A

An, Jeongki (2020)
Design of a permanent magnet synchronous machine for hybrid electric vehicles with twin electric machines and a range extender.
Technische Universität
doi: 10.25534/tuprints-00011826
Ph.D. Thesis, Primary publication

An, Jeongki ; Gemeinder, Yves ; Binder, Andreas (2019)
Downsizing possibilities of a PM synchronous motor for a hybrid vehicle.
In: e & i Elektrotechnik und Informationstechnik, 136 (2)
doi: 10.1007/s00502-019-0708-x
Article

An, Jeongki ; Binder, Andreas (2018)
Operation strategy with thermal management of E-machines in pure electric driving mode for twin-drive-transmission (DE-REX).
IEEE-VPPC 2017. Belfort (France) (11.-14.12.2017)
Conference or Workshop Item

An, Jeongki ; Gemeinder, Yves ; Binder, Andreas (2017)
Doppel-E-Antrieb mit Range-Extender (DE-REX).
8. Expertenforum E-Motive (FVA). Schweinfurt, Germany (07.-08.09.2016)
Conference or Workshop Item

An, Jeongki ; Binder, Andreas (2016)
Analysis of sudden short-circuit of interior permanent magnet synchronous machines.
Proceedings of the Symposium on Power Electronics and Electrical Drives SPEEDAM. Capri, Italy (22.-24.06.2016)
Conference or Workshop Item

An, Jeongki ; Binder, Andreas (2016)
Permanent magnet synchronous machine design for hybrid electric cars with double e-motor and range extender.
In: e&i 133, 133 (2)
Article

An, Jeongki ; Gemeinder, Yves ; Viehmann, Andreas ; König, Ruben ; Fischer, S. ; Binder, Andreas ; Rinderknecht, Stephan ; Beidl, Christian (2016)
Doppel-E-Antrieb mit Range-Extender (DE-REX) - System-Auslegung und Betriebsstrategien am Beispiel der eingesetzten Permanentmagnet-Synchronmaschinen.
VDI-Fachtagung Innovative Antriebe. Dresden (23. - 24. November 2016)
Conference or Workshop Item

An, Jeongki ; König, R. ; Binder, Andreas (2015)
Drive concept and motor design of a double E-drive for hybrid electric vehicles.
Tagung „Advanced E-Motor Technology 2015“. Frankfurt/Main (24-26.02.2015)
Conference or Workshop Item

An, Jeongki ; Binder, Andreas (2015)
Design of Interior Permanent Magnet Synchronous Machine for Two-Drive-Transmission.
Proc. of the 3rd Int. Conf. on Electrical Systems for Aircraft, Railway, Ship propulsion and Road vehicles (ESARS). Aachen, Germany (3.-5. 3. 2015)
Conference or Workshop Item

An, Jeongki ; Binder, Andreas ; Sabirin, C. R. (2013)
Loss measurement of a 30 kW High Speed Permanent Magnet Synchronous Machine with Active Magnetic Bearings.
Proc. of the Int. Conf. ICEMS 2013. Busan, Corea (22-24.10.2013)
Conference or Workshop Item

Aoulkadi, M'hamed (2011)
Experimental Determination of Stray Load Losses in Cage Induction Machines.
TU Darmstadt, Institut für Elektrische Energiewandlung
Ph.D. Thesis, Primary publication

Aoulkadi, M'hamed ; Binder, Andreas (2007)
Influence of Auxiliary Impedance on Stray Load Loss Determination with Eh-Star Method.
Conference or Workshop Item

Aoulkadi, M'hamed ; Binder, Andreas (2007)
Comparison of different evaluation methods to determine stray load losses in induction machines with eh-star method.
Conference or Workshop Item

Ade, Michael ; Neudorfer, H. ; Binder, Andreas (2007)
Elektrische und thermische Simulationsmodelle flüssigkeitsmantelgekühlter Asynchron- und Permanentmagnet-Synchronmaschinen für den Einsatz in Hybrid-Elektrofahrzeugen.
Conference or Workshop Item

Aoulkadi, M'hamed ; Binder, Andreas (2007)
Evaluation of different Measurement Methods to Determine Stray Load Losses in Induction Machines.
In: IEEE Transactions on Industry Electronics Magazine, 54
Article

Ade, Michael ; Neudorfer, H. ; Binder, Andreas (2006)
Modellierung und Simulation des elektrischen Antriebsstrangs für Elektro- und Hybrid-Elektrofahrzeuge.
Conference or Workshop Item

Aoulkadi, M'hamed ; Binder, Andreas (2006)
Evaluation of Different Measurement Methods to Determine Stray Load Losses in Induction Machines.
Conference or Workshop Item

Aoulkadi, M'hamed ; Binder, Andreas ; Joksimovic, Gojko (2005)
Additional losses in high-speed induction machine : removed rotor test.
Conference or Workshop Item

Anders, Markus ; Binder, Andreas ; Suess, M. (2005)
A spherical linear motor as direct drive of an airborne optical infrared telescope.
Conference or Workshop Item

Aoulkadi, M'hamed ; Binder, Andreas (2005)
The Eh-star method for determination of stray load losses in cage induction machines.
Conference or Workshop Item

Aoulkadi, M'hamed ; Binder, Andreas (2005)
Comparison of different measurement methods for stray load losses in cage induction machines : Input-Output Method, RRT-Method and Eh-Star-Method.
Conference or Workshop Item

Ade, Michael ; Binder, Andreas (2004)
Modellierung der parallelen Antriebsstränge für ein Hybrid-Elektrofahrzeug vom Typ "Hybrid through the road".
In: Elektrotechnik und Informationstechnik
Article

Aoulkadi, M'hamed ; Binder, Andreas (2004)
Reverse rotation test for the measurement of stray load losses in 1.5 MW squirrel-cage induction generators.
Conference or Workshop Item

Anders, Markus ; Binder, A. (2000)
Dynamic model of an airborne permanent magnet direct telescope drive.
Conference or Workshop Item

Anders, Markus ; Schönhoff, Ulrich ; Andresen, E.-G. ; Binder, A. ; Nordmann, Rainer (2000)
Entwicklung des Stellantriebs, Simulation und Optimierung der Bildstabilität für das flugzeuggestützte Infrarotteleskop SOFIA.
In: Thema Forschung
Article

Anders, Markus ; Andresen, E. Ch. ; Binder, A. (1999)
Ein sphärischer Linearmotor als Direktantrieb eines optischen Infrarotteleskops.
In: Internationale ETG-Tage '99: München 1999. S. 507-513. - München: VDE-Verl., 1999 (ETG-Fachbericht; 79)
Book Section

Anders, Markus ; Andresen, E. Ch. ; Binder, A. (1999)
A novel spherical linear PM motor for direct driving infrared optical telescope.
Conference or Workshop Item

Anders, Markus ; Andresen, E. Ch. ; Binder, A. (1999)
Determination of thrust force ripple of a spherical linear PM motor for a direct telescope drive.
Conference or Workshop Item

B

Binder, Andreas ; Schuster, Martin ; Erd, Nicolas (2018)
Expected du/dt-effects in electrical machines fed by SiC-inverter.
Proc. Of the German-Corean Symp. 2017 on Power Electronics and Electrical Drives. Berlin (Germany) (30.06.-01.07.2017)
Conference or Workshop Item

Bergmann, G. ; Binder, Andreas (2017)
Design Guidelines of Bearingless PMSM with Two Separate Poly-Phase Windings.
Proceedings of the International Conference on Electrical Machines (ICEM). Lausanne, Switzerland (04.-07.09.2016)
Conference or Workshop Item

Binder, Andreas (2017)
High frequency effects in inverter-fed AC electric machinery.
Tutorial at the International Conference on Electrical Machines (ICEM). Lausanne, Switzerland (04.-07.09.2016)
Conference or Workshop Item

Binder, Andreas (2017)
Elektrische Maschinen und Antriebe - Übungsbuch 2017.
Book

Binder, Andreas ; Messager, Gael (2016)
Analysis of sudden short-circuit of interior permanent magnet synchronous machines.
Proceedings of Advances in Magnetics (AIM). Bormio, Italy (14.-16.03.2016)
Conference or Workshop Item

Binder, Andreas ; Lehr, Marcel (2015)
"Vergleich verschiedener elektrischer Maschinen mit Permanentmagneten im Stator zum Einsatz als Industrieantrieb".
VEM Technischer Tag 2015. Wernigerode, Deutschland (15.-16.09.2016)
Conference or Workshop Item

Binder, Andreas ; An, Jeongki ; König, Ruben (2015)
Drive concept and motor design of a double-E-drive for hybrid electric vehicles.
Advanced E-Motor Technology 2015. Frankfurt, Deutschland (24.-26. Februar 2015)
Conference or Workshop Item

Binder, Andreas (2014)
Analytische Auslegung der fremderregten Synchronmaschine.
ECPE-Cluster-Seminar “Die fremderregte Synchronmaschine”. Nürnberg (1.-2. 7. 2014)
Conference or Workshop Item

Binder, Andreas ; Canders, W.-R. (2014)
High-Speed Drives.
Tutorial at the International Conference on Electrical Machines (ICEM). Berlin (3.-5. Sept. 2014)
Conference or Workshop Item

Binder, Andreas (2013)
Hochdrehzahlantriebe und mögliche Einsatzgebiete.
Technisches Kolloquium „Welten von morgen". Igersheim-Harthausen (27.6.2013)
Conference or Workshop Item

Binder, Andreas (2012)
Elektrische Maschinen und Antriebe - Übungsbuch.
Book

Binder, Andreas (2012)
Elektrische Maschinen und Antriebe.
Book

Binder, Andreas ; Munteanu, G. (2012)
Fünfachsige magnetische Lagerung mit zwei konischen lagerlosen PM-Synchron-Halbmotoren.
11. Technischer Tag der VEM-Gruppe. Wernigerode (25.-26 .9.2012)
Conference or Workshop Item

Binder, Andreas ; Funieru, Bogdan ; Mirzaei, M. ; Zamzow, B. ; Waidhauser, R. (2011)
Forces Analysis in a Large Linear Synchronous Motor.
8th Int. Symp. On Linear Drives for Industry Application LDIA 2011. Eindhoven, Netherlands (3.-6.7.2011)
Conference or Workshop Item

Binder, Andreas ; Munteanu, G. (2011)
Entwicklung und Erprobung von lagerlosen Hochdrehzahl-PM-Synchronmaschinen,.
10. Technischer Tag der VEM-Gruppe. Wernigerode (27.-28.9.2011)
Conference or Workshop Item

Binder, Andreas ; Knopik, T. (2011)
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge.
3. VDI-Wissensforum „Hybrid- und Elektroantriebe für Kraftfahrzeuge“. Frankfurt/Main (16.-17.11.2011)
Conference or Workshop Item

Binder, Andreas ; Magdun, Oliver Narcis ; Gemeinder, Yves (2010)
EDM Bearing Currents in Inverter-Fed AC Machines.
VDE/ETG-Workshop "Stromrichtergespeiste Elektromaschinen". Hannover (08.02.2010)
Conference or Workshop Item

Binder, Andreas ; Knopik, T. (2010)
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge.
VDI-Wissensforum „Hybrid- und Elektroantriebe für Kraftfahrzeuge. Frankfurt/Main (9.-10.06.2010)
Conference or Workshop Item

Binder, Andreas ; Knopik, T. (2010)
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge, E-MOTIVE.
Expertenforum Elektrische Fahrzeugantriebe (FVA). Darmstadt (7.-8.9.2010)
Conference or Workshop Item

Binder, Andreas ; Knopik, T. (2010)
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge.
Tagungsband 3. VDI-Wissensforum „Hybrid- und Elektroantriebe für Kraftfahrzeuge“. Frankfurt/Main (9.-10.06.2010)
Conference or Workshop Item

Binder, Andreas ; Knopik, T. (2010)
Elektromotorische Antriebe für Hybrid- und Elektrofahrzeuge.
E-MOTIVE, Expertenforum Elektrische Fahrzeugantriebe (FVA). Darmstadt (7.-8.9.2010)
Conference or Workshop Item

Binder, Andreas (2009)
Hochausgenutzte Permanentmagnetsynchronmaschinen für industrielle Anwendungen.
8. Technischer Tag der VEM-Gruppe. Wernigerode (29.-30.9.2009)
Conference or Workshop Item

Binder, Andreas
ed.: Schroeder, D. (2008)
Zusatzbeanspruchungen der Drehfeldmaschine.
In: Leistungselektronische Schaltungen - Funktion, Auslegung und Anwendung
Book Section

Binder, A. ; Mütze, A. (2007)
Scaling Effects of Inverter-Induced Bearing Currents in AC Machines.
Conference or Workshop Item

Binder, A. ; Sabirin, C. R. ; Popa, D. D. ; Craciunescu, A. (2007)
Modeling and digital control of an Active Magnetic Bearing System.
In: Revue Roumaine des Sciences Techniques : Série électrotechnique et énergetique, 52
Article

Binder, A. ; Schneider, T. ; Redemann, C. (2007)
Lagerlose Motoren - eine Zukunftstechnologie?
In: Bulletin SEV/AES
Article

Binder, A. ; Doppelbauer, M. ; Gold, P. W. ; Hofmann, W. (2007)
Antriebssysteme : Innovationen - Trends -Mechatronik.
In: etz
Article

Binder, A. ; Funieru, Bogdan ; Knopik, Th. ; Güllich, P. (2007)
Ausnutzung der Eisenremanenz zur Positionserfassung beim Auswuichten von Kleinrotoren.
Conference or Workshop Item

Binder, A. (2007)
Elektrische Energietechnik - die Basis unseres Wohlstands.
Conference or Workshop Item

Binder, A. (2007)
Elektrische Energietechnik an der TU Darmstadt - Ingenieurausbildung im Puls der Zeit.
Conference or Workshop Item

Binder, Andreas ; Aoulkadi, M'hamed (2007)
Die eh-Stern-Methode - ein alternatives Messverfahren für die lastabhängigen Zusatzverluste in Asynchronmaschinen.
Conference or Workshop Item

Binder, A. ; Schneider, T. (2007)
High-speed Inverter-Fed AC Drives.
Conference or Workshop Item

Binder, A. (2007)
Energiesparen mit moderner Antriebstechnik - Potentiale und technische Möglichkeiten (Energy Savings with Modern Drive Technology - Potentials and technical Feasibility).
Conference or Workshop Item

Balzer, G. ; Binder, A. ; Hinrichsen, V. ; Mutschler, P. (2007)
125 Jahre Elektrotechnik an der TU Darmstadt.
In: etz
Article

Balzer, G. ; Binder, A. ; Hartkopf, T. ; Hinrichsen, V. ; Mutschler, P. ; Stenzel, J. (2007)
Elektrische Energietechnik : Schlüsseltechnologie der Zukunft.
In: Thema Forschung
Article

Binder, A. ; Schneider, T. (2006)
Leichtere Elektromotoren durch Hochausnutzung von Werkstoffen.
In: thema Forschung
Article

Binder, A. ; Schneider, T. ; Klohr, M. (2006)
Fixation of Buried and Surface Mounted Magnets in High-Speed Permanent-Magnet Synchronous Machines.
In: IEEE Transactions on Industry Applications, 42
Article

Binder, A. ; Sabirin, C. R. ; Popa, D. D. ; Craciunescu, A. (2006)
Modeling and Control of an Active Magnetic Bearing System.
Conference or Workshop Item

Binder, A. ; Deak, C. ; Schneider, T. (2006)
Erhöhung der Drehmomentdichte elektrischer Permanentmagnetmotoren durch Einsatz von Zahnspulentechnologie und intensivierter Kühlung.
Conference or Workshop Item

Binder, A. ; Schneider, T. ; Redemann, Ch. (2006)
Lagerlose Motoren - eine Zukunftstechnologie ?
Conference or Workshop Item

Binder, A. ; Neudorfer, H. ; Wicker, N. (2006)
Computational Investigation of two Hybrid Vehicle Energy Managements.
In: Automobiltechnische Zeitschrift : ATZ, 108
Article

Binder, A. ; Muetze, A. (2006)
Calculation of influence of insulated Bearings and insulated Inner Bearing Seats on Circulating BearingcCurrents in Machines of Inverter-Based Drive Sstems.
In: IEEE Transactions on Industry Applications, 42
Article

Binder, Andreas (2005)
Direktantriebe.
Conference or Workshop Item

Binder, Andreas ; Wick, A. ; Gold, P. W. (2005)
Antriebssysteme : Trends, Innovationen, Mechatronik.
In: Etz : Elektrotechnik und Automation ; Sonderausgabe [Beil. zu Etz]
Article

Binder, Andreas ; Mütze, Annette (2005)
Schäden sicher verhindert : Abhilfemaßnahmen für umrichterbedingte Lagerströme in Industrieantrieben.
In: Antriebstechnik
Article

Binder, Andreas ; Klohr, Markus ; Schneider, Tobias (2005)
Losses in high speed permanent magnet motor with magnetic levitation for 40000/min, 40 kW.
In: International Journal of Electrical Engineering in Transportation, 1 (1)
Article

Binder, Andreas ; Schneider, Tobias (2005)
Permanent magnet synchronous generators for regenerative energy conversion : a survey.
Conference or Workshop Item

Binder, Andreas ; Schneider, Tobias ; Klohr, Markus (2005)
Fixation of buried and surface mounted magnets in highspeed permanent magnet synchronous motors.
Conference or Workshop Item

Binder, Andreas (2004)
High-speed drives with permanent-magnet machines and active magnetic bearings.
Conference or Workshop Item

Binder, Andreas ; Klohr, Markus ; Schneider, Tobias (2004)
Losses in high speed permanent magnet motor with magnetic levitation for 40000/min, 40 kW.
16th International Conference on Electrical Machines. Cracow, Poland (05.-08.09.2004)
Conference or Workshop Item

Binder, Andreas (2004)
Ingenieurausbildung heute für die Antriebstechnik von morgen!
In: Konstruktion
Article

Binder, Andreas ; Schneider, Tobias ; Klohr, Markus (2004)
Befestigung von vergrabenen vs. Oberflächenmagneten bei Hi-Speed-Permanentmagnet-Motoren.
Conference or Workshop Item

Binder, Andreas ; Zamzow, P. ; Löser, F. (2004)
Investigation of influence of asymmetries on currents in long stator winding of TRANSRAPID linear motor.
Conference or Workshop Item

Binder, Andreas ; Klohr, Markus ; Lu, Tong ; Hackmann, Wilhelm (2004)
High-speed drives with permanent-magnet machines and active magnetic bearings.
Conference or Workshop Item

Binder, Andreas (2003)
Transformatoren : theoretische Grundlagen.
Technische Akademie Esslingen: Lehrgang. Ostfildern (16.-17.10.2003)
Conference or Workshop Item

Binder, Andreas (2003)
Hochtourige Antriebe mit Permanentmagnetmaschinen und aktiver Magnetlagerung.
Informationsveranstaltung Mechatronik, VDMA. Frankfurt am Main (21.2.2003)
Conference or Workshop Item

Binder, Andreas ; Wick, A. ; Pollmeier, S. (2003)
Vernetzte Antriebe : aktueller Stand und Trends.
In: ETZ, Elektrotechnische Zeitschrift
Article

Binder, Andreas ; Hofmann, Martina ; Werle, Thomas (2003)
Lineare Booster-Konzepte für die elektrische Traktion.
In: EB, Elektrische Bahnen, 101
Article

Binder, Andreas ; Reichert, K. (2003)
Elektrische Maschinen und Antriebe : Auswahl, Auslegung und Dimensionierung.
Kurs VDE Lebenslanges Lernen. Frankfurt/Main (26.-28.11.2003)
Conference or Workshop Item

Binder, Andreas (2003)
Direktantriebe.
Conference or Workshop Item

Binder, Andreas (2002)
Transformatoren : theoretische Grundlagen.
Technische Akademie Esslingen: Lehrgang. Ostfildern (17.-18.10.2002)
Conference or Workshop Item

Binder, Andreas ; Werle, T. (2001)
Traction systems with linear machines for railway systems.
In: Communications
Article

Binder, Andreas ; Körner, O. (2001)
Im Rausch der Geschwindigkeit - was treibt den ICE - Antriebstechnik für die neue Bahn.
In: 2-B-ING: Facts für junge Leute
Article

Binder, Andreas ; Koch, Thomas (2001)
Permanent magnet gearless traction drive for German high speed train ICE 3.
Conference or Workshop Item

Binder, Andreas (2000)
Switched reluctance drive and inverter-fed induction machine - a comparison of design parameters and drive performance.
In: Electrical engineering, 82
Article

Binder, Andreas (2000)
Comparison of motor types with respect to system integration.
Conference or Workshop Item

Binder, Andreas ; Körner, O. (2000)
Entwicklungsperspektiven des Tatzlagerantriebs für höhere Geschwindigkeiten.
Conference or Workshop Item

Binder, Andreas ; Werle, T. ; Hofmann, M. ; Bruno, O. ; Lupo, P. (2000)
Analytical investigations of asynchronous linear motor with conventional rail as secondary.
Conference or Workshop Item

Binder, Andreas ; Schrepfer, A. (1999)
Lagerströme bei umrichtergespeisten Drehstrommotoren.
In: Antriebstechnik, 38
Article

Binder, Andreas (1999)
DC-Machines.
In: Wiley encyclopedia of electrical and electronic engineering. Vol. 5. S. 63-77. - New York, NY: Wiley, 1999
Book Section

Binder, Andreas ; Körner, O. ; Pfeiffer, R. ; Jöckel, A. (1999)
Optimum torque transmission for high-speed locomotives: Cardan hollow shaft or axle-hung drive?
Conference or Workshop Item

Binder, Andreas
ed.: Webster, J. G. (1999)
DC Machines.
In: Encyclopedia of Electrical and Electronics Engineering
Book Section

Binder, Andreas ; Greubel, ; Piepenbreier, ; Tölle, (1998)
Permanent-magnet synchronous drive with wide field-weakening range.
In: ETEP: European transactions on electrical power. 8 (1998), H. 5/6, S. 157-166
Article

Binder, Andreas ; Schrepfer, (1998)
Bearing currents in induction machines due to inverter supply.
Conference or Workshop Item

Binder, Andreas ; Storath, (1998)
Comparison of square-wave and sine-wave fed permanent magnet synchronous servo motors.
Conference or Workshop Item

Binder, Andreas (1998)
Comparison of switched-reluctance and inverter-fed alternating current drives.
Conference or Workshop Item

Binder, Andreas (1998)
Electromagnetic interference of brake stray fields on resolvers in brushless d.c. servo drives.
In: Mathematics and computers in simulation. 46 (1998), H. 3-4, S. 339-347
Article

Binder, Andreas ; Storath, ; Kaumann, (1998)
Moderne Arbeitstechnik spart Energie : ein Vergleich energieeffizienter Drehstrommotoren.
In: Elektrie. 52 (1998), H.1/2, S. 47-55
Article

Binder, Andreas (1998)
Professor Emeritus Dr.-Ing. Egon Christian Andresen 70 Jahre: Laudatio anläßlich des 70. Geburtstages von Herrn Prof. Andresen.
In: Elektrie. 52 (1998), H. 7-9, S. 182
Article

Binder, Andreas ; Aust, ; Schrepfer, (1998)
Bearing currents - a danger to inverter-fed A.C. motors?
Conference or Workshop Item

Binder, Andreas (1997)
Electromagnetic interference of brake stray fields on resolvers in brushless d.c. servo drives.
In: Mathematics and computers in simulation. 1506 (1997), S. 1-9
Article

Binder, Andreas ; Jungkunz, Clemens (1997)
Entwurf und Bau eines Prototypmagnetlagers SIMAB.
3. Zittauer Workshop Magnetlagertechnik. Zittau, Germany (11.-12.09.1997)
Conference or Workshop Item

Binder, Andreas ; Taylor, (1997)
Ertüchtigung der Frequenzumrichtertechnik für den Einsatz in Umrichtermotoren.
In: Antriebstechnik. 36 (1997), H. 7, S. 42-44
Article

Binder, Andreas
ed.: Reichert, K. (1996)
"Motor- und Kabelbelastung durch Umrichter".
In: "Messen von Betriebsparametern elektrischer Antriebe"
Book Section

C

Clauer, Maximilian ; Binder, Andreas (2022)
Automated Fast Semi-Analytical Calculation Approach for a Holistic Design of a PMSM in Hybrid Electric Vehicles.
International Conference on Electrical Machines (ICEM'22). Valencia, Spain (05.-08.09.2022)
doi: 10.1109/ICEM51905.2022.9910875
Conference or Workshop Item

Chevailler, S. ; Feng, Lin ; Binder, A. (2007)
Short-Circuit Faults in Distributed and Concentrated Windings of PM Synchronous Motors.
Conference or Workshop Item

Cui, X. ; Binder, A. ; Schlemmer, E. (2007)
Straight-Flow Permanent Magnet Synchronous Generator Design for Small Hydro Power Plants.
Conference or Workshop Item

Cui, X. ; Funieru, Bogdan ; Binder, A. (2006)
PM Generator No-Load Additional Loss Calculation Using FE Models with an Equivalent Current Layer.
Conference or Workshop Item

Cui, X. ; Funieru, Bogdan ; Binder, A. (2006)
Calculation of No-Load Additional Losses in the Rotor of StrafloMatrixTM Synchronous Turbine-Generators.
Conference or Workshop Item

Cui, Xiaoli ; Binder, Andreas (2004)
Steady-state performance calculation of a permanent magnet synchronous hydropower generator.
Conference or Workshop Item

D

Dietz, Daniel ; Binder, Andreas (2022)
Indirect Efficiency Measurement and Levitation Property Determination for High-Speed Bearingless PM Synchronous Machines.
13. GMM/ETG-Fachtagung Innovative Kleinantriebs-und Kleinmotorentechnik. Linz, Österreich (14-15.9.2022)
Conference or Workshop Item

Deusinger, Björn ; Binder, Andreas (2022)
Influence of the Machine Design on the Indirect Efficiency Determination of Permanent-Magnet Synchronous Machines.
12th International Conference Energy Efficiency in Motor Driven Systems (EEMODS'22). Stuttgart, Germany (03.-05.05.2022)
Conference or Workshop Item

Deusinger, Björn ; Binder, Andreas (2022)
Evaluation of a new proposed indirect efficiency determination method for permanent-magnet synchronous machines.
In: e & i Elektrotechnik und Informationstechnik, 139 (2)
doi: 10.1007/s00502-022-01004-5
Article

Dietz, Daniel (2022)
Design of a Bearingless Permanent Magnet Synchronous Machine with a Star Point-Connected Axial Active Magnetic Bearing.
Technische Universität
doi: 10.26083/tuprints-00020975
Ph.D. Thesis, Primary publication, Publisher's Version

Dietz, Daniel ; Binder, Andreas (2021)
Eddy Current Influence on the Control Behaviour of Bearingless PM Synchronous Machines.
In: IEEE Transactions on Industry Applications, 57 (6)
doi: 10.1109/TIA.2021.3084120
Article

Dietz, Daniel ; Binder, Andreas (2021)
Operational constraints of zero-sequence current feeding in bearingless PM synchronous machines.
In: e & i Elektrotechnik und Informationstechnik, 138 (6)
doi: 10.1007/s00502-021-00902-4
Article

Dietz, Daniel ; Binder, Andreas (2021)
Bearingless PM Synchronous Machine with Axial Active Magnetic Bearing fed by a Zero-Sequence Current.
42. Internationales Wiener Motorensymposium. virtual Conference (29.-30.04.2021)
Conference or Workshop Item

Dietz, Daniel ; Binder, Andreas (2021)
Comparison Between NdFeB and SmCo Permanent Magnets Regarding Eddy Currents in Bearingless PM Synchronous Machines.
17th International Symposium on Magnetic Bearing. virtual Conference (18.-21.08.2021)
Conference or Workshop Item

Dietz, Daniel ; Binder, Andreas (2021)
Influence of Magnetic Eccentricity in Bearingless PM Synchronous Machines.
17th International Symposium on Magnetic Bearing. virtual Conference (18.-21.08.2021)
Conference or Workshop Item

Deusinger, Björn ; Binder, Andreas (2021)
Direktantriebe für die elektrische Traktion - Ein Überblick über Vor- und Nachteile.
In: Elektrische Bahnen, 119 (6)
Article

Dietz, Daniel ; Binder, Andreas (2021)
Design Guidelines and Scaling Effects for bearingless PM Synchronous Machines accounting for Eddy Current Reaction Field.
In: IEEE Transactions on Industry Applications, 57 (6)
doi: 10.1109/TIA.2021.3083673
Article

Dietz, Daniel ; Binder, Andreas (2021)
Bearingless PM-synchronous machine with axial active magnetic bearing fed by zero-sequence current.
In: e & i Elektrotechnik und Informationstechnik, 138 (2)
doi: 10.1007/s00502-021-00867-4
Article

Deusinger, Björn ; Binder, Andreas (2020)
Update on the indirect efficiency determination of permanent-magnet synchronous machines.
10th International Motor Summit for energy efficient motor driven systems. Zurich, Switzerland (18.-19.11.2020)
Conference or Workshop Item

Dietz, Daniel ; Binder, Andreas (2019)
Influence of PM-Material on the parameter uncertainty of Bearingless Synchronous Machines.
12. Fachtagung Innovative Klein- und Mikroantriebstechnik (IKMT 2019); 12. ETG/GMM-Symposium. Würzburg, Deutschland (10.-11.09.)
Conference or Workshop Item

Dietz, Daniel ; Binder, Andreas (2018)
Bearingless PM synchronous machine with zero-sequence current driven star point-connected active magnetic thrust bearing.
In: Transportation Systems and Technology, 4 (3)
doi: 10.17816/transsyst2018435-25
Article

Dietz, Daniel ; Messager, Gael ; Binder, Andreas (2018)
A 1 kW/60000 min-1 bearingless PM motor with combined winding for torque and rotor suspension.
In: IET Electric Power Applications Journal, 12 (8)
Article

Deusinger, Björn ; Binder, Andreas (2018)
Quantitative Analysis and Finite Element Modeling for Indirect Efficiency Determination of Permanent Magnet Machines.
10th Int. Conf. on Energy Efficiency in Motor Drive Systems (EEMODS). Rome (Italy) (06.-08.09.2017)
Conference or Workshop Item

Dietz, Daniel ; Binder, Andreas (2018)
Critical review on the benefits of C- and E-Core Flux-Switching-PM-Machines.
Proc. 19th Int. Conf. El. Drives & Power Electr. (EDPE 2017). Dubrovnik (Croatia) (04.-06.10.2017)
Conference or Workshop Item

Deusinger, Björn ; Binder, Andreas (2018)
Bestimmung des Wirkungsgrads von permanentmagneterregten Synchronmaschinen im Einzelverlustverfahren.
16. Technischer Tag der VEM-Gruppe. Wernigerode (Deutschland) (10.-11.10.2017)
Conference or Workshop Item

Dietz, Daniel ; Binder, Andreas (2018)
A Bearingless PM Synchronous Machine with a Zero- Sequence Current Driven Star Point-Connected Active Magnetic Thrust Bearing.
24th International Conference on Magnetically Levitated Systems and Linear Drives (MAGLEV 2018). St. Petersburg, Russia (05.-08.09.2018)
Conference or Workshop Item

Dietz, Daniel ; Messager, Gael ; Binder, Andreas (2018)
1 kW / 60000/min bearingless PM synchronous machine with zero-sequence current driven star point-connected active magnetic thrust bearing.
In: Transportation Systems and Technology
Article

Deusinger, Björn ; Binder, Andreas (2017)
Different rotor geometry concepts for high pole count permanent magnet machines with buried magnets.
24th Int. Workshop on Rare-Earth and Future Permanent Magnets and their Applications (REPM). Darmstadt (29.08.-01.09.2016)
Conference or Workshop Item

Deusinger, Björn ; Binder, Andreas (2015)
Indirect efficiency determination of permanent magnet synchronous machines for sine wave and inverter operation.
9th Int. Conf. on Energy Efficiency in Motor Drive Systems (EEMODS). Helsinki (15.-17.9.2015)
Conference or Workshop Item

Deusinger, Björn ; Lehr, Marcel ; Binder, Andreas (2014)
Determination of efficiency of permanent magnet synchronous machines from summation of losses.
Proceedings of the Symposion on Power Electronics and Electrical Drives (SPEEDAM). Ischia, Italy (18.-20.6.2014)
Conference or Workshop Item

Deak, Csaba Zsolt (2012)
Modular permanent-magnet synchronous motors with high electromagnetic utilization.
TU Darmstadt
Ph.D. Thesis

Dewenter, S. ; Binder, Andreas ; Strauch, M. (2012)
Simulation model for a serial hybrid bus and comparison with measurements of the real bus.
IEEE-VPPC 2012. Seoul, Korea (Oct. 9-12 2012)
Conference or Workshop Item

Dewenter, S. ; Binder, Andreas ; Holub-Krappe, E. (2011)
Green Move – Hybridbusse für Darmstadt.
Techn. Tagung „Hybridnahverkehrsbusse“. Haus der Technik (27.-28.9.2011)
Conference or Workshop Item

DeGersem, H. ; Henze, O. ; Weiland, Thomas ; Binder, Andreas (2010)
Simulation of wave propagation effects in machine windings.
In: COMPEL, 29 (1)
Article

DeGersem, H. ; Henze, O. ; Weiland, Thomas ; Binder, Andreas (2010)
Eddy-current formulation for constructing transmission-line models for machine windings.
In: The European Physical Journal Applied Physics, 49 (31101)
Article

Deak, Cs. ; Binder, A. (2007)
Increased torque density of permanent-magnet motors using concentrated windings and intensive cooling.
Conference or Workshop Item

Deak, Cs. ; Binder, A. (2007)
Design of Compact Permanent-Magnet Synchronous Motors with Concentrated Windings.
In: Revue Roumaine des Sciences Techniques : série électrotechnique et énergetique, 52
Article

De Gersem, Herbert ; Muetze, A. ; Binder, A. ; Weiland, Thomas (2006)
Finite-Element Simulation of the Common-Mode Flux in Inverted-Fed Induction Machines.
Conference or Workshop Item

Deak, C. ; Binder, A. (2006)
Highly utilised Permanent Magnet Synchronous Machines with Tooth-wound Coils for Industrial Applications.
In: Electromotion, 13
Article

Deak, C. ; Binder, A. (2006)
Design of Compact Permanent-Magnet Synchronous Motors with Concentrated Windings.
Conference or Workshop Item

Deak, C. ; Binder, A. ; Magyari, K. (2006)
Magnet Loss Analysis of Permanent-Magnet Synchronous Motors with Concentrated Windings.
Conference or Workshop Item

De Gersem, Herbert ; Mütze, A. ; Binder, A. ; Weiland, Thomas (2006)
Finite Element Simulation of the Common-Mode Flux in Inverted-fed Induction Machines.
Conference or Workshop Item

Deak, Cs. ; Binder, Andreas (2005)
Highly utilised permanent-magnet synchronous machines with tooth-wound coils for industrial applications.
Conference or Workshop Item

E

Erd, Nicolas ; Binder, Andreas (2022)
Eddy Currents in the Solid Rotor Yoke of a High-Torque PMSM with Tooth-Coil Winding.
International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM'22). Sorrento, Italy (22.-24.06.2022)
doi: 10.1109/SPEEDAM53979.2022.9842160
Conference or Workshop Item

Erd, Nicolas ; Binder, Andreas (2021)
Design and Manufacturing of a High Torque PMSM with Tooth-Coil Winding and Solid Rotor Yoke.
11th International Electric Drives Production Conference. Erlangen, Germany (07.-09.12.2021)
doi: 10.1109/EDPC53547.2021.9684197
Conference or Workshop Item

Erd, Nicolas ; Binder, Andreas (2021)
Scaled Prototype of a Redundantly Fed Gearless PMSM Wind Generator with Tooth Coil Winding and Solid Rotor Yoke.
8. Fachtagung VDE Antriebssysteme - Elektromechanische Antriebssysteme 2021. virtual Conference (09.-10.11.2021)
Conference or Workshop Item

Erd, Nicolas ; Köster, Robin ; Binder, Andreas (2020)
Computational Analysis of Air Gap Field in Electrical Machines by Fourier Coefficient Matrices.
2020 International Conference on Electrical Machines. virtual Conference (23.-26.08.2020)
doi: 10.1109/ICEM49940.2020.9270692
Conference or Workshop Item

Erd, Nicolas ; Binder, Andreas (2020)
Concentrated Windings for Wind Generators with Solid Rotor Iron and Redundant Feeding.
2020 International Conference on Electrical Machines. virtual Conference (23.-26.08.2020)
doi: 10.1109/ICEM49940.2020.9270688
Conference or Workshop Item

Erd, Nicolas ; Binder, Andreas (2020)
Optimale Auslegung von getriebelosen, permanentmagneterregten Windgeneratoren mit Zahnspulenwicklung und massivem Rotorjoch.
In: e & i Elektrotechnik und Informationstechnik, 137 (4-5)
doi: 10.1007/s00502-020-00808-7
Article

Erd, Nicolas ; Binder, Andreas (2019)
Eddy Currents in Solid Rotor under Spatially Intermittent Feeding of the Stator Winding.
Proceedings of the International Conference on Electrical Machines. Alexandroupoli, Griechenland (03. - 06.09.2018)
Conference or Workshop Item

Erd, Nicolas ; Binder, Andreas (2019)
Numerical and Analytical Analysis of Wave Harmonics under Spatially Intermittent Feeding.
Proceedings of the International Conference on Electrical Machines. Alexandroupoli, Griechenland (03. - 06.09.2018)
Conference or Workshop Item

Erd, Nicolas ; Li, Xing ; Binder, Andreas (2018)
Power Flow Simulation of Flywheel Energy Storage Systems for Tramways.
ICREPQ 2017. Malaga (Spain) (04.-06.04.2017)
Conference or Workshop Item

F

Fehn, Patrick ; Krämer, André ; Deusinger, Björn ; Binder, Andreas (2021)
Design of a synchronous reluctance motor using changed symmetry properties of the rotor geometry.
8. Fachtagung VDE Antriebssysteme - Elektromechanische Antriebssysteme 2021. virtual Conference (09.-10.11.2021)
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2015)
Simulation of Electrical Machines End Effects with Reduced Length 3D FEM Models.
ICEM 2012. Marseille, France (2-4.9.2012)
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2014)
3D numerical calculation method of electrical machines with time efficient air gap coupling and stabilized torque and force calculation.
Proceedings of the International Conference on Electrical Machines (ICEM). Berlin (3.-5. Sept. 2014)
Conference or Workshop Item

Funieru, Bogdan ; Esteves-Albieri, G. ; Binder, Andreas (2013)
Design of a Reduced Size Demonstrator Used for Validation of the Direct Drive Wind Generator Loss Calculation Models.
In: Electromotion, 20
Article

Funieru, Bogdan ; Binder, Andreas (2013)
Design of a PM Direct Drive Synchronous Generator used in a Tidal Stream Turbine.
Proc. of the Int. Conf. Clean Electrical Power (IEEE-ICCEP). Alghero, Sardegna, Italy (11.-13. 6. 2013)
Conference or Workshop Item

Funieru, Bogdan ; Mirzaei, M. ; Binder, Andreas (2011)
Full and Simplified Loss Calculation FEM Models for Segmented Surface Permanent Magnet Machines.
Proc. of the Int. Conf. COMPUMAG. Sydney, Australia (12.-15.7.2011)
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2010)
Simulation of the Air gap in 3D Models of Electrical machines.
Proc. of the 14th Int. IGTE Symposium on Numerical Field Calculation in Electrical Engineering. Graz, Austria (19.-22.9.2010)
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2010)
Simulation of the Air gap in 3D Models of Electrical machines.
Proc. of the 14th Int. IGTE Symposium on Numerical Field Calculation in Electrical Engineering. Graz, Austria (19.-22.9.2010)
Conference or Workshop Item

Funieru, Bogdan ; Binder, A. (2007)
Losses and forces due to eddy currents in a magnetically non-linear conductive half space.
In: Electrical Engineering (Archiv für Elektrotechnik), 90
Article

Funieru, Bogdan ; Binder, A. (2007)
Analysis of the force output and generated losses of a linear DC actuator supplied with a power electronic converter.
Conference or Workshop Item

Funieru, Bogdan ; Binder, A. (2007)
Design of a linear transversal flux DC actuator used for railway applications.
Conference or Workshop Item

Feng, L. ; Binder, A. ; Rentschler, A. ; Paweletz, A. ; Guenther, D. (2006)
Fault Investigation of X-by-wire Permanent Magnet Synchronous Machine.
Conference or Workshop Item

Feng, Lin ; Rentschler, A. ; Binder, A. ; Paweletz, A. (2006)
Fault model of an Inverter-fed PM motor for x-by-wire systems.
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2005)
Comparison of measurements and calculations of a DC linear actuator designed for railway applications.
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2005)
Linear DC actuator used as a tractive effort booster for wheel-grip loss situation.
Conference or Workshop Item

Feng, Lin ; Binder, Andreas (2004)
Fault-tolerant steer-by-wine actuator for automotive applications.
Conference or Workshop Item

Funieru, Bogdan ; Binder, Andreas (2004)
Designing of an electromagnetic actuator for railway applications using FE programs.
Conference or Workshop Item

G

Gemeinder, Yves ; An, Jeongki ; Binder, Andreas (2019)
Concept Study of the electrical machines for the twin-drive range- extender propulsion system (DE-REX).
10th Expert Forum E-MOTIVE, Int. Conf. on Electric Vehicle Drives. Stuttgart (12. - 13.09.2018)
Conference or Workshop Item

Gemeinder, Yves ; Binder, Andreas (2018)
Konstruktion und Aufbau einer IPMSM für den Doppel-E-Antrieb mit Range Extender (DE-REX).
10. Tagung „El. Antriebstechnologie für Hybrid- und Elektrofahrzeuge“. Würzburg (Deutschland) (27.-28.09.2017)
Conference or Workshop Item

Gemeinder, Yves ; Binder, Andreas (2017)
Analyse von Betriebsparametereinflüssen auf Lagerströme durch Monitoring.
15. Technischer Tag der VEM-Gruppe. Wernigerode, Germany (18.-19.10.2016)
Conference or Workshop Item

Gessese, Y. ; Binder, Andreas (2015)
Design and analysis of specific high-speed solid rotor induction motor with copper end rings.
IEEE-CEFC 2010. Chicago (9.-12.5.2010)
Conference or Workshop Item

Gemeinder, Yves ; Schuster, Martin ; Binder, Andreas ; Radnai, B. ; Sauer, B. (2014)
Calculation and validation of a bearing impedance model for ball bearings and the influence on EDM-currents.
Proceedings of the International Conference on Electrical Machines (ICEM). Berlin (3.-5. Sept. 2014)
Conference or Workshop Item

Gemeinder, Yves ; Magdun, O. ; Binder, Andreas (2013)
Schmierstoffeinfluss auf EDM-Lagerströme und Maßnahmen zu ihrer Verringerung.
12. Technischer Tag der VEM-Gruppe. Wernigerode (24-25.9.2013)
Conference or Workshop Item

Gholizad, H. ; Binder, Andreas (2012)
Design and Modelling of a Variable Impedance Induction Motor.
SPEEDAM 2012. Sorrento, Italy (20.-22.6.2012)
Conference or Workshop Item

Gholizad, H. ; Binder, Andreas (2011)
Analytical Modelling of variable Impedance Induction Machines.
Proc. of the Int. Conf. IEEE-IEMDC. Niagara Falls, Canada (15.-18.5.2011)
Conference or Workshop Item

Gholizad, H. ; Binder, Andreas (2011)
Measurement results of a Variable Impedance Induction Motor prototype.
Tagungsband der Konf. „Elektrisch-mechanisch-hydraulische Antriebssysteme. Nürtingen (13.-14.9.2011)
Conference or Workshop Item

Gessese, Y. ; Binder, Andreas (2010)
Analysis of the effect of radial surface grooves on motor losses of high speed solid rotor induction motor.
20th Int. Symp. On Power Electronics, Ele. Drives, Automation and Motion SPEEDAM 2010. Pisa, Italy (14.-16. June 2010)
Conference or Workshop Item

Gholizad, H. ; Funieru, Bogdan ; Binder, Andreas (2009)
Direct Modeling of Motional Eddy Currents in Highly Saturated Solid Conductors by Magnetic Equivalent Circuit Method.
In: IEEE Trans. on Magnetics, 45 (3)
Article

Gholizad, H. ; Funieru, Bogdan ; Binder, A. ; Mirsalim, M. (2007)
A modified magnetic equivalent circuit method for calculating the motional eddy current.
Conference or Workshop Item

Gautam, N. ; Rentschler, A. ; Schneider, T. ; Binder, A. (2006)
Modeling and analysis of parallel connected permanent magnet synchronous generators in a small hydropower plant.
In: WSEAS Transactions on Power Systems, 1
Article

H

Hagen, Reinhard (2014)
Die Berechnung der Drehstrom-Käfigläufer-Asynchronmaschine mit Berücksichtigung der Zusatzverluste bei Netz- und Umrichterbetrieb.
TU Darmstadt
Ph.D. Thesis, Primary publication

Henze, O. ; Rocks, A. ; De Gersem, Herbert ; Weiland, Thomas ; Hinrichsen, V. ; Binder, A. (2007)
A network model for inverter-fed induction-motor drives.
Conference or Workshop Item

Hackmann, Wilhelm ; Binder, Andreas (2004)
Aussenläufer-Transversalflussmaschinen für Radnabenantriebe in Straßenbahnen.
Conference or Workshop Item

Hackmann, Wilhelm ; Binder, Andreas (2004)
Comparison of induction motor, permanent magnet motor and transversal flux motor for wheel hub drives in street cars.
Conference or Workshop Item

Hackmann, Wilhelm ; Binder, Andreas (2003)
Design and performance measurements of a permanent-magnet wheel-hub drive including cross-saturation and minimum-loss operation.
Conference or Workshop Item

Hofmann, Martina ; Binder, A. ; Pfeiffer, R. (2001)
Investigations of a linear induction machine for railway applications.
Conference or Workshop Item

Hofmann, Martina ; Werle, T. ; Binder, A. ; Pfeiffer, R. (2000)
Asynchronous linear machine for railway systems.
Conference or Workshop Item

Hagenkort, Bert ; Hartkopf, Thomas ; Binder, Andreas ; Jöckel, Stephan (2000)
Modelling a direct drive permanent magnet induction machine.
Conference or Workshop Item

Hofmann, Martina ; Werle, T. ; Pfeiffer, R. ; Binder, A. (1999)
2D und 3D numerical field computation of eddy-current brakes for traction.
Conference or Workshop Item

J

Janjic, B. ; Binder, Andreas (2013)
Optimierung eines magnetisch gelagerten integrierten Antriebs für eine Axialpumpenstufe aus strömungstechnischer Sicht.
Elektrisch-mechanisch-hydraulische Antriebssysteme 2013. Nürtingen (17-18.9.2013)
Conference or Workshop Item

Janjic, B. ; Binder, A. ; Bischof, V. ; Ludwig, G.
ed.: Binder, Andreas (2008)
Entwurf und Bau eines magnetgelagerten integrierten Pumpenantriebs.
Conference or Workshop Item

Janjic, B. ; Binder, A. ; Bischof, V. ; Ludwig, G. (2007)
Design of PM integrated motordrive systems for axial pumps.
Aalborg, Denmark (2007, 2-5 September)
Conference or Workshop Item

Joksimovic, Gojko ; Binder, Andreas (2004)
Additional no-load losses in inverter-fed high-speed cage induction motors.
In: Electrical engineering (Archiv für Elektrotechnik), 86 (2)
doi: 10.1007/s00202-003-0185-3
Article

Jöckel, Andreas ; Koch, Thomas ; Binder, Andreas (2002)
Getriebelose Antriebe für den ICE der nächsten Generation.
Conference or Workshop Item

Jöckel, Andreas ; Binder, A. ; Körner, O. ; Pfeiffer, R. (1999)
Tatzlager-Lokomotivantrieb für 200 km/h.
Conference or Workshop Item

K

Köster, Robin (2023)
Direct Drive Wind Generators with Superconducting Excitation in the Multi-MW Class.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00024728
Ph.D. Thesis, Primary publication, Publisher's Version

Köster, Robin ; Binder, Andreas (2022)
Medium-Speed Wind Turbine Generators with HTS Excitation Winding.
International Conference on Electrical Machines (ICEM'22). Valencia, Spain (05.-08.09.2022)
doi: 10.1109/ICEM51905.2022.9910850
Conference or Workshop Item

Köster, Robin ; Binder, Andreas (2022)
Eddy Current Loss Estimation for Direct Drive Wind Turbine Generators with Superconducting Excitation Winding by Numerical and Analytical Models.
In: International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, (Early Access)
doi: 10.1002/jnm.3066
Article

Köster, Robin ; Binder, Andreas (2022)
Electromagnetic Design Considerations on HTS Excited Homopolar Inductor Alternators.
International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM'22). Sorrento, Italy (22.-24.06.2022)
doi: 10.1109/SPEEDAM53979.2022.9842224
Conference or Workshop Item

Köster, Robin ; Binder, Andreas (2022)
Multi-objective optimization of a direct-drive wind turbine generator with HTS excitation winding.
In: IEEE Transactions on Applied Superconductivity, 32 (4)
doi: 10.1109/TASC.2022.3143088
Article

Köster, Robin ; Binder, Andreas (2022)
Keynote address: Trends in E-Machines Using Superconductors.
International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM'22). Sorrento, Italy (22.-24.06.2022)
Conference or Workshop Item

Köster, Robin ; Binder, Andreas (2021)
Cost-Oriented Design Considerations on Direct-Drive Wind Turbine Generators with Superconducting Excitation Winding.
International Joint Conference OPTIM-ACEMP. virtual Conference (02.-04.09.2021)
doi: 10.1109/OPTIM-ACEMP50812.2021.9590077
Conference or Workshop Item

Köster, Robin ; Deusinger, Björn ; Binder, Andreas (2021)
Export of Uncompressed JMAG Field Solution Data for Custom Post-Processing and Visualization.
2021 JMAG & PSIM Users Conference. virtual Conference (27.09.-01.10.2021)
Conference or Workshop Item

Köster, Robin ; Binder, Andreas (2021)
Multi-objective optimization of a direct-drive wind turbine generator with HTS excitation winding.
In: IEEE Transactions on Applied Superconductivity, 32 (4)
doi: 10.1109/TASC.2022.3143088
Article

Köster, Robin ; Binder, Andreas (2021)
Damper design in superconducting wind turbine generators by analytical and numerical models.
12th International Symposium on Electric and Magnetic Fields. virtual Conference (06.-08.07.2021)
Conference or Workshop Item

König, Ruben ; Rinderknecht, Stephan ; Anderson, J. A. ; Binder, A. (2013)
Effizienzsteigerung durch optimale Abstimmung von Getriebe und E-Maschinen am Beispiel des Two-Drive-Transmission.
Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge. München, Deutschland (26.-27. November 2013)
Conference or Workshop Item

Knopik, Thomas (2013)
Steigerung des Wirkungsgrads und der Ausnutzung von Norm-Asynchronmotoren mit Kurzschlusskäfig.
TU Darmstadt
Ph.D. Thesis, Primary publication

Knopik, T. ; Binder, Andreas ; Lehr, Marcel (2013)
Auslotung maximal erreichbarer Wirkungsgrade von vierpoligen Käfigläufer-Normasynchronmotoren im Leistungsbereich von 15 kW.
Int. ETG-Kongress 2013. Berlin, Deutschland (5.-6.11. 2013)
Conference or Workshop Item

König, R. ; An, Jeongki ; Binder, Andreas ; Rinderknecht, Stephan (2013)
Effizienzsteigerung durch optimale Abstimmung von Getriebe und E-Maschine am Beispiel des Two-Drive-Transmission.
Tagung „Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge“. München (26-27.11.2013)
Conference or Workshop Item

Knopik, T. ; Binder, Andreas (2011)
Prediction of the sound power levels of squirrel cage induction machines in different operation points taking into account mechanical boundary conditions for modal analysis.
Proc. of the European Conference on Power Electronics (EPE2011). Birmingham, UK (30.8.-1.9.2011)
Conference or Workshop Item

Knopik, T. ; Binder, Andreas (2011)
Investigations on a combined star-polygon poly-phase winding for an induction machine to reduce parasitic harmonic effects.
Proc. of the 7th Int. Conf. on Energy Efficiency in Motor Drive Systems (EEMODS). Alexandria, USA (12.-14.9.2011)
Conference or Workshop Item

Knopik, T. ; Binder, Andreas (2011)
Einsatz einer mehrphasigen Wicklung in Stern-Polygon-Mischschaltung für Kurzschlussläufer-Asynchronmotoren zur Steigerung der Energieeffizienz.
Tagungsband der Konf. „Elektrisch-mechanisch-hydraulische Antriebssysteme. Nürtingen (13.-14.9.2011)
Conference or Workshop Item

Knopik, T. ; Binder, Andreas (2011)
Measurement proofed analytical and numerical models for calculation of the teeth flux pulsations and harmonic torques of skewed squirrel cage standard induction machines.
IEEE Energy Conversion Congress and Exposition (ECCE 2011). Phoenix, Arizona (17.-22.9.2011)
Conference or Workshop Item

Knopik, T. ; Binder, A. ; Güllich, P. (2007)
Rotor angle detection via shaft iron remanence for the blancing process of small rotors.
Conference or Workshop Item

Körner, Olaf ; Binder, Andreas (2003)
Feasibility of a group drive with two permanent magnet synchronous traction motors for commuter trains.
Conference or Workshop Item

Klohr, Markus ; Binder, Andreas (2002)
Design of carbon fiber bandages for high speed permanent magnet rotors.
Conference or Workshop Item

Koch, Thomas ; Binder, Andreas (2002)
Permanent magnet machines with fractional slot winding for electric traction.
Conference or Workshop Item

Körner, Olaf ; Binder, Andreas ; Breuer, W. (2001)
High-performance locomotives: what drive for which speed ?
Conference or Workshop Item

Koch, Thomas ; Binder, A. (2001)
Energy saving with high speed trains propelled by direct permanent magnet synchronous drive.
Conference or Workshop Item

Koch, Thomas ; Binder, A. (2001)
Permanent magnet synchronous direct drive for high speed trains.
Conference or Workshop Item

Klohr, Markus ; Hinkelmann, C. ; Binder, Andreas (2001)
State space control of a high speed rotor on active magnetic bearings.
Conference or Workshop Item

Koch, Th. ; Binder, Andreas (2001)
Permanent Magnet Gearless Traction Drive for German High Speed Train ICE 3.
Korea-Germany Joint Symposium on Advanced Power Electronics. (Oct.2001)
Conference or Workshop Item

Klohr, Markus ; Binder, Andreas ; Eichhorn, J. (1999)
Bemessung und Simulation eines magnetgelagerten Permanentmagnetantriebs (MAGPERM) 40 kW, 40000 min-1.
Conference or Workshop Item

L

Li, Xing ; Dietz, Daniel ; An, Jeongki ; Erd, Nicolas ; Gemeinder, Yves ; Binder, Andreas (2022)
Design, Manufacture and Testing of a Magnetically Suspended 0.5 kWh-Flywheel Energy Storage System Using Standard Industrial Components for Cost-Effectiveness.
In: IEEE Transactions on Industry Applications, 58 (5)
doi: 10.1109/TIA.2022.3187393
Article

Li, Xing ; Mittelstedt, Christian ; Binder, Andreas (2022)
A review of critical issues in the design of lightweight flywheel rotors with composite materials.
In: e & i Elektrotechnik und Informationstechnik, 139 (2)
doi: 10.1007/s00502-022-01005-4
Article

Li, Xing ; Erd, Nicolas ; Messager, Gael ; Gemeinder, Yves ; Dietz, Daniel ; Binder, Andreas ; An, Jeongki (2021)
Discussion of Field Weakening Operation of a High-Speed PMSM for Flywheel Application.
8. Fachtagung VDE Antriebssysteme - Elektromechanische Antriebssysteme 2021. virtual Conference (09.-10.11.2021)
Conference or Workshop Item

Li, Xing ; An, Jeongki ; Erd, Nicolas ; Dietz, Daniel ; Gemeinder, Yves ; Binder, Andreas (2020)
Design and Manufacture of a High-speed Rotor in a Flywheel Demonstrator.
23rd International Conference on Electrical Machines and Systems. Hamamatsu, Japan (24.-27.11.2020)
doi: 10.23919/ICEMS50442.2020.9290905
Conference or Workshop Item

Lehr, Marcel (2020)
Auslegung und Bewertung elektrischer Maschinen mit Permanentmagneten im Stator für hohe Drehmomentdichten.
Technische Universität Darmstadt
doi: 10.25534/tuprints-00011751
Ph.D. Thesis, Primary publication

Li, Xing (2019)
Evaluation and Design of a Flywheel Energy Storage System.
Technische Universität
doi: 10.25534/tuprints-00009461
Ph.D. Thesis, Primary publication

Lehr, Marcel ; Binder, Andreas (2019)
Comparison of Different Synchronous Machines with Stator-Side Permanent Magnets for Industrial Drive Application.
9th Int. Conf. on Power Electronics, Machines and Drives. Liverpool, UK (17. - 19.4.2018)
Conference or Workshop Item

Lehr, Marcel ; Binder, Andreas (2018)
Auslegung und Vermessung einer permanentmagneterregten Flux-Switching-Machine als Industrieantrieb (Design and measurements of a permanent magnet Flux-switching-Machine for industrial applications).
More Drive Symp.. Wien (Österreich) (25.-26.01.2017)
Conference or Workshop Item

Li, Xing ; Erd, Nicolas ; Binder, Andreas (2018)
Design and Calculation of a 130 kW High-Speed Permanent Magnet Synchronous Machine in Flywheel Energy Storage Systems for Urban Application.
Proc. of the Int. Conf. Clean Electrical Power (IEEE-ICCEP). Santa Margherita Ligure (Italy) (27.-29.06.2017)
Conference or Workshop Item

Li, Xing ; Erd, Nicolas ; Binder, Andreas (2018)
Design of a High-Speed Flywheel Energy Storage Demonstrator.
Konf. „Antriebssysteme 2017 – Elektrik, Mechanik, Fluidtechnik in der Anwendung“. Karlsruhe (Deutschland) (22.11.2017)
Conference or Workshop Item

Lehr, Marcel ; Dietz, Daniel ; Binder, Andreas (2018)
Electromagnetic design of a permanent magnet Flux-Switching-Machine as a direct-driven 3 MW wind power generator.
Int. Conf. on Industrial Technology (ICIT 2018). Lyon (France) (20.-22.02.2018)
Conference or Workshop Item

Lehr, Marcel ; Binder, Andreas ; Ohl, E. (2017)
Design and Construction of a permanent magnet excited Flux-Switching-Machine.
6th Electric Drives Production Conference and Exhibition. Nürnberg Germany (30.11.-1.12.2016)
Conference or Workshop Item

Lehr, Marcel ; Woog, Daniel ; Binder, Andreas (2017)
Design, construction and measurements of a permanent magnet axial flux machine.
Proceedings of the International Conference on Electrical Machines (ICEM). Lausanne, Switzerland (04.-07.09.2016)
Conference or Workshop Item

Lehr, Marcel ; Binder, Andreas (2017)
Design and measurements of a permanent magnet Flux-switching-Machine for industrial applications.
In: e&i, (134)
Article

Li, Xing ; Erd, Nicolas ; Binder, Andreas (2016)
Evaluation of Flywheel Energy Storage Systems for Residential Photovoltaic Installations.
Proceedings of the Symposium on Power Electronics and Electrical Drives (SPEEDAM). Capri, Italy (22.-24.06.2016)
Conference or Workshop Item

Lehr, Marcel ; Woog, D. ; Binder, Andreas (2016)
Design and measurements of a prototype axial flux machine.
Proc. Powersys UG. Aix-en-Provence, France (9.-10.06.2016)
Conference or Workshop Item

Lehr, Marcel ; Binder, Andreas (2015)
Auslegung einer permanentmagneterregten Flux-Switching-Maschine als Industrieanbtrieb.
VDI/VDE Tagung Antriebssysteme. Aachen, Germany (11.-12.11.2015)
Conference or Workshop Item

Lehr, Marcel ; Neusüs, Sascha ; Binder, Andreas (2015)
Design and parametric modelling of a synchronous reluctance machine.
JMAG Users Conference. Frankfurt/Main, Germany (27.-28.05.2015)
Conference or Workshop Item

Lehr, Marcel ; Reis, Kersten ; Binder, Andreas (2015)
Comparison of axial flux and radial flux machines for the use in wheel hub drives.
In: e&i, 132 (1)
Article

Lehr, Marcel ; Reis, Kersten ; Binder, Andreas (2014)
Comparison of axial-flux and radial-flux machines for use in wheel-hub drives.
JMAG Users Conf.; 24.9.2014. Frankfurt/Main, Germany (24.9.2014)
Conference or Workshop Item

Lu, Tong ; Binder, Andreas (2002)
Analytical and experimental analysis of losses in inverter-fed permanent magnet high-speed machines with surface-mounted magnets.
Conference or Workshop Item

Lu, Tong ; Binder, Andreas (2002)
Losses in inverter-fed permanent magnet high-speed machines.
Conference or Workshop Item

Lu, Tong ; Binder, A. (2001)
Experimental investigation of the additional losses in permanent magnet high-speed machines under inverter operation.
Conference or Workshop Item

Lu, Tong ; Binder, A. ; Pfeiffer, R. (2000)
Rotor losses in permanent magnet high-speed machines.
Conference or Workshop Item

Lu, Tong ; Binder, Andreas ; Pfeiffer, R. (2000)
Wirkungsgradverbesserungen bei Hochdrehzahlantrieben.
Conference or Workshop Item

M

Möller, Alexander ; Binder, Andreas (2022)
Survey of Third Harmonic Voltage Injection in Star-Connected Five-Phase Windings for Induction and Permanent Magnet Synchronous Machines.
International Symposium on Power Electronics, Electrical Drives, Automation and Motion. Sorrento, Italy (22.-24.06.2022)
doi: 10.1109/SPEEDAM53979.2022.9842285
Conference or Workshop Item

Möller, Alexander ; Binder, Andreas (2021)
Loss minimum operation of a five-phase induction motor using third harmonic injection.
23rd European Conference on Power Electronics and Applications. virtual Conference (06.-10.09.2021)
doi: 10.23919/EPE21ECCEEurope50061.2021.9570499
Conference or Workshop Item

Möller, Alexander ; Binder, Andreas (2021)
Loss minimal operation of a five-phase induction motor using third harmonic injection.
23rd European Conference on Power Electronics and Applications. Ghent, Belgium (06.-10.09.2021)
doi: 10.23919/EPE21ECCEEurope50061.2021.9570499
Conference or Workshop Item

Messager, Gael (2019)
Self-bearing permanent magnet synchronous machine configurations and control for high-speed applications.
Technische Universität
Ph.D. Thesis, Primary publication

Messager, Gael ; Binder, Andreas (2018)
Derivation of forces and force interferences in a Double Conical High-Speed Bearingless Permanent magnet Synchronous Motor (CD-ROM).
IEEE IEMDC 17. Miami (USA) (21.-04.05.2017)
Conference or Workshop Item

Messager, Gael ; Binder, Andreas (2017)
"Six-Axis Rotor Magnetic Suspension Principle for Permanent Magnet Synchronous Motor with Control of the Positive, Negative and Zero-Sequence Current Components".
Proceedings on Advances in Magnetics (AIM). Bormio, Italy (14.-16.03.2016)
Conference or Workshop Item

Messager, Gael ; Binder, Andreas (2017)
Observer based Pole Placement Control for a Double Conical High-Speed Bearingless Permanent Magnet Synchronous Motor.
17th Europ. Conf. On Power Electronics and Applications (EPE 2016). Karlsruhe, Germany (04.-07.09.2016)
Conference or Workshop Item

Munteanu, G. ; Binder, Andreas ; Schneider, T. ; Funieru, Bogdan (2015)
No-load tests of a 40 kW High-Speed Bearingless Permanent Magnet Synchronous Motor.
20th Int. Symp. On Power Electronics, Ele. Drives, Automation and Motion SPEEDAM 2010. Pisa, Italy (14.-16. June 2010)
Conference or Workshop Item

Messager, Gael ; Mink, F. ; Becker, T. ; Wang, J. ; Binder, Andreas (2015)
Control Interference of Electrical Machines with Double-Star Winding Systems Driven by Independent Current Controllers.
17th European Conference on Power Electronics and Applications (EPE 15 ECCE-Europe). Geneva (8.-10.9.2015)
Conference or Workshop Item

Messager, Gael ; Binder, Andreas (2015)
Evaluation of a Dual Half-Pitched Three-Phase Bearingless High-Speed Permanent Magnet Synchronous Motor Prototype.
10. GMM/ETG-Fachtagung Innovative Klein- und Mikroantriebstechnik (IKMT). Köln (14.-15.9.2015)
Conference or Workshop Item

Mouratidis, Panagiotis (2014)
Design and Implementation of Modern Controls for Drive and Suspension of a High Speed Double Conical Bearingless Motor on a Real-Time System.
TU Darmstadt
Master Thesis, Primary publication

Magdun, O. ; Binder, Andreas (2014)
High-Frequency Induction Machine Modeling for Common Mode Current and Bearing Voltage Calculation.
In: IEEE Transaction on Industry Applications, 50 (3)
Article

Messager, Gael ; Binder, Andreas (2014)
Comparison of conventional and modified winding for high speed bearingless permanent magnet synchronous motor applications.
Proc. Of the 14th Int. Conf. on Optimisation of Electrical and Electronic Equipment (OPTIM). Brasov, Romania (22.-24.5.2014)
Conference or Workshop Item

Messager, Gael ; Gemeinder, Yves ; Binder, Andreas (2014)
Synthetic test-bench for measurement of bearing-currents in inverter fed drives.
Proc. EPE-ECCE 2014. Lappeenranta, Finland (26.-29.8.2014)
Conference or Workshop Item

Magdun, O. ; Blatt, S. ; Binder, Andreas (2013)
Calculation of Stator Winding Parameters to Predict the Voltage Distributions in Inverter Fed AC Machines.
9th IEEE Int. Symp. On Diagnostics for Electric Machines, Power Electronics and Drives (IEEE-SDEMPED). Valencia, Spain (30 Aug. 2013)
Conference or Workshop Item

Magdun, Oliver Narcis (2013)
Calculation of high-frequency current distributions in inverter-fed electrical machines.
TU Darmstadt
Ph.D. Thesis

Magdun, O. ; Binder, Andreas (2013)
Rotor Impedance of the High-Frequency Circulating Bearing Current Path in Inverter-Fed AC Machines.
IEEE Energy Conversion Congress and Exposition (IEEE-ECCE 2013). Denver, Colorado, USA (15-19.9.2013)
Conference or Workshop Item

Mink, F. ; Binder, Andreas ; Beineke, S. ; Lutz, J. (2013)
Regelung von PM-Synchronmaschinen unter Berücksichtigung von Sättigungseffekten.
Proc. Fachkonferenz Elektrische Automatisierung SPS/IPC/Drives. Nürnberg (26.-28. Nov. 2013)
Conference or Workshop Item

Munteanu, G. ; Binder, Andreas (2012)
Bearingless PM Motor Levitation Systems.
Proc. of the Int. Conf. ICEMS 2012. Sapporo, Japan (22.-24.10.2012)
Conference or Workshop Item

Mink, Fabian ; Kubasiak, Nicolai ; Ritter, Bastian ; Binder, Andreas (2012)
Parametric model and identification of PMSM considering the influence of magnetic saturation.
Proceedings of the 13th IEEE International Conference on Optimization of Electrical and Electronic Equipment (OPTIM) 2012.
Conference or Workshop Item

Mirzaei, M. ; Binder, Andreas ; Funieru, Bogdan ; Susic, M. (2012)
Analytical Calculations of Induced Eddy Currents Losses in the Magnets of Surface Mounted PM Machines with Consideration of Circumferential and Axial Segmentation Effects.
In: IEEE Trans. on Magnetics 48, 12
Article

Munteanu, G. ; Binder, Andreas ; Dewenter, S. (2012)
Five-Axis Magnetic Suspension with Two Conical Air Gap Bearingless PM Synchronous Half-Motors.
SPEEDAM 2012. Sorrento, Italy (20.-22.6.2012)
Conference or Workshop Item

Magdun, O. ; Binder, Andreas (2012)
An iron Core Impedance Model for Calculating High Frequency Common Mode Currents and Shaft Voltages in Inverter-Fed AC Machines.
SPEEDAM 2012. Sorrento, Italy (20.-22.6.2012)
Conference or Workshop Item

Magdun, O. ; Binder, Andreas (2012)
The High-Frequency Induction Machine Parameters and Their Influence on the Common Mode Stator Ground Current.
ICEM 2012. Marseille, France (2-4.9.2012)
Conference or Workshop Item

Munteanu, G. ; Binder, Andreas ; Schneider, T. (2011)
Development and Test of High-Speed Bearingless PM Synchronous Machines.
In: e&i, 128
Article

Mirzaei, M. ; Funieru, Bogdan ; Binder, Andreas (2011)
Analysis of contact resistance effect between magnet segments on eddy current losses.
Proc. of the 8th Int. Conf. on Computation in Electromagnetics CEM 2011. Wroclaw, Poland (11-14.4.2011)
Conference or Workshop Item

Mink, F. ; Binder, Andreas (2011)
Parametric Model of PMSM Considering the Influence of Magnetic Saturation.
Korea-Germany Joint Symposium on Power Electronics. TU München (24-29 Aug. 2011)
Conference or Workshop Item

Magdun, O. ; Gemeinder, Yves ; Binder, Andreas ; Reis, Kersten (2011)
Calculation of Bearing and Common-Mode Voltage for Prediction of Bearing Failures Caused by EDM Currents.
8th IEEE Int. Symp. On Diagnostics for Electric Machines, Power Electronics and Drives (IEEE-SDEMPED). Bologna, Italy (5-8 Sept. 2011)
Conference or Workshop Item

Munteanu, G. ; Binder, Andreas ; Schneider, T. (2011)
Losses Measurement of a 40 kW High-Speed Bearingless PM Synchronous Motor.
IEEE Energy Conversion Congress and Exposition (ECCE 2011). Phoenix, Arizona, USA (17-22.9.2011)
Conference or Workshop Item

Magdun, O. (2010)
Representation of Iron Core and Dielectric Losses for Calculation of Common Mode Stator Ground Currents in Inverter-Fed AC Machines.
OPTIM 2010. Brasov, Rumänien (May 20-22 2010)
Conference or Workshop Item

Mirzaei, M. ; Binder, Andreas ; Deak, C. (2010)
3D Analysis of Circumferential and Axial Segmentation Effect on Permanent Magnet Eddy Current Losses in Permanent Magnet Synchronous Machines with Concentrated Windings.
ICEM 2010. Rome, Italy (6.-8. September 2010)
Conference or Workshop Item

Magdun, O. ; Binder, Andreas ; Gemeinder, Yves (2010)
Investigation of Influence of Bearing Load and Bearing Temperature on EDM Bearing Currents.
, IEEE-ECCE 2010. Atlanta, Georgia (12.-16. Sept. 2010)
Conference or Workshop Item

Magdun, O. ; Gemeinder, Yves ; Binder, Andreas (2010)
Prevention of Harmful EDM Currents in Inverter-Fed AC Machines by Use of Electrostatic Shields in the Stator Winding Overhang.
Proc. of the Int. Conf. IECON 2010. , Glendale, USA (Nov. 7-10 2010)
Conference or Workshop Item

Magdun, O. ; Binder, A. ; Purcarea, C. ; Rocks, A. (2009)
High-Frequency Induction Machine Models for Calculation and Prediction of Common Mode Stator Ground Currents in Electric Drive Systems.
13th European Conference on Power Electronics and Applications, EPE 2009, Barcelona, Spanien, 8. – 10. September 2009.
Conference or Workshop Item

Magdun, O. ; Binder, A. ; Purcarea, C. ; Rocks, A. (2009)
Modeling of Asymmetrical Cables for an Accurate Calculation of Common Mode Ground Currents.
IEEE Energy Conversion Congress and Exposition 2009, 20. – 24. September 2009, San José, California.
Conference or Workshop Item

Magdun, O. ; Binder, A. ; Rocks, A. ; Henze, O. (2007)
Prediction of common mode ground current in motors of inverter-based drive systems.
Conference or Workshop Item

Mütze, A. ; Binder, A. (2007)
Calculation of circulating bearing currents in machines of inverter-based drive systems.
In: IEEE Transactions on Industrial Electronics, 54
Article

Mütze, A. ; Binder, A. (2007)
Calculation of motor capacitances for prediction of the voltage across the bearings in machines of inverter-based drive systems.
In: IEEE Transactions on Industrial Electronics, 43
Article

Mütze, A. ; Binder, A. (2007)
Techniques for measurement of parameters related to inverter-induced bearing currents.
In: IEEE Transactions on Industry Applications, 43
Article

Mütze, A. ; Binder, A. (2007)
Practical rules for assessment of inverter-induced bearing currents in inverter-fed AC-motors up to 500 kW.
In: IEEE Transactions on Industry Electronics Magazine, 54
Article

Muetze, A. ; Binder, A. ; Vogel, H. ; Hering, J. (2006)
What can bearings bear? - How much current is too much?
In: IEEE IAS Magazine, 12
Article

Muetze, A. ; Binder, A. (2006)
DonÁt Lose Your Bearings - Mitigation techniques for bearing currents in inverter-supplied drive systems.
In: IEEE IAS Magazine, 12
Article

Mütze, Annette ; Binder, Andreas (2005)
Systematic approach to bearing current evaluation in variable speed drive systems.
In: European Transactions on Electrical Power, 15
Article

Mütze, Annette ; Binder, Andreas (2005)
Generation of high-frequency common mode currents in machines of inverter-based drive systems.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2005)
Techniques for measurement of parameters related to inverter-induced bearing currents.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2005)
Calculation of the influence of insulated bearings and insulated inner bearing seats on circulating bearing currents in machines of inverter-based drive systems.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2005)
Systematic approach to bearing current evaluation in variable speed drive systems.
In: ETEP, 15
Article

Meinert, Michael ; Binder, Andreas (2004)
Active damping of inrush and DC-currents for high temperature superconducting (HTS)-transformers on rail vehicles.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2004)
Practical rules for assessment of inverter-induced bearing currents in inverter-fed AC-motors up to 500 kW.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2004)
Calculation of circulating bearing currents in machines of inverter-based drive systems.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas ; Vogel, H. ; Hering, J. (2004)
Experimental evaluation of the endangerment of ball bearings due to inverter-induced bearing currents.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2003)
Experimental evaluation of mitigation techniques for bearing currents in inverter-supplied drive-systems : investigations on induction motors up to 500 kW.
Conference or Workshop Item

Meinert, Michael ; Binder, Andreas ; Oomen, M. P. ; Leghissa, M. (2003)
Operational influences of an IGBT-converter on the losses of the 1-MVA-high temperature supercondcting (HTS)-transformer for rail vehicles.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2003)
Influence of cable and filter configuration on bearing currents in inverter-fed induction motors 11 kW to 500 kW.
Conference or Workshop Item

Meinert, Michael ; Binder, Andreas (2003)
Inrush-modeling of a single-phase 1-MVA-HTS (high temperature superconducting)-transformer for rail vehicles.
Conference or Workshop Item

Mütze, A. ; Binder, Andreas (2003)
Experimental evaluation of mitigation techniques for bearing currents in inverter-supplied drive systems – Investigations on induction motors up to 560 kW.
Proc. of the Int. Conf. IEEE-IEMDC. Madison, Wisconsin (1.-4.6.2003)
Conference or Workshop Item

Mütze, A. ; Binder, Andreas (2003)
Influence of cable and filter configurations on bearing currents in inverter-fed induction motors 11 kW to 500 kW.
Int. Power Conversion & Intelligent Motion (PCIM) Conf.. Nürnberg (20-22 May 2003)
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2002)
Systematical approach to bearing current evaluation in speed drive systems.
Conference or Workshop Item

Mütze, Annette ; Binder, Andreas (2002)
Influence of motor size on the nature of bearing currents : investigations at 11 kW and 110 kW inverter-fed induction motors.
Conference or Workshop Item

N

Neusüs, Sascha ; Binder, Andreas (2020)
Post rotor-fault operation of a Ferrite Magnet assisted Synchronous Reluctance.
2020 International Conference on Electrical Machines. virtual Conference (23.-26.08.2020)
doi: 10.1109/ICEM49940.2020.9271011
Conference or Workshop Item

Neusüs, Sascha ; Binder, Andreas (2020)
Numerical evaluation of permanent magnet-assisted synchronous reluctance rotor topologies using a simplified magnetostatic model.
In: International Journal of Numerical Modelling Electronic Networks Devices and Fields, 33 (5)
doi: 10.1002/jnm.2574
Article

Neusüs, Sascha ; Erd, Nicolas ; Binder, Andreas ; Traxler-Samek, Georg (2020)
Transient Simulation of Single-Phase Synchronous Generators from Manufacturer Data.
2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). virtual Conference (24.-26.06.2020)
doi: 10.1109/SPEEDAM48782.2020.9161833
Conference or Workshop Item

Neusüs, Sascha ; Binder, Andreas (2019)
Operation Strategy and Efficiency Map Calculation of a Synchronous Reluctance Motor.
Proceedings of the International Conference on Electrical Machines. Alexandroupoli, Griechenland (03. - 06.09.2018)
Conference or Workshop Item

Neusüs, Sascha ; Binder, Andreas (2018)
Numerical evaluation of permanent Magnet assisted synchronous reluctance rotor topologies using a simplified magnetostatic model.
11th International Symposium on Electric and Magnetic Fields. Darmstadt (10.-12.04.2018)
Conference or Workshop Item

Neusüs, Sascha ; Binder, Andreas (2018)
Shaping and dimensioning of the flux barriers in synchronous reluctance machines.
OPTIM 2017. Brasov (Romania) (25.-27.05.2017)
Conference or Workshop Item

Neusüs, Sascha ; Binder, Andreas (2018)
Design studies of synchronous reluctance machines.
JMAG Users Conf. 2017. Paris (France) (08.11.2017)
Conference or Workshop Item

Neusüs, Sascha ; Binder, Andreas (2018)
Design of a synchronous reluctance rotor for the stator of an 11 kW induction machine.
In: e & i Elektrotechnik und Informationstechnik, 135
doi: 10.1007/s00502-018-0603-x
Article

Neudorfer, H. ; Wicker, N. ; Binder, A. (2006)
Rechnerische Untersuchung von zwei Energiemanagements für Hybridfahrzeuge.
In: Automobiltechnische Zeitschrift : ATZ, 108
Article

Neudorfer, H. ; Binder, A. ; Wicker, N. (2006)
Analyse von unterschiedlichen Fahrzyklen für den Einsatz von Elektrofahrzeugen.
In: Elektrotechnik und Informationstechnik : e & i (0932-383X), 123
Article

Neudorfer, Harald ; Binder, Andreas (2004)
Energieeinsparungspotential bei Hybridfahrzeugen durch den Einsatz von innovativen elektrischen Antriebssystemen.
Conference or Workshop Item

O

Obe, E. S. ; Binder, Andreas (2015)
Direct-phase-variable model of a synchronous reluctance motor including all slot and winding harmonics.
In: Energy Conversion and Management, 52
Article

P

Purcarea, Calin (2011)
High-frequency parasitic effects in electric drives with long cables.
Institut für Stromrichtertechnik und Antriebsregelung
Ph.D. Thesis, Primary publication

Purcarea, C. ; Mutschler, P. ; Magdun, O. ; Binder, A. ; Rocks, A. (2009)
Time Domain Simulation Models for Inverter-Cable-Motor System in Electrical Drives.
13th European Conference on Power Electronics and Applications, EPE 2009, Barcelona, Spanien, 8. – 10. September 2009.
Conference or Workshop Item

Petrovic, L. ; Binder, A. ; Deak, C. ; Irimie, D. ; Reicher, K. ; Purcarea, C. (2007)
Numerical methods for calculation of eddy current losses in permanent magnets of synchronous machines.
Conference or Workshop Item

R

Recker, Cornelia ; Weicker, Martin (2022)
Einfluss der elektrischen Schmierfettleitfähigkeit auf die Ausbildung von Lagerströmen bei umrichterbetriebenen 1,5kW-Asynchronmotoren.
5. VDI-Fachkonferenz Schadensmechanismen an Lagern. Aachen, Germany (28.-29.06.2022)
Conference or Workshop Item

Rinderknecht, Stephan ; Binder, Andreas (2018)
Doppel-E-Antrieb mit Range-Extender (DE-REX).
In: Z! Das Zukunftsmagazin, 3
Article

Reis, Kersten ; Binder, Andreas (2016)
Comparison of direct drive and high speed drive concepts for the use in wheelhub-drives.
International Conference Power Electronics Machines and Drives (PEMD). Glasgow UK (19.-21.04.2016)
Conference or Workshop Item

Radnai, B. ; Gemeinder, Yves ; Kiekbusch, T. ; Sauer, B. ; Binder, Andreas (2015)
Schädlicher Stromdurchgang - Untersuchung des Schädigungsmechanismus und der zulässigen Lagerstrombelastung von Wälzlagern in E-Motoren und Generatoren verursacht durch parasitäre hochfrequente Lagerströme.
In: FVA-Heft 1127, Forschungsvorhaben Nr. 650 I, Forschungsvereinigung Antriebstechnik e.V., Frankfurt /Main
Article

Reichert, K. ; Binder, Andreas (2014)
Elektrische Maschinen und Antriebe - Auswahl, Auslegung und Dimensionierung.
Book

Reis, Kersten ; Lehr, Marcel ; Binder, Andreas (2014)
Comparison of axial-flux and radial-flux machines for use in wheel-hub drives.
Tagung „Advanced E-Motor Technology 2014. Frankfurt/Main (25-26.02.2014)
Conference or Workshop Item

Reis, Kersten ; Binder, Andreas (2014)
Development of a permanent magnet outer rotor direct drive for use in wheel-hub drives.
Proceedings of the International Conference on Electrical Machines (ICEM). Berlin (3.-5. Sept. 2014)
Conference or Workshop Item

Reis, Kersten ; Binder, Andreas (2014)
Konzeptvergleich: Direktmotoren vs. Getriebe-Motoren als Radnabenantriebe.
13. Technischer Tag der VEM-Gruppe. Wernigerode (30.9.-1.10.2014)
Conference or Workshop Item

Reis, Kersten ; Binder, Andreas (2013)
Radnabenantriebe als Antriebskonzept für Elektrofahrzeuge.
Tagung „Elektrische Antriebstechnologie für Hybrid- und Elektrofahrzeuge“. München (26-27.11.2013)
Conference or Workshop Item

Rastogi, Armin (2010)
Berechnung von doppeltgespeisten Asynchronmaschinen und permanent-erregten Synchronmaschinen als Windgeneratoren und Industrieantriebe.
TU Darmstadt
Ph.D. Thesis

Rastogi, A. ; Binder, A. (2006)
Analytical versus Numerical magnet circuit calculation of PM machines at high load saturation.
Conference or Workshop Item

Rentschler, Alexander ; Binder, Andreas (2005)
Dynamic simulation of torque ripple, caused by magnetic air gap asymmetries in induction machines.
Conference or Workshop Item

Rastogi, Armin ; Binder, Andreas (2004)
Analytical approach in calculating double-fed wind generators.
Conference or Workshop Item

Rastogi, Armin ; Binder, Andreas (2004)
Entwurfsmethodik für doppeltgespeiste Asynchron-Windgeneratoren im Leistungsbereich bis 5 MW.
Conference or Workshop Item

Rastogi, Armin ; Binder, Andreas (2003)
Doubly fed induction generators in wind power plants.
Conference or Workshop Item

Rentschler, Alexander ; Binder, Andreas (2003)
Dynamic simulation of wound rotor induction machines in an object oriented environment using dymola/modelica.
Conference or Workshop Item

S

Safdarzadeh, Omid ; Weicker, Martin ; Binder, Andreas (2022)
Transient Thermal Analysis of the Contact in Bearings Exposed to Electrical Currents.
4th International FVA-Conference. Würzburg, Germany (05.-06.07.2022)
Conference or Workshop Item

Safdarzadeh, Omid ; Weicker, Martin ; Binder, Andreas (2021)
Steady-state Thermal Analysis of the Contact in Bearings Exposed to Electrical Currents.
47th Annual Conference of the IEEE Industrial Electronics Society. Toronto, Canada (13.-16.10.2021)
doi: 10.1109/IECON48115.2021.9589748
Conference or Workshop Item

Safdarzadeh, Omid ; Weicker, Martin ; Binder, Andreas (2021)
Measuring of electrical currents, voltage and resistance of an axial bearing.
International Joint Conference OPTIM-ACEMP. virtual Conference (02.-04.09.2021)
doi: 10.1109/OPTIM-ACEMP50812.2021.9590048
Conference or Workshop Item

Safdarzadeh, Omid ; Weicker, Martin ; Binder, Andreas (2021)
Investigation of electrical contact in axial and radial bearings in dry and mixed lubrication states applied AC voltages.
8. Fachtagung VDE Antriebssysteme - Elektromechanische Antriebssysteme 2021. virtual Conference (09.-10.11.2021)
Conference or Workshop Item

Safdarzadeh, Omid ; Weicker, Martin ; Binder, Andreas ; Graf, Simon Johannes ; Sauer, Bernd (2020)
Modelling of the electric bearing contact under parasitic bearing current in inverter-fed electrical motors in e-mobile applications.
12th International Conference on electric vehicle drives and e-mobility (Expert Forum E-Motiv). virtual Conference (15.-17.09.2020)
Conference or Workshop Item

Schuster, Martin ; Binder, Andreas (2019)
Comparison of an 1.1 kW-induction machine and a 1.5 kW-PMSM regarding common mode bearing currents.
Proceedings of the Symposion on Power Electronics and Electrical Drives. Amalfi, Italien (20. - 22.06.2018)
Conference or Workshop Item

Schuster, Martin ; Binder, Andreas (2018)
Bearing currents of a 2.4 kW-PM synchronous motor fan drive with integrated frequency inverter.
Proc. EPE-ECCE EUROPE 2017. Warsaw (Poland) (11.-14.09.2017)
Conference or Workshop Item

Schuster, Martin ; Masendorf, Daniel ; Binder, Andreas (2017)
Two PMSMs and the influence of their geometry to common-mode bearing currents.
Proceedings of the International Conference on Electrical Machines (ICEM). Lausanne, Switzerland (04.-07.09.2016)
Conference or Workshop Item

Schuster, Martin ; Binder, Andreas (2015)
Comparison of different inverter-fed AC motor types regarding common mode bearing currents.
7th IEEE Energy Conversion Congress and Exposition (ECCE2015). Montreal (20.-24.9.2015)
Conference or Workshop Item

Strauch, M. ; Klumpp, N. ; Binder, Andreas (2012)
Parameteridentifikation und Modellierung von Lithium-Eisen-Phosphat-Akkumulatoren für die Verwendung in Modellen elektrischer Fahrzeuge.
Elektromobilitätsausstellung (EMA. Nürnberg (21.-22.9.2012)
Conference or Workshop Item

Strauch, M. ; Dewenter, S. ; Binder, Andreas ; Nam, K. H. (2012)
Calculation of the electromagnetic characteristics of an electrically excited synchronous motor for an EV.
IEEE-VPPC 2012. Seoul, Korea (Oct. 9-12)
Conference or Workshop Item

Schneider, T. ; Binder, Andreas (2010)
Entwurf und experimentelle Untersuchung eines lagerlosen permanenterregten Synchron-Hochdrehzahlmotors für 60000/min.
8. ETG/GMM-Fachtagung „Innovative Klein- und Mikroantriebstechnik“. Würzburg (22.-23. Sept. 2010)
Conference or Workshop Item

Schneider, T. ; Binder, A. (2007)
Lagerlose Motoren als Hochdrehzahlantriebe.
In: Thema forschung
Article

Schlemmer, E. ; Ramsauer, F. ; Cui, X. ; Binder, A. (2007)
HYDROMATRIX and StraflomatrixTM, electric energy from low head hydro potential.
Conference or Workshop Item

Schneider, T. ; Binder, A. (2007)
Design and evalualtion of a 60000 rpm permanent magnet bearingless high speed motor.
Conference or Workshop Item

Schneider, T. ; Binder, A. ; Chen, L. (2006)
Design procedure of bearingless high-speed permanent magnet motors.
In: Electromagnetic Fields in Mechatronics, Electrical and Electronic Engineering, A. Krawczyk et al. (Eds.), IOS Press, 2006, S. 473-478
Book Section

Schneider, Tobias ; Binder, Andreas ; Chen, L. (2005)
Design procedure of bearingless high-speed permanent magnet motors.
Conference or Workshop Item

Schneider, Tobias ; Koch, T. ; Binder, Armin (2004)
Comparative analysis of limited field weakening capability of surface mounted permanent magnet machines.
Conference or Workshop Item

Schneider, Tobias ; Binder, Andreas (2003)
Evaluation of new surface mounted permanent magnet synchronous machine with finite element calculations.
Conference or Workshop Item

Schätzer, Christoph ; Binder, A. (2000)
Design optimization of a high-speed permanent magnet machine with the VEKOPT algorithm.
Conference or Workshop Item

Schätzer, Christoph ; Binder, A. ; Müller, W. (1999)
Vector optimization of a high-speed drive using two-dimensional numerical field calculation.
Conference or Workshop Item

Schätzer, Christoph ; Binder, A. ; Müller, W. (1999)
A new approach for solving vector optimization problems.
Conference or Workshop Item

T

Traxler-Samek, Georg ; Bartosch, Maximilian ; Binder, Andreas (2020)
Combination of Numerical and Analytical Methods for Hydrogenerator Calculation.
2020 International Conference on Electrical Machines. virtual Conference (23.-26.08.2020)
doi: 10.1109/ICEM49940.2020.9270973
Conference or Workshop Item

Takahashi, A. ; Kikuchi, S. ; Mikami, H. ; Binder, Andreas (2015)
Asynchronous Torque of Line-Starting Permanent-Magnet Synchronous Motors.
In: IEEE Transaction on Energy Conversion, 30 (2)
Article

Takahashi, A. ; Kikuchi, S. ; Mikami, H. ; Ide, K. ; Binder, Andreas (2013)
Reluctance Torque Utility of Line-Starting Permanent Magnet Motors.
In: IEEE Transaction on Energy Conversion, 28 (4)
Article

Takahashi, A. ; Kikuchi, S. ; Mikami, H. ; Ide, K. ; Binder, Andreas (2012)
d-q- Space Vector Analysis for Line-Starting Permanent Magnet Synchronous Motors.
ICEM 2012. Marseille (2-4.9.2012)
Conference or Workshop Item

Takahashi, Akeshi (2010)
Dynamic and steady-state characteristics of lin- starting permanent magnet motors.
Book

Takahashi, A. ; Kikuchi, S. ; Miyata, K. ; Wakui, S. ; Mikami, H. ; Ide, K. ; Binder, Andreas (2010)
Dynamic and Steady-State Performance of Line-Starting Permanent Magnet Motors.
ICEM 2010. Rome, Italy (6.-8. Sept. 2010)
Conference or Workshop Item

W

Weicker, Martin ; Safdarzadeh, Omid ; Binder, Andreas (2022)
Influence of static rotor unbalance on inverter-induced bearing currents.
24th European Conference on Power Electronics and Applications. Hanover, Germany (05.-09.09.2022)
Conference or Workshop Item

Weicker, Martin ; Binder, Andreas (2022)
Discharge bearing currents in inverter-fed induction machines with rated power of 90 W.
13. GMM/ETG-Fachtagung Innovative Kleinantriebs-und Kleinmotorentechnik. Linz, Austria (14.-15.09.2022)
Conference or Workshop Item

Weicker, Martin ; Binder, Andreas (2022)
Characteristic parameters for electrical bearing damage.
International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM'22). Sorrento, Italy (22.-24.06.2022)
doi: 10.1109/SPEEDAM53979.2022.9842046
Conference or Workshop Item

Weicker, Martin ; Binder, Andreas (2021)
Review on system parameters in variable speed AC-induction motor drives with parasitic electric bearing currents.
23rd European Conference on Power Electronics and Applications. Ghent, Belgium (06.-10.09.2021)
doi: 10.23919/EPE21ECCEEurope50061.2021.9570692
Conference or Workshop Item

Weicker, Martin ; Bello, Guilherme ; Kampen, Dennis ; Binder, Andreas (2020)
Influence of system parameters in variable speed AC-induction motor drives on parasitic electric bearing currents.
22nd European Conference on Power Electronics and Applications. virtual Conference (07.-11.09.2020)
doi: 10.23919/EPE20ECCEEurope43536.2020.9215613
Conference or Workshop Item

Weicker, Martin ; Kampen, Dennis (2020)
Effect of passive inverter output motor filters in drive systems.
22nd European Conference on Power Electronics and Applications. virtual Conference (07.-11.09.2020)
doi: 10.23919/EPE20ECCEEurope43536.2020.9215639
Conference or Workshop Item

Wang, Jinou ; Binder, Andreas (2016)
Position estimation for self-sensing magnetic bearings based on the current slope due to the switching power amplifier.
In: EPE Journal, 26 (4)
Article

Wang, Jinou ; Binder, Andreas (2015)
Magnetlager und Verfahren zum kontaktlosen Halten eines Körpers.
Norm, patent, standard

Wang, J. ; Binder, Andreas (2014)
Position Estimation for Self-Sensing Magnetic Bearings Based on Double Detection of Current Slopes.
Proc. of the 14th Int. Symp. on Magnetic Bearings (ISMB 2014). Linz, Austria (11.-14.8.2014)
Conference or Workshop Item

Wang, J. ; Binder, Andreas (2013)
Self-sensing magnetic bearings using multiple sampling of currents alone.
Proc. European Conference on Power Electronics (EPE). Lille, France (3.-5.9.2013)
Conference or Workshop Item

Wang, J. ; Binder, Andreas (2013)
Current slope calculation in FPGA for sensorless control technique and associated slope based predictive precise current control.
United Symp. SLED 2013 & PRECEDE 2013. Munich, Germany (17.-19.10.2013)
Conference or Workshop Item

Werner, U. ; Binder, A. (2006)
Rotor dynamic analysis of asynchronous machines including the Finite-Element-Method for engineering low vibration motors.
Conference or Workshop Item

Werner, U. ; Binder, A. (2006)
Rotordynamische Auslegung von überkritisch betriebenen Asynchronmaschinen unter Berücksichtigung der Fundamentsteifigkeit.
Conference or Workshop Item

Werner, Ulrich ; Binder, Andreas (2005)
Dynamic analysis due to eccentricity in asynchronous machines.
Conference or Workshop Item

Werle, Thomas ; Hofmann, Martina ; Binder, Andreas (2002)
Booster concepts for increase of tractive effort.
Conference or Workshop Item

Werle, Thomas ; Binder, Andreas (2001)
DC-fed railbooster for locomotives.
Conference or Workshop Item

Werle, Thomas ; Hofmann, Martina ; Binder, Andreas (2001)
Asynchronous linear machine with massive iron as secondary.
Conference or Workshop Item

Werle, Thomas ; Binder, Andreas (2001)
DC linear actuator with massive iron as secondary.
Conference or Workshop Item

Werle, Thomas ; Binder, Andreas (2000)
Asynchronous linear machine as booster for railway vehicles.
Conference or Workshop Item