TU Darmstadt / ULB / TUbiblio

Steady-state Thermal Analysis of the Contact in Bearings Exposed to Electrical Currents

Safdarzadeh, Omid ; Weicker, Martin ; Binder, Andreas (2021)
Steady-state Thermal Analysis of the Contact in Bearings Exposed to Electrical Currents.
47th Annual Conference of the IEEE Industrial Electronics Society. Toronto, Canada (13.10.2021-16.10.2021)
doi: 10.1109/IECON48115.2021.9589748
Konferenzveröffentlichung, Bibliographie

Kurzbeschreibung (Abstract)

Electrical bearing currents, e.g. in inverted-fed electrical machines, may disturb the performance of the bearings. In this paper the steady-state temperature of the bearing surface at the electrical contact point between the balls and the raceway is derived in the mixed lubrication state. The thermal analysis is presented based on the Holm‘s electric contact model, namely the a-spot. The contact model of Andreason is presented as well for comparison. The results are extended to predict the instantaneous contact surface temperature in an axial bearing (type 51208) at 500 rpm with 1 A average bearing current and with an axial bearing force of 800 N. Moreover the average of the contact surface temperature is obtained for the same bearing in a range of operating points, i.e. a rotating speed from 0 rpm to 3000 rpm, a bearing average current from 0.25 A to 3 A, at an axial bearing force 800 N. The results can be utilized to predict the contact temperature on the bearing surface for any given bearing from the measured bearing voltage.

Typ des Eintrags: Konferenzveröffentlichung
Erschienen: 2021
Autor(en): Safdarzadeh, Omid ; Weicker, Martin ; Binder, Andreas
Art des Eintrags: Bibliographie
Titel: Steady-state Thermal Analysis of the Contact in Bearings Exposed to Electrical Currents
Sprache: Englisch
Publikationsjahr: 10 November 2021
Ort: Piscataway, NJ
Verlag: IEEE
Buchtitel: IECON 2021 - 47th Annual Conference of the IEEE Industrial Electronics Society
Veranstaltungstitel: 47th Annual Conference of the IEEE Industrial Electronics Society
Veranstaltungsort: Toronto, Canada
Veranstaltungsdatum: 13.10.2021-16.10.2021
DOI: 10.1109/IECON48115.2021.9589748
Kurzbeschreibung (Abstract):

Electrical bearing currents, e.g. in inverted-fed electrical machines, may disturb the performance of the bearings. In this paper the steady-state temperature of the bearing surface at the electrical contact point between the balls and the raceway is derived in the mixed lubrication state. The thermal analysis is presented based on the Holm‘s electric contact model, namely the a-spot. The contact model of Andreason is presented as well for comparison. The results are extended to predict the instantaneous contact surface temperature in an axial bearing (type 51208) at 500 rpm with 1 A average bearing current and with an axial bearing force of 800 N. Moreover the average of the contact surface temperature is obtained for the same bearing in a range of operating points, i.e. a rotating speed from 0 rpm to 3000 rpm, a bearing average current from 0.25 A to 3 A, at an axial bearing force 800 N. The results can be utilized to predict the contact temperature on the bearing surface for any given bearing from the measured bearing voltage.

Fachbereich(e)/-gebiet(e): 18 Fachbereich Elektrotechnik und Informationstechnik
18 Fachbereich Elektrotechnik und Informationstechnik > Institut für Elektrische Energiewandlung > Elektrische Energiewandlung
18 Fachbereich Elektrotechnik und Informationstechnik > Institut für Elektrische Energiewandlung
Hinterlegungsdatum: 07 Nov 2022 10:34
Letzte Änderung: 02 Mär 2023 14:59
PPN: 50542360X
Export:
Suche nach Titel in: TUfind oder in Google
Frage zum Eintrag Frage zum Eintrag

Optionen (nur für Redakteure)
Redaktionelle Details anzeigen Redaktionelle Details anzeigen