Peters, Jens ; Alobaid, Falah ; Epple, Bernd (2021)
Operational Flexibility of a CFB Furnace during Fast Load Change—Experimental Measurements and Dynamic Model.
In: Applied Sciences, 2020, 10 (17)
doi: 10.26083/tuprints-00018641
Artikel, Zweitveröffentlichung, Verlagsversion
 | Es ist eine neuere Version dieses Eintrags verfügbar. |
Kurzbeschreibung (Abstract)
The share of power from fluctuating renewable energies such as wind and solar is increasing due to the ongoing climate change. It is therefore essential to use technologies that can compensate for these fluctuations. Experiments at 1 MWth scale were carried out to evaluate the operational flexibility of a circulating fluidized bed (CFB) combustor during transient operation from 60% to 100% load. A typical load following sequence for fluctuating electricity generation/demand was reproduced experimentally by performing 4 load changes. The hydrodynamic condition after a load change depends on if the load change was in positive or negative direction due to the heat stored in the refractory/bed material at high loads and released when the load decreases. A 1.5D-process simulation model was created in the software APROS (Advanced Process Simulation) with the target of showing the specific characteristics of a CFB furnace during load following operation. The model was tuned with experimental data of a steady-state test point and validated with the load cycling tests. The simulation results show the key characteristics of CFB combustion with reasonable accuracy. Detailed experimental data is presented and a core-annulus approach for the modeling of the CFB furnace is used.
| Typ des Eintrags: | Artikel |
|---|---|
| Erschienen: | 2021 |
| Autor(en): | Peters, Jens ; Alobaid, Falah ; Epple, Bernd |
| Art des Eintrags: | Zweitveröffentlichung |
| Titel: | Operational Flexibility of a CFB Furnace during Fast Load Change—Experimental Measurements and Dynamic Model |
| Sprache: | Englisch |
| Publikationsjahr: | 2021 |
| Publikationsdatum der Erstveröffentlichung: | 2020 |
| Titel der Zeitschrift, Zeitung oder Schriftenreihe: | Applied Sciences |
| Jahrgang/Volume einer Zeitschrift: | 10 |
| (Heft-)Nummer: | 17 |
| Kollation: | 26 Seiten |
| DOI: | 10.26083/tuprints-00018641 |
| URL / URN: | https://tuprints.ulb.tu-darmstadt.de/18641 |
| Zugehörige Links: | |
| Herkunft: | Zweitveröffentlichung aus gefördertem Golden Open Access |
| Kurzbeschreibung (Abstract): | The share of power from fluctuating renewable energies such as wind and solar is increasing due to the ongoing climate change. It is therefore essential to use technologies that can compensate for these fluctuations. Experiments at 1 MWth scale were carried out to evaluate the operational flexibility of a circulating fluidized bed (CFB) combustor during transient operation from 60% to 100% load. A typical load following sequence for fluctuating electricity generation/demand was reproduced experimentally by performing 4 load changes. The hydrodynamic condition after a load change depends on if the load change was in positive or negative direction due to the heat stored in the refractory/bed material at high loads and released when the load decreases. A 1.5D-process simulation model was created in the software APROS (Advanced Process Simulation) with the target of showing the specific characteristics of a CFB furnace during load following operation. The model was tuned with experimental data of a steady-state test point and validated with the load cycling tests. The simulation results show the key characteristics of CFB combustion with reasonable accuracy. Detailed experimental data is presented and a core-annulus approach for the modeling of the CFB furnace is used. |
| Status: | Verlagsversion |
| URN: | urn:nbn:de:tuda-tuprints-186415 |
| Sachgruppe der Dewey Dezimalklassifikatin (DDC): | 600 Technik, Medizin, angewandte Wissenschaften > 600 Technik |
| Fachbereich(e)/-gebiet(e): | 16 Fachbereich Maschinenbau 16 Fachbereich Maschinenbau > Institut für Energiesysteme und Energietechnik (EST) |
| Hinterlegungsdatum: | 30 Jul 2021 08:01 |
| Letzte Änderung: | 03 Aug 2021 05:55 |
| PPN: | |
| Export: | |
| Suche nach Titel in: | TUfind oder in Google |
Verfügbare Versionen dieses Eintrags
- Operational Flexibility of a CFB Furnace during Fast Load Change—Experimental Measurements and Dynamic Model. (deposited 30 Jul 2021 08:01) [Gegenwärtig angezeigt]
 |
Frage zum Eintrag |
Optionen (nur für Redakteure)
 |
Redaktionelle Details anzeigen |
Drucken
Impressum