TU Darmstadt / ULB / TUbiblio

Blättern nach Person

Ebene hoch
Exportieren als [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Gruppiere nach: Keine Gruppierung | Typ des Eintrags | Publikationsjahr | Sprache
Springe zu: 2019 | 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2008 | 2007 | 2006 | 2004 | 2003 | 2002 | 2000 | 1999 | 1998 | 1995 | 1989
Anzahl der Einträge: 60.

2019

Nadgir, O. ; Dornisch, W. ; Müller, R. ; Keip, M.-A. (2019)
A phase-field model for transversely isotropic ferroelectrics.
In: Archive of Applied Mechanics, 89 (6)
doi: 10.1007/s00419-019-01543-y
Artikel, Bibliographie

2018

Hotz, H. ; Kirsch, B. ; Becker, S. ; Harbou, E. von ; Müller, R. ; Aurich, J. C. (2018)
Modification of surface morphology during cryogenic turning of metastable austenitic steel AISI 347 at different parameter combinations with constant CO2 consumption per cut.
In: Procedia CIRP, 77
doi: 10.1016/j.procir.2018.08.287
Artikel, Bibliographie

Hotz, H. ; Kirsch, B. ; Becker, S. ; Harbou, E. von ; Müller, R. ; Aurich, J. C. (2018)
Improving the surface morphology of metastable austenitic steel AISI 347 in a two-step turning process.
In: Procedia CIRP, 71
doi: 10.1016/j.procir.2018.05.090
Artikel, Bibliographie

Wu, F. ; Li, X.-Y. ; Chen, W.-Q. ; Kang, G.-Z. ; Müller, R. (2018)
Indentation on a transversely isotropic half-space of multiferroic composite medium with a circular contact region.
In: International Journal of Engineering Science, 123
doi: 10.1016/j.ijengsci.2017.11.013
Artikel, Bibliographie

2017

Li, X.-Y. ; Zheng, R.-F. ; Chen, W.-Q. ; Kang, G.-Z. ; Gao, C.-F. ; Müller, R. (2017)
Three-dimensional exact magneto-electro-elastic field in an infinite transversely isotropic space with an elliptical crack under uniform loads: Shear mode.
In: International Journal of Engineering Science, 116
doi: 10.1016/j.ijengsci.2017.03.013
Artikel, Bibliographie

Sobota, P. M. ; Dornisch, W. ; Müller, R. ; Klinkel, S. (2017)
Implicit dynamic analysis using an isogeometric Reissner-Mindlin shell formulation.
In: International Journal for Numerical Methods in Engineering, 110 (9)
doi: 10.1002/nme.5429
Artikel, Bibliographie

Li, P.-D. ; Li, X.-Y. ; Kang, G.-Z. ; Gao, C.-F. ; Müller, R. (2017)
Crack tip electric polarization saturation of a thermally loaded penny-shaped crack in an infinite thermo-piezo-elastic medium.
In: International Journal of Solids and Structures, 117
doi: 10.1016/j.ijsolstr.2017.04.003
Artikel, Bibliographie

Dornisch, W. ; Stöckler, J. ; Müller, R. (2017)
Dual and approximate dual basis functions for B-splines and NURBS – Comparison and application for an efficient coupling of patches with the isogeometric mortar method.
In: Computer Methods in Applied Mechanics and Engineering, 316
doi: 10.1016/j.cma.2016.07.038
Artikel, Bibliographie

Li, X.-Y. ; Wang, Y.-W. ; Li, P.-D. ; Kang, G.-Z. ; Müller, R. (2017)
Three-dimensional fundamental thermo-elastic field in an infinite space of two-dimensional hexagonal quasi-crystal with a penny-shaped/half-infinite plane crack.
In: Theoretical and Applied Fracture Mechanics, 88
doi: 10.1016/j.tafmec.2016.11.005
Artikel, Bibliographie

2016

Kuhn, C. ; Müller, R. (2016)
A discussion of fracture mechanisms in heterogeneous materials by means of configurational forces in a phase field fracture model.
In: Computer Methods in Applied Mechanics and Engineering, 312
doi: 10.1016/j.cma.2016.04.027
Artikel, Bibliographie

Wang, Z. P. ; Wang, T. ; Li, P. D. ; Li, X. Y. ; Chen, W. Q. ; Müller, R. (2016)
Three-dimensional fundamental thermo-elastic solutions applied to contact problems.
In: Journal of Applied Physics, 120 (17)
doi: 10.1063/1.4966602
Artikel, Bibliographie

Schneider, F. ; Bischof, R. ; Kirsch, B. ; Kuhn, C. ; Müller, R. ; Aurich, J. C. (2016)
Investigation of Chip Formation and Surface Integrity when Micro-cutting cp-Titanium with Ultra-fine Grain Cemented Carbide.
In: Procedia CIRP, 45
doi: 10.1016/j.procir.2016.02.257
Artikel, Bibliographie

Cojocari, O. ; Sobornytskyy, N. ; Weickhmann, C. ; Jakoby, R. ; Semenov, A. ; Hübers, H. ; Müller, R. ; Hoehl, A. (2016)
Quasi optical Schottky diode detectors for fast ultra-wideband detection.
2016 IEEE International Conference on Microwave and Millimeter Wave Technology (ICMMT).
Konferenzveröffentlichung, Bibliographie

Dornisch, W. ; Müller, R. ; Klinkel, S. (2016)
An efficient and robust rotational formulation for isogeometric Reissner–Mindlin shell elements.
In: Computer Methods in Applied Mechanics and Engineering, 303
doi: 10.1016/j.cma.2016.01.018
Artikel, Bibliographie

Li, X.-Y. ; Zheng, R.-F. ; Kang, G.Z. ; Chen, W.-Q. ; Müller, R. (2016)
Closed-form field in an infinite space of transversely isotropic multiferroic composite medium with an elliptical or penny-shaped crack: 3D exact analysis.
In: International Journal of Solids and Structures, 80
doi: 10.1016/j.ijsolstr.2015.10.026
Artikel, Bibliographie

2015

Christmann, J. ; Müller, R. ; Webber, Kyle G. ; Isaia, Daniel ; Schader, Florian H. ; Kipfstuhl, S. ; Freitag, J. ; Humbert, A. (2015)
Measurement of the fracture toughness of polycrystalline bubbly ice from an Antarctic ice core.
In: Earth System Science Data, 7
doi: 10.1594/PANGAEA.835321.
Artikel, Bibliographie

Wang, T. ; Li, X. Y. ; Zhang, X. ; Müller, R. (2015)
Fundamental solutions in a half space of two-dimensional hexagonal quasicrystal and their applications.
In: Journal of Applied Physics, 117 (15)
doi: 10.1063/1.4918535
Artikel, Bibliographie

Schrade, D. ; Keip, M.-A. ; Thai, H. ; Schröder, J. ; Svendsen, B. ; Müller, R. ; Gross, D. (2015)
Coordinate-invariant phase field modeling of ferro-electrics, part I: Model formulation and single-crystal simulations: Coordinate-invariant phase field modeling of ferro-electrics, part I: Model formulation and single-crystal simulations.
In: GAMM-Mitteilungen, 38 (1)
doi: 10.1002/gamm.201510005
Artikel, Bibliographie

Keip, M.-A. ; Schrade, D. ; Thai, H. ; Schröder, J. ; Svendsen, B. ; Müller, R. ; Gross, D. (2015)
Coordinate-invariant phase field modeling of ferro-electrics, part II: Application to composites and poly-crystals: Coordinate-invariant phase field modeling of ferro-electrics, part II: Application to composites and poly-crystals.
In: GAMM-Mitteilungen, 38 (1)
doi: 10.1002/gamm.201510006
Artikel, Bibliographie

Schrade, D. ; Müller, R. ; Gross, D. ; Steinmann, P. (2015)
Phase field simulations of the poling behavior of BaTiO3 nano-scale thin films with SrRuO3 and Au electrodes.
In: European Journal of Mechanics - A/Solids, 49
doi: 10.1016/j.euromechsol.2014.08.007
Artikel, Bibliographie

2014

Fischer, F. D. ; Predan, J. ; Müller, R. ; Kolednik, O. (2014)
On problems with the determination of the fracture resistance for materials with spatial variations of the Young’s modulus.
In: International Journal of Fracture, 190 (1-2)
doi: 10.1007/s10704-014-9972-2
Artikel, Bibliographie

Martin, Sebastian ; Beidl, Christian ; Fischer, Sebastian ; Müller, R. (2014)
Vergleich von Radialverdichter und Drehkolbenlader für elektrische Zusatzaufladung – Automatisierung und Energiebilanzierung am Engine-in-the-Loop-Motorenprüfstand.
19. Aufladetechnische Konferenz. Dresden
Konferenzveröffentlichung, Bibliographie

Martin, Sebastian ; Beidl, Christian ; Müller, R. (2014)
Responsiveness of a 30 bar BMEP 3-cylinder engine: opportunities and limits of turbocharged downsizing.
SAE World Congress. Detroit (April 2014)
Konferenzveröffentlichung, Bibliographie

Schrade, D. ; Müller, R. ; Gross, D. ; Keip, M.-A. ; Thai, H. ; Schröder, J. (2014)
An invariant formulation for phase field models in ferroelectrics.
In: International Journal of Solids and Structures, 51 (11-12)
doi: 10.1016/j.ijsolstr.2014.02.021
Artikel, Bibliographie

Martin, Sebastian ; Beidl, Christian ; Münz, Markus ; Müller, R. (2014)
Potenziale elektrischer Zusatzaufladung mit neuen Regelungskonzepten.
1. Internationaler Motorenkongress. Baden-Baden (18. & 19.02.2014)
Konferenzveröffentlichung, Bibliographie

Spahn, J. ; Andrä, H. ; Kabel, M. ; Müller, R. (2014)
A multiscale approach for modeling progressive damage of composite materials using fast Fourier transforms.
In: Computer Methods in Applied Mechanics and Engineering, 268
doi: 10.1016/j.cma.2013.10.017
Artikel, Bibliographie

Schmitt, R. ; Kuhn, C. ; Müller, R. ; Bhattacharya, K. (2014)
Crystal Plasticity and Martensitic Transformations: A Phase Field Approach.
In: Technische Mechanik - European Journal of Engineering Mechanics, 34 (1)
doi: 10.24352/UB.OVGU-2017-051
Artikel, Bibliographie

2013

Schrade, D. ; Müller, R. ; Gross, D. (2013)
On the physical interpretation of material parameters in phase field models for ferroelectrics.
In: Archive of Applied Mechanics, 83 (10)
doi: 10.1007/s00419-013-0754-5
Artikel, Bibliographie

Khalaquzzaman, M. ; Xu, Bai-Xiang ; Ricker, S. ; Müller, R. (2013)
Computational Homogenization of Piezoelectric Materials using FE2 to determine Configurational Forces.
Multiscale Material Modelling. Kaiserslautern (June 30 - July 1, 2011)
Konferenzveröffentlichung, Bibliographie

Zangmeister, T. ; Andrä, H. ; Müller, R. (2013)
Comparison of XFEM and Voxelbased FEM for the Approximation of Discontinuous Stress and Strain at Material Interfaces.
In: Technische Mechanik - European Journal of Engineering Mechanics, 33 (2)
Artikel, Bibliographie

Schmitt, R. ; Wang, B. ; Urbassek, H. M. ; Müller, R. (2013)
Modeling of Martensitic Transformations in Pure Iron by a Phase Field Approach Using Information from Atomistic Simulation.
In: Technische Mechanik - European Journal of Engineering Mechanics, 33 (2)
Artikel, Bibliographie

2012

Plate, C. ; Müller, R. ; Humbert, A. ; Gross, D. (2012)
Evaluation of the criticality of cracks in ice shelves using finite element simulations.
In: The Cryosphere, 6 (5)
doi: 10.5194/tc-6-973-2012
Artikel, Bibliographie

Khalaquzzaman, M. ; Xu, Bai-Xiang ; Ricker, S. ; Müller, R. (2012)
Computational Homogenization of Piezoelectric Materials using FE2 to determine Configurational Forces.
In: Technische Mechanik - European Journal of Engineering Mechanics, 32 (1)
Artikel, Bibliographie

2011

Hoffmann, S. ; André, M. ; Rodríguez Sśnchez, A. ; Müller, R. (2011)
A RVE-based micro mechanical model for short fiber reinforced plastic materials including matrix damage and fiber fracture.
In: PAMM, 11 (1)
doi: 10.1002/pamm.201110069
Artikel, Bibliographie

Timmel, M. ; Kaliske, M. ; Kolling, S. ; Müller, R. (2011)
On configurational forces in hyperelastic materials under shock and impact.
In: Computational Mechanics, 47 (1)
doi: 10.1007/s00466-010-0537-6
Artikel, Bibliographie

Dineva, P. ; Gross, D. ; Müller, R. ; Rangelov, T. (2011)
Dynamic stress and electric field concentration in a functionally graded piezoelectric solid with a circular hole.
In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 91 (2)
doi: 10.1002/zamm.201000140
Artikel, Bibliographie

Konchakova, N. ; Müller, R. ; Barth, F. J. (2011)
Modelling of damage evolution in adhesive metal-composite structures for various joint designs.
In: Mechanics and Control, 30 (4)
Artikel, Bibliographie

2010

Konchakova, N. ; Balle, F. ; Barth, F.J. ; Müller, R. ; Eifler, D. ; Steinmann, P. (2010)
Finite element analysis of an inelastic interface in ultrasonic welded metal/fibre-reinforced polymer joints.
In: Computational Materials Science, 50 (1)
doi: 10.1016/j.commatsci.2010.07.024
Artikel, Bibliographie

Müller, R. ; Xu, Bai-Xiang ; Gross, D. ; Lyschik, M. ; Schrade, D. ; Klinkel, S. (2010)
Deformable dielectrics – optimization of heterogeneities.
In: International Journal of Engineering Science, 48 (7-8)
doi: 10.1016/j.ijengsci.2010.03.001
Artikel, Bibliographie

Humbert, A. ; Gross, D. ; Müller, R. ; Braun, M. ; van de Wal, R.S.W. ; van den Broeke, M.R. ; Vaughan, D.G. ; van de Berg, W.J. (2010)
Deformation and failure of the ice bridge on the Wilkins Ice Shelf, Antarctica.
In: Annals of Glaciology, 51 (55)
doi: 10.3189/172756410791392709
Artikel, Bibliographie

2008

Schrade, D. ; Müller, R. ; Gross, D. (2008)
Interpretation of parameters in phase field models for ferroelectrics.
In: PAMM, 8 (1)
doi: 10.1002/pamm.200810527
Artikel, Bibliographie

2007

Wellmann, P. J. ; Hens, P. ; Sakwe, S. A. ; Queren, D. ; Müller, R. ; Durst, Karsten ; Göken, M. (2007)
Impact of n-type versus p-type doping on mechanical properties and dislocation evolution during SiC crystal growth.
In: Materials Science Forum, (556-557)
doi: 10.4028/www.scientific.net/MSF.556-557.259
Artikel, Bibliographie

2006

Werthschützky, Roland ; Müller, R. ; Nuber, M. (2006)
Selbstüberwachung und Störungstoleranz von Sensoren.
Konferenzveröffentlichung, Bibliographie

Müller, R. ; Nuber, M. ; Werthschützky, Roland (2006)
Selbstüberwachung von druckbasierten Durchflusssensoren.
Konferenzveröffentlichung, Bibliographie

2004

Müller, R. ; Gross, D. ; Maugin, G. A. (2004)
Use of material forces in adaptive finite element methods.
In: Computational Mechanics, 33 (6)
doi: 10.1007/s00466-003-0543-z
Artikel, Bibliographie

2003

Kolling, S. ; Müller, R. ; Gross, D. (2003)
The influence of elastic constants on the shape of an inclusion.
In: International Journal of Solids and Structures, 40 (17)
doi: 10.1016/S0020-7683(03)00183-5
Artikel, Bibliographie

Blechschmidt, Ronald A. ; Müller, R. ; Werthschützky, Roland (2003)
Telemetrisches Meßsystem zur Bestimmung des Druckes der Zunge gegen den Gaumen.
In: Biomedizinische Technik
Artikel, Bibliographie

2002

Gross, D. ; Müller, R. ; Kolling, S. (2002)
Configurational forces – morphology evolution and finite elements.
In: Mechanics Research Communications, 29 (6)
doi: 10.1016/S0093-6413(02)00296-3
Artikel, Bibliographie

Müller, R. ; Maugin, G. A. (2002)
On material forces and finite element discretizations.
In: Computational Mechanics, 29 (1)
doi: 10.1007/s00466-002-0322-2
Artikel, Bibliographie

Müller, R. ; Gross, D. (2002)
Modelling of Microstructure Evolution in Two-Phase Materials using Generalized Driving Forces.
In: PAMM, 1 (1)
doi: 10.1002/1617-7061(200203)1:1<20::AID-PAMM20>3.0.CO;2-J
Artikel, Bibliographie

Müller, R. ; Kolling, S. ; Gross, D. (2002)
On configurational forces in the context of the finite element method.
In: International Journal for Numerical Methods in Engineering, 53 (7)
doi: 10.1002/nme.351
Artikel, Bibliographie

2000

Müller, R. ; Eckert, S. ; Gross, D. (2000)
3D equilibrium shapes of periodically arranged anisotropic precipitates with elastic misfit.
In: Archives of Mechanics, 52 (4-5)
Artikel, Bibliographie

Hoschek, Josef ; Müller, R. (2000)
Turbine blade design by lofted B-spline surfaces.
In: Journal of computational and applied mathematics, 119
Artikel, Bibliographie

Müller, R. ; Gross, D. (2000)
3D Equilibrium Shapes of Misfitting Precipitates in Anisotropic Materials.
In: ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 80 (S2)
doi: 10.1002/zamm.20000801470
Artikel, Bibliographie

1999

Müller, R. ; Gross, D. (1999)
3D inhomogeneous, misfitting second phase particles-equilibrium shapes and morphological development.
In: Computational Materials Science, 16 (1)
doi: 10.1016/S0927-0256(99)00045-2
Artikel, Bibliographie

Lembke, U. ; Hoell, A. ; Kranold, R. ; Müller, R. ; Schüppel, W. ; Goerigk, G. ; Gilles, R. ; Wiedemann, A. (1999)
Formation of magnetic nanocrystals in a glass ceramic studied by small-angle scattering.
In: Journal of Applied Physics, 85 (4)
doi: 10.1063/1.369538
Artikel, Bibliographie

1998

Schmidt, Ingo ; Müller, R. ; Gross, D. (1998)
The effect of elastic inhomogeneity on equilibrium and stability of a two particle morphology.
In: Mechanics of Materials, 30 (3)
doi: 10.1016/S0167-6636(98)00047-7
Artikel, Bibliographie

Müller, R. ; Gross, D. (1998)
3D simulation of equilibrium morphologies of precipitates.
In: Computational Materials Science, 11 (1)
doi: 10.1016/S0927-0256(97)00193-6
Artikel, Bibliographie

1995

Kleinmann, Karl ; Last, B. ; Müller, R. (1995)
Calibrations of a multi-component force measuring system using a CMAC-type neural network.
SAS '95. Berlin
Konferenzveröffentlichung, Bibliographie

1989

Rohmert, Walter ; Müller, R. (1989)
REFA-Sonderseminar "Klimagestaltung".
Veranstaltung: Klimagestaltung. Darmstadt THD
Vorlesung, Seminar, Lehrmaterial, Bibliographie

Diese Liste wurde am Tue Mar 26 04:34:44 2024 CET generiert.