TU Darmstadt / ULB / TUbiblio

High voltage insulation properties of HFO1234ze

Koch, Myriam ; Franck, Christian M. (2015)
High voltage insulation properties of HFO1234ze.
In: IEEE Transactions on Dielectrics and Electrical Insulation, 22 (6)
doi: 10.1109/TDEI.2015.005118
Artikel, Bibliographie

Kurzbeschreibung (Abstract)

Recently it was shown that it is possible to predict the breakdown voltages of arbitrary electrode configurations under standard voltage applications for electron attaching gases with a stepped leader model originally proposed for SF6. In this contribution this model was applied to the hydrofluoroolefin HFO1234ze. The parameters, which are necessary for the modeling, are derived from measurement of statistical and formative time lags in an electrode configuration with a homogeneous background field with a small protrusion. The parameters are used to predict the breakdown voltage for technical relevant geometries and standard voltage wave shapes. To verify these predictions, breakdown experiments in nearly homogeneous and strongly inhomogeneous field configurations with AC and lightning impulse voltage application of both polarities were performed. The hydrofluoroolefin exhibits insulation properties which are quite similar to those of SF6. Therefore it could be considered as admixture for high voltage gaseous insulations or as replacement in medium voltage equipment. For applications using the pure gas the temperature and pressure range has to be limited to prevent liquefaction. The good match between the simulations and the experiments gives evidence that the model can be applied to a broad range of other novel electron attaching gases as well.

Typ des Eintrags: Artikel
Erschienen: 2015
Autor(en): Koch, Myriam ; Franck, Christian M.
Art des Eintrags: Bibliographie
Titel: High voltage insulation properties of HFO1234ze
Sprache: Englisch
Publikationsjahr: 1 Dezember 2015
Verlag: IEEE
Titel der Zeitschrift, Zeitung oder Schriftenreihe: IEEE Transactions on Dielectrics and Electrical Insulation
Jahrgang/Volume einer Zeitschrift: 22
(Heft-)Nummer: 6
DOI: 10.1109/TDEI.2015.005118
Kurzbeschreibung (Abstract):

Recently it was shown that it is possible to predict the breakdown voltages of arbitrary electrode configurations under standard voltage applications for electron attaching gases with a stepped leader model originally proposed for SF6. In this contribution this model was applied to the hydrofluoroolefin HFO1234ze. The parameters, which are necessary for the modeling, are derived from measurement of statistical and formative time lags in an electrode configuration with a homogeneous background field with a small protrusion. The parameters are used to predict the breakdown voltage for technical relevant geometries and standard voltage wave shapes. To verify these predictions, breakdown experiments in nearly homogeneous and strongly inhomogeneous field configurations with AC and lightning impulse voltage application of both polarities were performed. The hydrofluoroolefin exhibits insulation properties which are quite similar to those of SF6. Therefore it could be considered as admixture for high voltage gaseous insulations or as replacement in medium voltage equipment. For applications using the pure gas the temperature and pressure range has to be limited to prevent liquefaction. The good match between the simulations and the experiments gives evidence that the model can be applied to a broad range of other novel electron attaching gases as well.

Fachbereich(e)/-gebiet(e): 18 Fachbereich Elektrotechnik und Informationstechnik
18 Fachbereich Elektrotechnik und Informationstechnik > Institut für Elektrische Energiesysteme > Hochspannungstechnik
18 Fachbereich Elektrotechnik und Informationstechnik > Institut für Elektrische Energiesysteme
Hinterlegungsdatum: 20 Mär 2024 13:29
Letzte Änderung: 06 Jun 2024 10:28
PPN: 518866351
Export:
Suche nach Titel in: TUfind oder in Google
Frage zum Eintrag Frage zum Eintrag

Optionen (nur für Redakteure)
Redaktionelle Details anzeigen Redaktionelle Details anzeigen