2019

De Witte, Dennis ; Fehlhaber, Thomas (2019):
3D-Clay Printing - Next generation Brickwork.
In: Ceramic Forum International, 96 (4-5/2019), pp. E54-E58. Göller Verlag GmbH, ISSN 01739913,
[Article]

2018

De Witte, Dennis (2018):
3D-Druck von Tonkeramik für Freiformfassaden.
In: Fassade, 2018 (5), p. 29. Verlagsanstalt Handwerk GmbH, ISSN 0941-7796,
[Article]

De Witte, Dennis ; Klijn-Chevalerias, M. L. de ; Loonen, R. C. G. M. ; Hensen, J. L. M. ; Knaack, Ulrich ; Zimmermann, Gregor
Bakker, Siebe 4TU.Bouw (eds.) (2018):
Convective Concrete.
In: Research to reality, pp. 80-83, Delft, TU Delft Open, ISBN 9789463661041,
[Book Section]

Borg Costanzi, Christopher ; De Witte, Dennis ; Akerboom, Robert (2018):
New Material systems for 3D printing.
In: RuMoer, 69 (2018), pp. 39-47. ISSN 1567-7699,
[Article]

2017

Cruz, P. J. S. ; Knaack, Ulrich ; Figueiredo, B. ; De Witte, Dennis (2017):
Ceramic 3D printing: The future of brick architecture.
In: Proceedings of the IASS Annual Symposia, pp. 1-10,
Hamburg, International Association for Shell and Spatial Structures (IASS), IASS 2017 Hamburg Symposium: Digital Technologies for Spatial Structures, Hamburg, Germany, 25-28 September 2017, [Conference or Workshop Item]

Klijn-Chevalerias, M. L. de ; Loonen, R. C. G. M. ; Zarzycka, A. ; De Witte, Dennis ; Sarakinioti, M. V. ; Hensen, J. L. M.
Turrin, Michela ; Peters, Brady ; O'Brien, Wiliam ; Stouffs, Rudi ; Dogan, Timur (eds.) (2017):
Assisting the development of innovative responsive facade elements using building performance simulation.
In: Proceedings of the Symposium on Simulation for Architecture and Urban Design, pp. 243-250,
San Diego, CA, USA, The Society for Modeling and Simulation International, SimAUD 2017, Toronto, ONT, Canada, 22.05.2017 - 24.05.2017, ISBN 978-1-5108-7018-5,
DOI: 10.22360/simaud.2017.simaud.027,
[Conference or Workshop Item]

De Witte, Dennis ; Klijn-Chevalerias, M. L. de ; Loonen, R. C. G. M. ; Hensen, J. L. M. ; Knaack, Ulrich ; Zimmermann, G. (2017):
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design & Engineering, 5 (1), pp. 107-117. TU Delft Open, ISSN 2213-3038,
DOI: 10.7480/jfde.2017.1.1430,
[Article]

De Witte, Dennis ; Klijn-Chevalerias, M. L. de (2017):
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
p. 319, PowerSkin Conference - Munich, Germany, München, 19.01.2017, [Conference or Workshop Item]

Knaack, Ulrich ; Mohsen, Alamir ; De Witte, Dennis (2017):
Concepts and samples for force and function optimisation of steel knots and ceramic wall components.
Deutscher Verband fur Materialforschung und – prüfung, [Conference or Workshop Item]

De Witte, Dennis ; Klijn-Chevalerias, M. L. de ; Loonen, R. C. G. M. ; Hensen, J. L. M. ; Knaack, Ulrich ; Zimmermann, G. (2017):
Convective Concrete - Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design and Engineering,, 5 (1), pp. 107-117. [Article]

2016

Knaack, Ulrich ; Tessmann, Oliver ; Bilow, Marcel ; De Witte, Dennis ; Mohsen, Alamir (2016):
Imagine 10 – Rapids 02.
Rotterdam, Nai010 Publ, ISBN 9462082936,
[Book]

De Witte, Dennis ; Knaack, Ulrich (2016):
„RAM“ Material Xperience.
3 TU.Bouw center of excellence for the built environment, Rotterdam, 29.01.2016, [Conference or Workshop Item]

De Witte, Dennis ; Knaack, Ulrich ; Mohsen, Alamir ; Tessmann, Oliver ; Bilow, Marcel
Knaack, Ulrich ; Klein, Tillmann ; Bilow, Marcel (eds.) (2016):
Rapids 2.0.
In: Imagine, 10, Rotterdam, nai010 uitgevers, ISBN 9789462082939,
[Book]

Knaack, Ulrich ; De Witte, Dennis (2016):
Real Additive Manufacturing.
In: 3TU.Bouw center of excellence for the built environment, pp. o.A.. [Article]

2015

De Witte, Dennis (2015):
Concrete in an AM process: Freeform concrete processing.
Delft, TU Delft, [Master Thesis]