TU Darmstadt / ULB / TUbiblio

Browse by Person

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Date | Language
Number of items: 26.

Fiedler, Udo and Sahm, Alexander (2003):
On the cutting edge of high speed machining.
[Other]

Sahm, Alexander (2003):
Prognose der Schnittkräfte bei der HSC-Bearbeitung.
Aachen, Shaker, TU Darmstadt, ISBN 3-8322-1633-2,
[Ph.D. Thesis]

Fiedler, Udo and Sahm, Alexander (2003):
An den Grenzen der Hochgeschwindigkeitsbearbeitung : ein Blick über den Tellerrand.
[Other]

Abele, Eberhard and Schulz, Herbert and Sahm, Alexander (2002):
Einfluss von hochharten Schneidstoffen auf den Zerspanprozess.
In: Hartstoffe : Seminarunterlagen, Darmstadt, Deutsche Gesellschaft für Materialkunde e.V., In: Hartstoffe, Darmstadt, 2.-4. April 2002, [Conference or Workshop Item]

Sahm, Alexander and Abele, Eberhard and Schulz, Herbert (2002):
State of the art in CGI machining.
In: Proceedings of the Compacted Graphite Iron Machining Workshop, Darmstadt, In: CGI Machining Workshop, Darmstadt, March 13-14, 2002, [Conference or Workshop Item]

Sahm, Alexander and Schulz, Herbert and Abele, Eberhard Cebalo, Roko and Schulz, Herbert (eds.) (2002):
Basic investigations and solutions for CGI machining.
In: CIM 2002: Computer integrated manufacturing and high speed machining, Zagreb, HUPS, In: 8th International Scientific Conference on Production Engineering, Brijuni, Croatia, June 13-14, 2002, pp. 1.141-1.152, ISBN 9539718147,
[Conference or Workshop Item]

Schulz, Herbert and Sahm, Alexander (2002):
Influence of heat treatment and cutting parameters on chip formation and cutting forces in high-speed machining.
In: Production Engineering : WGP, 9. Springer Verlag, pp. 17-20, ISSN 0944-6524,
[Article]

Schulz, Herbert and Sahm, Alexander Schulz, Herbert (ed.) (2002):
Influence of heat treatments and cutting parameters on chip formation and cutting forces.
In: Metal cutting and high speed machining, New York, Kluwer Acad./Plenum Pr., pp. 69-78, [Book Section]

Abele, Eberhard and Schulz, Herbert and Sahm, Alexander (2002):
Machining of compacted graphite iron.
In: Materialwissenschaft und Werkzeugtechnik, [Article]

Koppka, Frank and Sahm, Alexander (2002):
Magnesiumzerspanung auf dem Vormarsch.
In: Werkstatt und Betrieb, 135pp. 14-20, [Article]

Abele, Eberhard and Schulz, Herbert and Sahm, Alexander and Versch, Alexander (2002):
Sensoren für Prozesssicherheit.
In: Werkstatt + Betrieb : WB, (4), 135. Carl Hanser Verlag, pp. 54-56, ISSN 0043-2792,
[Article]

Abele, Eberhard and Sahm, Alexander and Schulz, Herbert (2002):
Wear mechanism in machining Compacted Graphite Iron.
In: CIRP Annals, (1), 51. Elsevier, pp. 53-56, ISSN 0007-8506,
DOI: 10.1016/S0007-8506(07)61464-4,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S000785060...],
[Article]

Schulz, Herbert and Abele, Eberhard and Sahm, Alexander (2001):
High-Speed-Machining - fundamentals and industrial application.
In: Anais do 6º Seminário Internacional de Alta Tecnologia - Manufatura Avançada, Piracicaba (Brasilien), In: UNIMEP: Seminario de Alta Tecnologia, Manufatura Avancada, Piracicaba (Brasilien), October, pp. 25-55, [Conference or Workshop Item]

Schulz, Herbert and Stoic, A. and Sahm, Alexander (2001):
Improvement of cutting process in accordance with process disturbances.
In: Computer integrated manufacturing and high speed machining, Zagreb, Croatian Association of Production Engineering, In: Cim 2001: 7th International Scientific Conference on Production Engineering, Lumbarda, Croatia, 14.-15.6.2001, pp. 1.123-1.132, ISBN 9539718139,
[Conference or Workshop Item]

Sahm, Alexander and Siems, S. (2001):
Influence of chip segmentation on cutting force.
In: Scientific fundamentals of HSC. - München: Hanser, 2001, München, Hanser, [Book Section]

Schulz, Herbert and Sahm, Alexander (2001):
Influence of heat treatment and cutting parameters on chip formation and cutting forces in high speed machining.
In: Metal cutting and high speed machining, Metz, École Nationale d'Ingenieurs, In: Third International Conference on Metal Cutting and High Speed Machining, Metz, June, 2001, pp. 69-78, [Conference or Workshop Item]

Schulz, Herbert and Abele, Eberhard and Sahm, Alexander (2001):
Materials aspects of chip formation in HSC machining.
In: CIRP Annals - Manufacturing Technology, (1), 50. Elsevier, pp. 45-48, ISSN 0007-8506,
DOI: 10.1016/S0007-8506(07)62067-8,
[Online-Edition: https://www.sciencedirect.com/science/article/pii/S000785060...],
[Article]

Schulz, Herbert and Abele, Eberhard and Sahm, Alexander (2001):
Technologie des Hochgeschwindigkeitsfräsens.
In: Seminarunterlagen zu "Hochleistungsverfahren für die rationelle Fertigung" : VDI-Bildungswerk, Dresden, In: Hochleistungsverfahren für die rationelle Fertigung, Dresden, 10.-11. Mai 2001, [Conference or Workshop Item]

Reuter, Ulrich and Sahm, Alexander and Schulz, Herbert (2000):
CGI production on transfer lines and machining centres.
In: Tagungsband Compacted Graphite Iron Machining Workshop, Darmstadt, Techn. Univ., PTW, In: CGI Machining Workshop, Darmstadt, 2. November 2000, [Conference or Workshop Item]

Reuter, Ulrich and Sahm, Alexander and Schulz, Herbert and Heck, M. and Ortner, H. and Konetschny, C. (2000):
The wear process of CGI cutting and machining developments.
In: Tagungsband Compacted Graphite Iron Machining Workshop, Darmstadt, Techn. Univ., In: CGI Machining Workshop, Darmstadt, 2. November 2000, [Conference or Workshop Item]

Blümke, Ralf and Sahm, Alexander and Siems, S. and Müller, C. and Exner, H. E. and Schulz, Herbert and Warnecke, G. (2000):
Charakterisierung der Spanbildung bei Kurzzeitbelastung während des Hochgeschwindigkeitsfräsens.
In: Spanen metallischer Werkstoffe mit hohen Geschwindigkeiten, Bonn, Deutsche Forschungsgemeinschaft, pp. 23-35, [Book Section]

Dörr, Joachim and Sahm, Alexander (1999):
Erfahrungen mit Minimalmengen-Schmierung.
In: Werkstatt und Betrieb, 132. Carl Hanser Verlag, pp. 38-48, ISSN 0043-2792,
[Article]

Sahm, Alexander and Reuter, Ulrich (1999):
Magnesium spanend bearbeiten.
In: Werkstatt und Betrieb, 132. Carl Hanser Verlag, pp. 56-67, ISSN 0043-2792,
[Article]

Sahm, Alexander (1999):
Neue Konzepte zur Komplettbearbeitung.
In: Werkstatt und Betrieb, 132pp. 30-38, [Article]

Sahm, Alexander (1999):
PC prägt die CNC-Architektur.
In: Werkstatt und Betrieb, 132pp. 58-63, [Article]

Schulz, Herbert and Stanik, Markus and Sahm, Alexander (1999):
Unterschiede direkter und indirekter Meßsysteme an Vorschubachsen von Werkzeugmaschinen.
In: wt Werkstattstechnik, (6), 89. Springer-VDI-Verlag, pp. 315-318, [Article]

This list was generated on Sat Sep 19 01:39:55 2020 CEST.