TU Darmstadt / ULB / TUbiblio

Browse by Person

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: No Grouping | Item Type | Date | Language
Number of items: 16.

Heck, Martin and Ortner, Hugo M. and Flege, Stefan and Reuter, U. and Ensinger, Wolfgang :
Analytical investigations concerning the wear behaviour of cutting tools used for the machining of compacted graphite iron and grey cast iron.
[Online-Edition: http://dx.doi.org/10.1016/j.ijrmhm.2007.05.003]
In: International Journal of Refractory Metals and Hard Materials, 26 (3) pp. 197-206. ISSN 02634368
[Article] , (2008)

Schulz, Herbert and Reuter, U. :
Gusseisen mit Vermikulargraphit prozessicher bearbeiten.
In: Maschinenmarkt S. 68-72.
[Article] , (2001)

Schulz, Herbert and Reuter, U. :
Verschleißmechanismus geklärt: GGV-Motoren reif für die Großserie.
In: Werkstatt und Betrieb, 134 S. 80-82.
[Article] , (2001)

Schulz, Herbert and Reuter, U. :
Wirtschaftliche GGV-Zerspanung.
In: Werkstatt und Betrieb, 134 S. 24-26.
[Article] , (2001)

Schulz, Herbert and Reuter, U. :
Wear mechanism for the high speed machining of CGI.
In: Production engineering: WGP annals, 7 S. 13-16.
[Article] , (2000)

Gastel, Michael and Konetschny, Christoph and Reuter, U. and Fasel, Claudia and Schulz, Herbert and Riedel, Ralf and Ortner, Hugo M. :
Investigation of the wear mechanism of cubic boron nitride tools used for the machining of compacted graphite iron and grey cast iron.
In: Journal of refractory metals & hard materials, 18 (6) pp. 287-296.
[Article] , (2000)

Schulz, Herbert and Reuter, U. :
Basic investigation of CGI machining.
In: Compacted Graphite Iron: Design and Machining Workshop <1999, Livonia, Michigan>: Proceedings .
[Conference or Workshop Item] , (1999)

Schulz, Herbert and Reuter, U. :
CGI Machinability and developments towards production.
In: Compacted Graphite Iron: Design and Machining Workshop <1999, Bad Nauheim>: Proceedings .
[Conference or Workshop Item] , (1999)

Schulz, Herbert and Reuter, U. and McDonald, M. :
Compact and bijou - the problems associated with CGI can be overcome.
In: Engine technology international 58 ff..
[Article] , (1999)

Schulz, Herbert and Reuter, U. :
Economic machining of Compacted Graphite Iron (CGI).
In: International German and French Conference on High Speed Machining <2, 1999, Darmstadt>: Proceedings. S. 175-184 .
[Conference or Workshop Item] , (1999)

Sahm, Alexander and Reuter, U. :
Magnesium spanend bearbeiten.
In: Werkstatt und Betrieb, 132 pp. 56-67.
[Article] , (1999)

Schulz, Herbert and Gastel, M. and Reuter, U. and Ortner, H. M. :
SIMS analysis of the wear of boron nitride tools for the machining of cpmacted graphite iron and grey cast iron.
In: Fresenius Journal of analytical chemistry, 365 pp. 142-146.
[Article] , (1999)

Schulz, Herbert and Reuter, U. and Konetschny, C. and Gastel, M. and McDonald, M. :
Wear mechanisms in highspeed machining of compacted graphite iron.
In: Compacted Graphite Iron: Design and Machining Workshop <1999, Bad Nauheim>: Proceedings .
[Conference or Workshop Item] , (1999)

Gastel, Michael and Reuter, U. and Schulz, Herbert and Ortner, H. M. :
SIMS Analysis of the wear of boron nitride tools for the machining of compacted graphite iron and grey cast iron.
In: Fresenius Journal of Analytical Chemistry, 365 (1-3) pp. 142-146. ISSN 0937-0633
[Article] , (1999)

Schmidt, Th. and Esser-Schmittmann, W. and Roosen, P. and Hassel, E. and Reuter, U. and Scheid, E. :
Pressure Chamber Experiments for Fuel Spray Model Development.
In: Technical Report EN3E-0102-D, Commission of the European Communities and Non-Nuclear Energy R+D Program
[Conference or Workshop Item] , (1988)

Scheid, E. and Pischinger, F. and Knoche, K. and Daams, H. and Hassel, E. and Reuter, U. :
Spray Combustion Chamber with Optical Access, Ignition Zone Visualization and First Raman Measurements of Lacal Air-Fuel Ratio.
In: SAE transactions, 95 (6)
[Article] , (1986)

This list was generated on Tue May 21 02:11:37 2019 CEST.