TU Darmstadt / ULB / TUbiblio

Parametric optimization of the effective thermal conductivity for a three-phase particle-filled composite

Marr, Julian ; Zartmann, Lukas ; Reinel-Bitzer, Doris ; Andrä, Heiko ; Müller, Ralf (2022)
Parametric optimization of the effective thermal conductivity for a three-phase particle-filled composite.
In: Computational Materials Science, 205
doi: 10.1016/j.commatsci.2022.111214
Artikel, Bibliographie

Kurzbeschreibung (Abstract)

Functionalized materials, consisting of a particle-filled polymer matrix, enable a considerable increase in thermal conductivity compared to standard plastics. This is particularly important in electromobility applications, e.g. in encapsulated circuit boards, to ensure sufficient thermal management. In this paper, a method for the optimi­ zation of the effective thermal conductivity (ETC) by considering electrically insulating composites is presented. To show the diversity of microstructural design options by using different filler/matrix compositions, the method is introduced by taking a particle-filled plastic with three phases and high contrast in the conductivities of the individual phases as example. Particles with different sizes and shapes in the micrometer range are considered. The task of setting a target ETC is formulated as a parameter optimization problem. The ETC is determined by microstructure simulation and numerical homogenization where virtually created representative volume ele­ ments (RVEs) are used. To study the influence of the different design variables, metamodeling and sensitivity analysis techniques are introduced. It turns out, that only the filler volume fraction, the aspect ratio and the proportions of the individual fillers are sensitive parameters. After neglecting non-sensitive parameters, global optimization in the reduced design space using an evolutionary algorithm is performed. The novelty of the paper is that several fillers with different microstructural parameters, such as diameter, aspect ratio and shape, are included as design variables in the structural optimization. Since the evaluation of the objective function of the structural optimization problem is very expensive, a cheaper surrogate model is introduced in the paper. This approach allows an efficient computation of microstructural realizations with a target ETC and can be extended to other microstructures and effective properties as well.

Typ des Eintrags: Artikel
Erschienen: 2022
Autor(en): Marr, Julian ; Zartmann, Lukas ; Reinel-Bitzer, Doris ; Andrä, Heiko ; Müller, Ralf
Art des Eintrags: Bibliographie
Titel: Parametric optimization of the effective thermal conductivity for a three-phase particle-filled composite
Sprache: Englisch
Publikationsjahr: 1 April 2022
Verlag: Elsevier
Titel der Zeitschrift, Zeitung oder Schriftenreihe: Computational Materials Science
Jahrgang/Volume einer Zeitschrift: 205
DOI: 10.1016/j.commatsci.2022.111214
URL / URN: https://www.sciencedirect.com/science/article/abs/pii/S09270...
Kurzbeschreibung (Abstract):

Functionalized materials, consisting of a particle-filled polymer matrix, enable a considerable increase in thermal conductivity compared to standard plastics. This is particularly important in electromobility applications, e.g. in encapsulated circuit boards, to ensure sufficient thermal management. In this paper, a method for the optimi­ zation of the effective thermal conductivity (ETC) by considering electrically insulating composites is presented. To show the diversity of microstructural design options by using different filler/matrix compositions, the method is introduced by taking a particle-filled plastic with three phases and high contrast in the conductivities of the individual phases as example. Particles with different sizes and shapes in the micrometer range are considered. The task of setting a target ETC is formulated as a parameter optimization problem. The ETC is determined by microstructure simulation and numerical homogenization where virtually created representative volume ele­ ments (RVEs) are used. To study the influence of the different design variables, metamodeling and sensitivity analysis techniques are introduced. It turns out, that only the filler volume fraction, the aspect ratio and the proportions of the individual fillers are sensitive parameters. After neglecting non-sensitive parameters, global optimization in the reduced design space using an evolutionary algorithm is performed. The novelty of the paper is that several fillers with different microstructural parameters, such as diameter, aspect ratio and shape, are included as design variables in the structural optimization. Since the evaluation of the objective function of the structural optimization problem is very expensive, a cheaper surrogate model is introduced in the paper. This approach allows an efficient computation of microstructural realizations with a target ETC and can be extended to other microstructures and effective properties as well.

Zusätzliche Informationen:

Artikel-Id: 111214

Fachbereich(e)/-gebiet(e): 13 Fachbereich Bau- und Umweltingenieurwissenschaften
13 Fachbereich Bau- und Umweltingenieurwissenschaften > Fachgebiete der Mechanik
13 Fachbereich Bau- und Umweltingenieurwissenschaften > Fachgebiete der Mechanik > Fachgebiet Kontinuumsmechanik
Hinterlegungsdatum: 04 Mai 2022 12:45
Letzte Änderung: 03 Aug 2022 12:10
PPN:
Export:
Suche nach Titel in: TUfind oder in Google
Frage zum Eintrag Frage zum Eintrag

Optionen (nur für Redakteure)
Redaktionelle Details anzeigen Redaktionelle Details anzeigen