A

Apostolidi, Eftychia ; Strauss, Alfred ; Sattler, Fabian ; Sousa, Helder
eds.: Casas, Joan ; Frangopol, Dan M. ; Turmo, Jose (2022)
Performance prediction & modelling including advanced methods for existing concrete structures in the framework of the fib TG 3.3 Bulletin.
11th International Conference on Bridge Maintenance, Safety and Management. Barcelona, Spain (11-15.07.2022)
doi: 10.1201/9781003322641-303
Conference or Workshop Item

Apostolidi, Eftychia ; Dritsos, Stephanos ; Giarlelis, Christos ; Kyriakides, Nicholas ; Lampropoulos, Andreas ; Lima, Luis ; Mateos, Alejandro ; Moseley, Jon ; Repapis, Constantinos
eds.: Julio, Eduardo ; Cavaco, Eduardo (2022)
Steel Jacketing.
In: Guide for Strengthening of Concrete Structures
doi: 10.35789/fib.BULL.0103.Ch03
Book Section

Apostolidi, Eftychia ; Dritsos, Stephanos ; Giarlelis, Christos ; Kyriakides, Nicholas ; Lampropoulos, Andreas ; Moseley, Jon ; Repapis, Constantinos
eds.: Julio, Eduardo ; Cavaco, Eduardo (2022)
Frame encasement (shear walls).
In: Guide for Strengthening of Concrete Structures
doi: 10.35789/fib.BULL.0103.Ch10
Book Section

Aktas, Muharem ; Kiziltoprak, Nihat ; Avci, Halil Ibrahim ; Schneider, Jens (2022)
Bearing-strength of paper laminates in single bolt connections.
In: Construction and Building Materials, 323
doi: 10.1016/j.conbuildmat.2022.126462
Article

Apostolidi, Eftychia ; Šomodíková, Martina ; Strauss, Alfred ; Novák, Drahomir ; Pukl, Radomir ; Lehký, David
eds.: Pellegrino, Carlo ; Faleschini, Flora ; Zanini, Mariano Angelo ; Matos, José C. ; Casas, Joan R. ; Strauss, Alfred (2022)
Modelling of Nonlinear and Uncertain Behavior of Concrete Bridges.
EUROSTRUCT 2021. Padova, Italy (August 29 - September 1, 2021)
doi: 10.1007/978-3-030-91877-4_29
Conference or Workshop Item

Apostolidi, Eftychia ; Dritsos, Stephanos ; Giarlelis, Christos ; Jara, José ; Sutcu, Fatih ; Takeuchi, Toru ; White, Joe
ed.: Lampropoulos, Andreas (2021)
Seismic Isolation and Response Control.
doi: 10.2749/sed019
Book

Akerboom, Robert ; Seel, Matthias (2020)
Additive manufacturing with glass for facade applications.
In: Innovative Materials, (2)
Article

Apostolidi, Eftychia (2019)
Innovative Concrete Composite Planar Systems Reinforced with Perforated Steel Sheets.
Universität für Bodenkultur Wien, Department für Bautechnik und Naturgefahren, Institut für konstruktiven Ingenieurbau (IKI)
Ph.D. Thesis

Alter, Christian (2019)
Nicht-lokale Versagensformulierung zur Simulation des spannungsratenabhängigen Bruchverhaltens von Verbundsicherheitsglas und ihre Anwendung beim Kopfaufprall auf Windschutzscheiben.
TU Darmstadt
Ph.D. Thesis

Apostolidi, Eftychia
ed.: Dritsos, Stephanos (2019)
Masonry Buldings' Seismic Failures.
In: Characteristic Seismic Failures of Buildings
Book Section

Apostolidi, Eftychia ; Šomodíková, Martina ; Strauss, Alfred ; Lehký, David ; Novák, Drahomir (2019)
Statistical survey of existing reinforced and pre-stressed bridge types for the AT-CZ region within the “ATCZ190 SAFEBRIDGE” Project.
20th Congress of IABSE, New York City 2019: The Evolving Metropolis. New York, USA (04.-06.09.2019)
Conference or Workshop Item

Akbarzadeh, Masoud ; Bolhassani, Mohammad ; Nejur, Andrei ; Yost, Joseph Robert ; Byrnes, Cory ; Schneider, Jens ; Knaack, Ulrich ; Borg Costanzi, Christopher (2019)
The Design of an Ultra-Transparent Funicular Glass Structure.
Structures Congress 2019. Orlando, Florida (April 24–27, 2019)
doi: 10.1061/9780784482247.037
Conference or Workshop Item

Auer, Thomas ; Knaack, Ulrich ; Schneider, Jens (2017)
Powerskin Conference Proceedings.
Munich, Germany (19.01.2017)
Conference or Workshop Item

Alter, Christian ; Kolling, Stefan ; Schneider, Jens (2017)
An enhanced non–local failure criterion for laminated glass under low velocity impact.
In: International Journal of Impact Engineering, 109
Article

Apostolidi, Eftychia ; Bergmeister, Konrad ; Strauss, Alfred ; Winkler, Patrick ; Kremitzer, Peter ; Rauch, Christian ; Schembera, Bernhard
eds.: Balázs, György L. ; Koris, Kálmán ; Kopecskó, Katalin (2017)
Innovative Perforated Steel Sheet Reinforcement: Corbel Approach.
The 12th Central European Congress on Concrete Engineering. Tokaj, Hungary (31.08.2017 - 01.09.2017)
Conference or Workshop Item

Apostolidi, Eftychia ; Berbeister, Konrad ; Hilber, Raimund ; Strauss, Alfred ; Zeman, Oliver ; Zimmermann, Thomas ; Kremnitzer, Peter ; Rauch, Christian ; Schembra, Bernhard
eds.: Furuta, Hitoshi ; Frangopol, D. M. ; Akiyama, Mitsuyoshi (2015)
Integrative monitoring measurements of perforated steel sheets.
4th International Symposium on Life-Cycle Civil Engineering, IALCCE 2014. Tokyo, Japan (16.-19.11.2014)
Conference or Workshop Item

Apostolidi, Eftychia ; Bergmeister, Konrad ; Strauss, Alfred ; Dritsos, Stephanos (2014)
Experimental investigation on fibre reinforced elastomeric bearings.
37th IABSE Symposium on Engineering for Progress, Nature and People. Madrid, Spain (03.-05.09.2014)
Conference or Workshop Item

Apostolidi, Eftychia ; Karela, Nikolitsa ; Dritsos, Stephanos (2013)
Upgrading reinforced concrete structures by adding new concrete.
(06.-08.05.2013)
Conference or Workshop Item

Apostolidi, Eftychia ; Karela, Nikolitsa ; Dritsos, Stephanos (2012)
Bond between Old-to-New Concrete Interfaces.
(17.-20.06.2012)
Conference or Workshop Item

Auer, Thomas ; Knaack, Ulrich ; Techen, Holger (2008)
Imagine - materials, structure and climate.
In: Xia intelligente Architektur, 63 (01-03)
Article

B

Bischof, Rafael ; Sprenger, Marius ; Riedel, Henrik ; Bumann, Matthias ; Walczok, Waldemar ; Drass, Michael ; Kraus, Michael A. (2023)
Temp-AI-Estimator: Interior Temperature Prediction using Domain-Informed Deep Learning.
In: Energy and Buildings
doi: 10.1016/j.enbuild.2023.113425
Article

Bewersdorff, David ; da Silva, Carina ; Knaack, Ulrich (2021)
Effects of Heat Transfer Systems on Comfort and Energy Demand.
9th PowerSKIN Conference. München (09.04.2021)
Conference or Workshop Item

Bach, Rebecca ; Wolf, Alexander ; Wilfinger, Martin ; Kiziltoprak, Nihat ; Knaack, Ulrich (2021)
Full performance paper house.
In: Journal of Facade Design and Engineering, 9 (1)
doi: 10.7480/JFDE.2021.1.5533
Article

Bishara, Nadja ; Pernigotto, Giovanni ; Prada, Alessandro ; Baratieri, Marco ; Gasparella, Andrea (2021)
Experimental determination of the building envelope’s dynamic thermal characteristics in consideration of hygrothermal modelling – Assessment of methods and sources of uncertainty.
In: Energy & Buildings, 236
doi: 10.1016/j.enbuild.2021.110798
Article

Bremm, Sophia ; Rosendahl, Philipp Laurens ; Becker, Wilfried (2021)
Application of a reduced basis method for an efficient treatment of structural mechanics problems.
In: Proceedings in Applied Mathematics and Mechanics (PAMM), 20 (1)
doi: 10.1002/pamm.202000012
Article

Bewersdorff, David (2021)
HYGGiency - Raumhygiene und Behaglichkeit durch energetische Sanierung im Quartier.
TU Darmstadt
Ph.D. Thesis

Bach, Rebecca ; Götzinger, Robert ; Kiziltoprak, Nihat ; Pfeiffer, Marcus ; Schabel, Samuel ; Schneider, Jens ; Knaack, Ulrich ; Kolling, Stefan (2020)
Warum … und nicht … ? Fragen, Gedanken und Diskussionen zum Bauen mit Papier.
In: Wochenblatt für Papierfabrikation, 2020 (9)
Article

Bewersdorff, David ; Silva, Carina da (2019)
Grüne Fassaden vs. Überhitzung - Begrünte Fassaden als Alternative zu klassischen Fassadensystemen.
In: Glaswelt, 71 (E3276)
Article

Borg Costanzi, Christopher ; Ahmed, Z. Y. ; Schipper, H. R. ; Bos, F. P. ; Knaack, Ulrich ; Wolfs, R. J. M. (2018)
3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure.
In: Automation in Construction, 94
doi: 10.1016/j.autcon.2018.06.013
Article

Bewersdorff, David ; Alexandrakis, Elena ; Haake, Ines ; Hickert, Sascha ; Knaack, Ulrich ; Koenders, Eddie ; Mankel, Christoph (2018)
Bauphysik der Fassade: Prinzipien der Konstruktion.
Book

Bewersdorff, David ; Alexandrakis, Elena ; Haake, Ines ; Hickert, Sascha ; Knaack, Ulrich ; Koenders, Eddie ; Mankel, Christoph
eds.: Knaack, Ulrich ; Koenders, Eddie (2018)
Building Physics of the Envelope: Principles of Construction.
Book

Böke, Jens ; Knaack, Ulrich ; Hemmerling, Marco (2018)
State-of-the-art of intelligent building envelopes in the context of intelligent technical systems.
In: Intelligent Buildings International
doi: 10.1080/17508975.2018.1447437
Article

Borg Costanzi, Christopher ; De Witte, Dennis ; Akerboom, Robert (2018)
New Material systems for 3D printing.
In: RuMoer, 69 (2018)
Article

Bishara, Nadja (2018)
Measurement of dynamic properties of building envelope materials and components - methods, tools, instruments and application.
Free University of Bozen, Italy
Ph.D. Thesis

Bishara, Nadja ; Gasparella, Andrea (2018)
The effect of ambient moisture conditions on heat flux time shift and decrement factor of multi-layered walls.
7th IPBC. Syracuse, NY, USA (September, 23 - 26, 2018)
doi: 10.14305/ibpc.2018.ms-8.06
Conference or Workshop Item

Borg Costanzi, Christopher ; Knaack, Ulrich ; Koenders, E. A. B. ; Schneider, Jens ; Lange, Jörg (2017)
AM4AE: Dokumentierung der Additiven Fertigung im Bauwesen.
2. Tagung des DVM-Arbeitskreises „Additiv gefertigte Bauteile und Strukturen“. Berlin (9. - 10. November 2017)
Conference or Workshop Item

Boxheimer, Kaja (2017)
Cyclic Fatigue of Glass Panels.
Glass Performance Days 2007. Tampere, Finland
Conference or Workshop Item

Borg Costanzi, Christopher ; Ahmed, Z. Y. ; Schipper, H. R. ; Bos, F. P. ; Knaack, Ulrich ; Wolfs, R. J. M.
eds.: Bögle, Annette ; Grohmann, Manfred (2017)
3D Printing Concrete on temporary surfaces: The design and fabrication of a concrete shell structure.
Proceedings of the IASS Annual Symposium 2017. Hamburg, Germany (25.-28.09.2017)
Conference or Workshop Item

Bishara, Nadja ; Gasparella, Andrea (2017)
CFD modelling of forced convection at a building component surface and coupling to dynamic HAM simulation – assessment and evaluation of methods and accuracy.
In: Energy Procedia, 132
doi: 10.1016/j.egypro.2017.09.673
Article

Becker, Matthias ; Traiser, Birgit ; Pullamthara, Jiny Jose ; Schill, Florian ; Schneider, Jens ; Firus, Andrei (2016)
Messung und Identifikation dynamischer Strukturparameter mittels terrestrischer Mikrowelleninterferometrie.
Messen im Bauwesen 2016: Erhalt der Bauwerke unserer Verkehrs-Infrastruktur. Berlin (08.11.2016)
Conference or Workshop Item

Bewersdorff, David ; Müller, N. ; Pfnür, A. ; Simsch, G. (2016)
Entwicklung Systemischer Instrumente zur Nachhaltigkeitsbewertung energetischer Gebäudesanierungen.
1. Tag der Interdisziplinarität. Fif TU Darmstadt (28.1.2016)
Conference or Workshop Item

Bishara, Nadja ; Prada, Alessandro ; Pernigotto, Giovanni ; Baratieri, Marco ; Gasparella, Andrea (2016)
Analysis of the measurements reliability in dynamic test of the opaque envelope.
4th International High Performance Buildings Conference at Purdue. West Lafayette, Indiana (July 11 - 14, 2016)
Conference or Workshop Item

Bishara, Nadja ; Schulz, Tino ; Gecks, Jens ; Plagge, Rudolf ; Wehsener, Jörg (2016)
Thermal optimization and performance analysis of an innovative wooden radiant heating system made for room temperature control—Laboratory and numerical investigation of prototypes.
In: Energy and Buildings, 138
doi: 10.1016/j.enbuild.2016.12.091
Article

Bishara, Nadja ; Plagge, Rudolf (2015)
Experimental investigation of a new solid wood panel for room temperature control - Analysis of the cooling performance.
CISBAT 2015. Lausanne Switzerland (September 9-11th, 2015)
doi: 10.5075/epfl-cisbat2015-101-106
Conference or Workshop Item

Bishara, Nadja ; Vogelsang, Stefan ; Plagge, Rudolf (2015)
Numerical simulation of the hygrothermal behavior of a new solid wood panel for room temperature control – Calibration of the heating curve.
In: Energy Procedia
doi: 10.1016/j.egypro.2015.11.136
Article

Bewersdorff, David ; Simsch, Gerd (2014)
Energetische Sanierung im Wohnungsbu - Effiziente Behaglichkeit.
In: Darmstadt Concrete
Book Section

Bewersdorff, David ; Simsch, Gerd (2014)
Energieeffizienz und Behaglichkeit von Bestandsbauten (1920-2000) im Kontext normativer und gesetzlicher Regelungen.
In: Darmstadt Concrete
Book Section

Bishara, Nadja ; Plagge, Rudolf (2014)
Development of a solid wood panel for heating and cooling of floor, wall and ceiling constructions.
10th Nordic Symposium on Building Physics. Lund, Schweden (15 - 19 June 2014)
Conference or Workshop Item

Borg Costanzi, Christopher (2012)
Assessing durability of PFA-Blended concrete.
University of Malta
Bachelor Thesis

Bachmann, Gregor (2010)
Entwicklung von Grund- und Böschungsbruch : Experimente und Numerik.
TU Darmstadt
Ph.D. Thesis

Badarnah, L. ; Nachman Farchi, Y. ; Knaack, Ulrich
eds.: Carpi, A. ; Brebbia, C. A. (2010)
Solutions from nature for building envelope thermoregulation.
In: Design and nature V - Comparing design in nature with science and engineering, Edition: 12.
Book Section

Badnarnah, L. ; Kadri, U. ; Knaack, Ulrich (2008)
A bio-inspired ventilating envelope optimized by air-flow-simulations.
The world sustainable building conference 2008, Melbourne, Australia. Melbourne (21.11.2008-25.11.2008)
Conference or Workshop Item

Badarnah, L. ; Knaack, Ulrich (2008)
Organizational features in leaves for application in shading systems for building envelopes.
Design and nature IV : comparing design in nature with sciences and engineering. Algarve Portugal (24/06/08 → 26/06/08)
Conference or Workshop Item

Bekkering, H. C. ; Schaick, J. van ; Spek, S. C. van der ; Vollebregt, A. G. ; Bruyns, G. J. B. ; Read, S. A. ; Dorst, M. J. van ; Schütze, T. ; Nes, A. van ; Steenbergen, C. M. ; Berg, R. G. P. van den ; Sepulveda, D. ; Fuchs, A. ; Hauptmann, D. ; Heijer, A. C. den ; Knaack, Ulrich ; Lelieveld, C. M. J. L. ; Dobbelsteen, A. A. J. F. van den ; Klein, Tillmann ; Jurgenhake, B. ; Teerds, P. J. (2008)
Virtueel boek: The Architecture Annual 2006-2007.
Book

Badermah, L. ; Knaack, Ulrich ; Ebbert, Timo (2007)
Bionic breathing skin for buildings.
Portugal SB'07 Conference, sustainable constructing, materials and practices - Lisbon. Lissabon (12 Sep 2007 → 14 Sep 2007)
Conference or Workshop Item

Bilow, Marcel ; Klein, Tillmann ; Knaack, Ulrich (2007)
Deflateable structures transferred into façade constructions.
III International conference on textile composited and inflatable structures - Barcelona. (17 Sep 2007 → 19 Sep 2007)
Conference or Workshop Item

C

Chen, Xing ; Lin, Binbin ; Schuster, Miriam ; Chen, Suwen ; Xu, Bai-Xiang ; Schneider, Jens (2023)
Effect of moisture on the delamination properties of fractured PVB-laminated glass: A joint experimental and numerical study.
In: Composite Structures, 322
doi: 10.1016/j.compstruct.2023.117381
Article

Chen, Da ; Rezaei, Shahed ; Rosendahl, Philipp Laurens ; Xu, Bai-Xiang ; Schneider, Jens (2022)
Multiscale modelling of functionally graded porous beams: Buckling and vibration analyses.
In: Engineering Structures, 266
doi: 10.1016/j.engstruct.2022.114568
Article

Chen, Xing ; Schuster, Miriam ; Schneider, Jens (2021)
On the pummel test and pummel-value evaluation of polyvinyl butyral laminated safety glass.
In: Composite Structures, 280
doi: 10.1016/j.compstruct.2021.114878
Article

Chen, Xing ; Rosendahl, Philipp Laurens ; Chen, Suwen ; Schneider, Jens (2021)
On the delamination of polyvinyl butyral laminated glass: Identification of fracture properties from numerical modelling.
In: Construction and Building Materials, 306
doi: 10.1016/j.conbuildmat.2021.124827
Article

Conci, Mira (2019)
E3 – a parametric model to evaluate trade-offs between the energetic, economic, and ecological lifecycle performance of building projects.
TU Darmstadt
Ph.D. Thesis

Conci, Mira ; Konstantinou, T. ; Dobbelsteen, A. A. J. F. van den ; Schneider, Jens (2019)
Trade-off between the economic and environmental impact of different decarbonisation strategies for residential buildings.
In: Building and Environment, 155
doi: 10.1016/j.buildenv.2019.03.051
Article

Castillo Ruano, Pablo ; Apostolidi, Eftychia ; Strauss, Alfred (2018)
Reliability based optimization of fiber reinforced elastomeric bearings.
In: Beton- und Stahlbetonbau, 113 (S2)
doi: 10.1002/best.201800058
Article

Cruz, P. J. S. ; Knaack, Ulrich ; Figueiredo, B. ; De Witte, Dennis (2017)
Ceramic 3D printing: The future of brick architecture.
IASS 2017 Hamburg Symposium: Digital Technologies for Spatial Structures. Hamburg, Germany (25-28 September 2017)
Conference or Workshop Item

Conci, Mira ; Schneider, Jens (2017)
A District Approach to Building Renovation for the Integral Energy Redevelopment of Existing Residential Areas.
In: Sustainability, 9 (5)
Article, Secondary publication

Castillo Ruano, Pablo ; Apostolidi, Eftychia ; Strauss, Alfred
eds.: Bakker, J. ; Frangopol, D. M. ; Breugel, Klaas van (2016)
Numerical investigations on circular fiber reinforced elastomeric bearings.
Fifth International Symposium on Life-Cycle Civil Engineering (IALCCE 2016). Delft, The Netherlands (16.-19.10.2016)
doi: 10.1201/9781315375175
Conference or Workshop Item

Conci, Mira (2016)
Towards a sustainable future.
In: RuMoer, 62
Article

Conci, Mira ; Schneider, Jens (2016)
SWIVT as a case-study on energy management platforms supporting design, planning and operation of smart districts.
9th International Conference on Improving Energy Efficiency in Commercial Buildings and Smart Communities. Frankfurt am Main (16.-18.03.2016)
Conference or Workshop Item

Castillo Ruano, Pablo ; Pürgstaller, Andreas ; Apostolidi, Eftychia ; Bergmeister, Konrad ; Strauss, Alfred (2015)
Innovative fiber reinforced elastomeric isolation devices.
IABSE Conference, Geneva 2015. Geneva, Switzerland (23.-25.09.2015)
Conference or Workshop Item

D

Dix, Steffen ; Thiele, Kerstin ; Efferz, Lena ; Schuler, Christian ; Schneider, Jens ; Kolling, Stefan
eds.: Hvejsel, M. F. ; Cruz, P. J. S. (2022)
Test facilities and concept for the evaluation of optical anisotropy effects in tempered glass.
5th International Conference on Structures and Architecture. Aalborg
doi: 10.1201/9781003023555-131
Conference or Workshop Item

Drass, Michael ; Kraus, Michael Anton ; Riedel, Henrik ; Stelzer, Ingo (2022)
SoundLab AI-Machine learning for sound insulation value predictions of various glass assemblies.
In: Glass Structures & Engineering
doi: 10.1007/s40940-022-00167-z
Article

Drass, Michael ; Berthold, Hagen ; Kraus, Michael ; Müller-Braun, Steffen (2020)
Semantic segmentation with deep learning: detection of cracks at the cut edge of glass.
In: Glass Structures & Engineering
doi: 10.1007/s40940-020-00133-7
Article

Drass, Michael ; Rosendahl, Philipp Laurens ; Kraus, Michael A. (2020)
Coupled distortional-dilatational failure mode concept for silicone adhesives.
In: Mechanics of Materials, 148
doi: 10.1016/j.mechmat.2020.103511
Article

Drass, Michael (2020)
Constitutive modelling and failure prediction for silicone adhesives in façade design.
TU Darmstadt
Ph.D. Thesis

Dillenberger, Felix Ben (2019)
On the anisotropic plastic behaviour of short fibre reinforced thermoplastics and its description by phenomenological material modelling.
TU Darmstadt
Ph.D. Thesis

De Witte, Dennis ; Fehlhaber, Thomas (2019)
3D-Clay Printing - Next generation Brickwork.
In: Ceramic Forum International, 96 (4-5/2019)
Article

De Witte, Dennis (2018)
3D-Druck von Tonkeramik für Freiformfassaden.
In: Fassade, 2018 (5)
Article

Drass, Michael ; Schneider, Jens ; Kolling, Stefan (2018)
Novel volumetric Helmholtz free energy function accounting for isotropic cavitation at finite strains.
In: Materials & Design, 138
doi: 10.1016/j.matdes.2017.10.059
Article

Drass, Michael ; Kolupaev, V. A. ; Rosendahl, Philipp Laurens ; Schneider, Jens ; Becker, Wilfried (2018)
Generalized cavitation criterion for poro-hyperelastic material.
Forschungskolloquium 2018 Grasellenbach. Grasellenbach (13-14 April 2018)
doi: 10.1007/978-3-658-23627-4_6
Conference or Workshop Item

Drass, Michael ; Schneider, Jens ; Kolling, Stefan (2018)
Damage Effects of Adhesives in Modern Glass Façades: A Micro-Mechanically Motivated Volumetric Damage Model for Poro-Hyperelastic Materials.
In: International Journal of Mechanics and Materials in Design, 14 (4)
doi: 10.1007/s10999-017-9392-3
Article

De Witte, Dennis ; Klijn-Chevalerias, M. L. de ; Loonen, R. C. G. M. ; Hensen, J. L. M. ; Knaack, Ulrich ; Zimmermann, Gregor
eds.: Bakker, Siebe ; 4TU.Bouw (2018)
Convective Concrete.
In: Research to reality
Book Section

Drass, Michael ; Rosendahl, Philipp Laurens ; Staudt, Yves (2018)
Material modelling and failure mechanisms of hyperelastic adhesive joints.
Glas im konstruktiven Ingenieurbau 16.
Conference or Workshop Item

Drass, Michael ; Schwind, Gregor ; Schneider, Jens ; Kolling, Stefan (2018)
Adhesive connections in glass structures - part I: experiments and analytics on thin structural silicone.
In: Glass Structures and Engineering, 3 (1)
doi: 10.1007/s40940-017-0046-5
Article

Drass, Michael ; Schwind, Gregor ; Schneider, Jens ; Kolling, Stefan (2017)
Novel volumetric Helmholtz free energy function accounting for isotropic cavitation at finite strains.
In: Materials & Design, 138
doi: 10.1016/j.matdes.2017.10.059
Article

Drass, Michael ; Schwind, Gregor ; Schneider, Jens ; Kolling, Stefan (2017)
Adhesive connections in glass structures - part II: material parameter identification on thin structural silicone.
In: Glass Structures & Engineering, 3 (1)
doi: 10.1007/s40940-017-0048-3
Article

Drass, Michael ; Schuster, Miriam ; Schneider, Jens (2017)
Comparison of unconventional testing methods for mechanical characterization of polymeric materials in modern glass structures.
39th IABSE Symposium – Engineering the Future. Vancouver Canada (21.-23.09.2017)
Conference or Workshop Item

De Witte, Dennis ; Klijn-Chevalerias, M. L. de ; Loonen, R. C. G. M. ; Hensen, J. L. M. ; Knaack, Ulrich ; Zimmermann, G. (2017)
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design & Engineering, 5 (1)
doi: 10.7480/jfde.2017.1.1430
Article

De Witte, Dennis ; Klijn-Chevalerias, M. L. de (2017)
Convective Concrete: Additive Manufacturing to facilitate activation of thermal mass.
PowerSkin Conference - Munich, Germany. München (19.01.2017)
Conference or Workshop Item

De Witte, Dennis ; Klijn-Chevalerias, M. L. de ; Loonen, R. C. G. M. ; Hensen, J. L. M. ; Knaack, Ulrich ; Zimmermann, G. (2017)
Convective Concrete - Additive Manufacturing to facilitate activation of thermal mass.
In: Journal of Facade Design and Engineering,, 5 (1)
Article

Drass, Michael ; Schneider, Jens ; Kelleter, Christian ; Sobek, Werner ; Haase, Walter (2016)
Aspekte experimenteller und numerischer Untersuchungen von Klemmhalterungen im Glasbau.
In: Stahlbau, 85 (S1 (Glasbau 2016))
doi: 10.1002/stab.201690157
Article

De Witte, Dennis ; Knaack, Ulrich (2016)
„RAM“ Material Xperience.
3 TU.Bouw center of excellence for the built environment. Rotterdam (29.01.2016)
Conference or Workshop Item

Drass, Michael ; Schneider, Jens (2016)
Constitutive Modeling of Transparent Structural Silicone Adhesive–TSSA.
14. Darmstädter Kunststofftag. Hochschule Darmstadt (h _ da) Institut für Kunststofftechnik Darmstadt (ikd) Darmstadt (24.06.2016)
Conference or Workshop Item

Drass, Michael ; Schneider, Jens (2016)
On the mechanical behavior of transparent structural silicone adhesive – TSSA.
Sixth International Conference on Structural Engineering, Mechanics and Computation – SEMC 2016. Capetown, South Africa (2016-09-05 - 2016-09-07)
doi: 10.1201/9781315641645-74
Conference or Workshop Item

Drass, Michael ; Schneider, Jens (2016)
Constitutive Modeling of Transparent Structural Silicone Adhesive – TSS.
14. Darmstädter Kunststofftag. Darmstadt
Conference or Workshop Item

De Witte, Dennis ; Knaack, Ulrich ; Mohsen, Alamir ; Tessmann, Oliver ; Bilow, Marcel
eds.: Knaack, Ulrich ; Klein, Tillmann ; Bilow, Marcel (2016)
Rapids 2.0.
Book

Drass, Michael ; Schneider, Jens (2016)
Constitutive Modeling of Transparent Structural Silicone Adhesive – TSSA.
14. Darmstädter Kunststofftag. Darmstadt (24. Juni 2016)
Conference or Workshop Item

De Witte, Dennis (2015)
Concrete in an AM process: Freeform concrete processing.
TU Delft
Master Thesis

Dritsos, Stephanos ; Apostolidi, Eftychia ; Karela, Nikolitsa
eds.: Strauss, Alfred ; Frangopol, Dan ; Bergmeister, Konrad (2013)
Strategies and Methods to Increase the Life Cycle of RC Buildings in Seismic Prone Areas.
(03.-06.10.2012)
Conference or Workshop Item

Drass, Michael ; Schober, Kay-Uwe (2012)
Grenzflächenaktivierung eingeklebter Stahlstangen.
2. Trierer Holzbaugespräch. Trier, Germany (11.05.2012)
Conference or Workshop Item

Deußer, Stephan (1997)
Erhöhung der Dichtheit und Dauerhaftigkeit von Stahlbetonkonstruktionen durch Textilien.
In: Technische Universität Darmstadt : Institut für Statik : Jahresbericht 1997, 12
Article

E

Ensslen, Frank ; Schwind, Gregor ; Schneider, Jens ; Beinert, Andreas ; Mahfoudi, Achor ; Lorenz, Elke ; Herzberg, Wiebke ; Michael, Elstner ; Polakova, Michaela ; Schäfer, Steffen ; Erban, Christof ; Röhner, Joachim ; Sommer, Robert (2022)
Joint Research Project (in progress): Draft Standard for Determining the Thermal Stress of Glass and Glass-Glass PV Modules (BIPV) in the Construction Industry.
Challenging Glass Conference 8. Ghent University – Ghent – Belgium (23.-24.06.2022)
doi: 10.47982/cgc.8.433
Conference or Workshop Item

Ensslen, Frank ; Müller-Braun, Steffen (2017)
Kantenfestigkeit von Floatglas in Abhängigkeit von wesentlichen Schneidprozessparametern.
In: Glasbau, 2017
Article

Ensslen, Frank ; Müller-Braun, Steffen (2017)
Kantenfestigkeit von Floatglas in Abhängigkeit von wesentlichen Schneidprozessparametern.
In: Glasbau 2017
Book Section

Ensslen, F. ; Schneider, Jens ; Schula, S. (2010)
Produktion, Eigenschaften und Tragverhalten von thermisch gebogenen Floatgläsern für das Bauwesen – Erstprüfung und werkseigene Produktionskontrolle im Rahmen des Zulassungsverfahrens.
In: Stahlbau Spezial 2010 – Konstruktiver Glasbau
Article

Ebbert, Timo ; Knaack, Ulrich (2008)
Strategies for the refurbishment of office facades - a case study.
World sustainable building conference 2008. Melbourne (21 Sep 2008 → 25 Sep 2008)
Conference or Workshop Item

Ebbert, T. ; Knaack, Ulrich (2007)
An adaptable facade concept for sustainable office refurbishment.
Proceedings of building stock activation 2007. Tokyo
Conference or Workshop Item

F

Feldmann, Markus ; Laurs, Maximilian ; Belis, Jan ; Buljan, Nebosja ; Criaud, Annie ; Dupont, Eric ; Eliasova, Martina ; Galuppi, Laura ; Hassinen, Paavo ; Kasper, Ruth ; Louter, Christian ; Manara, Giampiero ; Minne, Anne ; Morgan, Tim ; Pisano, Gabriele ; Overend, Mauro ; Royer-Carfagni, Gianni ; Schneider, Jens ; Schwind, Gregor ; Schuler, Christian ; Siebert, Geralt ; Sikynova, Anna (2023)
The new CEN/TS 19100: Design of glass structures.
In: Glass Structures and Engineering, 2023
doi: 10.1007/s40940-023-00219-y
Article

Firus, Andrei (2022)
A contribution to moving force identification in bridge dynamics.
Technische Universität
doi: 10.26083/tuprints-00020293
Ph.D. Thesis, Primary publication, Publisher's Version

Firus, Andrei ; Kemmler, Roman ; Berthold, Hagen ; Lorenzen, Steven ; Schneider, Jens (2022)
A time domain method for reconstruction of pedestrian induced loads on vibrating structures.
In: Mechanical Systems and Signal Processing, 171
doi: 10.1016/j.ymssp.2022.108887
Article

Firus, Andrei ; Kemmler, Roman ; Berthold, Hagen ; Lorenzen, Steven ; Schneider, Jens
eds.: Papadrakakis, Manolis ; Fragiadakis, Michalis ; Papadimitriou, Costas (2020)
A novel method for indirect measurement of groundreaction forces on vibrating structures.
EURODYN 2020 XI International Conference on Structural Dynamics. Athens (23-26 November 2020)
Conference or Workshop Item

Feucht, Thilo ; Lange, Jörg ; Erven, Maren ; Borg Costanzi, Christopher ; Knaack, Ulrich ; Waldschmitt, Benedikt (2020)
Additive manufacturing by means of parametric robot programming.
In: Construction robotics, 4
doi: 10.1007/s41693-020-00033-w
Article

Firus, Andrei ; Berthold, Hagen ; Schneider, Jens ; Seyfarth, André ; Albinger, Max
ed.: Powers, Nigel (2018)
Parameter identification of a biodynamic walking model for human-structure interaction.
9th International Conference on Bridge Maintenance (IABMAS 2018). Melbourne, Australia (9-13 July 2018)
Conference or Workshop Item

Firus, Andrei ; Berthold, Hagen ; Schneider, Jens ; Grunert, Günther (2018)
Untersuchungen zum dynamischen Verhalten einer Eisenbahnbrücke bei Anregung durch den neuen ICE 4.
6. VDI-Fachtagung Baudynamik 2018. Würzburg (17. und 18. April 2018)
Conference or Workshop Item

Firus, Andrei ; Schneider, Jens ; Becker, Matthias ; Grunert, Günther ; Pullamthara, Jiny Jose (2016)
Dynamische Verformungsmessungen an Eisenbahnbrücken mittels Mikrowelleninterferometrie. Teil 1: Messverfahren.
In: Bautechnik, 93 (10)
doi: 10.1002/bate.201600050
Article

Franz, Johannes (2016)
Untersuchungen zur Resttragfähigkeit von gebrochenen Verglasungen : Investigation of the residual load-bearing behaviour of fractured glazing.
TU Darmstadt
Ph.D. Thesis

Firus, Andrei ; Schneider, Jens ; Becker, Matthias ; Pullamthara, Jiny Jose (2016)
Validation of microwave interferometry measurements for applications in railway bridge dynamics.
German-Japanese Bridge Symposium GJBS 2016. Osaka, Japan (30.-31.08.2016)
Conference or Workshop Item

Franz, Johannes ; Schneider, Jens ; Maier, Andreas
eds.: Weller, Bernhard ; Schneider, Jens (2016)
Insulating glazing with integrated functions – case study of the ETA-factory.
In: Engineered Transparency 2016: Glass in Architecture and Structural Engineering
Book Section

Firus, Andrei ; Schneider, Jens ; Francke, Wolfgang ; Kunkel, B. (2016)
TU Darmstadt HUMVIB-Bridge: Investigation of the human-structure interaction on a full-scale experimental pedestrian bridge.
Brasov, Romania (28-29 October 2016)
Conference or Workshop Item

Firus, Andrei ; Kramer, A. ; Werkle, Horst ; Francke, Wolfgang (2015)
Schwingungsantwort einer Decke infolge von vertikalen beidbeinigen Sprüngen in der Sprungkraftdiagnostik.
5. VDI-Fachtagung Baudynamik. Kassel
Conference or Workshop Item

Franz, Johannes ; Schneider, Jens ; Kuntsche, Johannes K. ; Hilcken, Jonas (2014)
Untersuchungen zum Resttragverhalten von Verbundglas: Through-Cracked-Tensile-Test.
In: Glasbau 2014
Book Section

Firus, Andrei ; Werkle, Horst ; Francke, Wolfgang ; Clausner, C. (2014)
Evaluation of footfall-induced vibrations on thier importance in a biomechanics laboratory.
International Scientific Conference CIBv. Brasov, Romania (7.-8.11.2014)
Conference or Workshop Item

Franz, Johannes ; Schneider, Jens ; Kuntsche, Johannes K. ; Hilcken, Jonas (2014)
Untersuchungen zum Resttragverhalten von Verbundglas: Through-Cracked-Tensile Test.
In: Stahlbau, 83 (S1)
Article

Franz, Johannes ; Kuntsche, Johannes K. (2013)
Damit die Folie sicher hält - Neue Prüfmethoden für Glaslaminate.
In: Glaswelt, (12)
Article

G

Gilka-Bötzow, A. ; Folino, P. C. ; Maier, Andreas ; Koenders, E. A. B. ; Caggiano, A. (2021)
Triaxial Failure Behavior of Highly Porous Cementitious Foams Used as Heat Insulation.
In: Processes, 9 (8)
doi: 10.3390/pr9081373
Article

Gerasimova, Ekaterina ; Galyamichev, Alexander ; Schwind, Gregor ; Schneider, Jens (2021)
Deflection of a cladding panel of fully tempered glass in curtain wall system.
In: Magazine of Civil Engineering, 2021 (104 (4))
doi: 10.34910/MCE.104.3
Article

Grammou, N. ; Schneider, Jens
eds.: Bletzinger, K. ; Fisch, R. ; Gebbeken, N. (2014)
Analyse zu Zusammenhängen zwischen Schnee, Wind und Temperatur bei Schnee-Ereignissen für ausgewählte Standorte in Deutschland.
In: Baustatik- Baupraxis 12
Book Section

Garrecht, H. ; Schneider, Jens ; Ott, A. ; Franz, J. ; Heinsdorff, M. (2010)
Steigerung der Tragfähigkeit für das Deutsch-Chinesische Haus der EXPO 2010 durch Optimierung des Bambus-Beton-Verbundes.
In: Bauingenieur, (85)
Article

Gugeler, J. ; Gerber, H. ; Schneider, Jens ; Havemann, K. (2006)
Lehrter Bahnhof Berlin: Die Haupteingangsfassaden.
In: Stahlbau, (6)
Article

H

Hübsch, Jan David ; Rosendahl, Philipp Laurens ; Mittelstedt, Christian (2021)
Blister tests on thin-walled composite structures at different temperatures.
In: International Journal of Adhesion and Adhesives, 110
doi: 10.1016/j.ijadhadh.2021.102907
Article

Hauser, Michael ; Rigler, Matthias ; Apostolidi, Eftychia ; Strauss, Alfred ; Zimmermann, Thomas ; Frangopol, Dan M.
eds.: Yokota, Hiroshi ; Frangopol, Dan (2021)
Improved assessment of concrete bridges.
Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020). Sapporo, Japan (June 28-July 2, 2020)
doi: 10.1201/9780429279119
Conference or Workshop Item

Hübsch, Jan David ; Rosendahl, Philipp Laurens ; Mittelstedt, Christian (2021)
An analytical failure model for pressurized blister tests of thermally loaded composite laminates.
In: Composites Part B: Engineering, 214
doi: 10.1016/j.compositesb.2020.108588
Article

Hickert, Sascha (2020)
Fabrik Formwork : Entwicklung und Bewertung eines textilen Schalungssystems.
TU Darmstadt
Ph.D. Thesis

Hildebrand, L. ; Konstantinou, T. ; Kosanović, S. ; Klein, T. ; Knaack, Ulrich
ed.: TU Delft (2018)
Origin and Development of Environmental Design.
In: Sustainable and resilient building design: approaches, methods and tools
Book Section

Hoces, A.I. Prieto ; Knaack, Ulrich ; Auer, Thomas ; Klein, Tillmann (2017)
Solar façades: Main barriers for widespread façade integration of solar technologies.
PowerSkin Conference - Munich, Germany. München (19.01.2017)
Conference or Workshop Item

Hoces, Alejandro Prieto ; Knaack, Ulrich ; Auer, Thomas ; Klein, Tillmann (2017)
Solar coolfacades: Framework for the integration of solar cooling technologies in the building envelope.
In: Energy, 137
doi: 10.1016/j.energy.2017.04.141
Article

Hoces, Alejandro Prieto ; Knaack, Ulrich ; Auer, Thomas ; Klein, Tillmann (2017)
Solar façades: Main barriers for widespread façade integration of solar technologies.
In: Journal of Facade Design & Engineering, 5 (1)
doi: 10.7480/jfde.2017.1.1398
Article

Hoces, Alejandro Prieto ; Knaack, Ulrich ; Auer, Thomas ; Klein, Tillmann (2016)
Coolfacade: Design driven categorisation of solar cooling technologies for facade integration possibilities.
15th International Conference on Sustainable Energy Technologies – SET 2016 - NUS - National University of Singapore, Singapore. Singapore (19 Jul 2016 → 22 Jul 2016)
Conference or Workshop Item

Hickert, Sascha ; Knaack, Ulrich (2016)
Evaluation of free-form concrete architecture, moulding systems and their technical potentials.
In: Journal of Facade Design and Engineering, 3 (3-4)
doi: 10.7480/jfde.2015.3-4.978
Article

Henriksen, Thomas ; Lo, Stephen ; Knaack, Ulrich (2016)
A new method to advance complex geometry thin-walled glass fibre reinforced concrete elements.
In: Journal of building engineering, 6
doi: 10.1016/j.jobe.2016.04.002
Article

Henriksen, Thomas ; Knaack, Ulrich ; Lo, Stephen (2016)
Innovative Complex Geometry GFRC “Thin-walled concrete panels for future building envelopes.
Facade Tectonics 2016 World Congress. Los Angeles USA (October 10-11, 2016)
Conference or Workshop Item

Henriksen, Thomas ; Lo, Stephen ; Knaack, Ulrich (2016)
The impact of a new mould system as part of a novel manufacturing process for complex geometry thin-walled GFRC.
In: Architectural Engineering and Design Management, 12 (3)
doi: 10.1080/17452007.2016.1159540
Article

Henriksen, T. ; Lo, S. ; Knaack, Ulrich ; Kirkeggard, P. H. (2016)
Developing and testing a novel manufacturing method for complex geometry GFRC panels by fabricating a 10m high, self-supporting hyperbolic shell.
In: COST_2016_45
Article

Henriksen, Thomas ; Lo, Stephen ; Knaack, Ulrich (2015)
An innovative approach to manufacture thin-walled glass fibre reinforced concrete for tomorrow's architectural buildings envelopes with complex geometries.
In: Journal of building engineering, 4
Article

Hilcken, Jonas (2015)
Zyklische Ermüdung von thermisch entspanntem und thermisch vorgespanntem Kalk-Natron-Silikatglas = Cyclic fatigue of annealed and tempered soda-lime glass.
TU Darmstadt
Ph.D. Thesis

Henriksen, T. N. ; Knaack, Ulrich (2015)
Advancing the architectural application of complex geometry GFRC.
In: Papers of the 17th international congress of the GRCA
Book Section

Henriksen, T. N. ; Lo, S. ; Knaack, Ulrich (2015)
An innovative approach to manufacture thin-walled glass fibre reinforced concrete for tomorrow’s architectural buildings envelopes with complex geometries.
In: Journal of Building Engineering, 4
doi: 10.1016/j.jobe.2015.09.006
Article

Henriksen, Thomas ; Knaack, Ulrich ; Lo, Stephen (2015)
“Advancing moulding techniques for the manufacture of thin-walled GFRC for Complex geometry architectural buildings.
In: Elsevier Editorial System ™ for Construction & Building Materials
Article

Henriksen, T. ; Lo, S. ; Knaack, Ulrich (2015)
Advancing moulding techniques for the manufacture of thin-walled GFRC for Complex geometry architectural buildings.
In: Elsevier Editorial System ™ for Construction & Building Materials
Article

Henriksen, T. ; Lo, S. ; Knaack, Ulrich (2015)
Complex Geometry GFRC in Architectural Applications.
In: GRC Conference Dubai
Article

Hilcken, Jonas ; Boxheimer, Kaja (2014)
Ermüdung von Floatglas, TVG und ESG bei zyklischer Belastung.
In: Glaswelt 2014, 67
Article

Hickert, Sascha ; Knaack, Ulrich (2014)
Freigeformte Betonkonstruktionen: Formen, Schalungssysteme und technische Potentiale.
Conference or Workshop Item

Hilcken, J. ; Boxheimer, Kaja ; Schneider, Jens ; Wörner, Johann-Dietrich ; Franz, J. (2014)
Untersuchung der zyklischen Ermüdung von thermisch vorgespanntem Kalk-Natron-Silikatglas.
In: Glasbau 2014
Book Section

Hilcken, Jonas ; Schneider, Jens ; Boxheimer, Kaja (2013)
Dauerschwingfestigkeit von Glas.
2. Darmstädter Ingenieurkongress 2013. Darmstadt
Conference or Workshop Item

Hilcken, J. ; Boxheimer, Kaja ; Schneider, Jens ; Wörner, Johann-Dietrich (2013)
Untersuchungen zum Ermüdungsverhalten von gezielt vorgeschädigtem Floatglas aus Kalk-Natron-Silikatglas bei zyklischer Belastung.
Conference or Workshop Item

Hemmerling, M. ; Knaack, Ulrich ; Schulz, J. U. (2008)
Complexity in digital architectural design.
eCAADe 26 Architecture 'incomputro' Integrating methods and techniques.
Conference or Workshop Item

J

Juaristi, M. ; Monge-Barrio, A. ; Knaack, U. ; Gómez-Acebo, T. (2018)
Smart and multifunctional materials and their possible application in façade systems.
In: Journal of Facade Design and Engineering, 6 (3)
doi: 10.7480/jfde.2018.3.2475
Article

K

Kirschstein, Xenia ; Reber, Joscha ; Zeus, Rouven ; Schuster, Miriam ; Bishara, Nadja (2023)
Modelling of floor heating and cooling in residential districts.
In: Energies, 16 (15)
doi: 10.3390/en16155850
Article

Kohl, Antonia M. ; Clement, Kim-Denise ; Schneider, Jens ; Firus, Andrei ; Lombaert, Geert (2023)
An investigation of dynamic vehicle-bridge interaction effects based on a comprehensive set of trains and bridges.
In: Engineering Structures
doi: 10.1016/j.engstruct.2022.115555
Article

Kohl, Antonia M. ; Clement, Kim-Denise ; Schneider, Jens ; Firus, Andrei ; Lombaert, Geert
ed.: IABSE (2022)
Vehicle-bridge interaction: Influence of the train type on the dynamic response of bridges due to a train crossing.
IABSE Symposium. Prague (25.-27.05.2022)
Conference or Workshop Item

Kohl, Antonia M. ; Vospernig, Michael ; Kwapisz, Maciej ; Grunert, Günther ; Firus, Andrei ; Schneider, Jens (2022)
Neues Hochgeschwindigkeitslastmodell für Eisenbahnbrücken. Teil 2: Auswahl repräsentativer Fahrzeuge.
VDI Wissensforum Baudynamik. Würzburg (27.4.-28.4.2022)
doi: 10.51202/9783181023792-81
Conference or Workshop Item

Kanli, Evgenia (2022)
Experimental Investigations on Joining Techniques for Paper Structures : A Showcase of Principles, Case Studies & Novel Connections Created in the Spirit of Architectural Engineering.
TU Darmstadt
Ph.D. Thesis

Kiziltoprak, Nihat (2022)
On the Bi-Axial In-Plane Behavior of Laminated Paperboard Components in Construction: A Representative Engineering Model.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00021658
Ph.D. Thesis, Primary publication, Publisher's Version

Kohne, Thomas ; Bishara, Nadja ; Such, Martin ; Beck, Martin ; Stadler, Eva Maria ; Schneider, Jens (2021)
Energieoptimierte Wohnquartiere - Lösungen für die Energiewende.
In: QUARTIER, 4. Jahrgang, 2021
Article

Knaack, Ulrich ; Wolf, Alexander ; Bach, Rebecca
ed.: Bundesinstitut für Bau-, Stadt- und Raumforschung (2021)
Notunterkünfte aus Papier : Leichte, mobile, einfach zu installierende Wohnräume für Katastrophen und unerwartete demografische Veränderungen.
Book

Kreplin, Frederic ; Schabel, Samuel ; Lehmann, Martin ; Büter, Andreas ; Thomas, Mandy ; Arndt, Tiemo ; Mehlhase, Sabrina ; Biesalski, Markus ; Mittelstedt, Christian ; Maier, Andreas ; Kiziltoprak, Nihat ; Schneider, Jens ; Gilka-Bötzow, Albrecht ; Nazari Sam, Mona ; Koenders, E. A. B.
ed.: Schabel, Samuel (2020)
KOMPAP - Energieeffizientes Bauen durch Komposit-Materialien mit Papier.
Report

Kuntsche, Johannes K. ; Schuster, Miriam ; Schneider, Jens (2019)
Engineering design of laminated safety glass considering the shear coupling: a review.
In: Glass Structures & Engineering, 4 (2)
doi: 10.1007/s40940-019-00097-3
Article

Kanli, Evgenia ; Bach, Rebecca ; Götzinger, Robert ; Kiziltoprak, Nihat ; Knaack, Ulrich ; Schabel, Samuel ; Schneider, Jens (2019)
Case study: Development and evaluation methods for bio-based construction realized with paper-based building materials.
In: ICBBM 2019 Proceedings of the 3rd International Conference on Bio-Based Building Materials, Edition: 2019 Edition
Book Section

Kwon, M. ; Remoy, H. T. ; Dobbelsteen, A. A. J. F. van den ; Knaack, Ulrich (2019)
Personal control and environmental user satisfaction in office buildings: Results of case studies in the Netherlands.
In: Building and Environment, (149)
doi: 10.1016/j.buildenv.2018.12.021
Article

Kraus, Michael ; Schuster, Miriam ; Botz, Martin ; Schneider, Jens ; Siebert, Geralt (2019)
Zur Normung thermomechanischer Untersuchungen an polymeren Verbundglaszwischenschichten.
In: ce/papers, 3 (1)
doi: 10.1002/cepa.1003
Article

Kiziltoprak, Nihat ; Kanli, Evgenia ; Schneider, Jens ; Knaack, Ulrich ; Bach, Rebecca (2019)
Load capacity testing method for non-conventional nodes joining linear structural paper components.
doi: 10.1201/9781315229126
Conference or Workshop Item

Knaack, Ulrich
ed.: Luscurere, Peter (2018)
Design for deconstruction, or why aluminium and glass is better than wood?
In: Circulariteit, op weg naar 2050
Book Section

Knaack, Ulrich ; Linke, Hans-Joachim (2018)
Facades within sustainable urban development.
Workshop „Facades within sustainable urban development“. Ho Chi Minh City Vietnam (02.07.2018)
Conference or Workshop Item

Krimm, Jochen ; Techen, Holger ; Knaack, Ulrich (2018)
Update urban facades design for quieter outdoor spaces.
PowerSkin Conference - Munich, Germany. München (19.01.2017)
Conference or Workshop Item

Klein, T. ; Knaack, Ulrich ; Astudillo, J. ; Chica, J.A. (2018)
JFDE Special ICAE2018 – Envelope 4.0.
In: Journal of Facade Design & Engineering, 6 (2)
doi: 10.7480/jfde.2018.2.2297
Article

Knaack, Ulrich ; Koenders, E. A. B.
eds.: Knaack, Ulrich ; Koenders, E. A. B. (2018)
Bauphysik der Fassade.
Book

Kuntsche, Johannes K. ; Schuster, Miriam ; Schneider, Jens (2018)
Bemessung von Verbundsicherheitsglas unter Berücksichtigung des Schubverbunds durch polymere Zwischenschichten.
In: Der Bauingenieur, 93
Article

Kraus, Michael ; Schuster, Miriam ; Botz, Martin ; Schneider, Jens ; Siebert, Geralt (2018)
Thermorheologische Untersuchungen der Verbundglaszwischenschichten PVB und EVA.
Glasbau 2018. Dresden
Conference or Workshop Item

Knaack, Ulrich ; Pottgiesser, Uta (2017)
efnMOBILE 2.0 / Efficient Envelopes.
In: efnMOBILE 2.0 / Efficient Envelopes
Book Section

Knaack, Ulrich (2017)
Fassadentechnik Systeme, Konstruktion und Innovation: Akademieseminare.
Book

Knaack, Ulrich ; Bilow, Marcel (2017)
JFDE Special ICAE 2015.
In: Journal of Facade Design and Engineering, 3 (1)
Article

Knaack, Ulrich (2017)
Next steps on the facade roadmap.
ICBEST 2017: International Conference on Building Envelope Systems and Technologies. Istanbul, Turkey (15 May 2017 → 18 May 2017)
Conference or Workshop Item

Knaack, Ulrich (2017)
The role of Glass in Adaptive Facades.
Plenary Session GlassCon Global 2016 Conference. Boston USA (July 6th-9th, 2016)
Conference or Workshop Item

Klijn-Chevalerias, M. L. de ; Loonen, R. C. G. M. ; Zarzycka, A. ; De Witte, Dennis ; Sarakinioti, M. V. ; Hensen, J. L. M.
eds.: Turrin, Michela ; Peters, Brady ; O'Brien, Wiliam ; Stouffs, Rudi ; Dogan, Timur (2017)
Assisting the development of innovative responsive facade elements using building performance simulation.
SimAUD 2017. Toronto, ONT, Canada (22.05.2017 - 24.05.2017)
doi: 10.22360/simaud.2017.simaud.027
Conference or Workshop Item

Knaack, Ulrich ; Michel, M. (2017)
Adaptive structural Material for Reconfigurable Freeform Surfaces.
Proceedings of the IASS Annual Symposium 2017. (25 Sep 2017-28 Sep 2017)
Conference or Workshop Item

Knaack, Ulrich (2017)
Bauen mit Glas: Gebäudehülle - quo vadis?
In: XIA Intelligente Architektur, 07-09/17 (100)
Article

Kamerling, Wim ; Veer, Fred ; Schnater, Frank ; Knaack, Ulrich (2017)
Bouwsysteem Cellenbeton-Nobel: Verslag proeven trek/schuif/wringing.
Report

Knaack, Ulrich ; Mohsen, Alamir ; De Witte, Dennis (2017)
Concepts and samples for force and function optimisation of steel knots and ceramic wall components.
Deutscher Verband fur Materialforschung und – prüfung.
Conference or Workshop Item

Kultur, Sinem ; Knaack, Ulrich ; Türkeri, N. (2017)
Performance check tool for facade design.
ICBEST Istanbul: International Conference on Building Envelope Systems and Technologies.
Conference or Workshop Item

Knaack, Ulrich ; Klein, Tillmann ; Konstantinou, Thaleia (2017)
The Future Envelope #11: Next Business.
In: The Future Envelope #11: Next Business
Book Section

Knaack, Ulrich (2017)
The Total Envelope.
In: Diesseits der Form Architektur auf dem Weg zur Energiewende - xia Intelligente Architektur, 100 Beiträge aus 100 Ausgaben, 1994 - 2017
Book Section

Krimm, Jochen ; Knaack, Ulrich ; Techen, Holger (2017)
Updated urban facade design for quieter outdoor spaces.
In: Journal of Facade Design and Engineering, 5 (1)
doi: 10.7480/jfde.2017.1.1422
Article

Kwon, M. ; Remoy, H. T. ; Dobbelsteen, A. A. J. F. van den ; Knaack, Ulrich (2017)
User-focused design factors of workspace for nearly zero energy office renovation: findings from literature review.
24th Annual Conference of the European Real Estate Society. Delft, The Netherlands (28.06.-01.07.2017)
Conference or Workshop Item

Kwon, M. ; Remoy, H. T. ; Dobbelsteen, A. A. J. F. van den ; Knaack, Ulrich (2017)
User-focused design measurement factors of workspace for nearly zero energy office renovation: findings from literature review.
ERES 2017: 24th Annual Conference of the European Real Estate Society.
Conference or Workshop Item

Kraus, Michael ; Schuster, Miriam ; Kuntsche, Johannes K. ; Siebert, Geralt ; Schneider, Jens (2017)
Parameter identification methods for visco and hyperelastic material models.
Glass Performance Days. Tampere
Conference or Workshop Item

Krimm, Jochen ; Techen, Holger ; Knaack, Ulrich (2016)
Tuning acoustical facade designs aiming for a controlled influence on the urban soundscape.
45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future. Hamburg, Germany (21/08/16 → 24/08/16)
Conference or Workshop Item

Karagianni, L. ; Turrin, Michela ; Knaack, Ulrich ; Hordijk, G. J.
eds.: Ramtin, A. ; Chromis, A. ; Hanna, S. ; Turrin, Michela (2016)
Additive manufacturing for daylight : Towards a customized shading device.
Symposium on Simulation for Architecture and Urban Design. London (May, 16-18, 2016)
Conference or Workshop Item

Knaack, Ulrich (2016)
Journal of Façade Design and Engineering.
4 (1-2)
Journal

Knaack, Ulrich (2016)
Innovative façade technology using masonry – Solid construction 2.0, Innovative Fassadentechnik mit Mauerwerk – massiv construction 2.0.
In: Mauerwerk European Journal of Masonry, 1 (20)
Article

Knaack, Ulrich (2016)
Innovative Fassadentechnik mit Mauerwerk – massiv construction 2.0.
In: Mauerwerk European Journal of Masonry, 1 (20)
Article

Knaack, Ulrich ; Tessmann, Oliver ; Bilow, Marcel ; De Witte, Dennis ; Mohsen, Alamir (2016)
Imagine 10 – Rapids 02.
Book

Knaack, Ulrich ; Tessmann, Oliver (2016)
BE-AM Build Envirnment Additive Manufacturing.
BE-AM. TU Darmstadt (27.10.2016)
Conference or Workshop Item

Knaack, Ulrich (2016)
Facade Roadmap.
3. Simposio de Arquitectura y Energía. Santiago de Chile, Chile (05.11.-12.11.2016)
Conference or Workshop Item

Knaack, Ulrich (2016)
RAM Real Additive Manufacturing.
@TUD – Bouwkunde, 4TU.Bouw. Delft, Niederlande (21.10.2016)
Conference or Workshop Item

Knaack, Ulrich ; Schneider, Jens (2016)
Vom Material zum Produkt: Beispiele aus dem Bauwesen.
Kick-off-Workshop Profilbereich vom Material zur Produktinnovation. TU Darmstadt (01.06.2016)
Conference or Workshop Item

Knaack, Ulrich ; Pottgiesser, Uta ; Böke, Jens (2016)
Imagine 09 Prototyping efn mobile.
Book

Knaack, Ulrich ; Pottgiesser, U. ; Böke, J.
eds.: Knaack, Ulrich ; Klein, T. ; Bilow, M. (2016)
Imagine 09 – Prototyping efn Mobile.
Book

Knaack, Ulrich ; De Witte, Dennis (2016)
Real Additive Manufacturing.
In: 3TU.Bouw center of excellence for the built environment
Article

Knaack, Ulrich ; Schneider, Jens (2016)
Institut für Statik und Konstruktion.
In: Bau- und Umweltingenieurwissenschaften, Information zu Lehre, Forschung und Entwicklung am Fachbereich 13
Article

Knaack, Ulrich ; Henriksen, T. ; Lo, S. (2015)
Advances in the application of thin-walled GFRC elements.
In: Advances in Civil Engineering Materials, 4 (1)
doi: 10.1520/ACEM20140045
Article

Knaack, Ulrich (2015)
Check-up digital craftman-ship?
In: Fassadentechnik: Planung und Ausf�hrung der Geb�udeh�lle, 21 (4)
Article

Knaack, Ulrich (2015)
Check-up: Ready-to-fix the future?
In: Fassadentechnik: Planung und Ausführung der Gebäudehülle, 21 (1)
Article

Kuntsche, Johannes K. ; Schneider, Jens ; Schuster, Miriam ; Langer, S. (2015)
Viscoelastic properties of laminated glass interlayers – theory and experiments.
Glass Performance Days 2015. Tampere, Finland (23.-26.06.2015)
Conference or Workshop Item

Knaack, Ulrich ; Henriksen, Thomas ; Lo, Stephen (2015)
Advances in the application ofthin-walled glas fiber reinforced concrete elements.
In: Advances in Civil Engineering Materials, 4 (1)
Article

Knaack, Ulrich (2015)
Check up: Digital craftmanship.
In: fassaden technik, 4
Article

Knaack, Ulrich (2015)
Check up: Ready-to-fix the future?
In: Fassadentechnik, 21 (1)
Article

Knaack, Ulrich ; Bilow, Marcel (2015)
Fassaden aus dem Drucker?
In: Glaswelt: Glas, Fenster, Fassade, 10
Article

Knaack, Ulrich ; Klein, Tillmann (2015)
Adaptive building envelopes, component development as well as implementation strategies.
In: Journal of Facade Design & Engineering, 3 (2)
Article

Kuntsche, Johannes K. (2015)
Mechanisches Verhalten von Verbundglas unter zeitabhängiger Belastung und Explosionsbeanspruchung.
TU Darmstadt Institut für Statik und Konstruktion
Ph.D. Thesis

Kuntsche, Johannes K. ; Franz, Johannes ; Schneider, Jens (2015)
Untersuchungen zum Resttragverhalten von Verbundglas.
In: Glasbau 2015
Book Section

Knaack, Ulrich ; Hickert, Sascha ; Hildebrand, Linda (2015)
Concretable (Imagine 08).
Book

Knaack, Ulrich (2015)
Check up: Digital craftmanschip.
In: Fassadentechnik, 21 (4)
Article

Knaack, Ulrich ; Klein, T. ; Konstantinou, T. ; Prieto Hoces, A. (2015)
The Future Envelope - Unobtainium- conference proceedings.
Book

Knaack, Ulrich (2015)
Journal of Façade Design and Engineering.
3 (1)
Journal

Knaack, Ulrich (2015)
Journal of Façade Design and Engineering.
3 (2)
Journal

Knaack, Ulrich (2015)
Journal of Façade Design and Engineering.
3 (3-4)
Journal

Knaack, Ulrich ; Hickert, S. ; Hildebrand, L.
eds.: Knaack, Ulrich ; Klein, T. ; Bilow, M. (2015)
Imagine 08 – Concretable.
Book

Knaack, Ulrich (2015)
Check up: Ready-to-fix the future?, 21(1), 24-29.
In: Fassadentechnik, 21 (1)
Article

Karagianni, L. ; Turrin, Michela ; Knaack, Ulrich ; Hordijk, Truus (2015)
Additive manufacturing for daylight - towards a customized shading device.
TU Delft
Master Thesis

Knaack, Ulrich (2014)
Kurzporträt "Die Neuen": Ulrich Knaack.
In: hoch3. Die Zeitung der TU Darmstadt, (5)
Article

Knaack, Ulrich (2014)
De perfecte gevel bestaat niet.
In: Bouwformatie, (3)
Article

Knaack, Ulrich (2014)
Fassadenelemente.
In: Beton, 64 (4)
Article

Knaack, Ulrich (2014)
Facade Design and Engineering - Finding the scope within a growing community.
In: Journal of Facade Design and Engineering, 2 (3-4)
Article

Kuntsche, Johannes K. ; Schneider, Jens (2014)
Experimental and numerical investigation of the mechanical behavior of explosion resistant glazing.
Conference or Workshop Item

Kuntsche, Johannes K. ; Schneider, Jens (2014)
Mechanical behaviour of polymer interlayers in explosion resistant glazing.
Lausanne
Conference or Workshop Item

Knaack, Ulrich (2014)
Concrete canoe: Anthrazit mit roten Fugen. Sechs Meter lang, ein Kanu ganz aus Beton.
In: 52 Grad : das Magazin der Detmolder Schule für Architektur und Innenarchitektur, 5
Article

Knaack, Ulrich ; Klein, T. ; Bilow, M. ; Auer, T. (2014)
Fasaden: Prinzipien der Konstruktion.
Book

Knaack, Ulrich ; Bilow, M. ; Klein, T. (2014)
Innovationen fallen nicht vom Himmel.
In: Glaswelt: Glas, Fenster, Fassade, 2014 (1)
Article

Knaack, Ulrich (2014)
Roadmap Fassade - Stand 2014.
In: XIA Intelligente Architektur, 88 (7-9)
Article

Knaack, Ulrich (2014)
Fassadenforschung in Darmstadt.
In: Xia intelligente Architektur 10-12/14 Zeitschrift für Architektur und Technik, (89)
Article

Knaack, Ulrich ; Klein, T. ; Bilow, M. ; Auer, T. (2014)
Fassaden: Prinzipien der Konstruktion.
Book

Knaack, Ulrich (2014)
Potential for innovative massive building envelope systems – Scenario development towards integrated active systems.
In: Journal of Facade Design & Engineering, 2 (3-4)
doi: 10.3233/FDE-150024
Article

Knaack, Ulrich ; Klein, Tillmann (2014)
Facade Design and Engineering: Finding the scope within a growing community.
In: Journal of Facade Design & Engineering, 2 (3-4)
Article

Knaack, Ulrich (2014)
Roadmap Fassade – Stand 2014.
In: Xia intelligente Architektur, 88 (7/9)
Article

Kuntsche, Johannes K. ; Schneider, Jens (2013)
Explosion resistant glazing - experimental tests and numerical simulation.
In: Glass Performance Days Finland 2013
Book Section

Kuntsche, Johannes K. ; Schneider, Jens ; Kolling, Stefan (2013)
Mechanische Eigenschaften von Glas-Verbundmaterialien unter hohen Verzerrungsraten.
In: 2. Darmstädter Ingenieurkongress Bau und Umwelt
Book Section

Knaack, Ulrich
ed.: Cruz, P.J.S. (2013)
A facade roadmap.
In: Structures and architecture: Concepts, applications and challenges
Book Section

Konstantinou, T. ; Knaack, Ulrich (2013)
An approach to integrate energy efficiency upgrade into refurbishment design process, applied in two case-study buildings in Northern European climate.
In: Energy and Buildings, 59 (April)
doi: 10.1016/j.enbuild.2012.12.023
Article

Konstantinou, T. ; Knaack, Ulrich (2013)
An integrated refurbishment design process to energy efficiency.
In: Proceedings of CLIMA 2013: 11th REHVA world congress & 8th international conference on IAQVEC "Energy efficient, smart and healthy buildings"
Book Section

Knaack, Ulrich (2013)
Ausblick.
In: Umweltgerechtes Bauen: Potenzial ungenutzter Gebäudesubstanz
Book Section

Knaack, Ulrich ; Klein, T. (2013)
Editorial: Preface.
In: Journal of Facade Design and Engineering, 1 (1)
Article

Knaack, Ulrich ; Artmann, L.
ed.: Vetter, A. K. (2013)
Entwerfen und Konstruieren / Design and construction.
In: 1893 - 2013 Eine Schule für Gestaltung: 120 Jahre Lehrtradition an der Demolter Schule für Architektur und Innenarchitektur
Book Section

Knaack, Ulrich (2013)
Innovative massive Wandsysteme: eine Herleitung möglicher Szenarien.
In: Mauerwerk: Zeitschrift für Technik und Architektur, 17 (6)
doi: 10.1002/dama.201300600
Article

Knaack, Ulrich
eds.: Pottgiesser, U. ; Strauss, H. (2013)
Roadmap Fassade: Wege und Wegweiser.
In: Produktentwicklung Architektur: Visionen, Methoden, Innovationen
Book Section

Knaack, Ulrich ; Klein, T. (2013)
The Future Envelope 7 - façade value.
Conference or Workshop Item

Knaack, Ulrich (2013)
Innovative massive Wandsysteme – eine Herleitung möglicher Szenarien.
In: Mauerwerk - Jahrgang 17, (6)
doi: 10.1002/dama.201300600
Article

Knaack, Ulrich
eds.: Pottgiesser, U. ; Strauss, H. (2013)
Facade Road Map - paths and pathfinders.
In: Product Development and Architecture
Book Section

Konstantinou, T. ; Knaack, Ulrich (2013)
An approach to integrated energy efficiency upgrade into refurbishment design process, applied in two case-study buildings in Northern European climate.
In: Energy and Buildings, (59)
Article

Kolling, Stefan ; Schneider, Jens ; Gebbeken, Norbert ; Larcher, Martin ; Alter, Christian ; Kuntsche, Johannes K. (2012)
Deformations- und Bruchverhalten von Verbundsicherheitsglas unter dynamischer Beanspruchung.
In: Stahlbau
Book Section

Knaack, Ulrich (2012)
Building envelopes for tomorrow : smart, green, modular.
Conference or Workshop Item

Konstantinou, T. ; Knaack, Ulrich
ed.: Giulio, R. (2012)
Energy-efficiency upgrade of the residential building stock: An integrated approach to refurbishment design process.
Conference or Workshop Item

Knaack, Ulrich (2012)
Facades : road map to 2050.
Conference or Workshop Item

Knaack, Ulrich (2012)
Fassaden werden immer komplexer.
In: Fassade, 2012 (4)
Article

Knaack, Ulrich
eds.: Degenhardt, C. ; Horvath, D. ; Pauls, M. (2012)
Interview.
In: Future city lab: high urban-low carbon, dialogues
Book Section

Knaack, Ulrich ; Chung-Klatte, Sharon ; Hasselbach, Reinhard (2012)
Prefabricated systems : principles of construction.
Book

Knaack, Ulrich (2012)
Reimagining The Envelope.
In: Gevelbouw
Article

Knaack, Ulrich ; Klein, T. ; Bilow, M. (2012)
Reimagining housing.
Book

Knaack, Ulrich ; Bilow, M. ; Konstantinou, T. ; Lieverse, B. (2012)
Reimagining the envelope.
Book

Knaack, Ulrich ; Chung-Klatte, S. ; Hasselbach, R. (2012)
Systembau.
Book

Knaack, Ulrich (2012)
The future must be simpler.
In: Deutsche Bau Zeitschrift, 2012 (9)
Article

Knaack, Ulrich ; Klein, T. ; Bilow, M. ; Techen, H.
ed.: Mehl, R. (2012)
Total concrete: Die nächste Generation massiver Fassaden.
In: Beton Bauteile 2013: Entwerfen Planen Ausführen
Book Section

Knaack, Ulrich ; Klein, T. ; Billow, M. (2012)
Imagine 06 – reimagining the envelope.
Book

Knaack, Ulrich ; Chung-Klatte, Sharon ; Hasselbach, Reinhard (2012)
Prefabricated systems : principles of construction.
Book

Knaack, Ulrich ; Auer, Thomas ; Bilow, Marcel ; Hildebrand, L. (2011)
Energy.
Book

Knaack, Ulrich
eds.: Stacey, F. ; Stacey, M. (2011)
About innovation : or how and why facades undergo constant development.
Adaptive architecture. London (03.03.2011 - 05.03.2011)
Conference or Workshop Item

Knaack, Ulrich ; Klein, T. ; Bilow, M. ; Techen, H. (2011)
Performance driven envelopes.
Book

Konstantinou, T. ; Knaack, Ulrich (2011)
Refurbishment of residential buildings : a design approach to energy-efficiency upgrades.
Green buildings and sustainable cities (GBSC). Bologna (15.9.-16.9.2011)
Conference or Workshop Item

Knaack, Ulrich ; Klein, T. (2011)
The Future Envelope 5.
Book

Knaack, Ulrich ; Bilow, M. ; Hildebrand, L. ; Auer, T. (2011)
Imagine 05 Energy.
Book

Knaack, Ulrich ; Bilow, M. ; Klein, T. ; Auer, T. (2011)
Gevels - Principes van het construeren.
Book

Knaack, Ulrich
eds.: Katgerman, L. ; Soetens, F. (2010)
Aluminium in facades.
In: New Frontiers in Light Metals : Proceedings of the 11th International Aluminium Conference (INALCO 2010)
Book Section

Knaack, Ulrich (2010)
Bauen mit Glas.
In: XIA Intelligente Architektur, 72
Article

Knaack, Ulrich (2010)
Bewegte Hülle.
In: Detmolder Schule für Architektur und Innenarchitektur, (1)
Article

Knaack, Ulrich (2010)
Constructionlab - Die gedruckte Fassade?
In: Detmolder Schule für Architektur und Innenarchitektur, 2010 (1)
Article

Knaack, Ulrich (2010)
Graue Energie in der Fassade.
In: Detmolder Schule für Architektur und Innenarchitektur, 2010 (1)
Article

Knaack, Ulrich
eds.: Meyer, D. ; Zihlmann, U. (2010)
Innovative materials and embodied energy.
In: Facade 2010 - conference on building envelopes
Book Section

Knaack, Ulrich ; Bilow, M. ; Strauss, H. (2010)
Rapids - Layere fabrication technologies for facades and building construction.
Book

Knaack, Ulrich (2010)
The total envelope.
In: Xia Intelligente Architektur, 72
Article

Kleuderlein, J. ; Schneider, Jens (2010)
Flächige und punktuelle Fügetechniken bei Gläsern.
In: deutsche bauzeitung db, (Nr. 11)
Article

Knaack, Ulrich ; Bilow, Marcel ; Strauss, Holger (2010)
Rapids – Layered fabrication technologies for facades and building construction.
Book

Knaack, Ulrich (2009)
De gevelbouwer.
In: Gevelbouw, 6 (4)
Article

Knaack, Ulrich (2009)
Naar een integrale aanpak van gavel en klimaatinstallaties.
In: Gevelbouw, 6 (1)
Article

Knaack, Ulrich ; Techen, Holger (2009)
Konstruktiver Glasbau – auf Distanz.
In: Stahlbau, 78 (S 1)
Article

Knaack, Ulrich ; Hofmeister, L. (2009)
Bewertung von Fassaden vor dem Hintergrund von grauer Energie.
In: Innovative Fassadentechnik
Book Section

Knaack, Ulrich
eds.: Calabrese, L. ; ten Doeschate, A. ; Geenen, A. ; Hauptmann, D. ; Heintz, J. ; Knaack, U. (2009)
BK2000 - a design project.
In: The Architecture Annual 2007-2008
Book Section

Knaack, Ulrich (2009)
Column.
In: Gevelbouw, 6 (1)
Article

Knaack, Ulrich (2009)
De architect: creatief brein of bouwbureau.
In: Gevelbouw, 6 (2)
Article

Knaack, Ulrich (2009)
Developing ideas on the move.
In: Dax, 4 (24)
Article

Knaack, Ulrich ; Hildebrand, Linda (2009)
Graue Energie in der Fassade - Ökologie Indikator.
In: Zeno, 4 (09)
Article

Knaack, Ulrich (2009)
Report: Fassadentechnik-Bauen mit Glas.
In: Xia intelligente architektur, 7-9
Article

Knaack, Ulrich ; Bilow, Marcel ; Strauss, Holger (2009)
Rapid Technologien und Architektur.
In: Xia intelligente Architektur, (10-12/2009)
Article

Knaack, Ulrich ; Klein, Tillmann (2009)
façade technology. inspiring emerging developments.
In: Dax, 4 (24)
Article

Knaack, Ulrich
ed.: Dobbelsteen, A. A. J. F. van den (2009)
Future facade principles.
3rd CIB International Conference on Smart and Sustainable Built Environments. Delft, Niederlande (15. - 19. Juni 2009)
Conference or Workshop Item

Knaack, Ulrich (2009)
Innovative Materialien und graue Energie.
In: Bauen mit Innovativen Werkstoffen, 2084
Article

Kooymans, J. ; Techen, H. ; Schneider, Jens
eds.: Bos, F. ; Louter, C. ; Veer, F. (2008)
Long Span Glass Fin Design.
Conference on Architectural and Structural Applications of Glass. TU Delft (22.-23.05.2008)
Conference or Workshop Item

Knaack, Ulrich (2008)
Experimenteren, testen en bouwen.
In: Stedebouw en Architectuur, 25 (8)
Article

Knaack, Ulrich ; Bilow, Marcel (2008)
Glasfaserbeton - neue Ansätze in der Verwendung von Glas.
In: Glas: Architektur und Technik, 14 (2)
Article

Knaack, Ulrich ; Badnarnah, L. (2008)
Shading/Energy generating skin inspired from natural systems.
SB08 World sustainable building conference 2008. Melbourne (21 Sep 2008 → 25 Sep 2008)
Conference or Workshop Item

Knaack, Ulrich (2008)
Driving the future of glass.
Conference or Workshop Item

Knaack, Ulrich (2008)
Grenzen des Machbaren : Ein Versuch, Fassaden neu zu interpretieren.
Fassaden - Blick in die Zukunft - Dusseldorf. Düsseldorf (22 Apr 2008 → 23 Apr 2008)
Conference or Workshop Item

Knaack, Ulrich ; Bilow, Marcel
eds.: Berger, J. ; Fischer, A. ; Himburg, S. ; Kramp, M. (2008)
Innovationen im Fassadenbau.
Berliner Hoch- und Ingenieurbaukolloquium BHIK 08. Berlin
Conference or Workshop Item

Knaack, Ulrich
eds.: Eekhout, ACJM ; Tomiyama, Tetsuo (2008)
Integrated design in architecture - and what comes next?
Delft science in design 2 : conference proceedings 2007. TU Delft, Delft, Netherlands (4 Apr 2008 → 4 Apr 2008)
Conference or Workshop Item

Knaack, Ulrich ; Klein, Tillmann ; Bilow, Marcel (2008)
Imagine 01- Facades.
Book

Knaack, Ulrich ; Klein, Tillmann ; Bilow, Marcel (2008)
Imagine 02 - Deflateables.
Book

Knaack, Ulrich (2007)
Workshop high-rise buildings 2007 - een verslag.
In: Boss Magazine
Article

Knaack, Ulrich ; Nolte, C. (2007)
Tragwerksplanung – Untersuchung Holz / Beton.
Lecture

Knaack, Ulrich ; Bilow, Marcel (2007)
Airick.
In: Detmolder Schule für Architektur und Innenarchitektur, 1
Article

Knaack, Ulrich (2007)
Fassaden - Prinzipien und Konstruktion.
In: Bauwelt, 33
Article

Knaack, Ulrich (2007)
Gevels van de toekomst.
In: BouwIQ, 12 (4)
Article

Knaack, Ulrich (2007)
Proefdraaien voor de praktijk - hoogbouwworkshop aan de TU Delft succesvol.
In: ZO techniplan advieurs bv
Article

Knaack, Ulrich (2007)
Vezelversterkt beton: modulair en zelfdragend.
In: BouwIQ, 12 (2)
Article

Knaack, Ulrich (2007)
Voorgespannen kabelnetgevels heel veel glas en een beetje staal.
In: Dax, 3 (15)
Article

Knaack, Ulrich (2007)
Whats next.
In: Gevelbouw, 4 (1)
Article

Knaack, Ulrich ; Thevis, E. ; Schwickert, S. (2007)
Prefabricated Houses.
In: Detmolder Schule für Architektur und Innenarchitektur, 1 (15)
Article

Knaack, Ulrich ; Badarnah, L. (2007)
Bio-Inspired Ventilation System for Building Envelopes.
Building Stock Activation 2007 International Conference of 21st Century COE Program of Tokyo Metropolitan University - Tokyo. Tokyo (5 Nov 2007 → 7 Nov 2007)
Conference or Workshop Item

Knaack, Ulrich ; Badarnah, L. (2007)
Bionic Ventilation System for Building Envelopes.
Building Stock Activation 2007 International Conference of 21st Century COE Program of Tokyo Metropolitan University - Tokyo. Tokyo (5.11.07 -7.11.07)
Conference or Workshop Item

Knaack, Ulrich ; Bilow, Marcel ; Auer, Thomas (2007)
Facades.
Book

Knaack, Ulrich (2006)
Tragendes Glas, Wege zur Enmaterialisierung des Raums.
glasstec 2006.
Conference or Workshop Item

Knaack, Ulrich (2006)
Werkbundsiedlungen als Vorbild für die Zukunft: Ganzheitliches: Nachhaltigkeit.
Symposien zur Werkbundsiedlung Wiesenfeld in München. München
Conference or Workshop Item

Knaack, Ulrich (2006)
Namen & gezichten.
In: Dax, 2 (8)
Article

Knaack, Ulrich ; Bilow, Marcel (2006)
Pneumatische en vacuümversterkte constructies: De mogelijkheden van lucht.
In: BouwIQ, 11 (7)
Article

Knaack, Ulrich ; Hasselbach, R. (2006)
Introduction new strategies for systems.
New strategies for systems. Delft (19 May 2006 → 19 May 2006)
Conference or Workshop Item

Knaack, Ulrich (2006)
The future for glass starts today : on fixings, breathing, energy.
Conference proceedings ISAAG 2006 : international symposium on the application of architectural glass. München (30/10/06 → 31/10/06)
Conference or Workshop Item

Knaack, Ulrich ; Ebbert, T. (2006)
The integral enveloppe applied for sustainable office refurbishment.
SASBE2006 - 2ndCIB International Conference on Smart and Sustainable Built Environments; Proceedings. Shanghai, China
Conference or Workshop Item

Knaack, Ulrich ; Pottgiesser, Uta ; Bilow, Marcel (2006)
Fassade 2006: Sanierung und Erneuerung.
In: Fassade 2006
Book Section

Knaack, Ulrich (2006)
Imagine - Inaugurele Rede.
Other

Knaack, Ulrich ; Klein, Tillmann (2005)
Fassadenplanung mit Systemen.
In: Deutsches Architektenblatt, 37 (12)
Article

Knaack, Ulrich ; Pottgiesser, Uta ; Bilow, Marcel (2005)
Technologietransfer in Richtung Architektur.
In: Deutsche Bau Zeitschrift, 53 (11)
Article

Knaack, Ulrich (2005)
Material und Konstruktion.
In: Fassade 2005: energie-material-konstruktion
Article

Knaack, Ulrich ; Pottgiesser, Uta ; Bilow, Marcel (2005)
Book Editorship.
In: Fassade 2005: Energie - Material - Konstruktion
Article

L

Lorenzen, Steven ; Berthold, Hagen ; Rupp, Maximilian ; Schmeiser, Leon ; Apostolidi, Eftychia ; Schneider, Jens ; Brötzmann, Jascha ; Thiele, Christian-Dominik ; Rüppel, Uwe
eds.: Casas, Joan ; Frangopol, Dan M. ; Turmo, Jose (2022)
Deep learning based indirect monitoring to identify bridge natural frequencies using sensors on a passing train.
11th International Conference on Bridge Maintenance, Safety and Management. Barcelona, Spain (11-15.07.2022)
doi: 10.1201/9781003322641-46
Conference or Workshop Item

Lorenzen, Steven Robert ; Berthold, Hagen ; Rupp, Maximilian ; Schmeiser, Leon ; Schneider, Jens ; Thiele, Christian-Dominik ; Brötzmann, Jascha ; Rüppel, Uwe (2022)
Künstliche Intelligenz, Digitale Zwillinge und die Zukunft des Brückenmanagements.
7. VDI-Fachtagung Baudynamik. Würzburg (27. und 28. April 2022)
Conference or Workshop Item

Lorenzen, Steven Robert ; Riedel, Henrik ; Rupp, Maximilian Michael ; Schmeiser, Leon ; Berthold, Hagen ; Firus, Andrei ; Schneider, Jens (2022)
Virtual Axle Detector Based on Analysis of Bridge Acceleration Measurements by Fully Convolutional Network.
In: Sensors, 22 (22)
doi: 10.26083/tuprints-00022977
Article, Secondary publication, Publisher's Version

Lorenzen, Steven Robert ; Riedel, Henrik ; Rupp, Maximilian Michael ; Schmeiser, Leon ; Berthold, Hagen ; Firus, Andrei ; Schneider, Jens (2022)
Virtual Axle Detector Based on Analysis of Bridge Acceleration Measurements by Fully Convolutional Network.
In: Sensors, 22 (22)
doi: 10.3390/s22228963
Article

Lüling, Claudia ; Bauder, Hans-Jürgen ; Beuscher, Johanna ; Maier, Andreas ; Nagel, Dominik ; Rucker-Gramm, Petra ; Schneider, Jens ; Weilandt, Agnes ; Weimer, Timo (2021)
Textiler Leichtbau – Gewebt, gewirkt, geschäumt : 3D Textilien für die Gebäudehülle (ge3TEX).
Report

Lüling, Claudia ; Rucker-Gramm, Petra ; Weilandt, Agnes ; Beuscher, Johanna ; Nagel, Dominik ; Schneider, Jens ; Maier, Andreas ; Bauder, Hans-Jürgen ; Weimer, Timo (2021)
Advanced 3D Textile Applications for the Building Envelope.
In: Applied Composite Materials, 2021
doi: 10.1007/s10443-021-09941-8
Article

Lu, Yao ; Cregan, Matthew ; Chhadeh, Philipp Amir ; Seyedahmadian, Alireza ; Bolhassani, Mohammad ; Schneider, Jens ; Yost, Joseph Robert ; Akbarzadeh, Masoud (2021)
All glass, compression-dominant polyhedral bridge prototype : form-finding and fabrication.
Conference or Workshop Item

Lange, Jörg ; Heyden, Aaron von der ; Knaack, Ulrich ; Kanli, Evgenia (2021)
A Bridge Built of Paper - A Master’s-Course Project for Civil Engineering Students.
In: Structural Engineering International, (2)
doi: 10.1080/10168664.2020.1838250
Article

Lange, Jörg ; Knaack, Ulrich ; Feucht, Thilo ; Erven, Maren ; Borg Costanzi, Christopher ; Waldschmitt, Benedikt
eds.: Bischoff, Manfred ; Scheven, Malte von ; Oesterle, Bastian (2020)
3-D gedruckte Fußgängerbrücke aus Stahl.
14. Fachtagung Baustatik - Baupraxis. Stuttgart (23. und 24. März 2020)
Conference or Workshop Item

Lübke, Julia ; Wettlaufer, Marius ; Kiziltoprak, Nihat ; Drass, Michael ; Schneider, Jens ; Knaack, Ulrich (2018)
Honeycomb-Paperboard Glass Composite Beams.
In: Ce/papers, 2 (5-6)
doi: 10.1002/cepa.910
Article

Luible, A. ; Gosztonyi, S. ; Overend, M. ; Aelenei, L. ; Krstic-Furundzic, A. ; Perino, M. ; Goya, F. ; Wellershoff, F. ; Attia, S. ; Pottgiesser, U. ; Knaack, U. ; Louter, P. C. (2018)
Facade 2018 - Adaptive! : Proceedings of the COST Action TU1403 Adaptive Facades Network Final Conference.
Book

Langner, Normen ; Bewersdorff, David (2015)
Thermal and Acoustical Simulation of Open Space Working Areas with Thremally Activated Building Systems (TABS).
3rd Annual International Conference on Architecture and Engineering ACE 2015. Singapore (13.-14.04.2015)
Conference or Workshop Item

Langner, Normen ; Bewersdorff, David (2015)
Thermal and acoustical simulation of open space working Areas in commercial Buildings equipped with thremally activated Builduing systems.
14th Conference of International Building Performance Simulation Association. Hyderabad, India (7.-9. Dezember 2015)
Conference or Workshop Item

Luible, A. ; Overend, M. ; Aelenei, L. ; Knaack, Ulrich ; Perino, M. ; Wellershoff, F. (2015)
Adaptive façade network – Europe.
Book

Langner, Normen ; Bewersdorff, David (2015)
Thermal and acoustical simulation of open space working Areas in commercial Buildings Equipped with thermally activated Building systems.
14. Conference of International Building Performance Simulation Association (IBPSA 2015). Hyderabad, India
Conference or Workshop Item

Langner, Normen ; Bewersdorff, David (2014)
Simulation Based Planning of Open Space Working Areas in Commercial Buildings.
ASim 2014, IBPSA Asia Conference. Nagoya, Japan (28.-29.11.2014)
Conference or Workshop Item

Langner, Normen ; Bewersdorff, David (2013)
Sommerlicher Wärmeschutz nach DIN 4108-2: Abgleich der Übertemperaturgradstunden aus der thermischen Simulation mit dem Sonneneintragskennwert am Beispiel unterschiedlicher Raumsituationen.
Bauphysiktage Kaiserslautern 2013. Kaiserslautern
Conference or Workshop Item

M

Maier, Andreas (2023)
Ultraleichter, zementgebundener Schaum als Kernwerkstoff von Sandwichelementen.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00023247
Ph.D. Thesis, Primary publication, Publisher's Version

Müller-Braun, Steffen (2022)
Risssystem und Festigkeit der geschnittenen Kante von Floatglas.
TU Darmstadt
Ph.D. Thesis

Maier, Andreas ; Hochrein, M. ; Schneider, Jens ; Joppien, Anett-Maud (2021)
Energieeffizienz weitergedacht: die thermisch aktivierte Gebäudehülle als Teil einer Prozesskette.
In: Bautechnik, 98 (1)
doi: 10.1002/bate.201900107
Article

Mohsen, Alamir (2020)
Design to manufacture of complex building envelopes : single layer envelopes: mullion-transom systems + 3D printed metal nodes.
TU Darmstadt
Ph.D. Thesis

Müller-Braun, Steffen ; Franz, Johannes ; Schneider, Jens ; Schneider, Frank (2018)
Optische Merkmale der Glaskante nach Glaszuschnitt mit Schneidrädchen.
In: Glasbau 2018, 2 (1)
doi: 10.1002/cepa.634
Article

Maurer, Christoph ; Sprenger, Wendelin ; Franz, Steffen ; Lodewijks, Jan ; Rüppel, Uwe ; Kuhn, Tilmann E.
eds.: Auer, Thomas ; Knaack, Ulrich ; Schneider, Jens (2017)
Machine code functions in BIM for cost-effective high-quality buildings.
PowerSkin Conference. Munich (19. January 2017)
Conference or Workshop Item

Maier, Andreas ; Schneider, Jens ; Wien, A. ; Stephan, J. (2017)
Ein Gebäude als Maschine für Maschinen im Gebäude.
In: Deutsche BauZeitschrift DBZ, 65 (1)
Article

Maier, Andreas (2017)
Die ETA-Fabrik: Ein Industriegebäude als Teil der Prozesskette.
Future Factory Design Symposium. Technische Universität München, Fakultät für Architektur, Professur für Entwerfen und Gebäudehülle (09. März 2017)
Conference or Workshop Item

Müller-Braun, Steffen ; Schneider, Jens (2017)
Biaxially curved glass with large radii - determination of strength using the coaxial double ring test.
In: Glass Structures & Engineering, 2 (2)
doi: 10.1007/s40940-017-0050-9
Article

Maier, Andreas ; Kleuderlein, Jonas ; Schneider, Jens (2016)
Einfluss von Bauwerksverformungen auf Fassadenkonstruktionen aus Glas am Beispiel der ETA-Fabrik.
In: Glasbau 2016, 85 (S1)
Article

Maier, Andreas ; Schneider, Jens ; Knaack, Ulrich (2016)
ETA-Fabrik- Ein Industriegebäude als Teil der Prozesskette.
In: Xia intelligente Architektur 07-09/16, Zeitschrift für Architektur und Technik, 9689
Article

Maier, Andreas ; Schneider, Jens ; Knaack, Ulrich ; Beck, Martin (2016)
ETA-Fabrik – Ein Industriegebäude als Teil der Prozesskette.
In: Xia intelligente architektur, 96
Article

Maier, Andreas (2016)
Die energieeffiziente Fabrik: Planung und Bau der ETA-Fabrik.
ISOLAR Symposium 2016. TU Darmstadt (25.02.2016)
Conference or Workshop Item

Maier, Andreas (2016)
Energieeffizienz im Industriebau – Ein Demonstrator an der TU Darmstadt N.
Gastvorlesung an der TH Nürnberg im Rahmen des Masterstudiengangs Internationales Bauwesen – Energie und Umwelt – Ressourcenschonendes Bauen. Nürnberg (02.06.2016)
Conference or Workshop Item

Maier, Andreas ; Schneider, Jens ; Knaack, Ulrich (2016)
ETA Fabrik ein Industriegebäude als Teil einer Prozesskette.
In: Intelligente Architektur / AIT Spezial Ausgabe 9689
Article

Meißner, Simon (2014)
Numerische Studien zum in-situ Setzungsverhalten von Gründungssystemen unter zyklischer Einwirkung in nichtbindigen Böden.
TU Darmstadt
Ph.D. Thesis, Primary publication

Michel, Matthias ; Knaack, Ulrich (2014)
Grundlagen zur Entwicklung adaptiver Schalungssysteme für frei geformte Betonbauteile.
Conference or Workshop Item

Maier, Andreas ; Pepeliankova, R. ; Marder, R. ; Grassegger-Schön, G.
eds.: Patitz, Gabriele ; Grassegger, Gabriele ; Wölbert, Otto (2011)
Der ehemalige Hindenburgbau in Stuttgart : Kartierung eines Kulturdenkmals.
In: Natursteinsanierung Stuttgart 2011
Book Section

Meijs, M. H. ; Knaack, Ulrich (2010)
Bouwdelen en verbindingen - Principes van het construeren.
Book

Meijs, M. H. ; Knaack, Ulrich (2009)
Bauteile und Verbindungen.
Book

Meijs, M. H. ; Knaack, Ulrich (2009)
Components and Connections.
Book

N

Nielsen, Jens Henrik ; Thiele, Kerstin ; Schneider, Jens ; Meyland, Martin J. (2021)
Compressive zone depth of thermally tempered glass.
In: Construction and Building Materials, 310
doi: 10.1016/j.conbuildmat.2021.125238
Article

Nzahabwanimana, Alexis (2009)
Effects of seismic soil-structure interaction on the bearing capacity factors for shallow strip footings.
TU Darmstadt
Ph.D. Thesis

O

Oechsner, Matthias ; Hanson, Jutta ; Schneider, Jens ; Abele, Eberhard ; Beck, Martin ; Schraml, Philipp ; Conci, Mira
eds.: Worms, Martin J. ; Radermacher, Franz J. (2018)
Effizienzsteigernde Vernetzung an der Technischen Universität Darmstadt.
In: Klimaneutralität – Hessen 5 Jahre weiter, Edition: 1. Auflage
doi: 10.1007/978-3-658-20606-2_45
Book Section

P

Paschke, Franz ; Bishara, Nadja ; Schulz, Isabell ; Kocer, Cenk ; Schneider, Jens ; Maier, Andreas (2021)
In situ U g-value measurement on three different glazing types.
In: Journal of Physics: Conference Series, 2069
doi: 10.1088/1742-6596/2069/1/012134
Article

Pour-Moghaddam, Navid (2019)
On the fracture behaviour and the fracture pattern morphology of tempered soda-lime glass.
TU Darmstadt
Ph.D. Thesis

Paschke, Franz ; Kocer, Cenk (2019)
The Thermo-Mechanical Performance of a Vacuum Insulated Glazing Window.
Glass Performance Days. Tampere, Finnland (26.06.2019 - 28.06.2019)
Conference or Workshop Item

Prieto Hoces, A. I. ; Knaack, Ulrich ; Auer, T. ; Klein, T. (2019)
COOLFACADE: State-of-the-art review and evaluation of solar cooling technologies on their potential for facade integration.
In: Renewable and Sustainable Energy Reviews, 101
doi: 10.1016/j.rser.2018.11.015
Article

Pourmoghaddam, Navid ; Kraus, Michael ; Schneider, Jens ; Siebert, Geralt (2018)
Prediction of the 2D macro-scale fragmentation of tempered glass using random Voronoi tesselations.
In: Forschungskolloquium 2018 Grasellenbach.
doi: 10.1007/978-3-658-23627-4_21
Article

Pourmoghaddam, Navid ; Kraus, Michael ; Schneider, Jens ; Siebert, Geralt (2018)
Relationship between strain energy and fracture pattern morphology of thermally tempered glass for the prediction of the 2D macro-scale fragmentation of glass.
In: Glass Structures and Engineering
doi: 10.1007/s40940-018-00091-1
Article

Prieto Hoces, A. I. ; Knaack, Ulrich ; Auer, T. ; Klein, T. (2018)
Passive cooling & climate responsive façade design: Exploring the limits of passive cooling strategies to improve the performance of commercial buildings in warm climates.
In: Energy and Buildings, 175
doi: 10.1016/j.enbuild.2018.06.016
Article

Pourmoghaddam, Navid ; Kraus, Michael ; Schneider, Jens ; Siebert, Geralt
eds.: Schneider, Jens ; Weller, Bernhard (2018)
The geometrical properties of random 2D Voronoi tesselations for the prediction of the tempered glass fracture pattern.
Conference or Workshop Item

Prieto Hoces, A. I. ; Knaack, Ulrich ; Auer, T. ; Klein, T. (2018)
Feasibility Study of Self-Sufficient Solar Cooling Façade Applications in Different Warm Regions.
In: Energies, 11 (6)
doi: 10.3390/en11061475
Article

Pourmoghaddam, Navid ; Schneider, Jens (2018)
Determination of the engine power for quenching of glass by forced convection: simplified model and experimental validation of residual stress levels.
In: Glass Structures and Engineering
doi: 10.1007/s40940-018-0078-5
Article

Pourmoghaddam, Navid ; Schneider, Jens (2018)
Finite-element analysis of the residual stresses in tempered glass plates with holes or cut-outs.
In: Glass Structures and Engineering, 3
doi: 10.1007/s40940-018-0055-z
Article

Pourmoghaddam, Navid ; Schneider, Jens (2018)
Experimental investigation into the fragment size of tempered glass.
In: Glass Struct. Eng., 3
doi: 10.1007/s40940-018-0062-0
Article

Pourmoghaddam, Navid ; Schneider, Jens (2018)
Doppelringbiegeversuche an Glasplatten aus Kalk-Natron-Silikatglas bei erhöhten Temperaturen bis in den Transformationsbereich.
In: Glasbau 2018, 2 (1)
Article

Pottgiesser, U. ; Knaack, Ulrich ; Louter, C. ; Luible, A. ; Konstantinou, T. ; Metcalfe, D. ; Henriksen, T. (2018)
Dissemination, Future Research and Education: Adaptive Facade Network.
Book

Prieto Hoces, A. I. ; Knaack, U. ; Klein, T. ; Auer, T. (2018)
Possibilities and Constraints for the Widespread Application of Solar Cooling Integrated Façades.
In: Journal of Facade Design & Engineering, 6 (3)
doi: 10.7480/jfde.2018.3.2468
Article

Prieto Hoces, A. I. ; Klein, Tillmann ; Knaack, Ulrich ; Auer, Thomas (2017)
Main perceived barriers for the development of building service integrated facades: Results from an exploratory expert survey.
In: Journal of building engineering, 13
doi: 10.1016/j.jobe.2017.07.008
Article

Prieto Hoces, A. I. ; Knaack, Ulrich ; Klein, Tillmann ; Auer, Thomas (2017)
25 Years of cooling research in office buildings: Review for the integration of cooling strategies into the building façade (1990–2014).
In: Renewable & Sustainable Energy Reviews, 71
doi: 10.1016/j.rser.2017.01.012
Article

Prieto Hoces, A. I. ; Klein, Tillmann ; Knaack, Ulrich
eds.: Emmitt, S. ; Adeyeye, K. (2016)
Facade integration: Survey-based assessment of the main problems for the integration of building services in facade systems.
Integrated Design Conference ID@50. Bath, United Kingdom (29 Jun 2016 - 1 Jul 2016)
Conference or Workshop Item

Pelfrene, Joren ; Kuntsche, Johannes K. ; Dam, Sam van ; Paepegem, Wim van ; Schneider, Jens (2016)
Critical assessment of the post-breakage performance of blast loaded laminated glazing: Experiments and simulations.
In: International Journal of Impact Engineering, 88
Article

Pourmoghaddam, Navid ; Nielsen, Jens Henrik ; Schneider, Jens
eds.: Schneider, Jens ; Weller, Bernhard (2016)
Numerical simulation of residual stresses at holes near edges and corners in tempered glass: A parametric study.
Engineered Transparency. Düsseldorf (20.-21.9.2016)
Conference or Workshop Item

Pottgiesser, U. ; Hemmerling, M. ; Knaack, Ulrich ; Schulz, J. U. ; Schwesig, M. ; Schwickert, S. (2013)
Forschung\ConstructionLab.
In: 52 Grad : das Magazin der Detmolder Schule für Architektur und Innenarchitektur, 2013 (4)
Article

Pottgiesser, Uta ; Knaack, Ulrich ; Böke, J. (2013)
Facade 2013 – Design vs development : November 29th, ConstructionLab.
Book

Pottgiesser, U. ; Knaack, Ulrich ; Strauss, H. (2011)
Facade 2011 : Super green.
Book

Pottgiesser, U. ; Knaack, Ulrich ; Strauss, H. (2011)
Façade 2011 - Super Green : conference volume.
Book

R

Rosendahl, Philipp Laurens ; Wolf, Alexander
eds.: Cruz, Paulo J.S. ; Hvejsel, Marie Frier (2022)
The business case for 3D printing in the built environment.
5th International Conference on Structures & Architecture. Aalborg (06.-08.07.2022)
doi: 10.1201/9781003023555-31
Conference or Workshop Item

Riedel, Henrik ; Mokdad, Sleheddine ; Schulz, Isabell ; Kocer, Cenk ; Rosendahl, Philipp Laurens ; Schneider, Jens ; Kraus, Michael A. ; Drass, Michael (2022)
Automated quality control of vacuum insulated glazing by convolutional neural network image classification.
In: Automation in Construction, 135
doi: 10.1016/j.autcon.2022.104144
Article

Reiterer, Michael ; Firus, Andrei ; Lombaert, Geert ; Schneider, Jens ; Kohl, Antonia M. (2021)
Railway bridge dynamics : development of a new high-speed train load model for dynamic analyses of train crossing.
IABSE Congress: Structural Engineering for Future Societal Needs. Ghent, Belgium (22.-24.09.2021)
doi: 10.2749/ghent.2021.1633
Conference or Workshop Item

Roswag-Klinge, Eike ; Knaack, Ulrich ; Endres, Elisabeth ; Mehnert, Jan ; Hildebrand, Linda ; Schweiker, Marcel (2021)
State of the Art and Potentials of Additive Manufactured Earth (AME).
9th PowerSKIN Conference. München (09.04.2021)
Conference or Workshop Item

Rosendahl, Philipp Laurens ; Weißgraeber, Philipp (2020)
A comprehensive elastic and fracture model for stratified snowpacks.
EGU General Assembly Online. (4–8 May 2020)
doi: 10.5194/egusphere-egu2020-2409
Conference or Workshop Item

Rosendahl, Philipp Laurens ; Staudt, Yves ; Odenbreit, Christoph ; Schneider, Jens ; Becker, Wilfried (2019)
Measuring mode I fracture properties of thick-layered structural silicone sealants.
In: International Journal of Adhesion and Adhesives, 91
doi: 10.1016/j.ijadhadh.2019.02.012
Article

Rosendahl, Philipp Laurens ; Staudt, Yves ; Schneider, Alexandra Patrizia ; Schneider, Jens ; Becker, Wilfried
eds.: Gleim, T. ; Lange, S. (2019)
Hyperelastic adhesive joints: from crack nucleation to ultimate failure.
Proceedings of the 8th GACM Colloquium on Computational Mechanics, Kassel, Germany.
Conference or Workshop Item

Rosendahl, Philipp Laurens ; Staudt, Yves ; Schneider, Alexandra Patrizia ; Schneider, Jens ; Becker, Wilfried (2019)
Crack nucleation, crack growth and crack arrest in structural glazing sealants.
2nd Finite Fracture Mechanics Workshop.
Conference or Workshop Item

Rosendahl, Philipp Laurens ; Staudt, Yves ; Schneider, Alexandra Patrizia ; Schneider, Jens ; Becker, Wilfried (2019)
Nonlinear elastic finite fracture mechanics: Modeling mixed-mode crack nucleation in structural glazing silicone sealants.
In: Materials & Design, 182
doi: 10.1016/j.matdes.2019.108057
Article, Secondary publication

Rosendahl, Philipp Laurens ; Drass, Michael ; Schneider, Jens ; Becker, Wilfried (2018)
Crack nucleation in hyperelastic adhesive bonds.
Engineered Transparency 2018. Glass in Architecture and Structural Engineering.
doi: 10.1002/cepa.941
Conference or Workshop Item

Rühl, Andreas ; Kolling, Stefan ; Schneider, Jens (2017)
Characterization and modelling of poly(methyl methacrylate) and thermoplastic polyurethane for the application in laminated setups.
In: Mechanics of Materials, 113
Article

Rühl, Andreas ; Kolling, Stefan ; Kuntsche, Johannes K. ; Schneider, Jens ; Mönnich, Sebastian (2012)
Characterization and Modeling of Polymer Interlayers for Laminated Glass.
11. LS-Dyna Forum 2012.
Conference or Workshop Item

Reymendt, J. ; Schneider, Jens
eds.: Walraven, Joost C. ; Stoelhorst, Dick (2008)
Properties and Applications of DUCON ®. A Micro-Reinforced Ultra-High-Performance Concrete.
International fib-Symposium Tailor Made Concrete Structures. Amsterdam (19. – 22.05.2008)
Conference or Workshop Item

S

Seel, Matthias ; Chhadeh, Philipp Amir ; Thiele, Kerstin ; Akerboom, Robert ; Knaack, Ulrich (2022)
Additive manufacturing of glass for the built environment: potential and challenges.
Built Environment Additive Manufacturing: BE-AM 2022. Frankfurt/Main (16.11.22)
Conference or Workshop Item

Schwind, Gregor ; Paschke, Franz ; Schneider, Jens (2022)
Case Studies on the Thermally Induced Stresses in Insulating Glass Units via Numerical Calculation.
Challenging Glass Conference 8. Ghent (23.06.2022)
doi: 10.47982/cgc.8.388
Conference or Workshop Item

Schwind, Gregor ; Rosendahl, Philipp Laurens ; Seel, Matthias ; Schneider, Jens (2022)
Hochtemperaturfestigkeit von geglühtem Kalk‐Natronsilicatglas.
doi: 10.1002/cepa.1669
Conference or Workshop Item

Strauss, Alfred ; Spyridis, Panagiotis ; Zambon, Ivan ; Sattler, Fabian ; Apostolidi, Eftychia (2022)
Quality Control Method for the Service Life and Reliability of Concrete Structures.
In: Infrastructures, 7 (2)
doi: 10.3390/infrastructures7020024
Article

Schuster, Miriam ; Schneider, Jens (2022)
Linear viskoelastisches Materialverhalten von teilkristallinen Zwischenschichten.
In: Glasbau 2022, Edition: 1. Auflage
doi: 10.1002/cepa.1675
Book Section

Schuster, Miriam (2022)
Characterization of laminated safety glass interlayers – Thermorheology, Crystallinity and Viscoelasticity.
Technische Universität Darmstadt
doi: 10.26083/tuprints-00021741
Ph.D. Thesis, Primary publication, Publisher's Version

Schuster, Miriam ; Schneider, Jens (2022)
Linear viskoelastisches Materialverhalten teilkristalliner Zwischenschichten.
In: ce/papers, 5 (1)
doi: 10.26083/tuprints-00022439
Article, Secondary publication, Publisher's Version

Strauss, Alfred ; Sattler, Fabian ; Hoffmann, Markus ; Apostolidi, Eftychia ; Fernandes, S. ; Matos, Jose
eds.: Yokota, Hiroshi ; Frangopol, Dan M. (2021)
Performance indicators for European bridge management.
doi: 10.1201/9780429279119-271
Conference or Workshop Item

Schwind, Gregor ; von Blücher, Fabian ; Drass, Michael ; Schneider, Jens (2021)
Experimental investigations on the fracture strength of soda-lime silica glass at elevated temperatures.
Engineered Transparency 2021. digital (30. August 2021)
doi: 10.1002/cepa.1631
Conference or Workshop Item

Spyridis, Panagiotis ; Strauss, Alfred ; Zambon, Ivan ; Sattler, Fabian ; Apostolidi, Eftychia
eds.: Júlio, Eduardo ; Valença, Jónatas ; Louro, A. S. (2021)
Quality of execution in life cycle performance of structures - background concept and case study on fastenings in concrete.
Conference or Workshop Item

Schuster, Miriam ; Thiele, Kerstin
eds.: Weller, Bernhard ; Schneider, Jens ; Louter, Christian ; Tasche, Silke (2021)
Investigations on the viscoelastic material behaviour and linearity limits of PVB.
Conference or Workshop Item

Schulz, Isabell ; Drass, Michael ; Teich, Martien ; Schneider, Jens
eds.: Weller, Bernhard ; Tasche, Silke (2021)
Planungsschritte zur Umsetzung eines Ganzglaspavillons nach dem Faltwerkprinzip.
Conference or Workshop Item

Stefanoudakis, Dimitrios ; Apostolidi, Eftychia
ed.: Lampropoulos, Andreas (2020)
Strengthening and Modernization of a Characteristic Masonry Building in Vienna, Austria.
In: Case Studies on Conservation and Seismic Strengthening/Retrofitting of Existing Structures
Book Section

Schwind, Gregor ; Blücher, Fabian von ; Drass, Michael ; Schneider, Jens (2020)
Double ring bending tests on heat pretreated soda-lime silicate glass.
In: Glass Structures & Engineering, 5 (3)
doi: 10.1007/s40940-020-00129-3
Article

Schuster, Miriam ; Schneider, Jens ; Nguyen, Tuong An (2020)
Investigations on the execution and evaluation of the Pummel test for polyvinyl butyral based interlayers.
In: Glass Structures & Engineering
doi: 10.1007/s40940-020-00120-y
Article

Schuster, Miriam ; Schneider, Jens ; Nguyen, Tuong An (2020)
Investigations on the execution and evaluation of the Pummel test for polyvinyl butyral based interlayers.
In: Glass Structures & Engineering, 5
doi: 10.1007/s40940-020-00120-y
Article

Sygusch, Nikolai (2019)
Stochastic approach to rupture probability of short glass fiber reinforced polypropylene based on three-point-bending tests.
TU Darmstadt
Ph.D. Thesis

Schuster, Miriam ; Kraus, Michael ; Schneider, Jens ; Siebert, Geralt (2019)
Investigations on the visco- and hyper-elastic behaviour of polyvinylbutyral interlayers at different temperatures.
Glass Performance Days. Tampere, Finland (27 June 2019)
Conference or Workshop Item

Seel, Matthias ; Akerboom, Robert (2019)
Additive Fertigung von Glas im Bauwesen.
In: VDG Nachrichten (www.vdg-ev.org), 45 (3)
Article

Seel, M. ; Akerboom, R. ; Knaack, U. ; Oechsner, M. ; Hof, P. ; Schneider, J. (2018)
Fused glass deposition modelling for applications in the built environment.
In: Materialwissenschaft und Werkstofftechnik, 49 (7)
doi: 10.1002/mawe.201800075
Article

Sarakinioti, M. V. ; Turrin, Michela ; Konstantinou, Thaleia ; Tenpierik, Martin ; Knaack, Ulrich (2018)
Developing an integrated 3D-printed façade with complex geometries for active temperature control.
In: Materials Today Communications, (15)
doi: 10.1016/j.mtcomm.2018.02.027
Article

Sarakinioti, M. V. ; Konstantinou, Thaleia ; Turrin, Michela ; Tenpierik, Martin ; Loonen, R. C. G. M. ; Klijn-Chevalerias, M. L. de ; Knaack, Ulrich (2018)
Development and prototyping of an integrated 3D-printed façade for thermal regulation in complex geometries.
In: Journal of Facade Design and Engineering, 6 (2)
doi: 10.7480/jfde.2018.2.2081
Article

Staudt, Yves (2018)
Proposal of a Failure Criterion of Adhesively Bonded Connections with Silicone.
Technische Universität
Ph.D. Thesis, Primary publication

Schneider, Jens ; Müller-Braun, Steffen ; Peters, Timon ; Pourmoghaddam, Navid ; Schuster, Miriam (2018)
Neue Dimensionen beim Bauen mit Glas.
22. Dresdner Baustatik-Seminar. Dresden
Conference or Workshop Item

Schuster, Miriam ; Kraus, Michael ; Schneider, Jens ; Siebert, Geralt (2018)
Untersuchungen zum Zeit‐Temperatur‐Superpositions‐Prinzip von Steifigkeiten polymerer Verbundglaszwischenschichten.
DGM FA Polymerwerkstoffe. Kassel
Conference or Workshop Item

Schuster, Miriam ; Kraus, Michael ; Schneider, Jens ; Siebert, Geralt (2018)
Investigations on the thermorheologically complex material behaviour of the laminated safety glass interlayer ethylene-vinyl-acetate.
In: Glass Structures & Engineering, 3 (2)
doi: 10.1007/s40940-018-0074-9
Article

Seel, Matthias ; Akerboom, Robert ; Knaack, Ulrich ; Oechsner, Matthias ; Hof, Peter ; Schneider, Jens (2018)
Additive manufacturing of glass components – exploring the potential of glass connections by fused deposition modeling.
In: CGC6, Challenging Glass 6, Conference on Architectural and Structural Applications of Glass. Louter, Bos, Belis, Veer, Nijsse (Eds.), Delft University of Technology, May 2018. Delft: TU, 2018, S. 381 – 388 (https://doi.org/10.7480/cgc.6.2161) <reviewed>
Book Section

Seel, Matthias ; Akerboom, Robert ; Knaack, Ulrich ; Oechsner, Matthias ; Hof, Peter ; Schneider, Jens (2018)
Fused glass deposition modelling for applications in the built environment. – Schmelzschichten aus Glas für Anwendungen im Bauwesen.
In: Materialwissenschaft und Werkstofftechnik 49 (2018), 7, S. 870 – 880. ISSN 0933-5137, 1521-4052 <reviewed>
Article

Schneider, Jens ; Hilcken, Jonas (2017)
Nickel Sulphide (NiS-) induced failure of glass : fracture mechanics model and verification by fracture data.
In: engineered transparency international conference at glasstec, 2010
Book Section

Schuster, Miriam ; Kuntsche, Johannes K. ; Schneider, Jens (2017)
Investigation of the viscoelastic material behaviour of laminated safety glass interlayers.
91. Glastechnische Tagung. Weimar
Conference or Workshop Item

Schneider, Jens ; Neugebauer, Jürgen ; Schuster, Miriam ; Peters, Timon (2017)
Cold-bent thin glass laminates for architectural applications: Computational design and material modeling.
IASS. Hamburg
Conference or Workshop Item

Schuster, Miriam ; Kraus, Michael (2017)
Testing, rheological modelling and design of interlayer materials in laminated safety glass.
Workshop at Glass Performance Days. Tampere
Conference or Workshop Item

Schneider, Jens ; Aronen, Antti ; Hilcken, Jonas ; Nielsen, Jens ; Karvinen, Reijo ; Olesen, John F. (2016)
Stress relaxation in tempered glass caused by heat soak testing.
In: Engineering Structures, 122
doi: 10.1016/j.engstruct.2016.04.024
Article

Schneider, Jens ; Schula, Sebastian (2016)
Simulating soft body impact on glass structures.
In: ICE Journal Structures and Buildings, Special Issue on Glass Structures, 169 (6)
Article

Schneider, Jens ; Kuntsche, Johannes K. ; Schuster, Miriam (2016)
Mechanisches Verhalten von polymeren Zwischenschichten in Verbundglas.
Glas im konstruktiven Ingenieurbau 14. Hochschule München – Fakultät für Bauingenieurwesen, Verein der Freunde des Stahlbaus an der Hochschule München e.V. (03.03.-04.03.2016)
Conference or Workshop Item

Strauß, Holger ; Knaack, Ulrich (2016)
Additive manufacturing for Future Facades: The potential of 3D printed parts for the building envelope.
In: Journal of Facade Design and Engineering, 3 (3-4)
Article

Schneider, Jens ; Kuntsche, Johannes K. ; Schula, Sebastian ; Schneider, Frank ; Wörner, Johann-Dietrich (2016)
Glasbau - Grundlagen, Berechnung, Konstruktion.
Book

Schula, Sebastian (2015)
Charakterisierung der Kratzanfälligkeit von Gläsern im Bauwesen = Characterisation of the scratch sensitivity of glasses in civil engineering.
TU Darmstadt
Ph.D. Thesis

Schneider, Jens ; Becker, Matthias ; Drass, Michael ; Pullamthara, Jiny Jose (2015)
Strukturanalyse, Messung und Modellierung mit terrestrischem Radar und inversem Finite-Element Ansatz.
Data

Schneider, Jens ; Becker, M. ; Drass, Michael ; Pullamthara, J. (2015)
Strukturanalyse, Messung und Modellierung mit terrestrischem Radar und inversem Finite-Element Ansatz“, Interdisziplinäre Messaufgaben im Bauwesen.
Event: Darmstadt
Lecture

Strauss, Alfred ; Apostolidi, Eftychia ; Zimmermann, Thomas ; Gerhaher, Ulrich ; Dritsos, Stephanos (2014)
Experimental investigations of fibre and steel reinforced elastomeric bearings: shear modulus and damping coefficient.
In: Engineering Structures, 75
doi: 10.1016/j.engstruct.2014.06.008
Article

Schneider, Jens ; Garrecht, Harald ; Maier, Andreas ; Gilka-Bötzow, Albrecht (2014)
Ein multifunktionales und energetisch aktives Fassadenelement aus Beton.
In: Bautechnik, 91 (3)
Article

Schneider, Jens ; Schula, Sebastian ; Kuntsche, Johannes K. (2014)
Chancen und Risiken beim Bauen mit Glas.
18. Dresdner Baustatik-Seminar "Chancen und Risiken in der Tragwerksplanung". Dresden (17.10.2014)
Conference or Workshop Item

Schneider, Jens ; Kuntsche, Johannes K. (2014)
Rückhaltesysteme für geklemmte Verbundglasplatten bei Explosionsbeanspruchung.
Fachtagung Baustatik-Baupraxis 12. Technische Universität München / Universität der Bundeswehr Münschen (24. – 25. Februar 2014)
Conference or Workshop Item

Schober, Kay-Uwe ; Becker, Wieland ; Drass, Michael ; Weber, Jan (2014)
High-performance timber composite joints for spatial round wood truss structures.
13th World Conferece on Timber Engineering WCTE 2014. Quebec City Canada (10.-14.08.2014)
Conference or Workshop Item

Schober, Kay-Uwe ; Kuechler, Michael ; Drass, Michael (2014)
Advancement of glued-in rods using polymer concrete as composite material.
13th World Conferece on Timber Engineering WCTE 2014. Quebec City Canada (10.-14.08.2014)
Conference or Workshop Item

Schober, Kay-Uwe ; Drass, Michael ; Kuechler, M. (2014)
Glued-inrods in timber joints: Characterization of failure modes dependent on the test set-up.
Experimental Research with Timber - Cost FP1004 ESR conference. Prague Czech Republic (21.-23.05.2014)
Conference or Workshop Item

Schula, Sebastian ; Schneider, Jens ; Vandebroek, M. ; Belis, J. (2013)
Fracture strength of glass, engineering testing methods and estimation of characteristic values.
COST Action TU0905, Mid-term Conference on Structural Glass, London, UK: Taylor & Francis Group..
Conference or Workshop Item

Schober, Kay-Uwe ; Drass, Michael ; Becker, Wieland (2013)
Adhesive strength of timber joints with unconventional glued-in rods.
Wood Adhesives 2013. Toronto, ON, Canada (09.-11.10.2013)
Conference or Workshop Item

Schober, Kay-Uwe ; Drass, Michael (2013)
Concrete-based adhesives used in connections.
Enhance mechanical properties of timber, engineerred wood products and timber structures - COST FP1004 ESR conference. Nicosia, Cyprus
Conference or Workshop Item

Strauss, Holger (2013)
AM Envelope: The potential of Additive Manufacturing for facade construction.
TU Delft
Ph.D. Thesis

Schneider, Jens ; Kuntsche, Johannes K. (2012)
Glas contra Sprengstoff - Anforderungen an explosionshemmende Verglasungen.
In: Glaswelt, (11)
Article

Schneider, Jens ; Kolling, Stefan ; Kuntsche, Johannes K. ; Mönnich, Sebastian (2012)
Tensile properties of different polymer interlayers under high strain rates.
In: Engineered Transparency 2012
Book Section

Schneider, Jens ; Kuntsche, Johannes K. ; Kleuderlein, Jonas (2012)
Load-Bearing Capacity of Thin Film Photovvoltaic Modules.
In: Challenging Glass 3
Book Section

Schneider, Jens ; Kleuderlein, Jonas ; Kuntsche, Johannes K. (2012)
Tragfähigkeit von Dünnschicht-Photovoltaik-Modulen.
In: Glasbau 2012
Book Section

Schober, Kay-Uwe ; Drass, Michael (2012)
Advanced interface interaction in timber engineering joints.
Enhance mechanical properties of timber, engineerred wood products and timber structures - COST FP1004 ESR conference. Zagreb
Conference or Workshop Item

Schober, Kay-Uwe ; Becker, Wieland ; Drass, Michael (2012)
Advanced interface interaction in timber engineering joints with dowel-type fasteners embedded in high-performance ceramic fillers.
12th World Conference on Timber Engineering WCTE 2012. Auckland New Zealand (15.-19.07.2012)
Conference or Workshop Item

Schneider, Jens ; Hilcken, Jonas ; Kasper, Andreas (2012)
Ein Modell zur Bestimmung der Versagenswahrscheinlichkeit von heißgelagertem ESG.
In: Glasbau Stahlbau, 81 (S1)
Article

Strauss, H. ; Knaack, Ulrich (2012)
AM envelope : potentials of additive manufacturing for facade construction.
Conference or Workshop Item

Strauss, H. ; Knaack, Ulrich
ed.: Schwickert, S. (2012)
Baukonstruktion.
In: Abschlussbericht ESPOF
Book Section

Schneider, Jens ; Kuntsche, J. ; Kleuderlein, J.
eds.: Bos, F. ; Louter, C. ; Nijsse, R. ; Veer, F. (2012)
Load-Bearing Capacity of Thin Film Photovoltaic Modules.
Conference or Workshop Item

Schneider, Jens ; Franz, J.
eds.: Schneider, J. ; Weller, B. (2012)
Classification of the material properties of interlayers for laminated glass regarding the post-breakage behavior.
Conference or Workshop Item

Schneider, Jens ; Kuntsche, J. (2012)
Glas contra Sprengstoff – Anforderungen an explosionshemmende Verglasungen.
In: Glaswelt, (11)
Article

Schneider, Jens ; Schula, Sebastian ; Weinhold, W. P. (2012)
Characterisation of the scratch resistance of annealed and tempered architectural glass.
In: Thin Solid Films, 520 (12)
doi: 10.1016/j.tsf.2011.04.104
Article

Schneider, Jens ; Schmidt, H. ; Wacker, J.
eds.: Beer, G. ; Dünser, C. ; Hofstetter, G. ; Theiner, Y. (2011)
Windbeanspruchung und Aussteifung von Reiheneckhäusern und Reihenmittelhäusern – experimentelle und probabilistische Untersuchung.
Fachtagung der Lehrstühle und Institute für Baustatik,. Universität Innsbruck (21. – 22.02.2011)
Conference or Workshop Item

Schneider, Jens ; Schula, S.
eds.: Beer, G. ; Dünser, C. ; Hofstetter, G. ; Theiner, Y. (2011)
Zwei Verfahren zum rechnerischen Nachweis der dynamischen Beanspruchung von Verglasungen durch weichen Stoß.
Fachtagung der Lehrstühle und Institute für Baustatik. Universität Innsbruck (21. – 22.02.2011)
Conference or Workshop Item