.
In: Structural control & health monitoring, 22 (1), pp. 36-49. ISSN 1545-2263,
[Article]

Martinelli, E. ; Caggiano, A. (2014):
A unified theoretical model for the monotonic and cyclic response of FRP strips glued to concrete.
In: Polymers, 6 (2), pp. 370-381. Multidisciplinary Digital Publishing Institute, ISSN 2073-4360,
[Article]

Martinelli, E. ; Barros, J. A. O. ; Etse, G. ; Ferrara, L. ; Folino, P. C. ; Koenders, E. A. B. ; Toledo Filho, R. D. (2014):
The EnCoRe project: an international network for sustainable concrete.
In: Revue Routes & Transports, 43 (2), pp. 57-61. Association québécoise des transports, [Article]

Martinelli, E. ; Caggiano, A. ; Xargay, H. ; Folino, P. C. (2014):
Studio sperimentale sulle proprietà meccaniche di calcestruzzi rinforzati con fibre metalliche riciclate.
In: ISBN 9788897385592, pp. 251-262,
Atti del 20° Congresso C.T.E. Milano, Milano, Italy, 6.-8. Novembre 2014, [Conference or Workshop Item]

Miao, S. ; Veerman, R. P. ; Koenders, E. A. B. ; Knobbe, A. (2013):
Modal analysis of a concrete highway bridge : structural calculations and vibration-based results.
In: Structural health monitoring for infrastructure sustainability: Proceedings of the 6th international Conference on Structural Health Monitoring of Intelligent Infrastructure SHMII-6, Hong-Kong (China), 9-11 Dec. 2013,
The Hong Kong Polytechnic University, ISBN 978-962-367-768-4,
[Conference or Workshop Item]

Martinelli, E. ; Koenders, E. A. B. ; Caggiano, A. (2013):
Corrigendum to “A numerical recipe for modelling hydration and heat flow in hardening concrete”.
In: Cement and Concrete Composites, 43, p. 86. ISSN 09589465,
[Article]

Martinelli, E. ; Koenders, E. A. B. ; Caggiano, A. (2013):
A numerical recipe for modelling hydration and heat flow in hardening concrete.
In: Cement and Concrete Composites, 40, pp. 48-58. Elsevier, ISSN 0958-9465,
DOI: 10.1016/j.cemconcomp.2013.04.004,
[Article]

Martinelli, E. ; Caggiano, A. (2013):
A novel numerical approach for modelling the monotonic and cyclic response of FRP strips glued to concrete.
In: ISBN 9783033040557, pp. 1-8,
SMAR 2013, Istanbul, Istanbul, Turkey, September 2013, [Conference or Workshop Item]

Martinelli, E. ; Caggiano, A. ; Xargay, H. ; Folino, P. C. ; Etse, G. ; Hernan, A. C. (2013):
Numerical simulation of concrete beams reinforced with mixed recycled/industrial steel fibers.
32, pp. 1597-1610, Mecánica Computacional Vol XXXII, Mendoza, Argentina, 19.-22. November 2013, [Conference or Workshop Item]

Morsy, M. I. N. (2011):
Properties of Rice Straw Cementitious Composite.
Darmstadt, Germany, TU Darmstadt,
[Ph.D. Thesis]

N

Nanukuttan, S. A. ; Ukrainczyk, N. ; Robinson, D. J. ; Koenders, E. A. B. (2016):
Avoiding Overfitting in Inverse Modeling of Chloride Migration in Concrete.
International RILEM Conference Materials, [Conference or Workshop Item]

O

Opatija, C. ; Šipušić, J. (2005):
Nondestructive determination of compressive strength of calcium aluminate cement material.
International Conference MATEST 2005 NDT-Competence & Safety, Zagreb, Coratia, October 2005, [Conference or Workshop Item]

P

Pepe, M. ; Toledo Filho, R. D. ; Koenders, E. A. B. ; Martinelli, E. (2017):
Mix Proportioning for Structural Concrete Containing Recycled Concrete Aggregates.
Vol.2, In: Mix Proportioning for Structural Concrete Containing Recycled Concrete Aggregates, pp. 179-187,
71st RILEM Annual Week & ICACMS 2017, Chennai, India, 03.-08. September 2017, [Conference or Workshop Item]

Pepe, M. ; Romildo, D. T. F. ; Koenders, E. A. B. ; Martinelli, E. (2016):
A novel mix design methodology for Recycled Aggregate Concrete.
In: Construction and Building Materials, 122, pp. 362-372. Elsevier, ISSN 09500618,
[Article]

Pepe, M. ; Toledo Filho, R. D. ; Koenders, E. A. B. ; Martinelli, E. (2014):
Alternative processing procedures for recycled aggregates in structural concrete.
In: Construction and Building Materials, 69, pp. 124-132. Amsterdam : Elsevier Science, ISSN 0950-0618,
[Article]

Pepe, M. ; Koenders, E. A. B. ; Faella, C. ; Martinelli, E. (2014):
Structural concrete made with recycled aggregates: Hydration process and compressive strength models.
In: Mechanics Research Communications, 58, pp. 139-145. ISSN 00936413,
[Article]

Pargar, F. ; Koenders, E. A. B. ; Koleva, D. A. (2014):
The importance of chloride sensors stability in monitoring ageing phenomena in concrete structures: Ag/AgCl electrodes performance in simulated pore-water environment.
DCMat Ageing Centre, Delft University of Technology, 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Conference or Workshop Item]

Pargar, F. ; Koleva, D. A. ; Copuroglu, O. ; Koenders, E. A. B. ; Breugel, K. van (2014):
Evaluation of Ag/AgCI sensors for in-situ monitoring of freee chloride concentration in reinforced concrete structures.
University College London, Young Researchers’ Forum II: Construction Materials, London, UK, 19th February 2014, [Conference or Workshop Item]

Pepe, M. ; Koenders, E. A. B. ; Caggiano, A. ; Lima, C. ; Martinelli, E. (2012):
Sui processi di idratazione e le loro conseguenze sulle proprietà meccaniche di calcestruzzi con componenti riciclati.
410, In: ISBN: 9788890364792, pp. 361-372,
19th CTE 2012, [Conference or Workshop Item]

R

Röser, Frank (2018):
Über die Reaktivität von Betonzusatzstoffen -Ein versuchsbasiertes Hydratationsmodell-.
Darmstadt, Technische Universität,
[Ph.D. Thesis]

Ripani, M. ; Vrech, S. ; Caggiano, A. ; Etse, G. (2013):
Continuum-Based Modelling Of Recycled Aggregate Concrete.
32, pp. 1641-1651, Mecánica Computacional Vol XXXII, Mendoza, Argentina, 19.-22. Novembre 2013, [Conference or Workshop Item]

Rogina, A. ; Ukrainczyk, N. (2010):
Mechanical properties of SBR latex modified mortar.
MATRIB 2010 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 23-25 June 2010, [Conference or Workshop Item]

Rooij, M. R. ; Koenders, E. A. B. ; Dalen, S. M. (2006):
An experimental evaluation of the RCM-method.
Federation Internationale du Béton. Proceedings of the 2nd International Congress, June 5-8,2006, [Conference or Workshop Item]

S

Sasmal, S. ; Thiyagarajan, R. ; Lieberum, K. H. ; Koenders, E. A. B. (2018):
Numerical simulations of progression of damage in concrete embedded chemical anchors.
In: Computers and Concrete, 22 (4), pp. 395-405. Techno-Press, ISSN 1598-8198,
DOI: 10.12989/cac.2018.22.4.395,
[Article]

Sasmal, S. ; Thiyagarajan, R. ; Lieberum, Karl-Heinz ; Koenders, E. A. B. (2018):
Numerical simulations of progression of damage in concrete embedded chemical anchors.
In: Computers and Concrete, (22), pp. 395-405. Techno-Press, ISSN 1598-8198,
[Article]

Schicchi, D. S. ; Caggiano, A. ; Hunkel, Martin ; Koenders, E. A. B. (2018):
Thermodynamically consistent multiscale formulation of a thermo-mechanical problem with phase transformations.
In: Continuum Mechanics and Thermodynamics, Springer, ISSN 0935-1175,
DOI: 10.1007/s00161-018-0682-2,
[Article]

Staquet, S. ; Delsaute, B. ; Fairbairn, E. ; Torrent, R. ; Knoppik, A. ; Ukrainczyk, N. ; Koenders, E. A. B.
Farbairn, M. R. ; Azenha, M. (eds.) (2018):
Mixture proportioning for crack avoidance.
In: Thermal Cracking of Massive Concrete Structures: RILEM TC 254-CMS Star, pp. 357-409, Springer, DOI: 10.1007/978-3-319-76617-1_10,
[Book Section]

Schicchi, D. S. ; Caggiano, A. ; Benito, S. ; Hoffmann, F. (2017):
Mesoscale fracture of a bearing steel: A discrete crack approach on static and quenching problems.
In: Theoretical and Applied Fracture Mechanics, pp. 154-164. Elsevier, ISSN 0167-8442,
DOI: 10.1016/j.tafmec.2017.04.006,
[Article]

Schicchi, D. S. ; Caggiano, A. ; Lübben, T. ; Hunkel, Martin (2017):
On the mesoscale fracture initiation criterion of heterogeneous steels during quenching.
In: Material Performance and Characteristics, (6), pp. 80-104. [Article]

Sasmal, S. ; Lieberum, K. H. ; Koenders, E. A. B. (2016):
Numerical simulation on performance evaluation of chemical anchors embedded in concrete.
Sixth international congress on computational mechanics and simulation, IIT Bombay, Powai, Maharashtra, India, 27th June - 1st July 2016, [Conference or Workshop Item]

Strauss Rambo, D. A. ; Andrade Silva, F. de ; Toledo Filho, R. D. ; Ukrainczyk, N. ; Koenders, E. A. B. (2016):
Tensile strength of a calcium-aluminate cementitious composite reinforced with basalt textile in a high-temperature environment.
In: Cement and Concrete Composites, 70, pp. 183 - 193. ISSN 0958-9465,
[Article]

Schicchi, D. S. ; Caggiano, A. (2015):
A porous-based discontinuous model for ductile fracture in metals.
In: Engineering Fracture Mechanics, 138, pp. 19-32. Elsevier, ISSN 0013-7944,
[Article]

Susanto, A. ; Koleva, D. A. ; Koenders, E. A. B. ; Breugel, K. van (2014):
Modelling the effect of electrical current flow on the hydration process of cement-based materials.
University College London, Young Researchers’ Forum II: Construction Materials, London, UK, 19th February 2014, [Conference or Workshop Item]

Schneider, Jens ; Garrecht, Harald ; Maier, Andreas ; Gilka-Bötzow, Albrecht (2014):
Ein multifunktionales und energetisch aktives Fassadenelement aus Beton.
In: Bautechnik, 91 (3), pp. 167-174. ISSN 1437-0999,
[Article]

Sisomphon, K. ; Copuroglu, O. ; Koenders, E. A. B. (2013):
Effect of exposure conditions on self healing behavior of strain hardening cementitious composites incorporating various cementitious materials.
In: Construction and Building Materials, 42, pp. 217-224. ISSN 09500618,
[Article]

Schneider, J. ; Eisele, J. ; Garrecht, H. ; Rinderknecht, Stephan ; Ahsen, Anette von ; Schiereck, D. ; Kleuderlein, J. ; Lang, F. ; Gilka-Bötzow, Albrecht ; Klein, M. ; Schaede, Hendrik ; Wien, A. ; Bogs, C. (2012):
A New Concept for Energy-Plus-Houses and Their Facades.
Advanced Building Skins, Graz University of Technology, 14-15 Juni 2012, [Conference or Workshop Item]

Sabo, S. ; Ukrainczyk, N. (2011):
Laboratory made differential calorimeter to study cement hydration.
International conference on materials, tribology, recycling, Vela Luka (Croatia), 29.06.-01.07.2011, [Conference or Workshop Item]

Sisomphon, K. ; Koenders, E. A. B. ; Copuroglu, O. (2011):
Surface crack self healing behaviour of mortars with expansive additives (abstract).
ICSHM 2011: Proceedings of the 3rd International Conference on Self-Healing Materials, Bath, UK, 27-29 June 2011, [Conference or Workshop Item]

T

Toledo Filho, R. D. ; Koenders, E. A. B. ; Pepe, M. ; Cordei, G. C. ; Fairbairn, E. ; Martinelli, E. (2013):
Rio 2016 sustainable construction commitments lead to new developments in recycled aggregate concrete.
In: Civil Engineering: Proceedings of the Institution of Civil Engineers, 166 (6), pp. 28-35. ISSN 0965-089X,
[Article]

U

Ukrainczyk, N. ; Koenders, E. A. B.
Breugel, K. van ; Koleva, D. A. ; Beek, T. (eds.) (2018):
Modeling Ageing Cementitious Pore Structure.
In: The Ageing of Materials and Structures, pp. 185-195, Springer, ISBN 978-3-319-70192-9,
DOI: 10.1007/978-3-319-70194-3_14,
[Book Section]

Ukrainczyk, N. ; Koenders, E. A. B.
Farbairn, M. R. ; Azenha, M. (eds.) (2018):
Sustainability Aspects in Mass Concrete.
In: RILEM State-of-the-Art Reports, 27, In: Thermal Cracking of Massive Concrete Structures: RILEM TC 254-CMS STAR, pp. 357-409, Basel, Springer, ISBN 978-3-319-76617-1,
DOI: 10.1007/978-3-319-76617-1_10,
[Book Section]

Ukrainczyk, N. ; Walker, C. S. ; Koenders, E. A. B. (2018):
Numerical Modeling of Cementitious Materials Ageing Under Acid Attack.
In: Proc. (PRO 127) of the Symposium on Concrete Modelling – CONMOD2018, pp. 457-466,
Delft, The Netherlands, RILEM Publications, Symposium on Concrete Modelling – CONMOD2018, Delft, 27 -30 August 2018, ISBN 978-2-35158-216-9,
[Conference or Workshop Item]

Ukrainczyk, N. ; Koenders, E. A. B. ; Stirmer, N. (2017):
Transformation of Wood Ash Waste into Construction Materials.
In: Construction Materials for Sustainable Future: Proceedings of the 1st International Conference CoMS_2017, pp. 95-102,
Zadar, Croatia, 1st Int. Conf. on Construction Materials for Sustainable Future, Zadar, Croatia, 19 - 21 April 2017, [Conference or Workshop Item]

Ukrainczyk, N. ; Koenders, E. A. B. (2016):
Numerical Model for Chloride Ingress in Cement Based Materials: Method of Lines Implementation for Solving Coupled Multi-species Diffusion with Binding.
In: Computations and Materials in Civil Engineering, 1 (3), pp. 109-119. ISSN 2371-2325,
[Article]

Ukrainczyk, N. ; Vrbos, N. ; Koenders, E. A. B. (2016):
Reuse of Woody Biomass Ash Waste in Cementitious Materials.
In: Chemical and Biochemical Engineering Quarterly 30, 30 (2), pp. 137-148. ISSN 0352-9568; doi: 10.15255/CABEQ.2015.2231,
[Article]

Ukrainczyk, N. ; Vogt, O. ; Koenders, E. A. B. (2016):
Reactive Transport Numerical Model for Durability of Geopolymer Materials.
In: Advances in Chemical Engineering and Science, 6 (4), pp. 355-363. Scientific Research, ISSN 2160-0406,
[Article]

Ukrainczyk, N. ; Vogt, O. ; Röser, F. ; Steindlberger, E. ; Koenders, E. A. B. (2015):
Alkali activated binders based on Rhenish Trass.
35th Cement & Concrete Science Conference (CCSC35), University of Aberdeen, UK, 26-28 August 2015, [Conference or Workshop Item]

Ukrainczyk, N. (2015):
Effect of polycarboxylate superplasticiser on properties of calcium aluminate cement mortar.
In: Advances in Cement Research, 27 (7), pp. 388-398. London : Telford, ISSN 0951-7197, 1751-7605,
[Article]

Ukrainczyk, N. ; Hrkovac, M. ; Prlic-Kardum, J. (2015):
Influence of NaCl on Granulometric Characteristics and Polymorphism in Batch-Cooling Crystallization of Glycine.
In: Chemical engineering & technology, 38 (1), pp. 139-146. Weinheim : Wiley-VCH Verl.-Ges, ISSN 1521-4125,
[Article]

Ukrainczyk, N. ; Vogt, O. ; Koenders, E. A. B. (2015):
Reactive transport modeling of alkali leaching from geopolymer materials.
RILEM Int. Conf. Numerical Modeling Strategies for Sustainable Concrete Structures (SSCS 2015), Rio de Janeiro, Brazil, 14-16 December 2015, [Conference or Workshop Item]

Ukrainczyk, N. ; Mandic, V. ; Koenders, E. A. B. (2015):
Cement Hydration with Biomass Ash from Waste Wood Combustion.
35th Cement & Concrete Science Conference (CCSC35), University of Aberdeen, UK, 26-28 August 2015, [Conference or Workshop Item]

Ukrainczyk, N. (2014):
Chemical Shrinkage During Hydration Reactions of Calcium Aluminate Cement.
In: Austin Journal Of Chemical Engineering, 1 (3), ISSN 2381-8905,
[Article]

Ukrainczyk, N. ; Koenders, E. A. B. (2014):
Modeling aging of cementitious pore structure.
DCMat Ageing Centre, Delft University of Technology, 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Conference or Workshop Item]

Ukrainczyk, N. ; Koenders, E. A. B. (2014):
Representative elementary volumes for 3D modeling of mass transport in cementitious materials.
In: Modelling and Simulation in Materials Science and Engineering, 22 (3), pp. 035001. ISSN 0965-0393, 1361-651X,
[Article]

Ukrainczyk, N. ; Koenders, E. A. B. (2014):
Influence of microstructural parameters on effective diffusivity of hydrating cement paste.
In: RILEM International Symposium on Concrete Modelling - CONMOD 2014, pp. 53-60,
RILEM Publications SARL, RILEM International Symposium on Concrete Modelling, Beijing, China, 12 - 14 October 2014, ISBN 978-2-35158-139-1,
[Conference or Workshop Item]

Ukrainczyk, N. ; Koenders, E. A. B. (2014):
3D Simulation of cement paste aging due to reactive transport.
RILEM International Symposium on Concrete Modelling, Beijing, China, 12 - 14 October 2014, [Conference or Workshop Item]

Ukrainczyk, N. ; Rogina, A. (2013):
Styrene–butadiene latex modified calcium aluminate cement mortar.
In: Cement and Concrete Composites, 41, pp. 16-23. ISSN 09589465,
[Article]

Ukrainczyk, N. ; Šipušić, J. ; Vrbos, N. (2013):
Compressive strength of calcium aluminate mortar determined by ultrasonic non-destructive test method.
In: Advances in Cement Research, 25 (3), pp. 143-154. ISSN 0951-7197, 1751-7605,
[Article]

Ukrainczyk, N. ; Zlopasa, J. ; Koenders, E. A. B. (2013):
Hydration Process of Portland Cement Blended with Silica Fume.
In: Advanced Materials Research, 699, pp. 578-583. ISSN 1662-8985,
[Article]

Ukrainczyk, N. ; Koenders, E. A. B. ; Breugel, K. van (2013):
Numerical Algorithm for Pore Size Distribution Characterization of Materials from 3D Images.
In: Advanced Materials Research, 699, pp. 584-589. ISSN 1662-8985,
[Article]

Ukrainczyk, N. ; Koenders, E. A. B. ; Breugel, K. van (2013):
Simulation of pozzolan blended cement hydration.
Japan Concrete Institute, ICCS 13: 1st International Conference on Concrete Sustainability, Tokyo, Japan, 27-29 May 2013, [Conference or Workshop Item]

Ukrainczyk, N. ; Breugel, K. van ; Koenders, E. A. B. (2013):
Numerical model for multi-ion diffusion in cementitious materials - Multidiff code.
MATRIB 2013 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 19th - 21st June 2013, [Conference or Workshop Item]

Ukrainczyk, N. ; Franković Mihelj, N. ; Šipušić, J. (2013):
Calcium Sulfoaluminate Eco-Cement from Industrial Waste.
In: Chemical and Biochemical Engineering Quarterly, 27 (1), pp. 83-93. ISSN 0352-9568,
[Article]

Ukrainczyk, N. ; Koenders, E. A. B. (2013):
Cementitious Sealing Material: 3D Digital Image Based Characterization of Pore Size Distribution and Modeling of Transport Properties.
ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, Nantes, France, 9-14 June, [Conference or Workshop Item]

Ukrainczyk, N. ; Vrbos, N. (2013):
Influence of citric acid on properties of calcium auminate cement based materials.
MATRIB 2013 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 27-29 June 2013, [Conference or Workshop Item]

Ukrainczyk, N. (2013):
Surface impregnated concrete: A comparative study.
RILEM International workshop on performance-based specification and control of concrete durability, Zagreb, Coratia, 2013, [Conference or Workshop Item]

Ukrainczyk, N. ; Koenders, E. A. B. (2012):
Numerical estimation of transport properties of cementitious materials using 3D digital images.
EDP Sciences, EPJ Web of Conferences 56, Cadarache, France, 12-15 November 2012, [Conference or Workshop Item]

Ukrainczyk, N. ; Koenders, E. A. B. ; Breugel, K. van (2012):
Multicomponent modelling of Portland cement hydration reactions.
Rilem publications s.a.r.l., Second International Conference on Microstructural-related Durability of Cementitious Composites, RILEM, Amsterdam, The Netherlands, 11-13 April 2012, ISBN 9782351581,
[Conference or Workshop Item]

Ukrainczyk, N. (2012):
Influence of metal chloride salts on calcium aluminate cement hydration.
In: Advances in cement research 24, 2012 (5), [Article]

Ukrainczyk, N. (2011):
An improved method for obtaining thermal diffusivity of foodstuffs.
In: Croatian Journal of Food Technology, Biotechnology and Nutrition, 6 (1-2), pp. 66-77. [Article]

Ukrainczyk, N. (2011):
3D modeling of transport phenomenon in cement based materials.
MATRIB 2011 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 29. June - 1. July 2011, [Conference or Workshop Item]

Ukrainczyk, N. ; Dabić, P. (2011):
Calcium Aluminate Cement Hydration Model.
In: Kemija u industriji / Chemistry in Industry/Journal of Chemists and Chemical Engineers, 60 (1), pp. 1-10. [Article]

Ukrainczyk, N. ; Vrbos, N. (2011):
Effect of organic additives on hydration of aluminate cement.
MATRIB 2011 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 29. June - 1. July 2011, [Conference or Workshop Item]

Ukrainczyk, N. (2011):
Iron - Aluminium solid solution in Klein's compound.
3rd International Symposium on Environmental Management, Zagreb, Coratia, 26-28 October 2011, [Conference or Workshop Item]

Ukrainczyk, N. ; Dabić, P. (2011):
Model procesa hidratacije aluminatnog cementa.
In: Kemija u industriji (Chemistry in industry), 60 (1), pp. 1-10. ISSN 0022-9830,
[Article]

Ukrainczyk, N. ; Rogina, A. (2011):
SBR latex repair mortar properties.
MATRIB 2011 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 29. June - 1. July 2011, [Conference or Workshop Item]

Ukrainczyk, N. (2011):
Waste Phosphogypsum – Toward Sustainable Reuse in Calcium Sulfoaluminate Cement Based Building Materials.
In: Chemical and Biochemical Engineering Quarterly, 27 (2), pp. 26-28. ISSN 0352-9568,
[Article]

Ukrainczyk, N. (2010):
Kinetic modeling of calcium aluminate cement hydration.
In: Chemical Engineering Science, 65 (20), pp. 5605-5614. ISSN 00092509,
[Article]

Ukrainczyk, N. ; Matusinovic, T. (2010):
Thermal properties of hydrating calcium aluminate cement pastes.
In: Cement and Concrete Research, 40 (1), pp. 128-136. ISSN 00088846,
[Article]

Ukrainczyk, N. (2010):
Chemical shrinkage of hydrating calcium aluminate cement.
MATRIB 2010 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 23-25 June 2010, [Conference or Workshop Item]

Ukrainczyk, N. ; Rogina, A. (2010):
Setting time regulation of polymer modified calcium aluminate cement based materials.
MATRIB 2010 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 23-25 June 2010, [Conference or Workshop Item]

Ukrainczyk, N. ; Kurajica, S. ; Šipušić, J. (2010):
Thermophysical comparison of five commercial paraffin waxes as latent heat storage materials.
In: Chemical and Biochemical Engineering Quarterly Journal, 24 (2), pp. 129-137. [Article]

Ukrainczyk, N. ; Matusinovic, T. (2010):
Modeling of solid fraction evolution during calcium aluminate cement hydration.
International Conference On Material Science and 64th RILEM, Aache, Germany, September 2010, [Conference or Workshop Item]

Ukrainczyk, N. (2009):
Thermal diffusivity estimation using numerical inverse solution for 1D heat conduction.
In: International Journal of Heat and Mass Transfer, 52 (25-26), pp. 5675-5681. ISSN 00179310,
[Article]

Ukrainczyk, N. (2009):
Determination of thermal conductivity by transient hot wire method.
MATRIB 2009 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 24-26 June 2009, [Conference or Workshop Item]

Ukrainczyk, N. (2009):
Influence of transition metal - chloride salts on cac hydration.
MATRIB 2009 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 24-26 June 2009, [Conference or Workshop Item]

Ukrainczyk, V. ; Ukrainczyk, N. (2008):
A neural network method for analysing concrete durability.
In: Magazine of Concrete Research, 60 (7), pp. 475-486. ISSN 0024-9831, 1751-763X,
[Article]

Ukrainczyk, N. ; Šipušić, J. (2008):
Microcalorimetric study on calcium aluminate cement hydration.
MATRIB 2008 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 26-28 June 2008, [Conference or Workshop Item]

Ukrainczyk, N. (2008):
Microstructural Model of Calcium Aluminate Cement Hydration.
Minerals To Materials International Conference- M2M08: Bridging the Gap between Minerals and Materials, Cairo, Egypt, 15-18 December 2008, [Conference or Workshop Item]

Ukrainczyk, N. ; Matusinovic, T. ; Kurajica, S. ; Zimmermann, B. ; Sipusic, J. (2007):
Dehydration of a layered double hydroxide—C2AH8.
In: Thermochimica Acta, 464 (1-2), pp. 7-15. ISSN 00406031,
[Article]

Ukrainczyk, N. ; Banjad Pecur, I. ; Bolf, N. (2007):
Evaluating rebar corrosion damage in RC structures exposed to marine environment using neural network.
In: Civil Engineering and Environmental Systems, 24 (1), pp. 15-32. ISSN 1028-6608, 1029-0249,
[Article]

Ukrainczyk, N. ; Ukrainczyk, M. (2006):
XRD and TGA investigation of hardened cement paste degradation.
MATRIB 2006 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 22-24 June 2006, [Conference or Workshop Item]

Ukrainczyk, N. ; Matusinovic, T. (2005):
Comparison of neutral network durability models for reinforced concrete structures.
MATRIB 2005 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 5-8-June 2005, [Conference or Workshop Item]

Ukrainczyk, N. ; Pečur, I. B. (2004):
Application of neutral work in predicting damage of concrete structures caused by chlorides.
International Symposium on Durability and Maintenance of Concrete Structures, Dubrovnik, Croatia, 2004, [Conference or Workshop Item]

V

Vogt, Oliver ; Ballschmiede, Conrad ; Ukrainczyk, Neven ; Koenders, Eddie (2021):
Evaluation of Sulfuric Acid-Induced Degradation of Potassium Silicate Activated Metakaolin Geopolymers by Semi-Quantitative SEM-EDX Analysis. (Publisher's Version)
In: Materials, 13 (20), MDPI, ISSN 1996-1944,
DOI: 10.26083/tuprints-00019250,
[Article]

Vogt, Oliver (2021):
Zur Säurebeständigkeit von Geopolymeren. (Publisher's Version)
Darmstadt, Technische Universität,
DOI: 10.26083/tuprints-00019711,
[Ph.D. Thesis]

Vallejo Quintanilla, M. ; Koleva, D. A. ; Koenders, E. A. B. (2018):
Corrosion Resistance of Construction Steel in Conditions of Simultaneous Dynamic Loading and Chloride-Containing Corrosive Environment.
In: Journal of Materials in Civil Engineering, 30 (6), ASCE Library, DOI: 10.1061/(ASCE) MT.1943-5533.0002275,
[Article]

Vergoosen, R. P. H. ; Wolfert, A. R. M. ; Koenders, E. A. B. (2017):
Objective risk based structural assessment of existing concrete structures.
Delft, The Netherlands, Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure - 5th International Symposium on Life-Cycle Engineering, IALCCE 2016, Delft, The Netherlands, 16.-19.10.2016, [Conference or Workshop Item]

Vogt, O. ; Ukrainczyk, N. ; Koenders, E. A. B. (2017):
Geopolymere als Spezialbaustoff.
In: Nachrichten aus der Chemie, 65 (12), pp. 1198-1202. Wiley, ISSN 1439-9598,
DOI: 10.1002/nadc.20174065079,
[Article]

Vogt, O. ; Ukrainczyk, N. ; Steindlberger, E. ; Koenders, E. A. B. (2016):
Geopolymerisation activity of Eifel Tuff.
pp. 653-662, Int. Conf. on Concrete Sustainability (ICCS16), Madrid, Spain, 13-15 Juni 2016, [Conference or Workshop Item]

Vrech, Sonia ; Etse, G. ; Caggiano, A. (2016):
Thermodynamically consistent elasto-plastic microplane formulation for fiber reinforced concrete.
In: International Journal of Solids and Structures, 81, pp. 337-349. Elsevier, [Article]

Vistos, L. ; Caggiano, A. ; Martinelli, E. ; Folino, P. C. (2016):
The incidence of concrete quality on buckling analysis of slender columns.
In: Meso-scale simulation of the post-cracking behaviour of hybrid industrial/recycled steel fibre-reinforced concrete, pp. 411-420,
4th Workshop on New Boundaries of Structural Concrete, Capri Island - Italy, September 29-October 1 2016, ISBN 978-88-98720-14-9,
[Conference or Workshop Item]

Vistos, L. ; Galladini, D. ; Xargay, H. ; Caggiano, A. ; Folino, P. C. ; Martinelli, E. (2016):
Hybrid Industrial/Recycled SFRC: Experimental Analysis and Design.
In: ISBN: 978-88-99916-02-2,
Italian Concrete Days 2016 - Giornate aicap e Congresso C.T.E., Rom - Italy, 27-29 OTTOBRE 2016, [Conference or Workshop Item]

Volland, S. ; Brötz, J. (2015):
Lightweight aggregates produced from sand sludge and zeolitic rocks.
In: Construction and Building Materials, 85, pp. 22-29. Elsevier Science Publishing, ISSN 09500618,
[Article]

Vrech, S. ; Caggiano, A. ; Etse, G. (2015):
Continuous Microplane Theory and Interface Approach for Failure Form Analysis of Steel Fiber Reinforced Concrete.
In: ISBN: 978-84-943928-2-5, pp. 249-260,
1st Pan-American Congress on Computational Mechanics - PANACM 2015 & MECOM 2015, Buenos Aires, Argentina, 27.-29. April 2015, [Conference or Workshop Item]

Veerman, R. P. ; Koenders, E. A. B. (2014):
Structural monitoring and modal properties of a real time bridge and lab tests.
Universities Press, 4th international FIB congress, Mumbai, India, 10-14 February 2014, ISBN 9788173719,
[Conference or Workshop Item]

Veerman, R. P. ; Koenders, E. A. B. (2014):
Changing model properties with time due to corrosion of a dynamically loaded reinforced concrete beam.
DCMat Ageing Centre, Delft University of Technology, 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Conference or Workshop Item]

Volland, S. ; Kazmina, O. ; Vereshchagin, V. ; Dushkina, M. (2014):
Recycling of sand sludge as a resource for lightweight aggregates.
In: Construction and Building Materials, 52, pp. 361-365. [Article]

Volland, S. ; Vereshchagin, V. ; Kazmina, O. (2014):
Characterization of pore structure of lightweight aggregates produced from sand sludge.
In: Darmstadt Concrete, (29), [Article]

Veerman, R. P. ; Koenders, E. A. B. (2014):
Automatic Degradation Detection During a Dynamic Loaded Beam Test.
CIC 2014: The 1st Concrete Innovation Conference, Oslo, Norway, 11-13 June 2014, [Conference or Workshop Item]

Vrbos, N. ; Ukrainczyk, N. ; Šipušić, J. (2014):
polycarboxylate ether based superplasticiser for calcium aluminate cement mortars, calcium aluminates.
Calcium Aluminates: International Conference, Avignon, France, 18–21 May 2014, [Conference or Workshop Item]

Veerman, R. P. ; Miao, S. ; Koenders, E. A. B. ; Knobbe, A. (2013):
Data-intensive structural health monitoring in the infrawatch project.
The Hong Kong Polytechnic University, 6th international Conference on Structural Health Monitoring of Intelligent Infrastructure SHMII-6, Hong-Kong, China, 9-11 Dec. 2013, ISBN 9789623677,
[Conference or Workshop Item]

Veerman, R. P. ; Koenders, E. A. B. (2013):
Understanding the impact of degradation of concrete structures.
IABSE, International IABSE Conference: Assessment, Upgrading and Refurbishment of Infrastructures, Rotterdam, The Netherlands, 6-8 May 2013, ISBN 9783857481,
[Conference or Workshop Item]

Volland, S. ; Vereshchagin, V. ; Kazmina, O. ; Dushkina, M. (2013):
Properties of lightweight aggregate produces from sand sludge.
In: GDCh-Monograph, 1st International Conference on the Chemistry of Construction Materials, 46, pp. 411-414. [Article]

Vrech, S. ; Ripani, M. ; Etse, G. ; Caggiano, A. (2013):
Constitutive modeling for failure properties analysis of concrete with recycled aggregates.
In: ISBN: 9788890429279, pp. 63-72,
3rd Workshop "The new boundaries of structural concrete", Bergamo, Italy, 3.-4. October 2013, [Conference or Workshop Item]

Volland, S. ; Vereshchagin, V. (2012):
Cellular glass ceramic materials on the basis of zeolitic rock.
In: Construction and Building Materials, 36, pp. 940-946. [Article]

Vereshchagin, V. ; Volland, S. ; Kazmina, O. (2012):
Entwicklung neuer Herstellungsverfahren von leichten glaskristallischen Materialien aus Primär-und Recyclingrohstoffen.
In: Darmstadt Concrete, 27, pp. 25-26. [Article]

Volokitin, G. G. ; Skripnikova, N. K. ; Volland, S. (2011):
Technology for producing mineral fibers by recycling ash-sludge and oil-shale wastes.
In: Glass and Ceramics, 68 (7-8), pp. 239-241. [Article]

Volland, S. (2010):
Entwicklung neuer Herstellungsverfahren von gebrannten porösen Materialien aus zeolithhaltigen Gesteinen.
In: Materialien zum wissenschaftlichen Seminar der Stipendiaten des „Michail Lomonosov“-Programms 2009/2010, pp. 175-178, [Book Section]

Volland, S. ; Vereshchagin, V. (2010):
Lightweight granular material from zeolite rocks with different additives.
In: Construction and Building Materials, 24, pp. 625-629. [Article]

W

Weidle, Alexandra (2019):
Untersuchungen zur schädigenden Ettringitbildung bei der Baugrundverbesserung mit hydraulischen Bindemitteln in tonmineralhaltigen Böden.
Darmstadt, Technische Universität,
[Ph.D. Thesis]

Weise, K. ; Jonkers, H. ; Koenders, E. A. B. (2018):
A Preliminary Study on the Self-Healing Potential of Bacteria-Modified Fibres in Concrete.
pp. 1043-1048, Funchal; Madeira, Portugal, SynerCrete'18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, [Conference or Workshop Item]

Weise, K. ; Röser, F. ; Ukrainczyk, N. ; Koenders, E. A. B. (2017):
Reactivity of Slag-Cement Blends by Thermogravimetric Analysis.
Vol.2, In: Reactivity of Slag-Cement Blends by Thermogravimetric Analysis, pp. 633-640,
71st RILEM Annual Week & ICACMS 2017, Chennai, India, 03.-08. September 2017, [Conference or Workshop Item]

X

Xargay, H. ; Folino, P. ; Nuñez, N. ; Gómez, M. ; Caggiano, A. ; Martinelli, E. (2018):
Acoustic Emission behavior of thermally damaged Self-Compacting High Strength Fiber Reinforced Concrete.
In: Construction and Building Materials, (187), pp. 519-530. Amsterdam : Elsevier Science, ISSN 0950-0618,
[Article]

Xargay, H. ; Caggiano, A. ; Folino, P. C. ; Lima, C. ; Martinelli, E. (2015):
Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete: Pull-out behaviour and post-cracking flexural strength (Extented abstract).
COMAT 2015 VI International Conference on Science and Technology of Composite Materials, Buenos Aires, Argentina, 7.-8. May 2015, [Conference or Workshop Item]

Y

Yang, Sha ; Ukrainczyk, Neven ; Caggiano, Antonio ; Koenders, Eddie (2021):
Numerical Phase-Field Model Validation for Dissolution of Minerals. (Publisher's Version)
In: Applied Sciences, 11 (6), MDPI, e-ISSN 2076-3417,
DOI: 10.26083/tuprints-00019324,
[Article]

Yang, S. ; Ukrainczyk, N. ; Koenders, E. A. B. (2018):
A Thermal Conductivity Model for Rubberised Mortar.
Rio de Janeiro, Brasilien, Proceedings of the 4th Brazilian Conference on composite Materials, 22.07 - 25.07.2018, [Conference or Workshop Item]

Yang, S. ; Ukrainczyk, N. ; Koenders, E. A. B. (2018):
Thermal Conductivity of Rubberised-Mortar by Meso-scale Numerical Modeling.
In: Proc. (PRO 127) of the Symposium on Concrete Modelling – CONMOD2018,
Delft, The Netherlands, RILEM Publications, Symposium on Concrete Modelling – CONMOD2018, Delft, 27 -30 August 2018, ISBN 978-2-35158-216-9,
[Conference or Workshop Item]

Z

Zimmermann, Adrian ; Yang, Sha ; Koenders, E. A. B. (2016):
Crumb Rubber as a Concrete Additive: Effect of Specific Surface on Air Void Content.
pp. 251-258, 3rd International RILEM Conference on Microstructure Related Durability of Cementitious Composites, Nanjing (China), 24-26 October 2016, [Conference or Workshop Item]

Zimmermann, A. ; Röser, F. ; Koenders, E. A. B. (2016):
Formation of air pores in concrete due to the addition of tire crumb rubber.
pp. 633-644, Int. Conf. on Concrete Sustainability (ICCS16), Madrid, Spain, 13-15 Juni 2016, [Conference or Workshop Item]

Zlopasa, J. ; Norder, B. ; Koenders, E. A. B. ; Picken, S. J. (2016):
Rheological investigation of specific interactions in Na Alginate and Na MMT Suspension.
In: Carbohydrate Polymers, 151, pp. 144-149. Elsevier, ISSN 0144-8617,
[Article]

Zlopasa, J. ; Norder, B. ; Koenders, E. A. B. ; Picken, S. J. (2015):
Origin of Highly Ordered Sodium Alginate/Montmorillonite Bionanocomposites.
In: Macromolecules, 48 (4), pp. 1204-1209. ISSN 0024-9297, 1520-5835,
[Article]

Zlopasa, J. ; Picken, S. J. ; Koenders, E. A. B. (2014):
Using bio-based polymers for curing cement-based materials.
DCMat Ageing Centre, Delft University of Technology, 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Conference or Workshop Item]

Zlopasa, J. ; Koenders, E. A. B. ; Ukrainczyk, N. ; Rocha, C. A. A. ; Toledo Filho, R. D. (2014):
Puzzolanic reactions in cementitious materials for subsurface applications.
ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering OMAE2014, San Francisco, California, USA, 8-13 June 2014, [Conference or Workshop Item]

Zhang, Q. ; Ye, G. ; Koenders, E. A. B. (2013):
Investigation of the structure of heated Portland cement paste by using various techniques.
In: Construction and Building Materials, 38, pp. 1040-1050. ISSN 09500618,
[Article]

This list was generated on Sun Jan 23 01:09:44 2022 CET.