Funieru, Bogdan ; Binder, Andreas (2015)
Simulation of Electrical Machines End Effects with Reduced Length 3D FEM Models.
ICEM 2012. Marseille, France (2-4.9.2012)
Conference or Workshop Item

Munteanu, G. ; Binder, Andreas ; Schneider, T. ; Funieru, Bogdan (2015)
No-load tests of a 40 kW High-Speed Bearingless Permanent Magnet Synchronous Motor.
20th Int. Symp. On Power Electronics, Ele. Drives, Automation and Motion SPEEDAM 2010. Pisa, Italy (14.-16. June 2010)
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2014)
3D numerical calculation method of electrical machines with time efficient air gap coupling and stabilized torque and force calculation.
Proceedings of the International Conference on Electrical Machines (ICEM). Berlin (3.-5. Sept. 2014)
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2013)
Design of a PM Direct Drive Synchronous Generator used in a Tidal Stream Turbine.
Proc. of the Int. Conf. Clean Electrical Power (IEEE-ICCEP). Alghero, Sardegna, Italy (11.-13. 6. 2013)
Conference or Workshop Item

Funieru, Bogdan ; Esteves-Albieri, G. ; Binder, Andreas (2013)
Design of a Reduced Size Demonstrator Used for Validation of the Direct Drive Wind Generator Loss Calculation Models.
In: Electromotion, 20
Article

Mirzaei, M. ; Binder, Andreas ; Funieru, Bogdan ; Susic, M. (2012)
Analytical Calculations of Induced Eddy Currents Losses in the Magnets of Surface Mounted PM Machines with Consideration of Circumferential and Axial Segmentation Effects.
In: IEEE Trans. on Magnetics 48, 12
Article

Mirzaei, M. ; Funieru, Bogdan ; Binder, Andreas (2011)
Analysis of contact resistance effect between magnet segments on eddy current losses.
Proc. of the 8th Int. Conf. on Computation in Electromagnetics CEM 2011. Wroclaw, Poland (11-14.4.2011)
Conference or Workshop Item

Binder, Andreas ; Funieru, Bogdan ; Mirzaei, M. ; Zamzow, B. ; Waidhauser, R. (2011)
Forces Analysis in a Large Linear Synchronous Motor.
8th Int. Symp. On Linear Drives for Industry Application LDIA 2011. Eindhoven, Netherlands (3.-6.7.2011)
Conference or Workshop Item

Funieru, Bogdan ; Mirzaei, M. ; Binder, Andreas (2011)
Full and Simplified Loss Calculation FEM Models for Segmented Surface Permanent Magnet Machines.
Proc. of the Int. Conf. COMPUMAG. Sydney, Australia (12.-15.7.2011)
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2010)
Simulation of the Air gap in 3D Models of Electrical machines.
Proc. of the 14th Int. IGTE Symposium on Numerical Field Calculation in Electrical Engineering. Graz, Austria (19.-22.9.2010)
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2010)
Simulation of the Air gap in 3D Models of Electrical machines.
Proc. of the 14th Int. IGTE Symposium on Numerical Field Calculation in Electrical Engineering. Graz, Austria (19.-22.9.2010)
Conference or Workshop Item

Gholizad, H. ; Funieru, Bogdan ; Binder, Andreas (2009)
Direct Modeling of Motional Eddy Currents in Highly Saturated Solid Conductors by Magnetic Equivalent Circuit Method.
In: IEEE Trans. on Magnetics, 45 (3)
Article

Funieru, Bogdan (2008)
Design and optimization of a linear DC actuator used as tractive effort booster in railway applications.
TU Darmstadt
Ph.D. Thesis

Funieru, Bogdan ; Binder, A. (2007)
Analysis of the force output and generated losses of a linear DC actuator supplied with a power electronic converter.
Conference or Workshop Item

Binder, A. ; Funieru, Bogdan ; Knopik, Th. ; Güllich, P. (2007)
Ausnutzung der Eisenremanenz zur Positionserfassung beim Auswuichten von Kleinrotoren.
Conference or Workshop Item

Funieru, Bogdan ; Binder, A. (2007)
Design of a linear transversal flux DC actuator used for railway applications.
Conference or Workshop Item

Funieru, Bogdan ; Binder, A. (2007)
Losses and forces due to eddy currents in a magnetically non-linear conductive half space.
In: Electrical Engineering (Archiv für Elektrotechnik), 90
Article

Gholizad, H. ; Funieru, Bogdan ; Binder, A. ; Mirsalim, M. (2007)
A modified magnetic equivalent circuit method for calculating the motional eddy current.
Conference or Workshop Item

Cui, X. ; Funieru, Bogdan ; Binder, A. (2006)
Calculation of No-Load Additional Losses in the Rotor of StrafloMatrixTM Synchronous Turbine-Generators.
Conference or Workshop Item

Cui, X. ; Funieru, Bogdan ; Binder, A. (2006)
PM Generator No-Load Additional Loss Calculation Using FE Models with an Equivalent Current Layer.
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2005)
Comparison of measurements and calculations of a DC linear actuator designed for railway applications.
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2005)
Linear DC actuator used as a tractive effort booster for wheel-grip loss situation.
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2004)
Designing of an electromagnetic actuator for railway applications using FE programs.
Conference or Workshop Item

Funieru, Bogdan ; Werle, Thomas (2003)
Force generation and magnetic stray flux of linear DC actuator for electric traction applications.
Conference or Workshop Item