Yang, Yangyiwei ; Doñate-Buendía, Carlos ; Oyedeji, Timileyin David ; Gökce, Bilal ; Xu, Bai-Xiang (2021)
Nanoparticle Tracing during Laser Powder Bed Fusion of Oxide Dispersion Strengthened Steels.
In: Materials, 2021, 14 (13)
doi: 10.26083/tuprints-00019391
Artikel, Zweitveröffentlichung, Verlagsversion
Es ist eine neuere Version dieses Eintrags verfügbar. |
Kurzbeschreibung (Abstract)
The control of nanoparticle agglomeration during the fabrication of oxide dispersion strengthened steels is a key factor in maximizing their mechanical and high temperature reinforcement properties. However, the characterization of the nanoparticle evolution during processing represents a challenge due to the lack of experimental methodologies that allow in situ evaluation during laser powder bed fusion (LPBF) of nanoparticle-additivated steel powders. To address this problem, a simulation scheme is proposed to trace the drift and the interactions of the nanoparticles in the melt pool by joint heat-melt-microstructure–coupled phase-field simulation with nanoparticle kinematics. Van derWaals attraction and electrostatic repulsion with screened-Coulomb potential are explicitly employed to model the interactions with assumptions made based on reported experimental evidence. Numerical simulations have been conducted for LPBF of oxide nanoparticle-additivated PM2000 powder considering various factors, including the nanoparticle composition and size distribution. The obtained results provide a statistical and graphical demonstration of the temporal and spatial variations of the traced nanoparticles, showing ~55% of the nanoparticles within the generated grains, and a smaller fraction of ~30% in the pores, ~13% on the surface, and ~2% on the grain boundaries. To prove the methodology and compare it with experimental observations, the simulations are performed for LPBF of a 0.005 wt % yttrium oxide nanoparticle-additivated PM2000 powder and the final degree of nanoparticle agglomeration and distribution are analyzed with respect to a series of geometric and material parameters.
Typ des Eintrags: | Artikel |
---|---|
Erschienen: | 2021 |
Autor(en): | Yang, Yangyiwei ; Doñate-Buendía, Carlos ; Oyedeji, Timileyin David ; Gökce, Bilal ; Xu, Bai-Xiang |
Art des Eintrags: | Zweitveröffentlichung |
Titel: | Nanoparticle Tracing during Laser Powder Bed Fusion of Oxide Dispersion Strengthened Steels |
Sprache: | Englisch |
Publikationsjahr: | 2021 |
Publikationsdatum der Erstveröffentlichung: | 2021 |
Verlag: | MDPI |
Titel der Zeitschrift, Zeitung oder Schriftenreihe: | Materials |
Jahrgang/Volume einer Zeitschrift: | 14 |
(Heft-)Nummer: | 13 |
Kollation: | 24 Seiten |
DOI: | 10.26083/tuprints-00019391 |
URL / URN: | https://tuprints.ulb.tu-darmstadt.de/19391 |
Zugehörige Links: | |
Herkunft: | Zweitveröffentlichung aus gefördertem Golden Open Access |
Kurzbeschreibung (Abstract): | The control of nanoparticle agglomeration during the fabrication of oxide dispersion strengthened steels is a key factor in maximizing their mechanical and high temperature reinforcement properties. However, the characterization of the nanoparticle evolution during processing represents a challenge due to the lack of experimental methodologies that allow in situ evaluation during laser powder bed fusion (LPBF) of nanoparticle-additivated steel powders. To address this problem, a simulation scheme is proposed to trace the drift and the interactions of the nanoparticles in the melt pool by joint heat-melt-microstructure–coupled phase-field simulation with nanoparticle kinematics. Van derWaals attraction and electrostatic repulsion with screened-Coulomb potential are explicitly employed to model the interactions with assumptions made based on reported experimental evidence. Numerical simulations have been conducted for LPBF of oxide nanoparticle-additivated PM2000 powder considering various factors, including the nanoparticle composition and size distribution. The obtained results provide a statistical and graphical demonstration of the temporal and spatial variations of the traced nanoparticles, showing ~55% of the nanoparticles within the generated grains, and a smaller fraction of ~30% in the pores, ~13% on the surface, and ~2% on the grain boundaries. To prove the methodology and compare it with experimental observations, the simulations are performed for LPBF of a 0.005 wt % yttrium oxide nanoparticle-additivated PM2000 powder and the final degree of nanoparticle agglomeration and distribution are analyzed with respect to a series of geometric and material parameters. |
Status: | Verlagsversion |
URN: | urn:nbn:de:tuda-tuprints-193919 |
Zusätzliche Informationen: | Keywords: additive manufacturing; laser powder bed fusion; selective laser melting; oxide dispersion strengthened steel; phase-field model; finite element simulation; nanoparticle interaction |
Sachgruppe der Dewey Dezimalklassifikatin (DDC): | 600 Technik, Medizin, angewandte Wissenschaften > 620 Ingenieurwissenschaften und Maschinenbau |
Fachbereich(e)/-gebiet(e): | 11 Fachbereich Material- und Geowissenschaften 11 Fachbereich Material- und Geowissenschaften > Materialwissenschaft 11 Fachbereich Material- und Geowissenschaften > Materialwissenschaft > Fachgebiet Funktionale Materialien |
Hinterlegungsdatum: | 30 Aug 2021 12:19 |
Letzte Änderung: | 06 Sep 2021 05:53 |
PPN: | |
Export: | |
Suche nach Titel in: | TUfind oder in Google |
Verfügbare Versionen dieses Eintrags
- Nanoparticle Tracing during Laser Powder Bed Fusion of Oxide Dispersion Strengthened Steels. (deposited 30 Aug 2021 12:19) [Gegenwärtig angezeigt]
Frage zum Eintrag |
Optionen (nur für Redakteure)
Redaktionelle Details anzeigen |