TU Darmstadt / ULB / TUbiblio

Target State Optimization: Drivability Improvement for Vehicles with Dual Clutch Transmissions

Schmiedt, Marius ; He, Ping ; Rinderknecht, Stephan (2022)
Target State Optimization: Drivability Improvement for Vehicles with Dual Clutch Transmissions.
In: Applied Sciences, 2022, 12 (20)
doi: 10.26083/tuprints-00022832
Artikel, Zweitveröffentlichung, Verlagsversion

Kurzbeschreibung (Abstract)

Vehicles with dual clutch transmissions (DCT) are well known for their comfortable drivability since gear shifts can be performed jerklessly. The ability of blending the torque during gear shifts from one clutch to the other, making the type of automated transmission a perfect alternative to torque converters, which also comes with a higher efficiency. Nevertheless, DCT also have some drawbacks. The actuation of two clutches requires an immense control effort, which is handled in the implementation of a wide range of software functions on the transmission control unit (TCU). These usually contain control parameters, which makes the behavior adaptable to different vehicle and engine platforms. The adaption of these parameters is called calibration, which is usually an iterative time-consuming process. The calibration of the embedded software solutions in control units is a widely known problem in the automotive industry. The calibration of any vehicle subsystem (e.g., engine, transmission, suspension, driver assistance systems for autonomous driving, etc.) requires costly test trips in different ambient conditions. To reduce the calibration effort and the accompanying use of professionals, several approaches to automize the calibration process are proposed. Due to the fact that a solution is desired which can optimize different calibration problems, a generic metaheuristic approach is aimed. Regardless, the scope of the current research is the optimization of the launch behavior for vehicles equipped with DCT since, particularly at low speeds, the transmission behavior must meet the intention of the driver (drivers tend to be more perceptive at low speeds). To clarify the characteristics of the launch, several test subject studies are performed. The influence factors, such as engine sound, maximal acceleration, acceleration build-up (mean jerk), and the reaction time, are taken into account. Their influence on the evaluation of launch with relation to the criteria of sportiness, comfort, and jerkiness, are examined based on the evaluation of the test subject studies. According to the results of the study, reference values for the optimization of the launch behavior are derived. The research contains a study of existing approaches for optimizing driving behavior with metaheuristics (e.g., genetic algorithms, reinforcement learning, etc.). Since the existing approaches have different drawbacks (in scope of the optimization problem) a new approach is proposed, which outperforms existing ones. The approach itself is a hybrid solution of reinforcement learning (RL) and supervised learning (SL) and is applied in a software in the loop environment, and in a test vehicle.

Typ des Eintrags: Artikel
Erschienen: 2022
Autor(en): Schmiedt, Marius ; He, Ping ; Rinderknecht, Stephan
Art des Eintrags: Zweitveröffentlichung
Titel: Target State Optimization: Drivability Improvement for Vehicles with Dual Clutch Transmissions
Sprache: Englisch
Publikationsjahr: 2022
Ort: Darmstadt
Publikationsdatum der Erstveröffentlichung: 2022
Verlag: MDPI
Titel der Zeitschrift, Zeitung oder Schriftenreihe: Applied Sciences
Jahrgang/Volume einer Zeitschrift: 12
(Heft-)Nummer: 20
Kollation: 29 Seiten
DOI: 10.26083/tuprints-00022832
URL / URN: https://tuprints.ulb.tu-darmstadt.de/22832
Zugehörige Links:
Herkunft: Zweitveröffentlichung DeepGreen
Kurzbeschreibung (Abstract):

Vehicles with dual clutch transmissions (DCT) are well known for their comfortable drivability since gear shifts can be performed jerklessly. The ability of blending the torque during gear shifts from one clutch to the other, making the type of automated transmission a perfect alternative to torque converters, which also comes with a higher efficiency. Nevertheless, DCT also have some drawbacks. The actuation of two clutches requires an immense control effort, which is handled in the implementation of a wide range of software functions on the transmission control unit (TCU). These usually contain control parameters, which makes the behavior adaptable to different vehicle and engine platforms. The adaption of these parameters is called calibration, which is usually an iterative time-consuming process. The calibration of the embedded software solutions in control units is a widely known problem in the automotive industry. The calibration of any vehicle subsystem (e.g., engine, transmission, suspension, driver assistance systems for autonomous driving, etc.) requires costly test trips in different ambient conditions. To reduce the calibration effort and the accompanying use of professionals, several approaches to automize the calibration process are proposed. Due to the fact that a solution is desired which can optimize different calibration problems, a generic metaheuristic approach is aimed. Regardless, the scope of the current research is the optimization of the launch behavior for vehicles equipped with DCT since, particularly at low speeds, the transmission behavior must meet the intention of the driver (drivers tend to be more perceptive at low speeds). To clarify the characteristics of the launch, several test subject studies are performed. The influence factors, such as engine sound, maximal acceleration, acceleration build-up (mean jerk), and the reaction time, are taken into account. Their influence on the evaluation of launch with relation to the criteria of sportiness, comfort, and jerkiness, are examined based on the evaluation of the test subject studies. According to the results of the study, reference values for the optimization of the launch behavior are derived. The research contains a study of existing approaches for optimizing driving behavior with metaheuristics (e.g., genetic algorithms, reinforcement learning, etc.). Since the existing approaches have different drawbacks (in scope of the optimization problem) a new approach is proposed, which outperforms existing ones. The approach itself is a hybrid solution of reinforcement learning (RL) and supervised learning (SL) and is applied in a software in the loop environment, and in a test vehicle.

Freie Schlagworte: parameter optimization, deep learning, machine learning, reinforcement learning, driving behavior, dual clutch transmission, launch optimization, launch evaluation
Status: Verlagsversion
URN: urn:nbn:de:tuda-tuprints-228322
Zusätzliche Informationen:

This article belongs to the Special Issue Application of Artificial Intelligence in Mechatronics

Sachgruppe der Dewey Dezimalklassifikatin (DDC): 600 Technik, Medizin, angewandte Wissenschaften > 620 Ingenieurwissenschaften und Maschinenbau
Fachbereich(e)/-gebiet(e): 16 Fachbereich Maschinenbau
16 Fachbereich Maschinenbau > Institut für Mechatronische Systeme im Maschinenbau (IMS)
Hinterlegungsdatum: 04 Nov 2022 12:07
Letzte Änderung: 07 Nov 2022 09:53
PPN:
Zugehörige Links:
Export:
Suche nach Titel in: TUfind oder in Google
Frage zum Eintrag Frage zum Eintrag

Optionen (nur für Redakteure)
Redaktionelle Details anzeigen Redaktionelle Details anzeigen