TU Darmstadt / ULB / TUbiblio

Large Eddy Simulation of a laboratory-scale gas-assisted pulverized coal combustion chamber under oxy-fuel atmospheres using tabulated chemistry

Nicolai, H. ; Kuenne, G. ; Knappstein, R. ; Schneider, H. ; Becker, L. G. ; Hasse, C. ; Di Mare, F. ; Dreizler, A. ; Janicka, J. (2020)
Large Eddy Simulation of a laboratory-scale gas-assisted pulverized coal combustion chamber under oxy-fuel atmospheres using tabulated chemistry.
In: Fuel, 272
doi: 10.1016/j.fuel.2020.117683
Artikel, Bibliographie

Kurzbeschreibung (Abstract)

This paper analyses a new gas-assisted pulverized coal combustion chamber, specially designed for the validation of numerical models under oxy-fuel atmospheres. For this purpose, an overall method is developed based on Large Eddy Simulation (LES) for oxy-fuel pulverized coal combustion chambers. One essential aspect of this is the embedding of a 4D Flamelet Generated Manifold (FGM) table coupled with an artificially thickened flame (ATF) model in the Euler-Lagrange (EL) framework. The four dimensions of the generated manifold represent the finite rate chemistry, mixing of volatiles, and char products and heat losses in the gas phase. Before the model is applied in the combustion chamber, its validity is demonstrated utilizing verification cases. Subsequently, the simulation results of the combustion chamber are validated and discussed with the help of the available measurement data. Operating points with increasing complexity are investigated, starting with a single-phase case that analyzes the reproduction of the assisting methane flame based on tabulated chemistry coupled with ATF. For the validation process, velocity fields from Particle Image Velocimetry (PIV) are used as well as flame positions from planar laser-induced fluorescence of the OH radical (OH-PLIF). Subsequently, operating conditions using different coal mass flows are investigated. To validate the flame stabilization mechanism, velocity data for the near burner region are available. Further examinations of the gas-assisted coal flame are carried out, in particular the influence of the coal particles on the flame stabilization mechanism is carried out.

Typ des Eintrags: Artikel
Erschienen: 2020
Autor(en): Nicolai, H. ; Kuenne, G. ; Knappstein, R. ; Schneider, H. ; Becker, L. G. ; Hasse, C. ; Di Mare, F. ; Dreizler, A. ; Janicka, J.
Art des Eintrags: Bibliographie
Titel: Large Eddy Simulation of a laboratory-scale gas-assisted pulverized coal combustion chamber under oxy-fuel atmospheres using tabulated chemistry
Sprache: Englisch
Publikationsjahr: 15 Juli 2020
Verlag: Elsevier
Titel der Zeitschrift, Zeitung oder Schriftenreihe: Fuel
Jahrgang/Volume einer Zeitschrift: 272
DOI: 10.1016/j.fuel.2020.117683
Kurzbeschreibung (Abstract):

This paper analyses a new gas-assisted pulverized coal combustion chamber, specially designed for the validation of numerical models under oxy-fuel atmospheres. For this purpose, an overall method is developed based on Large Eddy Simulation (LES) for oxy-fuel pulverized coal combustion chambers. One essential aspect of this is the embedding of a 4D Flamelet Generated Manifold (FGM) table coupled with an artificially thickened flame (ATF) model in the Euler-Lagrange (EL) framework. The four dimensions of the generated manifold represent the finite rate chemistry, mixing of volatiles, and char products and heat losses in the gas phase. Before the model is applied in the combustion chamber, its validity is demonstrated utilizing verification cases. Subsequently, the simulation results of the combustion chamber are validated and discussed with the help of the available measurement data. Operating points with increasing complexity are investigated, starting with a single-phase case that analyzes the reproduction of the assisting methane flame based on tabulated chemistry coupled with ATF. For the validation process, velocity fields from Particle Image Velocimetry (PIV) are used as well as flame positions from planar laser-induced fluorescence of the OH radical (OH-PLIF). Subsequently, operating conditions using different coal mass flows are investigated. To validate the flame stabilization mechanism, velocity data for the near burner region are available. Further examinations of the gas-assisted coal flame are carried out, in particular the influence of the coal particles on the flame stabilization mechanism is carried out.

Freie Schlagworte: Pulverized coal combustion, Oxy-fuel, FGM tabulated chemistry, Large Eddy Simulation
Fachbereich(e)/-gebiet(e): 16 Fachbereich Maschinenbau
16 Fachbereich Maschinenbau > Fachgebiet Simulation reaktiver Thermo-Fluid Systeme (STFS)
Hinterlegungsdatum: 15 Mai 2020 12:18
Letzte Änderung: 02 Feb 2023 10:28
PPN:
Export:
Suche nach Titel in: TUfind oder in Google
Frage zum Eintrag Frage zum Eintrag

Optionen (nur für Redakteure)
Redaktionelle Details anzeigen Redaktionelle Details anzeigen