2024

Valizadeh, Iman ; Weeger, Oliver (2024)
Rate-dependent energy dissipation of graded viscoelastic structures fabricated by grayscale vat photopolymerization.
In: Smart Materials and Structures, 33 (6)
doi: 10.1088/1361-665X/ad442a
Artikel, Bibliographie

Valizadeh, Iman (2024)
Additive Manufacturing, Experimental Characterization, and Constitutive Modeling of Functionally Graded Polymeric Structures.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00026756
Dissertation, Erstveröffentlichung, Verlagsversion

Schäfer, Kilian ; Lutzi, Matthias ; Khan, Muhammad Bilal ; Schäfer, Lukas ; Dirba, Imants ; Bruns, Sebastian ; Valizadeh, Iman ; Weeger, Oliver ; Hartmann, Claas ; Kupnik, Mario ; Adabifiroozjaei, Esmaeil ; Molina-Luna, Leopoldo ; Skokov, Konstantin P. ; Gutfleisch, Oliver (2024)
Magneto-active composites with locally tailored stiffness produced by laser powder bed fusion.
In: Additive Manufacturing, 79
doi: 10.1016/j.addma.2023.103905
Artikel, Bibliographie

2023

Klein, Dominik K. ; Roth, Fabian J. ; Valizadeh, Iman ; Weeger, Oliver (2023)
Parametrized polyconvex hyperelasticity with physics-augmented neural networks.
In: Data-Centric Engineering, 4
doi: 10.1017/dce.2023.21
Artikel, Bibliographie

Shojaee, Mohammad ; Valizadeh, Iman ; Klein, Dominik K. ; Sharifi, Peyman ; Weeger, Oliver (2023)
Multiscale modeling of functionally graded shell lattice metamaterials for additive manufacturing.
In: Engineering with Computers
doi: 10.1007/s00366-023-01906-8
Artikel, Bibliographie

Valizadeh, Iman ; Tayyarian, Tannaz ; Weeger, Oliver (2023)
Influence of process parameters on geometric and elasto-visco-plastic material properties in vat photopolymerization.
In: Additive Manufacturing, 72
doi: 10.1016/j.addma.2023.103641
Artikel, Bibliographie

Schäfer, Kilian ; Lutzi, Matthias ; Khan, Muhammad Bilal ; Schäfer, Lukas ; Skokov, Konstantin P. ; Dirba, Imants ; Bruns, Sebastian ; Valizadeh, Iman ; Weeger, Oliver ; Hartmann, Claas ; Kupnik, Mario ; Adabifiroozjaei, Esmaeil ; Molina-Luna, Leopoldo ; Gutfleisch, Oliver (2023)
Local stiffness tailoring of magneto-active composites produced by laser powder bed fusion.
doi: 10.48550/arXiv.2305.02643
Artikel, Bibliographie

2022

Weeger, Oliver ; Valizadeh, Iman ; Mistry, Yash ; Bhate, Dhruv (2022)
Inelastic finite deformation beam modeling, simulation, and validation of additively manufactured lattice structures.
In: Additive Manufacturing Letters, 4
doi: 10.1016/j.addlet.2022.100111
Artikel, Bibliographie

Valizadeh, Iman ; Weeger, Oliver (2022)
Parametric visco-hyperelastic constitutive modeling of functionally graded 3D printed polymers.
In: International Journal of Mechanical Sciences, 226
doi: 10.1016/j.ijmecsci.2022.107335
Artikel, Bibliographie

2021

Valizadeh, Iman ; Aboud, Ahmad Al ; Dörsam, Edgar ; Weeger, Oliver (2021)
Tailoring of functionally graded hyperelastic materials via grayscale mask stereolithography 3D printing.
In: Additive Manufacturing, 47
doi: 10.1016/j.addma.2021.102108
Artikel, Bibliographie

Seyedpour, Seyed Morteza ; Valizadeh, Iman ; Kirmizakis, Panagiotis ; Doherty, Rory ; Ricken, Tim (2021)
Optimization of the Groundwater Remediation Process Using a Coupled Genetic Algorithm-Finite Difference Method.
In: Water, 13 (3)
doi: 10.3390/w13030383
Artikel, Bibliographie

2020

Valizadeh, Iman ; Weeger, Oliver (2020)
Nonlinear multiscale simulation of instabilities due to growth of an elastic film on a microstructured substrate.
In: Archive of Applied Mechanics, 90 (11)
doi: 10.1007/s00419-020-01728-w
Artikel, Bibliographie

2018

Valizadeh, Iman ; Steinmann, Paul ; Javili, Ali (2018)
Growth-induced instabilities of an elastic film on a viscoelastic substrate: analytical solution and computational approach via eigenvalue analysis.
In: Journal of Mechanics of Materials and Structures, 13 (4)
doi: 10.2140/jomms.2018.13.571
Artikel, Bibliographie