TU Darmstadt / ULB / TUbiblio

Einträge mit Organisationseinheit "13 Fachbereich Bau- und Umweltingenieurwissenschaften > Institut für Werkstoffe im Bauwesen > Beton- und Materialentwicklung"

Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Es werden nur Einträge angezeigt, bei denen keine untergeordnete Organisationseinheit ausgewählt wurde. Anzahl: 73.

Deutsch

Mankel, Christoph (2020)
Ansatz zur Modellierung von Wärmespeichereigenschaften zementgebundener Baustoffsysteme mit integrierten Phasenwechselmaterialien.
Technische Universität Darmstadt
doi: 10.25534/tuprints-00012718
Dissertation, Erstveröffentlichung

Weidle, Alexandra (2019)
Untersuchungen zur schädigenden Ettringitbildung bei der Baugrundverbesserung mit hydraulischen Bindemitteln in tonmineralhaltigen Böden.
Technische Universität Darmstadt
Dissertation, Erstveröffentlichung

Caggiano, A. ; Schicchi, D. S. ; Mankel, C. ; Ukrainczyk, N. ; Koenders, E. A. B. (2018)
A mesoscale approach for modeling capillary water absorption and transport phenomena in cementitious materials.
In: Computers & Structures, 200
doi: 10.1016/j.compstruc.2018.01.013
Artikel, Bibliographie

Röser, Frank (2018)
Über die Reaktivität von Betonzusatzstoffen -Ein versuchsbasiertes Hydratationsmodell-.
Technische Universität Darmstadt
Dissertation, Erstveröffentlichung

Gilka-Bötzow, A.
Hrsg.: Koenders, E. A. B. (2016)
Stabilität von ultraleichten Schaumbetonen - Betrachtung instationärer Porenstrukturen.
Buch, Bibliographie

Ukrainczyk, N. ; Koenders, E. A. B. (2016)
Numerical Model for Chloride Ingress in Cement Based Materials: Method of Lines Implementation for Solving Coupled Multi-species Diffusion with Binding.
In: Computations and Materials in Civil Engineering, 1 (3)
Artikel, Bibliographie

Zimmermann, Adrian ; Yang, Sha ; Koenders, E. A. B. (2016)
Crumb Rubber as a Concrete Additive: Effect of Specific Surface on Air Void Content.
3rd International RILEM Conference on Microstructure Related Durability of Cementitious Composites. Nanjing (China) (24.10.2016-26.10.2016)
Konferenzveröffentlichung, Bibliographie

Gilka-Bötzow, A. ; Ukrainczyk, N. ; Koenders, E. A. B. (2016)
Modelling Mineral Foam Morphology Dynamics for Stability and Insulation Properties.
The New Boundaries of Structural Concrete 2016. Villa Orlandi, Capri Island - Italy (29.09.2016-01.10.2016)
Konferenzveröffentlichung, Bibliographie

Englisch

Zhang, Shifan (2023)
Investigation and development of power-generating building material systems based on air-cathode microbial fuel cell using Geobacter sulfurreducens.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024516
Dissertation, Erstveröffentlichung, Verlagsversion

Vallejo Quintanilla, M. ; Koleva, D. A. ; Koenders, E. A. B. (2018)
Corrosion Resistance of Construction Steel in Conditions of Simultaneous Dynamic Loading and Chloride-Containing Corrosive Environment.
In: Journal of Materials in Civil Engineering, 30 (6)
doi: 10.1061/(ASCE)MT.1943-5533.0002275
Artikel, Bibliographie

Pepe, M. ; Toledo Filho, R. D. ; Koenders, E. A. B. ; Martinelli, E. (2017)
Mix Proportioning for Structural Concrete Containing Recycled Concrete Aggregates.
71st RILEM Annual Week & ICACMS 2017. Chennai, India (03.09.2017-08.09.2017)
Konferenzveröffentlichung, Bibliographie

Weise, K. ; Röser, F. ; Ukrainczyk, N. ; Koenders, E. A. B. (2017)
Reactivity of Slag-Cement Blends by Thermogravimetric Analysis.
71st RILEM Annual Week & ICACMS 2017. Chennai, India (03.09.2017-08.09.2017)
Konferenzveröffentlichung, Bibliographie

Herget, C. A. ; Vogt, O. ; Zimmermann, A. ; Ukrainczyk, N. ; Koenders, E. A. B. (2017)
Design of Geopolymers with Reduced Content of Metakaolin and Silicate Solution.
71st RILEM Annual Week & ICACMS 2017. Chennai, India (03.09.2017-08.09.2017)
Konferenzveröffentlichung, Bibliographie

Alencar, Daniel ; Carvalho, Darlinton ; Koenders, Eduardus A. B. ; Mourão, Fernando ; Rocha, Leonardo (2017)
Devising a computational model based on data mining techniques to predict concrete compressive strength.
In: Procedia Computer Science, 108
doi: 10.1016/j.procs.2017.05.018
Artikel, Bibliographie

Martinelli, E. ; Caggiano, A. (2017)
Numerical Simulation of the Fatigue Behaviour of FRO Strips Glued to a Brittle Substrate.
9th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Berkeley, California USA (29.05.2016-01.06.2016)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Gambarelli, S. ; Martinelli, E. ; Nisticò, N. ; Pepe, M. (2016)
Experimental characterization of the post-cracking response in Hybrid Steel/Polypropylene Fiber-Reinforced Concrete.
In: Construction and Building Materials, 125
Artikel, Bibliographie

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2016)
Fracture-based interface model for FRP NSM systems in concrete.
In: Composite structures : an international journal, 152
Artikel, Bibliographie

Vrech, Sonia ; Etse, G. ; Caggiano, A. (2016)
Thermodynamically consistent elasto-plastic microplane formulation for fiber reinforced concrete.
In: International Journal of Solids and Structures, 81
Artikel, Bibliographie

Etse, G. ; Schicchi, D. S. ; Caggiano, A. ; Ripani, M. (2016)
Discontinuos Approach for Meso-Scale Modeling of Porous Materials like Concrete under High Temperature.
9th International Conference on Fracture Mechanics of Concrete and Concrete Structures. Berkeley, California USA (29.05.2016-01.06.2016)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2016)
Structural Response of FRP-to-Concrete Joints under Cyclic Actions: Fracture Mechanics and Fatigue Analysis.
8th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE 2016). Hong Kong, China (14.12.2016-16.12.2016)
Konferenzveröffentlichung, Bibliographie

Ferrara, L. ; Caggiano, A. ; Luzio, G. ; Etse, G. ; Gettu, R. ; Krelani, V. ; Rocha Ferreira, S. ; Roig Flores, M. ; Serna, P. ; Toledo Filho, R. D. (2016)
Five Years of International Collaborative Research on Self-Healing Capacity of Cementitious Composites.
fib Symposium 2016 - the International Federation for Structural Engineering. Cape Town, South Africa (21.11.2016-23.11.2016)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Schicchi, D. S. ; Etse, G. ; Martinelli, E. (2016)
Meso-Scale Modeling of Hybrid Industrial/Recycled Steel Fiber-Reinforced Concrete.
ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece (05.06.2016-10.06.2016)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Schicchi, D. S. ; Martinelli, E. ; Etse, G. (2016)
Meso-scale simulation of the post-cracking behaviour of hybrid industrial/recycled steel fibre-reinforced concrete.
4th Workshop on New Boundaries of Structural Concrete. Capri Island - Italy (29.09.2016-01.10.2016)
Konferenzveröffentlichung, Bibliographie

Vistos, L. ; Caggiano, A. ; Martinelli, E. ; Folino, P. C. (2016)
The incidence of concrete quality on buckling analysis of slender columns.
4th Workshop on New Boundaries of Structural Concrete. Capri Island - Italy (29.09.2016-01.10.2016)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2016)
Numerical Modelling of Debonding and Fatigue of FRP Strips Glued to Concrete.
INTERNATIONAL WORK SHOP ON RC FRP SEISMIC RETROFITTING. Lyon - France (19.09.2016-20.09.2016)
Konferenzveröffentlichung, Bibliographie

Vistos, L. ; Galladini, D. ; Xargay, H. ; Caggiano, A. ; Folino, P. C. ; Martinelli, E. (2016)
Hybrid Industrial/Recycled SFRC: Experimental Analysis and Design.
Italian Concrete Days 2016 - Giornate aicap e Congresso C.T.E.. Rom - Italy (27.10.2016-29.10.2016)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. ; Xargay, H. (2015)
An experimental study on the post-cracking behaviour of Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete.
In: Construction and Building Materials, 94
Artikel, Bibliographie

Etse, G. ; Ripani, M. ; Caggiano, A. ; Schicchi, D. S. (2015)
Strength and durability of concrete subjected to high temperature: continuous and discrete constitutive approaches.
In: ACI Special Publication, 305
Artikel, Bibliographie

Caggiano, A. ; Xargay, H. ; Folino, P. C. ; Martinelli, E. (2015)
Experimental and numerical characterization of the bond behavior of steel fibers recovered from waste tires embedded in cementitious matrices.
In: Cement and Concrete Composites, 62
Artikel, Bibliographie

Caggiano, A. ; Etse, G. (2015)
Coupled thermo-mechanical interface model for concrete failure analysis under high temperature.
In: Computer methods in applied mechanics and engineering, 289
Artikel, Bibliographie

Schicchi, D. S. ; Caggiano, A. (2015)
A porous-based discontinuous model for ductile fracture in metals.
In: Engineering Fracture Mechanics, 138
Artikel, Bibliographie

Caggiano, A. ; Schicchi, D. S. (2015)
A thermo-mechanical interface model for simulating the bond behaviour of FRP strips glued to concrete substrates exposed to elevated temperature.
In: Engineering Structures, 83
Artikel, Bibliographie

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2015)
A comparison between interface constitutive models: Total approach versus plasticity approach.
The 12th International Symposium on Fiber Reinforced Polymers for Reinforced Concrete Structures (FRPRCS-12) & The 5th Asia-Pacific Conference on Fiber Reinforced Polymers in Structures (APFIS-2015) Joint Conference. Nanjing, China (14.12.2015-16.12.2015)
Konferenzveröffentlichung, Bibliographie

Xargay, H. ; Caggiano, A. ; Folino, P. C. ; Lima, C. ; Martinelli, E. (2015)
Hybrid Industrial/Recycled Steel Fibre-Reinforced Concrete: Pull-out behaviour and post-cracking flexural strength (Extented abstract).
COMAT 2015 VI International Conference on Science and Technology of Composite Materials. Buenos Aires, Argentina (07.05.2015-08.05.2015)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Krelani, V. ; Ferrara, L. ; Etse, G. (2015)
Zero-Thickness Interface Formulation For Fracture Analysis Of Self-Healing Concrete.
1st Pan-American Congress on Computational Mechanics - PANACM 2015 - MECOM 2015. Buenos Aires, Argentina (27.04.2015-29.04.2015)
Konferenzveröffentlichung, Bibliographie

Vrech, S. ; Caggiano, A. ; Etse, G. (2015)
Continuous Microplane Theory and Interface Approach for Failure Form Analysis of Steel Fiber Reinforced Concrete.
1st Pan-American Congress on Computational Mechanics - PANACM 2015 & MECOM 2015. Buenos Aires, Argentina (27.04.2015-29.04.2015)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2015)
Modelling the cyclic response of FRP strips glued to a brittle substrate.
SMAR 2015 Antalya. Third Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures.. Antalya, Turkey (07.09.2015-09.09.2015)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. (2014)
A unified theoretical model for the monotonic and cyclic response of FRP strips glued to concrete.
In: Polymers, 6 (2)
Artikel, Bibliographie

Ferrara, L. ; Caggiano, A. ; Krelani, V. ; Etse, G. (2014)
Self-Healing Capacity of Cementitious Composites: Experiments and Modeling.
Proceedings of the MECOM 2014, Mecánica Computacional Vol XXXIII.
Konferenzveröffentlichung, Bibliographie

Lima, C. ; Caggiano, A. ; Faella, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. (2013)
Physical properties and mechanical behaviour of concrete made with recycled aggregates and fly ash.
In: Construction and Building Materials, 47
Artikel, Bibliographie

Martinelli, E. ; Koenders, E. A. B. ; Caggiano, A. (2013)
A numerical recipe for modelling hydration and heat flow in hardening concrete.
In: Cement and Concrete Composites, 40
doi: 10.1016/j.cemconcomp.2013.04.004
Artikel, Bibliographie

Caggiano, A. ; Martinelli, E. (2013)
A fracture-based interface model for simulating the bond behaviour of FRP strips glued to a brittle substrate.
In: Composite structures : an international journal, 99
Artikel, Bibliographie

Koenders, E. A. B. ; Pepe, M. ; Caggiano, A. ; Martinelli, E. ; Toledo Filho, R. D. (2013)
A compressive strength model for recycled aggregate systems.
ICCS 13: 1st International Conference on Concrete Sustainability. Tokyo, Japan (27.05.2013-29.05.2013)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A.
Hrsg.: Ilki, Alper (2013)
A novel numerical approach for modelling the monotonic and cyclic response of FRP strips glued to concrete.
2nd Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures (SMAR 2013). Istanbul, Turkey (09.09.2013-11.09.2013)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. (2013)
Fracture-based interface formulation for FRP-to-concrete debonding mechanisms in mixed cracking mode.
FRPRCS11 Congress. Guimaraes, Portugal (26.06.2013-28.06.2013)
Konferenzveröffentlichung, Bibliographie

Ripani, M. ; Vrech, S. ; Caggiano, A. ; Etse, G. (2013)
Continuum-Based Modelling Of Recycled Aggregate Concrete.
Mecánica Computacional Vol XXXII. Mendoza, Argentina (19.11.2013-22.11.2013)
Konferenzveröffentlichung, Bibliographie

Martinelli, E. ; Caggiano, A. ; Xargay, H. ; Folino, P. C. ; Etse, G. ; Hernan, A. C. (2013)
Numerical simulation of concrete beams reinforced with mixed recycled/industrial steel fibers.
Mecánica Computacional Vol XXXII. Mendoza, Argentina (19.11.2013-22.11.2013)
Konferenzveröffentlichung, Bibliographie

Vrech, S. ; Ripani, M. ; Etse, G. ; Caggiano, A. (2013)
Constitutive modeling for failure properties analysis of concrete with recycled aggregates.
3rd Workshop "The new boundaries of structural concrete". Bergamo, Italy (03.10.2013-04.10.2013)
Konferenzveröffentlichung, Bibliographie

Faella, C. ; Caggiano, A. ; Lima, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. (2013)
The influence of the initial moisture conditions of coarse aggregates on the properties of RAC.
3rd Workshop on "The New Boundaries of Structural Concrete". Bergamo, Italy (03.10.2013-04.10.2013)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Cremona, M. ; Faella, C. ; Lima, C. ; Martinelli, E. (2012)
Fracture behavior of concrete beams reinforced with mixed long/short steel fibers.
In: Construction and Building Materials, 37
Artikel, Bibliographie

Caggiano, A. ; Martinelli, E. (2012)
A unified formulation for simulating the bond behaviour of fibres in cementitious materials.
In: Materials & Design, 42
Artikel, Bibliographie

Caggiano, A. ; Pepe, M. ; Koenders, E. A. B. ; Martinelli, E. ; Etse, G. (2012)
Numerical modeling of hydration process and temperature evolution in early age concrete.
Mecom 2012 - X Congreso Argentino de Mecánica Computacional. Salta, Argentina (13.11.2012-16.11.2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. ; Faella, C. (2012)
A fully-analytical approach for modelling the response of FRP plates bonded to a brittle substrate.
In: International Journal of Solids and Structures, 49 (17)
Artikel, Bibliographie

Etse, G. ; Caggiano, A. ; Vrech, S. (2012)
Multiscale failure analysis of fiber reinforced concrete based on a discrete crack model.
In: International Journal of Fracture, 178 (1-2)
Artikel, Bibliographie

Caggiano, A. ; Etse, G. ; Martinelli, E. (2012)
Zero-thickness interface model formulation for failure behavior of fiber-reinforced cementitious composites.
In: Computers & Structures, 98-99 (5)
Artikel, Bibliographie

Caggiano, A. ; Martinelli, E. ; Faella, C. (2012)
A zero-thickness interface model for simulating the bond behaviour of FRP-strips glued on concrete.
CICE 2012. Rome, Italy (13.06.2012-15.06.2012)
Konferenzveröffentlichung, Bibliographie

Etse, G. ; Caggiano, A. ; Vrech, S. (2012)
Constitutive microplane and interface laws for multiscale analysis of steel fiber reinforced concrete.
ECCOMAS 2012. Vienna, Austria (10.09.2012-14.09.2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Cremona, M. ; Faella, C. ; Lima, C. ; Martinelli, E. (2012)
Post-cracking characterisation of concrete beams reinforced with mixed long/short steel fibers.
Bond in Concrete 2012. Brescia, Italy (17.06.2012-20.06.2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. (2012)
Fracture-based model for mixed mode cracking of FRP strips glued on concrete.
Bond in Concrete 2012. Brescia, Italy (17.06.2012-20.06.2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Vrech, S. ; Etse, G. ; Martinelli, E. (2012)
Elasto-plastic microplane model for fiber reinforced cementitious composites.
Mecom 2012 - X Congreso Argentino de Mecánica Computacional. Salta, Argentina (13.11.2012-16.11.2012)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Etse, G. ; Martinelli, E. (2011)
Interface model for fracture behaviour of fiber-reinforced cementitious composites (FRCCs) Theoretical formulation and applications.
In: European journal of environmental and civil engineering, 15 (9)
Artikel, Bibliographie

Caggiano, A. ; Etse, G. ; Vrech, S. (2011)
Meso- and macroscopic models to simulate the mechanical behavior of fiber reinforced concrete members.
ENIEF 2011, Mecanica Computacional. Rosario, Argentina (02.11.2011-06.11.2011)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Martinelli, E. ; Etse, G. (2011)
Bond behavior of FRP strips glued on concrete: a novel zero-thickness interface model.
ENIEF 2011, Mecanica Computacional. Rosario, Argentina (02.11.2011-06.11.2011)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Etse, G. ; Martinelli, E. (2011)
A novel meso-scopic model for simulating the mechanical behaviour of Fiber Reinforced Concrete Composites (FRCCs).
The New Boundaries of Structural Concrete, 2011. Ancona, Italy (15.09.2011-16.09.2011)
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Lima, C. ; Faella, C. ; Martinelli, E. ; Mele, M. ; Pasqualini, A. ; Realfonzo, R. ; Valente, M. (2011)
Mechanical Behaviour of Concrete with Recycled Aggregate.
The New Boundaries of Structural Concrete, 2011. Ancona, Italy (15.09.2011-16.09.2011)
Konferenzveröffentlichung, Bibliographie

Spanisch

Caggiano, A. ; Xargay, H. ; Galladini, D. ; Vistos, L. ; Folino, P. C. ; Martinelli, E. (2016)
Hormigon reforzado con fibras de acero industriales y recicladas: analisis experimental del comportamiento mecanico.
24º Jornadas Argentinas de Ingeniería Estructural. Buenos Aires (28.09.2016-30.09.2016)
Konferenzveröffentlichung, Bibliographie

Galladini, D. ; Vistos, L. ; Caggiano, A. ; Etse, G. (2016)
Hormigon reforzado con fibras de acero industriales y recicladas: reglas de diseño para uso estructural.
24º Jornadas Argentinas de Ingeniería Estructural. Buenos Aires (28.09.2016-30.09.2016)
Konferenzveröffentlichung, Bibliographie

Folino, P. C. ; Caggiano, A. ; Martinelli, E. ; Xargay, H. ; Vega, V. (2014)
Hormaigón Con Agregados Reciclados Para Ser Utilizado Como Hormigón Estructural.
23 Jornadas Argentinas de Ingeniería Estructural. Buenos Aires, Argentina (17.09.2015-19.09.2015)
Konferenzveröffentlichung, Bibliographie

Italienisch

Martinelli, E. ; Caggiano, A. ; Xargay, H. ; Folino, P. C. (2014)
Studio sperimentale sulle proprietà meccaniche di calcestruzzi rinforzati con fibre metalliche riciclate.
Atti del 20° Congresso C.T.E. Milano. Milano, Italy (06.11.2014-08.11.2014)
Konferenzveröffentlichung, Bibliographie

Pepe, M. ; Koenders, E. A. B. ; Caggiano, A. ; Lima, C. ; Martinelli, E. (2012)
Sui processi di idratazione e le loro conseguenze sulle proprietà meccaniche di calcestruzzi con componenti riciclati.
19th CTE 2012.
Konferenzveröffentlichung, Bibliographie

Caggiano, A. ; Faella, C. ; Lima, C. ; Martinelli, E. ; Pepe, M. ; Realfonzo, R. ; Mele, M. ; Pasqualini, A. ; Valente, M. (2012)
Sul comportamento meccanico di calcestruzzi con aggregati riciclati e ceneri volanti.
19th CTE 2012.
Konferenzveröffentlichung, Bibliographie

Portugiesisch

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2016)
Lei constitutiva para a simulacão da ligacão de sistemas NSM FRP no betão.
Encontro Nacional BETÃO ESTRUTURAL. DEC - Universidade de Coimbra (02.11.2016-04.11.2016)
Konferenzveröffentlichung, Bibliographie

Coelho, M. ; Caggiano, A. ; Sena-Cruz, J. ; Neves, L. (2015)
Comparação entre modelos constitutivos de interface: abordagem total versus abordagem com plasticidade,.
SPREB-FRP 2015 Proceedings, UM Guimarães, 2015.
Konferenzveröffentlichung, Bibliographie

Diese Liste wurde am Thu Nov 7 01:49:39 2024 CET generiert.