Kreß, Antonio ; Steinmeyer, Maximilian ; Longard, Lukas ; Kaiser, Joscha ; Metternich, Joachim (2023)
A product selection method for the configuration of learning factories.
12th Conference on Learning Factories (CLF 2022). Singapore (11.-13.04.2022)
doi: 10.26083/tuprints-00024355
Konferenzveröffentlichung, Zweitveröffentlichung, Verlagsversion
Kurzbeschreibung (Abstract)
A structured and systematic process plays an important role for the learning factory design. Especially the technical configuration of a learning factory determines its future application possibilities in research, training, and teaching. As part of the technical configuration, the selection of a product that best fits the set objectives is a challenge. This publication presents a method for the selection of products in learning factories. In the method, three successive phases are distinguished: in phase 1, the primary goals of a learning factory are defined and detailed into intended competencies and research targets. Next, in phase 2, the product and production requirements are derived, which are mutually dependent. A distinction is made between mandatory and optional requirements. While, the identified mandatory requirements allow a preselection of possible products, the optional requirements are used to evaluate these preselected products. Based on the preselection, in phase 3 the most suitable product can be identified that best meets the optional requirements.
| Typ des Eintrags: | Konferenzveröffentlichung |
|---|---|
| Erschienen: | 2023 |
| Autor(en): | Kreß, Antonio ; Steinmeyer, Maximilian ; Longard, Lukas ; Kaiser, Joscha ; Metternich, Joachim |
| Art des Eintrags: | Zweitveröffentlichung |
| Titel: | A product selection method for the configuration of learning factories |
| Sprache: | Englisch |
| Publikationsjahr: | 2023 |
| Ort: | Darmstadt |
| Verlag: | SSRN - Elsevier |
| Buchtitel: | Proceedings of the 12th Conference on Learning Factories (CLF 2022) |
| Kollation: | 3 Seiten |
| Veranstaltungstitel: | 12th Conference on Learning Factories (CLF 2022) |
| Veranstaltungsort: | Singapore |
| Veranstaltungsdatum: | 11.-13.04.2022 |
| DOI: | 10.26083/tuprints-00024355 |
| URL / URN: | https://tuprints.ulb.tu-darmstadt.de/24355 |
| Zugehörige Links: | |
| Herkunft: | Zweitveröffentlichungsservice |
| Kurzbeschreibung (Abstract): | A structured and systematic process plays an important role for the learning factory design. Especially the technical configuration of a learning factory determines its future application possibilities in research, training, and teaching. As part of the technical configuration, the selection of a product that best fits the set objectives is a challenge. This publication presents a method for the selection of products in learning factories. In the method, three successive phases are distinguished: in phase 1, the primary goals of a learning factory are defined and detailed into intended competencies and research targets. Next, in phase 2, the product and production requirements are derived, which are mutually dependent. A distinction is made between mandatory and optional requirements. While, the identified mandatory requirements allow a preselection of possible products, the optional requirements are used to evaluate these preselected products. Based on the preselection, in phase 3 the most suitable product can be identified that best meets the optional requirements. |
| Freie Schlagworte: | learning factory design, design approach, technical configuration, factory of the future, decision making |
| Status: | Verlagsversion |
| URN: | urn:nbn:de:tuda-tuprints-243554 |
| Sachgruppe der Dewey Dezimalklassifikatin (DDC): | 600 Technik, Medizin, angewandte Wissenschaften > 620 Ingenieurwissenschaften und Maschinenbau 600 Technik, Medizin, angewandte Wissenschaften > 670 Industrielle und handwerkliche Fertigung |
| Fachbereich(e)/-gebiet(e): | 16 Fachbereich Maschinenbau 16 Fachbereich Maschinenbau > Institut für Produktionsmanagement und Werkzeugmaschinen (PTW) 16 Fachbereich Maschinenbau > Institut für Produktionsmanagement und Werkzeugmaschinen (PTW) > CiP Center für industrielle Produktivität |
| Hinterlegungsdatum: | 25 Jul 2023 13:03 |
| Letzte Änderung: | 26 Jul 2023 05:36 |
| PPN: | |
| Zugehörige Links: | |
| Export: | |
| Suche nach Titel in: | TUfind oder in Google |
 |
Frage zum Eintrag |
Optionen (nur für Redakteure)
 |
Redaktionelle Details anzeigen |
Drucken
Impressum