Kramer, Philipp ; Groche, Peter (2019)
Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming.
In: Lubricants, 7 (2)
doi: 10.3390/lubricants7020012
Artikel, Bibliographie
Dies ist die neueste Version dieses Eintrags.
Kurzbeschreibung (Abstract)
The tribological system plays a critical part in designing robust and efficient cold forging operations. The appropriate selection of lubrication allows to forge defect-free workpieces with high dimensional precision and desired surface finish while ensuring that no defects, such as cracks or seams, occur. Additionally, friction and wear are highly affected by the choice of tribological system, which in turn influence the cost-effectiveness of the forging operation by preventing premature tool failure. Next to the employed tool coating and work piece material, the lubrication system and work piece surface topography are the main factors influencing the aforementioned constraints when designing efficient forging operations. In order to choose the appropriate tribological system before implementing it within an industrial forging operation, tribometers are used to characterize the performance of the tribological system. In this paper, the necessity to account for not only the tribological loads when designing these tribometer tests as is typical for existing methodologies, but also for process and lubricant specific properties will be highlighted. With the help of the tribometer sliding compression test, it will be shown that using liquid lubricants necessitates the need to account for the escape of lubricant, while this is not true for solid lubricants. The escape of lubricant from the contact zone is governed by lubricant properties as well as the contact kinematics and may lead to significantly different results regarding friction and wear. In order to account for this escape, the tribometer test must be specifically designed to reproduce the contact kinematics of the investigated industrial forging operation.
| Typ des Eintrags: | Artikel |
|---|---|
| Erschienen: | 2019 |
| Autor(en): | Kramer, Philipp ; Groche, Peter |
| Art des Eintrags: | Bibliographie |
| Titel: | Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming |
| Sprache: | Englisch |
| Publikationsjahr: | 2019 |
| Verlag: | MDPI |
| Titel der Zeitschrift, Zeitung oder Schriftenreihe: | Lubricants |
| Jahrgang/Volume einer Zeitschrift: | 7 |
| (Heft-)Nummer: | 2 |
| DOI: | 10.3390/lubricants7020012 |
| URL / URN: | https://doi.org/10.3390/lubricants7020012 |
| Zugehörige Links: | |
| Kurzbeschreibung (Abstract): | The tribological system plays a critical part in designing robust and efficient cold forging operations. The appropriate selection of lubrication allows to forge defect-free workpieces with high dimensional precision and desired surface finish while ensuring that no defects, such as cracks or seams, occur. Additionally, friction and wear are highly affected by the choice of tribological system, which in turn influence the cost-effectiveness of the forging operation by preventing premature tool failure. Next to the employed tool coating and work piece material, the lubrication system and work piece surface topography are the main factors influencing the aforementioned constraints when designing efficient forging operations. In order to choose the appropriate tribological system before implementing it within an industrial forging operation, tribometers are used to characterize the performance of the tribological system. In this paper, the necessity to account for not only the tribological loads when designing these tribometer tests as is typical for existing methodologies, but also for process and lubricant specific properties will be highlighted. With the help of the tribometer sliding compression test, it will be shown that using liquid lubricants necessitates the need to account for the escape of lubricant, while this is not true for solid lubricants. The escape of lubricant from the contact zone is governed by lubricant properties as well as the contact kinematics and may lead to significantly different results regarding friction and wear. In order to account for this escape, the tribometer test must be specifically designed to reproduce the contact kinematics of the investigated industrial forging operation. |
| Sachgruppe der Dewey Dezimalklassifikatin (DDC): | 600 Technik, Medizin, angewandte Wissenschaften > 600 Technik |
| Fachbereich(e)/-gebiet(e): | 16 Fachbereich Maschinenbau 16 Fachbereich Maschinenbau > Institut für Produktionstechnik und Umformmaschinen (PtU) |
| Hinterlegungsdatum: | 02 Aug 2024 12:34 |
| Letzte Änderung: | 02 Aug 2024 12:34 |
| PPN: | |
| Export: | |
| Suche nach Titel in: | TUfind oder in Google |
Verfügbare Versionen dieses Eintrags
-
Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming. (deposited 03 Nov 2019 20:55)
- Friction Measurement under Consideration of Contact Conditions and Type of Lubricant in Bulk Metal Forming. (deposited 02 Aug 2024 12:34) [Gegenwärtig angezeigt]
 |
Frage zum Eintrag |
Optionen (nur für Redakteure)
 |
Redaktionelle Details anzeigen |
Drucken
Impressum