Liu, Xingmin ; Liu, Heqiang ; Wu, Hongjing ; Zhou, Qian ; Liang, Hongsheng ; Liu, Guoqiang ; Duan, Wenyan ; Gu, Yue ; Xu, Chengying ; Travitzky, Nahum ; Colombo, Paolo ; Riedel, Ralf (2023)
Structural Electromagnetic Absorber Based on MoS2/PyC‐Al2O3 Ceramic Metamaterials.
In: Small, 19 (33)
doi: 10.1002/smll.202300664
Artikel, Bibliographie
Kurzbeschreibung (Abstract)
Limited by the types of suitable absorbents as well as the challenges in engineering the nanostructures (e.g., defects, dipoles, and hetero-interface) using state-of-the-art additive manufacturing (AM) techniques, the electromagnetic (EM) wave absorption performance of the current ceramic-based materials is still not satisfying. Moreover, because of the high residual porosity and the possible formation of cracks during sintering or pyrolysis, AM-formed ceramic components may in many cases exhibit low mechanical strength. In this work, semiconductive MoS2 and conductive PyC modified Al2O3 (MoS2/PyC-Al2O3) ceramic-based structural EM metamaterials are developed by innovatively harnessing AM, precursor infiltration and pyrolysis (PIP), and hydrothermal methods. Three different meta-structures are successfully created, and the ceramic-based nanocomposite benefit from its optimization of EM parameters. Ultra-broad effective absorption bandwidth (EAB) of 35 GHz is achieved by establishment of multi-loss mechanism via nanostructure engineering and fabrication of meta-structures via AM. Due to the strengthening by the PyC phase, the bending strength of the resulting ceramics can reach approximate to 327 MPa, which is the highest value measured on 3D-printed ceramics of this type that has been reported so far. For the first time, the positive effect deriving from the engineering of the microscopic nano/microstructure and of the macroscopic meta-structure of the absorber on the permittivity and EM absorption performance is proposed. Integration of outstanding mechanical strength and ultra-broad EAB is innovatively realized through a multi-scale design route. This work provides new insights for the design of advanced ceramic-based metamaterials with outstanding performance under extreme environment.
| Typ des Eintrags: | Artikel |
|---|---|
| Erschienen: | 2023 |
| Autor(en): | Liu, Xingmin ; Liu, Heqiang ; Wu, Hongjing ; Zhou, Qian ; Liang, Hongsheng ; Liu, Guoqiang ; Duan, Wenyan ; Gu, Yue ; Xu, Chengying ; Travitzky, Nahum ; Colombo, Paolo ; Riedel, Ralf |
| Art des Eintrags: | Bibliographie |
| Titel: | Structural Electromagnetic Absorber Based on MoS2/PyC‐Al2O3 Ceramic Metamaterials |
| Sprache: | Englisch |
| Publikationsjahr: | 16 August 2023 |
| Verlag: | Wiley-VCH |
| Titel der Zeitschrift, Zeitung oder Schriftenreihe: | Small |
| Jahrgang/Volume einer Zeitschrift: | 19 |
| (Heft-)Nummer: | 33 |
| DOI: | 10.1002/smll.202300664 |
| Kurzbeschreibung (Abstract): | Limited by the types of suitable absorbents as well as the challenges in engineering the nanostructures (e.g., defects, dipoles, and hetero-interface) using state-of-the-art additive manufacturing (AM) techniques, the electromagnetic (EM) wave absorption performance of the current ceramic-based materials is still not satisfying. Moreover, because of the high residual porosity and the possible formation of cracks during sintering or pyrolysis, AM-formed ceramic components may in many cases exhibit low mechanical strength. In this work, semiconductive MoS2 and conductive PyC modified Al2O3 (MoS2/PyC-Al2O3) ceramic-based structural EM metamaterials are developed by innovatively harnessing AM, precursor infiltration and pyrolysis (PIP), and hydrothermal methods. Three different meta-structures are successfully created, and the ceramic-based nanocomposite benefit from its optimization of EM parameters. Ultra-broad effective absorption bandwidth (EAB) of 35 GHz is achieved by establishment of multi-loss mechanism via nanostructure engineering and fabrication of meta-structures via AM. Due to the strengthening by the PyC phase, the bending strength of the resulting ceramics can reach approximate to 327 MPa, which is the highest value measured on 3D-printed ceramics of this type that has been reported so far. For the first time, the positive effect deriving from the engineering of the microscopic nano/microstructure and of the macroscopic meta-structure of the absorber on the permittivity and EM absorption performance is proposed. Integration of outstanding mechanical strength and ultra-broad EAB is innovatively realized through a multi-scale design route. This work provides new insights for the design of advanced ceramic-based metamaterials with outstanding performance under extreme environment. |
| Freie Schlagworte: | additive manufacturing; mechanical strength; meta; materials; MoS2; PyC-Al2O3; multi-loss mechanism CHEMICAL-VAPOR INFILTRATION; DIELECTRIC-PROPERTIES; MECHANICAL-PROPERTIES; 3D; LIGHTWEIGHTCOMPOSITES; MOS2 |
| Zusätzliche Informationen: | Artikel-ID: 2300664 |
| Fachbereich(e)/-gebiet(e): | 11 Fachbereich Material- und Geowissenschaften 11 Fachbereich Material- und Geowissenschaften > Materialwissenschaft 11 Fachbereich Material- und Geowissenschaften > Materialwissenschaft > Fachgebiet Disperse Feststoffe 11 Fachbereich Material- und Geowissenschaften > Materialwissenschaft > Werkstofftechnik und Ressourcenmanagement |
| Hinterlegungsdatum: | 22 Aug 2023 11:26 |
| Letzte Änderung: | 22 Aug 2023 11:26 |
| PPN: | 510769098 |
| Export: | |
| Suche nach Titel in: | TUfind oder in Google |
 |
Frage zum Eintrag |
Optionen (nur für Redakteure)
 |
Redaktionelle Details anzeigen |
Drucken
Impressum