TU Darmstadt / ULB / TUbiblio

Milling and quality monitoring of sheet metal edges in continuous flow production

Abele, Eberhard and Schmidt, Sebastian (PTW) and Turan, Emrah and Jalizi, Behzad and Hähn, Felix (2012):
Milling and quality monitoring of sheet metal edges in continuous flow production.
In: MM Science Journal, Prague, Czech Republic, Special Issue | MATAR 2012, 9th International Conference on Machine Tools, Automation, Technology and Robotics, September 12-14, 2012, Prague, Czech Republic,, pp. 1-7, ISSN 1803-1269,
[Article]

Abstract

Within the Collaborative Research Center (CRC) 666 at the Technische Universität Darmstadt multichambered profiles of steel are created in continuous flow production. An essential part of that process is the band edge processing by high speed milling. The resulting burr has a negative influence on the subsequent processes. To reduce the burr height a special cutting geometry was developed. Integrating an in-line monitoring system allows to monitor the machining quality. Furthermore, a targeted intervention in the processing based on the measured data ensures dimensional accuracy of the created profiles.

Item Type: Article
Erschienen: 2012
Creators: Abele, Eberhard and Schmidt, Sebastian (PTW) and Turan, Emrah and Jalizi, Behzad and Hähn, Felix
Title: Milling and quality monitoring of sheet metal edges in continuous flow production
Language: English
Abstract:

Within the Collaborative Research Center (CRC) 666 at the Technische Universität Darmstadt multichambered profiles of steel are created in continuous flow production. An essential part of that process is the band edge processing by high speed milling. The resulting burr has a negative influence on the subsequent processes. To reduce the burr height a special cutting geometry was developed. Integrating an in-line monitoring system allows to monitor the machining quality. Furthermore, a targeted intervention in the processing based on the measured data ensures dimensional accuracy of the created profiles.

Journal or Publication Title: MM Science Journal, Prague, Czech Republic, Special Issue | MATAR 2012, 9th International Conference on Machine Tools, Automation, Technology and Robotics, September 12-14, 2012, Prague, Czech Republic,
Uncontrolled Keywords: HSC, milling, burr height reduction, in-line quality monitoring, continuous flow production, linear flow splitting
Divisions: 16 Department of Mechanical Engineering
16 Department of Mechanical Engineering > Institute of Production Management, Technology and Machine Tools (PTW)
16 Department of Mechanical Engineering > Institute of Production Management, Technology and Machine Tools (PTW) > Machine tools and Components
16 Department of Mechanical Engineering > Institute of Production Management, Technology and Machine Tools (PTW) > Machining Technology
DFG-Collaborative Research Centres (incl. Transregio)
DFG-Collaborative Research Centres (incl. Transregio) > Collaborative Research Centres
Zentrale Einrichtungen
DFG-Collaborative Research Centres (incl. Transregio) > Collaborative Research Centres > CRC 666: Integral Sheet Metal Design with Higher Order Bifurcations
Date Deposited: 05 Nov 2012 12:01
Export:
Suche nach Titel in: TUfind oder in Google

Optionen (nur für Redakteure)

View Item View Item