TU Darmstadt / ULB / TUbiblio

3D Numerical Simulation of a Laminar Experimental SWQ Burner with Tabulated Chemistry

Heinrich, A. ; Ganter, S. ; Kuenne, G. ; Jainski, C. ; Dreizler, A. ; Janicka, J. (2018)
3D Numerical Simulation of a Laminar Experimental SWQ Burner with Tabulated Chemistry.
In: Flow Turbulence and Combustion, 100 (2)
doi: 10.1007/s10494-017-9851-9
Artikel, Bibliographie

Kurzbeschreibung (Abstract)

Flame-wall interaction (FWI) plays an important role in enclosed combustion systems. For avoiding the complexity of close to reality combustors, in this study an atmospheric premixed V-shaped flame interacting with an isothermal cold wall in a side wall quenching (SWQ) configuration is investigated. A stoichiometric methane/air mixture is used as fuel. A three-dimensional (3D) numerical simulation, which resolves all flow structures is combined with a tabulated chemistry approach (flamelet generated manifold, FGM). Results are compared with experimental data and two-dimensional simulations. The FGM approach is a suitable trade-off between computationally expensive detailed chemistry simulations and over simplified single step mechanisms. 2D simulations are used to investigate the influence of the uncertainty of the wall temperature, to show that the resolution in 3D is sufficient and that the influence of the flame thickening on the wall heat fluxes can be determined. Our results show that the 3D FGM approach is in close agreement to experimentally obtained flow and temperature fields. The dimensionless wall heat flux and P,clet number matches the expected values of 0.16 and 7, respectively. However, during FWI the measured CO mole fractions are not reproduced accurately showing that the transported variables in the present approach of tabulated chemistry do not recover premixed flame structures near walls.

Typ des Eintrags: Artikel
Erschienen: 2018
Autor(en): Heinrich, A. ; Ganter, S. ; Kuenne, G. ; Jainski, C. ; Dreizler, A. ; Janicka, J.
Art des Eintrags: Bibliographie
Titel: 3D Numerical Simulation of a Laminar Experimental SWQ Burner with Tabulated Chemistry
Sprache: Englisch
Publikationsjahr: 2018
Verlag: Springer
Titel der Zeitschrift, Zeitung oder Schriftenreihe: Flow Turbulence and Combustion
Jahrgang/Volume einer Zeitschrift: 100
(Heft-)Nummer: 2
DOI: 10.1007/s10494-017-9851-9
Kurzbeschreibung (Abstract):

Flame-wall interaction (FWI) plays an important role in enclosed combustion systems. For avoiding the complexity of close to reality combustors, in this study an atmospheric premixed V-shaped flame interacting with an isothermal cold wall in a side wall quenching (SWQ) configuration is investigated. A stoichiometric methane/air mixture is used as fuel. A three-dimensional (3D) numerical simulation, which resolves all flow structures is combined with a tabulated chemistry approach (flamelet generated manifold, FGM). Results are compared with experimental data and two-dimensional simulations. The FGM approach is a suitable trade-off between computationally expensive detailed chemistry simulations and over simplified single step mechanisms. 2D simulations are used to investigate the influence of the uncertainty of the wall temperature, to show that the resolution in 3D is sufficient and that the influence of the flame thickening on the wall heat fluxes can be determined. Our results show that the 3D FGM approach is in close agreement to experimentally obtained flow and temperature fields. The dimensionless wall heat flux and P,clet number matches the expected values of 0.16 and 7, respectively. However, during FWI the measured CO mole fractions are not reproduced accurately showing that the transported variables in the present approach of tabulated chemistry do not recover premixed flame structures near walls.

Freie Schlagworte: FGM; Flame wall interaction; Laminar; Methane; SWQ
Fachbereich(e)/-gebiet(e): 16 Fachbereich Maschinenbau
16 Fachbereich Maschinenbau > Fachgebiet für Energie- und Kraftwerkstechnik (EKT)
16 Fachbereich Maschinenbau > Fachgebiet Reaktive Strömungen und Messtechnik (RSM)
Hinterlegungsdatum: 27 Mär 2019 06:19
Letzte Änderung: 27 Mär 2019 06:19
PPN:
Export:
Suche nach Titel in: TUfind oder in Google
Frage zum Eintrag Frage zum Eintrag

Optionen (nur für Redakteure)
Redaktionelle Details anzeigen Redaktionelle Details anzeigen