TU Darmstadt / ULB / TUbiblio

Items in division

Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Date | Item Type | Language | No Grouping
Number of items at this level: 268.

Alexandrakis, Elena Ourania (2019):
Temperaturabhängigkeit von Befestigungen in Asphalt.
Darmstadt, Technische Universität, [Online-Edition: https://tuprints.ulb.tu-darmstadt.de/8508],
[Ph.D. Thesis]

Sasmal, S. and Thiyagarajan, R. and Lieberum, K. H. and Koenders, E. A. B. (2018):
Numerical simulations of progression of damage in concrete embedded chemical anchors.
In: Computers and Concrete, Techno-Press, pp. 395-405, 22, (4), ISSN 1598-8198,
DOI: 10.12989/cac.2018.22.4.395,
[Article]

Sasmal, S. and Thiyagarajan, R. and Lieberum, Karl-Heinz and Koenders, E. A. B. (2018):
Numerical simulations of progression of damage in concrete embedded chemical anchors.
In: Computers and Concrete, Techno-Press, pp. 395-405, (22), ISSN 1598-8198,
[Article]

Drugă, Bogdan and Ukrainczyk, N. and Weise, K. and Koenders, E. A. B. and Lackner, Susanne (2018):
Interaction between wastewater microorganisms and geopolymer or cementitious materials: Biofilm characterization and deterioration characteristics of mortars.
In: International Biodeterioration & Biodegradation, Elsevier, pp. 58-67, (134), ISSN 0964-8305,
[Article]

Drugă, Bogdan and Ukrainczyk, N. and Weise, Kira and Koenders, E. A. B. and Lackner, Susanne (2018):
Interaction between wastewater microorganisms and geopolymer or cementitious materials: Biofilm characterization and deterioration characteristics of mortars.
In: International Biodeterioration & Biodegradation, Elsevier, pp. 58-67, 134, ISSN 0964-8305,
DOI: 10.1016/j.ibiod.2018.08.005,
[Article]

Koenders, E. A. B. and Ukrainczyk, N. and Caggiano, A. and Gilka-Bötzow, A.
Lange, Jörg and Rädel, F. (eds.) (2018):
Werkstoffinnovationen im Bauwesen.
In: Festschrift Jörg Lange, Darmstadt, Universitäts- und Landesbibliothek Darmstadt, pp. 177-183, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/7466/],
[Book Section]

Schicchi, D. S. and Caggiano, A. and Hunkel, Martin and Koenders, E. A. B. (2018):
Thermodynamically consistent multiscale formulation of a thermo-mechanical problem with phase transformations.
In: Continuum Mechanics and Thermodynamics, Springer, ISSN 0935-1175,
DOI: 10.1007/s00161-018-0682-2,
[Article]

Vallejo Quintanilla, M. and Koleva, D. A. and Koenders, E. A. B. (2018):
Corrosion Resistance of Construction Steel in Conditions of Simultaneous Dynamic Loading and Chloride-Containing Corrosive Environment.
In: Journal of Materials in Civil Engineering, ASCE Library, (Volume 30 Issue 6), DOI: 10.1061/(ASCE) MT.1943-5533.0002275,
[Article]

Jefferson, Tony and Javierre, Etelvina and Freeman, Brubeck and Zaoui, Ali and Koenders, E. A. B. and Ferrara, Liberato (2018):
Research Progress on Numerical Models for Self-Healing Cementitious Materials.
In: Advanced Materials Interfaces, Wiley-VCH Verlag GmbH & Co. KGaA, 5, (17), ISSN 2196-7350,
DOI: 10.1002/admi.201701378,
[Online-Edition: https://onlinelibrary.wiley.com/doi/epdf/10.1002/admi.201701...],
[Article]

Caggiano, A. and Schicchi, D. S. and Mankel, C. and Ukrainczyk, N. and Koenders, E. A. B. (2018):
A mesoscale approach for modeling capillary water absorption and transport phenomena in cementitious materials.
In: Computers & Structures, Elsevier, pp. 1-10, 200, ISSN 0045-7949,
DOI: 10.1016/j.compstruc.2018.01.013,
[Article]

Knaack, Ulrich and Koenders, E. A. B.
Knaack, Ulrich and Koenders, E. A. B. (eds.) (2018):
Bauphysik der Fassade.
Darmstadt, Birkhäuser, [Book]

Koenders, E. A. B. and Gilka-Bötzow, A. and Caggiano, A. and Ukrainczyk, N.
Pahn, Matthias and Thiele, Catherina and Glock, Christian (eds.) (2018):
Energy Efficiency as a Driver for Materials Innovations.
In: Vielfalt im Massivbau – Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell, Berlin, Ernst & Sohn, pp. 527-541, [Book Section]

Röser, Frank (2018):
Über die Reaktivität von Betonzusatzstoffen -Ein versuchsbasiertes Hydratationsmodell-.
Darmstadt, Technische Universität, [Online-Edition: http://tuprints.ulb.tu-darmstadt.de/7672],
[Ph.D. Thesis]

Koenders, E. A. B. and Gilka-Bötzow, A. and Caggiano, A. and Ukrainczyk, N. (2018):
Energy Efficiency as a driver for materials innovations.
In: VIELFALT IM MASSIVBAU, Festschrift zum 65. Geburstag von Prof. Dr.-Ing. Jürgen Schnell, Berlin, Ernst & Sohn - A Wiley Brand, pp. 789-805, [Book Section]

Ukrainczyk, N. and Koenders, E. A. B.
Van Breugel, K. and Koleva, D. A. and Beek, T. (eds.) (2018):
Modeling Ageing Cementitious Pore Structure.
In: The Ageing of Materials and Structures, Springer, pp. 185-195, DOI: 10.1007/978-3-319-70194-3_14,
[Book Section]

Staquet, S. and Delsaute, B. and Fairbairn, E. and Torrent, R. and Knoppik, A. and Ukrainczyk, N. and Koenders, E. A. B.
Farbairn, M. R. and Azenha, M. (eds.) (2018):
Mixture proportioning for crack avoidance.
In: Thermal Cracking of Massive Concrete Structures: RILEM TC 254-CMS Star, Springer, pp. 357-409, DOI: 10.1007/978-3-319-76617-1_10,
[Book Section]

Ukrainczyk, N. and Koenders, E. A. B.
Farbairn, M. R. and Azenha, M. (eds.) (2018):
Sustainability Aspects in Mass Concrete.
In: Thermal Cracking of Massive Concrete Structures: RILEM TC 254-CMS STAR, Basel, Springer, pp. 357-409, DOI: 10.1007/978-3-319-76617-1_10,
[Book Section]

Weise, K. and Jonkers, H. and Koenders, E. A. B. (2018):
A Preliminary Study on the Self-Healing Potential of Bacteria-Modified Fibres in Concrete.
Funchal; Madeira, Portugal, In: SynerCrete'18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, [Conference or Workshop Item]

Koenders, E. A. B. (2018):
Frome Early Age Relaxation to Microstructure Formation.
Delft, Netherlands, In: RILEM Proceedings (Pro 127) of the Symposium on Concrete Modelling - CONMOD2018, [Conference or Workshop Item]

Martinelli, E. and Pepe, M. and Koenders, E. A. B. (2018):
A 1D numerical model for simulating early age hydration and related mechanical properties.
Delft, Netherlands, In: RILEM Proceedings (PRO 127) of the Symposium on Concrete Modelling - CONMOD2018, [Conference or Workshop Item]

Koenders, E. A. B. and Röser, F. (2018):
Zu einem versuchsbasierten Hydratationsmodell.
Weimar, Deutschland, In: 20. IBAUSIL, Weimar, 12.-14.09.2018, [Conference or Workshop Item]

Koenders, E. A. B. and Ukrainczyk, N. and Caggiano, A. (2018):
Modelling the Self-Healing Portential of Dissoluble Encapsulated Cement.
Glasgow, Schottland, In: 6th European Conference on Computational Mechanics (ECCM 6), 7th Conference on Computational Fluid Dynamics (EFCD 7), Glasgow, UK, 11.-15.06.2018, [Conference or Workshop Item]

Yang, S. and Ukrainczyk, N. and Koenders, E. A. B. (2018):
A Thermal Conductivity Model for Rubberised Mortar.
Rio de Janeiro, Brasilien, In: Proceedings of the 4th Brazilian Conference on composite Materials, 22.07 - 25.07.2018, [Conference or Workshop Item]

Harenberg, S. and Caggiano, A. and Koenig, A. and Said, D. and Gilka-Bötzow, A. and Schultz-Cornelius, M. and Yang, S. and Pahn, M. and Dehn, F. and Koenders, E. A. B. (2018):
Micromechanical behavior of UHPC under cyclic bending-tensile loading in consideration of the influence of the concrete edge zone.
Wien, In: 89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), München, 19.-23.03.2018, [Conference or Workshop Item]

Herrling, Maria Pia and Ukrainczyk, N. and Lackner, Susanne and Nägler, J and Koenders, E. A. B.
Bertron, A. and Jonkers, H. (eds.) (2018):
Bioreceptivity of geopolymers in wastewater: preliminary comparison with conventional mortars.
In: Microorganisms-Cementitious Materials Interactions, Toulouse, Frankreich, In: Final Conf. of RILEM TC 253-MCI: Microorganisms-Cementitious Materials Interactions, Toulouse, 25.-26.06.2018, ISBN 978-2-35158-207-7,
[Conference or Workshop Item]

Drugă, Bogdan and Weise, K. and Ukrainczyk, N. and Muthu, M. and Lackner, Susanne and Koenders, E. A. B.
Bertron, A. and Jonkers, H. (eds.) (2018):
Interaction of Wastewater Microorganisms with Geopolymers and Cementitious Materials.
In: Microorganisms-Cementitious Materials Interactions, Toulouse, Frankreich, In: Final Conf. of RILEM TC 253-MCI: Microorganisms-Cementitious Materials Interactions, Toulouse, 25.-26.06.2018, ISBN 978-2-35158-207-7,
[Conference or Workshop Item]

Grengg, C. and Mittermayr, F. and Ukrainczyk, N. and Koenders, E. A. B. and Günther, K. and Dietzel, Mathias
Bertron, A. and Jonkers, H. (eds.) (2018):
Microbial Induced Acid Corrosion from a Field Perspective - Advances in Process Understanding and Construction Material Development.
In: Microorganisms-Cementitious Materials Interactions, Toulouse, Frankreich, In: Final Conf. of RILEM TC 253-MCI: Microorganisms-Cementitious Materials Interactions, Toulouse, 25.-26.06.2018, ISBN 978-2-35158-207-7,
[Conference or Workshop Item]

Koenders, E. A. B. and Ukrainczyk, N. and Caggiano, A. (2018):
Modelling the Self-Healing potential of dissoluble encapsulated cement.
In: Proc. of the 6th European Conference on Computational Mechanics (ECCM 6) and the 7th European Conference on Computational Fluid Dynamics (ECFD 7), Glasgow, Schottland, In: 6th European Conference on Computational Mechanics (ECCM 6) and the 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11.06 - 15.06.2018, [Conference or Workshop Item]

Ukrainczyk, N. and Walker, C. S. and Koenders, E. A. B. (2018):
Numerical Modeling of Cementitious Materials Ageing Under Acid Attack.
In: Proc. (PRO 127) of the Symposium on Concrete Modelling – CONMOD2018, Delft, The Netherlands, RILEM Publications, In: Symposium on Concrete Modelling – CONMOD2018, Delft, 27 -30 August 2018, ISBN 978-2-35158-216-9,
[Conference or Workshop Item]

Yang, S. and Ukrainczyk, N. and Koenders, E. A. B. (2018):
Thermal Conductivity of Rubberised-Mortar by Meso-scale Numerical Modeling.
In: Proc. (PRO 127) of the Symposium on Concrete Modelling – CONMOD2018, Delft, The Netherlands, RILEM Publications, In: Symposium on Concrete Modelling – CONMOD2018, Delft, 27 -30 August 2018, ISBN 978-2-35158-216-9,
[Conference or Workshop Item]

Mankel, C. and Caggiano, A. and Yang, S. and Ukrainczyk, N. and Koenders, E. A. B. (2018):
Micro-scale Thermal Simulations of Cement Pastes Containing Microencapsulated Phase Change Materials (MPCM).
In: RILEM Proc. (PRO 127) of the Symposium on Concrete Modelling – CONMOD2018, Delft, The Netherlands, RILEM Publications, In: Symposium on Concrete Modelling – CONMOD2018, Delft, 27 -30 August 2018, ISBN 978-2-35158-216-9,
[Conference or Workshop Item]

Caggiano, A. and Schicchi, D. S. and Etse, G. and Ripani, M. (2018):
Meso-scale response of concrete under high temperature based on coupled thermo-mechanical and pore-pressure interface modeling.
In: Engineering Failure Analysis, Elsevier, pp. 167-188, (85), ISSN 1350-6307,
[Article]

Benedetto, M. F. and Caggiano, A. and Etse, G. (2018):
Virtual elements and zero thickness interface-based approach for fracture analysis of heterogeneous materials.
In: Computer Methods in Applied Mechanics and Engineering, Elsevier, pp. 41-67, (338), ISSN 00457825,
[Article]

Caggiano, A. and Martinelli, E. and Schicchi, D. S. and Etse, G. (2018):
A modified Duvaut-Lions zero-thickness interface model for simulating the rate-dependent bond behavior of FRP-concrete joints.
In: Composites Part B: Engineering, pp. 260-267, (149), ISSN 1359-8368,
[Article]

Xargay, H. and Folino, P. and Nuñez, N. and Gómez, M. and Caggiano, A. and Martinelli, E. (2018):
Acoustic Emission behavior of thermally damaged Self-Compacting High Strength Fiber Reinforced Concrete.
In: Construction and Building Materials, Amsterdam : Elsevier Science, pp. 519-530, (187), ISSN 0950-0618,
[Article]

Martinelli, E. and Lima, C. and Pepe, M. and Caggiano, A. and Faella, C. (2018):
Post-Cracking Response of Hybrid Recycled/Industrial Steel Fiber-Reinforced Concrete.
In: ACI Special Publication, American Concrete Institute, pp. 64.1-64.10, (326), ISSN 0193-2527,
[Article]

Jefferson, Tony and Javierre, Etelvina and Freeman, Brubeck and Zaoui, Ali and Koenders, E. A. B. and Ferrara, L. (2018):
Research Progress on Numerical Models for Self-Healing Cementitious Materials.
In: Advanced Materials Interfaces, pp. 1701378 (5-19), 5, (17), ISSN 2196-7350,
DOI: 10.1002/admi.201701378,
[Article]

Caggiano, A. and Mankel, C. and Koenders, E. A. B. (2018):
Reviewing theoretical and numerical models for PCM-embedded cementitious composites.
In: MDPI Buildings, MDPI, 9, (1), DOI: 10.3390/buildings9010003,
[Article]

Koenders, E. A. B. (2018):
Modelling of chloride ingress in concrete based on benchmarking field results.
In: MATEC Web Conferences, Cape Town, South Africa, In: 5th International Conference on Concrete Repair, Rehabilitation, and Retrofitting (ICCRRR 2018), Cape Town, South Africa, 19-21. November 2018, 199,, DOI: 10.1051/matecconf/201819901005,
[Conference or Workshop Item]

Grengg, C. and Mittermayr, F. and Ukrainczyk, N. and Koenders, E. A. B. and Koraimann, G. and Kienesberger, S. and Dietzel, Mathias (2018):
Microbial induced acid corrosion from a field perspective - Advances in process understanding and construction material development.
In: MATEC Web Conferences, Cape Town, South Africa, In: 5th International Conference on Concrete Repair, Rehabilitation, and Retrofitting (ICCRRR 2018), Cape Town, South Africa, 19-21. November 2018, DOI: 10.1051/matecconf/201819902002,
[Conference or Workshop Item]

Grengg, C. and Mittermayr, F. and Ukrainczyk, N. and Koraimann, G. and Kienesberger, S. and Dietzel, Mathias (2018):
Advances in concrete based construction materials for sewer systems affected by microbial induced concrete corrosion: A review.
In: Water Research, pp. 341-352, (134), ISSN 0043-1354,
[Article]

Pepe, M. and Toledo Filho, R. D. and Koenders, E. A. B. and Martinelli, E. (2017):
Mix Proportioning for Structural Concrete Containing Recycled Concrete Aggregates.
In: Mix Proportioning for Structural Concrete Containing Recycled Concrete Aggregates, In: 71st RILEM Annual Week & ICACMS 2017, Chennai, India, 03.-08. September 2017, Vol.2, [Conference or Workshop Item]

Weise, K. and Röser, F. and Ukrainczyk, N. and Koenders, E. A. B. (2017):
Reactivity of Slag-Cement Blends by Thermogravimetric Analysis.
In: Reactivity of Slag-Cement Blends by Thermogravimetric Analysis, In: 71st RILEM Annual Week & ICACMS 2017, Chennai, India, 03.-08. September 2017, Vol.2, [Conference or Workshop Item]

Herget, C. A. and Vogt, O. and Zimmermann, A. and Ukrainczyk, N. and Koenders, E. A. B. (2017):
Design of Geopolymers with Reduced Content of Metakaolin and Silicate Solution.
In: Design of Geopolymers with Reduced Content of Metakaolin and Silicate Solution, In: 71st RILEM Annual Week & ICACMS 2017, Chennai, India, 03.-08. September 2017, Vol. 3, [Conference or Workshop Item]

Alencar, D. and Carvalho, D. B. F. and Koenders, E. A. B. and Mourão, F. and Rocha, L. (2017):
Devising a computational model based on data mining techniques to predict concrete compressive strength.
In: Procedia Computer Science 108C (2017), Elsevier, In: International Conference on Computational Science, ICCS 2017, Zurich Switzerland, 12.-14. June 2017, 108, [Conference or Workshop Item]

Caggiano, A. and Barros, J. A. O. and Etse, G. (2017):
Advanced Numerical Models for the Analysis of Sustainable FRC Structures.
In: Recent Advances on Green Concrete for Structural Purposes, Springer, pp. 363-401, DOI: 10.1007/978-3-319-56797-6_12,
[Book Section]

Barros, J. A. O. and Frazão, Carlos and Caggiano, A. and Folino, P. C. and Martinelli, E. and Xargay, H. and Zamanzadeh, Z. and Lourenço, L. (2017):
Cementitious Composites Reinforced with Recycled Fibres.
In: Recent Advances on Green Concrete for Structural Purposes, Basel, Springer, pp. 104-195, DOI: 10.1007/978-3-319-56797-6_8,
[Book Section]

Caggiano, A. and Etse, G. and Folino, P. C. and Ripani, M. and Vrech, S. (2017):
Constitutive Formulations for Concrete with Recycled Aggregates.
In: Recent Advances on Green Concrete for Structural Purposes, Basel, Springer, pp. 109-122, DOI: 10.1007/978-3-319-56797-6_5,
[Book Section]

Martinelli, E. and Caggiano, A. (2017):
Numerical Simulation of the Fatigue Behaviour of FRO Strips Glued to a Brittle Substrate.
In: 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Berkeley, California USA, 29.05-01.06.2016, [Online-Edition: http://www.framcos.org/FraMCoS-9.php#gsc.tab=0],
[Conference or Workshop Item]

Koenders, E. A. B. and Martinelli, E. and Pepe, M. and Toledo Filho, R. D. (2017):
Generalised mix design rules for concrete with recycled aggregates.
In: Recent Advances on Green Concrete for Structural Purposes, Basel, Springer, pp. 123-134, DOI: 10.1007/978-3-319-56797-6_6,
[Book Section]

Martinelli, E. and Koenders, E. A. B. and Pepe, M. (2017):
State of knowledge on green concrete with recycled aggregates and cement replacement.
In: Recent Advances on Green Concrete for Structural Purposes, Basel, Springer, pp. 3-27, DOI: 10.1007/978-3-319-56797-6_1,
[Book Section]

Etse, G. and Caggiano, A. (2017):
Degradation of Concrete Mechanical Behavior due to Temperature Effects.
Calgary, Canada, In: IEEE-IAS/PCA Cement Industry, Technical Conference. IEEE Industry Applications Society., 21.05.2017 - 25.05.2017, DOI: 10.1109/CITCON.2017.7951845,
[Conference or Workshop Item]

Caggiano, A. and Pepe, M. and Lima, C. and Folino, P. C. and Martinelli, E. (2017):
Experimental Characterization of the Post-Cracking Response in Hybrid Recycled/Industrial Steel Fiber-Reinforced Concrete.
Chennai, India, In: Advances in Construction Materials Systems, [Conference or Workshop Item]

Vergoosen, R. P. H. and Wolfert, A. R. M. and Koenders, E. A. B. (2017):
Objective risk based structural assessment of existing concrete structures.
Delft, The Netherlands, In: Life-Cycle of Engineering Systems: Emphasis on Sustainable Civil Infrastructure - 5th International Symposium on Life-Cycle Engineering, IALCCE 2016, Delft, The Netherlands, 16.-19.10.2016, [Conference or Workshop Item]

Ukrainczyk, N. and Koenders, E. A. B. and Stirmer, N. (2017):
Transformation of Wood Ash Waste into Construction Materials.
In: Construction Materials for Sustainable Future: Proceedings of the 1st International Conference CoMS_2017, Zadar, Croatia, In: 1st Int. Conf. on Construction Materials for Sustainable Future, Zadar, Croatia, 19 - 21 April 2017, [Conference or Workshop Item]

Mankel, C. and Caggiano, A. and Ukrainczyk, N. and Koenders, E. A. B.
Sonzogni, Victorio and Storti, Mario (eds.) (2017):
Micro-Scale Thermal Analysis of Energy Storage in Cement-Based Composites Containing Phase Change Materials (PCMS).
In: Mecánica Computacional, La Plata, Argentinien, Asociación Argentina de Mecánica Computacional, In: XXIII Congreso sobre Métodos Numéricos y sus Aplicaciones, La Plata, 7.-10.11.2017, XXXV (41), ISSN 2591-3522,
[Online-Edition: https://cimec.org.ar/ojs/index.php/mc/article/view/5457],
[Conference or Workshop Item]

Vogt, O. and Ukrainczyk, N. and Koenders, E. A. B. (2017):
Geopolymere als Spezialbaustoff.
In: Nachrichten aus der Chemie, Wiley, pp. 1198-1202, 65, (12), ISSN 1439-9598,
DOI: 10.1002/nadc.20174065079,
[Online-Edition: https://onlinelibrary.wiley.com/doi/abs/10.1002/nadc.2017406...],
[Article]

Schicchi, D. S. and Caggiano, A. and Benito, S. and Hoffmann, F. (2017):
Mesoscale fracture of a bearing steel: A discrete crack approach on static and quenching problems.
In: Theoretical and Applied Fracture Mechanics, Elsevier, pp. 154-164, ISSN 0167-8442,
DOI: 10.1016/j.tafmec.2017.04.006,
[Article]

Caggiano, A. and Etse, G. and Ferrara, L. and Krelani, V. (2017):
Zero-thickness interface constitutive theory for concrete self-healing effects.
In: Computers & Structures, Elsevier, pp. 22-34, (186), ISSN 0045-7949, 0366-7138,
[Article]

Schicchi, D. S. and Caggiano, A. and Lübben, T. and Hunkel, Martin (2017):
On the mesoscale fracture initiation criterion of heterogeneous steels during quenching.
In: Material Performance and Characteristics, pp. 80-104, (6), [Article]

Caggiano, A. and Folino, P. C. and Lima, C. and Martinelli, E. and Pepe, M. (2017):
On the mechanical response of Hybrid Fiber Reinforced Concrete with Recycled and Industrial Steel Fibers.
In: Construction and Building Materials, Amsterdam : Elsevier Science, pp. 286-295, (147), ISSN 0950-0618,
[Article]

Gilka-Bötzow, A.
Koenders, E. A. B. (ed.) (2016):
Stabilität von ultraleichten Schaumbetonen - Betrachtung instationärer Porenstrukturen.
Wiesbaden, Springer Vieweg, In: Werkstoffe im Bauwesen | Construction and Building Materials, 1, ISBN 978-3-658-16595-6,
[Online-Edition: http://www.springer.com/de/book/9783658165956],
[Book]

Caggiano, A. and Gambarelli, S. and Martinelli, E. and Nisticò, N. and Pepe, M. (2016):
Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete.
In: Construction and Building Materials, Elsevier, pp. 1035-1043, 125, [Article]

Ukrainczyk, N. and Koenders, E. A. B. (2016):
Numerical Model for Chloride Ingress in Cement Based Materials: Method of Lines Implementation for Solving Coupled Multi-species Diffusion with Binding.
In: Computations and Materials in Civil Engineering, pp. 109-119, 1, (3), ISSN 2371-2325,
[Online-Edition: http://gspiralpublishing.com/index.php/CMCE/article/view/75/...],
[Article]

Zimmermann, Adrian and Yang, Sha and Koenders, E. A. B. (2016):
Crumb Rubber as a Concrete Additive: Effect of Specific Surface on Air Void Content.
In: 3rd International RILEM Conference on Microstructure Related Durability of Cementitious Composites, Nanjing (China), 24-26 October 2016, [Conference or Workshop Item]

Nanukuttan, S. A. and Ukrainczyk, N. and Robinson, D. J. and Koenders, E. A. B. (2016):
Avoiding Overfitting in Inverse Modeling of Chloride Migration in Concrete.
In: International RILEM Conference Materials, [Conference or Workshop Item]

Gilka-Bötzow, A. and Ukrainczyk, N. and Koenders, E. A. B. (2016):
Modelling Mineral Foam Morphology Dynamics for Stability and Insulation Properties.
In: Proceedings of 4th Workshop on The New Boundaries of Structural Concrete, Capri, In: The New Boundaries of Structural Concrete 2016, Villa Orlandi, Capri Island - Italy, September 29 - October 1 2016, [Online-Edition: http://www.aciitaly.com/events/nbsc2016/nbsc2016.php],
[Conference or Workshop Item]

Coelho, M. and Caggiano, A. and Sena-Cruz, J. and Neves, L. (2016):
Fracture-based interface model for FRP NSM systems in concrete.
In: Composite structures : an international journal, pp. 816-828, 152, ISSN 0263-8223,
[Article]

Pepe, M. and Romildo, D. T. F. and Koenders, E. A. B. and Martinelli, E. (2016):
A novel mix design methodology for Recycled Aggregate Concrete.
In: Construction and Building Materials, Elsevier, pp. 362-372, (122), ISSN 09500618,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0950061816...],
[Article]

Sasmal, S. and Lieberum, K. H. and Koenders, E. A. B. (2016):
Numerical simulation on performance evaluation of chemical anchors embedded in concrete.
In: Sixth international congress on computational mechanics and simulation, IIT Bombay, Powai, Maharashtra, India, 27th June - 1st July 2016, [Conference or Workshop Item]

Maier, Andreas and Gilka-Bötzow, A. and Schneider, Jens (2016):
An energy-active facade element from mineralized foam (MF) and micro-reinforced, ultra-high-performance concrete (mrUHPC).
In: Journal of Facade Design and Engineering, IOS Press, pp. 289-301, 3, (3/4), ISSN 2213-3038 (E), 2213-302X (P),
[Article]

Gilka-Bötzow, A. and Zimmer, M. and Koenders, E. A. B. (2016):
Material Properties of mineralized foam and its density dependency - a meta-study.
In: Int. Conf. on Concrete Sustainability (ICCS16), Madrid, Spain, 13-15 Juni 2016, [Online-Edition: http://www.iccs16.org/frontal/doc/Ebook%20ICCS.pdf],
[Conference or Workshop Item]

Zimmermann, A. and Röser, F. and Koenders, E. A. B. (2016):
Formation of air pores in concrete due to the addition of tire crumb rubber.
In: Int. Conf. on Concrete Sustainability (ICCS16), Madrid, Spain, 13-15 Juni 2016, [Online-Edition: http://www.iccs16.org/frontal/doc/Ebook%20ICCS.pdf],
[Conference or Workshop Item]

Vogt, O. and Ukrainczyk, N. and Steindlberger, E. and Koenders, E. A. B. (2016):
Geopolymerisation activity of Eifel Tuff.
In: Int. Conf. on Concrete Sustainability (ICCS16), Madrid, Spain, 13-15 Juni 2016, [Online-Edition: http://www.iccs16.org/frontal/doc/Ebook%20ICCS.pdf],
[Conference or Workshop Item]

Ukrainczyk, N. and Vrbos, N. and Koenders, E. A. B. (2016):
Reuse of Woody Biomass Ash Waste in Cementitious Materials.
In: Chemical and Biochemical Engineering Quarterly 30, pp. 137-148, ISSN 0352-9568; doi: 10.15255/CABEQ.2015.2231,
[Online-Edition: http://silverstripe.fkit.hr/cabeq/past-issues/article/934],
[Article]

Zlopasa, J. and Norder, B. and Koenders, E. A. B. and Picken, S. J. (2016):
Rheological investigation of specific interactions in Na Alginate and Na MMT Suspension.
In: Carbohydrate Polymers 151, Elsevier, pp. 144-149, ISSN 0144-8617,
[Online-Edition: doi:10.1016/j.carbpol.2016.05.055],
[Article]

Gilka-Bötzow, Albrecht (2016):
Betrachtung instationärer zementöser Schaumstrukturen.
Darmstadt, Eigenverlag, TU Darmstadt, [Ph.D. Thesis]

Vrech, Sonia and Etse, G. and Caggiano, A. (2016):
Thermodynamically consistent elasto-plastic microplane formulation for fiber reinforced concrete.
In: International Journal of Solids and Structures, Elsevier, pp. 337-349, 81, [Article]

Alexandrakis, E. and Lieberum, Karl-Heinz and Koenders, E. A. B. (2016):
Befestigungen in Asphalt.
In: 37th Int. Conference on Mechanics of Materials, Sensbachtal, In: 37th Int. Conference on Mechanics of Materials, Sensbachtal, [Conference or Workshop Item]

Strauss Rambo, D. A. and de Andrade Silva, F. and Toledo Filho, R. D. and Ukrainczyk, N. and Koenders, E. A. B. (2016):
Tensile strength of a calcium-aluminate cementitious composite reinforced with basalt textile in a high-temperature environment.
In: Cement and Concrete Composites, pp. 183 - 193, 70, ISSN 0958-9465,
[Online-Edition: http://www.sciencedirect.com/science/article/pii/S0958946516...],
[Article]

Ukrainczyk, N. and Vogt, O. and Koenders, E. A. B. (2016):
Reactive Transport Numerical Model for Durability of Geopolymer Materials.
In: Advances in Chemical Engineering and Science, Scientific Research, pp. 355-363, (6), ISSN 2160-0406,
[Online-Edition: http://file.scirp.org/pdf/ACES_2016091614060072.pdf],
[Article]

Coelho, M. and Caggiano, A. and Sena-Cruz, J. and Neves, L. (2016):
Lei constitutiva para a simulacão da ligacão de sistemas NSM FRP no betão.
In: Encontro Nacional BETÃO ESTRUTURAL, DEC - Universidade de Coimbra, 2 a 4 de novembro de 2016, [Conference or Workshop Item]

Ferrara, L. and Caggiano, A. and Luzio, G. and Etse, G. and Gettu, R. and Krelani, V. and Rocha Ferreira, S. and Roig Flores, M. and Serna, P. and Toledo Filho, R. D. (2016):
Five Years of International Collaborative Research on Self-Healing Capacity of Cementitious Composites.
In: fib Symposium 2016 - the International Federation for Structural Engineering, Cape Town, South Africa, 21-23 November 2016, [Conference or Workshop Item]

Etse, G. and Schicchi, D. S. and Caggiano, A. and Ripani, M. (2016):
Discontinuos Approach for Meso-Scale Modeling of Porous Materials like Concrete under High Temperature.
In: 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Berkeley, California USA, 29.05-01.06.2016, [Online-Edition: http://www.framcos.org/FraMCoS-9.php#gsc.tab=0],
[Conference or Workshop Item]

Martinelli, E. and Caggiano, A. (2016):
Structural Response of FRP-to-Concrete Joints under Cyclic Actions: Fracture Mechanics and Fatigue Analysis.
In: 8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016), Hong Kong, China, 14-16 December 2016, [Conference or Workshop Item]

Caggiano, A. and Schicchi, D. S. and Etse, G. and Martinelli, E. (2016):
Meso-Scale Modeling of Hybrid Industrial/Recycled Steel Fiber-Reinforced Concrete.
In: Proceedings of the VII European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2016) ISBN: 978-618-82844-0-1, In: ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece, 5–10 June 2016, [Conference or Workshop Item]

Caggiano, A. and Schicchi, D. S. and Martinelli, E. and Etse, G. (2016):
Meso-scale simulation of the post-cracking behaviour of hybrid industrial/recycled steel fibre-reinforced concrete.
In: ISBN:978-88-98720-14-9, In: 4th Workshop on New Boundaries of Structural Concrete, Capri Island - Italy, September 29-October 1 2016, [Conference or Workshop Item]

Vistos, L. and Caggiano, A. and Martinelli, E. and Folino, P. C. (2016):
The incidence of concrete quality on buckling analysis of slender columns.
In: Meso-scale simulation of the post-cracking behaviour of hybrid industrial/recycled steel fibre-reinforced concrete, In: 4th Workshop on New Boundaries of Structural Concrete, Capri Island - Italy, September 29-October 1 2016, ISBN 978-88-98720-14-9,
[Conference or Workshop Item]

Martinelli, E. and Caggiano, A. (2016):
Numerical Modelling of Debonding and Fatigue of FRP Strips Glued to Concrete.
In: INTERNATIONAL WORK SHOP ON RC FRP SEISMIC RETROFITTING, Lyon - France, 19-20 September 2016, [Conference or Workshop Item]

Vistos, L. and Galladini, D. and Xargay, H. and Caggiano, A. and Folino, P. C. and Martinelli, E. (2016):
Hybrid Industrial/Recycled SFRC: Experimental Analysis and Design.
In: ISBN: 978-88-99916-02-2, In: Italian Concrete Days 2016 - Giornate aicap e Congresso C.T.E., Rom - Italy, 27-29 OTTOBRE 2016, [Conference or Workshop Item]

Caggiano, A. and Xargay, H. and Galladini, D. and Vistos, L. and Folino, P. C. and Martinelli, E. (2016):
Hormigon reforzado con fibras de acero industriales y recicladas: analisis experimental del comportamiento mecanico.
In: ISBN: 978-987-23292-3-5, In: 24º Jornadas Argentinas de Ingeniería Estructural, Buenos Aires, 28.-30. September 2016, [Conference or Workshop Item]

Galladini, D. and Vistos, L. and Caggiano, A. and Etse, G. (2016):
Hormigon reforzado con fibras de acero industriales y recicladas: reglas de diseño para uso estructural.
In: ISBN: 978-987-23299-3-5, In: 24º Jornadas Argentinas de Ingeniería Estructural, Buenos Aires, 28.-30. September 2016, [Conference or Workshop Item]

Martinelli, E. and Caggiano, A. and Xargay, H. (2015):
An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete.
In: Construction and Building Materials, Elsevier, pp. 290-298, 94, [Article]

Etse, G. and Ripani, M. and Caggiano, A. and Schicchi, D. S. (2015):
Strength and durability of concrete subjected to high temperature: continuous and discrete constitutive approaches.
In: ACI Special Publication, American Concrete Institute, pp. 9.1-9.18, SP 305, ISSN 0193-2527,
[Article]

Caggiano, A. and Xargay, H. and Folino, P. C. and Martinelli, E. (2015):
Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices.
In: Cement and Concrete Composites, Barking, Essex : Elsevier, pp. 146-155, 62, ISSN 0958-9465,
[Article]

Hoornahad, H. and Koenders, E. A. B. and Van Breugel, K. (2015):
Wettability of particles and its effect on liquid bridges in wet granular materials.
In: Journal of Silicate Based and Composite Materials, pp. 143-146, 67, (4), ISSN 0013-970X,
[Online-Edition: http://dx.doi.org/10.14382/epitoanyag-jsbcm.2015.23],
[Article]

Volland, S. and Brötz, J. (2015):
Lightweight aggregates produced from sand sludge and zeolitic rocks.
In: Construction and Building Materials, Elsevier Science Publishing, pp. 22-29, 85, ISSN 09500618,
[Online-Edition: http://dx.doi.org/10.1016/j.conbuildmat.2015.03.018],
[Article]

Caggiano, A. and Etse, G. (2015):
Coupled thermo-mechanical interface model for concrete failure analysis under high temperature.
In: Computer methods in applied mechanics and engineering, Elsevier, pp. 498-516, 289, ISSN 0045-7825,
[Article]

Gilka-Bötzow, A. and Röser, F. and Koenders, E. A. B. (2015):
Mineral Foam in Energy Active Buildings.
Nagasaki, Japan, In: International Conference on the Regeneration and Conservation of Concrete Structures, Nagasaki, Japan, 01.05.2015, [Conference or Workshop Item]

Schicchi, D. S. and Caggiano, A. (2015):
A porous-based discontinuous model for ductile fracture in metals.
In: Engineering Fracture Mechanics, Elsevier, pp. 19-32, 138, ISSN 0013-7944,
[Article]

Ukrainczyk, N. and Vogt, O. and Röser, F. and Steindlberger, E. and Koenders, E. A. B. (2015):
Alkali activated binders based on Rhenish Trass.
In: 35th Cement & Concrete Science Conference (CCSC35), University of Aberdeen, UK, 26-28 August 2015, [Conference or Workshop Item]

Gilka-Bötzow, A. and Koenders, E. A. B. (2015):
Rheological behavior of the continuous phase of foams and its effect on the dispersed phase.
Regensburg, In: 24. Workshop und Kolloquium Rheologische Messungen an Baustoffen, Regensburg, 11. und 12. März 2015, [Conference or Workshop Item]

Zlopasa, J. and Norder, B. and Koenders, E. A. B. and Picken, S. J. (2015):
Origin of Highly Ordered Sodium Alginate/Montmorillonite Bionanocomposites.
In: Macromolecules, pp. 1204-1209, 48, (4), ISSN 0024-9297, 1520-5835,
[Online-Edition: http://pubs.acs.org/doi/abs/10.1021/ma502147m],
[Article]

Caggiano, A. and Schicchi, D. S. (2015):
A thermo-mechanical interface model for simulating the bond behaviour of FRP strips glued to concrete substrates exposed to elevated temperature.
In: Engineering Structures, Elsevier, pp. 243-251, 83, ISSN 0141-0296,
[Article]

Ukrainczyk, N. (2015):
Effect of polycarboxylate superplasticiser on properties of calcium aluminate cement mortar.
In: Advances in Cement Research, London : Telford, pp. 388-398, 27, (7), ISSN 0951-7197, 1751-7605,
[Online-Edition: http://www.icevirtuallibrary.com/doi/abs/10.1680/adcr.14.000...],
[Article]

Ukrainczyk, N. and Hrkovac, M. and Prlic-Kardum, J. (2015):
Influence of NaCl on Granulometric Characteristics and Polymorphism in Batch-Cooling Crystallization of Glycine.
In: Chemical engineering & technology, Weinheim : Wiley-VCH Verl.-Ges, pp. 139-146, 38, (1), ISSN 1521-4125,
[Online-Edition: DOI: 10.1002/ceat.201400462],
[Article]

Ukrainczyk, N. and Vogt, O. and Koenders, E. A. B. (2015):
Reactive transport modeling of alkali leaching from geopolymer materials.
In: RILEM Int. Conf. Numerical Modeling Strategies for Sustainable Concrete Structures (SSCS 2015), Rio de Janeiro, Brazil, 14-16 December 2015, [Conference or Workshop Item]

Ukrainczyk, N. and Mandic, V. and Koenders, E. A. B. (2015):
Cement Hydration with Biomass Ash from Waste Wood Combustion.
In: 35th Cement & Concrete Science Conference (CCSC35), University of Aberdeen, UK, 26-28 August 2015, [Conference or Workshop Item]

Alexandrakis, E. (2015):
Befestigungen in Asphalt.
In: 36th Int. Conference on Mechanics of Materials, Sensbachtal, Germany, February 2015, [Conference or Workshop Item]

Coelho, M. and Caggiano, A. and Sena-Cruz, J. and Neves, L. (2015):
A comparison between interface constitutive models: Total approach versus plasticity approach.
In: The 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015) Joint Conference, Nanjing, China, 14.-16. Dezember 2015, [Conference or Workshop Item]

Xargay, H. and Caggiano, A. and Folino, P. C. and Lima, C. and Martinelli, E. (2015):
Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete: Pull-out behaviour and post-cracking flexural strength (Extented abstract).
In: COMAT 2015 VI International Conference on Science and Technology of Composite Materials, Buenos Aires, Argentina, 7.-8. May 2015, [Conference or Workshop Item]

Caggiano, A. and Krelani, V. and Ferrara, L. and Etse, G. (2015):
Zero-Thickness Interface Formulation For Fracture Analysis Of Self-Healing Concrete.
In: ISBN: 978-84-943928-2-5, In: 1st Pan-American Congress on Computational Mechanics - PANACM 2015 - MECOM 2015, Buenos Aires, Argentina, 27.-29. April 2015, [Conference or Workshop Item]

Vrech, S. and Caggiano, A. and Etse, G. (2015):
Continuous Microplane Theory and Interface Approach for Failure Form Analysis of Steel Fiber Reinforced Concrete.
In: ISBN: 978-84-943928-2-5, In: 1st Pan-American Congress on Computational Mechanics - PANACM 2015 & MECOM 2015, Buenos Aires, Argentina, 27.-29. April 2015, [Conference or Workshop Item]

Coelho, M. and Caggiano, A. and Sena-Cruz, J. and Neves, L. (2015):
Comparação entre modelos constitutivos de interface: abordagem total versus abordagem com plasticidade,.
In: ISBN 978-989-8793-02-7, Universidade do Minho, In: SPREB-FRP 2015 Proceedings, UM Guimarães, 2015, [Conference or Workshop Item]

Martinelli, E. and Caggiano, A. (2015):
Modelling the cyclic response of FRP strips glued to a brittle substrate.
In: ISBN: 978-3-905594-65-2, In: SMAR 2015 Antalya. Third Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures., Antalya, Turkey, 7.-9. September 2015, [Conference or Workshop Item]

Gilka-Bötzow, A. (2014):
A new approach to the production of mineralized foam.
In: Darmstadt concrete : annual journal on concrete and concrete structures, Darmstadt : TU, (28), ISSN 0931-1181,
[Article]

Hoornahad, H. and Koenders, E. A. B. (2014):
A performance -based method for granular based method for granular -paste mix design.
Universidade do Minho, In: 9th international masonry conference, Guimarães, Portugal, 2014, [Online-Edition: http://resolver.tudelft.nl/uuid:a67ac45e-69d6-4bdd-85a9-6374...],
[Conference or Workshop Item]

Gaitero, J. J. and Dolado, J. S. and Neuen, C. and Heber, F. and Koenders, E. A. B. (2014):
Computacional en 3D del lixiviado de calcio en matrices de cemento.
In: Materiales de Construcción, pp. e035, 64, (316), ISSN 1988-3226, 0465-2746,
[Online-Edition: http://materconstrucc.revistas.csic.es/index.php/materconstr...],
[Article]

Veerman, R. P. and Koenders, E. A. B. (2014):
Structural monitoring and modal properties of a real time bridge and lab tests.
Universities Press, In: 4th international FIB congress, Mumbai, India, 10-14 February 2014, ISBN 9788173719,
[Online-Edition: http://resolver.tudelft.nl/uuid:1290c48f-40ba-4084-8818-7879...],
[Conference or Workshop Item]

Hoornahad, H. and Koenders, E. A. B. (2014):
Simulating macroscopic behavior of self-compacting mixtures with DEM.
In: Cement and Concrete Composites, Barking, Essex : Elsevier, pp. 80-88, 54, ISSN 0958-9465,
[Online-Edition: http://dx.doi.org/10.1016/j.cemconcomp.2014.04.006],
[Article]

Huyeng, Tim-Jonathan (2014):
Untersuchung der Temperatur und Feuchteverteilung in der Luft des Passivhaus Hallenbades „Bambados“ zur Beurteilung der Verdunstungsmengen des Beckenwassers.
TU Darmstadt, [Bachelor Thesis]

Pepe, M. and Toledo Filho, R. D. and Koenders, E. A. B. and Martinelli, E. (2014):
Alternative processing procedures for recycled aggregates in structural concrete.
In: Construction and Building Materials, Amsterdam : Elsevier Science, pp. 124-132, 69, ISSN 0950-0618,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S095006181400703...],
[Article]

Koenders, E. A. B. and Hansen, W. and Ukrainczyk, N. and Toledo Filho, R. D. (2014):
Modeling pore continuity and durability of cementitious sealing material.
In: Journal of Energy Resources Technology, New York, NY : ASME, 136, (4), ISSN 0195-0738,
[Article]

Zlopasa, J. and Picken, S. J. and Koenders, E. A. B. (2014):
Using bio-based polymers for curing cement-based materials.
DCMat Ageing Centre, Delft University of Technology, In: 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Online-Edition: http://resolver.tudelft.nl/uuid:dd760c59-7f6f-40b1-9ed7-c965...],
[Conference or Workshop Item]

Pepe, M. and Koenders, E. A. B. and Faella, C. and Martinelli, E. (2014):
Structural concrete made with recycled aggregates: Hydration process and compressive strength models.
In: Mechanics Research Communications, pp. 139-145, 58, ISSN 00936413,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S009364131400011...],
[Article]

Veerman, R. P. and Koenders, E. A. B. (2014):
Changing model properties with time due to corrosion of a dynamically loaded reinforced concrete beam.
DCMat Ageing Centre, Delft University of Technology, In: 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Online-Edition: http://resolver.tudelft.nl/uuid:1bf3dbc5-b798-470d-a68f-720c...],
[Conference or Workshop Item]

Pargar, F. and Koenders, E. A. B. and Koleva, D. A. (2014):
The importance of chloride sensors stability in monitoring ageing phenomena in concrete structures: Ag/AgCl electrodes performance in simulated pore-water environment.
DCMat Ageing Centre, Delft University of Technology, In: 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Online-Edition: http://resolver.tudelft.nl/uuid:23c5c7aa-fbea-44c7-a0ec-fc91...],
[Conference or Workshop Item]

Hansen, W. and Liu, Z. and Koenders, E. A. B. (2014):
Viscoelastic stress modeling in cementitious materials using constant viscoelastic hydration modulus.
DCMat Ageing Centre, Delft University of Technology, In: 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Online-Edition: http://resolver.tudelft.nl/uuid:6f2fe376-15f1-423b-b8a1-9699...],
[Conference or Workshop Item]

Ukrainczyk, N. and Koenders, E. A. B. (2014):
Modeling aging of cementitious pore structure.
DCMat Ageing Centre, Delft University of Technology, In: 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Online-Edition: http://resolver.tudelft.nl/uuid:7e960e4b-1270-4428-82e0-99c9...],
[Conference or Workshop Item]

Lu, T. and Koenders, E. A. B. (2014):
Modeling and analyzing autogenous shrinkage of hardening cement paste.
DCMat Ageing Centre, Delft University of Technology, In: 1st Ageing of Materials & Structures Conference, Delft, The Netherlands, 26-28 May 2014, ISBN 9789461863,
[Online-Edition: http://resolver.tudelft.nl/uuid:b992b334-28d8-4834-989f-3e6a...],
[Conference or Workshop Item]

Miao, S. and Koenders, E. A. B. and Knobbe, A. (2014):
Automatic baseline correction of strain gauge signals.
In: Structural control & health monitoring, pp. 36-49, 22, (1), ISSN 1545-2263,
[Online-Edition: http://doi.wiley.com/10.1002/stc.1658],
[Article]

Alexandrakis, E. (2014):
Stoßartige Belastung an Befestigungen in Asphalt.
In: 35th Int. Conference on Mechanics of Materials, Faliraki, Greece, June 2014, [Conference or Workshop Item]

Ukrainczyk, N. and Koenders, E. A. B. (2014):
Representative elementary volumes for 3D modeling of mass transport in cementitious materials.
In: Modelling and Simulation in Materials Science and Engineering, pp. 035001, 22, (3), ISSN 0965-0393, 1361-651X,
[Online-Edition: http://stacks.iop.org/0965-0393/22/i=3/a=035001?key=crossref...],
[Article]

Zlopasa, J. and Koenders, E. A. B. and Ukrainczyk, N. and Rocha, C. A. A. and Toledo Filho, R. D. (2014):
Puzzolanic reactions in cementitious materials for subsurface applications.
In: ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering OMAE2014, San Francisco, California, USA, 8-13 June 2014, [Conference or Workshop Item]

Susanto, A. and Koleva, D. A. and Koenders, E. A. B. and Van Breugel, K. (2014):
Modelling the effect of electrical current flow on the hydration process of cement-based materials.
University College London, In: Young Researchers’ Forum II: Construction Materials, London, UK, 19th February 2014, [Online-Edition: http://resolver.tudelft.nl/uuid:53e5c6a3-ed05-4afe-aaf7-6cb8...],
[Conference or Workshop Item]

Gaitero, J. J. and Dolado, J. S. and Neuen, C. and Heber, F. and Koenders, E. A. B. (2014):
3D computational simulation of calcium leaching in cement matrices.
In: Materiales de Construcción, 64, (316), ISSN 1988-3226, 0465-2746,
[Online-Edition: http://dx.doi.org/10.3989/mc.2014.08813],
[Article]

Martinelli, E. and Caggiano, A. (2014):
A unified theoretical model for the monotonic and cyclic response of FRP strips glued to concrete.
In: Polymers, Multidisciplinary Digital Publishing Institute, pp. 370-381, 6, (2), ISSN 2073-4360,
[Article]

Pargar, F. and Koleva, D. A. and Copuroglu, O. and Koenders, E. A. B. and Breugel, K. van (2014):
Evaluation of Ag/AgCI sensors for in-situ monitoring of freee chloride concentration in reinforced concrete structures.
University College London, In: Young Researchers’ Forum II: Construction Materials, London, UK, 19th February 2014, [Online-Edition: http://resolver.tudelft.nl/uuid:95faa6e6-bfa9-4f7b-8e25-de4a...],
[Conference or Workshop Item]

Koenders, E. A. B. and Pepe, M. and Martinelli, E. (2014):
Compressive strength and hydration processes of concrete with recycled aggregates.
In: Cement and Concrete Research, pp. 203-212, 56, ISSN 0008-8846,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S000888461300251...],
[Article]

Volland, S. and Kazmina, O. and Vereshchagin, V. and Dushkina, M. (2014):
Recycling of sand sludge as a resource for lightweight aggregates.
In: Construction and Building Materials, pp. 361-365, 52, [Online-Edition: http://www.sciencedirect.com/science/article/pii/S0950061813...],
[Article]

Volland, S. and Vereshchagin, V. and Kazmina, O. (2014):
Characterization of pore structure of lightweight aggregates produced from sand sludge.
In: Darmstadt Concrete, (Vol. 29), [Article]

Kazmina, O. V. and Dushkina, M. A. and Volland, S. (2014):
Low temperature synthesis of composition porous materials from mortar sands.
In: Nanostruc 2014, 2nd International Conference on Structural Nano Composites, Materials Science and Eng, [Article]

Kazmina, O. V. and Dushkina, M. A. and Vereshchagin, V. and Volland, S. (2014):
Use of dispersive screenings of mortar sands for obtaining foam glass-crystal materials.
In: Stroitelnye materialy, pp. 93-97, [Article]

Veerman, R. P. and Koenders, E. A. B. (2014):
Automatic Degradation Detection During a Dynamic Loaded Beam Test.
In: CIC 2014: The 1st Concrete Innovation Conference, Oslo, Norway, 11-13 June 2014, [Online-Edition: http://resolver.tudelft.nl/uuid:8242a106-1224-4a53-8b88-7e07...],
[Conference or Workshop Item]

Martinelli, E. and Barros, J. A. O. and Etse, G. and Ferrara, L. and Folino, P. C. and Koenders, E. A. B. and Toledo Filho, R. D. (2014):
The EnCoRe project: an international network for sustainable concrete.
In: Revue Routes & Transports, Association québécoise des transports, pp. 57-61, [Online-Edition: http://resolver.tudelft.nl/uuid:3f0fc7bb-9452-4c78-9b03-7644...],
[Article]

Ukrainczyk, N. (2014):
Chemical Shrinkage During Hydration Reactions of Calcium Aluminate Cement.
In: Austin Journal Of Chemical Engineering, ISSN 2381-8905,
[Article]

Ukrainczyk, N. and Koenders, E. A. B. (2014):
Influence of microstructural parameters on effective diffusivity of hydrating cement paste.
In: RILEM International Symposium on Concrete Modelling - CONMOD 2014, RILEM Publications SARL, In: RILEM International Symposium on Concrete Modelling, Beijing, China, 12 - 14 October 2014, ISBN 978-2-35158-139-1,
[Online-Edition: http://www.rilem.org/gene/main.php?base=500218&id_publicatio...],
[Conference or Workshop Item]

Ukrainczyk, N. and Koenders, E. A. B. (2014):
3D Simulation of cement paste aging due to reactive transport.
In: RILEM International Symposium on Concrete Modelling, Beijing, China, 12 - 14 October 2014, [Online-Edition: http://www.rilem.org/gene/main.php?base=500218&id_publicatio...],
[Conference or Workshop Item]

Vrbos, N. and Ukrainczyk, N. and Šipušić, J. (2014):
polycarboxylate ether based superplasticiser for calcium aluminate cement mortars, calcium aluminates.
In: Calcium Aluminates: International Conference, Avignon, France, 18–21 May 2014, [Online-Edition: https://www.researchgate.net/profile/Neven_Ukrainczyk/public...],
[Conference or Workshop Item]

Schneider, Jens and Garrecht, Harald and Maier, Andreas and Gilka-Bötzow, Albrecht (2014):
Ein multifunktionales und energetisch aktives Fassadenelement aus Beton.
In: Bautechnik, pp. 167-174, 91, (3), ISSN 1437-0999,
[Online-Edition: http://onlinelibrary.wiley.com/doi/10.1002/bate.201400005/ab...],
[Article]

Ferrara, L. and Caggiano, A. and Krelani, V. and Etse, G. (2014):
Self-Healing Capacity of Cementitious Composites: Experiments and Modeling.
In: ISSN:1666-6070, In: Proceedings of the MECOM 2014, Mecánica Computacional Vol XXXIII, [Conference or Workshop Item]

Martinelli, E. and Caggiano, A. and Xargay, H. and Folino, P. C. (2014):
Studio sperimentale sulle proprietà meccaniche di calcestruzzi rinforzati con fibre metalliche riciclate.
In: ISBN 9788897385592, In: Atti del 20° Congresso C.T.E. Milano, Milano, Italy, 6.-8. Novembre 2014, [Conference or Workshop Item]

Folino, P. C. and Caggiano, A. and Martinelli, E. and Xargay, H. and Vega, V. (2014):
Hormaigón Con Agregados Reciclados Para Ser Utilizado Como Hormigón Estructural.
In: ISBN: 978-987-23292-2-8, In: 23 Jornadas Argentinas de Ingeniería Estructural, Buenos Aires, Argentina, 17.-19. September 2015, [Conference or Workshop Item]

Aquino, R. G. and Koleva, D. A. and Van Breugel, K. and Koenders, E. A. B. (2013):
Characterization of Portland cement paste using MIP, nanoindentation and esem techniques.
Japan Concrete Institute, In: ICCS 13: 1st International Conference on Concrete Sustainability, Tokyo, Japan, 27-29 May 2013, [Online-Edition: http://resolver.tudelft.nl/uuid:f756b1d0-496b-44fb-9c5d-e79b...],
[Conference or Workshop Item]

Miao, S. and Veerman, R. P. and Koenders, E. A. B. and Knobbe, A. (2013):
Modal analysis of a concrete highway bridge : structural calculations and vibration-based results.
In: Structural health monitoring for infrastructure sustainability: Proceedings of the 6th international Conference on Structural Health Monitoring of Intelligent Infrastructure SHMII-6, Hong-Kong (China), 9-11 Dec. 2013, The Hong Kong Polytechnic University, ISBN 978-962-367-768-4,
[Online-Edition: http://resolver.tudelft.nl/uuid:f223d1ee-dfe7-4884-b856-35a9...],
[Conference or Workshop Item]

Veerman, R. P. and Miao, S. and Koenders, E. A. B. and Knobbe, A. (2013):
Data-intensive structural health monitoring in the infrawatch project.
The Hong Kong Polytechnic University, In: 6th international Conference on Structural Health Monitoring of Intelligent Infrastructure SHMII-6, Hong-Kong, China, 9-11 Dec. 2013, ISBN 9789623677,
[Online-Edition: http://resolver.tudelft.nl/uuid:14c3d2a4-a931-41a4-a4e3-7f5f...],
[Conference or Workshop Item]

Hoornahad, H. and Koenders, E. A. B. (2013):
Effect of the mix composition on rheological behavior of a fresh granular-cement paste material.
In: 7th RILEM International Conference on Self-Compacting Concrete and 1st RILEM International Conference on Rheology and Processing of Construction Materials, Paris (France) 2-4 Sept., 2013, RILEM, In: 7th RILEM International Conference on Self-Compacting Concrete and 1st RILEM International Conference on Rheology and Processing of Construction Materials, Paris, France, 2-4 Sept., 2013, ISBN 978-2-35158-137-7,
[Online-Edition: http://resolver.tudelft.nl/uuid:5189b794-00af-4066-92b7-1fe4...],
[Conference or Workshop Item]

Toledo Filho, R. D. and Koenders, E. A. B. and Pepe, M. and Cordei, G. C. and Fairbairn, E. and Martinelli, E. (2013):
Rio 2016 sustainable construction commitments lead to new developments in recycled aggregate concrete.
In: Proceedings of the Institution of Civil Engineers: Civil Engineering, 166 (6), pp. 28-35, ISSN 0965-089X,
[Online-Edition: http://resolver.tudelft.nl/uuid:a5e0ba10-6c8d-43a3-94ba-0c30...],
[Article]

Hoornahad, H. and Koenders, E. A. B. (2013):
Simulation of macroscopic behavior of a self-compacting mixture based on DEM.
Iowa State University, In: SCC 5th North American Conference on the Design and Use of Self-Consolidating Concrete, Chicago, USA, May 12-15, 2013, [Online-Edition: http://resolver.tudelft.nl/uuid:cf5222ef-6711-4160-8ff1-c351...],
[Conference or Workshop Item]

Martinelli, E. and Koenders, E. A. B. and Caggiano, A. (2013):
Corrigendum to “A numerical recipe for modelling hydration and heat flow in hardening concrete”.
In: Cement and Concrete Composites, p. 86, 43, ISSN 09589465,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S095894651300102...],
[Article]

Lima, C. and Caggiano, A. and Faella, C. and Martinelli, E. and Pepe, M. and Realfonzo, R. (2013):
Physical properties and mechanical behaviour of concrete made with recycled aggregates and fly ash.
In: Construction and Building Materials, Amsterdam : Elsevier Science, pp. 547-559, 47, ISSN 0950-0618,
[Article]

Lottman, B. B. G. and Koenders, E. A. B. and Blom, C. B. M. and Walraven, J. C. (2013):
Spalling of concrete due to fire exposure: A coupled fracture mechanics and pore pressure approach.
EDP Sciences, In: MATEC Web of Conferences 6, 05002 (2013) Concrete Spalling due to Fire Exposure: Proceedings of the 3rd International Workshop, Paris, France, 25 - 27 September 2013, [Online-Edition: http://resolver.tudelft.nl/uuid:6ff0c121-56a4-4621-8943-f2f3...],
[Conference or Workshop Item]

Bacarji, E. and Toledo Filho, R. D. and Koenders, E. A. B. and Figueiredo, E. P. and Lopes, J. L. M. P. (2013):
Sustainability perspective of marble and granite residues as concrete fillers.
In: Construction and Building Materials, pp. 1-10, 45, ISSN 09500618,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S095006181300238...],
[Article]

Ukrainczyk, N. and Rogina, A. (2013):
Styrene–butadiene latex modified calcium aluminate cement mortar.
In: Cement and Concrete Composites, pp. 16-23, 41, ISSN 09589465,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S095894651300077...],
[Article]

Martinelli, E. and Koenders, E. A. B. and Caggiano, A. (2013):
A numerical recipe for modelling hydration and heat flow in hardening concrete.
In: Cement and Concrete Composites, pp. 48-58, 40, ISSN 09589465,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S095894651300051...],
[Article]

Martinelli, E. and Koenders, E. A. B. and Caggiano, A. (2013):
A numerical recipe for modelling hydration and heat flow in hardening concrete.
In: Cement and Concrete Composites, Barking, Essex : Elsevier, pp. 48-58, 40, ISSN 0958-9465,
[Article]

Ukrainczyk, N. and Šipušić, J. and Vrbos, N. (2013):
Compressive strength of calcium aluminate mortar determined by ultrasonic non-destructive test method.
In: Advances in Cement Research, pp. 143-154, 25, (3), ISSN 0951-7197, 1751-7605,
[Online-Edition: http://www.icevirtuallibrary.com/content/article/10.1680/adc...],
[Article]

Koenders, E. A. B. and Martinelli, E. and Pepe, M. and Caggiano, A. (2013):
A compressive strength model for recycled aggregate systems.
Japan Concrete Institute, In: ICCS 13: 1st International Conference on Concrete Sustainability, Tokyo, Japan, 27-29 May 2013, [Online-Edition: http://resolver.tudelft.nl/uuid:4dcbb56e-adcb-45d5-8600-520f...],
[Conference or Workshop Item]

Sisomphon, K. and Copuroglu, O. and Koenders, E. A. B. (2013):
Effect of exposure conditions on self healing behavior of strain hardening cementitious composites incorporating various cementitious materials.
In: Construction and Building Materials, pp. 217-224, 42, ISSN 09500618,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S095006181300075...],
[Article]

Ukrainczyk, N. and Zlopasa, J. and Koenders, E. A. B. (2013):
Hydration Process of Portland Cement Blended with Silica Fume.
In: Advanced Materials Research, pp. 578-583, 699, ISSN 1662-8985,
[Online-Edition: http://www.scientific.net/AMR.699.578],
[Article]

Ukrainczyk, N. and Koenders, E. A. B. and Van Breugel, K. (2013):
Numerical Algorithm for Pore Size Distribution Characterization of Materials from 3D Images.
In: Advanced Materials Research, pp. 584-589, 699, ISSN 1662-8985,
[Online-Edition: http://www.scientific.net/AMR.699.584],
[Article]

Veerman, R. P. and Koenders, E. A. B. (2013):
Understanding the impact of degradation of concrete structures.
IABSE, In: International IABSE Conference: Assessment, Upgrading and Refurbishment of Infrastructures, Rotterdam, The Netherlands, 6-8 May 2013, ISBN 9783857481,
[Online-Edition: http://resolver.tudelft.nl/uuid:1a4cc04a-b3b2-4b29-a796-1d70...],
[Conference or Workshop Item]

Ukrainczyk, N. and Koenders, E. A. B. and Van Breugel, K. (2013):
Simulation of pozzolan blended cement hydration.
Japan Concrete Institute, In: ICCS 13: 1st International Conference on Concrete Sustainability, Tokyo, Japan, 27-29 May 2013, [Online-Edition: http://resolver.tudelft.nl/uuid:fa932b3e-3b2b-49c2-90cc-bb34...],
[Conference or Workshop Item]

Caggiano, A. and Martinelli, E. (2013):
A fracture-based interface model for simulating the bond behaviour of FRP strips glued to a brittle substrate.
In: Composite structures : an international journal, pp. 397-403, 99, ISSN 0263-8223,
[Article]

Alexandrakis, E. and Lieberum, Karl-Heinz and Niwinski, T. and Gunkel, W. (2013):
Stoßartige Belastung an Befestigungen in Asphalt.
In: Annual journal on concrete and concrete structures (28), pp. 1-2, [Article]

Garrecht, H. and Gilka-Bötzow, A. (2013):
Mineralized foamed concrete acting compositely with thermally activated UHPC shells.
In: BFT International, pp. 118-120, ISSN 0373-4331,
[Article]

Zhang, Q. and Ye, G. and Koenders, E. A. B. (2013):
Investigation of the structure of heated Portland cement paste by using various techniques.
In: Construction and Building Materials, pp. 1040-1050, 38, ISSN 09500618,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S095006181200733...],
[Article]

Beck, M. and Gilka-Bötzow, A. (2013):
Energieeffizienzforschung in der ETA-Fabrik.
Darmstadt, Darmstadt, [Conference or Workshop Item]

Volland, S. and Vereshchagin, V. and Kazmina, O. and Dushkina, M. (2013):
Properties of lightweight aggregate produces from sand sludge.
In: GDCh-Monograph, 1st International Conference on the Chemistry of Construction Materials, pp. 411-414, 46, [Article]

Ukrainczyk, N. and Van Breugel, K. and Koenders, E. A. B. (2013):
Numerical model for multi-ion diffusion in cementitious materials - Multidiff code.
In: MATRIB 2013 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 19th - 21st June 2013, [Conference or Workshop Item]

Ukrainczyk, N. and Franković Mihelj, N. and Šipušić, J. (2013):
Calcium Sulfoaluminate Eco-Cement from Industrial Waste.
In: Chemical and Biochemical Engineering Quarterly, pp. 83-93, 27, (1), ISSN 0352-9568,
[Article]

Ukrainczyk, N. and Koenders, E. A. B. (2013):
Cementitious Sealing Material: 3D Digital Image Based Characterization of Pore Size Distribution and Modeling of Transport Properties.
In: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, Nantes, France, 9-14 June, [Conference or Workshop Item]

Ukrainczyk, N. and Vrbos, N. (2013):
Influence of citric acid on properties of calcium auminate cement based materials.
In: MATRIB 2013 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 27-29 June 2013, [Conference or Workshop Item]

Koenders, E. A. B. and Rocha, C. A. A. (2013):
Modeling Pozzolanic Systems for Subsurface Cementitious Systems.
In: ASME 2013 32nd International Conference on Ocean, Offshore and Arctic Engineering, Nantes, France, 9-14 June, [Online-Edition: https://www.researchgate.net/publication/267607455_Modeling_...],
[Conference or Workshop Item]

Alexandrakis, E. and Reeb, S. and Garrecht, H. (2013):
Feuchtemessung im Bauwesen mittels TDR.
In: Baustoff und Konstruktion, Springer-Verlag, pp. 299-309, [Book Section]

Ukrainczyk, N. (2013):
Surface impregnated concrete: A comparative study.
In: RILEM International workshop on performance-based specification and control of concrete durability, Zagreb, Coratia, 2013, [Conference or Workshop Item]

Franković-Mihelj, N. and Šipušić, J. and Ukrainczyk, N. (2013):
Kinetic study of calcium sulfoaluminate cement hydration.
In: MATRIB 2013 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 27-29 June 2013, [Conference or Workshop Item]

Martinelli, E. and Caggiano, A. and Xargay, H. and Folino, P. C. and Etse, G. and Hernan, A. C. (2013):
Numerical simulation of concrete beams reinforced with mixed recycled/industrial steel fibers.
In: Mecánica Computacional Vol XXXII, Mendoza, Argentina, 19.-22. November 2013, 32, [Conference or Workshop Item]

Martinelli, E. and Caggiano, A. (2013):
A novel numerical approach for modelling the monotonic and cyclic response of FRP strips glued to concrete.
In: ISBN 9783033040557, In: SMAR 2013, Istanbul, Istanbul, Turkey, September 2013, [Conference or Workshop Item]

Caggiano, A. and Martinelli, E. (2013):
Fracture-based interface formulation for FRP-to-concrete debonding mechanisms in mixed cracking mode.
In: FRPRCS11 Congress, Guimaraes, Portugal, 26.-28. June 2013, [Conference or Workshop Item]

Ripani, M. and Vrech, S. and Caggiano, A. and Etse, G. (2013):
Continuum-Based Modelling Of Recycled Aggregate Concrete.
In: Mecánica Computacional Vol XXXII, Mendoza, Argentina, 19.-22. Novembre 2013, 32, [Conference or Workshop Item]

Vrech, S. and Ripani, M. and Etse, G. and Caggiano, A. (2013):
Constitutive modeling for failure properties analysis of concrete with recycled aggregates.
In: ISBN: 9788890429279, In: 3rd Workshop "The new boundaries of structural concrete", Bergamo, Italy, 3.-4. October 2013, [Conference or Workshop Item]

Faella, C. and Caggiano, A. and Lima, C. and Martinelli, E. and Pepe, M. and Realfonzo, R. (2013):
The influence of the initial moisture conditions of coarse aggregates on the properties of RAC.
In: ISBN: 9788890429279, In: 3rd Workshop on "The New Boundaries of Structural Concrete", Bergamo, Italy, 3.- 4. October 2013, [Conference or Workshop Item]

Koenders, E. A. B. and Pepe, M. and Caggiano, A. and Martinelli, E. and Toledo Filho, R. D. (2013):
A compressive strength model for recycled aggregate systems.
Japan Concrete Institute, In: 1st International Conference on Concrete Sustainability, Tokyo, Tokyo, Japan, 27.-29. May 2013, [Conference or Workshop Item]

Gaitero, J. J. and Dolado, J. S. and Neuen, C. and Heber, F. and Koenders, E. A. B. (2012):
Computational 3D simulation of calcium leaching in cement matrices.
RILEM Publications SARL, In: Second International Conference on Microstructural-related Durability of Cementitious Composites, RILEM, Amsterdam, The Netherlands, 11-13 April 2012, ISBN 9782351581,
[Online-Edition: http://resolver.tudelft.nl/uuid:34eb65d5-09c4-4b95-8b9a-8e45...],
[Conference or Workshop Item]

Dado, E. and Koenders, E. A. B. and Carvalho, D. B. F. (2012):
Netcentric Virtual Laboratories for Composite Materials.
In: Composites and Their Properties, Intech, [Online-Edition: http://resolver.tudelft.nl/uuid:0c7829ab-af36-4257-9ddd-8337...],
[Book Section]

Caggiano, A. and Cremona, M. and Faella, C. and Lima, C. and Martinelli, E. (2012):
Fracture behavior of concrete beams reinforced with mixed long/short steel fibers.
In: Construction and Building Materials, Amsterdam : Elsevier Science, pp. 832-840, 37, ISSN 0950-0618,
[Article]

Caggiano, A. and Martinelli, E. (2012):
A unified formulation for simulating the bond behaviour of fibres in cementitious materials.
In: Materials & Design, Elsevier, pp. 204-213, 42, ISSN 0264-1275, 0261-3069,
[Article]

Ukrainczyk, N. and Koenders, E. A. B. (2012):
Numerical estimation of transport properties of cementitious materials using 3D digital images.
EDP Sciences, In: EPJ Web of Conferences 56, Cadarache, France, 12-15 November 2012, [Online-Edition: http://resolver.tudelft.nl/uuid:c5f37515-6ea4-489c-8dd0-59b5...],
[Conference or Workshop Item]

Caggiano, A. and Pepe, M. and Koenders, E. A. B. and Martinelli, E. (2012):
Numerical modeling of hydration process and temperature evolution in early age concrete.
Asociación Argentina de Mecánica Computacional, In: MECOM 2012: X Argentine Congress on Computational Mechanics, Salta, Argentina, 13-17 November 2012, [Online-Edition: http://resolver.tudelft.nl/uuid:f7de5641-e1c2-4ff4-9d9c-d189...],
[Conference or Workshop Item]

Caggiano, A. and Martinelli, E. and Faella, C. (2012):
A fully-analytical approach for modelling the response of FRP plates bonded to a brittle substrate.
In: International Journal of Solids and Structures, Elsevier, pp. 2291-2300, 49, (17), ISSN 0020-7683,
[Article]

Gilka-Bötzow, A.
Müller, H. S. and Haist, M. and Acosta, F. (eds.) (2012):
Influence of the microstructure of low density mineralized foams on their thermal conductivity.
Karlsruhe, KIT Scientific Publishing, In: Proceedings of the 9th fib International PhD Symposium in Civil Engineering : Karlsruhe Institute of Technology (KIT), Karlsruhe, ISBN 978-3-86644-858-2,
[Conference or Workshop Item]

Etse, G. and Caggiano, A. and Vrech, S. (2012):
Multiscale failure analysis of fiber reinforced concrete based on a discrete crack model.
In: International Journal of Fracture, pp. 131-146, 178, (1-2), ISSN 0376-9429,
[Article]

Schneider, J. and Eisele, J. and Garrecht, H. and Rinderknecht, Stephan and Ahsen, Anette von and Schiereck, D. and Kleuderlein, J. and Lang, F. and Gilka-Bötzow, Albrecht and Klein, M. and Schaede, Hendrik and Wien, A. and Bogs, C. (2012):
A New Concept for Energy-Plus-Houses and Their Facades.
In: Advanced Building Skins, Graz University of Technology, 14-15 Juni 2012, [Conference or Workshop Item]

Caggiano, A. and Etse, G. and Martinelli, E. (2012):
Zero-thickness interface model formulation for failure behavior of fiber-reinforced cementitious composites.
In: Computers & Structures, Elsevier, pp. 23-32, 98/99, ISSN 0045-7949, 0366-7138,
[Article]

Borgnakke, C. and Hansen, W. and Kang, Y. and Liu, Z. and Koenders, E. A. B. (2012):
Cryogenic suction pump mechanism for combined salt-and frost exposure.
In: Second International Conference on Microstructural-related Durability of Cementitious Composites, RILEM Proceedings pro083, 11-13 April, 2012, Amsterdam, The Netherlands, RILEM Publications, ISBN 978-2-35158-129-2,
[Online-Edition: http://resolver.tudelft.nl/uuid:ebc6e80e-3c9e-46a5-80be-c729...],
[Conference or Workshop Item]

Ukrainczyk, N. and Koenders, E. A. B. and Van Breugel, K. (2012):
Multicomponent modelling of Portland cement hydration reactions.
Rilem publications s.a.r.l., In: Second International Conference on Microstructural-related Durability of Cementitious Composites, RILEM, Amsterdam, The Netherlands, 11-13 April 2012, ISBN 9782351581,
[Online-Edition: http://resolver.tudelft.nl/uuid:dabadde8-3857-415b-af2a-ef65...],
[Conference or Workshop Item]

Koenders, E. A. B. and Ukrainczyk, N. and Hansen, W. (2012):
Micro-hydration, pore connectivity and durability of cementitious materials.
Rilem Publications s.a.r.l., In: Second International Conference on Microstructural-related Durability of Cementitious Composites, RILEM, Amsterdam, The Netherlands, 11-13 April 2012, ISBN 9782351581,
[Online-Edition: http://resolver.tudelft.nl/uuid:09a3c297-a1b0-4192-98b1-69ab...],
[Conference or Workshop Item]

Koenders, E. A. B. and Ukrainczyk, N. and Van Breugel, K. (2012):
Morphological nature of diffusion in cement paste.
In: 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, ICCRRR-3, 2012, [Conference or Workshop Item]

Alexandrakis, E. and Heck, A. and Renner, C. and Reeb, S. and Garrecht, H. (2012):
Energetische Sanierung und Überwachung am Beispiel eines historischen Strickbaus in Appenzell.
In: Annual journal on concrete and concrete structures (27), pp. 27-28, [Article]

Volland, S. and Vereshchagin, V. (2012):
Cellular glass ceramic materials on the basis of zeolitic rock.
In: Construction and Building Materials, pp. 940-946, 36, [Article]

Vereshchagin, V. and Volland, S. and Kazmina, O. (2012):
Entwicklung neuer Herstellungsverfahren von leichten glaskristallischen Materialien aus Primär-und Recyclingrohstoffen.
In: Darmstadt Concrete, pp. 25-26, Vol. 27, [Article]

Ukrainczyk, N. (2012):
Influence of metal chloride salts on calcium aluminate cement hydration.
In: Advances in cement research 24, 2012, (5), [Article]

Alexandrakis, E. and Reeb, S. and Garrecht, H. (2012):
Monitoring and energetic refurbishment by the example of a historic Strickbau in Appenzell.
NILU-Norwegian Institute of Air Research, In: 2nd European workshop on Cultural heritage preservation, Oslo, Norway, 24-26 September 2012, [Conference or Workshop Item]

Caggiano, A. and Pepe, M. and Koenders, E. A. B. and Martinelli, E. and Etse, G. (2012):
Numerical modeling of hydration process and temperature evolution in early age concrete.
In: ISSN:1666-6070, Asociación Argentina de Mecánica Computacional, In: Mecom 2012 - X Congreso Argentino de Mecánica Computacional, Salta, Argentina, 13.-16. November 2012, 31, [Conference or Workshop Item]

Caggiano, A. and Martinelli, E. and Faella, C. (2012):
A zero-thickness interface model for simulating the bond behaviour of FRP-strips glued on concrete.
CICE, In: CICE 2012, Rome, Italy, 13. -15. June 2012, [Conference or Workshop Item]

Etse, G. and Caggiano, A. and Vrech, S. (2012):
Constitutive microplane and interface laws for multiscale analysis of steel fiber reinforced concrete.
In: ECCOMAS 2012, Vienna, Austria, 10. - 14. September 2012, [Conference or Workshop Item]

Caggiano, A. and Cremona, M. and Faella, C. and Lima, C. and Martinelli, E. (2012):
Post-cracking characterisation of concrete beams reinforced with mixed long/short steel fibers.
In: ISBN: 9788890707834, In: Bond in Concrete 2012, Brescia, Italy, 17. - 20. June 2012, [Conference or Workshop Item]

Caggiano, A. and Martinelli, E. (2012):
Fracture-based model for mixed mode cracking of FRP strips glued on concrete.
In: ISBN: 9788890707834, In: Bond in Concrete 2012, Brescia, Italy, 17. - 20. June 2012, [Conference or Workshop Item]

Pepe, M. and Koenders, E. A. B. and Caggiano, A. and Lima, C. and Martinelli, E. (2012):
Sui processi di idratazione e le loro conseguenze sulle proprietà meccaniche di calcestruzzi con componenti riciclati.
In: ISBN: 9788890364792, In: 19th CTE 2012, 410, [Conference or Workshop Item]

Caggiano, A. and Faella, C. and Lima, C. and Martinelli, E. and Pepe, M. and Realfonzo, R. and Mele, M. and Pasqualini, A. and Valente, M. (2012):
Sul comportamento meccanico di calcestruzzi con aggregati riciclati e ceneri volanti.
In: ISBN: 9788890364792, In: 19th CTE 2012, 19, [Conference or Workshop Item]

Caggiano, A. and Vrech, S. and Etse, G. and Martinelli, E. (2012):
Elasto-plastic microplane model for fiber reinforced cementitious composites.
In: Mecom 2012 - X Congreso Argentino de Mecánica Computacional, Salta, Argentina, 13.-16. November 2012, [Conference or Workshop Item]

Morsy, M. I. N. (2011):
Properties of Rice Straw Cementitious Composite.
Darmstadt, Germany, TU Darmstadt, [Online-Edition: urn:nbn:de:tuda-tuprints-28473],
[Ph.D. Thesis]

Sabo, S. and Ukrainczyk, N. (2011):
Laboratory made differential calorimeter to study cement hydration.
In: International conference on materials, tribology, recycling, Vela Luka (Croatia), 29.06.-01.07.2011, [Conference or Workshop Item]

Sisomphon, K. and Koenders, E. A. B. and Copuroglu, O. (2011):
Surface crack self healing behaviour of mortars with expansive additives (abstract).
In: ICSHM 2011: Proceedings of the 3rd International Conference on Self-Healing Materials, Bath, UK, 27-29 June 2011, [Online-Edition: http://resolver.tudelft.nl/uuid:70c7ac79-d8d7-40dc-9ec1-4442...],
[Conference or Workshop Item]

Ukrainczyk, N. (2011):
An improved method for obtaining thermal diffusivity of foodstuffs.
In: Croatian Journal of Food Technology, Biotechnology and Nutrition, pp. 66-77, (6), [Article]

Van der Ham, H. W. M. (2011):
Microstructure and transport phenomena in visco-elastic modelling of hardening cementitious materials.
Technische Universität Delft, ISBN 978-94-6108-132-2,
[Online-Edition: http://resolver.tudelft.nl/uuid:24c3f698-376a-43c0-8240-bb27...],
[Ph.D. Thesis]

Gilka-Bötzow, A. and Garrecht, H. (2011):
Haufwerksporige Leichtbetone (LAC 2) mit minimierter Rohdichte - Gefügeoptimierung mit schaummodifizierten Zementleimen.
In: BFT International, pp. 116-119, ISSN 0373-4331,
[Article]

Caggiano, A. and Etse, G. and Martinelli, E. (2011):
Interface model for fracture behaviour of fiber-reinforced cementitious composites (FRCCs) Theoretical formulation and applications.
In: European journal of environmental and civil engineering, Taylor & Francis, pp. 1339-1359, 15, (9), ISSN 1964-8189; 2116-7214,
[Article]

Volokitin, G. G. and Skripnikova, N. K. and Volland, S. (2011):
Technology for producing mineral fibers by recycling ash-sludge and oil-shale wastes.
In: Glass and Ceramics, pp. 239-241, Vol. 68, [Article]

Ukrainczyk, N. (2011):
3D modeling of transport phenomenon in cement based materials.
In: MATRIB 2011 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 29. June - 1. July 2011, [Conference or Workshop Item]

Ukrainczyk, N. and Dabić, P. (2011):
Calcium Aluminate Cement Hydration Model.
In: Chemistry in Industry/Journal of Chemists and Chemical Engineers, pp. 1-10, (60), [Article]

Ukrainczyk, N. and Vrbos, N. (2011):
Effect of organic additives on hydration of aluminate cement.
In: MATRIB 2011 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 29. June - 1. July 2011, [Conference or Workshop Item]

Ukrainczyk, N. (2011):
Iron - Aluminium solid solution in Klein's compound.
In: 3rd International Symposium on Environmental Management, Zagreb, Coratia, 26-28 October 2011, [Conference or Workshop Item]

Ukrainczyk, N. and Dabić, P. (2011):
Model procesa hidratacije aluminatnog cementa.
In: Kemija u industriji (Chemistry in industry), pp. 1-10, 60, (1), ISSN 0022-9830,
[Online-Edition: http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=9...],
[Article]

Ukrainczyk, N. and Rogina, A. (2011):
SBR latex repair mortar properties.
In: MATRIB 2011 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 29. June - 1. July 2011, [Conference or Workshop Item]

Ukrainczyk, N. (2011):
Waste Phosphogypsum – Toward Sustainable Reuse in Calcium Sulfoaluminate Cement Based Building Materials.
In: Chemical and Biochemical Engineering Quarterly, pp. 26-28, ISSN 0352-9568,
[Article]

Alexandrakis, E. and Garrecht, H. (2011):
Feuchtelasten im historischen Mauerwerk – Untersuchung mittels TDR.
In: Annual journal on concrete and concrete structures (26), pp. 67-68, [Article]

Caggiano, A. and Etse, G. and Vrech, S. (2011):
Meso- and macroscopic models to simulate the mechanical behavior of fiber reinforced concrete members.
In: ISSN: 1666-6070, In: ENIEF 2011, Mecanica Computacional, Rosario, Argentina, 2. - 6. November 2011, 30, [Conference or Workshop Item]

Caggiano, A. and Martinelli, E. and Etse, G. (2011):
Bond behavior of FRP strips glued on concrete: a novel zero-thickness interface model.
In: ISSN:1666-6070, In: ENIEF 2011, Mecanica Computacional, Rosario, Argentina, 2. - 6. November 2011, 30, [Conference or Workshop Item]

Caggiano, A. and Etse, G. and Martinelli, E. (2011):
A novel meso-scopic model for simulating the mechanical behaviour of Fiber Reinforced Concrete Composites (FRCCs).
In: ISBN 9788890429224, In: The New Boundaries of Structural Concrete, 2011, Ancona, Italy, 15. - 16. September 2011, [Conference or Workshop Item]

Caggiano, A. and Lima, C. and Faella, C. and Martinelli, E. and Mele, M. and Pasqualini, A. and Realfonzo, R. and Valente, M. (2011):
Mechanical Behaviour of Concrete with Recycled Aggregate.
In: ISBN: 9788890429224, In: The New Boundaries of Structural Concrete, 2011, Ancona, Italy, 15. - 16. September 2011, [Conference or Workshop Item]

Gilka-Bötzow, A.
Breit, W. and Kurz, W. and Schnell, C. (eds.) (2010):
Mineralisierter Schaum.
Kaiserlautern, In: Beiträge zum 51. DAfStb Forschungskolloquium, Kaiserlautern, 2, [Conference or Workshop Item]

Ukrainczyk, N. (2010):
Kinetic modeling of calcium aluminate cement hydration.
In: Chemical Engineering Science, pp. 5605-5614, 65, (20), ISSN 00092509,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S000925091000479...],
[Article]

Gilka-Bötzow, A. and Heiduschke, A. and Haller, P. (2010):
Zur Abbrandrate von Holz in Abhängigkeit der Rohdichte.
In: European Journal of Wood and Wood Products, ISSN 0018-3768,
[Online-Edition: http://www.springerlink.com/content/36t8vg135l737g32/],
[Article]

Volland, S. (2010):
Entwicklung neuer Herstellungsverfahren von gebrannten porösen Materialien aus zeolithhaltigen Gesteinen.
In: Materialien zum wissenschaftlichen Seminar der Stipendiaten des „Michail Lomonosov“-Programms 2009/2010, Moskau, pp. 175-178, [Article]

Gilka-Bötzow, A. and Garrecht, H. (2010):
Wandfertigteile aus Leichtbeton - Ist die massive Bauweise mit der EnEV 2009 noch möglich?
In: BFT International, pp. 112-115, ISSN 0373-4331,
[Article]

Ukrainczyk, N. and Matusinovic, T. (2010):
Thermal properties of hydrating calcium aluminate cement pastes.
In: Cement and Concrete Research, pp. 128-136, 40, (1), ISSN 00088846,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S000888460900245...],
[Article]

Volland, S. and Vereshchagin, V. (2010):
Lightweight granular material from zeolite rocks with different additives.
In: Construction and Building Materials, pp. 625-629, 24, [Article]

Ukrainczyk, N. (2010):
Chemical shrinkage of hydrating calcium aluminate cement.
In: MATRIB 2010 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 23-25 June 2010, [Conference or Workshop Item]

Rogina, A. and Ukrainczyk, N. (2010):
Mechanical properties of SBR latex modified mortar.
In: MATRIB 2010 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 23-25 June 2010, [Conference or Workshop Item]

Ukrainczyk, N. and Rogina, A. (2010):
Setting time regulation of polymer modified calcium aluminate cement based materials.
In: MATRIB 2010 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 23-25 June 2010, [Conference or Workshop Item]

Ukrainczyk, N. and Kurajica, S. and Šipušić, J. (2010):
Thermophysical comparison of five commercial paraffin waxes as latent heat storage materials.
In: Chemical and Biochemical Engineering Quarterly Journal, pp. 129-137, (24), [Article]

Ukrainczyk, N. and Matusinovic, T. (2010):
Modeling of solid fraction evolution during calcium aluminate cement hydration.
In: International Conference On Material Science and 64th RILEM, Aache, Germany, September 2010, [Conference or Workshop Item]

Ukrainczyk, N. (2009):
Thermal diffusivity estimation using numerical inverse solution for 1D heat conduction.
In: International Journal of Heat and Mass Transfer, pp. 5675-5681, 52, (25-26), ISSN 00179310,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S001793100900486...],
[Article]

Ukrainczyk, N. (2009):
Determination of thermal conductivity by transient hot wire method.
In: MATRIB 2009 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 24-26 June 2009, [Conference or Workshop Item]

Ukrainczyk, N. (2009):
Influence of transition metal - chloride salts on cac hydration.
In: MATRIB 2009 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 24-26 June 2009, [Conference or Workshop Item]

Ukrainczyk, V. and Ukrainczyk, N. (2008):
A neural network method for analysing concrete durability.
In: Magazine of Concrete Research, pp. 475-486, 60, (7), ISSN 0024-9831, 1751-763X,
[Online-Edition: http://www.icevirtuallibrary.com/content/article/10.1680/mac...],
[Article]

Ukrainczyk, N. and Šipušić, J. (2008):
Microcalorimetric study on calcium aluminate cement hydration.
In: MATRIB 2008 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 26-28 June 2008, [Conference or Workshop Item]

Ukrainczyk, N. (2008):
Microstructural Model of Calcium Aluminate Cement Hydration.
In: Minerals To Materials International Conference- M2M08: Bridging the Gap between Minerals and Materials, Cairo, Egypt, 15-18 December 2008, [Conference or Workshop Item]

Ukrainczyk, N. and Matusinovic, T. and Kurajica, S. and Zimmermann, B. and Sipusic, J. (2007):
Dehydration of a layered double hydroxide—C2AH8.
In: Thermochimica Acta, pp. 7-15, 464, (1-2), ISSN 00406031,
[Online-Edition: http://linkinghub.elsevier.com/retrieve/pii/S004060310700314...],
[Article]

Ukrainczyk, N. and Banjad Pecur, I. and Bolf, N. (2007):
Evaluating rebar corrosion damage in RC structures exposed to marine environment using neural network.
In: Civil Engineering and Environmental Systems, pp. 15-32, 24, (1), ISSN 1028-6608, 1029-0249,
[Online-Edition: http://www.tandfonline.com/doi/abs/10.1080/10286600601024749],
[Article]

Rooij, M. R. and Koenders, E. A. B. and Dalen, S. M. (2006):
An experimental evaluation of the RCM-method.
In: Federation Internationale du Béton. Proceedings of the 2nd International Congress, June 5-8,2006, [Online-Edition: http://resolver.tudelft.nl/uuid:6b3a1424-9faa-4e6f-94c9-ec3f...],
[Conference or Workshop Item]

Ukrainczyk, N. and Ukrainczyk, M. (2006):
XRD and TGA investigation of hardened cement paste degradation.
In: MATRIB 2006 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 22-24 June 2006, [Conference or Workshop Item]

Ukrainczyk, N. and Matusinovic, T. (2005):
Comparison of neutral network durability models for reinforced concrete structures.
In: MATRIB 2005 International Conference on Materials, Tribology, Recycling, Vela Luka, Croatia, 5-8-June 2005, [Conference or Workshop Item]

Opatija, C. and Šipušić, J. (2005):
Nondestructive determination of compressive strength of calcium aluminate cement material.
In: International Conference MATEST 2005 NDT-Competence & Safety, Zagreb, Coratia, October 2005, [Conference or Workshop Item]

Ukrainczyk, N. and Pečur, I. B. (2004):
Application of neutral work in predicting damage of concrete structures caused by chlorides.
In: International Symposium on Durability and Maintenance of Concrete Structures, Dubrovnik, Croatia, 2004, [Conference or Workshop Item]

Koenders, E. A. B. and Walraven, J. C. (1997):
Simulation of Volume Changes in Hardening Cement-Based Materials.
Delft University Press, [Online-Edition: http://resolver.tudelft.nl/uuid:1dbcb7fb-3f8f-466b-8517-b223...],
[Ph.D. Thesis]

This list was generated on Sun Jul 21 01:47:22 2019 CEST.