TU Darmstadt / ULB / TUbiblio

Blättern nach Person

Ebene hoch
Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Gruppiere nach: Keine Gruppierung | Typ des Eintrags | Publikationsjahr | Sprache
Anzahl der Einträge: 84.

Koenders, E. A. B. ; Ukrainczyk, N. ; Caggiano, A. ; Gilka-Bötzow, A.
Hrsg.: Lange, Jörg ; Rädel, F. (2018)
Werkstoffinnovationen im Bauwesen.
In: Festschrift Jörg Lange
Buchkapitel, Bibliographie

Schicchi, D. S. ; Caggiano, A. ; Hunkel, Martin ; Koenders, E. A. B. (2018)
Thermodynamically consistent multiscale formulation of a thermo-mechanical problem with phase transformations.
In: Continuum Mechanics and Thermodynamics
doi: 10.1007/s00161-018-0682-2
Artikel, Bibliographie

Caggiano, A. ; Schicchi, D. S. ; Mankel, C. ; Ukrainczyk, N. ; Koenders, E. A. B. (2018)
A mesoscale approach for modeling capillary water absorption and transport phenomena in cementitious materials.
In: Computers & Structures, 200
doi: 10.1016/j.compstruc.2018.01.013
Artikel, Bibliographie

Koenders, E. A. B. ; Gilka-Bötzow, A. ; Caggiano, A. ; Ukrainczyk, N.
Hrsg.: Pahn, Matthias ; Thiele, Catherina ; Glock, Christian (2018)
Energy Efficiency as a Driver for Materials Innovations.
In: Vielfalt im Massivbau – Festschrift zum 65. Geburtstag von Prof. Dr.-Ing. Jürgen Schnell
Buchkapitel, Bibliographie

Xargay, H. ; Folino, P. ; Nuñez, N. ; Gómez, M. ; Caggiano, A. ; Martinelli, E. (2018)
Acoustic Emission behavior of thermally damaged Self-Compacting High Strength Fiber Reinforced Concrete.
In: Construction and Building Materials, (187)
Artikel, Bibliographie

Koenders, E. A. B. ; Gilka-Bötzow, A. ; Caggiano, A. ; Ukrainczyk, N. (2018)
Energy Efficiency as a driver for materials innovations.
In: VIELFALT IM MASSIVBAU, Festschrift zum 65. Geburstag von Prof. Dr.-Ing. Jürgen Schnell
Buchkapitel, Bibliographie

Caggiano, A. ; Schicchi, D. S. ; Etse, G. ; Ripani, M. (2018)
Meso-scale response of concrete under high temperature based on coupled thermo-mechanical and pore-pressure interface modeling.
In: Engineering Failure Analysis, (85)
Artikel, Bibliographie

Mankel, C. ; Caggiano, A. ; Yang, S. ; Ukrainczyk, N. ; Koenders, E. A. B. (2018)
Micro-scale Thermal Simulations of Cement Pastes Containing Microencapsulated Phase Change Materials (MPCM).
Symposium on Concrete Modelling – CONMOD2018. Delft (27 -30 August 2018)
Konferenzveröffentlichung, Bibliographie

Harenberg, S. ; Caggiano, A. ; Koenig, A. ; Said, D. ; Gilka-Bötzow, A. ; Schultz-Cornelius, M. ; Yang, S. ; Pahn, M. ; Dehn, F. ; Koenders, E. A. B. (2018)
Micromechanical behavior of UHPC under cyclic bending-tensile loading in consideration of the influence of the concrete edge zone.
89th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM). München (19.-23.03.2018)
Konferenzveröffentlichung, Bibliographie

Koenders, E. A. B. ; Ukrainczyk, N. ; Caggiano, A. (2018)
Modelling the Self-Healing Portential of Dissoluble Encapsulated Cement.
6th European Conference on Computational Mechanics (ECCM 6), 7th Conference on Computational Fluid Dynamics (EFCD 7). Glasgow, UK (11.-15.06.2018)
Konferenzveröffentlichung, Bibliographie

Koenders, E. A. B. ; Ukrainczyk, N. ; Caggiano, A. (2018)
Modelling the Self-Healing potential of dissoluble encapsulated cement.
6th European Conference on Computational Mechanics (ECCM 6) and the 7th European Conference on Computational Fluid Dynamics (ECFD 7). (11.06 - 15.06.2018)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Lima, C. ; Pepe, M. ; Caggiano, A. ; Faella, C. (2018)
Post-Cracking Response of Hybrid Recycled/Industrial Steel Fiber-Reinforced Concrete.
In: ACI Special Publication, (326)
Artikel, Bibliographie

Benedetto, M. F. ; Caggiano, A. ; Etse, G. (2018)
Virtual elements and zero thickness interface-based approach for fracture analysis of heterogeneous materials.
In: Computer Methods in Applied Mechanics and Engineering, (338)
Artikel, Bibliographie

Caggiano, A. ; Martinelli, E. ; Schicchi, D. S. ; Etse, G. (2018)
A modified Duvaut-Lions zero-thickness interface model for simulating the rate-dependent bond behavior of FRP-concrete joints.
In: Composites Part B: Engineering, (149)
Artikel, Bibliographie

Caggiano, A. ; Barros, J. A. O. ; Etse, G. (2017)
Advanced Numerical Models for the Analysis of Sustainable FRC Structures.
In: Recent Advances on Green Concrete for Structural Purposes
doi: 10.1007/978-3-319-56797-6_12
Buchkapitel, Bibliographie

Barros, J. A. O. ; Frazão, Carlos ; Caggiano, A. ; Folino, P. C. ; Martinelli, E. ; Xargay, H. ; Zamanzadeh, Z. ; Lourenço, L. (2017)
Cementitious Composites Reinforced with Recycled Fibres.
In: Recent Advances on Green Concrete for Structural Purposes
doi: 10.1007/978-3-319-56797-6_8
Buchkapitel, Bibliographie

Caggiano, A. ; Etse, G. ; Folino, P. C. ; Ripani, M. ; Vrech, S. (2017)
Constitutive Formulations for Concrete with Recycled Aggregates.
In: Recent Advances on Green Concrete for Structural Purposes
doi: 10.1007/978-3-319-56797-6_5
Buchkapitel, Bibliographie

Martinelli, E. ; Caggiano, A. (2017)
Numerical Simulation of the Fatigue Behaviour of FRO Strips Glued to a Brittle Substrate.
9th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Berkeley, California USA (29.05-01.06.2016)
Konferenzveröffentlichung, Bibliographie

Etse, G. ; Caggiano, A. (2017)
Degradation of Concrete Mechanical Behavior due to Temperature Effects.
IEEE-IAS/PCA Cement Industry, Technical Conference. IEEE Industry Applications Society.. (21.05.2017 - 25.05.2017)
doi: 10.1109/CITCON.2017.7951845
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Pepe, M. ; Lima, C. ; Folino, P. C. ; Martinelli, E. (2017)
Experimental Characterization of the Post-Cracking Response in Hybrid Recycled/Industrial Steel Fiber-Reinforced Concrete.
Advances in Construction Materials Systems.
Konferenzveröffentlichung, Bibliographie

Schicchi, D. S. ; Caggiano, A. ; Benito, S. ; Hoffmann, F. (2017)
Mesoscale fracture of a bearing steel: A discrete crack approach on static and quenching problems.
In: Theoretical and Applied Fracture Mechanics
doi: 10.1016/j.tafmec.2017.04.006
Artikel, Bibliographie

Mankel, C. ; Caggiano, A. ; Ukrainczyk, N. ; Koenders, E. A. B.
Hrsg.: Sonzogni, Victorio ; Storti, Mario (2017)
Micro-Scale Thermal Analysis of Energy Storage in Cement-Based Composites Containing Phase Change Materials (PCMS).
XXIII Congreso sobre Métodos Numéricos y sus Aplicaciones. La Plata (7.-10.11.2017)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Folino, P. C. ; Lima, C. ; Martinelli, E. ; Pepe, M. (2017)
On the mechanical response of Hybrid Fiber Reinforced Concrete with Recycled and Industrial Steel Fibers.
In: Construction and Building Materials, (147)
Artikel, Bibliographie

Schicchi, D. S. ; Caggiano, A. ; Lübben, T. ; Hunkel, Martin (2017)
On the mesoscale fracture initiation criterion of heterogeneous steels during quenching.
In: Material Performance and Characteristics, (6)
Artikel, Bibliographie

Caggiano, A. ; Etse, G. ; Ferrara, L. ; Krelani, V. (2017)
Zero-thickness interface constitutive theory for concrete self-healing effects.
In: Computers & Structures, (186)
Artikel, Bibliographie

Caggiano, A. ; Gambarelli, S. ; Martinelli, E. ; Nisticò, N. ; Pepe, M. (2016)
Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete.
In: Construction and Building Materials, 125
Artikel, Bibliographie

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2016)
Fracture-based interface model for FRP NSM systems in concrete.
In: Composite structures : an international journal, 152
Artikel, Bibliographie

Vrech, Sonia ; Etse, G. ; Caggiano, A. (2016)
Thermodynamically consistent elasto-plastic microplane formulation for fiber reinforced concrete.
In: International Journal of Solids and Structures, 81
Artikel, Bibliographie

Etse, G. ; Schicchi, D. S. ; Caggiano, A. ; Ripani, M. (2016)
Discontinuos Approach for Meso-Scale Modeling of Porous Materials like Concrete under High Temperature.
9th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Berkeley, California USA (29.05-01.06.2016)
Konferenzveröffentlichung, Bibliographie

Ferrara, L. ; Caggiano, A. ; Luzio, G. ; Etse, G. ; Gettu, R. ; Krelani, V. ; Rocha Ferreira, S. ; Roig Flores, M. ; Serna, P. ; Toledo Filho, R. D. (2016)
Five Years of International Collaborative Research on Self-Healing Capacity of Cementitious Composites.
fib Symposium 2016 - the International Federation for Structural Engineering. Cape Town, South Africa (21-23 November 2016)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Xargay, H. ; Galladini, D. ; Vistos, L. ; Folino, P. C. ; Martinelli, E. (2016)
Hormigon reforzado con fibras de acero industriales y recicladas: analisis experimental del comportamiento mecanico.
24º Jornadas Argentinas de Ingeniería Estructural. Buenos Aires (28.-30. September 2016)
Konferenzveröffentlichung, Bibliographie

Galladini, D. ; Vistos, L. ; Caggiano, A. ; Etse, G. (2016)
Hormigon reforzado con fibras de acero industriales y recicladas: reglas de diseño para uso estructural.
24º Jornadas Argentinas de Ingeniería Estructural. Buenos Aires (28.-30. September 2016)
Konferenzveröffentlichung, Bibliographie

Vistos, L. ; Galladini, D. ; Xargay, H. ; Caggiano, A. ; Folino, P. C. ; Martinelli, E. (2016)
Hybrid Industrial/Recycled SFRC: Experimental Analysis and Design.
Italian Concrete Days 2016 - Giornate aicap e Congresso C.T.E.. Rom - Italy (27-29 OTTOBRE 2016)
Konferenzveröffentlichung, Bibliographie

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2016)
Lei constitutiva para a simulacão da ligacão de sistemas NSM FRP no betão.
Encontro Nacional BETÃO ESTRUTURAL. DEC - Universidade de Coimbra (2 a 4 de novembro de 2016)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Schicchi, D. S. ; Etse, G. ; Martinelli, E. (2016)
Meso-Scale Modeling of Hybrid Industrial/Recycled Steel Fiber-Reinforced Concrete.
ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece (5–10 June 2016)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Schicchi, D. S. ; Martinelli, E. ; Etse, G. (2016)
Meso-scale simulation of the post-cracking behaviour of hybrid industrial/recycled steel fibre-reinforced concrete.
4th Workshop on New Boundaries of Structural Concrete. Capri Island - Italy (September 29-October 1 2016)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2016)
Numerical Modelling of Debonding and Fatigue of FRP Strips Glued to Concrete.
INTERNATIONAL WORK SHOP ON RC FRP SEISMIC RETROFITTING. Lyon - France (19-20 September 2016)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2016)
Structural Response of FRP-to-Concrete Joints under Cyclic Actions: Fracture Mechanics and Fatigue Analysis.
8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016). Hong Kong, China (14-16 December 2016)
Konferenzveröffentlichung, Bibliographie

Vistos, L. ; Caggiano, A. ; Martinelli, E. ; Folino, P. C. (2016)
The incidence of concrete quality on buckling analysis of slender columns.
4th Workshop on New Boundaries of Structural Concrete. Capri Island - Italy (September 29-October 1 2016)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. ; Xargay, H. (2015)
An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete.
In: Construction and Building Materials, 94
Artikel, Bibliographie

Etse, G. ; Ripani, M. ; Caggiano, A. ; Schicchi, D. S. (2015)
Strength and durability of concrete subjected to high temperature: continuous and discrete constitutive approaches.
In: ACI Special Publication, 305
Artikel, Bibliographie

Caggiano, A. ; Xargay, H. ; Folino, P. C. ; Martinelli, E. (2015)
Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices.
In: Cement and Concrete Composites, 62
Artikel, Bibliographie

Caggiano, A. ; Etse, G. (2015)
Coupled thermo-mechanical interface model for concrete failure analysis under high temperature.
In: Computer methods in applied mechanics and engineering, 289
Artikel, Bibliographie

Schicchi, D. S. ; Caggiano, A. (2015)
A porous-based discontinuous model for ductile fracture in metals.
In: Engineering Fracture Mechanics, 138
Artikel, Bibliographie

Caggiano, A. ; Schicchi, D. S. (2015)
A thermo-mechanical interface model for simulating the bond behaviour of FRP strips glued to concrete substrates exposed to elevated temperature.
In: Engineering Structures, 83
Artikel, Bibliographie

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2015)
Comparação entre modelos constitutivos de interface: abordagem total versus abordagem com plasticidade,.
SPREB-FRP 2015 Proceedings, UM Guimarães, 2015.
Konferenzveröffentlichung, Bibliographie

Vrech, S. ; Caggiano, A. ; Etse, G. (2015)
Continuous Microplane Theory and Interface Approach for Failure Form Analysis of Steel Fiber Reinforced Concrete.
1st Pan-American Congress on Computational Mechanics - PANACM 2015 & MECOM 2015. Buenos Aires, Argentina (27.-29. April 2015)
Konferenzveröffentlichung, Bibliographie

Xargay, H. ; Caggiano, A. ; Folino, P. C. ; Lima, C. ; Martinelli, E. (2015)
Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete: Pull-out behaviour and post-cracking flexural strength (Extented abstract).
COMAT 2015 VI International Conference on Science and Technology of Composite Materials. Buenos Aires, Argentina (7.-8. May 2015)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2015)
Modelling the cyclic response of FRP strips glued to a brittle substrate.
SMAR 2015 Antalya. Third Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures.. Antalya, Turkey (7.-9. September 2015)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Krelani, V. ; Ferrara, L. ; Etse, G. (2015)
Zero-Thickness Interface Formulation For Fracture Analysis Of Self-Healing Concrete.
1st Pan-American Congress on Computational Mechanics - PANACM 2015 - MECOM 2015. Buenos Aires, Argentina (27.-29. April 2015)
Konferenzveröffentlichung, Bibliographie

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2015)
A comparison between interface constitutive models: Total approach versus plasticity approach.
The 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015) Joint Conference. Nanjing, China (14.-16. Dezember 2015)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2014)
A unified theoretical model for the monotonic and cyclic response of FRP strips glued to concrete.
In: Polymers, 6 (2)
Artikel, Bibliographie

Folino, P. C. ; Caggiano, A. ; Martinelli, E. ; Xargay, H. ; Vega, V. (2014)
Hormaigón Con Agregados Reciclados Para Ser Utilizado Como Hormigón Estructural.
23 Jornadas Argentinas de Ingeniería Estructural. Buenos Aires, Argentina (17.-19. September 2015)
Konferenzveröffentlichung, Bibliographie

Ferrara, L. ; Caggiano, A. ; Krelani, V. ; Etse, G. (2014)
Self-Healing Capacity of Cementitious Composites: Experiments and Modeling.
Proceedings of the MECOM 2014, Mecánica Computacional Vol XXXIII.
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. ; Xargay, H. ; Folino, P. C. (2014)
Studio sperimentale sulle proprietà meccaniche di calcestruzzi rinforzati con fibre metalliche riciclate.
Atti del 20° Congresso C.T.E. Milano. Milano, Italy (6.-8. Novembre 2014)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Koenders, E. A. B. ; Caggiano, A. (2013)
Corrigendum to “A numerical recipe for modelling hydration and heat flow in hardening concrete”.
In: Cement and Concrete Composites, 43
Artikel, Bibliographie

Lima, C. ; Caggiano, A. ; Faella, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. (2013)
Physical properties and mechanical behaviour of concrete made with recycled aggregates and fly ash.
In: Construction and Building Materials, 47
Artikel, Bibliographie

Martinelli, E. ; Koenders, E. A. B. ; Caggiano, A. (2013)
A numerical recipe for modelling hydration and heat flow in hardening concrete.
In: Cement and Concrete Composites, 40
doi: 10.1016/j.cemconcomp.2013.04.004
Artikel, Bibliographie

Koenders, E. A. B. ; Pepe, M. ; Caggiano, A. ; Martinelli, E. ; Toledo Filho, R. D. (2013)
A compressive strength model for recycled aggregate systems.
ICCS 13: 1st International Conference on Concrete Sustainability. Tokyo, Japan (27.-29. May 2013)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. (2013)
A fracture-based interface model for simulating the bond behaviour of FRP strips glued to a brittle substrate.
In: Composite structures : an international journal, 99
Artikel, Bibliographie

Vrech, S. ; Ripani, M. ; Etse, G. ; Caggiano, A. (2013)
Constitutive modeling for failure properties analysis of concrete with recycled aggregates.
3rd Workshop "The new boundaries of structural concrete". Bergamo, Italy (3.-4. October 2013)
Konferenzveröffentlichung, Bibliographie

Ripani, M. ; Vrech, S. ; Caggiano, A. ; Etse, G. (2013)
Continuum-Based Modelling Of Recycled Aggregate Concrete.
Mecánica Computacional Vol XXXII. Mendoza, Argentina (19.-22. Novembre 2013)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. (2013)
Fracture-based interface formulation for FRP-to-concrete debonding mechanisms in mixed cracking mode.
FRPRCS11 Congress. Guimaraes, Portugal (26.-28. June 2013)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. ; Xargay, H. ; Folino, P. C. ; Etse, G. ; Hernan, A. C. (2013)
Numerical simulation of concrete beams reinforced with mixed recycled/industrial steel fibers.
Mecánica Computacional Vol XXXII. Mendoza, Argentina (19.-22. November 2013)
Konferenzveröffentlichung, Bibliographie

Faella, C. ; Caggiano, A. ; Lima, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. (2013)
The influence of the initial moisture conditions of coarse aggregates on the properties of RAC.
3rd Workshop on "The New Boundaries of Structural Concrete". Bergamo, Italy (3.- 4. October 2013)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2013)
A novel numerical approach for modelling the monotonic and cyclic response of FRP strips glued to concrete.
SMAR 2013, Istanbul. Istanbul, Turkey (September 2013)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Cremona, M. ; Faella, C. ; Lima, C. ; Martinelli, E. (2012)
Fracture behavior of concrete beams reinforced with mixed long/short steel fibers.
In: Construction and Building Materials, 37
Artikel, Bibliographie

Caggiano, A. ; Martinelli, E. (2012)
A unified formulation for simulating the bond behaviour of fibres in cementitious materials.
In: Materials & Design, 42
Artikel, Bibliographie

Caggiano, A. ; Pepe, M. ; Koenders, E. A. B. ; Martinelli, E. ; Etse, G. (2012)
Numerical modeling of hydration process and temperature evolution in early age concrete.
Mecom 2012 - X Congreso Argentino de Mecánica Computacional. Salta, Argentina (13.-16. November 2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. ; Faella, C. (2012)
A fully-analytical approach for modelling the response of FRP plates bonded to a brittle substrate.
In: International Journal of Solids and Structures, 49 (17)
Artikel, Bibliographie

Etse, G. ; Caggiano, A. ; Vrech, S. (2012)
Multiscale failure analysis of fiber reinforced concrete based on a discrete crack model.
In: International Journal of Fracture, 178 (1-2)
Artikel, Bibliographie

Caggiano, A. ; Etse, G. ; Martinelli, E. (2012)
Zero-thickness interface model formulation for failure behavior of fiber-reinforced cementitious composites.
In: Computers & Structures, 98-99 (5)
Artikel, Bibliographie

Etse, G. ; Caggiano, A. ; Vrech, S. (2012)
Constitutive microplane and interface laws for multiscale analysis of steel fiber reinforced concrete.
ECCOMAS 2012. Vienna, Austria (10. - 14. September 2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Vrech, S. ; Etse, G. ; Martinelli, E. (2012)
Elasto-plastic microplane model for fiber reinforced cementitious composites.
Mecom 2012 - X Congreso Argentino de Mecánica Computacional. Salta, Argentina (13.-16. November 2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. (2012)
Fracture-based model for mixed mode cracking of FRP strips glued on concrete.
Bond in Concrete 2012. Brescia, Italy (17. - 20. June 2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Cremona, M. ; Faella, C. ; Lima, C. ; Martinelli, E. (2012)
Post-cracking characterisation of concrete beams reinforced with mixed long/short steel fibers.
Bond in Concrete 2012. Brescia, Italy (17. - 20. June 2012)
Konferenzveröffentlichung, Bibliographie

Pepe, M. ; Koenders, E. A. B. ; Caggiano, A. ; Lima, C. ; Martinelli, E. (2012)
Sui processi di idratazione e le loro conseguenze sulle proprietà meccaniche di calcestruzzi con componenti riciclati.
19th CTE 2012.
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Faella, C. ; Lima, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. ; Mele, M. ; Pasqualini, A. ; Valente, M. (2012)
Sul comportamento meccanico di calcestruzzi con aggregati riciclati e ceneri volanti.
19th CTE 2012.
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. ; Faella, C. (2012)
A zero-thickness interface model for simulating the bond behaviour of FRP-strips glued on concrete.
CICE 2012. Rome, Italy (13. -15. June 2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Etse, G. ; Martinelli, E. (2011)
Interface model for fracture behaviour of fiber-reinforced cementitious composites (FRCCs) Theoretical formulation and applications.
In: European journal of environmental and civil engineering, 15 (9)
Artikel, Bibliographie

Caggiano, A. ; Martinelli, E. ; Etse, G. (2011)
Bond behavior of FRP strips glued on concrete: a novel zero-thickness interface model.
ENIEF 2011, Mecanica Computacional. Rosario, Argentina (2. - 6. November 2011)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Lima, C. ; Faella, C. ; Martinelli, E. ; Mele, M. ; Pasqualini, A. ; Realfonzo, R. ; Valente, M. (2011)
Mechanical Behaviour of Concrete with Recycled Aggregate.
The New Boundaries of Structural Concrete, 2011. Ancona, Italy (15. - 16. September 2011)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Etse, G. ; Vrech, S. (2011)
Meso- and macroscopic models to simulate the mechanical behavior of fiber reinforced concrete members.
ENIEF 2011, Mecanica Computacional. Rosario, Argentina (2. - 6. November 2011)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Etse, G. ; Martinelli, E. (2011)
A novel meso-scopic model for simulating the mechanical behaviour of Fiber Reinforced Concrete Composites (FRCCs).
The New Boundaries of Structural Concrete, 2011. Ancona, Italy (15. - 16. September 2011)
Konferenzveröffentlichung, Bibliographie

Diese Liste wurde am Tue Mar 26 02:33:26 2024 CET generiert.