Franceschi, Alessandro ; Jäger, Fabian ; Hoche, Holger ; Oechsner, Matthias ; Groche, Peter (2021)
Calibration of the residual stresses with an active die during the ejection phase of cold extrusion.
In: International Journal of Material Forming, 14 (2)
doi: 10.1007/s12289-020-01572-x
Artikel, Bibliographie
Dies ist die neueste Version dieses Eintrags.
Kurzbeschreibung (Abstract)
The resulting tensile residual stresses on the surface of cold full-forward extruded parts are unfavorable for the fatigue life of these parts. The final stress state is determined by the combination of two process stages: forming and ejection. This is due to the fact that the workpiece undergoes a second plastic deformation after forming during the ejection from the die. So far, literature is focusing mainly on the identification of the parameters affecting the residual stresses during the first stage. In the present paper, the attention is drawn to the ejection phase during cold extrusion of workpieces made out of the austenitic stainless steel AISI 316 L. First of all, a system consisting of an active die is presented. This technology allows the control of the applied pre-stress on the die during the process. It is experimentally and numerically demonstrated that a significant shift of the residual stress state in the near-surface region can be achieved. Even compressive axial and tangential residual stresses can be induced in this area. Also the limits of this system are numerically investigated. It is observed that a different deformation mechanism occurs above a certain pre-stress level. Finally, an analytical model is created and observations are presented relatively to the mechanisms that influence the plastic deformation during ejection.
| Typ des Eintrags: | Artikel |
|---|---|
| Erschienen: | 2021 |
| Autor(en): | Franceschi, Alessandro ; Jäger, Fabian ; Hoche, Holger ; Oechsner, Matthias ; Groche, Peter |
| Art des Eintrags: | Bibliographie |
| Titel: | Calibration of the residual stresses with an active die during the ejection phase of cold extrusion |
| Sprache: | Englisch |
| Publikationsjahr: | 1 März 2021 |
| Ort: | Paris |
| Verlag: | Springer |
| Titel der Zeitschrift, Zeitung oder Schriftenreihe: | International Journal of Material Forming |
| Jahrgang/Volume einer Zeitschrift: | 14 |
| (Heft-)Nummer: | 2 |
| DOI: | 10.1007/s12289-020-01572-x |
| URL / URN: | https://link.springer.com/article/10.1007/s12289-020-01572-x... |
| Zugehörige Links: | |
| Kurzbeschreibung (Abstract): | The resulting tensile residual stresses on the surface of cold full-forward extruded parts are unfavorable for the fatigue life of these parts. The final stress state is determined by the combination of two process stages: forming and ejection. This is due to the fact that the workpiece undergoes a second plastic deformation after forming during the ejection from the die. So far, literature is focusing mainly on the identification of the parameters affecting the residual stresses during the first stage. In the present paper, the attention is drawn to the ejection phase during cold extrusion of workpieces made out of the austenitic stainless steel AISI 316 L. First of all, a system consisting of an active die is presented. This technology allows the control of the applied pre-stress on the die during the process. It is experimentally and numerically demonstrated that a significant shift of the residual stress state in the near-surface region can be achieved. Even compressive axial and tangential residual stresses can be induced in this area. Also the limits of this system are numerically investigated. It is observed that a different deformation mechanism occurs above a certain pre-stress level. Finally, an analytical model is created and observations are presented relatively to the mechanisms that influence the plastic deformation during ejection. |
| Freie Schlagworte: | Residual stresses, Full-forward extrusion, Cold forming, Finite elements |
| Zusätzliche Informationen: | first published online 18. August 2020 |
| Fachbereich(e)/-gebiet(e): | 16 Fachbereich Maschinenbau 16 Fachbereich Maschinenbau > Institut für Produktionstechnik und Umformmaschinen (PtU) |
| Hinterlegungsdatum: | 19 Aug 2021 06:03 |
| Letzte Änderung: | 19 Dez 2024 12:49 |
| PPN: | 524853991 |
| Export: | |
| Suche nach Titel in: | TUfind oder in Google |
Verfügbare Versionen dieses Eintrags
-
Calibration of the residual stresses with an active die during the ejection phase of cold extrusion. (deposited 18 Dez 2024 13:01)
- Calibration of the residual stresses with an active die during the ejection phase of cold extrusion. (deposited 19 Aug 2021 06:03) [Gegenwärtig angezeigt]
 |
Frage zum Eintrag |
Optionen (nur für Redakteure)
 |
Redaktionelle Details anzeigen |
Drucken
Impressum