A

Ahirwal, D. ; Filipe, S. ; Neuhaus, I. ; Busch, Markus ; Schlatter, G. ; Wilhelm, M. (2014):
Large amplitude oscillatory shear and uniaxial extensional rheology of blends from linear and long-chain branched polyethylene and polypropylene.
In: Journal of Rheology, 58 (3), pp. 635-658. ISSN 1520-8516,
DOI: 10.1122/1.4867555,
[Article]

B

Bauer, Christian (2018):
Neue Verfahrensvarianten für die Hochdruck-Polyethylen-Synthese.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 11, Aachen, Shaker Verlag, TU Darmstadt, ISBN 978-3-8440-6096-6,
[Ph.D. Thesis]

Borukhova, S. ; Seeger, A. ; Noël, T. ; Wang, Q. ; Busch, Markus ; Hessel, V. (2015):
Pressure-Accelerated Azide-Alkyne Cycloaddition: Micro Capillary versus Autoclave Reactor Performance.
In: ChemSusChem, 8 (3), pp. 504-512. ISSN 1864-5631;1864-564X,
DOI: 10.1002/cssc.201403034,
[Article]

Becker, Katrin (2011):
Modellierung mikrostruktureller Eigenschaften von Ethen-Vinylacetat-Co- und Terpolymeren.
In: Darmstädter Schriftenreihe der Polymerisationstechnik ; 2, Uelvesbüll, Der Adere Verl., TU Darmstadt,
[Ph.D. Thesis]

Bauer, C. ; Becker, K. ; Herrmann, T. ; Lilge, D. ; Roth, M. ; Busch, Markus (2010):
From Fundamental Polymerization Kinetics to Process Application-A Realistic Vision?
In: Macromolecular Chemistry and Physics, 211 (5), pp. 510-519. WILEY-VCH Verlag, [Article]

Brant, P. ; Luft, G. ; Shutt, J. ; Smith, L. ; McLain, D. ; Burkhardt, T. (2008):
Polymer Production at Supercritical Conditions.
US 7,429,634 B2,
[Standards, patents]

Brüggemann, O. ; Busch, Markus ; Wolf, D. (2008):
Technische Chemie 2007.
In: Nachrichten aus der Chemie, 56 (3), pp. 333-339. ISSN 1439-9598,
DOI: 10.1002/nadc.200853332,
[Article]

Busch, Markus ; Becker, K. (2007):
Modeling the Chain-Length Differentiated Polymer Microstructure of alpha-Olefins.
In: Macromolecular Symposia, 259 (1), pp. 295-304. WILEY-VCH Verlag, [Article]

Beuermann, S. ; Buback, M. ; Busch, Markus (2007):
Free-Radical Polymerization in Reactive Supercritical Fluids.
In: Chemical Synthesis using Supercritical Fluids, pp. 326-350, Wiley-Blackwell, ISBN 9783527613687,
DOI: 10.1002/9783527613687.ch16,
[Book Section]

Busch, Markus (2004):
Modellierung differenzierter mikro-struktureller Polymereigenschaften.
In: Chemie Ingenieur Technik, 76 (6), pp. 780-787. WILEY-VCH Verlag, [Article]

Busch, Markus ; Müller, M. (2004):
Simulating acrylate polymerization reactions: toward improved mechanistic understanding and reliable parameter estimates.
In: Macromolecular Symposia, 206 (1), pp. 399-418. WILEY-VCH Verlag, [Article]

Busch, Markus ; Wulkow, M. (2003):
Modellierung differenzierter mikrostruktureller Polymereigenschaften.
In: Chemie Ingenieur Technik, 75 (8), pp. 1027-1028. WILEY-VCH Verlag, [Article]

Busch, Markus ; Müller, M. ; Wulkow, M. (2003):
The Use of Simulation Techniques in Developing Kinetic Models for Polymerization.
In: Chemical Engineering & Technology, 26 (10), pp. 1031-1040. WILEY-VCH Verlag, [Article]

Busch, Markus (2002):
Einsatz kinetischer Modellierung in der Analyse von Laboratoriumsexperimenten und ihre Übertragung zur Simulation technischer Polymerisationen.
In: Chemie Ingenieur Technik, 74 (5), p. 585. WILEY-VCH Verlag GmbH, [Article]

Busch, Markus ; Müller, M. ; Wulkow, M. (2002):
Einsatz von Simulationstechniken in der Entwicklung kinetischer Modelle für Polymerisationen.
In: Chemie Ingenieur Technik, 74 (8), pp. 1089-1098. WILEY-VCH Verlag, [Article]

Boxtel, M. van ; Busch, Markus (2001):
A General Model Describing Molecular Weight Distribution and Branching Indices in Copolymerizations Demonstrated by the High-Pressure Free-Radical Copolymerization of Ethene and Methyl Acrylate.
In: Macromolecular Theory and Simulations, 10 (1), pp. 25-37. Wiley-VCH Verlag GmbH, [Article]

Busch, Markus (2001):
Simulation as a Tool for Feasibility Studies about PIP-SEC Experiments.
In: Macromolecular Theory and Simulations, 10 (4), pp. 262-274. WILEY-VCH Verlag GmbH, [Article]

Busch, Markus (2001):
Modeling Kinetics and Structural Properties in High-Pressure Fluid-Phase Polymerization.
In: Macromolecular Theory and Simulations, 10 (5), pp. 408-429. WILEY-VCH Verlag GmbH, [Article]

Becker, M. ; Luft, G. (2000):
Der Einfluß von Reaktorverunreinigungen auf hochverdichtetes Ethylen.
In: Chem.-Ing.-Techn., 72 (12), pp. 5138-1541. ISSN 0009-286X,
[Article]

Boxtel, M. ; Busch, Markus ; Lehmann, S. (2000):
Long-chain and short-chain branches in ethene-methyl acrylate copolymers studied by quantitative 13C NMR spectroscopy.
In: Macromolecular Chemistry and Physics, 201 (3), pp. 313-319. WILEY-VCH Verlag GmbH, [Article]

Buback, M. ; Busch, Markus ; Kowollik, C. (2000):
Chain-length dependence of free-radical termination rate deduced from laser single-pulse experiments.
In: Macromolecular Theory and Simulations, 9 (8), pp. 442-452. WILEY-VCH Verlag GmbH, [Article]

Busch, Markus ; Wahl, A. (1998):
The significance of transfer reactions in pulsed laser polymerization experiments.
In: Macromolecular Theory and Simulations, 7 (2), pp. 217-224. Hüthig & Wepf Verlag, [Article]

Becker, P. ; Busch, Markus (1998):
Modeling of ethylene copolymerizations with acrylate monomers.
In: Macromolecular Theory and Simulations, 7 (4), pp. 435-446. Hühig & Wepf Verlag, [Article]

Buback, M. ; Busch, Markus ; Dröge, T. ; Mähling, F.-O. ; Prellberg, C. (1997):
Quantitative ir spectroscopic analysis of ethylene-acrylate copolymers.
In: European Polymer Journal, 33 (3), pp. 375 - 379. [Article]

Buback, M. ; Busch, Markus ; Lovis, K. ; Mähling, F.-O. (1996):
High-pressure free-radical copolymerization of ethene and butyl acrylate.
In: Macromolecular Chemistry and Physics, 197 (1), pp. 303-313. Hüthig & Wepf Verlag, [Article]

Byun, H.-S. ; Hasch, B. M. ; McHugh, M. A. ; Mähling, F.-O. ; Busch, Markus ; Buback, M. (1996):
Poly(ethylene-co-butyl acrylate). Phase Behavior in Ethylene Compared to the Poly(ethylene-co-methyl acrylate)-Ethylene System and Aspects of Copolymerization Kinetics at High Pressures.
In: Macromolecules, 29 (5), pp. 1625-1632. [Article]

Buback, M. ; Busch, Markus ; Lämmel, R. (1996):
Modeling of molecular weight distribution in pulsed laser free-radical homopolymerizations.
In: Macromolecular Theory and Simulations, 5 (5), pp. 845-861. Hüthig & Wepf Verlag, [Article]

Buback, M. ; Busch, Markus ; Dietzsch, H. ; Dröge, T. ; Lovis, K.
von Rohr, Ph. Rudolf ; Trepp, Ch. (eds.) (1996):
Cloud-point curves in ethylene-acrylate-poly(ethylene-co-acrylate) systems.
In: Process Technology Proceedings, 12, In: High Pressure Chemical Engineering Proceedings of the 3rd International Symposium on High Pressure Chemical Engineering, pp. 175 - 178, Elsevier, [Book Section]

Buback, M. ; Busch, Markus ; Lovis, K. ; Mähling, F.-O. (1995):
Mini-Technikumsanlage für Hochdruck-Polymerisationen bei kontinuierlicher Reaktionsführung.
In: Chemie Ingenieur Technik, 67 (12), pp. 1652-1655. WILEY-VCH Verlag, [Article]

Buback, M. ; Busch, Markus ; Lovis, K. ; Mähling, F.-O. (1994):
Entwicklung eines kontinuierlich betriebenen Hochdruck-Hochtemperatur-Rührkessels mit Licht-Einkopplung.
In: Chemie Ingenieur Technik, 66 (4), pp. 510-513. WILEY-VCH Verlag, [Article]

Buback, M. ; Busch, Markus ; Lovis, K. (1993):
Excimerlaser-induzierte radikalische Homopolymerisation von Butylacrylat in einem kontinuierlich betriebenen Rührkessel.
In: Chemie Ingenieur Technik, 65 (10), pp. 1232-1235. WILEY-VCH Verlag, [Article]

Buback, M. ; Busch, Markus ; Panten, K. ; Vögele, H.-P. (1992):
Direkte spektroskopische Bestimmung von Verweilzeitverteilungen bei Fluidphasen-Reaktionen bis zu hohem Druck.
In: Chemie Ingenieur Technik, 64 (4), pp. 352-354. WILEY-VCH Verlag, [Article]

C

Coote, M. ; Izgorodina, E. ; Cavigliasso, G. ; Roth, M. ; Busch, Markus ; Barner-Kowollik, C. (2006):
Addition-Fragmentation Kinetics of Fluorodithioformates (F-RAFT) in Styrene, Vinyl Acetate, and Ethylene Polymerization: An Ab Initio Investigation.
In: Macromolecules, 39 (13), pp. 4585-4591. [Article]

Coote, M. ; Izgorodina, E. ; Krenske, E. ; Busch, Markus ; Barner-Kowollik, C. (2006):
Quantum Chemical Mapping of Initialization Processes in RAFT Polymerization.
In: Macromolecular Rapid Communications, 27 (13), pp. 1015-1022. WILEY-VCH Verlag, [Article]

Chaffey-Millar, H. ; Busch, Markus ; Davis, T. ; Stenzel, M. ; Barner-Kowollik, C. (2005):
Advanced Computational Strategies for Modelling the Evolution of Full Molecular Weight Distributions Formed During Multiarmed (Star) Polymerisations.
In: Macromolecular Theory and Simulations, 14 (3), pp. 143-157. WILEY-VCH Verlag, [Article]

Claus, Peter ; Luft, G. ; Vogel, Herbert (2001):
Entwicklung neuer Materialien für die Katalyse.
In: Thema Forschung, 2, pp. 132-141. TU Darmstadt, ISSN 1434-7768,
[Article]

D

Dernbach, Maria ; Kirsch, Julian ; Busch, Markus (2020):
Modeling Rheological Properties of HDPE Based on Polymerization Kinetics.
In: Chemie Ingenieur Technik, 5 (92), pp. 1-6. Wiley-VCH, ISSN 0009-286X,
DOI: 10.1002/cite.201900160,
[Article]

Dornik, H.-P. ; Luft, G. ; Rau, A. ; Wieczorek, T. (2004):
Deactivation kinetics of metallocene-catalyzed ethene polymerization at high temperature and elevated pressure.
In: Macromol. Mater. Eng., 289 (5), pp. 475-479. [Article]

Dörr, H. ; Kinzl, M. ; Luft, G. ; Ruhl, O.
Brunner, G. (ed.) (2004):
Influence of additional components on the solvent power of supercritical ethylene.
In: Supercritical fluids as solvents and reaction media, pp. 39-60, Elsevier, [Book Section]

Dornik, H.-P. ; Rau, A. ; Wieczorek, T. ; Luft, G. (2003):
Metallocene-catalyzed Solution Polymerizations of Ethene at Elevated Pressures.
In: Macromol. Mater. Eng., 288 (7), pp. 558-561. [Article]

E

Eselem Bungu, Paul S. ; Pflug, Kristina ; Busch, Markus ; Pasch, Harald (2018):
Comprehensive analysis of novel grafted polyethylenes using multidimensional fractionation methods.
In: Polymer Chemistry, 9 (40), pp. 5051-5065. Royal Society of Chemistry (RSC), ISSN 1759-9954,
DOI: 10.1039/C8PY01122B,
[Article]

Eckes, David (2018):
Modelling of the industrial LDPE-synthesis for the tail-end reactor technologyy.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 10, Aachen, Shaker Verlag, TU Darmstadt, ISBN 9783844059601,
[Ph.D. Thesis]

Eckes, D. ; Busch, Markus (2016):
Coupled Deterministic and Stochastic Modeling of an Industrial Multi-Zone LDPE Autoclave Reactor.
In: Macromolecular Symposia, 360 (1), pp. 23-31. ISSN 0258-0322,
DOI: 10.1002/masy.201500115,
[Article]

F

Fries, Sebastian (2020):
Modelling of Fouling Mechanisms in the LDPE Synthesis.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 15, Darmstadt, Shaker Verlag, Technische Universität Darmstadt, ISBN 978-3-8440-7132-0,
[Ph.D. Thesis]

Fries, S. ; Castaneda-Zuniga, D. M. ; Duchateau, J. ; Neuteboom, P. ; Porras, C. T. ; Busch, Markus (2016):
Fouling in the High Pressure LDPE Process: Experimental and Computational Investigation Approach.
In: Macromolecular Symposia, 360 (1), pp. 78-86. ISSN 0258-0322,
DOI: 10.1002/masy.201500112,
[Article]

G

Gundrum, Christina (2012):
Untersuchungen der Stabilität von Ethen-Hochdruck-Polymerisationsmischungen in Experiment und Simulation.
In: Darmstädter Schriftenreihe der Polymerisationstechnik ; 3, Uelvesbüll, Der Andere Verl., TU Darmstadt, ISBN 978-3-86247-247-5,
[Ph.D. Thesis]

H

Hapke, Sören ; Luinstra, Gerrit Albert ; Zentel, Kristina Maria (2021):
Optimization of a 3D-printed tubular reactor for free radical polymerization by CFD.
In: Journal of Flow Chemistry, 2021, Springer, ISSN 2062-249X, e-ISSN 2063-0212,
DOI: 10.1007/s41981-021-00154-5,
[Article]

Hilfer, Anton ; Degenkolb, Jonas ; Busch, Markus (2019):
Experimental Investigation of Ethene Decomposition by Video – Determination of Physical Data for Simulation Model.
In: Chemie Ingenieur Technik, 91 (5), pp. 657-662. WILEY, ISSN 0009286X,
DOI: 10.1002/cite.201800204,
[Article]

Herrmann, Thomas (2012):
Modellierung technischer Hochdruck-LDPE-Reaktoren.
In: Darmstädter Schriftenreihe der Polymerisationstechnik ; 4, Uelvesbüll, Der Andere Verl., TU Darmstadt, ISBN 978-3-86247-261-1,
[Ph.D. Thesis]

K

Kadel, I. ; Herrmann, T. ; Busch, Markus (2013):
Modeling Free Radical Ethylene Polymerization with Multifunctional Comonomers in Tubular Reactors: Influence on Microstructural LDPE Properties.
In: Macromolecular Symposia, 324 (1), pp. 67-77. ISSN 0258-0322,
DOI: 10.1002/masy.201200069,
[Article]

Kasalo, R. ; Busch, Markus (2013):
Quantitative NMR Spectroscopy and Determination of Polymer Microstructure of Ethylene-Styrene and Ethylene-Isobutylene Co-Polymers.
In: Macromolecular Symposia, 324 (1), pp. 78-81. ISSN 0258-0322,
DOI: 10.1002/masy.201200070,
[Article]

Koch, S. ; Busch, Markus (2011):
Reversible Addition-Fragmentation Chain Transfer Polymerization Implemented as Continuous Process in CSTR and PFR at Elevated Reaction Conditions.
In: Chemie Ingenieur Technik, 83 (10), pp. 1720-1727. WILEY-VCH Verlag, [Article]

Kim, D.-M. ; Busch, Markus ; Hoefsloot, H. ; Iedema, P. (2004):
Molecular weight distribution modeling in low-density polyethylene polymerization; impact of scission mechanisms in the case of CSTR.
In: Chemical Engineering Science, 59 (3), pp. 699 - 718. [Article]

Kinzl, M. ; Luft, G. ; Wolf, B. A. (2003):
The viscosity of solutions of LDPE in ethylene as a function of temperature and pressure.
In: J. of Rheology, 47 (4), pp. 869-877. ISSN 0148-6055,
[Article]

Kinzl, M. ; Luft, G. ; Adidharma, H. ; Radosz, M. (2000):
SAFT Modeling of inert-gas effects on the cloud-point pressure in ethylene copolymerisation systems:poly(ethylene-co-vinylacetate)+vinyl acetate-ethylene and poly(ethylene-co-hexene-1+hexene-1+ethylene with carbon dioxide, nitrogen or n-butane.
In: Ind. Eng. Chem. Res., 39 (2), pp. 541-546. [Article]

L

Lovrić, Ruz̆ica (2018):
High-pressure synthesis and characterisation of ethene co- and terpolymerisation with different monomers.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 8, Aachen, Shaker Verlag, TU Darmstadt, ISBN 9783844056761,
[Ph.D. Thesis]

Löber, Jens (2016):
Einsatz später Übergangsmetalle in der Hochdruck-Polyethylensynthese mit Acrylaten.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 7, Uelversbüll, Der Andere Verlag, TU Darmstadt, ISBN 978-3-86247-570-4,
[Ph.D. Thesis]

Luft, G.
Uhde High-Pressure Technology (Corporate Creator) (2009):
Prevention of ethylene decomposition in LDPE plants.
Hagen, Global LDPE Maintenance Workshop, Hagen, 15.6.2009, [Conference or Workshop Item]

Luft, G. ; Broedermann, J. ; Scheele, T. (2007):
Pressure relief of high pressure devices.
In: Chem. Eng. Technol., 30 (6), pp. 695-701. [Article]

Luft, G. ; Broedermann, J. ; Disser, C. ; Dorn, M. (2006):
Influence of hydrogen peroxides on decomposition of ethylene.
Lyon, European LDPE Producers Safety Meetin, Lyon, 16.06.2006, [Conference or Workshop Item]

Luft, G. ; Mattes, K. ; Brant, P. ; Shutt, R. (2004):
Polymerisation of propene with a metallocene catalyst under high pressure.
138, In: Dechema Monographs, Papers of the 8th international workshop on polymer reaction engineering, pp. 27-35, Hamburg, Wiley-VCH, [Book Section]

Luft, G. (2004):
Kinetic properties at high pressure.
9, In: High pressure process technology : fundamentals and applications. Eds.: A.Bertucco and G. Vetter., pp. 65-91, Elsevier, [Book Section]

Luft, G. (2004):
Industrial reaction units - reactors for homogeneous reactions.
9, In: High pressure process technology : fundamentals and applications. Eds.: A.Bertucco and G. Vetter., pp. 243-254, Elsevier, [Book Section]

Luft, G. ; Maier, S. (2004):
Savety and control in high pressure plant design and operation - general safety aspects in high-pressure facilities.
9, In: High pressure process technology : fundamentals and applications. Eds.: A.Bertucco and G. Vetter., pp. 405-420, [Book Section]

Luft, G. (2004):
Savety and control in high pressure plant design and operation - runaway of polyethylene reactors.
9, In: High pressure process technology : fundamentals and applications. Eds.: A.Bertucco and G. Vetter., pp. 421-429, Elsevier, [Book Section]

Luft, G. (2004):
Application - high pressure polymerization with metallocene catalysts.
9, In: High pressure process technology : fundamentals and applications. Eds.: A.Bertucco and G. Vetter., pp. 527-536, Elsevier, [Book Section]

Luft, G. (2004):
High-temperature initiators for the synthesis of LDPE - Risk of decomposition.
In: Handbook Maak Business Services,
Schweiz, [Conference or Workshop Item]

Luft, G. (2003):
Polymere unter Druck.
In: Polymer Forschung Darmstadt, pp. 38-39. GIT Verlag, [Article]

Luft, G. (2001):
Polymere unter Druck.
In: Polymer Forschung Darmstadt, pp. 30-32. GIT Verlag, [Article]

M

Mähling, F.-O. ; Klimesch, R. ; Schwibach, M. ; Buback, M. ; Busch, Markus (1999):
Modellierung der Ethen-Polymerisation im Elenac-Hochdruck-Rohrreaktorverfahren.
In: Chemie Ingenieur Technik, 71 (11), pp. 1301-1306. WILEY-VCH Verlag, [Article]

N

Nowottny, Jonas (2021):
High-Pressure Calorimetry: Evaluation of Methods and Measurement of Heat Capacities.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 18, Düren, Shaker Verlag, Technische Universität Darmstadt, ISBN 978-3-8440-8074-2,
[Ph.D. Thesis]

Neuhaus, Eric (2015):
Hybridsimulation der industriellen Hochdruckpolymerisation von Ethen.
In: Darmstädter Schriftenreihe der Polymerisationstechnik ; 6, Uelvesbüll, Der Andere Verl., TU Darmstadt,
[Ph.D. Thesis]

Neuhaus, E. ; Herrmann, T. ; Vittorias, I. ; Lilge, D. ; Mannebach, G. ; Gonioukh, A. ; Busch, Markus (2014):
Modeling the Polymeric Microstructure of LDPE in Tubular and Autoclave Reactors with a Coupled Deterministic and Stochastic Simulation Approach.
In: Macromolecular Theory and Simulations, 23 (7), pp. 415-428. ISSN 1018-5054,
DOI: 10.1002/mats.201400014,
[Article]

Neuhaus, E. ; Busch, Markus ; Gonioukh, A. ; Herrmann, T. ; Lilge, D. ; Mannebach, G. ; Vittorias, I. (2013):
Coupling Deterministic and Stochastic Simulation to Model the Polymeric Microstructure of LDPE.
In: Macromolecular Symposia, 324 (1), pp. 62-66. ISSN 0258-0322,
DOI: 10.1002/masy.201200068,
[Article]

Neuhaus, E. ; Busch, Markus ; Gonioukh, A. ; Herrmann, T. ; Lilge, D. ; Mannebach, G. ; Vittorias, I. (2012):
Vortrag: Modelling the Polymeric Microstructure of LDPE with a Novel Hybrid Simulation Approach.
AIChE Annual Meeting 2012, Pittsburgh, Pennsylvania, [Conference or Workshop Item]

Neuhaus, E. ; Busch, Markus ; Gonioukh, A. ; Herrmann, T. ; Lilge, D. ; Mannebach, G. ; Vittorias, I. (2012):
Vortrag und Poster: Modelling the Polymeric Microstructure of LDPE with a Novel Hybrid Simulation Approach.
Polymer Reaction Engineering, Cancun, Mexico, [Conference or Workshop Item]

Neuhaus, E. ; Herrmann, T. ; Busch, Markus (2011):
Vortrag: Simulation industrieller LDPE-Reaktoren.
ProcessNet Jahrestreffen des Fachausschusses Hochdruckverfahrenstechnik, Maribor, Slowenien, [Conference or Workshop Item]

P

Petzold, Sascha (2020):
Modellierung technischer Ethylen-Vinylacetat-Copolymerisationen.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 17, Düren, Shaker Verlag, TU Darmstadt, ISBN 978-3-8440-7479-6,
[Ph.D. Thesis]

Peikert, Paul ; Pflug, Kristina M. ; Busch, Markus (2019):
Modeling of High-Pressure Ethene Homo- and Copolymerization.
In: Chemie Ingenieur Technik, 91 (5), pp. 673-677. Wiley-Blackwell, ISSN 0009-286X,
DOI: 10.1002/cite.201800206,
[Article]

Pflug, Kristina Maria Gudrun Kunigunde (2018):
Linking reaction conditions with polymer properties for the LDPE process.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 12, Aachen, Shaker Verlag, TU Darmstadt, ISBN 978-3-8440-6363-9,
[Ph.D. Thesis]

Pflug, K. M. ; Busch, Markus (2016):
Impact of Thermo-Physical Data on the Modeling of High-Pressure Polymerizations.
In: Chemie Ingenieur Technik, 88 (11), pp. 1665-1675. ISSN 0009-286X,
DOI: 10.1002/cite.201600082,
[Article]

R

Ruhl, O. ; Luft, G. (2011):
Phase Behavior of Mixtures of Propene and Isotactic Polypropene under High Pressure.
In: Chemie Ingenieur Technik, 83 (10), pp. 1663-1666. WILEY-VCH Verlag, [Article]

Roth, Marion (2010):
Neue Konzepte in der Hochdruck-Polyethylensynthese.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 1, Tönning u.a., Der Andere Verl., ISBN 978-3-86247-044-0 ; 3-86247-044-X,
[Book]

S

Sartorius, Jana ; Busch, Markus (2020):
Kinetic Investigation of Peroxide Decomposition by Calorimetry under High‐Pressure.
In: Chemie Ingenieur Technik, 92 (3), pp. 295-298. WILEY-VCH, ISSN 0009-286X,
DOI: 10.1002/cite.201900081,
[Article]

Steiger, Silke (2017):
Untersuchung der Stabilität von Ethen-Initiator-Mischungen unter Hochdruckbedingungen : – in Experiment und Simulation –.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 9, Aachen, Shaker Verlag, TU Darmstadt, ISBN 9783844054132,
[Ph.D. Thesis]

Spasova, Berta (2014):
Miniaturisierter GlidArc® Plasmareformer und Methanreformierung auf der Basis perovskitischer Katalysatoren.
TU Darmstadt,
[Ph.D. Thesis]

Seeger, A. ; Brickmann, J. ; Luft, G. (2009):
Penetration of organic liquids into dry portland cement mortar under ambient and high pressure.
In: Chem. Eng. Technol., 32 (6), pp. 891-902. [Article]

Seeger, A. ; Freitag, D. ; Freidel, F. ; Luft, G. (2009):
Melting Point of polymers under high pressure Pt. 2: Influence of gases.
In: Thermochim. Acta, 486, pp. 46-51. [Article]

Schmidt, C.-U. ; Busch, Markus ; Lilge, D. ; Wulkow, M. (2005):
Detailed Molecular Structure Modeling - A Path Forward to Designing Application Properties of ldPE.
In: Macromolecular Materials and Engineering, 290 (4), pp. 404-414. WILEY-VCH Verlag, [Article]

W

Wilhelm, Sebastian (2021):
High-Pressure Polymerization of Ethene: Kinetic Investigation of Copolymerization and Chain-Transfer Reactions.
In: Darmstädter Schriftenreihe der Polymerisationstechnik, 19, Düren, Shaker Verlag, Technische Universität Darmstadt, ISBN 978-3-8440-8090-2,
[Ph.D. Thesis]

Wulkow, M. ; Busch, Markus ; Davis, T. ; Barner-Kowollik, C. (2004):
Implementing the reversible addition fragmentation chain transfer process in PREDICI.
In: Journal of Polymer Science Part A: Polymer Chemistry, 42 (6), pp. 1441-1448. Wiley Subscription Services, Inc., A Wiley Company, [Article]

Z

Zentel, Kristina M. ; Degenkolb, Jonas ; Busch, Markus (2021):
Using a Multiscale Modeling Approach to Correlate Reaction Conditions with Polymer Microstructure and Rheology.
In: Macromolecular Theory and Simulations, 30 (1), p. 2000047. ISSN 1018-5054,
DOI: 10.1002/mats.202000047,
[Article]

Zentel, Kristina Maria ; Fassbender, Marcel ; Pauer, Werner ; Luinstra, Gerrit Albert
Moscatelli, Davide ; Sponchioni, Mattia (eds.) (2020):
3D Printing as Chemical Reaction Engineering Booster.
In: Advances in chemical engineering ; 56, In: Advances in Polymer Reaction Engineering, pp. 97-137, Amsterdam, Elsevier, ISBN 978-0-12-820645-4,
[Book Section]