A

Albus, Svenja ; Nowottny, Jonas ; Sartorius, Jana ; Busch, Markus (2023)
Applications of transitiometry: determination of thermophysical properties and decomposition kinetics of peroxide(Mixtures) under high-pressure.
In: Journal of Solution Chemistry
doi: 10.1007/s10953-023-01267-2
Article

Auernhammer, Julia ; Langhans, Markus ; Schäfer, Jan-Lukas ; Keil, Tom ; Meckel, Tobias ; Biesalski, Markus ; Stark, Robert W. (2022)
Nanomechanical subsurface characterisation of cellulosic fibres.
In: SN Applied Sciences, 4 (6)
doi: 10.1007/s42452-022-05017-9
Article

Auernhammer, Julia ; Keil, Tom ; Lin, Binbin ; Schäfer, Jan-Lukas ; Xu, Bai-Xiang ; Biesalski, Markus ; Stark, R. W. (2021)
Mapping humidity-dependent mechanical properties of a single cellulose fibre.
In: Cellulose
doi: 10.1007/s10570-021-04058-4
Article

Auernhammer, Julia ; Bell, Alena K. ; Schulze, Marcus ; Du, Yue ; Stühn, Lukas ; Wendenburg, Sonja ; Pause, Isabelle ; Biesalski, Markus ; Ensinger, Wolfgang ; Stark, Robert W. (2021)
Nanomechanical characterisation of a water-repelling terpolymer coating of cellulosic fibres.
In: Cellulose, 28 (4)
doi: 10.1007/s10570-020-03675-9
Article

Apel, Nico (2021)
Development of New Liquid Chromatographic Techniques for the Characterization of Poly(Bisphenol A Carbonate).
Technische Universität
doi: 10.26083/tuprints-00019307
Ph.D. Thesis, Primary publication, Publisher's Version

Appold, Michael (2019)
Bio-inspirierte photonische Materialien auf der Basis ultrahochmolekularer Blockcopolymere.
Technische Universität
doi: 10.25534/tuprints-00008646
Ph.D. Thesis, Primary publication

Apel, Nico (2018)
Development of New Liquid Chromatographic Techniques for the Characterization of Poly(Bisphenol A Carbonate).
Technische Universität
Ph.D. Thesis, Primary publication

Arndt, Jan-Hendrik (2016)
Beiträge zur Größencharakterisierung von Polyolefinen – Untersuchungen zu alternativen Lösungsmitteln und einer alternativen Trennmethode (HT-AF4).
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Alt, Christopher (2016)
Strategien zur Vermeidung von Kratzern in intrinsisch weichen Lackschichten.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Andrieu-Brunsen, Annette ; Micoureau, Sebastien ; Tagliazucchi, Mario ; Szleifer, Igal ; Azzaroni, Omar ; Soler-Illia, Galo J. A. A. (2015)
Mesoporous Hybrid Thin Film Membranes with P-METAC@Silica Architectures: Controlling Ionic Gating through the Tuning of Polyelectrolyte Density.
In: Chemistry of Materials, 27 (3)
Article

Ahirwal, D. ; Filipe, S. ; Neuhaus, I. ; Busch, Markus ; Schlatter, G. ; Wilhelm, M. (2014)
Large amplitude oscillatory shear and uniaxial extensional rheology of blends from linear and long-chain branched polyethylene and polypropylene.
In: Journal of Rheology, 58 (3)
doi: 10.1122/1.4867555
Article

Adler, Matthias (2011)
Analyse, Verständnis und Nutzung der Struktur-Eigenschafts-Beziehungen von thermoplastischen Polyurethanen.
TU Darmstadt
Ph.D. Thesis, Primary publication

Arras, Jürgen ; Ruppert, Dominik ; Steffan, Martin ; Shayeghi, Yalda ; Claus, Peter (2009)
Ionic liquids as reaction modifiers in the heterogeneously catalyzed selective hydrogenation of citral.
EuropaCat IX "Catalysis for a Sustainable World". Salamanca, Spanien (30. August - 04. September 2009)
Conference or Workshop Item

Albrecht, Andreas (2009)
Hochtemperatur-HPLC-FTIR von Copolymeren aus Ethylen und polaren Comonomeren.
TU Darmstadt/ Makromolekulare Chemie
Ph.D. Thesis, Primary publication

Alig, Ingo ; Bastian, Martin ; Pasch, Harald ; Rehahn, Matthias (2003)
The German Institute for Polymers (DKI) : half a century of successful polymer research in Darmstadt.
In: e-Polymers
Article

B

Brehm, Bastian (2023)
Synthese funktionaler Polymere auf Basis von Polyphosphazenen zur Herstellung elastischer Papiere.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023751
Ph.D. Thesis, Primary publication, Publisher's Version

Bareuther, Jennifer (2023)
Synthese elastomerer, kolloidaler Additive zur Herstellung neuartiger, funktionaler Papiere.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023672
Ph.D. Thesis, Primary publication, Publisher's Version

Brilmayer, Robert ; Förster, Claire ; Zhao, Lucy ; Andrieu-Brunsen, Annette (2022)
Recent trends in nanopore polymer functionalization.
In: Current Opinion in Biotechnology, 63
doi: 10.26083/tuprints-00021743
Article, Secondary publication, Postprint

Brilmayer, Robert ; Brodrecht, Martin ; Kaiser, Christoph ; Breitzke, Hergen ; Kumari, Bharti ; Wachtveitl, Josef ; Buntkowsky, Gerd ; Andrieu‐Brunsen, Annette (2021)
The Interplay of Nanoconfinement and pH from the Perspective of a Dye‐Reporter Molecule.
In: ChemNanoMat, 6 (12)
doi: 10.26083/tuprints-00019731
Article, Secondary publication, Publisher's Version

Brilmayer, Robert ; Hess, Christian ; Andrieu‐Brunsen, Annette (2021)
Influence of Chain Architecture on Nanopore Accessibility in Polyelectrolyte Block‐Co‐Oligomer Functionalized Mesopores.
In: Small, 41 (15)
doi: 10.26083/tuprints-00019924
Article, Secondary publication, Publisher's Version

Brilmayer, Robert Anton Paul (2020)
Untersuchungen zum Ladungsaufbau und pH-Wert in Silicamesoporen.
Technische Universität
doi: 10.25534/tuprints-00012828
Ph.D. Thesis, Primary publication

Brilmayer, Robert ; Förster, Claire ; Zhao, Lucy ; Andrieu-Brunsen, Annette (2020)
Recent trends in nanopore polymer functionalization.
In: Current Opinion in Biotechnology, 63
doi: 10.1016/j.copbio.2020.03.005
Article

Betz, Benjamin (2019)
Tieftemperaturoxidation von CO an Pt/CeO2-haltigen Katalysatoren : Mechanistische und reaktionstechnische Untersuchung des Einflusses einer reduktiven Aktivierung auf die Oxidationsfunktion von CO an Pt/CeO2-haltigen Katalysatoren.
TU Darmstadt
Ph.D. Thesis

Brilmayer, Robert ; Hess, Christian ; Andrieu‐Brunsen, Annette (2019)
Functionalized Nanopores: Influence of Chain Architecture on Nanopore Accessibility in Polyelectrolyte Block‐Co‐Oligomer Functionalized Mesopores.
In: Small, 15 (41)
doi: 10.1002/smll.201970220
Article

Brilmayer, Robert ; Hess, Christian ; Andrieu‐Brunsen, Annette (2019)
Influence of Chain Architecture on Nanopore Accessibility in Polyelectrolyte Block‐Co‐Oligomer Functionalized Mesopores.
In: Small, 15 (41)
doi: 10.1002/smll.201902710
Article

Bucher, Christiane (2019)
Polyphosphazene als Membranmaterialien für PEM-Brennstoffzellen: Synthesen und Charakterisierung.
Technische Universität
doi: 10.25534/tuprints-00006648
Ph.D. Thesis, Primary publication

Bergmann, Marvin (2018)
Entwicklung und Synthese von NHC-Metallkomplexen.
Technische Universität
Ph.D. Thesis, Primary publication

Bauer, Christian (2018)
Neue Verfahrensvarianten für die Hochdruck-Polyethylen-Synthese.
TU Darmstadt
Ph.D. Thesis

Breitwieser, Kevin (2018)
Entwicklung flammgeschützter Polypropylen-Formulierungen.
Technische Universität
Master Thesis, Primary publication

Budde, Felix (2018)
Development of novel nucleating and clarifying agents for polypropylene.
Technische Universität
Ph.D. Thesis, Primary publication

Böhm, A. ; Biesalski, M. (2017)
Paper-based microfluidic devices: A complex low-cost material in high-tech applications.
In: MRS Bulletin, 42 (05)
doi: 10.1557/mrs.2017.92
Article

Baaske, Matthias (2017)
Lignin amination for bio-modfied epoxy resins and evaluation of suitable charcterization methods.
TU Darmstadt
Ph.D. Thesis

Beer, Julia Katharina (2016)
Mikrostrukturaufklärung von synthetischen Polymeren durch MALDI-TOF-MS mit integrierter Hochenergie-Fragmentierungs- Zelle (HE-CID).
Technische Universität
Ph.D. Thesis, Primary publication

Bhati, Sampat Singh (2016)
Optimization and calibration of high-temperature liquid chromatographic separation of polypropylene and propylene based copolymers.
Technische Universität
Ph.D. Thesis, Primary publication

Böhm, Alexander (2015)
Grafting photo-reactive copolymers to cellulose fibers for the design of microfluidic papers.
TU Darmstadt
Ph.D. Thesis

Borukhova, S. ; Seeger, A. ; Noël, T. ; Wang, Q. ; Busch, Markus ; Hessel, V. (2015)
Pressure-Accelerated Azide-Alkyne Cycloaddition: Micro Capillary versus Autoclave Reactor Performance.
In: ChemSusChem, 8 (3)
doi: 10.1002/cssc.201403034
Article

Bohm, A. ; Carstens, F. ; Trieb, C. ; Schabel, Samuel ; Biesalski, M. (2014)
Engineering microfluidic papers: effect of fiber source and paper sheet properties on capillary-driven fluid flow.
In: Microfluidics and Nanofluidics, 16 (5)
Article

Bohm, A. ; Gattermayer, M. ; Trieb, C. ; Schabel, Samuel ; Fiedler, D. ; Miletzky, F. ; Biesalski, M. (2013)
Photo-attaching functional polymers to cellulose fibers for the design of chemically modified paper.
In: Cellulose, 20 (1)
Article

Brüggemann, O. ; Busch, Markus ; Wolf, D. (2008)
Technische Chemie 2007.
In: Nachrichten aus der Chemie, 56 (3)
doi: 10.1002/nadc.200853332
Article

Beuermann, S. ; Buback, M. ; Busch, Markus (2007)
Free-Radical Polymerization in Reactive Supercritical Fluids.
In: Chemical Synthesis using Supercritical Fluids
doi: 10.1002/9783527613687.ch16
Book Section

Busch, Markus (2006)
Kinetics and Simulation of Polymerization Reactions - from lab-scale to technical application.
Conference or Workshop Item

Ballauff, Matthias ; Blaul, Jürgen ; Guillaume, Birgit ; Rehahn, Matthias ; Traser, Steffen ; Wittemann, Matthias ; Wittmeyer, Patrick (2004)
Synthesis and Properties in Solution of rodlike polyelectrolytes.
Conference or Workshop Item

Bohrisch, Jörg ; Eisenbach, Claus D. ; Jaeger, Werner ; Mori, Hideharu ; Mueller, Axel E. ; Rehahn, Matthias ; Schaller, Christian ; Traser, Steffen ; Wittmeyer, Patrick (2004)
New Polyelectrolyte architectures.
In: Advances in Polymer Science, 165
doi: 10.1007/b11266
Article

Biesalski, M. ; Johannsmann, D. ; Ruhe, J. (2002)
Synthesis and swelling behavior of a weak polyacid brush.
In: Journal of Chemical Physics, 117 (10)
Article

Braun, Dietrich ; Langendorf, R. (2000)
Vitrigens. Part 3: Low molecular-weight glassy fulvenes.
In: Journal für praktische Chemie, 342
Article

Braun, Dietrich ; Langendorf, R. (2000)
Low molecular-weight glassy fulvenes.
In: Journal für praktische Chemie, 342
Article

Braun, Dietrich ; Elsässer, H. (2000)
Free radical terpolymerization of three non-homopolymerizable monomers, 1: Kinetic scheme.
In: Macromolecular theory and simulations, 9
Article

Braun, Dietrich ; Elsässer, H. (2000)
Free radical terpolymerization of three non-homopolymerizable monomers, 2: Terpolymerization of N-ethylmaleimide, anethol and trans-stilbene.
In: Macromolecular chemistry and physics, 201
Article

Braun, Dietrich ; Krämer, I. ; Pasch, H. (2000)
Phase separation in random copolymers from high conversion free radical copolymerization T. 4: Chemical heterogeneity analysis of poly[(methyl methacrylate)-co-(ethyl acrylate)] and poly[(methylmetacrylate)-co-(butylacrylate)] by gradient HPLC and the effect on glas transition.
In: Macromolecular chemistry and physics, 201
Article

Braun, Dietrich ; Meyer, M. I. (1999)
Phase separation in random copolymers from high conversion free radical copolymerization T. 3.
In: Die angewandte makromolekulare Chemie, 271
Article

Braun, Dietrich ; Richter, E. ; Belik, P. (1999)
Costabilisierende Verarbeitungshilfsmittel für Polyvinylchlorid.
In: Kunststoffe, 89
Article

Braun, Dietrich ; Krämer, I. ; Pasch, H. ; Mori, S. (1999)
Phase separation in random copolymers from high conversion fre radical polymerization T. 2. : Chemical heterogeneity analysis of poly(styrene-co-ethyl acrylate) by gradient HPLC.
In: Macromolecular chemistry and physics, 200
Article

Braun, Dietrich ; Wilhelm, V. ; Hellmann, G. P. (1999)
Mizellare Verstärkung von Thermoplasten.
In: Werkstoffwoche 98 - Bd. VIII: Polymere/Simulation Polymere. Hrsg.: W. Michaeli (u.a.) - Weinheim: Wiley-VCH, 1999. S. 105
Book Section

Braun, Dietrich ; Cherdron, H. ; Ritter, H. (1999)
Praktikum der makromolekularen Stoffe.
Book

Braun, Dietrich ; Langendorf, R. (1999)
Synthesis and characterization of low molecular weight organic glasses.
In: Journal für praktische Chemie, 341 (2)
Article

Braun, Dietrich ; Belik, P. ; Richter, E. (1999)
Polymeric costabilisers for poly(vinyl chloride).
In: Die angewandte makromolekulare Chemie, 268 (1)
Article

Braun, Dietrich ; Rüger, W. ; Hellmann, G. P. (1999)
Morphology and strength of elastic films of structured latices.
In: Journal of macromolecular science. B: Physics, 38 (5-6)
Article

Braun, Dietrich (1999)
Low molecular organic glass forming materials.
In: Advances in science and technology, 25
Article

Braun, Dietrich ; Richter, E. ; Rabie, S. T. ; Nada, A. A. ; Abd-El-Ghaffar, M. A. ; Yassin, A. A. (1999)
Glucoside derivatives as novel photostabilizers for rigid PVC.
In: Die angewandte makromolekulare Chemie, 271
Article

Braun, Dietrich ; Schmitt, M. W. (1998)
Functionalization of poly(propylene) by isocyanate groups.
In: Polymer bulletin. 40 (1998), S. 189-194
Article

Braun, Dietrich ; Hellmann, G. P. (1998)
Chemical modification of polymeric hydrocarbons.
Conference or Workshop Item

Braun, Dietrich ; Richter, S. ; Hellmann, G. P. ; Rätzsch, M. (1998)
Peroxy-initiated chain degradation, crosslinking and grafting in PP-PE blends.
In: Journal of applied polymer science. 68 (1998), S. 2019-2028
Article

Braun, Dietrich ; Schmiedel, B. ; Hellmann, G. P. ; Lambla, M. ; Schneider, M. (1998)
Structured latex particles based on natural rubber for high-impact polymer blends.
In: Die angewandte makromolekulare Chemie. 254 (1998), S. 79-84
Article

Braun, Dietrich ; Esser, E. ; Pasch, H. (1998)
Chromatographic investigations of macromolecules in the critical range of liquid chromatography: XII. analysis of block copolymers of styrene and butadiene.
In: International journal of polymer analysis and characterization. 4 (1998), S. 501-516
Article

Braun, Dietrich (1998)
Erkennen von Kunststoffen: Qualitative Kunststoffanalyse mit einfachen Mitteln; 3. erg. und erw. Aufl.
Book

Braun, Dietrich ; Meyer, M. I. (1998)
Phase separation in random copolymers from high conversion free radical copolymerization T. 1.
In: Macromolecular chemistry and physics. 199 (1998), S. 735-744, 199
Article

Braun, Dietrich ; Richter, E. (1997)
Quantitative Analyse von Thermostabilisatoren in Polyvinylchlorid.
In: Kautschuk, Gummi, Kunststoffe. 50 (1997), S. 696-703
Article

Braun, Dietrich ; Elsässer, H. ; Haimer, K. (1997)
Free radical copolymerization of 2,3-diphenyl-1,3-butadiene.
In: European polymer journal. 33 (1997), S. 1819-1822
Article

Braun, Dietrich ; Wilhelm, V. ; Hellmann, G. P. (1997)
Rigid-chain polyesters grafted with flexible-chain vinyl polymers.
In: Angewandte makromolekulare Chemie. 245 (1997), S. 73-88
Article

Braun, Dietrich ; Braun, I. ; Krämer, I. ; Hellmann, G. P. (1997)
Heterogeneous grafting of maleic anhydride and a-methylstyrene from atactic polypropylene.
In: Angewandte makromolekulare Chemie. 251 (1997), S. 37-48
Article

Braun, Dietrich ; Keller, C.-C. ; Roth, M. D. ; Schartel, B. ; Voigt, M. ; Wendorff, J. H. (1997)
Tetrahedral adamantane derivatives: Glass formation and melting behaviour.
In: Journal für praktische Chemie. 339 (1997), S. 708-713
Article

Braun, Dietrich ; Henze, I. ; Pasch, H. (1997)
Functionality type analysis of carboxy-terminated oligostyrenes by gradient high performance liquid chromatography.
In: Macromolecular chemistry and physics. 198 (1997), S. 3365-3376
Article

Braun, Dietrich ; Steinhauer-Beißer, S. (1997)
Initiation of polymerization with substituted ethanes - XV. Telomerization of methacrylate monomers with tetraphenyl succinonitrile.
In: European polymer journal. 33 (1997), No. 1, S. 7-12
Article

Braun, Dietrich ; Alig, Ingo ; Junker, M. ; Walther, J. (1997)
Two-component diacrylate networks from liquid-crystalline and non-liquid-crystalline monomers. I. Synthesis of the monomers, phase behaviour of the binary monomer mixtures, network formation.
In: Angewandte makromolekulare Chemie. 250 (1997), S. 105-117
Article

Braun, Dietrich ; Schacht, M. ; Elsässer, H. ; Tüdös, F. (1997)
Alternating terpolymerization of three non-homopolymerizable monomers.
In: Macromolecular rapid communications. 18 (1997), S. 335-342
Article

Braun, Dietrich ; Unvericht, R. ; Unvericht, R. (1996)
Modification of melamine-formaldehyde moulding compounds with epoxy resins.
In: Angewandte makromolekulare Chemie. 237 (1996), S. 1-44
Article

Braun, Dietrich (1996)
Triazine-based polymers: 4. MALDI-MS of triazine-based polyamines.
In: Polymer. 37 (1996), S. 777-783
Article

Braun, Dietrich (1996)
Block-graft copolymers as compatibilizers in polymer blends.
In: Polymer. 37 (1996), No. 17, S. 3871-3877
Article

Braun, Dietrich ; Walter, M. ; Hellmann, G. P. ; Walter, M. ; Hellmann, G. P. (1996)
Schlagzähmodifizierung von PVC durch Pfopfcopolymere auf EPDM-Basis.
In: KGK: Kautschuk, Gummi, Kunststoffe. 49 (1996), No. 5, S. 357-364
Article

Braun, Dietrich (1996)
Initiation of free radical polymerization by thermal cleavage of carbon-carbon bonds.
Conference or Workshop Item

Braun, Dietrich (1996)
Bigraft terpolymers with polybutadiene backbone and styrene as well as methyl methacrylate grafts.
In: European polymer journal. 32 (1996), No. 6, S. 791-800
Article

Braun, Dietrich ; Andradi, L. N. ; Fischer, M. ; Dietz, M. ; Hellmann, G. P. ; Andradi, L. N. ; Fischer, M. ; Dietz, M. ; Hellmann, G. P. (1996)
Stabilized polymer blends.
In: Journal of molecular science. A: Pure and applied chemistry. 33 (1996), No. 7, S. 857-868
Article

Braun, Dietrich ; Klein, M. ; Hellmann, G. P. (1996)
Toughened blends of polystyrene and polybutadiene filled with chalk.
In: Journal of applied polymer science. 60 (1996), S. 981-990
Article

Braun, Dietrich ; Richter, E. ; Richter, E. (1996)
Qualitative Analyse von Thermostabilisatoren in Polyvinylchlorid.
In: Kautschuk, Gummi, Kunststoffe. 50 (1996), S. 97-118
Article

Braun, Dietrich (1996)
Initiation of polymerization with substituted ethanes, 15. Telomerization of methacrylate monomers with tetraphenyl succinonitrile.
In: European polymer journal. 33 (1996), No. 1, S. 7-12
Article

Braun, Dietrich (1996)
Initiation of polymerization with substituted ethanes, 16. End-reactive methacrylate oligomers as precursors of block copolymers.
In: Angewandte makromolekulare Chemie. 239 (1996), S. 43-53
Article

Braun, Dietrich ; Krämer, K. (1995)
Recycling von kreidegefülltem PVC.
In: Kunststoffe, 85 (1995), H. 6, S. 822-824
Article

Braun, Dietrich ; Ross, S. (1995)
Influence of structural parameters on the dynamic mechanical properties of polyacetals.
In: Die angewandte makromolekulare Chemie. 228 (1995), S. 185-200
Article

Braun, Dietrich ; Krämer, K. (1995)
Untersuchungen zum materiellen Recycling von gebrauchten PVC-Produkten.
In: Chemische Technik. 47 (1995), S. 89-94
Article

Braun, Dietrich ; Ghahary, R. ; Ziser, T. (1995)
Triazine-based polymers, 3.
In: Die angewandte makromolekulare Chemie. 233 (1995), S. 121-131
Article

Braun, Dietrich ; Skrzek, T. (1995)
Initiation of polymerization with substituted ethanes, 14.
In: Macromolecular chemistry and physics. 196 (1995), S. 4039-4055
Article

Braun, Dietrich ; Bahlig, (1995)
Benzylcellulose als thermoplastischer Kunststoff, II.
In: Die angewandte makromolekulare Chemie. 224 (1995), S. 61-71
Article

Braun, Dietrich ; Skrzek, Thomas ; Steinhauer-Beißer, Susanne ; Tretner, Hartmut ; Lindner, H. J. (1995)
Initiation of polymerization with substituted ethanes, 13.
In: Macromolecular chemistry and physics, 196
Article

Braun, Dietrich ; Fischer, M. (1995)
Mechanical behaviour of PS/PVC blends compatibilized with block-graft copolymers based on poly(styrene-block-butadiene).
In: Die angewandte makromolekulare Chemie. 223 (1995), S. 77-87
Article

Braun, Dietrich ; Unvericht, R. (1995)
Model investigation of the co-condensation of melamine and phenol components in MPF thermoset moulding materials.
In: Die angewandte makromolekulare Chemie. 226 (1995), S. 183-195
Article

Braun, Dietrich ; Hettig-Rupaner, C. (1995)
Lichtinduzierte Polymerisation, 4.
In: Die angewandte makromolekulare Chemie. 225 (1995), S. 83-98
Article

Braun, Dietrich ; Frick, G. ; Grell, M. ; Klimes, M. ; Wendorff, J. H. (1995)
Liquid crystalline networks composed of rigid spacerless monomers: kinetics of network formation, anisotropic structure and mechanical properties.
In: Macromolecular chemistry and physics. 196 (1995), S. 3905-3918
Article

Braun, Dietrich ; Lienert, M. ; Wilhelm, V. (1995)
Synthese und Charakterisierung von flüssigkristallinen Hauptkettenpolyestern zur Verwendung in Mischungen mit Thermoplasten.
In: Die angewandte makromolekulare Chemie. 224 (1995), S. 191-195
Article

Braun, Dietrich ; Kuhn, K. J. ; Meid, H. ; Hellmann, G. P. ; Hellmann, E. H. (1994)
Polymers with thermosensitive C-C bonds.
In: Journal of polymer materials. 11 (1994), S. 197-206
Article

C

Cao, Wei ; Yin, Shanshan ; Bitsch, Martin ; Liang, Suzhe ; Plank, Martina ; Opel, Matthias ; Scheel, Manuel A. ; Gallei, Markus ; Janka, Oliver ; Schwartzkopf, Matthias ; Roth, Stephan V. ; Müller‐Buschbaum, Peter (2022)
In Situ Study of FePt Nanoparticles‐Induced Morphology Development during Printing of Magnetic Hybrid Diblock Copolymer Films.
In: Advanced Functional Materials, 32 (4)
doi: 10.26083/tuprints-00020999
Article, Secondary publication, Publisher's Version

Clerkin, Uta ; Rupprecht, Daniel ; Spiehl, Dieter ; Krausse, Marcel
ed.: Merck Patent GmbH (2021)
Method and device for the detection and measurement of redox parameters like free chlorine.
Norm, patent, standard

Cordt, Cynthia ; Meckel, Tobias ; Geissler, Andreas ; Biesalski, Markus (2021)
Entrapment of Hydrophobic Biocides into Cellulose Acetate Nanoparticles by Nanoprecipitation.
In: Nanomaterials, 2020, 10 (12)
doi: 10.26083/tuprints-00019277
Article, Secondary publication, Publisher's Version

Chitta, Rajesh (2014)
Development of High Temperature Liquid Chromatography for Chemical Composition Separation of Polyolefins.
TU Darmstadt
Ph.D. Thesis, Primary publication

D

Despot, Laura ; Andrieu‐Brunsen, Annette (2023)
Effects of the Polymer Amount and pH on Proton Transport in Mesopores.
In: Advanced Materials Interfaces, 2023, 10 (16)
doi: 10.26083/tuprints-00024322
Article, Secondary publication, Publisher's Version

Deshmukh, Subrajeet (2023)
Development of new chromatographic methods for the characterization of the chemical composition distribution of ethylene propylene diene terpolymers.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024203
Ph.D. Thesis, Primary publication, Publisher's Version

Dubois, Christelle ; Herzog, Nicole ; Rüttiger, Christian ; Geißler, Andreas ; Grange, Eléonor ; Kunz, Ulrike ; Kleebe, Hans-Joachim ; Biesalski, Markus ; Meckel, Tobias ; Gutmann, Torsten ; Gallei, Markus ; Andrieu-Brunsen, Annette (2022)
Fluid Flow Programming in Paper-Derived Silica–Polymer Hybrids.
In: Langmuir, 33 (1)
doi: 10.26083/tuprints-00021675
Article, Secondary publication, Postprint

Dernbach, Maria ; Kirsch, Julian ; Busch, Markus (2020)
Modeling Rheological Properties of HDPE Based on Polymerization Kinetics.
In: Chemie Ingenieur Technik, 5 (92)
doi: 10.1002/cite.201900160
Article

Diefenbach, Mathias (2020)
Modulation von Stofftransport durch polymermodifizierte und schaltbare Nanokanäle.
Technische Universität
doi: 10.25534/tuprints-00009484
Ph.D. Thesis, Primary publication

Duznovic, Ivana ; Diefenbach, Mathias ; Ali, Mubarak ; Stein, Tom ; Biesalski, Markus ; Ensinger, Wolfgang (2019)
Automated measuring of mass transport through synthetic nanochannels functionalized with polyelectrolyte porous networks.
In: Journal of Membrane Science, 591
doi: 10.1016/j.memsci.2019.117344
Article

Damodaran, Subin (2016)
Quantifying the effects of Processing and detaeriorating environments on polypropylene by infrared microscopy.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Dietz, Jennifer (2015)
Synthesis and characterization of novel function lignins - towards bio-based polyurethane materials.
TU Darmstadt
Ph.D. Thesis

Datta, Uttam ; Rehahn, Matthias (2004)
Synthesis and Self-Assembly of Styrene- [1]Dimethylsilaferrocenophane-Methyl Methacrylate Pentablock Copolymers.
In: Macromolecular Rapid Communications, 25
Article

E

Engel, Anja J. ; Paech, Steffen ; Langhans, Markus ; Etten, James L. van ; Moroni, Anna ; Thiel, Gerhard ; Rauh, Oliver (2023)
Combination of hydrophobicity and codon usage bias determines sorting of model K+ channel protein to either mitochondria or endoplasmic reticulum.
In: Traffic
doi: 10.1111/tra.12915
Article

Eckert, Denise ; Rapp, Felicitas ; Tsedeke, Ayele T. ; Molendowska, Jessica ; Lehn, Robert ; Langhans, Markus ; Fournier, Claudia ; Rödel, Franz ; Hehlgans, Stephanie (2022)
ROS- and Radiation Source-Dependent Modulation of Leukocyte Adhesion to Primary Microvascular Endothelial Cells.
In: Cells, 11 (1)
doi: 10.26083/tuprints-00020277
Article, Secondary publication, Publisher's Version

Eckert, Denise ; Rapp, Felicitas ; Tsedeke, Ayele Taddese ; Kraft, Daniela ; Wente, Isabell ; Molendowska, Jessica ; Basheer, Sidra ; Langhans, Markus ; Meckel, Tobias ; Friedrich, Thomas ; Donaubauer, Anna-Jasmina ; Becker, Ina ; Frey, Benjamin ; Fournier, Claudia (2022)
Modulation of Differentiation and Bone Resorbing Activity of Human (Pre-) Osteoclasts After X-Ray Exposure.
In: Frontiers in Immunology, 13
doi: 10.26083/tuprints-00021406
Article, Secondary publication, Publisher's Version

Eselem Bungu, Paul Severin ; Zentel, Kristina Maria ; Hintenlang, Sascha ; Busch, Markus ; Pasch, Harald (2020)
Comprehensive Analysis of Polyethylene Graft Copolymers by Preparative Fractionation, Interaction Chromatography, and Thermal Analysis.
In: ACS Applied Polymer Materials, 12 (2)
doi: 10.1021/acsapm.0c01094
Article

Eselem Bungu, Paul S. ; Pflug, Kristina ; Busch, Markus ; Pasch, Harald (2018)
Comprehensive analysis of novel grafted polyethylenes using multidimensional fractionation methods.
In: Polymer Chemistry, 9 (40)
doi: 10.1039/C8PY01122B
Article

El-Karzazi, Nadia (2017)
Einfluss des Kapillarsystems auf die Wechselwirkung komplexer Fluide mit Papieren.
Technische Universität
Ph.D. Thesis, Primary publication

Eckes, D. ; Busch, Markus (2016)
Coupled Deterministic and Stochastic Modeling of an Industrial Multi-Zone LDPE Autoclave Reactor.
In: Macromolecular Symposia, 360 (1)
doi: 10.1002/masy.201500115
Article

Elbert, Johannes (2015)
Redox-responsive Materialien auf Basis von oberflächenverankerten ferrocenhaltigen Polymeren.
TU Darmstadt
Ph.D. Thesis, Primary publication

Elbert, J. ; Krohm, F. ; Rüttiger, C. ; Kienle, S. ; Didzoleit, Haiko ; Balzer, B. ; Hugel, T. ; Stühn, B. ; Gallei, M. ; Brunsen, A. (2014)
Polymer-Modified Mesoporous Silica Thin Films for Redox-Mediated Selective Membrane Gating.
In: Advanced Functional Materials, 24 (11)
Article

Elbert, J. ; Gallei, M. ; Ruettiger, C. ; Brunsen, A. ; Didzoleit, Haiko ; Stühn, B. ; Rehahn, M. (2013)
Ferrocene Polymers for Switchable Surface Wettability.
In: Organometallics, 32 (20)
Article

F

Förster, Claire (2023)
Mit sichtbarem Licht induzierte Polymerisationen zum Polymer-Schreiben in mesoporösen Schichten.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024043
Ph.D. Thesis, Primary publication, Publisher's Version

Förster, Claire ; Lehn, Robert ; Andrieu‐Brunsen, Annette (2023)
Automated Multi‐ and Block‐Copolymer Writing in Mesoporous Films Using Visible‐Light PET‐RAFT and a Microscope.
In: Small : nano micro, 19 (16)
doi: 10.26083/tuprints-00024308
Article, Secondary publication, Publisher's Version

Förster, Claire ; Lehn, Robert ; Saritas, Enis Musa ; Andrieu‐Brunsen, Annette (2023)
Laser Writing of Block‐Copolymer Images into Mesopores Using SBDC‐Initiated Visible‐Light‐Induced Polymerization.
In: Angewandte Chemie International Edition, 62 (19)
doi: 10.26083/tuprints-00024296
Article, Secondary publication, Publisher's Version

Frieß, Florian V. ; Hu, Qiwei ; Mayer, Jannik ; Gemmer, Lea ; Presser, Volker ; Balzer, Bizan N. ; Gallei, Markus (2022)
Nanoporous Block Copolymer Membranes with Enhanced Solvent Resistance Via UV‐Mediated Cross‐Linking Strategies.
In: Macromolecular Rapid Communications, 43 (3)
doi: 10.26083/tuprints-00020992
Article, Secondary publication, Publisher's Version

Fickel, Beatrice ; Postulka, Niels ; Hartmann, Maximilian ; Gründing, Dirk M. ; Nau, Maximilian ; Meckel, Tobias ; Biesalski, Markus (2021)
Changes of meniscus shapes and capillary rise heights under hypergravity.
In: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 610
doi: 10.1016/j.colsurfa.2020.125688
Article

Fickel, Beatrice Alexandra (2021)
Untersuchung des adaptiven Benetzungsverhalten von quellbaren Poly-N-isopropylacrylamid Bürsten auf planaren Oberflächen.
Technische Universität
doi: 10.26083/tuprints-00019140
Ph.D. Thesis, Primary publication, Publisher's Version

Fries, Sebastian (2020)
Modelling of Fouling Mechanisms in the LDPE Synthesis.
Technische Universität Darmstadt
Ph.D. Thesis

Fischer, Johannes (2020)
Synthese und Evaluierung neuer bifunktioneller Antioxidantien zur thermo-oxidativen Langzeit-Stabilisierung von Polypropylen.
Technische Universität Darmstadt
doi: 10.25534/tuprints-00012659
Ph.D. Thesis, Primary publication, Publisher's Version

Fries, S. ; Castaneda-Zuniga, D. M. ; Duchateau, J. ; Neuteboom, P. ; Porras, C. T. ; Busch, Markus (2016)
Fouling in the High Pressure LDPE Process: Experimental and Computational Investigation Approach.
In: Macromolecular Symposia, 360 (1)
doi: 10.1002/masy.201500112
Article

Friedrich, Birgit (2012)
Schnelle Reaktionen von Zuckersäureestern - neue biobasierte Vernetzerbausteine.
Deutsches Kunststoff-Institut / Makromolekulare Chemie
Ph.D. Thesis, Primary publication

G

Goedderz, Daniela ; Weber, Lais ; Markert, Daniel ; Schießer, Alexander ; Fasel, Claudia ; Riedel, Ralf ; Altstädt, Volker ; Bethke, Christian ; Fuhr, Olaf ; Puchtler, Florian ; Breu, Josef ; Döring, Manfred (2023)
Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent.
In: Journal of Applied Polymer Science, 2020, 137 (1)
doi: 10.26083/tuprints-00024255
Article, Secondary publication, Postprint

Grotian genannt Klages, Hannah ; Ermis, Nihal ; Luinstra, Gerrit Albert ; Zentel, Kristina Maria (2021)
Coupling Kinetic Modelling with SAOS and LAOS Rheology of Poly(n-Butyl Acrylate).
In: Macromolecular Rapid Communications
doi: 10.1002/marc.202100620
Article

Gokhale-Stec, Maria (2021)
Improvement of ductility and crystallization properties of poly (lactic acid) (PLA).
Technische Universität Darmstadt
doi: 10.26083/tuprints-00019092
Ph.D. Thesis, Primary publication, Publisher's Version

Goedderz, Daniela (2021)
Neue Flammschutzmittel für PET und Aufklärung der Wirkmechanismen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00018599
Ph.D. Thesis, Primary publication, Publisher's Version

Goedderz, Daniela ; Weber, Lais ; Markert, Daniel ; Schießer, Alexander ; Fasel, Claudia ; Riedel, Ralf ; Altstädt, Volker ; Bethke, Christian ; Fuhr, Olaf ; Puchtler, Florian ; Breu, Josef ; Döring, Manfred (2020)
Flame retardant polyester by combination of organophosphorus compounds and an NOR radical forming agent.
In: Journal of Applied Polymer Science, 137 (1)
doi: 10.1002/app.47876
Article

Garth, Kim Loretta (2020)
Development of New Flame Retardant and Heat Stabilized Polyamides.
Technische Universität
doi: 10.25534/tuprints-00009655
Ph.D. Thesis, Primary publication

Greiner, Lara (2020)
Faserschutz und Flammschutz von kohlenstofffaserverstärkten Epoxidharzen.
Technische Universität
doi: 10.25534/tuprints-00009639
Ph.D. Thesis, Primary publication

Gradowski, Sebastian von (2019)
Biogenic Polymers: From Barrier Coatings towards the Design of novel low-adhesive Release Liner.
Technische Universität
Ph.D. Thesis, Primary publication

Galinski, Yvonne (2018)
Untersuchungen zur Lichtstreuung von TiO2-Pigmenten in Dekorpapieren.
Technische Universität
Ph.D. Thesis, Primary publication

Groos, Benjamin (2017)
Antinukleierung von Polyamiden.
Technische Universität
Ph.D. Thesis, Primary publication

Geißler, Andreas (2017)
Charakterisierung und Applikation von Fettsäureestern der Cellulose und deren kolloidaler Systeme.
TU Darmstadt
Ph.D. Thesis

Graf, Jochen Michael (2016)
Synthesis and application of photoreactive polyvinyl acetate and polyvinyl alcohol copolymers.
TU Darmstadt
Ph.D. Thesis

Grönewald, Matthias (2013)
Ionenkomposite und Ionensiloxancopolymere und ihre Eignung als DEA.
TU Darmstadt
Ph.D. Thesis, Primary publication

Gawrisch, Christian (2013)
Synthese von organischen Halbleitern für die OFET-Anwendung auf Basis von Ditetracen.
TU Darmstadt
Ph.D. Thesis, Primary publication

Ghareeb, Hewa Othman (2012)
Development of new analytical methods to characterize the heterogeneity of cellulose acetates.
TU Darmstadt
Ph.D. Thesis, Primary publication

Ginzburg, Anton (2012)
DEVELOPMENT OF HIGH TEMPERATURE TWO DIMENSIONAL LIQUID CHROMATOGRAPHY OF POLYOLEFINS.
TU Darmstadt
Ph.D. Thesis, Primary publication

Gokhale, Rhishikesh (2012)
Synthesis and characterization of polymer coated, self-assembled peptide nanotubes- towards tailor-made soft nanorods.
TU Darmstadt
Ph.D. Thesis

Gallei, Markus (2010)
Synthese funktionaler Metallo-Blockcopolymerer.
TU Darmstadt
Ph.D. Thesis, Primary publication

Galda, Patrick ; Brédas, J. L. ; Zojer, E. (2002)
Influence of the degree of conjugation on excited state lifetimes in phenylene-based materials.
In: Synthetic metals, 127
Article

Guilleaume, Birgit ; Blaul, Jürgen ; Ballauff, Matthias ; Wittemann, Matthias ; Rehahn, Matthias ; Goerigk, G. (2002)
The distribution of counterions around synthetic rod-like polyelectrolytes in solution.
In: European physical journal E, 8
Article

H

Helbrecht, Christiane ; Langhans, Markus ; Meckel, Tobias ; Biesalski, Markus ; Schabel, Samuel (2023)
Analyses of the effects of fiber diameter, fiber fibrillation, and fines content on the pore structure and capillary flow using laboratory sheets of regenerated fibers.
In: Nordic Pulp & Paper Research Journal (NPPRJ)
doi: 10.1515/npprj-2022-0077
Article

Helbrecht, Christiane ; Schmitt, Fabian ; Meckel, Tobias ; Biesalski, Markus ; Etzold, Bastian J. M. ; Schabel, Samuel (2023)
Mechanical properties of paper saturated with a hydrophobic ionic liquid.
In: BioResources, 18 (2)
doi: 10.15376/biores.18.2.2842-2856
Article

Hapke, Sören ; Luinstra, Gerrit Albert ; Zentel, Kristina Maria (2021)
Optimization of a 3D-printed tubular reactor for free radical polymerization by CFD.
In: Journal of Flow Chemistry, 2021
doi: 10.1007/s41981-021-00154-5
Article

Herzog, Nicole ; Hübner, Hanna ; Rüttiger, Christian ; Gallei, Markus ; Andrieu-Brunsen, Annette (2021)
Functional Metalloblock Copolymers for the Preparation and In Situ Functionalization of Porous Silica Films.
In: Langmuir, 36 (15)
doi: 10.26083/tuprints-00019782
Article, Secondary publication, Postprint

Herzog, Nicole ; Hübner, Hanna ; Rüttiger, Christian ; Gallei, Markus ; Andrieu-Brunsen, Annette (2020)
Functional Metalloblock Copolymers for the Preparation and In Situ Functionalization of Porous Silica Films.
In: Langmuir, 36 (15)
doi: 10.1021/acs.langmuir.0c00245
Article

Hilfer, Anton ; Degenkolb, Jonas ; Busch, Markus (2019)
Experimental Investigation of Ethene Decomposition by Video – Determination of Physical Data for Simulation Model.
In: Chemie Ingenieur Technik, 91 (5)
doi: 10.1002/cite.201800204
Article

Herzog, Nicole ; Brilmayer, Robert ; Stanzel, Mathias ; Kalyta, Anastasia ; Spiehl, Dieter ; Dörsam, Edgar ; Hess, Christian ; Andrieu-Brunsen, Annette (2019)
Gravure printing for mesoporous film preparation.
In: RSC Advances, 9 (41)
doi: 10.1039/C9RA04266K
Article, Secondary publication

Horstmann, Benjamin (2015)
Stimulussensitive Polymersysteme zur Biokonjugation an Proteinen am Beispiel der Histondeacetylase-ähnliche Amidohydrolase.
Technische Universität
Ph.D. Thesis, Primary publication

Hirsch, Lutz (2013)
Reaktionen und Synthesen reaktiver Zuckersäurederivate.
TU Darmstadt
Ph.D. Thesis, Primary publication

Hinderberger, Dariush ; Schmelz, Oliver ; Rehahn, Matthias ; Jeschke, Gunnar (2004)
Electrostatic Site Attachment of Divalent Counterions to Rodlike Ruthenium (II) Coordination Polymers Characterized by EPR Spectroscopy.
In: Angewandte Chemie International Edition, 43
Article

Holm, Christian ; Rehahn, Matthias ; Oppermann, Wilhelm ; Ballauff, Matthias (2004)
Stiff-chain polyelectrolytes.
In: Advances in Polymer Science, 166
Article

I

Irmer, Jonas von (2021)
Suzuki-Polykondensation hochmolekularer Poly-para-phenylene mittels Mikrowellenstrahlung.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00011876
Ph.D. Thesis, Primary publication, Publisher's Version

J

John, Daniel (2023)
Polymerisation in mesoporösen Schichten durch sichtbares Licht und Oberflächenplasmonen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022985
Ph.D. Thesis, Primary publication, Publisher's Version

John, Daniel ; Mohammadi, Reza ; Vogel, Nicolas ; Andrieu-Brunsen, Annette (2022)
Surface-Plasmon- and Green-Light-Induced Polymerization in Mesoporous Thin Silica Films.
In: Langmuir, 36 (7)
doi: 10.26083/tuprints-00021742
Article, Secondary publication, Postprint

John, Daniel ; Stanzel, Mathias ; Andrieu‐Brunsen, Annette (2021)
Surface Plasmons and Visible Light Iniferter Initiated Polymerization for Nanolocal Functionalization of Mesoporous Separation Layers.
In: Advanced Functional Materials, 31 (20)
doi: 10.26083/tuprints-00019732
Article, Secondary publication, Publisher's Version

John, Daniel ; Mohammadi, Reza ; Vogel, Nicolas ; Andrieu-Brunsen, Annette (2020)
Surface-Plasmon- and Green-Light-Induced Polymerization in Mesoporous Thin Silica Films.
In: Langmuir, 36 (7)
doi: 10.1021/acs.langmuir.0c00043
Article

Jocher, Michael (2018)
Photoreaktive Copolymere als neue, funktionale Nassfestmittel in der Papiertechnologie.
Technische Universität
Ph.D. Thesis, Primary publication

Janko, Marek ; Jocher, Michael ; Boehm, Alexander ; Babel, Laura ; Bump, Steven ; Biesalski, Markus ; Meckel, Tobias ; Stark, Robert W. (2015)
Cross-Linking Cellulosic Fibers with Photoreactive Polymers: Visualization with Confocal Raman and Fluorescence Microscopy.
In: Biomacromolecules, 16 (7)
Article

Jocher, M. ; Gattermayer, M. ; Kleebe, H.-J. ; Kleemann, S. ; Biesalski, M. (2015)
Enhancing the wet strength of lignocellulosic fibrous networks using photo-crosslinkable polymers.
In: Cellulose, 22 (1)
doi: 10.1007/s10570-014-0477-y
Article

K

Kot, David (2023)
Innovative Ansätze zur chromatografischen Analyse von Additiven in Polyolefinen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024199
Ph.D. Thesis, Primary publication, Publisher's Version

Klitsch, Johannes (2023)
Entwicklung halogenfrei flammgeschützter Polyamide.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024062
Ph.D. Thesis, Primary publication, Publisher's Version

Karl, Janis Alexander (2022)
Absorption der Impakt-Energie durch Zwischenschichten aus Gummi.
Technische Universität
doi: 10.26083/tuprints-00020372
Ph.D. Thesis, Primary publication, Publisher's Version

Khalil, Adnan (2022)
Benetzungssteuerung und der Einfluss auf ionischen Stofftransport in mesoporöse Filme.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00021598
Ph.D. Thesis, Primary publication, Publisher's Version

Kübelbeck, Sonja ; Mikhael, Jules ; Keller, Harald ; Konradi, Rupert ; Andrieu-Brunsen, Annette ; Baier, Grit (2022)
Enzyme-Polymer Conjugates to Enhance Enzyme Shelf Life in a Liquid Detergent Formulation.
In: Macromolecular Bioscience, 18 (7)
doi: 10.26083/tuprints-00021680
Article, Secondary publication, Postprint

Khalil, Adnan ; Zimmermann, Matthias ; Bell, Alena K. ; Kunz, Ulrike ; Hardt, Steffen ; Kleebe, Hans-Joachim ; Stark, Robert W. ; Stephan, Peter ; Andrieu-Brunsen, Annette (2022)
Insights into the interplay of wetting and transport in mesoporous silica films.
In: Journal of Colloid and Interface Science, 560
doi: 10.26083/tuprints-00021740
Article, Secondary publication, Postprint

Khalil, Adnan ; Schäfer, Felix ; Postulka, Niels ; Stanzel, Mathias ; Biesalski, Markus ; Andrieu-Brunsen, Annette (2022)
Wettability-defined droplet imbibition in ceramic mesopores.
In: Nanoscale, 12 (47)
doi: 10.26083/tuprints-00021744
Article, Secondary publication, Postprint

Klump, Katja (2021)
Stabilisierung von Polyamiden bezüglich der Lagerung bei hohen Temperaturen.
Technische Universität
doi: 10.26083/tuprints-00017525
Ph.D. Thesis, Primary publication, Publisher's Version

Kredel, Julia (2021)
Synthese abbaubarer fluorierter Polymerarchitekturen zur Anwendung als funktionale Beschichtungen und responsive Materialien.
Technische Universität
doi: 10.26083/tuprints-00017593
Ph.D. Thesis, Primary publication, Publisher's Version

Khalil, Adnan ; Schäfer, Felix ; Postulka, Niels ; Stanzel, Mathias ; Biesalski, Markus ; Andrieu-Brunsen, Annette (2020)
Wettability-defined droplet imbibition in ceramic mesopores.
In: Nanoscale, 12 (47)
doi: 10.1039/d0nr06650h
Article

Kreplin, Frederic ; Schabel, Samuel ; Lehmann, Martin ; Büter, Andreas ; Thomas, Mandy ; Arndt, Tiemo ; Mehlhase, Sabrina ; Biesalski, Markus ; Mittelstedt, Christian ; Maier, Andreas ; Kiziltoprak, Nihat ; Schneider, Jens ; Gilka-Bötzow, Albrecht ; Nazari Sam, Mona ; Koenders, E. A. B.
ed.: Schabel, Samuel (2020)
KOMPAP - Energieeffizientes Bauen durch Komposit-Materialien mit Papier.
Report

Khalil, Adnan ; Zimmermann, Matthias ; Bell, Alena K. ; Kunz, Ulrike ; Hardt, Steffen ; Kleebe, Hans-Joachim ; Stark, Robert W. ; Stephan, Peter ; Andrieu-Brunsen, Annette (2020)
Insights into the interplay of wetting and transport in mesoporous silica films.
In: Journal of Colloid and Interface Science, 560
doi: 10.1016/j.jcis.2019.09.093
Article

Kübelbeck, Sonja (2020)
Stabilization of Industry-Relevant Enzyme Formulations.
Technische Universität
doi: 10.25534/tuprints-00011666
Ph.D. Thesis, Primary publication

Kuch, Serena (2019)
Neue PPV-Derivate auf ungewöhnlichen Wegen.
Technische Universität
Ph.D. Thesis, Primary publication

Koşak Söz, Çağla ; Trosien, Simon ; Biesalski, Markus (2018)
Superhydrophobic Hybrid Paper Sheets with Janus-Type Wettability.
In: ACS Applied Materials & Interfaces, 10 (43)
doi: 10.1021/acsami.8b12116
Article

Kumari, Bharti ; John, Daniel ; Hoffmann, Paul ; Spende, Anne ; Toimil-Molares, Maria Eugenia ; Trautmann, Christina ; Hess, Christian ; Ruff, Philip ; Schulze, Marcus ; Stark, Robert ; Buntkowsky, Gerd ; Andrieu-Brunsen, Annette ; Gutmann, Torsten (2018)
Surface Enhanced DNP Assisted Solid-State NMR of Functionalized SiO2 Coated Polycarbonate Membranes.
In: Zeitschrift für Physikalische Chemie, 232 (7-8)
doi: 10.1515/zpch-2017-1032
Article

Krupp, Valentina (2018)
Poly(ortho-phenylen vinylene) als neue Emitter-Materialien in Polymer-basierten organischen Leuchtdioden.
Technische Universität
Ph.D. Thesis, Primary publication

Krohm, Fabio (2017)
Ladungsdichtevariation und SI-ROMP photochromer Homopolymere in Mesoporen.
Technische Universität
Ph.D. Thesis, Primary publication

Krupp, Alexis (2015)
Helikal-chirale Poly(phenyl-acetylene) als Alignment-Medien zur Anwendung in der RDC-basierten Strukturanalytik.
TU Darmstadt
Ph.D. Thesis, Primary publication

Klemme, Sander (2015)
Untersuchung des Quellungsverhaltens oberflächengebundener Polyelektrolyte im elektrischen Feld mittels Ellipsometrie.
TU Darmstadt
Ph.D. Thesis

Kaur, Sarabjeet ; Gallei, Markus ; Ionescu, Emanuel (2014)
Polymer–Ceramic Nanohybrid Materials.
In: Advances in Polymer Science
Book Section

Kottlorz, Christoph (2014)
3D-Druckverfahren für kompakte und mechanisch stabile Formkörper.
TU Darmstadt
Ph.D. Thesis, Primary publication

Kutschera, Sibylle (2013)
Umweltfreundliche, selbstvernetzende Silanlacke.
TU Darmstadt
Ph.D. Thesis, Primary publication

Kadel, I. ; Herrmann, T. ; Busch, Markus (2013)
Modeling Free Radical Ethylene Polymerization with Multifunctional Comonomers in Tubular Reactors: Influence on Microstructural LDPE Properties.
In: Macromolecular Symposia, 324 (1)
doi: 10.1002/masy.201200069
Article

Kasalo, R. ; Busch, Markus (2013)
Quantitative NMR Spectroscopy and Determination of Polymer Microstructure of Ethylene-Styrene and Ethylene-Isobutylene Co-Polymers.
In: Macromolecular Symposia, 324 (1)
doi: 10.1002/masy.201200070
Article

Kloninger, Christian ; Rehahn, Matthias (2006)
Synthesis and bulk morphology of styrene-ferrocenylsilane-methyl methacrylate tri- and pentablock copolymers.
Conference or Workshop Item

Kubasch, J. ; Rehahn, Matthias (2006)
Dendronized copper(I)-metallopolymers.
Conference or Workshop Item

Kloninger, C. ; Rehahn, Matthias (2006)
Carbanion-pump mediated synthesis and bulk morphologies of errocenyldimethylsilane-methyl methacrylate diblock copolymers.
Conference or Workshop Item

Kubasch, Julia ; Rehahn, Matthias (2004)
Soluble organic / inorganic hybrid polymers containing kinetically labile copper(I) complexes.
In: Polymer Preprints, 45
Article

Kloninger, Christian ; Rehahn, Matthias (2004)
1,1-Dimethylsilacyclobutane-Mediated Living Anionic Block Copolymerization of Silaferrocenophane and Methylmethacrylate.
In: Macromolecules, 37
Article

Kloninger, Christian ; Rehahn, Matthias (2004)
Bicontinuous Gyroidic Morphologies in Ferrocenyldimethylsilane-b-Methyl Methacrylate Diblock Copolymer Blends.
In: Macromolecules, 37
Article

Kloninger, Christian ; Rehahn, Matthias (2004)
Carbanion-Pump Mediated Endcapping as a Key-Step in the Synthesis of Organometallic Block Copolymers.
In: Polymer Preprints, 45
Article

Kloninger, Christian ; Knecht, Daniela ; Rehahn, Matthias (2004)
Microphase behaviour of ferrocenyldimethylsilane-b-methylmethacrylate diblock copolymers.
In: Polymer, 45
Article

Knapp, Ralf ; Kelch, Steffen ; Schmelz, Oliver ; Rehahn, Matthias (2003)
Synthesis and properties in solution of Ruthenium(II) coordination polymers.
Conference or Workshop Item

Knapp, Ralf ; Schott, A. ; Rehahn, M. (1996)
A novel synthetic strategy towards soluble, well-defined ruthenium(II) coordination polymers.
In: Macromolecules, 29 (1)
doi: 10.1021/ma946520u
Article

L

Lin, Binbin ; Auernhammer, Julia ; Schäfer, Jan-Lukas ; Meckel, Tobias ; Stark, Robert ; Biesalski, Markus ; Xu, Bai-Xiang (2022)
Humidity influence on mechanics of paper materials: joint numerical and experimental study on fiber and fiber network scale.
In: Cellulose, 29 (2)
doi: 10.1007/s10570-021-04355-y
Article

Loesch-Zhang, Amelia ; Cordt, Cynthia ; Geissler, Andreas ; Biesalski, Markus (2022)
A Solvent-Free Approach to Crosslinked Hydrophobic Polymeric Coatings on Paper Using Vegetable Oil.
In: Polymers, 14 (9)
doi: 10.26083/tuprints-00021376
Article, Secondary publication, Publisher's Version

Leipold, Anina (2021)
Oxyimidester als neuartige Flammschutzmittel für Polyolefine.
Technische Universität
doi: 10.26083/tuprints-00019148
Ph.D. Thesis, Primary publication, Publisher's Version

Lorenz, Theresa Gudrun (2020)
Design und Synthese von dichroitischen Nah-Infrarot-Farbstoffen.
Technische Universität
doi: 10.25534/tuprints-00008811
Ph.D. Thesis, Primary publication

Li, Wei (2016)
Preparation and characterization of Spiropyran-functional paper.
TU Darmstadt
Ph.D. Thesis

Linge, Martin Rouven (2015)
Entwicklung und Charakterisierung von Triplett-Hostmaterialien und deren Verwendung in OLED.
TU Darmstadt
Ph.D. Thesis

Loyal, Florian (2014)
Catechol-funktionale Copolymere als neuartige Prozess- und Funktionsadditive zur Herstellung funktionaler Papiere.
TU Darmstadt
Ph.D. Thesis

Li, Tiantian (2013)
Charakterisierung von Biopolymeren.
TU Darmstadt
Ph.D. Thesis, Primary publication

Lennert, Angela Renate (2011)
Hochporöse organische Polymermaterialien für die Gasspeicherung.
TU Darmstadt
Ph.D. Thesis

Laube, Bettina ; Schmelz, Oliver ; Rehahn, Matthias ; Wunderlich, Winfried (2003)
Metallo-celluloses, 2 : Synthesis of cellulose derivatives bearing lateral bis-terpyridine ruthenium (II) complexes.
In: e-Polymers, 3 (1)
doi: 10.1515/epoly.2003.3.1.870
Article

Lahn, Brigitte ; Rehahn, Matthias (2002)
Coordination polymers from kinetically labile transition-metal complexes: true macromolecules or only dynamic solution aggregates?
In: e-Polymers
Article

M

Mikolei, Joanna J. ; Richter, D. ; Pardehkhorram, R. ; Helbrecht, Christiane ; Schabel, Samuel ; Meckel, Tobias ; Biesalski, Markus ; Ceolin, M. ; Andrieu-Brunsen, Annette (2023)
Nanoscale pores introduced into paper via mesoporous silica coatings using sol–gel chemistry.
In: Nanoscale, 15 (20)
doi: 10.1039/d3nr01247f
Article

Mirdamadi Esfahani, Maleknaz ; Goerlitzer, Eric Sidney Aaron ; Kunz, Ulrike ; Vogel, Nicolas ; Engstler, Joerg ; Andrieu-Brunsen, Annette (2022)
N-Methyl-2-pyrrolidone as a Reaction Medium for Gold(III)-Ion Reduction and Star-like Gold Nanostructure Formation.
In: ACS Omega, 7 (11)
doi: 10.26083/tuprints-00021492
Article, Secondary publication, Publisher's Version

Mikolei, Joanna J. ; Neuenfeld, Lukas ; Paech, Steffen ; Langhans, Markus ; Biesalski, Markus ; Meckel, Tobias ; Andrieu‐Brunsen, Annette (2022)
Mechanistic Understanding and Three‐Dimensional Tuning of Fluid Imbibition in Silica‐Coated Cotton Linter Paper Sheets.
In: Advanced Materials Interfaces, 9 (19)
doi: 10.26083/tuprints-00022447
Article, Secondary publication, Publisher's Version

Martinaiou, Ioanna ; Wolker, Thomas ; Shahraei, Ali ; Zhang, Gui-Rong ; Janßen, Arne ; Wagner, Stephan ; Weidler, Natascha ; Stark, Robert W. ; Etzold, Bastian J. M. ; Kramm, Ulrike I. (2018)
Improved electrochemical performance of Fe-N-C catalysts through ionic liquid modification in alkaline media.
In: Journal of Power Sources, 375
doi: 10.1016/j.jpowsour.2017.07.028
Article

Meier, Christoph (2017)
Neue Hochtemperatur-Matrixharze für Kohlenstofffaser-Verbundwerkstoffe.
Technische Universität
Ph.D. Thesis, Primary publication

Meub, Marcel (2017)
Modifizierung nachhaltiger Rohstoffe zur Eigenschaftsverbesserung von Compounds mit Polypropylen.
Technische Universität
Ph.D. Thesis, Primary publication

Mehlhase, Sabrina (2016)
Development of a Lignin Substituted Thermoset for Fiber Reinforced Polymers.
Technische Universität
Ph.D. Thesis, Primary publication

Mazurowski, Markus (2016)
Polymerbürsten-dekorierte Nanopartikel.
Technische Universität
Ph.D. Thesis, Primary publication

Mekap, Dibyaranjan (2014)
Development of novel methodologies and fundamental studies on the compositional separation of polyethylene by High temperature liquid adsorption chromatography.
TU Darmstadt
Ph.D. Thesis, Primary publication

Mlynek, Matthäus (2014)
Quantitative Pyrolyse-Gaschromatographie-Massenspektrometrie-Kopplung zur Bestimmung der chemischen Zusammensetzung vernetzter Polymere.
TU Darmstadt
Ph.D. Thesis, Primary publication

Mass, Valentina (2011)
Strukturaufklärung komplexer Polymere mittels MALDI-CID-MS.
TU Darmstadt/Makromolekulare Chemie
Ph.D. Thesis, Primary publication

N

Nau, Maximilian ; Herzog, Nicole ; Schmidt, Johannes ; Meckel, Tobias ; Andrieu‐Brunsen, Annette ; Biesalski, Markus (2022)
Janus‐Type Hybrid Paper Membranes.
In: Advanced Materials Interfaces, 6 (18)
doi: 10.26083/tuprints-00021739
Article, Secondary publication, Postprint

Nau, Maximilian (2020)
Functional surface coatings and novel materials derived from hydroxypropyl cellulose.
Technische Universität
doi: 10.25534/tuprints-00011345
Ph.D. Thesis, Primary publication

Nau, Maximilian ; Herzog, Nicole ; Schmidt, Johannes ; Meckel, Tobias ; Andrieu‐Brunsen, Annette ; Biesalski, Markus (2019)
Janus‐Type Hybrid Paper Membranes.
In: Advanced Materials Interfaces
doi: 10.1002/admi.201900892
Article

Nau, Maximilian ; Seelinger, David ; Biesalski, Markus (2019)
Independent Two Way Switching of the Wetting Behavior of Cellulose‐Derived Nanoparticle Surface Coatings by Light and by Temperature.
In: Advanced Materials Interfaces
doi: 10.1002/admi.201900378
Article

Nau, Maximilian ; Trosien, Simon ; Seelinger, David ; Boehm, Anna K. ; Biesalski, Markus (2019)
Spatially Resolved Crosslinking of Hydroxypropyl Cellulose Esters for the Generation of Functional Surface-Attached Organogels.
In: Frontiers in Chemistry, 7
doi: 10.3389/fchem.2019.00367
Article, Secondary publication

Nauhardt, Mark (2018)
Synthese funktionalisierter Blockcopolymere als potentielle Haft- und Phasenvermittler zwischen Kunststoff und Glas.
Technische Universität
Ph.D. Thesis, Primary publication

Nau, Maximilian ; Seelinger, David ; Biesalski, Markus (2018)
Functional surface coatings from tailor-made long-chain hydroxypropyl cellulose ester nanoparticles.
In: Cellulose, 25 (10)
doi: 10.1007/s10570-018-1981-2
Article

Neuhaus, E. ; Herrmann, T. ; Vittorias, I. ; Lilge, D. ; Mannebach, G. ; Gonioukh, A. ; Busch, Markus (2014)
Modeling the Polymeric Microstructure of LDPE in Tubular and Autoclave Reactors with a Coupled Deterministic and Stochastic Simulation Approach.
In: Macromolecular Theory and Simulations, 23 (7)
doi: 10.1002/mats.201400014
Article

Neuhaus, E. ; Busch, Markus ; Gonioukh, A. ; Herrmann, T. ; Lilge, D. ; Mannebach, G. ; Vittorias, I. (2013)
Coupling Deterministic and Stochastic Simulation to Model the Polymeric Microstructure of LDPE.
In: Macromolecular Symposia, 324 (1)
doi: 10.1002/masy.201200068
Article

Nordt, Sawa (2010)
Analytik von Novolak-Epoxidharzen für die Resistentwicklung in der Mikrosystemtechnik.
Deutsches Kunststoff-Institut / Makromolekulare Chemie
Ph.D. Thesis, Primary publication

Neumann, Christopher Noël Dietmar (2010)
Darstellung aromatischer Monomere auf Basis von 5-Hydroxymethylfurfural.
TU Darmstadt
Ph.D. Thesis, Primary publication

O

Olschewski, Markus (2022)
Neue polymere phosphitische Antioxidantien zur Stabilisierung von Polyolefinen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00021575
Ph.D. Thesis, Primary publication, Publisher's Version

Ochs, Maria ; Khalil, Adnan ; Frömling, Till ; Andrieu‐Brunsen, Annette (2021)
Influence of Wettability on the Impedance of Ion Transport Through Mesoporous Silica Films.
In: Advanced Materials Interfaces, 2021
doi: 10.1002/admi.202002095
Article

Ott, Marcus W. ; Dietz, Christian ; Trosien, Simon ; Mehlhase, Sabrina ; Bitsch, Martin J. ; Nau, Maximilian ; Meckel, Tobias ; Geissler, Andreas ; Siegert, Gregor ; Huong, Jasmin ; Hertel, Brigitte ; Stark, Robert W. ; Biesalski, Markus (2021)
Co-curing of epoxy resins with aminated lignins: insights into the role of lignin homo crosslinking during lignin amination on the elastic properties.
In: Holzforschung, 75 (4)
doi: 10.1515/hf-2020-0060
Article

Ochs, Maria ; Khalil, Adnan ; Frömling, Till ; Andrieu‐Brunsen, Annette (2021)
Influence of Wettability on the Impedance of Ion Transport Through Mesoporous Silica Films.
In: Advanced Materials Interfaces, 8 (9)
doi: 10.26083/tuprints-00019733
Article, Secondary publication, Publisher's Version

Ochs, Maria ; Mohammadi, Reza ; Vogel, Nicolas ; Andrieu‐Brunsen, Annette (2021)
Wetting‐Controlled Localized Placement of Surface Functionalities within Nanopores.
In: Small, 16 (17)
doi: 10.26083/tuprints-00019916
Article, Secondary publication, Publisher's Version

Ochs, Maria (2021)
Multifunktionalisierung und Charakterisierung von Nanoporen mit Sensorpotential.
Technische Universität
doi: 10.26083/tuprints-00020167
Ph.D. Thesis, Primary publication, Publisher's Version

Ochs, Maria ; Mohammadi, Reza ; Vogel, Nicolas ; Andrieu‐Brunsen, Annette (2020)
Wetting‐Controlled Localized Placement of Surface Functionalities within Nanopores.
In: Small, 16 (17)
doi: 10.1002/smll.201906463
Article

Ott, Marcus (2017)
Tailor-made cellulose graft copolymers by controlled radical polymerization techniques.
Technische Universität
Ph.D. Thesis, Primary publication

Ohneiser, Alexander (2011)
Kombination von Ultraschallspektroskopie und Dilatometrie zur Analyse der Strukturbildung während der Kristallisation von Polymeren unter Druck.
TU Darmstadt
Ph.D. Thesis, Primary publication

Otte, Tino (2010)
Charakterisierung von ultrahochmolekularen Polyolefinen mit Asymmetischer Fluss-Feldflussfraktionierung und Größenausschlusschromatographie.
TU Darmstadt
Ph.D. Thesis, Primary publication

P

Postulka, Niels (2022)
Charakterisierung von benetzbaren Systemen mittels Beschreibung des Kapillarverhaltens unter Rotationsbedingungen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022847
Ph.D. Thesis, Primary publication, Publisher's Version

Pfeiffer, Maximilian Alexander (2021)
Polymerelektrolyte auf der Basis von Polyphosphazenen für den Einsatz in Lithiumionenbatterien.
Technische Universität
doi: 10.26083/tuprints-00017471
Ph.D. Thesis, Primary publication, Publisher's Version

Postulka, Niels ; Meckel, Tobias ; Biesalski, Markus (2021)
Porosity centrifuge: determination of pore sizes of swellable porous materials under hypergravity.
In: Langmuir, (29)
doi: 10.1021/acs.langmuir.1c01002
Article

Postulka, Niels ; Spiehl, Dieter ; Meckel, Tobias ; Biesalski, Markus
ed.: Technische Universität Darmstadt (2020)
Mikrofluide Einheit und ein Verfahren zu deren Herstellung.
Norm, patent, standard

Ponce, Sebastian (2020)
Development and Application of a Liquid Core Waveguide Membrane Microreactor.
Technische Universität
doi: 10.25534/tuprints-00009100
Ph.D. Thesis, Primary publication

Peikert, Paul ; Pflug, Kristina M. ; Busch, Markus (2019)
Modeling of High-Pressure Ethene Homo- and Copolymerization.
In: Chemie Ingenieur Technik, 91 (5)
doi: 10.1002/cite.201800206
Article

Pflug, Kristina M. ; Busch, Markus (2016)
Impact of Thermo-Physical Data on the Modeling of High-Pressure Polymerizations.
In: Chemie Ingenieur Technik, 88 (11)
doi: 10.1002/cite.201600082
Article

Presser, Jonas (2012)
Neue Komponenten für das generative Fertigungsverfahren des 3D-Drucks.
TU Darmstadt
Ph.D. Thesis, Primary publication

Portl, Thomas (2011)
NanoHIPS als schlagzähmodifizierter Thermoplast.
Deutsches Kunststoff-Institut / Makromolekulare Chemie
Ph.D. Thesis, Primary publication

Petersen, Sönke (2011)
Bioactive surface coatings based on peptide-polymer micropatterns - towards the design of cell-biochips.
TU Darmstadt
Ph.D. Thesis

Preuß, Michael (2010)
Konstitutionelle Defekte in Poly(p-phenylenvinylen)en aus Heck- und Suzuki-Polykondensationen.
TU Darmstadt, Ernst-Berl-Institut, Makromolekulare Chemie
Ph.D. Thesis, Primary publication

R

Reuter, Jens Kai (2020)
Effiziente Flammschutzformulierungen für ungesättigte Polyesterharze und Polystyrolschäume.
Technische Universität
doi: 10.25534/tuprints-00014192
Ph.D. Thesis, Primary publication, Publisher's Version

Rath, Nicole (2020)
Methods Towards Asymmetric Functionalization in Porous Systems.
Technische Universität
doi: 10.25534/tuprints-00013337
Ph.D. Thesis, Primary publication, Publisher's Version

Rüttiger, Christian (2019)
Herstellung funktionaler Blockcopolymerarchitekturen und Oberflächenfunktionalisierung auf Basis redoxresponsiver und hybrider Polymere.
Technische Universität
Ph.D. Thesis, Primary publication

Rüttiger, Christian ; Vowinkel, Steffen ; Herzog, Nicole ; Hofmann, Kathrin ; Ionescu, Emanuel ; Gallei, Markus (2018)
POSS-Containing Polymethacrylates on Cellulose-Based Substrates: Immobilization and Ceramic Formation.
In: Coatings, 8 (12)
doi: 10.3390/coatings8120446
Article, Secondary publication

Rüttiger, C. ; Pfeifer, V. ; Rittscher, V. ; Stock, D. ; Scheid, D. ; Vowinkel, S. ; Roth, F. ; Didzoleit, H. ; Stühn, B. ; Elbert, J. ; Ionescu, E. ; Gallei, M. (2016)
One for all: cobalt-containing polymethacrylates for magnetic ceramics, block copolymerization, unexpected electrochemistry, and stimuli-responsiveness.
In: Polymer Chemistry, 7 (5)
doi: 10.1039/c5py01845e
Article

Rüttiger, Christian ; Mehlhase, Sabrina ; Vowinkel, Steffen ; Cherkashinin, Gennady ; Liu, Na ; Dietz, Christian ; Stark, Robert W. ; Biesalski, Markus ; Gallei, Markus (2016)
Redox-mediated flux control in functional paper.
In: Polymer, 98
Article

Raust, Jacques-Antoine (2008)
Development of multidimensional Chromatography for complex (METH)Acrylate-based Copolymers used in cosmetic Applications.
Deutsches Kunststoff-Institut - TU Darmstadt
Ph.D. Thesis, Primary publication

Rehahn, Matthias (2003)
Elektrisch leitfähige Kunststoffe.
In: Chemie in unserer Zeit, 37
Article

Rant, U. ; Scherf, Ulrich ; Rehahn, Matthias ; Galda, Patrick ; Brédas, J. L. ; Zojer, E. (2002)
Influence on the degree of conjugation on excited state lifetimes in phenylene-based materials.
In: Synthetic Metals, 127
Article

Rehahn, Matthias (1999)
Organic-inorganic hybrid polymers.
In: Synthesis of polymers. Hrsg.: A.-D. Schlüter. - Weinheim (u.a.): Wiley-VCH, 1999 (Materials science & technology series) S. 319ff.
Book Section

Rehahn, Matthias (1998)
Organic-inorganic hybrid polymers.
In: Acta polymerica, 49
Article

Rehahn, Matthias ; Mattice, W. L. ; Suter, U. W. (1997)
Rotational isomeric state models in macromolecular systems.
Book

Rehahn, Matthias ; Knapp, R. (1996)
Pd-catalyzed synthesis of high molecular weight poly(1,1-ferrocene arylene)s.
In: The polymeric materials encyclopedia. Hrsg.: J.C. Salamone. - Boca Raton, Florida: CRC Press, 1996. S. 6132
Book Section

Rehahn, Matthias ; Rau, I. U. (1996)
Rigid-rod poly-p-phenylene polyelectrolytes.
In: The polymeric materials encyclopedia. Hrsg.: J.C. Salamone. - Boca Raton, Florida: CRC Press, 1996. S. 5850
Book Section

Rehahn, Matthias ; Schmitz, L. (1996)
Poly(imides) with dye-containing side groups.
In: The polymeric materials encyclopedia. Hrsg.: J.C. Salamone. - Boca Raton, Florida: CRC Press, 1996. S. 6285
Book Section

Rehahn, Matthias ; Schmitz, L. (1996)
Soluble, rigid-rod poly(imides) via Pd-catalyzed polycondensation.
In: The polymeric materials encyclopedia. Hrsg.: J.C. Salamone. - Boca Raton, Florida: CRC Press, 1996. S. 6300
Book Section

S

Ständecke, Laura ; Gockel, Lena ; Busch, Markus (2023)
Mixing in High-Pressure Polymerization Reactors: A Combined Experimental and Modeling Approach.
In: Chemie Ingenieur Technik, 95
doi: 10.1002/cite.202200218
Article

Stanzel, Mathias ; Kunz, Ulrike ; Andrieu-Brunsen, Annette (2023)
Layer-selective functionalisation in mesoporous double layer via iniferter initiated polymerisation for nanoscale step gradient formation.
In: European Polymer Journal, 2021, 156
doi: 10.26083/tuprints-00021757
Article, Secondary publication, Postprint

Schäfer, Jan-Lukas ; Meckel, Tobias ; Poppinga, Simon ; Biesalski, Markus (2023)
Chemical gradients in polymer-modified paper sheets—Towards single-layer biomimetic soft robots.
In: Biomimetics, 8 (1)
doi: 10.3390/biomimetics8010043
Article

Schäfer, Jan-Lukas ; Meckel, Tobias ; Poppinga, Simon ; Biesalski, Markus (2023)
Chemical Gradients in Polymer-Modified Paper Sheets — Towards Single-Layer Biomimetic Soft Robots.
In: Biomimetics, 2023, 8 (1)
doi: 10.26083/tuprints-00023169
Article, Secondary publication, Publisher's Version

Schäfer, Felix (2023)
Investigations on the influences of paper intrinsic properties and flame retardants on paper materials fire properties.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023657
Ph.D. Thesis, Primary publication, Publisher's Version

Spieß, Bianca (2023)
Oxyimide als neuartige additive Flammschutzmittel für technische Kunststoffe.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023807
Ph.D. Thesis, Primary publication, Publisher's Version

Sag, Jacob (2022)
Phosphorhaltige Flammschutzmittel aus biobasierten Plattformchemikalien.
Technische Universität
doi: 10.26083/tuprints-00020227
Ph.D. Thesis, Primary publication, Publisher's Version

Schwalm, Thorsten (2022)
Studien zum Mechanismus der GILCH-Polymerisation und zum Ermüdungsverhalten von Poly(p-phenylen-vinylen)en (PPVs) in organischen lichtemittierenden Dioden (OLEDs).
Technische Universität
doi: 10.26083/tuprints-00020645
Ph.D. Thesis, Primary publication, Publisher's Version

Sag, Jacob ; Goedderz, Daniela ; Kukla, Philipp ; Greiner, Lara ; Schönberger, Frank ; Döring, Manfred (2022)
Phosphorus-Containing Flame Retardants from Biobased Chemicals and Their Application in Polyesters and Epoxy Resins.
In: Molecules, 24 (20)
doi: 10.26083/tuprints-00015755
Article, Secondary publication, Publisher's Version

Silies, Laura ; Andrieu-Brunsen, Annette (2022)
Programming Ionic Pore Accessibility in Zwitterionic Polymer Modified Nanopores.
In: Langmuir, 34 (3)
doi: 10.26083/tuprints-00021679
Article, Secondary publication, Postprint

Silies, Laura ; Gonzalez Solveyra, Estefania ; Szleifer, Igal ; Andrieu-Brunsen, Annette (2022)
Insights into the Role of Counterions on Polyelectrolyte-Modified Nanopore Accessibility.
In: Langmuir, 34 (20)
doi: 10.26083/tuprints-00021737
Article, Secondary publication, Postprint

Stanzel, Mathias ; Brilmayer, Robert ; Langhans, Markus ; Meckel, Tobias ; Andrieu-Brunsen, Annette (2022)
Systematic study on FRET-pair functionalization of mesoporous thin films for correlation of pH-sensing and ionic mesopore accessibility.
In: Microporous and Mesoporous Materials, 282
doi: 10.26083/tuprints-00021738
Article, Secondary publication, Postprint

Stanzel, Mathias (2022)
Mesoporous film architectures and step gradient formation.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00022470
Ph.D. Thesis, Primary publication, Publisher's Version

Schultheis, Christoph (2021)
Recycling von halogenfrei flammgeschützten Kunststoffen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00018626
Ph.D. Thesis, Primary publication, Publisher's Version

Stanzel, Mathias ; Zhao, Lucy ; Mohammadi, Reza ; Pardehkhorram, Raheleh ; Kunz, Ulrike ; Vogel, Nicolas ; Andrieu-Brunsen, Annette (2021)
Simultaneous Nanolocal Polymer and In Situ Readout Unit Placement in Mesoporous Separation Layers.
In: Analytical Chemistry, 93 (13)
doi: 10.26083/tuprints-00019734
Article, Secondary publication, Publisher's Version

Schlander, Annika Maj-Britt (2021)
Synthese von polymeren kolloidalen Kristallen auf Basis von Acrylnitril und deren thermische Behandlung zu porösen Kohlenstoffen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00017948
Ph.D. Thesis, Primary publication, Publisher's Version

Sartorius, Jana ; Busch, Markus (2020)
Kinetic Investigation of Peroxide Decomposition by Calorimetry under High‐Pressure.
In: Chemie Ingenieur Technik, 92 (3)
doi: 10.1002/cite.201900081
Article

Schwenke, K. Uta ; Spiehl, Dieter ; Krauße, Marcel ; Riedler, Laura ; Ruppenthal, Anna ; Villforth, Klaus ; Meckel, Tobias ; Biesalski, Markus ; Rupprecht, Daniel ; Schwall, Gerhard (2019)
Analysis of free chlorine in aqueous solution at very low concentration with lateral flow tests.
In: Scientific reports, 9 (1)
doi: 10.1038/s41598-019-53687-0
Article

Shen, Liu-Liu ; Zhang, Gui-Rong ; Biesalski, Markus ; Etzold, Bastian J. M. (2019)
Paper-based microfluidic aluminum–air batteries: toward next-generation miniaturized power supply.
In: Lab on a Chip, 19 (20)
doi: 10.1039/c9lc00574a
Article

Schmidt, Christian Markus (2019)
Modifier und neue Flammschutzmittel für Epoxidharzformulierungen.
Technische Universität
Ph.D. Thesis, Primary publication

Shen, Liu-Liu ; Zhang, Gui-Rong ; Venter, Tizian ; Biesalski, Markus ; Etzold, Bastian J. M. (2019)
Towards best practices for improving paper-based microfluidic fuel cells.
In: Electrochimica Acta, 298
doi: 10.1016/j.electacta.2018.12.077
Article

Stamm, Jacqueline ; Spiehl, Dieter ; Jaeger, Jeannine ; Groher, Florian ; Meckel, Tobias ; Suess, Beatrix ; Dörsam, Edgar (2019)
A test system for the printing of functional nucleic acids onto different carriers and verification of its functionality by DNA dyes.
In: Journal of Print and Media Technology Research, 8 (1)
doi: 10.14622/JPMTR-1821
Article

Schöttner, Sebastian (2019)
Synthese und Funktionalisierung von amphiphilen Blockcopolymeren zur Herstellung Stimulus-responsiver und biologisch-inspirierter Membranen.
Technische Universität
Ph.D. Thesis, Primary publication

Schneider, Jan-Pierre (2019)
Neuartige amphiphile Blockcopolymere basierend auf kettenverlängerten Polyestern für duromere Anwendungen.
Technische Universität
Ph.D. Thesis, Primary publication

Schönberger, Astrid (2018)
Synthese von N-Heteroacen-funktionalisierten Polymeren als organische Halbleiter.
Technische Universität
Ph.D. Thesis, Primary publication

Sondergeld, Katrin (2018)
Synthese und Charakterisierung Polystyrol-gepfropfter Siliciumsubstrate.
Technische Universität
Ph.D. Thesis, Primary publication

Silies-Kretzschmar, Laura Elisabeth (2017)
Schaltbare Porenzugänglichkeit in polymerfunktionalisierten Silicamembranen.
Technische Universität
Ph.D. Thesis, Primary publication

Sanoria, Abhishek (2016)
Developing Raman microscopy as a routine spectroscopic technique for morphology and microstructure characterization of plastics.
Technische Universität
Ph.D. Thesis, Primary publication

Scheid, Daniel (2016)
Stimuli-responsive Kern-Schale-Partikel via Emulsionspolymerisation Ferrocen-haltiger Monomere.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Scheid, D. ; Stock, D. ; Winter, T. ; Gutmann, T. ; Dietz, C. ; Gallei, M. (2016)
The pivotal step of nanoparticle functionalization for the preparation of functional and magnetic hybrid opal films.
In: J. Mater. Chem. C, 4 (11)
Article

Schäfer, Christian Gerhard (2016)
Stimuli-Responsive Polymer-Opalfilme: Intelligente Materialien für optische Sensoranwendungen und Sicherheitsmerkmale.
Technische Universität
Ph.D. Thesis, Primary publication

Schilling, Jakob Michael (2016)
Synthetische helikal chirale Polymere als Basis für Alignmentmedien in der NMR-Spektroskopie.
Technische Universität Darmstadt
Ph.D. Thesis, Primary publication

Schäfer, C. G. ; Winter, T. ; Heidt, S. ; Dietz, C. ; Ding, T. ; Baumberg, J. J. ; Gallei, M. (2015)
Smart polymer inverse-opal photonic crystal films by melt-shear organization for hybrid core–shell architectures.
In: J. Mater. Chem. C, 3 (10)
Article

Shakun, Maria (2014)
Neue Charakterisierungsmethoden für Natriumcarboxymethylcellulosen.
TU Darmstadt
Ph.D. Thesis, Primary publication

Scheid, Daniel ; Cherkashinin, Gennady ; Ionescu, Emanuel ; Gallei, Markus (2014)
Single-Source Magnetic Nanorattles By Using Convenient Emulsion Polymerization Protocols.
In: Langmuir, 30 (5)
Article

Schuster, Tobias H. (2014)
DREIDIMENSIONALE CHARAKTERISIERUNG VON BETA-NUKLEIERTEN POLYPROPYLEN-ROHREN MIT BILDGEBUNGSVERFAHREN.
TU Darmstadt
Ph.D. Thesis, Primary publication

Sander, Regina (2013)
Synthese von bifunktionellen polymerummantelten Silika-Nanopartikeln für die Herstellung von druckbaren OLEDs.
TU Darmstadt
Ph.D. Thesis, Primary publication

Spengler, Jan (2013)
Neue Methoden für das chemische Recycling von Abfall-PET.
TU Darmstadt
Ph.D. Thesis, Primary publication

Schrautzer, Christian (2012)
Robuste Schichten aus Himbeerpartikeln.
TU Darmstadt
Ph.D. Thesis, Primary publication

Schütz, Marco (2012)
Polydibenzosuberene-Eine neue Klasse halbleitender, polymerer Emitter.
TU Darmstadt / Chemie
Ph.D. Thesis, Primary publication

Samman, Michael al (2012)
Development of two-dimensional chromatographic methods for the separation and characterization of polyesters of different degrees of branching.
TU Darmstadt
Ph.D. Thesis, Primary publication

Schwalm, Thorsten (2009)
Studien zum Mechanismus der GILCH-Polymerisation und zum Ermüdungsverhalten von Poly(p-phenylen-vinylen)en (PPVs) in organischen lichtemittierenden Dioden (OLEDs).
TU Darmstadt
Ph.D. Thesis, Primary publication

Schmelz, Oliver ; Rehahn, Matthias (2002)
Synthesis of rodlike ruthenium(II) coordination polymers having metal-nitrogen and metal-carbon bonds in their main chains.
In: e-Polymers, 2 (1)
doi: 10.1515/epoly.2002.2.1.659
Article

Schmelz, Oliver ; Rehahn, Matthias (2002)
Synthesis of rodlike ruthenium (II) coordination polymers having metal-nitrogen and metal-carbon bonds in their main chains.
In: e-Polymers
Article

Seggern, Heinz von ; Rehahn, Matthias (2001)
Mehr Information durch mehr Licht : organische Leuchtdioden für's tägliche Leben.
In: Thema Forschung
Article

T

Tom, Jessica C. ; Appel, Christian ; Andrieu-Brunsen, Annette (2021)
Fabrication and in situ functionalisation of mesoporous silica films by the physical entrapment of functional and responsive block copolymer structuring agents.
In: Soft Matter, 15 (40)
doi: 10.26083/tuprints-00019781
Article, Secondary publication, Postprint

Tran, Minh H. ; Brilmayer, Robert ; Liu, Lei ; Zhuang, Houlong ; Hess, Christian ; Andrieu-Brunsen, Annette ; Birkel, Christina S. (2020)
Synthesis of a Smart Hybrid MXene with Switchable Conductivity for Temperature Sensing.
In: ACS Applied Nano Materials, 3 (5)
doi: 10.1021/acsanm.0c00118
Article

Tom, Jessica C. ; Appel, Christian ; Andrieu-Brunsen, Annette (2019)
Fabrication and in situ functionalisation of mesoporous silica films by the physical entrapment of functional and responsive block copolymer structuring agents.
In: Soft Matter, 15 (40)
doi: 10.1039/c9sm00872a
Article

Tenzer, Dominik (2018)
Härtungskinetik von zweikomponenten Methacrylatharzen mit Inhibitoren: Reaktionsverfolgung und Simulation.
Technische Universität
Ph.D. Thesis, Primary publication

Traser, Steffen ; Wittmeyer, Patrick ; Rehahn, Matthias (2002)
Syntheses and solution properties of water-soluble poly(p-phenylene)s bearing oligo(ethylene oxide) and trialkylamino side groups.
In: e-Polymers, 2 (1)
doi: 10.1515/epoly.2002.2.1.452
Article

Traser, Steffen ; Wittmeyer, Patrick ; Rehahn, Matthias (2002)
Synthesis and properties of water-soluble poly(p-phenylene)s bearing oligo(ethylene oxide) and trialkylamino side groups.
In: e-Polymers
Article

U

Uhlein, Erik (2022)
Herstellung und Charakterisierung amphiphiler polymerer Organogele für tribologische Anwendungen.
Technische Universität
doi: 10.26083/tuprints-00021254
Ph.D. Thesis, Primary publication, Publisher's Version

Ungefug, Alexander (2019)
Untersuchungen zu haftvermittelnden Eigenschaften von hydriertem Polyethylen-b-tert-Butylmethacrylat und Polybuten-b-tert-Butylmethacrylat in Polyolefin- /Naturfaserkompositen.
Technische Universität
Ph.D. Thesis, Primary publication

Ulbricht, Daniel (2013)
Leitfähige Blendsysteme mit minimalem Rußgehalt.
TU Darmstadt
Ph.D. Thesis, Primary publication

V

Varol, H. Samet ; Förster, Claire ; Andrieu‐Brunsen, Annette (2023)
Ligand‐Binding Mediated Gradual Ionic Transport in Nanopores.
In: Advanced Materials Interfaces, 2022, 10 (8)
doi: 10.26083/tuprints-00023696
Article, Secondary publication, Publisher's Version

Vowinkel, Steffen (2019)
Kolloid-basierte Polymertemplate zur Herstellung hybrider und anorganischer poröser Architekturen.
Technische Universität
Ph.D. Thesis, Primary publication

Vowinkel, Steffen ; Boehm, Anna ; Schäfer, Timmy ; Gutmann, Torsten ; Ionescu, Emanuel ; Gallei, Markus (2018)
Preceramic core-shell particles for the preparation of hybrid colloidal crystal films by melt-shear organization and conversion into porous ceramics.
In: Materials & Design, 160
doi: 10.1016/j.matdes.2018.10.032
Article

Vowinkel, S. ; Schäfer, C. G. ; Cherkashinin, G. ; Fasel, C. ; Roth, F. ; Liu, N. ; Dietz, C. ; Ionescu, E. ; Gallei, M. (2016)
3D-ordered carbon materials by melt-shear organization for tailor-made hybrid core–shell polymer particle architectures.
In: J. Mater. Chem. C, 4 (18)
Article

Vilbrandt, Nicole (2013)
Poly(p-phenylen vinylen)e nach Gilch - Konstitutions- und Morphologieeinflüsse auf die Emissionsfarbe und das Ermüdungsverhalten in organischen LED's.
TU Darmstadt
Ph.D. Thesis, Primary publication

W

Winter, Tamara (2022)
Synthese RedOx-responsiver Partikel via starved-feed Emulsionspolymerisation zur Herstellung funktionaler Nanoarchitekturen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00019671
Ph.D. Thesis, Primary publication, Publisher's Version

Wilhelm, Sebastian (2021)
High-Pressure Polymerization of Ethene: Kinetic Investigation of Copolymerization and Chain-Transfer Reactions.
Technische Universität Darmstadt
Ph.D. Thesis

Werne, Lisa (2019)
Hydrotalcite als neuartige Treibmittel für Polyethylenschäume.
Technische Universität
doi: 10.25534/tuprints-00009298
Ph.D. Thesis, Primary publication

Weiss, Richard (2019)
Untersuchungen zur Synthese von Polymethylmethacrylaten mit lateral angebundenen Chromophoren für langzeitstabile nichtlinear-optische Effekte.
Technische Universität
Ph.D. Thesis, Primary publication

Wiebel, Sebastian (2012)
Untersuchung zur thermischen Langzeitstabilität von Epoxidharzen der elektrischen Isoliertechnik in Abhängigkeit von oxidativen Umgebungseinflüssen.
TU Darmstadt; Institut für Werkstoffkunde
Ph.D. Thesis, Primary publication

Wang, Yi ; Brunsen, Annette ; Jonas, Ulrich ; Dostalek, Jakub ; Knoll, Wolfgang (2009)
Prostate Specific Antigen Biosensor Based on Long Range Surface Plasmon-Enhanced Fluorescence Spectroscopy and Dextran Hydrogel Binding Matrix.
In: Analytical Chemistry, 81 (23)
Article

Wiesecke, Jens ; Rehahn, Matthias (2004)
New Insights into the Mechanism of the Gilch Polymerization leading to the PPV.
In: Polymer Preprints, 45
Article

Wiesecke, Jens ; Rehahn, Matthias (2003)
Paracyclophane mit definiertem Substitutionsmuster : Schlüsselverbindungen zum mechanistischen Verständnis der Gilch-Rektion zu Poly(p-phenylenvinylen).
In: Angewandte Chemie, 5
Article

Z

Zentel, Kristina Maria ; Reinbeck, Andreas ; Deckert, Christian ; Pauer, Werner ; Luinstra, Gerrit Albert (2022)
Combining Functional Prototyping of 3D Printed Reactors with a Modular Reactor Setup for Continuous Emulsion Polymerization.
In: Chemie Ingenieur Technik
doi: 10.1002/cite.202200005
Article

Zentel, Kristina Maria ; Busch, Markus (2022)
Predicting Polymer Properties via a Coupled Kinetic, Stochastic and Rheological Modeling Approach from Reaction Conditions.
In: Macromolecular Reaction Engineering, 16 (1)
doi: 10.1002/mren.202100027
Article

Zentel, Kristina Maria ; Bungu, Paul Severin Eselem ; Degenkolb, Jonas ; Pasch, Harald ; Busch, Markus (2021)
Connecting the complex microstructure of LDPE to its rheology and processing properties via a combined fractionation and modelling approach.
In: RSC Advances, 11 (55)
doi: 10.1039/D1RA03749H
Article

Zentel, Kristina Maria ; Eselem Bungu, Paul Severin ; Pasch, Harald ; Busch, Markus (2021)
Linking molecular structure to plant conditions: advanced analysis of a systematic set of mini-plant scale low density polyethylenes.
In: Polymer Chemistry, 12 (20)
doi: 10.1039/D1PY00089F
Article

Zentel, Kristina M. ; Degenkolb, Jonas ; Busch, Markus (2021)
Using a Multiscale Modeling Approach to Correlate Reaction Conditions with Polymer Microstructure and Rheology.
In: Macromolecular Theory and Simulations, 30 (1)
doi: 10.1002/mats.202000047
Article

Zieglowski, Mareike (2020)
Synthese und Charakterisierung von Polyurethanschäumen und –beschichtungen ausgehend von Lignin und Ligninderivaten.
Technische Universität
doi: 10.25534/tuprints-00014650
Ph.D. Thesis, Primary publication, Publisher's Version

Zentel, Kristina Maria ; Fassbender, Marcel ; Pauer, Werner ; Luinstra, Gerrit Albert
eds.: Moscatelli, Davide ; Sponchioni, Mattia (2020)
3D Printing as Chemical Reaction Engineering Booster.
In: Advances in Polymer Reaction Engineering
Book Section

Zhou, Cong ; Fasel, Claudia ; Ishikawa, Ryo ; Gallei, Markus ; Ikuhara, Yuichi ; Lauterbach, Stefan ; Kleebe, Hans-Joachim ; Riedel, Ralf ; Ionescu, Emanuel (2017)
One-pot synthesis of a C/SiFeN(O)-based ceramic paper with in-situ generated hierarchical micro/nano-morphology.
In: Journal of the European Ceramic Society, 37 (16)
doi: 10.1016/j.jeurceramsoc.2017.03.007
Article

Ö

Öztürk, Gökhan (2012)
Hochgefüllte Graphit-Polymer-Compounds für Einsätze im Wärmemanagement.
TU Darmstadt
Ph.D. Thesis, Primary publication