2024

Kramat, Janice ; Kraus, Leon ; Gunawan, Vincent J. ; Smyej, Elias ; Froehlich, Philipp ; Weber, Tim E. ; Spiehl, Dieter ; Koeppl, Heinz ; Blaeser, Andreas ; Suess, Beatrix (2024)
Sensing levofloxacin with an RNA aptamer as a bioreceptor.
In: Biosensors, 14 (1)
doi: 10.3390/bios14010056
Artikel, Bibliographie

Lindner, Nils ; Mejia-Wille, Andres ; Fritschen, Anna ; Blaeser, Andreas (2024)
Development of a robotic-assisted handling and manipulation system for the high-scale bioproduction of 3D-bioprinted organ-on-a-chip devices.
In: HardwareX, 19
doi: 10.1016/j.ohx.2024.e00572
Artikel, Bibliographie

Fritschen, Anna ; Lindner, Nils ; Scholpp, Sebastian ; Richthof, Philipp ; Dietz, Jonas ; Linke, Philipp ; Guttenberg, Zeno ; Blaeser, Andreas (2024)
High-scale 3D-bioprinting platform for the automated production of vascularized organs-on-a-chip.
In: Advanced Healthcare Materials, 13 (17)
doi: 10.1002/adhm.202304028
Artikel, Bibliographie

Spiehl, Dieter ; Schwall, Gerhard ; Post, Fabian ; Weber, Carina ; Dörsam, Edgar ; Blaeser, Andreas ; Kempf, Volkhard A. J. ; Hogardt, Michael (2024)
Printed dry and ready-to-use in vitro diagnostic culture media devices for differentiation and antimicrobial susceptibility testing of bacteria.
In: Biosensors and Bioelectronics: X, 21
doi: 10.1016/j.biosx.2024.100557
Artikel, Bibliographie

2023

Holle, Eric ; Knödl, Felix ; Mayer, Martin ; Schneider, Tizian ; Spiehl, Dieter ; Blaeser, Andreas ; Dörsam, Edgar ; Schütze, Andreas (2023)
Control of ink-water balance in offset lithography by machine learning.
49th International Research Conference of Iarigai. Wuppertal (18.09. - 20.09.2023)
doi: 10.14622/Advances_49_2023_16
Konferenzveröffentlichung, Bibliographie

Euler, Thorsten ; Feldmann, Jakob ; Spiehl, Dieter ; Dörsam, Edgar ; Blaeser, Andreas (2023)
Cyanotype – from hand craft to industrial print.
49th International Research Conference of Iarigai. Wuppertal, Germany (18.09. - 20.09.2023)
doi: 10.14622/Advances_49_2023_09
Konferenzveröffentlichung, Bibliographie

Fritschen, Anna ; Acedo Mestre, Mariana ; Scholpp, Sebastian ; Blaeser, Andreas (2023)
Influence of the physico-chemical bioink composition on the printability and cell biological properties in 3D-bioprinting of a liver tumor cell line.
In: Frontiers in Bioengineering and Biotechnology, 11
doi: 10.3389/fbioe.2023.1093101
Artikel, Bibliographie

Knödl, Felix ; Sauer, Hans Martin ; Feldmann, Jakob ; Spiehl, Dieter ; Blaeser, Andreas ; Dörsam, Edgar (2023)
Investigation on an alternative printing plate for offset lithography.
49th International Research Conference of Iarigai. Wuppertal (18.09. - 20.09.2023)
doi: 10.14622/Advances_49_2023_15
Konferenzveröffentlichung, Bibliographie

Cichos, Simon ; Schätzlein, Eva ; Wiesmann-Imilowski, Nadine ; Blaeser, Andreas ; Henrich, Dirk ; Frank, Johannes ; Drees, Philipp ; Gercek, Erol ; Ritz, Ulrike (2023)
A new 3D-printed polylactic acid-bioglass composite for bone tissue engineering induces angiogenesis in vitro and in ovo.
In: International Journal of Bioprinting, 9 (5)
doi: 10.18063/ijb.751
Artikel, Bibliographie

2022

Brumm, Pauline ; Ciotta, Nicola ; Sauer, Hans Martin ; Blaeser, Andreas ; Doersam, Edgar (2022)
Python code: Classification of in situ high speed videos of the gravure printing fluid splitting process using deep learning.
doi: 10.48328/tudatalib-938
Anderes, Bibliographie

Feldmann, Jakob ; Spiehl, Dieter ; Dörsam, Edgar ; Blaeser, Andreas (2022)
Heightmap-based computing of the tool gap for additive manufacturing of paper embossing tools.
In: Journal of Print and Media Technology Research, 11 (3)
doi: 10.14622/JPMTR-2204
Artikel, Bibliographie

Wüst, Philipp ; Dohmen, Thomas S. ; Waal, Alexander ; Spiehl, Dieter ; Dörsam, Edgar ; Blaeser, Andreas ; Kabisch, Johannes (2022)
Use of Bacillus subtilis spores in printing and additive manufacturing as a robust, DNA-based anti-counterfeiting and identification feature: stresses, processing and evaluation.
In: Journal of Print and Media Technology Research, 11 (3)
doi: 10.14622/JPMTR-2114
Artikel, Bibliographie

Salg, Gabriel Alexander ; Blaeser, Andreas ; Gerhardus, Jamina Sofie ; Hackert, Thilo ; Kenngott, Hannes Goetz (2022)
Vascularization in Bioartificial Parenchymal Tissue: Bioink and Bioprinting Strategies.
In: International Journal of Molecular Sciences, 23 (15)
doi: 10.3390/ijms23158589
Artikel, Bibliographie

Schätzlein, Eva ; Blaeser, Andreas (2022)
Recent trends in bioartificial muscle engineering and their applications in cultured meat, biorobotic systems and biohybrid implants.
In: Communications Biology, 5 (1)
doi: 10.1038/s42003-022-03593-5
Artikel, Bibliographie

Brumm, Pauline ; Fritschen, Anna ; Doss, Lara ; Dörsam, Edgar ; Blaeser, Andreas (2022)
Fabrication of biomimetic networks using viscous fingering in flexographic printing.
In: Biomedical Materials, 17 (4)
doi: 10.1088/1748-605X/ac6b06
Artikel, Bibliographie

Wollschlaeger, Jannis O. ; Maatz, Robin ; Albrecht, Franziska B. ; Klatt, Annemarie ; Heine, Simon ; Blaeser, Andreas ; Kluger, Petra J. (2022)
Scaffolds for Cultured Meat on the Basis of Polysaccharide Hydrogels Enriched with Plant-Based Proteins.
In: Gels, 8 (2)
doi: 10.3390/gels8020094
Artikel, Bibliographie

Maatz, Robin ; Blaeser, Andreas
Hrsg.: Maatz, Robin (2022)
3D-BioScreenPrint: A novel bioprinting approach for high scale production of cultured meat-resembling multi-layered bioink sheets.
Materials for the European Green Deal: Materialinnovationen für klimaneutrale Ernährung und Landwirtschaft. Online (17.02.2022-17.02.2022)
doi: 10.26083/tuprints-00020710
Konferenzveröffentlichung, Erstveröffentlichung, Verlagsversion

Schätzlein, Eva ; Kicker, Christoph ; Söhling, Nicolas ; Ritz, Ulrike ; Neijhoft, Jonas ; Henrich, Dirk ; Frank, Johannes ; Marzi, Ingo ; Blaeser, Andreas (2022)
3D-printed PLA-bioglass scaffolds with controllable calcium release and MSC adhesion for bone tissue engineering.
In: Polymers, 14 (12)
doi: 10.3390/polym14122389
Artikel, Bibliographie

Brumm, Pauline ; Ciotta, Nicola ; Sauer, Hans Martin ; Blaeser, Andreas ; Dörsam, Edgar (2022)
Deep learning study of induced stochastic pattern formation in the gravure printing fluid splitting process.
In: Journal of Coatings Technology and Research
doi: 10.1007/s11998-022-00687-x
Artikel, Bibliographie

Euler, Thorsten ; Madzelan, Dawid ; Brumm, Pauline ; Dörsam, Edgar ; Blaeser, Andreas (2022)
Development and luminance measurements of a fully screen-printed multi-segmented electroluminescent clock.
48th International Research Conference of iarigai. Greenville, USA (19.09.2023-21.09.2023)
doi: 10.14622/Advances_48_2022_02
Konferenzveröffentlichung, Bibliographie

Feldmann, Jakob ; Braig, Felix ; Spiehl, Dieter ; Dörsam, Edgar ; Blaeser, Andreas (2022)
Generation of a paper embossing preview using 3D scanning and Fourier analysis.
doi: 10.14622/Advances_48_2022_19
Konferenzveröffentlichung, Bibliographie

Söhling, Nicolas ; Al Zoghool, Shahed ; Schätzlein, Eva ; Neijhoft, Jonas ; Costa Oliveira, Karla Mychellyne ; Leppik, Liudmila ; Ritz, Ulrike ; Dörsam, Edgar ; Frank, Johannes ; Marzi, Ingo ; Blaeser, Andreas ; Henrich, Dirk (2022)
In vitro evaluation of a 20% bioglass-containing 3D printable PLA composite for bone tissue engineering.
In: International Journal of Bioprinting, 8 (4)
doi: 10.18063/ijb.v8i4.602
Artikel, Bibliographie

Laumann, Daniel ; Spiehl, Dieter ; Dörsam, Edgar ; Blaeser, Andreas (2022)
Interaction of printing speed and temperature settings on the build plate adhesion of 3D-printed polylactide acid parts.
In: Journal of Adhesion
doi: 10.1080/00218464.2022.2093640
Artikel, Bibliographie

Fritschen, Anna ; Bell, Alena K. ; Königstein, Inga ; Stühn, Lukas ; Stark, Robert W. ; Blaeser, Andreas (2022)
Investigation and comparison of resin materials in transparent DLP-printing for application in cell culture and organs-on-a-chip.
In: Biomaterials Science, 10 (8)
doi: 10.1039/D1BM01794B
Artikel, Bibliographie

Caronna, Flavia ; Glimpel, Nikola ; Paar, Georg-Philipp ; Gries, Thomas ; Blaeser, Andreas ; Do, Khoa ; Dolan, Eimear B. ; Ronan, William (2022)
Manufacturing, characterization, and degradation of a poly(lactic acid) warp-knitted spacer fabric scaffold as a candidate for tissue engineering applications.
In: Biomaterials Science
doi: 10.1039/D1BM02027G
Artikel, Bibliographie

Bauer, Benedict ; Emonts, Caroline ; Bonten, Louisa ; Annan, Rokaya ; Merkord, Felix ; Vad, Thomas ; Idrissi, Akram ; Gries, Thomas ; Blaeser, Andreas (2022)
Melt-Spun, Cross-Section Modified Polycaprolactone Fibers for Use in Tendon and Ligament Tissue Engineering.
In: Fibers, 10 (3)
doi: 10.3390/fib10030023
Artikel, Bibliographie

Lindner, Nils ; Blaeser, Andreas (2022)
Scalable Biofabrication: A Perspective on the Current State and Future Potentials of Process Automation in 3D-Bioprinting Applications.
In: Frontiers in Bioengineering and Biotechnology, 10
doi: 10.3389/fbioe.2022.855042
Artikel, Bibliographie

Fritschen, Anna ; Bell, Alena ; Stühn, Lukas ; Königstein, Inga ; Stark, Robert ; Blaeser, Andreas
Hrsg.: European Society for Biomaterials (2022)
Stereolithography-based 3D-printing of transparent and biocompatible microfluidics for Organs-on-a-Chip applications.
31st Conference of the European Society for Biomaterials. Porto, Portugal (06.09.2021-06.09.2021)
doi: 10.26083/tuprints-00020402
Konferenzveröffentlichung, Erstveröffentlichung, Verlagsversion

Karakaya, Emine ; Bider, Faina ; Frank, Andreas ; Teßmar, Jörg ; Schöbel, Lisa ; Forster, Leonard ; Schrüfer, Stefan ; Schmidt, Hans-Werner ; Schubert, Dirk Wolfram ; Blaeser, Andreas ; Boccaccini, Aldo R. ; Detsch, Rainer (2022)
Targeted Printing of Cells: Evaluation of ADA-PEG Bioinks for Drop on Demand Approaches.
In: Gels, 8 (4)
doi: 10.3390/gels8040206
Artikel, Bibliographie

Salg, Gabriel A. ; Poisel, Eric ; Neulinger-Munoz, Matthias ; Gerhardus, Jamina ; Cebulla, Daniel ; Bludszuweit-Philipp, Catrin ; Vieira, Vitor ; Nickel, Felix ; Herr, Ingrid ; Blaeser, Andreas (2022)
Toward 3D-bioprinting of an endocrine pancreas: A building-block concept for bioartificial insulin-secreting tissue.
In: Journal of Tissue Engineering, 13
doi: 10.1177/20417314221091033
Artikel, Bibliographie

2021

Weber, Tim Eike ; Balles, Jacqueline ; Grohmann, Janice ; Dörsam, Edgar ; Süß, Beatrix ; Blaeser, Andreas (2021)
Development and characterization of an AuNP-based ink formulation for the fabrication of printed biosensors.
(01.09.2021-03.09.2021)
Konferenzveröffentlichung, Bibliographie

Fritschen, Anna ; Blaeser, Andreas (2021)
Biosynthetic, biomimetic, and self-assembled vascularized Organ-on-a-Chip systems.
In: Biomaterials, 268
doi: 10.1016/j.biomaterials.2020.120556
Artikel, Bibliographie

Duarte Campos, Daniela F. ; Blaeser, Andreas (2021)
3D-Bioprinting.
In: Basic Concepts on 3D Cell Culture
doi: 10.1007/978-3-030-66749-8_9
Buchkapitel, Bibliographie

2020

Balles, Jaqueline ; Reiners, Robert ; Spiehl, Dieter ; Dörsam, Edgar ; Blaeser, Andreas (2020)
Development and validation of a 3D-printed spectral verification system for colorimetric-based biosensors.
In: Journal of Print and Media Technology Research, 9 (4)
doi: 10.14622/JPMTR-2006
Artikel, Bibliographie

Li, Yaya ; Rehbock, Christoph ; Nachev, Milen ; Stamm, Jacqueline ; Sures, Bernd ; Blaeser, Andreas ; Barcikowski, Stephan (2020)
Matrix-specific mechanism of Fe ion release from laser-generated 3D-printable nanoparticle-polymer composites and their protein adsorption properties.
In: Nanotechnology, 31 (40)
doi: 10.1088/1361-6528/ab94da
Artikel, Bibliographie

Duarte Campos, Daniela F. ; Lindsay, Christopher D. ; Roth, Julien G. ; LeSavage, Bauer L. ; Seymour, Alexis J. ; Krajina, Brad A. ; Ribeiro, Ricardo ; Costa, Pedro F. ; Blaeser, Andreas ; Heilshorn, Sarah C. (2020)
Bioprinting Cell- and Spheroid-Laden Protein-Engineered Hydrogels as Tissue-on-Chip Platforms.
In: Frontiers in Bioengineering and Biotechnology, 8
doi: 10.3389/fbioe.2020.00374
Artikel, Bibliographie

Söhling, Nicolas ; Neijhoft, Jonas ; Nienhaus, Vinzenz ; Acker, Valentin ; Harbig, Jana ; Menz, Fabian ; Ochs, Joachim ; Verboket, René D. ; Ritz, Ulrike ; Blaeser, Andreas ; Dörsam, Edgar ; Frank, Johannes ; Marzi, Ingo ; Henrich, Dirk (2020)
3D-Printing of Hierarchically Designed and Osteoconductive Bone Tissue Engineering Scaffolds.
In: Materials, 13 (8)
doi: 10.3390/ma13081836
Artikel, Bibliographie

Schäfer, Benedikt ; Emonts, Caroline ; Glimpel, Nikola ; Ruhl, Tim ; Obrecht, Astrid S. ; Jockenhoevel, Stefan ; Gries, Thomas ; Beier, Justus P. ; Blaeser, Andreas (2020)
Warp-knitted spacer fabrics : a versatile platform to generate fiber-reinforced hydrogels for 3D tissue engineering.
In: Materials, 13 (16)
doi: 10.3390/ma13163518
Artikel, Bibliographie

2019

Štular, Danaja ; Kruse, Magnus ; Župunski, Vera ; Kreinest, Laura ; Medved, Jožef ; Gries, Thomas ; Blaeser, Andreas ; Jerman, Ivan ; Simončič, Barbara ; Tomšič, Brigita (2019)
Smart Stimuli-Responsive Polylactic Acid-Hydrogel Fibers Produced via Electrospinning.
In: Fibers and Polymers, 20
doi: 10.1007/s12221-019-9157-8
Artikel, Bibliographie

Duarte Campos, Daniela F. ; Zhang, Siyuan ; Kreimendahl, Franziska ; Köpf, Marius ; Fischer, Horst ; Vogt, Michael ; Blaeser, Andreas ; Esteves-Oliveira, Marcella (2019)
Hand-held bioprinting for de novo vascular formation applicable to dental pulp regeneration.
In: Connective Tissue Research, 61 (2)
doi: 10.1080/03008207.2019.1640217
Artikel, Bibliographie

Eickhoff, Roman M. ; Bolle, Tim ; Kossel, Klas ; Heise, Daniel ; Kroh, Andreas ; Lambertz, Andreas ; Blaeser, Andreas ; Gries, Thomas ; Jockenhoevel, Stefan ; Neumann, Ulf P. ; Klink, Christian D. (2019)
Improved biocompatibility of profiled sutures through lower macrophages adhesion.
In: Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 107 (6)
doi: 10.1002/jbm.b.34269
Artikel, Bibliographie

Blaeser, Andreas ; Heilshorn, Sarah C. ; Duarte Campos, Daniela F. (2019)
Smart Bioinks as de novo Building Blocks to Bioengineer Living Tissues.
In: Gels, 5 (2)
doi: 10.3390/gels5020029
Artikel, Bibliographie

Duarte Campos, Daniela F. ; Rohde, Malena ; Ross, Mitchell ; Anvari, Parham ; Blaeser, Andreas ; Vogt, Michael ; Panfil, Claudia ; Hin-Fai Yam, Gary ; Mehta, Jodhbir S. ; Fischer, Horst ; Walter, Peter ; Fuest, Matthias (2019)
Corneal Bioprinting Utilizing Collagen-Based Bioinks and Primary Human Keratocytes.
In: Journal of Biomedical Materials Research Part A, 107 (9)
doi: 10.1002/jbm.a.36702
Artikel, Bibliographie

Duarte Campos, Daniela F. ; Phillip, Midhun A. ; Gürzing, Stefanie ; Melcher, Christopher ; Lin, Ying Ying ; Schöneberg, Jan ; Blaeser, Andreas ; Theek, Benjamin ; Fischer, Horst ; Betsch, Marcel (2019)
Synchronized Dual Bioprinting of Bioinks and Biomaterial Inks as a Translational Strategy for Cartilage Tissue Engineering.
In: 3D Printing and Additive Manufacturing, 6 (2)
doi: 10.1089/3dp.2018.0123
Artikel, Bibliographie

Duarte Campos, Daniela F. ; Bonnin Marquez, Andrea ; O'Seanain, Cathal ; Fischer, Horst ; Blaeser, Andreas ; Vogt, Michael ; Corallo, Diana ; Aveic, Sanja (2019)
Exploring Cancer Cell Behavior In Vitro in Three-Dimensional Multicellular Bioprintable Collagen-Based Hydrogels.
In: Cancers, 11 (2)
doi: 10.3390/cancers11020180
Artikel, Bibliographie

2018

Paar, Georg-Philipp ; Reitzenstein, Peter ; Molano-López, Catalina ; Pich, Andrij ; Gries, Thomas ; Jockenhoevel, Stefan ; Blaeser, Andreas (2018)
Incorporation of microgels in PLA monofilaments by wet spinning.
Venedig (Italien) (23.10.2018-25.10.2018)
Konferenzveröffentlichung, Bibliographie

Betsch, Marcel ; Cristian, Catalin ; Lin, Ying Ying ; Blaeser, Andreas ; Schöneberg, Jan ; Vogt, Michael ; Buhl, Eva Miriam ; Fischer, Horst ; Duarte Campos, Daniela F. (2018)
Incorporating 4D into Bioprinting: Real‐Time Magnetically Directed Collagen Fiber Alignment for Generating Complex Multilayered Tissues.
In: Advanced Healthcare Materials, 7 (21)
doi: 10.1002/adhm.201800894
Artikel, Bibliographie

Idrissi, Akram ; Granich, Dominik ; Gries, Thomas ; Blaeser, Andreas (2018)
Development of a textile-integrated, multimodal sensor device for biosignal aquisition.
In: Biomedical Engineering/Biomedizinische Technik, 63 (s1)
doi: 10.1515/bmt-2018-6051
Artikel, Bibliographie

Sen, Kshama S. ; Duarte Campos, Daniela F. ; Köpf, Marius ; Blaeser, Andreas ; Fischer, Horst (2018)
The Effect of Addition of Calcium Phosphate Particles to Hydrogel‐Based Composite Materials on Stiffness and Differentiation of Mesenchymal Stromal Cells toward Osteogenesis.
In: Advanced Healthcare Materials, 7 (18)
doi: 10.1002/adhm.201800343
Artikel, Bibliographie

Kossel, Klas-Moritz ; Handel, Marina ; Hornef, Mathias Walter ; Klinge, Uwe ; Gerhardts, Anja ; Gries, Thomas ; Blaeser, Andreas (2018)
Investigation of fiber-based Influences on Bacterial Adherence.
The Fiber Society Spring Conference. Tokio (Japan) (12.06.2018-14.06.2018)
Konferenzveröffentlichung, Bibliographie

Idrissi, Akram ; Kaiser, Malte ; Albrecht, Simon ; Richert, Sebastian ; Gries, Thomas ; Blaeser, Andreas (2018)
Development of a test bench for the characterization of movement artifacts in smart textile systems.
Aachen (Germany) (23.05.2018-25.05.2018)
doi: 10.18154/RWTH-CONV-224931
Konferenzveröffentlichung, Bibliographie

Goetzke, Roman ; Franzen, Julia ; Ostrowska, Alina ; Vogt, Michael ; Blaeser, Andreas ; Klein, Gerd ; Rath, Björn ; Fischer, Horst ; Zenke, Martin ; Wagner, Wolfgang (2018)
Does Soft Really Matter? Differentiation of Induced Pluripotent Stem Cells Into Mesenchymal Stromal Cells Is Not Influenced by Soft Hydrogels.
In: Biomaterials, 156
doi: 10.1016/j.biomaterials.2017.11.035
Artikel, Bibliographie

Glimpel, Nikola ; Bolle, Tim ; Gries, Thomas ; Blaeser, Andreas (2018)
Bewegung in die Arthrosebehandlung bringen : Abstandsgewirke als Gewebeersatz in der Transplantationsmedizin.
In: Kettenwirk-Praxis: KWP / Deutsche Ausgabe, 52 (4)
Artikel, Bibliographie

Betsch, Marcel ; Christian, Catalin ; Lin, Ying-Ying ; Blaeser, Andreas ; Schoeneberg, Jan ; Vogt, Michael ; Fischer, Horst ; Duarte Campos, Daniela F. (2018)
Bioprinting articular cartilage substitutes by biomimetic real-time magnetic orientation of collagen fibers.
Deutscher Kongress für Orthopädie und Unfallchirurgie. Berlin (Germany) (23.10.2018-26.10.2018)
doi: 10.3205/18dkou695
Konferenzveröffentlichung, Bibliographie

Blaeser, Andreas (2018)
Tropfen für Tropfen zum 3D-gedruckten Organ.
In: NMWP-Magazin – Magazin für Nanotechnologie, Mikrosystemtechnik, Neue Werkstoffe und Photonik, 01
Artikel, Bibliographie

2017

Kreimendahl, Franziska ; Köpf, Marius ; Thiebes, Anja Lena ; Duarte Campos, Daniela F. ; Blaeser, Andreas ; Schmitz-Rhode, Thomas ; Apel, Christian ; Jockenhoevel, Stefan ; Fischer, Horst (2017)
Three-Dimensional Printing and Angiogenesis: Tailored Agarose-Type I Collagen Blends Comprise Three-Dimensional Printability and Angiogenesis Potential for Tissue-Engineered Substitutes.
In: Tissue Engineering Part C: Methods, 23 (10)
doi: 10.1089/ten.tec.2017.0234
Artikel, Bibliographie

Blaeser, Andreas (2017)
Verfahren zum Herstellen einer dreidimensionalen biologischen Struktur und diese Struktur so erhaltend.
Norm, Patent, Standard, Bibliographie

Stratesteffen, Henrike ; Köpf, Marius ; Kreimendahl, Franziska ; Blaeser, Andreas ; Jockenhoevel, Stefan ; Fischer, Horst (2017)
GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis.
In: Biofabrication, 9 (4)
doi: 10.1088/1758-5090/aa857c
Artikel, Bibliographie

Forget, Aurelien ; Blaeser, Andreas ; Miessmer, Florian ; Köpf, Marius ; Duarte Campos, Daniela F. ; Voelcker, Nicolas H. ; Blencowe, Anton ; Fischer, Horst ; Shastri, V. Prasad (2017)
Mechanically Tunable Bioink for 3D Bioprinting of Human Cells.
In: Advanced Healthcare Materials, 6 (20)
doi: 10.1002/adhm.201700255
Artikel, Bibliographie

Blaeser, Andreas ; Duarte Campos, Daniela F. ; Fischer, Horst (2017)
3D bioprinting of cell-laden hydrogels for advanced tissue engineering.
In: Current Opinion in Biomedical Engineering, 2
doi: 10.1016/j.cobme.2017.04.003
Artikel, Bibliographie

2016

Zhou, Bei ; Heider, Yousef ; Blaeser, Andreas ; Raith, Stefan ; Fischer, Horst ; Markert, Bernd (2016)
Simulation of the gelation process of hydrogel droplets in 3D bioprinting.
In: PAMM Special Issue: Joint 87th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM) and Deutsche Mathematiker‐Vereinigung (DMV), 16 (1)
doi: 10.1002/pamm.201610047
Artikel, Bibliographie

Blaeser, Andreas ; Million, Nina ; Duarte Campos, Daniela F. ; Gamrad, Lisa ; Köpf, Marius ; Rehbock, Christoph ; Nachev, Milen ; Sures, Bernd ; Barcikowski, Stephan ; Fischer, Horst (2016)
Laser-based in situ embedding of metal nanoparticles into bioextruded alginate hydrogel tubes enhances human endothelial cell adhesion.
In: Nano Research, 9 (11)
doi: 10.1007/s12274-016-1218-3
Artikel, Bibliographie

Duarte Campos, Daniela F. ; Blaeser, Andreas ; Buellesbach, Kate ; Sen, Kshama S. ; Xun, Weiwei ; Tillmann, Walter ; Fischer, Horst (2016)
Bioprinting Organotypic Hydrogels with Improved Mesenchymal Stem Cell Remodeling and Mineralization Properties for Bone Tissue Engineering.
In: Advanced Healthcare Materials, 5 (11)
doi: 10.1002/adhm.201501033
Artikel, Bibliographie

Köpf, Marius ; Duarte Campos, Daniela F. ; Blaeser, Andreas ; Sen, Kshama S. ; Fischer, Horst (2016)
A tailored three-dimensionally printable agarose–collagen blend allows encapsulation, spreading, and attachment of human umbilical artery smooth muscle cells.
In: Biofabrication, 8 (2)
doi: 10.1088/1758-5090/8/2/025011
Artikel, Bibliographie

Blaeser, Andreas ; Duarte Campos, Daniela F. ; Puster, Uta ; Richtering, Walter ; Stevens, Molly M. ; Fischer, Horst (2016)
Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity.
In: Advanced Healthcare Materials, 5 (3)
doi: 10.1002/adhm.201500677
Artikel, Bibliographie

Torres-Rendon, Jose Guillermo ; Köpf, Marius ; Gehlen, David ; Blaeser, Andreas ; Fischer, Horst ; Laporte, Laura de ; Walther, Andreas (2016)
Cellulose Nanofibril Hydrogel Tubes as Sacrificial Templates for Freestanding Tubular Cell Constructs.
In: Biomacromolecules, 17 (3)
doi: 10.1021/acs.biomac.5b01593
Artikel, Bibliographie

2014

Duarte Campos, Daniela F. ; Blaeser, Andreas ; Korsten, Anne ; Neuss, Sabine ; Jäkel, Jörg ; Vogt, Michael ; Fischer, Horst (2014)
The Stiffness and Structure of Three-Dimensional Printed Hydrogels Direct the Differentiation of Mesenchymal Stromal Cells Toward Adipogenic and Osteogenic Lineages.
In: Tissue Engineering Part A, 21 (3-4)
doi: 10.1089/ten.tea.2014.0231
Artikel, Bibliographie

2013

Blaeser, Andreas ; Duarte Campos, Daniela F. ; Weber, Michael ; Neuss, Sabine ; Theek, Benjamin ; Fischer, Horst ; Jahnen-Dechent, Willi (2013)
Biofabrication Under Fluorocarbon: A Novel Freeform Fabrication Technique to Generate High Aspect Ratio Tissue-Engineered Constructs.
In: Bioresearch Open Access, 2 (5)
doi: 10.1089/biores.2013.0031
Artikel, Bibliographie

Duarte Campos, Daniela F. ; Blaeser, Andreas ; Weber, Michael ; Jäkel, Jörg ; Jahnen-Dechent, Wilhelm ; Fischer, Horst ; Neuss, Sabine (2013)
Three-dimensional printing of stem cell-laden hydrogels submerged in a hydrophobic high-density fluid.
In: Biofabrication, 5 (1)
doi: 10.1088/1758-5082/5/1/015003
Artikel, Bibliographie