Blättern nach Person
Ebene hoch |
Song, X. ; Rettenmayr, Markus ; Exner, Hans Eckart ; Liu, G. (2004)
Combined Monte-Carlo/deterministic model of recrystallization and recovery.
In: Recrystallization and grain growth. Hrsg.: G. Gottstein, D.A. Molodov. -
Buchkapitel, Bibliographie
Exner, Hans Eckart ; Rettenmayr, Markus (2003)
Komplexe Grenzflächengeometrien bei Phasenumwandlungen.
Konferenzveröffentlichung, Bibliographie
Müller, Clemens ; Burghardt, Bettina ; Exner, Hans Eckart (2003)
Methode zur Berechnung der Rissausbreitung in Gradientengefügen.
Konferenzveröffentlichung, Bibliographie
Thomas, Sven ; Jung, Stefan ; Nimz, Michael ; Müller, Clemens ; Groche, Peter ; Exner, Hans Eckart (2003)
Models and experiments describing deformation, roughness and damage in metal forming.
In: Deformation and failure in metallic materials
Buchkapitel, Bibliographie
Wintrich, Klaus ; Thomas, Sven ; Müller, Clemens ; Exner, Hans Eckart (2002)
Quantitative investigation of damage in a single crystal superalloy.
Konferenzveröffentlichung, Bibliographie
Exner, Hans Eckart (2001)
Quantitative Metallographie in drei Dimensionen = Quantitative metallography in three dimensions.
In: Praktische Metallographie / Practical metallography, 38
Artikel, Bibliographie
Exner, Hans Eckart ; Müller, C. ; Wincierz, C. ; Broszeit, E. (2000)
Effects of microstructure on wear of aluminium bearing alloys with systematic variation of hard and soft phases.
In: Materialwissenschaft und Werkstofftechnik, 31
Artikel, Bibliographie
Exner, Hans Eckart (1999)
Metallographie: Metallkundliches Untersuchungsverfahren oder die Wissenschaft von der Beschreibung der Metalle.
In: Practical Metallography / Praktische Metallographie, 36 (3)
Artikel, Bibliographie
Exner, Hans Eckart ; Müller, C. ; Schmidt, H. (1999)
Titan in der Gelenk- und Zahnprothetik: Verschleiß und Ermüdung als lebensdauerbegrenzende Faktoren.
In: Thema Forschung
Artikel, Bibliographie
Exner, Hans Eckart ; Spaepen, F. (1998)
Metals and alloys: computer modelling - indispensible tool for present development or long-term playground for specialists ?
In: Current opinion in solid state and materials science. 3 (1998), S. 261-263
Artikel, Bibliographie
Exner, Hans Eckart ; Rettenmayr, M. (1997)
Applications of image analysis for the quantitative characterisation of microstructural defects in materials.
Konferenzveröffentlichung, Bibliographie
Exner, Hans Eckart (1996)
Qualitative and quantitative surface microscopy.
In: Physical metallurgy. Vol. 1. Hrsg.: R.W. Cahn. - Amsterdam: Elsevier Science, 1996. S. 943-1032
Buchkapitel, Bibliographie
Exner, Hans Eckart (1996)
Quantitative Gefügeanalyse und Werkstoffverhalten.
In: Praktische Metallographie. 33 (1996), S. 605-617
Artikel, Bibliographie
Exner, Hans Eckart ; Arzt, E. (1996)
Sintering processes.
In: Physical metallurgy. Vol. 3. Hrsg.: R.W. Cahn. S. 2662-2677. - Amsterdam: Elsevier Science, 1996
Buchkapitel, Bibliographie
Exner, Hans Eckart (1996)
Understanding the toughness and strength of WC-Co hardmetals.
In: Advances in hard metal production. - Bellstone, UK: European Powder Metallurgy Ass., 1996. S. 255-262
Buchkapitel, Bibliographie
Exner, Hans Eckart (1995)
Quantitative Gefügeanalyse und Werkstoffverhalten.
In: Praktische Metallographie: Sonderbd. 26 (1995), S. 49-49
Artikel, Bibliographie
Exner, Hans Eckart (1995)
Trends of modelling in materials science.
In: Verbundwerkstofforschung: Wissenschaft und Praxis. Hrsg.: J. Bossert u.a. S. 313-316, Auflage: Renningen-Malmsheim: Expert, 1995
Buchkapitel, Bibliographie